exfo ftb 400

7/30/2019 exfo ftb 400

1/12

T h e u l tim a t e p la t fo r m fo r n e t w o r k e x p e r ts

Simultaneous acq uisitions and fast data po st-processing

Scalable range of test applications and field-interchangeable modules

Pentium-powered W indows op erating systemEasy-to-read, high-resolution 30.7 cm transflective (TFT) screen

C o m b i n in g p h y s i c a l, o p t ic a l, t ra n s p o r t a n dd a t a c o m t es t in g in a s in g l e b o x

Physical and optical testing: complete fiber and signal characterization

using OTDR, OLTS, PMD, CD and OSA test modules

Transport and datacom testing: QoS assurance validation using

SO NET/SD H and Ethernet test modules

U N IVER SAL TEST SYSTEM

elecom Test and Measurement

www.EXFO.com

FTB-400N E T W O R K T E S T I N G
http://www.exfo.com/

7/30/2019 exfo ftb 400

2/12

FTB - 4 0 0Universal Test system

www.EXFO.com

Th e U ltim ate P latfo rm fo r N etwo rk E xp erts

M u lt ip l e C o n f ig u r a tio n s , D o z e n s o f O p t io n sThe FTB-400 Universal Test System comes in five configurations to expand your

testing possibilities.

Bus-Protector ConfigurationUltra-slim bus p rotector for using the FTB-400 as a ded icated portablecomputer

Two-Slot Configuration

OTDR mod ule (wide selection of models) comb ined with an automated opticalloss test (OLTS) module, perfect for fiber characterization

Over 500 OTDR and loss testing combinations

Four-Slot ConfigurationThis c ompact, high-power, multipurpose back recep tacle houses up to four single

slot FTB test modules and offers a high-speed bus, ideal for various applications:

Extensive datacom testing, using the complete Packet Blazer line of modulesFibre C hannel, Gigabit Ethernet and 10 G igabit Ethernet

Multiservice transport testing using Transport Blazer modules in conjunctionwith the Packet Blazer modules

Dedicated O TDR, loss and Ethernet (up to 1 0 G igabit) testing, combiningan OTDR, the MultiTest module (OLTS) and a Packet Blazer module

Seven-Slot Configuration

Extensible b asic and advanced fiber-optic test app lications, including DW DMand dispersion analysis

O ver 100 0 testing c ombinationschromatic dipersion (CD), polarization modedispersion (PMD) and optical spectrum analyzer (O SA) mod ules, ribbo n testkits, switches for high-fiber-count testing, OTDR and loss testing

Eight-Slot ConfigurationThis multipurpose, high-power, eight-slot back receptacle houses any of EXFOsFTB test modules and delivers first-class features:

Co mplete d ispersion characterizationC D, PM D and O TDRin a single p latform

Full compatib ility with t he Ethernet, Fibre C hannel, next-generationSONET/SDH and DSn/PDH test modules

High-speed bus

Integrated power supply (no external converter)

Technologically speaking, today's networks are more complex than ever. Thousands of components have to work in harmony, and

deployment specialists are responsible for tuning entire systems for optimal network performance and ensuring that records are up todate. At the same time, fiber counts are skyrocketing, and dense w avelength-division multiplexing (DW DM ) is entrenched in long-hauapplications, moving into metro.

New architectures. New deliverables. New do cumentation needs. A brand-new paradigm. Now, how do you rise to the challenge?

With the tough and proven FTB-400 Universal Test System from EXFO. This revolutionary test platform streamlines field-based test and

measurement operations onto a single powerful platform. Welcome to multitasking in the field.

7/30/2019 exfo ftb 400

3/12


www.EXFO.

C h o ic e o n th e M o v eChoose from a wide variety of high-performance test modules. Modules are swapped easily, which means you get to customize your test

set and configure your field equipment to meet evolving needs. Perform the right tests. Get the right data. And end up with integrated testreports for a global overview of your network's performance.

M o d u le C h o i c e s

O ver 25 O TDR models co vering all network testing applications, from co re to access

O ver 11 O LTS models for testing optical return loss (O RL) and insertion loss (IL)

CD analyzer

PMD analyzer

O S A s

SO NET/SD H analyzers (up to 10 Gb it/s)

Next-generation SO NET/SD H analyzers

DSn/PDH analyzers

Ethernet analyzers (up to 10 Gb it/s)

Fibre C hannel analyzers

Sw itch module: faster automated acquisitions b y switching betweenone commo n port and multiple input/output ports

Modular printer for field use

Mod ular pulse-suppressor boxes (singlemode and multimode)

Test with S p eed an d E ffic ien c y

The FTB-400 with print function and external printer.

