FAASTeam CFI Workshop 7

55
Presented to: Instructors and Pilot Examiners By: Dennis H. Whitley ATP-CFII-MEL- SEL-AGI-IGI Date: April 1 to June 30, 2010 Federal Aviation Administration FAASTeam FAASTeam CFI Workshop 7 CFI Workshop 7 Module 7, Core Topics 13 and 14: - Effective Teaching - FAA / Industry Training Standards – FITS

description

FAASTeam CFI Workshop 7. Module 7, Core Topics 13 and 14:. Effective Teaching FAA / Industry Training Standards – FITS. FAASTeam CFI Workshop 7. Module 7 – Core Topic 13 Effective Teaching: Understanding how people think and learn The “art of teaching” - PowerPoint PPT Presentation

Transcript of FAASTeam CFI Workshop 7

Presented to: Instructors and Pilot Examiners

By: Dennis H. Whitley ATP-CFII-MEL-SEL-AGI-IGI

Date: April 1 to June 30, 2010

Federal AviationAdministrationFAASTeam FAASTeam

CFI Workshop 7CFI Workshop 7

Module 7, Core Topics 13 and 14:

- Effective Teaching

- FAA / Industry Training Standards – FITS

2Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

FAASTeam CFI Workshop 7

Module 7 – Core Topic 13Effective Teaching:

• Understanding how people think and learn

• The “art of teaching”

• Psychological understanding / people skills

Are all of your students registered at FAASafety.gov?

3Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Core Topic 13 (Effective Teaching) Objectives

• Review attributes of an effective pilot who is also an effective instructor.

• Discuss barriers to learning and student psychological and physiological needs.

• Further develop and demonstrate the required knowledge, skills, and abilities needed to be an effective instructor.

• Introduce teaching methodologies used to help develop critical thinking skills for the instructor and pilot-in-training.

4Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

The Teaching Profession for Pilots

• Aviators Model Code of Conduct found at http://www.secureaviation.org/

• Aviation Instructor’s Handbook, found at

http://www.faa.gov/regulations_policies/handbooks_manuals/

5Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

• Provide the atmosphere for students to become seekers of information, not merely receptacles of information

• Be serious without creating excessive stress• Have a flexible teaching plan in mind, but be

ever on the lookout for the "teachable moment"• Be positive toward trainees - guard against

sending unintentional messages (disdain, condescension, racism, sexism, etc.).

• Be confident (not arrogant) and comfortable in not knowing everything.

Goals of Teaching

6Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

The Instructor

• Your personality shapes your teaching style• All teachers need practice teaching• Good flight instructors work at being good pilots and

good teachers• Good instructors are constantly looking for ways to

improve                                           • Teaching techniques must change with changes in

the aviation industry and environment (e.g. NextGen)•

7Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

The Learner (Pilot-in Training)

• Teaching style must incorporate different techniques for different trainees and different settings

• Set expectations with trainee• Barriers to learning:

– Boredom– Stress– Fatigue– Lack of motivations

• Motivational techniques

8Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Instructional Format

• The use of multiple instructional formats aids in meeting the variety of course objectives and enhances learning for the pilot-in-training

• Common instructional formats in aviation:– Independent reading, lecture, computer-assisted

instruction, demonstration, group discussion

• Common instructional tools in aviation:– Part task trainers, flight training devices, flight

simulators, aircraft

9Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Effective Teaching Techniques

• A new approach to teaching should be tried when it has been shown to be valid and reliable

• State what should be learned• Situate the topic in context• Involve trainees in the process by having them, present

the problem, respond to questions, summarize the findings and discussion, and research and report on unanswered questions

• Use questions effectively• Have trainee summarize the "take-home" points at the

end of the discussion/activity

10Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Trainee Evaluations

• Student-centered grading• Evaluate the trainee’s conceptual knowledge

and critical thinking skills• Rote (“Describe”) learning vs. Understanding

(Explain); Application (Practice, Perform); Correlation (Manage/Decide)

• Situational evaluations vs. training to the test• Valid and reliable measures• Evidence of learning

11Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

The Process of Learning

• Critical thinking - the use of those cognitive skills or strategies that increase the probability of a desirable outcome

• Reflective thinking - a part of the critical thinking process referring specifically to the processes of analyzing and making judgments about what has happened– Learners are aware of and control their learning by actively

assessing what they know, what they need to know, and how they bridge that gap – during learning situations

12Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Scenario-Based Training

• What is scenario-based training?• Why do we need it?

13Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

The “New” Flight Test Guide (1973)

14Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

The “New” Instrument RatingPractical Test Standards (2010)

15Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Example Practical Test Standards IntroductionIn preparation for each practical test, the examiner shall develop a written “plan of action” for each practical test. The “plan of action” is a tool, for the sole use of the examiner, to be used in evaluating the applicant. The plan of action need not be grammatically correct or in any formal format. The plan of action must contain all of the required AREAS OF OPERATION and TASKS and any optional TASKS selected by the examiner. The plan of action will include a scenario that allows the evaluation of as many required AREAS OF OPERATION and TASKS as possible without disruption. During the mission the examiner interjects problems and emergencies which the applicant must manage. It should be structured so that most of the AREAS OF OPERATION and TASKS are accomplished within the mission.

16Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Guidance for Scenario-Based Evaluations – FAA Order 8900.2

• Found on FAA’s Flight Standards Information System (FSIMS) at http://fsims.faa.gov/wdocs/orders/8900_2

17Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

A Real Scenario

• NTSB Report DCA07MA00– October 11, 2006– Crash During Turn Maneuver– Cirrus SR-20, N929CD – Manhattan, New York City

18Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

NTSB Probable Cause:

• The National Transportation Safety Board determines that the probable cause of this accident was the pilots’ inadequate planning, judgment, and airmanship in the performance of a 180º turn maneuver inside of a limited turning space.

19Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

The Rest of the Story

• How can you relate this accident scenario to the “art” of teaching?

• What are the technical and non-technical skills involved in this event?

• Design a training scenario that you think could have prevented this accident.

20Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

FAASTeam CFI Workshop 7Module 7, Core Topic #13

Questions?

Comments?

Ideas?

Quiz time ~

21Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

1. Which factor(s) affect perception?

a. Physical Organism

b. Goals and values

c. Self –concept

d. Time and opportunity

e. Element of threat

f. All of the above -

22Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

2. Rate the levels of learning from low to high:

a. Correlation, Rote, Understanding, Application

b. Rote, Understanding, Application, Correlation

c. Understanding, Rote, Application, Correlation

d. Application, Rote, Understanding, Correlation

23Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

3. What is learning?

4. Correlation is the lowest form of learning.

True or False

Answers Follow –

24Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

5. Which of the following are characteristics of a good test?

a. Validity

b. Usability

c. Objectivity

d. Comprehensiveness

e. Discrimination

f. All of the above

Answers Follow:

25Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

1. Which factor(s) affect perception?

a. Physical Organismb. Goals and valuesc. Self –conceptd. Time and opportunitye. Element of threat

f. All of the above

f. - Aviation Instructor’s Handbook

26Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

2. Rate the levels of learning from low to high:

a. Correlation, Rote, Understanding, Application

b. Rote, Understanding, Application, Correlation

c. Understanding, Rote, Application, Correlation

d. Application, Rote, Understanding, Correlation

b. – Aviation Instructor’s Handbook

27Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

3. What is learning?

Learning is defined as a change in behavior as a result of experience. - Aviation Instructor's Handbook, page 2-2

4. Correlation is the lowest form of learning.

True or False

False; Rote is the lowest form of learning – Aviation Instructor’s Handbook, page 4-29

28Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

5. Which of the following are characteristics of a good test?

a. Validity

b. Usability

c. Objectivity

d. Comprehensiveness

e. Discrimination

f. All of the above

f. All of the above plus, Reliability - Aviation Instructor’s Handbook (FAA-H-8083-9A) Page 5-4, 5

29Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

FAASTeam CFI Workshop #7

Take a Break!

30Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

FAASTeam CFI Workshop 7

Module 7 – Core Topic 14

FAA/Industry Training Standards

FITS:• A voluntary partnership between FAA, industry,

and academia.• Scenario‑based, learner‑focused training.• More convenient, more accessible training.• Non‑regulatory and incentive driven.

31Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Core Topic 14 (FITS) Objectives

• Understand what the purpose of FITS.• Become familiar with current FITS type

training programs.• Review the development and use of

scenario-based training.• Apply student-centered instructional skills

to teaching and evaluating.

32Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

FITS Overview

• What is FITS?• Why do we need FITS?• Who is involved with FITS?• How can you involved?

33Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

What is FITS?

• For FAA-Industry Training Standards training applications go to:

http://www.faa.gov/training_testing/training/fits/ then select:

– > FTIS Training and Curriculums (left menu)– > Flight Instructor Training Module (select)– > Volume 1, 2, and 3 (FITS Training Volumes)

34Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

What is FITS?

• FAA-Industry Training Standards• http://wtww.faa.gov/training_testing/

training/fits/• Non-regulatory (similar to Part 121 Airline

Advanced Qualification Program)• Originally conceived to be “a structured

way to teach pilots to safely, competently, and efficiently operate a technically advanced piston or light jet aircraft”

35Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

FITS Mission Statement

• Improve pilot learning to safely, competently, and efficiently operate a technically advanced piston or light jet aircraft in the modern National Airspace System (NAS).

• Implement training that reduces the human error element and accelerates acquisition of higher-level judgment and decision-making skills.  

36Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Who is Involved in FITS?

