~f

STEAM+XWiiN

MT-600

TENS/EMS

Electronic Pulse Massager

USER MANUAL

Thank You for Choosing

MT-600 Electronic Pulse Massager

MT-600 Electronic Pulse Massager is a convenient and effective device to help relieving pain without the use of drugs. Combing both therapeutic methods ofTENS and EMS in one unit, it can be used for chronic nerve and muscle pain relief, massage, as well as muscle stimulation.

The device is extremely easy to operate. 15 therapeutic modes are pre-programmed to simplify the setup procedure. Each mode is specially designed according to research to effectively target different parts of the body, or simulate different massage techniques.

On the safety aspect, MT-600 offers a unique Auto Safety feature that will automatically cut off the output pulse when electrode pads are not making proper contact. Medical grade connecting wires are also used to prevent electrical leaks.

MT-600 is also very reliable. With proper care and usage, it will bring you many years of comfort and well-being.

We hope you will enjoy using this product and sincerely wish you a great health.

For more product information, Please visit us at steam2care.com

About TENS and EMS

TENS (Transcutaneous Electrical Nerve Stimulation) is used by delivering stimulating pulses across the surface of the skin and along the nerve strands. The stimulating pulses help to relief pain by preventing pain signals from reaching the brain. It also help stimulate your body to produce higher levels of Endorphins (your body's natural painkiller).

EMS (Electrical Muscle Stimulation) is used effectively to prevent, or reduce muscle atrophy which commonly occurs after injuries or surgeries. EMS also helps by increasing blood flow to muscles, range of motion, muscle strength, as well as enhancing muscle endurance. It also helps to relief muscle related pain, such as spastic muscle, sore muscle and tight muscles

Both methods have been proven to be an effective pain therapy option to help ease the effects of acute or chronic pain.

Package Content

1 x- MT-600 Device Unit 2x- Electrode Pad Wires (1 wire per channel) 4x- Electrode Pads (2 pads per wire) 1 x- Belt clip 3x- AAA batteries 1 x- User Manual

Buttons and Functions

LCD Display Screen

Channel Output Port

Screen Display Indications

Pre-Programmed Modes l 1 Countdown 1 Timer

@![Lj@ NECK BACK ffi WAIST HIP HAND \..:J ELBW WRST KNEE

PAUSE

3D MUSCL ANKL FEET

KNEAD TAP

CH '" ~ (j) fLf Intensity Setting _j J ofChannel1

Battery Level

RNDM nO

CH ® '" fLf

L Intensity Setting ofChannel2

15 Pre-Programmed Modes

SHLDR Shoulder WRST Wrist NECK Neck KNEE Knee BACK Back MUSCL Muscle WAIST Waist ANKL Ankel HIP Hip FEET Feet HAND Hand KNEAD Knead ELBW Elbow TAP Tap RNDM Random

How to Use

0 Install 3 AAA batteries into the device. Do not power ON yet.

e Connect the Electrode Pad Wire to the Channel Output port.

0 0

0

G

0

If you are using just one channel, do not connect the second Electrode Pad Wire.

Adhere the electrode pads firmly to the skin of the area you are treating.

Turn the power ON by pressing the ON/OFF button.

Press the Mode Selection button to choose the mode you desire.

The Intensity Setting on the display screen should read Zero (0) initially. Press the Intensity Increase(+) button of the connected channel. Each press on the button will increase the intensity by 1. Set it to the level you are comfortable with.

Press the Timer button to adjust the duration time (in minutes) of your therapy session. The default time is 30 minutes. Each press will increase the duration time by 5 minutes.

To decrease the Intensity Setting, press the Intensity Decrease (-) button. Each press will decrease the intensity by 1.

() If no button is pressed in 5 seconds, the Auto Keylock will be activated. Some buttons are locked to prevent your settings from being altered accidentally. To disengage, press and hold the Intensity Decrease(-) button for 3 seconds.

How to Use (continued)

«!) If Mode is changed during the therapy session, all Intensity setting will resume back to zero (0) for safety. You will need to set the intensity again.

Tips and Device Care

High intensity settings are not necessarily more effective. We recommend setting the intensity level you are most comfortable with, or start with a lower intensity for a few sessions first before increasing.

If you should feel stinging on your skin, it could be an indication that the electrode pads are not properly adhered to your skin. It occurs when the electrode pads are drying out, or your skin is dry (especially during winter). In such event, we recommend wiping your skin with a wet towel first before applying the electrode pads. Also, in some cases, electorde pads might not attach well on hairy skin or skin with excessive oil.

Electrode pads need to be replaced over a period of time. To extend the life of electrode pads, you can try rising it under tap water and let it dry. If you are finished using the device, please always adhere the pads back to the small square plastic sheets that were on the electrode pads originally. Always keep the adhesive side clean.

If you plan not to use the device for an extended period of time, please always remove the batteries to prevent acid leaks from the battery, resulting damage to the device.

Auto Safety Feature

MT-600 is equipped with Auto Safety Feature which cuts off both channels' output pulse automatically once it detects the electrode pads are not making proper contacts to your skin. It will stop the device automatically and resume all intensity settings back to zero (0) to prevent discomfort or shock.

In such event, you should check if any electrode pads are not properly adhere to your skin. You can also try rinsing the adhesive side of the electrode pads under tap water or wipe your skin with a wet towel. If not improved, it could be the time to replace your electrode pads.

Important Safety Warning

This device is for external use only. Do not use this device on eyes, throat, front of the neck, broken or irritated skin, numb skin, cancerous (malignant) tissue, spinal column, through chest using anterior and posterior position, head or any area that causes current to flow transcerebrally. Stop using this device immediately at any sign of discomfort. Please consult your physician before use if you are suffering from any disease, such as acute disease, metastatic disease, heart disease, or with implanted devices and etc., on any person with epilepsy, or in pregnancy.

Do not use this device while driving, operating any machinery, close to water or any environment that may endanger the user. Keep out the reach of children