7/30/2019 exfo ftb 400

4/12


www.EXFO.com

The A ll-in -On e S o lu tio n

If you're looking for high efficiency, the FTB-400 Universal Test System is the answer. Benefit from advanced test operations in outside-

plant installation, maintenance and troubleshooting.

Mu l t i t a sk i n gEvolve with the latest technologies. From pow er readings and OTDR testing to optical switching, CD and PM D analysis, DW DM testing

proto co l, datac om and d ata post -proces singthe FTB-40 0 U niversal Test System d oes it all. Mo re importantly, the FTB lineof swapp able test modules co ntinues to expand w ith new test app lications and acc elerated test routines.

The powerful FTB-40 0 can p erform simultaneous acq uisitions and data p ost-processing.

The main interface of ToolBox, the FTB-400s

standard software.

Data acqu isi ti on th rough OSA appl icat ion. Post -p rocessing OTDR f il es w ith opt ional

FastReporter software.

R u g g e dThe FTB-400 Universal Test System complies with GR-19 6-C O RE drop-test

standards (76 cm drops on all six sides and eight corners). Plus, the toughshell and rubber bumpers mean that the FTB-400 and its precision modulessurvive splashes, knocks and temperature extremes.

Use r - F r i e n d l y

30.7 cm transflective (TFT) color touchscreen

Easy to view, even in direct sunlight

Largest LC D sc reen on the market

80 0 x 60 0 p ixel resolution

The FTB-400s rugged components include a tough, efficienttouchscreen interface.

7/30/2019 exfo ftb 400

5/12


www.EXFO.

P o w e r f u lPower management is a snap, thanks to the ToolBox software. EXFOs FTB-400is based on the W indows 20 00 operating system, run by a Pentium-seriesprocessor with up 51 2 M B of SDRAM.

Fast, intuitive Sleep mode for power conservation

Far-ranging operating time

Automated power management

R a p i dGet moving faster, get results faster. New-generation processing power meansacquisitions and data analysis are quicker than ever. And enjoy the advantageof EXFO's exclusive online data post-processing.

Quick, easy data transfer

Extremely fast acq uisitions

Efficient data post-processing

Two U SB ports

Infrared (IrDA) po rt

PCM C IA type I II

W ritable C D-ROM

S c a l a b l eChoose between basic and advanced test ing.The two-slot conf igurat ion enables compact,dedicated loss, ORL, OTDR and Gigabit Ethernet

testing. The fully equipped eight-slot configurationprovides space for optical switching in high-fiber-count

appl icat ions, dispersion analysis, DW DM test ing,as wel l as transport and datacom test ing.Configurations are interchangeable.

M o d u l a rChoose your range of test applications. The FTB-400 Universal Test Systemcom bines a series of high-performance test mod ules in a pow erful platform. The test

set simultaneously runs up to eight single-slot field-interchangeable modules.

Two-slot FTB-400.

Plug in your choice of test modules.

Four-slot FTB-400 . Seven-slot FTB-400 . Eight-slot FTB-400 .

Real-time battery information w indow.

Quick, easy and effective data transfer.

7/30/2019 exfo ftb 400

6/12

* Note: The FTB-400 is compatible with currently available FTB test modules. Please call to verify compatibility with legacy products no longer being manufactured.


www.EXFO.com

H o u sin g a Co m p lete R an ge* o f Test So lu tio n sFTB-7000 OTDR Series

EXFOs OTDR modules offer numeroussinglemode and multimode configurations

available at several wavelengths. TheFTB-7000 family includes five lines ofOTDRs: the FTB-7200 LAN/W AN OTDR,

the FTB-7200/7300 FTTx Access/MetroOTDR, the FTB-7400 Metro/Long-Haul

OTDR, the FTB-7500 Long-Haul OTDRand the FTB-76 00 Ultra-Long-Haul OTDR.

These mod ules offer first-class resolutionevent dead zone down to 0.8 m, andattenuation dead zone down to 3 m.

