Extrusion blow molding by Pet All Manufacturing Inc

Can Mold Budget Work Horse Series

This Can Mold is the ultimate quality/price package. A state of the art blow molder with inclined carriage movement of classic German design at extremely competitive prices.

Extrusion Blow Molding Program

Machine Range

Technical Description

• Totally reliable; several thousand sold • Automatic scrap/deflash removal• Most components available from stock • Best machine on the market for ROI• Economical tooling package• Tie-bar-less clamp• Angled carriage movement of classical design• US screw available on request for special requirement• Single or double - sided models available up to 12 l

http://www.petallmfg.com/extrusion-blow-molding-machines.html

Element Linear Bearing Machines

Machine Range

Leveraged Clamp Models

Designed with extra clamp force for large, difficult

containers Clamp cylinder is mounted underneath

carriage and activates the platens via levers

Element Large Linear Bearing Machines

The Element Large Linear Bearing series is comprised of 4

Machines

• 2 l capacity (CAN - EL Large 2D)




http://www.petallmfg.com/extrusion-blow-molding-machines.html


• Leveraged clamp design• Beckhoff PLC and 200 point programmer• Grooved extruder• Melt pressure sensor• Proportionally controlled mold movement• Parker, Rexroth, and Yuken hydraulics• Festo or SMC pneumatics• 15" color screen • Blow pins can be moved forward for mold change

http://www.petallmfg.com

Can Mold Heavy Duty Long Stroke Machines

• MULTIPROCESS CONTROL OPERATION PANEL• PARISON CONTROL SCREEN • ELECTRICAL PANEL• SINGLE HEAD WITH VIEW STRIPE EXTRUDER• QUADRUPLE HEAD WITH VIEW STRIPE EXTRUDER• SINGLE STATION MOLD CLAMPING UNIT• DOUBLE STATION MOLD CLAMPING UNIT• DOUBLE HEAD DOUBLE STATION MODEL• HYDRAULIC UNIT• IN LINE LEAK DETECTOR • BUILT IN TYPE LEAK DETECTOR


Machine Range Heavy Duty Series HD 70R,HD 150R, HD 250R

Multi - Layer Machinery

• All machinery form 1. to 4. can be supplied in multi - layer format up to 7 layers

• From small bottles up to 30 l jerry cans can be produced• Triple layer systems with calcium carbonate in the center layer

for material cost savings• 7 - layer systems with nylon or EVOH for barrier improvement


Machine Configurations

Available Technologies

Single Head 2 L 7 - Layer Machine

CONTACT USCANADIAN HEAD OFFICE:

Pet All Manufacturing Inc.85 Royal Crest Court, Markham, OntarioL3R 9X5, CANADATELEPHONE: 905-305-1797FAX: 905-305-0013E-MAIL: [email protected]

USA ENGINEERING CENTRE:

Pet All USA Inc.971 Division Street Adrian, Michigan49221, USATELEPHONE: 517-403-4740E-MAIL: [email protected]

WEBSITE: www.petallmfg.com

Extrusion blow molding by Pet All Manufacturing Inc

Technology

Transcript of Extrusion blow molding by Pet All Manufacturing Inc