EXEET FAMILY SKYLITE SERIESsite.cresteast.com.my/clients/cresteastcom/Downloads/S... · 2015. 8....
Transcript of EXEET FAMILY SKYLITE SERIESsite.cresteast.com.my/clients/cresteastcom/Downloads/S... · 2015. 8....
EXEET® FAMILY
SKYLITE® SERIES POLYCARBONATE & PMMA SHEET, FILM
2015 Sales Catalog
EXEET is the new brand which integrated various
product brand such as
“Hitech-Glas, Hi-Glas, Fine-PC, Fine-Glas and etc”
SKYLITE is the brand which integrated various
structure type of multiwall sheet.
EXEET® PC – POLYCARBONATE NORMAL GRADE SHEET
S Polytech sheet helps to meet tough challenges facing architects and builders to avoid the high maintenance or
replacement costs for glazing. Many architects and builders select it to get help by minimizes maintenance cost. It is
available in clear and white standard products and a wide range of color and designs. Exeet® PC is the brand
name of extruded Polycarbonate solid sheets manufactured by S Polytech which offers solutions to both indoor and
outdoor applications. S Polytech sheets are produced and tested according to ISO 9001.
EXEET® PC – HG
HG is model name of polish/polish type of Polycarbonate sheet.
EXEET® PC – HE
HE is model name of polish/emboss type of Polycarbonate sheet.
TYPICAL APPLICATIONS FEATURES & BENEFITS
• Soundproofing wall • Excellent light transmittance
• Construction material • Impact resistance
• Roof material • Heat resistance
• Connected route • Self-extinguishing (UL94 V0, V2 flame ratings)
• Superior printability
• Stability and Formability
EXEET® PC STANDARD SPEC
Classification Model Color Specification
Solid Sheet, Roll
HG00 Clear
• Thickness 2.0mm - 15.0mm
• Width 1,000mm - 2,100mm
• Length Order made
HG10 BLUE GREEN
HG11 LIGHT GREEN
HG13 DARK GREEN
HG17 DARK BLUE
HG21 LIGHT SKY BLUE
HG30 WHITE
HG40 BROWN
HG44 LIGHT BLUE SMOG
HG70 YELLOW
HE00 CLEAR
HE11 LIGHT GREEN
HE13 DARK GREEN
• RE-CLING ULTRA WHITE PE FILM MASKING STANDARD • LIGHT TRANSMISSION CONTROL AVAILABLE IN REQUEST
• UL V-0 AND V-2 GRADE AVAILABLE ON REQUEST • CUSTOM COLOR AVAILABLE ON REQUEST
• FDA GRADE AVAILABLE ON REQUEST • REEL PRODUCTS ON REQUEST
• ONE OR BOTH SIDE U.V COATING AVAILABLE ON REQUEST
• SPECIAL THICKNESS, DIMENSION AND PATTERNS CAN BE PROVIDED TO SPECIAL ORDER, SUBJECT TO SPECIAL CONDITIONS.
EXEET® FINE GLAS TECHNICAL DATA
Properties Test
Method
English
Units Value
SI
Units Value
Physical Properties
Specific Gravity ASTM D792 - 1.20 - 1.20
Water Absorption 23°C, 24 hr. ASTM D570 % 0.20 % 0.20
Refractive Index ASTM D542 - 1.59 - 1.59
Optical Properties
Transmittance ASTM D1003 % 86 % 86
Yellowness ASTM D1003 YI 2.0 YI 2.0
Haze ASTM D1003 % 1.0 % 1.0
Mechanical Properties
Tensile Strength ASTM D638 psi 65.0 Mpa 9500
Flexural Strength ASTM D790 psi 96.0 Mpa 14000
Flexural Modules ASTM D790 psi 2289 Mpa 332000
Elongation ASTM D638 % 100 % 100
Izod Impact Strength (@3mm) ASTM D256 J/m 854.4(P) ft-lbs/in 16.0(P)
Rockwell Hardness ASTM D785 R Scale 115 R Scale 115
Thermal Properties
Load-deformation Temperature ASTM D648 135
275
140 284
Coefficient of thermal expansion ASTM D696 // 6.0x10e-5 in/in/ 3.75x10e-5
Flammability UL 94 - V0, V2 - V0, V2
* The above information is typical values only, not for warranty purpose.