FTB-9100 Optical Switch

Multiply your measurement power with theFTB-9100 Optical Switch. Obtain fast,

repeatable measurements between onecommon port and multiple input/outputports. Automate d ata acquisition sessions

with specialized programmable functions.Choose between singlemode and

mult imode 1x12 switches; severalconnector types are available. Designed

for use with the FTB-7000 series OTDRs.

FTB-3930 MultiTest M odule

MultiTest modules are customizable losstesters perfec t for estimating loss

budgets. Integrate your choice of powermeter and light source, exclusive FasTesTautomated loss test set, ORL tester, visual

fault locator (VFL), and digital talk set.New features include: FTTx-mode display

(1490/1550 nm downstream, 1310 nmupstream), remote referencing and saving,

as well as new measurement distanceunits (feet and kilofeet).

FTB-5240B, FTB-5240 and FTB-5230

Optical Spectrum AnalyzersEXFOs O SAs deliver lab-quality specs in

rugged, field-testing modules d esigned fortoday s advanced networksDW DM ,C W D M , e t c . They enab l e you t o

accurately monitor opt ical wavelengthchannels within a fiber, offering a high

optical rejection ratio (ORR), top-of-the-l ine wavelength accuracy and wide

spectral range. They now include a keysoftware funct ion for ROADM test ing,enabling you to thoroughly address in-

band O SN R measurement.

FTB-5500B Polarization Mode

Dispersion AnalyzerFor testing PMD in crucial high-speed

fiber l inks, the FTB-5500B PMD Analyzeris the solution. Dynamic range reaches50 dB. P lus, get second-order PMD

calculations and benefit from the wideanalysis range (0 to 1 15 ps).

FTB-5800 Chromatic

Dispersion AnalyzerUsing the proven phase-shif t method

t h i s pa t en t - pend i ng des i gn a l l ow smeasurement of CD with high speed andhigh accuracy. Up to 950 test points can

be acquired for improved and unmatchedaccuracy. In addition, test through devices

such as erbium-doped fiber amplifiers(EDFAs), for testing of entire links, not

mere sections. Our unique d esign requiresonly one fiber for testing: no need for asecond fiber dedicated to co mmunication

7/30/2019 exfo ftb 400

7/12


www.EXFO.

FTB-8105 Transport Blazer

DSn/ PDH and SONET/ SDHElectrical Test Module

The FTB-8105 is ideally suited for TDMfield service deployment and maintenance

activities. This test module offerscapabilit ies to test traditional TDM DSnand PDH electrical rates, as well as the

SONET and SDH electrical rates of up to155 Mbi t/s.

FTB-8120NGE/ 8130NGE Power Blazer

Next-Gen Multiservice Test Modules

These modules offer a full suite of SO NET/SD H,

next-gen SONET/SDH and Ethernet testingcapabilities inside the industrys most compact

form factor, meeting all multiservice transportnetwork testing needs. The FTB-8130NGE,supporting testing rates up to 10 Gbit/s for both

SONET/SDH and Ethernet (including10 G igabit Ethernet LAN/ W AN), is ideally suited

for MSTP and ROADM network deploymentsas well as maintenance activities. The

FTB-8120NGE, handling SONET/SDH testingrates up to 2.5 Gbit/s and Ethernet testing ratesup to GigE, is purpose-built for the growing

deployments of Ethernet-over-TDM andEthernet-over-SONET/SDH services worldwide.

FTB-8510B/ 8510G Packet Blazer

Ethernet/ 10 Gigabit Ethernet TestModules

These modules offer performance validationfor carrier-grade Ethernet-based services.

Their wide range of test functionalitiesprovides all the necessary measurementtools for service-level agreements (SLAs)

validation. The FTB-85 10 B tests connectivityin its native format: 10/100/1000Base-T,

100Base-FX, 100Base-LX, 1000Base-SX,100 0B ase-LX and 100 0B ase-ZX, and the

FTB-8510G is used to test next-generationSONET/SDH, hybrid multiplexers, darkfiber or xW DM netw orks running 10 G igabit

Ethernet interfaces.

FTB-8115 Transport Blazer

SONET/ SDH Test ModuleAvailable in 155 Mbit/s (OC-3/STM-1),

622 Mbit /s (OC -12/STM-4) and 2.5 Gbit /s(OC-48/STM-16) conf i gura t i ons , t he

FTB-8115 test module combines advancedDSn/PDH and SONET/SDH interfaces

and functions in a single unit, ideal foraccess and metro SONET/SDH networkcommissioning and troubleshooting.

