eZee Front Desk Next Gen - Property Management Software : Network Configuration

Page 0 of 2 Copyright © 2010 - eZee Technosys Pvt. Ltd. All rights reserved

Page 1 of 2

Net Configuration Setting eZee

Net configuration settings allow you to work with the

will require to make its respective settings.

Following are the steps you need to follow to set up the Net configuration of Client/Server Settings.

Please open eZee FrontDesk,

First of all Click on the icon on the top left corner of eZee F

From that drop down menu click on General Settings. On clicking another window gets displayed named “General

Settings”. In this window select Client/ Server, as shown below

eZee Front Desk Next Gen - Property Management Software

Copyright © 2010 - eZee Technosys Pvt. Ltd. All rights reserved

eZee FrontDesk NextGen

Net configuration settings allow you to work with the client/server architecture, So to work with the client machine, you

will require to make its respective settings.

Following are the steps you need to follow to set up the Net configuration of Client/Server Settings.

icon on the top left corner of eZee FrontDesk, this will show display a dropdown menu:

From that drop down menu click on General Settings. On clicking another window gets displayed named “General

t/ Server, as shown below �

Property Management Software : Network Configuration

eZee Technosys Pvt. Ltd. All rights reserved

client/server architecture, So to work with the client machine, you

Following are the steps you need to follow to set up the Net configuration of Client/Server Settings.

, this will show display a dropdown menu:-

From that drop down menu click on General Settings. On clicking another window gets displayed named “General

eZee Front Desk Next Gen - Property Management Software : Network Configuration

Page 2 of 2 Copyright © 2010 - eZee Technosys Pvt. Ltd. All rights reserved

Here you will find an option “Working Mode”. When you scroll down the combo box, this has 3 options viz. Stand alone,

Server and Client.

If you select Working Mode as “Stand alone”, it means you have only one machine, there is no other machine attached to

your server, then select Stand Alone. For this the settings are done by default, you need not to change any settings.

If you select Working Mode as “Server”, this means you are using this particular machine as a Server, which

might be connected to another client machines or may work as Stand Alone. This is also configured by default

you need not change any settings.

If you select Working Mode as “Client”, this means you are using this particular machine as a Client Machine, which will be

connected to a server and will work as per the server.

To make machine as a client machine you will need to follow the following steps �

1). Select working mode as “Client” from the drop down, in the Server field enter the IP address of the Server or the

name of the Server machine.

2). Set refresh Interval timings as per your requirements. Following are the images showing from where and how to

configure the Network.

Note: These settings are going to affect after restarting eZee FrontDesk.