CHARATERISTICS
• Weather ability
• Brilliant surface
• Good UV resistant
• High temperature and sound insulation
• Easy to install using ordinary tools
• Excellent transparency
• Remain color constantly for yours
• Excellent molding performance
• High impact resistance
• Temperature resistant: between -40 °c +130°c
EXEET® NAEHOO SHEET – PC NAEHOO SHEET
Normal polycarbonate sheet turns yellow when exposed to sunlight for long years. NAEHOO sheet is specially
developed by S Polytech to improve discoloration. NAEHOO sheet has a co-extruded UV-resistance surface
treatment. This special method of S Polytech prevents yellowing and retain vivid color of products.
EXEET® NAEHOO – HGU / HEU
HGU is model name for the high weather-resistant which blocks sheet yellowing by special treatment for blocking
UV and HGU guarantee clean surface and long lasting clearness. HGU is polish/polish type. Polish/emboss type is
also exist called HEU.
TYPICAL APPLICATIONS FEATURES & BENEFITS
• Transparent soundproofing wall • Excellent UV protection
• Exterior construction material • Excellent yellowing resistance
• Roof material • Excellent durability
• Connecting walkway • Excellent Self-extinguishing (flame-resistance)
• Canopy • Excellent sound insulation, ideal for soundproof facilities
• Excellent heat and weather resistance
EXEET® NAEHOO SHEET STANDARD SPEC
Classification Model Color Specification
Solid Sheet, Roll
HGU00 CLEAR
• Thickness 2.0mm - 15.0mm
• Width 1,000mm - 2,100mm
• Length Order made
HGU10 BLUE GREEN
HGU11 LIGHT GREEN
HGU13 DARK GREEN
HGU17 DARK BLUE
HGU21 LIGHT SKY BLUE
HGU30 WHITE
HGU40 BROWN
HGU44 LIGHT BLUE SMOG
HGU70 YELLOW
HEU00 CLEAR
HEU11 LIGHT GREEN
HEU13 DARK GREEN
• RE-CLING ULTRA WHITE PE FILM MASKING STANDARD • LIGHT TRANSMISSION CONTROL AVAILABLE IN REQUEST
• UL V-0 AND V-2 GRADE AVAILABLE ON REQUEST • CUSTOM COLOR AVAILABLE ON REQUEST
• FDA GRADE AVAILABLE ON REQUEST • REEL PRODUCTS ON REQUEST
• SPECIAL THICKNESS, DIMENSION AND PATTERNS CAN BE PROVIDED TO SPECIAL ORDER, SUBJECT TO SPECIAL CONDITIONS.
EXEET® NAEHOO SHEET PRINCIPLE
EXEET® FINE GLAS TECHNICAL DATA
Properties Test
Method
English
Units Value
SI
Units Value
Physical Properties
Specific Gravity ASTM D792 - 1.20 - 1.20
Water Absorption 23°C, 24 hr. ASTM D570 % 0.20 % 0.20
Refractive Index ASTM D542 - 1.59 - 1.59
Optical Properties
Transmittance ASTM D1003 % 86 % 86
Yellowness ASTM D1003 YI 2.0 YI 2.0
Haze ASTM D1003 % 1.0 % 1.0
Mechanical Properties
Tensile Strength ASTM D638 psi 65.0 Mpa 9500
Flexural Strength ASTM D790 psi 96.0 Mpa 14000
Flexural Modules ASTM D790 psi 2289 Mpa 332000
Elongation ASTM D638 % 100 % 100
Izod Impact Strength (@3mm) ASTM D256 J/m 854.4(P) ft-lbs/in 16.0(P)
Rockwell Hardness ASTM D785 R Scale 115 R Scale 115
Thermal Properties
Load-deformation Temperature ASTM D648 135
275
140 284
Coefficient of thermal expansion ASTM D696 // 6.0x10e-5 in/in/ 3.75x10e-5
Flammability UL 94 - V0, V2 - V0, V2
* The above information is typical values only, not for warranty purpose.
EXEET® HEATCUT – PC HEATCUT SHEET
S Polytech sheet helps to meet tough challenges facing architects and builders to avoid the high maintenance or
replacement costs for glazing. Many architects and builders select it to get help by minimizes maintenance cost. It is
available in clear and white standard products and a wide range of color and designs. Exeet® PC is the brand
name of extruded Polycarbonate solid sheets manufactured by S Polytech which offers solutions to both indoor and
outdoor applications. S Polytech sheets are produced and tested according to ISO 9001.