FTB-8120/ 8130 Transport Blazer

Next-Gen SONET/ SDH Test ModulesThe FTB-81 20 (2 .5 Gbit/s) and FTB-813 0

(10/10.7 Gbit /s) test modules combineadvanced D S n / P D H , S O N E T / S D H ,

next-generation SONET/SDH and opticaltransport netw ork (OTN) test functions in a

single uni t , el iminat ing the need formul t ip le purpose-bui l t test plat formswhen commissioning or troubleshooting

multiservice SONET/SDH networks.

FTB-8520 Packet Blazer SAN Fibre

Channel Test ModuleThe FTB-8520 brings FC-0, FC-1 and

FC-2 logical layer Fibre Channel testing toservices delivered via transport protocols,

such as DW DM, SO NET/SDH and dark fiber.It provides valuable timing information and

buffer credit estimation for Fibre Channelnetwork deployment. This module is designedfor testing both telecom and Fibre Channel

services, enabling end-to-end latency testing.Whats more, the FTB-8520 helps ensure

long-term integrity and error-free data deliveryacross Fibre Channel links.

7/30/2019 exfo ftb 400

8/12


www.EXFO.com

Wide-Open Test Applications

Proce ssing po wer, speed and flexibilityall great features. Whats even b etter? Amazing ben efits. W hile acquiring OTD R data on one se

of fibers, you can p erform DW DM testing w ith an O SA on other fibers in the cable. Then, print out c oncise reports on both tests. Today

this is simply the best way to streamline test and measurement operations. You'll work more effectively, speed up your test procedures inthe field and save hours in the process.

Youre responsible for install ing no n-zero dispersion-shifted fiber (NZD SF), qualifying DW DM SO NET/SD H transmission eq uipmentmaintaining fiber networks and qualifying each and every splice in long-haul data networks. What you need is the FTB-400. Insert anycombination of OSA, PMD analyzer, OTDR, power meter, ribbon fiber test kit or high-density optical switch in the two-slot or seven-slo

FTB-400 UTS and perform all your tests simultaneously.

App ly the same conc epts to new acces s networks as well as passive optical netwo rks (PON s). Though transmission rates are cons iderablylower compared to long-haul systems (OC -3/12 vs. O C-19 2/7 68 ; STM 1/ 4 vs. STM 6 4/2 56 ), the density and architecture of the networks

(point-to-multipoint instead of p oint-to-point) vary enormously. The FTB-40 0 offers solutions adapted to all possible app lications.

Mu l t i t a sk i n gWhat does multitasking mean? Its the revolutionary ability to simultaneously

combine several applications to meet specific test and measurement needs. Thanksto four mod ule receptacle choices (2 , 4, 7 or 8 slots) and multiple configurations, theFTB-40 0 brings multitasking to new heights. Below are a few examples.

Link characterization (eight slots):First-class dispersion testing.

FTB-5240B Optical Spectrum Analyzer

FTB-5500B PMD Analyzer

FTB-58 00 Chromatic Dispersion Analyzer

FTB-700 0B /FTB-700 0D OTDR

Provisioning and turning up DWDM services (four slots):

Simultaneous bit-error-rate (BER) testing on multiple interfaces.FTB-8105 Transport Blazer DSn/PDH and SONET/SDH Electrical Test Module

FTB-811 5/8 120 /81 30 Transport Blazer SO NET/SD H Test Modules

FTB-8120NGE/8130NGE Power Blazer Next-Generation MultiserviceTest Modules

FTB-85 10 B Packet Blazer Ethernet Test M odule

FTB-85 10 G Packet Blazer 10 G igabit Ethernet Test Module

FTB-85 20 Packet Blazer SAN Fibre C hannel Test Mod ule

Installation and maintenance (two slots):OTDR and ORL testing on PON fiber links.

FTB-7200D-236B OTDR

FTB-3930 MultiTest Module

Installation and maintenance for high-fiber-count applications (seven slots)OTDR and ORL testing on long-haul and metro fiber links in a high-fiber-

count environment.

FTB-39 30 MultiTest Mod ule

FTB-7300D-234B OTDR

FTB-910 0 Op tical Switch

GP-273 Printer Module

7/30/2019 exfo ftb 400

9/12


www.EXFO.

