Extension Arm - at-source

5
Extension Arm The Extension arm is designed to be used when extra reach is needed The Nederman extension arm for extraction arms is designed to be used when extra reach is needed. The extension or is manufactured from robust steel profiles. The extension can be connected direct to a single fan or to a ducted system. The extension arm is suspended by a pivoting wall bracket close to the wall and a joint on the middle of the product, which makes it flexible in all directions. The product is equipped with a universal bracket at the end which fits all Nederman extraction arms, exhaust reels or single exhaust extractors. The arm is equipped with a diameter 200mm (7,78") hose, for high airflows. Duct kits are orderered separatley from the list of accessories. It is possible to support other products to the extension arm such as welding machines, hose and cable reels ,etc. All arm parts are treated with Nederman blue colour, except for the metal ducts which are galvanized. Product name Extension Arm Installation [Indoor] Material Powder coated steel Extraction arm diameter (mm) 200 Airflow (m3/h) 600 - 2000 Colour Blue This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB www.nederman.com 1 20-08-2019

Transcript of Extension Arm - at-source

Page 1: Extension Arm - at-source

Extension ArmThe Extension arm is designed to be used when extra reach is needed

The Nederman extension arm for extraction arms is designed to beused when extra reach is needed. The extension or is manufacturedfrom robust steel profiles. The extension can be connected direct toa single fan or to a ducted system.

The extension arm is suspended by a pivoting wall bracket close tothe wall and a joint on the middle of the product, which makes itflexible in all directions. The product is equipped with a universalbracket at the end which fits all Nederman extraction arms, exhaustreels or single exhaust extractors. The arm is equipped with adiameter 200mm (7,78") hose, for high airflows. Duct kits areorderered separatley from the list of accessories.

It is possible to support other products to the extension arm such aswelding machines, hose and cable reels ,etc. All arm parts aretreated with Nederman blue colour, except for the metal ducts whichare galvanized.

Product name Extension ArmInstallation [Indoor]Material Powder coated steelExtraction arm diameter (mm) 200Airflow (m3/h) 600 - 2000Colour Blue

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 1 20-08-2019

Page 2: Extension Arm - at-source

*Maximum load on outer arm, 100 kg**Maximum load on outer arm, 60 kg. Max length of extraction arms 4 m for original and 3 m for NEX MD/HD

Extension Arm

[image] Description Arm length (m) Weight (kg) [model]

Extension arm 4,2m 4,2 73 10506635*

Extension arm 6m 6 93 10507735**

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 2 20-08-2019

Page 3: Extension Arm - at-source

*PVC hose and galvanised steel pipe**NR-CP hose and galvanised steel pipe***NFC2 hose and galvanised steel pipe****NFC3 hose and galvanised steel pipe

Extension Arm

[accessory] [partno]

Duct kit fume, ext. arm 6 m, Ø 200 mm 10374360*

Duct kit exhaust, ext arm 6 m, Ø 200 mm 10374374**

Duct kit exhaust, ext. arm 4,2 m, Ø 200 mm 10374375***

Duct kit fume, ext. arm 4,2 m, Ø 200 mm 10374376*

Duct kit exhaust, ext. arm 4,2 m, Ø 200 mm 10376440****

Duct kit exhaust, ext. arm 6 m, Ø 200 mm 10376441****

Arm bracket exhaust reel 20374358

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 3 20-08-2019

Page 4: Extension Arm - at-source

Extension Arm

X-axis: m³/h

Y-axis: Static Pa

A: Extension arm bent 40˚ (to its limit).

B: Extension arm bent 90˚.

C Extension arm is straight.

Recommended additional equipment

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 4 20-08-2019

Page 5: Extension Arm - at-source

Extension Arm

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 5 20-08-2019