Couplings-component 94.20-94.20 v4.00 Page l oJ3

, RDW Vehic]e Techno]ogy Division

THE NETHERLANDS(NEDERLAND)

\d))-EC TYPE-APPROV AL CERTIFICATE

Communication conceming the:

-type approval- extension of type-approval- refusal of type appro\TQl- withdra'.val of type approyal

of a type of a component with regard to Directive 94/20/EC.

Type-approval number (1) : e4*94/20*94/20*0376*06

Reason for extension : constructive modifications

Approval mark : e400-0376

0.1.

SECTION I

Make (trade name ofmanufacturer) : STEELPRESS

0.2. Type and general commercialdescription(s) : ZSK-750, coupling head

0.3. Means of identification of type, ifmarked on the vchiele/component/separate teelHliealunit (2) : Make (trade name) and type

0.3.1. Location of that marking : on housing

0.5. Name and address of manufacturer : STEELPRESS Sp. z 0.0.ul. Powstancow Wielkopolskich 48PL-62-031 Lubon -Poznano

07. In the case of components and separatetechnical units, location and method ofaffixing of the EEC approval mark : on housing, data stamped

...P.O. Box 777

2700 AT Zoetermeer

The Nether1ands

Tel. + 3] (0)793458143Fax + 3] (0)79 345 8043www.rdw.n1

Vehicle Approval and Information

Couplings-component 94.20-94.20 v4.00 Page 2 013

Type-approval number: e4*94/20*94/20*0376*06

0.8. Name(s) and address(es) ofassemblyplant(s) : see information document (Annex III),

item 0.8

SECTION II

1. Additional information (whereapplicable) . see Appendix I

2. Technical servic.e responsible forcarrying out the tests . DEKRA Automobil GmbH

Automobil Test CenterSenftenberger StraBe30D-01998 Klettwitz

: 27-7-2007

. 9601009 Extension 06

. see Appendix I

9. The index to the information package lodged with the competent authority that has grantedtype-approval, which may be obtained on request, is attached:- Application form relating to Annex III and annexed drawings.- Drawings and instructions for attachment.- Fitting instructions.

(1) The EEC type-approval number appearing on this document shall consist of all sections outlined in Annex VII to Directive 701156/EEC,as last amended by Directive 92/53/EEC. The component itself shall be marked as prescribed in the relevant separate Directive.

(2) If the means of identification of type contains characters not relevant to describe the vehic1e, component or separate technical unit typescovered by this type-approval certificate such characters shall be represented in the documentation by the symbol: "?" (e.g.ABC??123??).

3. Date of test report

4. Number of test report

5. Remarks (ifany)

6. Place

7. Date

8. Signature

APPENDIX I

-

to EEC type-approval certificate number: e4*94/20*94/20*0376*06

Additional information

Class of the type of coupling

Categories or types ofvehicles forwhich the device is designed orrestricted

Maximum D-value (1)

Maximum verticalload S at thecouplingpoint (I)

Maximum load U at the fifth wheelcouplingpoint(I)

Maximum V -value (1)

Instructions for attachment of thecoupling type to the vehicle andphotographs or drawings of the fixingpoints at the vehicle given by themanufacturer; additional information ifthe use of the coupling type isrestricted to special types of vehicles

Information on the fitting of specialtowing brackets or mounting plates (1)

Remarks (2)

Couplings-component 94.20-94.20 v4.00

: B50-X

conceming the component type-approval of mechanical coupling devices with regard to Directive94/20/EC.

1.3.

1.4.

1.5.

1.6.

1.7.

1.8.

5.

: see instructions for attachment and use

: 7,2 kN

1.

1.1.

1.2.

: 75 kg

tonnes

kN

(m.-I' ~I~~ .. !d?~,-,

)- " .:,~;';~"-~RDW /

: see instructions for attachment and use

: not applicable

: The installation of the coupling device on thevehicle must be checked according to therequirements given in Annex VII (see Annex IParagraph 5.10.)

(1)Delete where not applicable.(2)Inc1uding information as to whether fifth wheel couplings are unsuitable for positive steering.

.,

Page3 oj 3