F84C-5_SAT_ MSDS

download F84C-5_SAT_ MSDS

of 4

description

filtration

Transcript of F84C-5_SAT_ MSDS

  • CALFA CALFA CHEMICAL CO.,LTD

    TEL : 81-45-504-1120 1-19-6,TSURUMICHUOH,TSURUMIKU,YOKOHAMA JAPAN.FAX : 81-45-501-0843 1-19-6

    file No. F84C-5-1

    MATERIAL SAFETY DATA SHEET1/4

    IDENTITY ( as used on label and list )CALFASAT

    MANUFACTURER'S NAME : EMERGENCY TELEPHONE NUMBERCALFA CHEMICAL CO.,LTD 81-45-504-1120(key number )

    TELEPHONE NUMBER FOR INFORMATIONADDRESS : 81-45-504-1120 (key number )

    1-19-6, FAX NUMBERTsurumichuoh, 81-45-501-0843 (Research Laboratories )

    Tsurumi-ku, DATE PREPAREDYokohama-City, Japan. February 2, 2009

    SIGNATURE OF PREPARED ( Optional )H.KOIKE ( HIROYUKI KOIKE )

    SECTION . INGREDIENTS

    Bromochloro-5,5-dimethylhydantoin (CAS No. 16079-88-2)

    1,3-Dichloro-5,5-dimethylhydantoin (CAS No. 118-52-5)

    1,3-Dichloro-5-ethyl-5-methylhydantoin (CAS No. 89415-87-2)

    Chitosan (CAS No. 9012-76-4)

    Papain (CAS No. 9001-73-4)

    Carboxymethyl cellulose(CMC) (CAS No. 9000-11-7)

    Poval (CAS No. 25213-24-5)

    SECTION . PHYSICAL AND CHEMICAL PROPERTIES

    APPEARANCE : off-white briquettes pH : Not knownVISCOSITY : Not applicable ODOR : Very slight pungentBOILING POINT : Not applicable MELTING OR FREEZING POINT : 120148VAPOR DENSITY(Air=1) : Not applicable VAPOR PRESSURE (mmHg) : Not applicablePERCENT VOLATILE(by volume) : 0.5 SOLUBILITY IN WATER : 0.54gms/100gms @25EVAPORATION RATE (Bu Ac=1) : 1 SPECIFIC GRAVITY (H2O=1 ) : Not applicable

    SECTION . FIRE AND EXPLOSION INFORMATION

    FLASH POINT : 94 AUTO IGNITION TEMPERATURE : Not knownLOWER EXPLOSION LIMIT(%) : Not applicable UPPER EXPLOSION LIMIT(%) : Not applicable

    CALFA CHEMICAL CO.,LTD.

  • file No. F84C-4-2

    2/4

    EXTINGUISHING MEDIA FOAM : ALCOHOL FOAM : CO2DRY CHEMICAL : WATER : OTHER :

    SECTION . FIRE AND EXPLOSION INFORMATION (continued)

    SPECIAL FIRE FIGHTING PROCEDURES :To minimize the progressive generation of noxious gases, flood burning material with large quantitiesof water. Must wear NIOSH / MSHA approved self- contained breathing apparatus and protectiveclothing. Cool fire-exposed containers with water spray.

    UNUSUAL FIRE AND EXPLOSION HAZARDS :Material is a strong oxidizer and corrosive. May ignite combustible materials and may produce noxiousgases. Products of combustion are toxic.Airborne dusts of this product in an enclosed space and in the presence of an ignition source mayconstitute an explosion hazard. Use adequate explosion-proof ventilation systems to control dust at thesource. Avoid generating product dust near sources of ignition, including static electricity. Use safetymeasures in accordance with the 1988 edition of NFPA 654 ( Standard for the Prevention of DustExplosions in the Chemical, Dye, Pharmaceutical and Plastic Industries) .

    SECTION . HEALTH EFFECTS INFORMATION

    ROUTES OF ENTRY - SKIN CONTACT : EYE CONTACT : INHALATION : INGESTION :

    EFFECTS OF OVEREXPOSURE :Direct skin and eye contact can result in severe skin and eye irritation.Prolonged contact may produce irreversible damage. Inhalation of high concentrations can be severelyirritating to the lung with potential systemic absorption and tissue damage. Repeated skin exposuremay induce sensitization.

    OVEREXPOSURE MAY AGGRAVATE EXISTING CONDITIONS :No effects indicated.

    EMERGENCY AND FIRST AID PROCEDURES :Eyes : Flush eyes with large amounts of running water for at least 15 minutes. Hold eyelids apart toensure rinsing of the entire surface of the eye and lids with water. Get immediate medical attention.If physician not available, flush for additional 15 minutes and then transport victim to medical care.

    Skin : Immediately wipe away excess material with a dry cloth while removing contaminated clothingand shoes. Under safety shower, wash affected areas thoroughly with large amounts water, and soapif available, for at least 15 minutes. Get immediate medical attention. Discard or decontaminateclothing and shoes.