• Manufacturers• Training providers• Insurance• Associations

37Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

History Leading to FITS

• Pilot training has not evolved much in 60 years (Tom Glista, 2008)

• Technology outpaces training• Accident/incident causal factors show pilots

not keeping up with the automation or over dependence on automated functions

• Training science has developed new ways to teach highly complex skills

38Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Examples of FITS Courses• Generic

• Transition• Recurrent• Private/Instrument• Instructor• Avionics (GPS, MFD, and Glass Panel)

• Specific• Garmin 430/530• MTSU Private/Instrument

• Documents• FITS Criteria• Learner -centered grading• Levels of FITS acceptance• Designated Examiner’s Guide• Articles

39Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Benefits of FITS Training

• Originally targeted Technically Advanced Aircraft (TAA’s)

• Now used as a more efficient way to keep up with:– Changes in National Airspace System– Advances in equipment design– Need for more qualified pilots for commercial

operations

40Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Benefits of FITS TrainingPart 141 Pilot School

• Approved curriculum• “Reduced” training hours• Traditional checkride

FAA/Industry Training Standards (FITS)

• Scenario-based training• Emphasis on technically

advanced aircraft (TAA) and simulation

• Student-centered grading

Advanced Qualification Program (AQP)

• Approved curriculum• “Reduced” training events• Maneuvers validation• Performance-based

evaluations• Line Oriented Flight Training

(LOFT)• Emphasis on simulation• Crew-centered debriefings

41Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Role of Simulation in FITS• High utilization of simulators• Review simulator qualifications• How to teach in simulators and training

devices• ICAO Multi Crew Pilot License analogy

42Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Safety Record of TAA

• NTSB March 2010 safety study:

– Analyzed accident rates of over 8,000 small piston-powered airplanes manufactured between 2002 and 2006

– Found that those equipped with glass cockpits had a higher fatal accident rate than similar aircraft with conventional instruments

43Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Why?

• The Safety Board determined that because glass cockpits are both complex and vary from aircraft to aircraft in function, design and failure modes, pilots are not always provided with all of the information they need – both by aircraft manufacturers and the Federal Aviation Administration – to adequately understand the unique operational and functional details of the primary flight instruments in their airplanes.

44Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

NTSB 830

• 3/08/2010 Change for immediate notification• “A complete loss of information, excluding

flickering, from more than 50 percent of an aircraft’s cockpit displays known as:– Electronic Flight Instrument System (EFIS) displays;

Other displays of this type, which generally include a primary flight display (PFD), primary navigation display (PND), and other integrated displays...”

45Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Crew Resource Management (CRM)/Single Pilot Resource Management (SRM)

• Communication • Decision making • Situational awareness • Workload management • Resource management

46Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Automation Training

• Automation Management • Autoflight vs. manual flight philosophy • Flight management systems • EFIS displays and symbology • Autopilot modes • Flight mode annunciations • Flight guidance systems

47Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

Does FITS Work?

• Many manufacturers use FITS courses for their transition training

• Research studies indicate that FITS trained pilots have fewer setbacks in training than traditional program trainees

• More studies are underway to evaluate the FITS programs

• How can you get involved with FITS?

48Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

FAASTeam CFI Workshop #7Module 7, Core Topic 14

Questions?

Comments?

Ideas?

Quiz time ~

49Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

6. What is FITS?

7. What training standards are required for persons authorized to work on my aircraft and approve it for return to service?

8. FITS is a regulatory approach.

True or False

50Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

9. FITS is:

a. An FAA mandatory training requirement for operation a technically advanced aircraft.

b. A program that creates scenario based, learner focused training materials.

c. An approved method of developing skills to manage TAA aircraft.

d. An FAA approved method of training.

10. Most major aircraft manufacturers use FITS – certified syllabi for their transition-training programs.

True or False Answers Follow –

51Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

6. What is FITS?

FITS programs create scenario-based, learner-focused training methods that encourage practical application of knowledge and skills.

- faa.gov, page on FAA/Industry Training Standards (FITS)

52Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

7. What training standards are required for persons authorized to work on my aircraft and approve it for return to service?

Technicians/ mechanics must satisfy experience requirements established by the FARs to be eligible for a mechanic certificate, or have graduated from an FAA certified aviation maintenance technical school.

- FAR 65, subsection 65.77 (a), (b).

53Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

8. FITS is a regulatory approach.

True or False

False - FITS training and support CD

9. FITS is:

a. An FAA mandatory training requirement for operation a technically advanced aircraft.

b. A program that creates scenario based, learner focused training materials.

c. An approved method of developing skills to manage TAA aircraft.

d. An FAA approved method of training.

b. – FITS training and support CD

54Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

10. Most major aircraft manufacturers use FITS – certified syllabi for their transition-training programs.

True or False

True – AOPA Pilot of July 2006

55Federal AviationAdministration

FAASTeam CFI Workshop 7

April 1 through June 30, 2010

ThisThis Completes Completes

CFI Workshop Module CFI Workshop Module #7#7

with our sincere thanks to author Dr. Janeen with our sincere thanks to author Dr. Janeen KochanKochan

Be sure to have your attendance record validated!Be sure to have your attendance record validated!