Fabric Inspection Policy
-
Upload
zaman-parvez -
Category
Documents
-
view
9 -
download
0
Transcript of Fabric Inspection Policy
FABRIC INSPECTION POLICY
To measure maximum 4’ defects point in a yard AAQC (American Association of Quality Control) is called 4 point System.
Firstly, we receive the fabric as per packing list and then we store in a “Quarantine Area”. From quarantine area we take 10% fabric for inspection by 4 points system.
Points to be consider while inspection:
1. Defects must be measured defects length wise.2. Defect within 1”-2” of selvedge is not considered.3. Maximum penalty points per yard are 4 points.4. The unit of yard is square yard.
Formula for 4 point system is :
Total penalty point 100------------------------- X -------------------- X 36Length of Fabric Fabric Width
Penalty point to be considered:
1. Defects less than 3” = 1 point2. Defects within 3” to 6” = 2 point3. Defects within 6” to 9” = 3 point4. Defects from 9” to above = 4 point5. Defects for any hole = 4 point
Grading Table:Points
(Per 100 Sqr Yds)Grade Fabric Type
1 to 10 A Elite Fabric11 to 20 B Shady Fabric21 to 30 C C Grade Fabric
31 to above F Not Considered0 Zenith Zenith
Zenith fabric is faultless and maximum 25 Yds length.