EXEET® HEATCUT - HGH / HGHC
HGH is model name of heat shield sheet. HGH enables effective protection by reflecting the thermal ray on the
upper side of the sheet against the increase of the temperatures caused by the greenhouse effect. HGHC is Clear
type of heat shield sheet. This sheet also blocks the ultraviolet. But it is clear type, so it gives better sightseeing.
TYPICAL APPLICATIONS FEATURES & BENEFITS
• Canopy • Greater heat resistance than Polycarbonate sheet
• Skylight sheet • Shows vivid color as its light transmittance of visible
• Skybridge ray is greater than opaque thermal sheet
EXEET® HEATCUT - STANDARD SPEC
Classification Model Color Specification
Solid Sheet, Roll
HGHC00 CLEAR
• Thickness 2.0mm - 15.0mm
• Width 1,000mm - 2,100mm
• Length Order made
HGHC10 BLUE GREEN
HGHC13 GREEN
HGHC21 BLUE
HGHC40 BROWN
EXEET® HEATCUT - SOLAR ENERGY PENETRATION RATIO
Classification Polycarbonate Sheet Heatcut Sheet Clear Heatcut Sheet
HG13 HG21 HG40 HGH13 HGH21 HGH40 HGHC13 HGHC21 HGHC40
The amount of Solar energy BTU/hr-FT2 150
% 100%
The amount of Penetration BTU/hr-FT2 138 132 88 3 0 6 80 77 53
% 92% 88% 59% 2% 0% 4% 53% 51% 35%
The amount of Isolation BTU/hr-FT2 12 18 62 147 150 144 70 73 97
% 8% 12% 41% 98% 100% 96% 47% 49% 65%
※ Total Solar Energy Rejected ※ BTU : Unit for the amount of energy in British / American
- Ratio of Total solar energy absorbed ∙ Injected ∙ - 1BTU = 252cal = 1055.6J
Reflected by all the range of Solar wavelength - The amount of energy to increase 1 per 1lb
EXEET® HEATCUT - TECHNICAL DATA
Properties Test
Method Units
Clear Heatcut Sheet
HGHC13 HGHC21 HGHC40
Physical Properties
Absorptivity KS M ISO 62 % 0.11 0.11 0.11
Mechanical Properties
Tensile Strength KS M 3006 MPa 64.7 65.5 64.7
Flexural Modules KS M ISO 178 MPa 97.5 98.5 97.5
Elongation at cut off point KS M 3006 % 71 68 71
Tensile Elasticity KS M 3006 GPa 2.26 2.21 2.26
Refractive Elasticity KS M ISO 178 GPa 2.25 2.23 2.25
Rockwell Strength KS M ISO 2039-2 - 120 121 120
Charpy Impact Modulus KS M 3056 KJ/ 92 88 92
Thermal Properties
Weight Transformation Temperature KS M ISO 75-2 136 135 135
Vicat Softening Temperature KS M ISO 306 146 145 146
* The above information is typical values only, not for warranty purpose.
EXEET® HEATCUT - HEATCUT PERFORMANCE
After Infrared ray ramp turned on,
inside temperature decreased
about 6 - 8
※ To evaluate heatcut value quantitatively,
heat variations per each time are
measured by our test tools
EXEET® HEATCUT - ANALYSYS OF PENETRATION RATIO PER EACH WAVELENGTH
• Prohibiting Infrared rays range especially, Penetration ratio is lower than Polycarbonate sheet
EXEET® FINE PC – PC FILM
Exeet® Fine PC is the brand name of extruded Polycarbonate optical grade film manufactured by S Polytech Exeet®
Fine PC is designed for use as optical electronic & industrial materials in a wide variety of application according to
ISO 9001.
EXEET® FINE PC – HF EXEET® FINE PC - FPC
HF is another model name of polycarbonate sheet. FPC is the model name of polycarbonate film by
HF series has well applicable mechanical properties S Polytech. FPC series has good properties and
for Industrial use such as Nameplates & Printing good surface quality for optical application. So it
materials, Forming materials, Insulation materials can apply to Optical Coating Materials such as IT
and etc. HF offers an excellent candidate for use display window, electronic device and etc.
industrial and printing use with the properties such Especially with a strict standard of exterior inspection,
as high, and, flame retardant. FPC is suitable for special coating; anti-scratch,
anti-static, anti -glare.