    Ingestion : If swallowed, immediately give 3-4 glasses of water. Do not induce vomiting. If vomitingoccurs, give fluids again. Get immediate medical attention. Have physician determine if patient'scondition allows induction of vomiting or evacuation of stomach. Do not give anything by mouth to anunconscious or convulsing person.

    Inhalation : Remove from area to fresh air. If not breathing, clear airway and start artificial respiration.If victim is having trouble breathing, give supplemental oxygen, if available. Get immediate medicalattention.

    CHEMICALS LISTED AS CARCINOGEN BY :

    NATIONAL TOXICOLOGY PROGRAM - NoI. A. R. C. MONOGRAPHS - NoOSHA - No

    CALFA CHEMICAL CO.,LTD.

  • file No. F84A-2-3

    3/4

    SECTION . REACTIVITY INFORMATION

    STABILITY : STABLE CONDITIONS TO AVOIDUNSTABLE None known ( Decomposes at 165 )

    HAZARDOUS DECOMPOSITION PRODUCTS :Thermal decomposition may produce toxic vapors / fumes of chlorine, bromine, organic materials andoxides of carbon and nitrogen.

    SECTION . REACTIVITY INFORMATION (continued)

    HAZARDOUS POLYMERIZATION CONDITIONS TO AVOIDMAY WILL NOT None knownOCCUR OCCUR

    INCOMPATIBILITY ( MATERIALS TO AVOID )WATER OTHER Strong acids and alkalis, high storage temperatures, moisture

    and readily oxidizable material.

    SECTION . SPILL AND DISPOSAL INFORMATION

    STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLEDDanger ! Oxidizing and corrosive material. Dust explosion hazard. Do not get in eyes or on skin. Donot breath dust. For spills, wear appropriate protective gear, and respiratory protection. Where dustmay be generated, wear full face respiraroty protection, and remove all sources of ignition. For largespills, or when spilled material comes in contact with water, self - contained breathing apparatus ispreferred.

    Carefully sweep up spilled material (avoid generating dust )and place in an appropriate container fordisposal. Do not contaminate with oxidizable materials. Neutralize any residue with dilute, alkalinesodium bisulfate or thiosulfate solution ; absorb with sand or vermiculite and place in compatiblecontainer for disposal. If spilled material is wet, neutralize and proceed as stated above.

    Material is toxic to fish. Do not discharge into lakes, streams, ponds or public water unless inaccordance with an NPDES permit.

    WASTE DISPOSAL METHODSDispose of in compliance with all federal, state and local laws and regulations.Incineration is the preferred method. Relatively small quantities of product may be neutralized asstated above, and if in accordance with local laws and the operators of the local sewage treatmentplant, the neutralized material may be discharged into the sewer system.

    SECTION . PERSONAL PROTECTION INFORMATION

    VENTILATION TYPE :In processes where dusts or airborne particulates may be generated, proper ventilation must beprovided in accordance with good ventilation practices.

    RESPIRATORY PROTECTION :In processes where dusts or airborne particulates may be generated, a NIOSH / MSHA jointlyapproved respirator is advised in the absence of proper environmental controls.

    PROTECTIVE GLOVES :Rubber or neoprene, to prevent skin contact.

    EYE PROTECTION :Wear chemical goggles where there is a potential for eye contact. Use safety glasses with side shieldsunder normal use conditions.

    OTHER PROTECTIVE EQUIPMENT :Eye wash ; safety shower ; protective clothing ( long sleeves, coveralls or other, as appropriate ) , toprevent skin contact.

    CALFA CHEMICAL CO.,LTD.

  • file No. F84C-4-4

    4/4

    SECTION . STORAGE AND HANDLING

    PRECAUTIONS FOR STORAGE AND HANDLING :Do not breath dust. Avoid generating dust. Store in a cool, dry place, isolated from all organic material.Product is a strong oxidizer and is corrosive. Avoid heat and direct sunlight.Do not allow product to come in contact with oxidizable material. Keep container closed.

    SECTION . TOXICOLOGY INFORMATION

    - oral LD50 (rat): 468 mg/kg- eye irritation (rabbit): severe irritant and corrosive ( product tissue distruction to both abraded and

    unabraded skin - primary irritation index = 110 ) .- skin irritation (rabbit - Draize test) : corrosive to both abraded and unabraded skin.- skin corrosivity (rabbit - US DOT test ) : not corrosive- severely irritating to the lung upon inhalation with potential systemic absorption and tissue damage.- LC50 (rainbow trout - 96 hours) : 0. 5 mg / l- LC50 (bluegill sunfish - 96 hours) : 1. 2 mg / l- LC50 (daphnia magna - 48 hours) : 0. 4 mg / l- LC50 (mysid shrimp - 96 hours) : 0. 93 mg / l- LC50 (sheepshead minnow - 96 hours) : 1. 4 mg / l (as Br2)- EC50 (eastern oysters - 96 hours) : 0. 84 mg / l (as Br2)

    For 1,3-Dichloro-5,5-dimethylhydantoin :- skin sensitization (guinea pig - Buehler Test): skin sensitizer

    CALFA CHEMICAL CO.,LTD.