F700 Version-Up Presentation

7/27/2019 F700 Version-Up Presentation

1/26

PVH-???-###PVH-???-###

Mitsubishi Electric Automation, Inc.F700 Version Up Series VFD

Empowering Greater Overall Equipment Effectiveness

Delivering Lower Total Cost of Ownership

Overview

New Features


2/26

MODEL CONFIGURATION

Inverter type

Model lineupApplied Motor

kW 0.75 1.5 2.2 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160 185 220 250 280 315 355 400 450 500 560Three-phase

200V class

FR-F720--NA - - - - - - - - - - - -

Three-phase

400V class

FR-F740--NA

Danfoss

ABB

Yask.


3/26

NEW FEATURES

Pre-Charge Function used with PID control

Detection of Current Input choose reaction

Second PID function RT input triggers

Direct Setting for PID set-point on FR-PU07-01

Units Indicator for PID control CFM, GPM, PSI

Three Line Selectable Monitor on FR-PU07-01

Hand/Auto Indication on FR-PU07-01

Built in PLC download pre-config. pump functions Two Option Ports expand available I/O points

Built in BACnet Mitsubishi / ABB / Trane


4/26

NEW MANUALS


5/26

Ideal for Pumps

Pre-charge function (Pr.760 to Pr. 769)

This function is to drive the motor at a certain speed before starting PID

control

The motor is operated at Pr. 127 PID control automatic switchover

frequencyat start until a pre-charge ending condition is satisfied

PID control starts after a pre-charge ending condition is satisfied This function is useful for a pump with a long hose

Without this function, PID control would start before the pump is filled

with water, and proper control would not be performed

Pre-charge function is also valid for a start after the PID output

suspension (SLEEP). PID output suspension (SLEEP) function is not

performed until the pre-charge operation ends


6/26

Ideal for Pumps

Pre-charge Operation (Pr.761)

When the measured amount reaches the pre-charge ending level


7/26

Ideal for Pumps

Pre-charge Operation (Pr. 762)

When the elapsed time reaches the pre-charge ending time


8/26

Ideal for Pumps

Pre-charge Operation

When the signal is input to end the pre-charge operation


9/26

Detection for current input (Pr. 573, Pr. 777, Pr. 778)


10/26

Detection for current input (Pr. 573, Pr. 777, Pr. 778)


11/26

Second PID function (Pr.753 to Pr. 758, Pr.765 to Pr.769)

Possible to exchange the PID control loop by the RT terminal.

Direct setting for PID set-point

Easy to change the PID set-point with the

parameter unit (FR-PU07-01).

Direct setting menu is displayed by the one

button (FUNC button).


12/26

Unit Indicator for PID Control

Possible to exchange the PID control loop by the RT terminal.

Possible to change the unit indicator for the PID

monitors and PID parameters on the parameter

unit (FR-PU07-01).

Ex.

PSI(Pound-force per Square Inch)

GPM(Gallon per Minute)

CFM(Cubic Feet per Minute)

Ideal for Fans and Pumps


13/26


Three line selectable monitor

Possible to display the value of the selected

monitor at the three line monitors.

The parameter unit (FR-PU07-01) is required.

Operation key and operation mode indication

The operation key and the

operation mode indication of the

parameter unit (FR-PU07-01) are

HAND and AUTO.


14/26

Built-in PLC


Ability to create custom control programs- 4K steps of memory

- Download pre-configured pump functions


15/26

Two Option Ports Permitted

Expand available I/O points such

as digital inputs and outputs,

Form C relays and analog


Only one Comm. Card at a timeTwo of the same I/O Cards not permitted


16/26

Built in BACnet MS/TP X...


17/26

Built in BACnet MS/TP


18/26



19/26



20/26



21/26



22/26

Energy Savings Easy to ObserveThe effect of energy savings can be confirmed using the operation

panel, output terminal (AM, CA terminal) and via networks with the

newly developed energy saving monitor .

Reminders


23/26

PID sleep function

Reminders

Possible to reduce energy consumption in the

low-efficiency, low-speed range. (Sleep function)

Advanced PID function can

control multiple motors (4 motors

maximum).

Possible to control by switchingbetween the inverter-driven

operation and commercial power-

driven operation.

Multiple motors control


24/26

NEXT STEPS

Controlled Testing of Flux Optimization


25/26

Thank you very muchfor your attention


26/26

F700 Version-Up Presentation

Documents

Transcript of F700 Version-Up Presentation