TYPICAL APPLICATIONS
• Dial plate • Insulating film
• Toy cover (molding) • Nonflammable film
• Electric control product (partition) • Sun cap
• Nameplate printing • Goggle
• Front panel for electronic parts • Mobile phone and Keypad
• Electronics panel and interior material (washing machine, TV, refrigerator, etc.)
FEATURES & BENEFITS
• Excellent impact strength • Excellent printability
• Excellent transparency • Excellent heat resistance • Excellent formability
EXEET® FINE PC STANDARD SPEC
EXEET® FINE PC TECHNICAL DATA
Properties Test
Method
English
Units Value
SI
Units Value
Physical Properties
Specific Gravity ASTM D792 - 1.20 - 1.20
Water Absorption 23°C, 24 hr. ASTM D570 % 0.12 % 0.12
Optical Properties
Transmittance ASTM D1003 % 86 % 86
Haze ASTM D1003 % 1.0 % 1.0
Mechanical Properties
Tensile Strength ASTM D638 psi 65.5 Mpa 9500
Tensile Modules ASTM D638 psi 2344.2 Mpa 340000
Refractive Elasticity ASTM D790 psi 96.5 Mpa 14000
Bending Strength ASTM D790 psi 2289.0 Mpa 332000
Elongation ASTM D638 % 100 % 100
Rockwell Hardness ASTM D785 R Scale 115 R Scale 115
Thermal Properties
Load-deformation Temperature ASTM D648 132
270
137 280
Heat Conductivity ASTM D696 // 6.0x10e-5 in/in/ 3.75x10e-5
Sensitive Temperature ASTM D746 -200 -128
Ignition
Dielectric Constant @10Hz ASTM D150 - 2.36 - 2.36
Dielectric Constant @60Hz ASTM D150 - 3.17 - 3.17
Volume Resistivity ASTM D257 ohm-cm 8.20E+16 ohm-cm 8.20E+16
Stainless Steel Strip Electrodes ASTM D495 sec 10 sec 10
Tungsten Electode ASTM D495 sec 120 sec 120
* The above information is typical values only, not for warranty purpose.
EXEET® GLAS – PMMA GENERAL GRADE SHEET
S Polytech sheets helps to provide value-added solutions across a wide variety of industries ranging from
electronics and building construction. S Polytech sheet can be used to help deliver creative, easy-to-install glazing
that is built to last. Exeet Glas® is the brand name PMMA acrylic sheet manufactured by S Polytech. Exeet
Glas® has a long working life and carries a 5 year warranty against yellowing.
EXEET® GLAS – AG
AG is the model name of extruded Acrylic Sheets manufactured by S Polytech. S Polytech offers solutions to
both indoor and outdoor applications. It is available in clear and opal white standard products and a wide range
of color and designs.
AG is a continuously manufactured acrylic sheet specifically formulated to offer excellent Light transmission
characteristics. Its light weight, superior impact resistance, and ease of fabrication, make it an ideal choice for
framing articles of value. AG is produced and tested according to ISO 9001.
TYPICAL APPLICATIONS FEATURES & BENEFITS
• Soundproofing wall • Excellent transparency and weather resistance
• Lighting Display : Greater transparency than glass, Retain its beauty,
• Advertisement Display even after years of direct sunlight
• Interior • Beauty of color
: Features excellent clarity and various color
• Excellent processibility
: Superior printability, work efficiency
• Safety features : No fragmentation when product is broken
• No toxic materials
: Toxicologically harmless to human body, No toxic
gas when burning
EXEET® GLAS STANDARD SPEC
Classification Model Color Specification
Solid Sheet
AG00 Clear
• Thickness 0.8mm ~ 12.0mm
• Width 1,000mm ~ 2,100mm
• Length Order made
AG10 BLUE GREEN
AG11 LIGHT GREEN
AG13 DARK GREEN
AG21 LIGHT SKY BLUE
AG45 BROWN SMOG
• RE-CLING ULTRA WHITE PE FILM MASKING STANDARD
• FDA GRADE AVAILABLE ON REQUEST
• LIGHT TRANSMISSION CONTROL AVAILABLE ON REQUEST
• CUSTOM COLOR AVAILABLE ON REQUEST
• REEL PRODUCTS ON REQUEST
EXEET® GLAS TECHNICAL DATA
Properties Test
Method
English
Units Value
SI
Units Value
Physical Properties
Specific Gravity ASTM D792 - 1.19 - 1.19
Water Absorption 23°C, 24 hr. ASTM D570 % 0.30 % 0.30
Refractive Index ASTM D542 - 1.49 - 1.49
Optical Properties
Transmittance ASTM D1003 % 92 % 92
Yellowness ASTM D1925 YI 1.5 YI 1.5
Mechanical Properties
Tensile Strength ASTM D638 psi 71.5 Mpa 10383
Flexural Strength ASTM D790 psi 107.8 Mpa 15645
Flexural Modules ASTM D790 psi 3432.3 Mpa 497817
Elongation ASTM D638 % 2.0~4.0 % 2.0~4.0
Izod Impact Strength (@3mm) ASTM D256 J/m 15.5 ft-lbs/in 0.29
Rockwell Hardness ASTM D785 R Scale 93 R Scale 93
Thermal Properties
Load-deformation Temperature ASTM D648 96
204
105 221
Coefficient of thermal expansion ASTM D696 // 6.0x10e-5 in/in/ 3.75x10e-5
Flammability UL 94 - HB - HB
* The above information is typical values only, not for warranty purpose.