Data Po st-P roc essing: Field an d Desk top E ffic ienc y

ToolBox: Standard Software for the Field and Desktop

The FTB-400 Universal Test System comes with ToolBox software, which supports a wide range of EXFO field-testing modules: OTDR,

MultiTest (OLTS), optical switch, OSA, PMD analyzer and chromatic dispersion (CD) analyzer, as well as SONET/SDH, Ethernet andFibre Channel test mod ules. ToolB ox also come s with Pow er Meter Result Viewer, B atch Proc essor Light and d ata transfer functionalities.

F a s t -Tr a c k D a t a P o s t -P r o c e s s in g w i th F a s t R e p o r t e r S o ft w a r e

The optional FastReporter software package provides you with the post-processing tools and functionalities you need to achieve

flexible, fully integrated data analysis, whatever the app lication. Designed for off-line analysis of field-acquired data , FastRepo rteroffers a truly intuitive graphical user interface, which contributes to boosting productivity.

P o w e r fu l B a t c h P r o c e s s in gAutomate repetitive operations on large numbers of OTDR test files, andoptimize your productivity. Document an entire cable in a matter of

seconds. Adjust your cable parameters and detection thresholds andperform batch analysis. Open OTDR fi les from various vendors

equipment and convert them to the universal Telcordia format.

B id i re c t io n a l B a t c h A n a ly s i sAnalyze an entire cable in just two steps. View data for all events on allfibers, and at each wavelength, on a single screen.

L ive Te m p l a t in g fo r O TD R Te s t in gBenefit from one-step file management at any wavelength. Keep full

control by adding or removing events manually, or add/remove eventsautomatically using a reference. Get uniform, detailed cable reports.

F l e x i b l e Re p o r t i n gChoo se from various report templates, including loss and O RL, OTDR,PMD, CD and fiber characterization. Generate comprehensive cable

reports in PDF, Excel or HTML format.

Bidirectionnal b atch analysis.

7/30/2019 exfo ftb 400

10/12


www.EXFO.com

Mu ltim ed ia Ad vantages

Pentium-series processor. Essential for speedand multitasking operations.

PC MC IA type III device (two-slot) supports.

Flash memory cards (256 MB to 1024 MB) (optional).

Ethernet/Fast Ethernet (10/100 Mbit/s) network card forremote control from a PC or another FTB-400 (optional).

Fax modem (56 .6 kbit/s) (optional).

Up to 512 MB SDRAM. Quick access to internal memory.

IrDA port and tw o US B 1 .1 ports. Speed up d ata transfer.

Internal 3.5-inch 1.44 M B floppy drive.

Serial and parallel port. Printer and other peripherals.30 .7 cm c olor touchscreen resists spil ls and splashes.High-resolution, especially under bright light conditions.

Dial. Quick-select software functions.

External monitor port.

Microphone port. Built-in or external.

Sound card and speaker. Audible alarms.

Lightweight casing. Splashproof protection of op ticaland electronic components.

EXFO headset interface.

30 .7 cm color screen

Speaker Activity LEDs Dial

Built-in microphone

Protectivebumpers

Lightweight

casing Two-slot modulereceptacle

Mic-In and

Speaker-Out ports

Serial port DE-9

Parallel port DB-25

Video port DE-15

Two US B ports

AC/D C power port

3.5-inch floppy

PCMCIA type III

IR port

Two-slot module

receptacle

7/30/2019 exfo ftb 400

11/12


www.EXFO.

SPECIF ICATIONS a

Display Touchscreen, color, 8 00 x 6 0 0 TFT 3 07 mm (12 1/16 in)

Interfaces Serial RS-23 2

Parallel port

External monitor

Two USB 1.1 ports

Infrared (IrDA) port

Audio microphone In 3.5 mm

Audio speaker Out 3 .5 mm

Two PCMCIA type II or one PCAMCIA type III

Storage Internal 8 0 G B hard drive minimum (over 7 50 00 0 O TD R test files)

Internal 3.5 in 1.44 MB floppy drive

External USB read/write CD-RO M (optional)

Flash memory cards (256 , 512, 10 24 MB ) (optional)

NTFS file system

Batteries b Rechargeable NiMH battery pack (two batteries for two-slot receptacle, two for four-slot receptacle, four for seven-slot receptacle,

two for eight-slot receptacle) > 8 h of continuous operation as per Bellcore TR-NW T-0011 38

P owe r sup p ly 1 0 0 2 4 0 VA C, 5 0 /6 0 Hz an d 1 2 2 4 V DC fo r the two-s lo t (GP -4 0 2 ) an d th e seve n-s lo t (GP -4 0 7 ) mod ule re cep tac le s; 1 0 0 24 0 V AC,

50 /60 Hz and 24 VDC for the four-slot (G P-404) module receptacle; and 100 -240 VAC, 50 /6 0 Hz for the eight-slot

(G P-408) module receptacle

GE N E RA L S P E CI F ICA TION S

A C C E S S O R I E S

G P-273 Internal printer module

GP-28 5 Spare NiMH smart battery for FTB-400

G P-287 External battery charger for smart battery

(A-E-I-S-U) for FTB-100B and FTB-400

(requires AC external adapter/charger). Specify :

A-North America, E-Europe, I-India, S-Australia and

New-Zealand, U-United-Kingdom

GP-297 (A-E-I-S-U) Canon BJC-85 (external printerstandard on the FTB-300 also)

G P-29 8 PC MC IA Fast Ethernet LAN (10/100 M B auto-detect)

G P-299 PC MC IA PSTN 56.6 kb/s

G P-302 USB mouse

G P-303 PC MC IA G PIB interfaceG P -3 0 4 (A -E-I-S -U ) W rit ab le C D-R O M

G P -3 0 5 ( A-E-I-S -U ) S p ar e p ow er ad ap te r

G P-307 EXFO headset + adapter (allows connection

of EXFO headset to microphone and speaker port)

G P-308 C ar lighter booster

G P-309 DC adapter for lighter plug

G P-310 Headset adapter

G P-320 256 MB ATA flash card for FTB-100B or FTB-400

(8000 traces typ.)


(16 0 00 traces typ.)


(32 00 0 traces typ.)

G P-402 Additional two-slot receptacle

G P-404 Additional four-slot receptacle

G P-407 Additional seven-slot receptacle

G P-408 Additional eight-slot receptacle

G P-1003 B attery compartment door for FTB-400

G P-2000 PC bus protector

G P-2001 USB keyboard

G P-2002 USB memory stick 256 M B

G P-2003 USB memory stick 512 M B

G P-2005 Tw in battery pack conditioning charger(A-E-I-S-U) for FTB-100 and FTB-400

G P-2 026 S pare pow er adapter for G P-4 04 module receptacle

Carrying cases

G P-10-0 47 Soft case for mainframe + tw o-slot

G P-1 0-0 47 B S emi-rig id c ase for tw o/ four-slot FTB -4 00

(without FTB-8000 series)

G P -1 0-0 56 B S oft case fo r mainframe + seven-slo t w it h w heels

and carrying handle

G P-10-057 Universal hard case FTB-400

G P -1 0-0 6 8 R ig id c as e fo r t wo /fo ur-s lot FTB -4 00 ( wit hout FTB -8 00 0 series )

Notes

a. All specifications valid at 23 C (73 F).b. Standard recharge time is 5 hrs. Recharge

temp erature: 0 C to 35 C (32 F to 95 F).Not applicable for the G P 40 8 eight-slotmodule receptacle.

c. Not including internal batteries. Batterymaximum storage temperature 40 C (104 F).

d. Platform with batteries, no modules included.

e. Two-slot recep tacle.

Temperature c

operating 0 C to 50 C (32 F to 122 F)

st orag e 4 0 C t o 6 0 C ( 4 0 F t o 1 4 0F)

R elat ive humid it y 0 % to 95 % (no n-c ond ens ing )

S ize (H x W x D ) Main fr ame + two -s lo t mod ul e r ece ptac le : 3 1 8 mm x 3 4 3 mm x 1 1 4 mm

(1 2 1/2 in x 13 1/2 in x 4 1/2 in)

Mainframe + four-slot module receptacle: 318 mm x 34 3 mm x 13 9 mm

(1 2 1/2 in x 13 1/2 in x 5 1/2 in)

Mainframe + seven-slot module receptacle: 318 mm x 343 mm x 197 mm

(1 2 1/2 in x 13 1/2 in x 7 3/4 in)

Mainframe + eight-slot module receptacle: 318 mm x 343 mm x 246 mm

(1 2 1/2 in x 13 1/2 in x 9 11/16 in)

Weight d Mainframe + two-slot module receptacle, including two N iMH batteries: 7.5 kg (16.6 lb)

Mainframe + four-slot module receptacle, including two NiMH batteries: 8.3 kg (18.2 lb)

Mainframe + seven-slot module recept acle, including four NiMH batteries: 9.8 kg (21.6 lb)

Mainframe + eight-slot module receptacle, including two NiM H batteries: 11.1 kg (24.5 lb)

Vibration < 1.5 g. at 10 H z to 5 00 Hz (on three main axes)

Mechanical shock e < 760 mm on six sides and eight main edges (according to GR-196 -CO RE)Isolation Spillproof and splashproof

C E compliance C lass A certification

7/30/2019 exfo ftb 400

12/12

SPFTB-400 .12AN 2008 EXFO Electro-Optical Engineering Inc. All rights reserved. Printed in Canada 08/ 01

EXFO Corporate Headquarters > 4 00 Godin Avenue, Quebec City (Quebec) G1M 2K2 CANADA Tel.: 1 418 683-0211 Fax: 1 418 683-2170 [email protected]: 1 800 663-3936 (USA and Canada) www.EXFO.com

EXFO is certified ISO 9001 and attests to the qualit y of t hese products. This device complies with Part 15 of the FCC Rules. Operation is subject to t he follow ing tw o conditi ons: (1) this device may not cause harmful in terference, and (2) this device must accept any in terferenc

received, including in terference that may cause undesired operation. EXFO has made every eff ort to ensure t hat the in format ion con tained in this specification sheet is accurate. However, we accept no responsibility for any errors or omissions, and we reserve the right to modify

design, characteristics and products at any time without obligation. Units of measurement in this document conform to SI standards and practices. In addition, all of EXFOs manufactured products are compliant with the European Unions WEEE directive. For more information, please

visit www.EXFO.com/recycle . Contact EXFO for prices and availability or to obtain the phone number of your local EXFO distributor.

For the most recent version of this spec sheet, please go to the EXFO website at http://www.EXFO.com/specs

In case of discrepancy, the Web version takes precedence over any printed literature.

EXFO America 3701 Plano Parkway, Suite 160 Plano, TX 75075 USA Tel.: 1 800 663-3936 Fax: 1 972 836-0164

EXFO Europe Omega Enterprise Park, Electron Way Chandlers Ford, Hampshire S053 4SE ENG LAND Tel.: + 44 2380 246810 Fax: + 44 2380 246801

EXFO Asia 151 Chin Swee Road, # 03-29 Manhattan House SINGAPO RE 169876 Tel.: + 65 6333 8241 Fax: + 65 6333 8242

EXFO China No. 88 Fuhua, First Road, Central Tower, Room 801 Shenzhen 518048 P. R. C H INA Tel.: + 86 (755) 8203 2300 Fax: + 86 (755) 8203 2306

Futian District

Beijing New Century Hotel Office Tower, Room 1754-1755 Beijing 100044 P. R. CH INA Tel.: + 86 (10) 6849 2738 Fax: + 86 (10) 6849 2662

No. 6 Southern C apital Gym Road


O R D E R I N G I N FO R M AT IO N

NOTES

1. Similar specifications apply to the IQS-8510 Packet Blazer module,designed for the IQS-500 platform.

2. Upgrade kit also available for FTB-8510 Packet Blazer, providing oneor two Gigabit Ethernet ports.

ModelFTB-40 0 = Modular main frame unit

DisplayD4 = TFT active color touchscreen

MemoryN8 = Standard 128 MBN10 = Additional 128 MB (total of 256 MB)N12 = Additional 384 MB (total of 512 MB)

Operating system language a

A = EnglishC = Chinese (simplified)E = SpanishF = FrenchG = GermanI = ItalianR = Russian b

X = Czech b

K = Korean b

J = Japanese b

V = Chinese (traditional)

Receptacle00 = Two-slot receptacle (GP-402)AV = Four-slot receptacle (G P-404 )

H = Seven-slot receptacle (G P-407)MP = Eight-slot receptacle (GP-408 )B P = Bus protector (GP-2000)

Notes

a. Software test applications might not support all languages listed above.

Call factory for information on supported software languages.

b. Call EXFO for details.

Example: FTB-400-N10-D4-H-A

FTB-4 0 0 -D X -N X -X X -X
http://www.exfo.com/

exfo ftb 400

Documents

Transcript of exfo ftb 400