EXEET® GLAS COATING
Type Effectiveness Applications Remark
Hard Coating Surface hardnessup Soundproofing wall computer protective glass Pencil hardness H~6H
Antistatic Coating Surface antistatic Semiconductor clean room Surface resistance value
106 - 1012Ω , cm Anti-fog Coating Anti-fogging Goggle
EXEET® FINE GLAS - PMMA Film
Exeet® Fine Glas is the brand name for extruded PMMA optical grade film, manufactured by S Polytech Co.,
Ltd. Exeet® Fine Glas is designed for the use of optical electronic & industrial materials in a wide variety of
application. Exeet® Fine Glas is produced and tested according to ISO 9001.
EXEET® FINE GLAS - AF00
AF is the model name for extruded PMMA film manufactured by S Polytech. AF can be applied many industries.
It is available in clear standard products and a wide range of designs.
CHARATERISTICS
Exeet® Fine Glas has good properties and a brilliant surface. Exeet® Fine Glas has excellent transparency,
good mechanical properties. Especially it has excellent molding performance. So it can be used a wide range of
industries.
TYPICAL APPLICATIONS FEATURES & BENEFITS
• IT device window • Excellent impact strength
• Electronic parts • Transparency
• Electronic nameplate and display • Printability
• Dial plate • Heat resistance and Formability
EXEET® FINE GLAS STANDARD SPEC
Classification Model Color Specification
Solid Sheet, Roll AF00 Clear
• Thickness 0.10mm - 12.00mm
• Width 800mm - 1,250mm
• Length Order made
• Textures : Polished/Polished
• Masking : PE protective film on both sides
• Special thickness, dimension and patterns can be provided to special order, subject to special conditions.
EXEET® FINE GLAS TECHNICAL DATA
Properties Test
Method
English
Units Value
SI
Units Value
Physical Properties
Specific Gravity ASTM D792 - 1.19 - 1.19
Water Absorption 23°C, 24
hr. ASTM D570 % 0.30 % 0.30
Refractive Index ASTM D542A - 1.49 - 1.49
Optical Properties
Transmittance ASTM D1003 YI 1.5 YI 1.5
Yellowness ASTM D1003 % 92 % 92
Haze ASTM D1003 % 1.0 % 1.0
Mechanical Properties
Tensile Strength ASTM D638 psi 10442 MPa 72
Flexural Strength ASTM D790 psi 17114 Mpa 118
Flexural Modules ASTM D790 psi 507632 Mpa 3500
Surface Friction
Hardness ASTM D785 M-scale 100 M-scale 100
Abrasion Resistance ASTM D1004 %(haze) 15 %(haze) 15
Durability
Heat Resistance 24hours, 70 - No Change - No Change
Hot water Resistance 24hours, 40 - No Change - No Change
Thermal Cycle Test 10hours, -30 - No Change - No Change
10hours, 25 - No Change - No Change
Thermal Properties
Load-deformation 18.5/ ASTM D648
95
203
Temperature 4.6/ 104 219
Coefficient of thermal expansion ASTM E228 // 6.0x10e-5 in/in/ 3.75x10e-5
Drug Resistance - - No Change - No Change
Hydrocholric Acid (5%) - - No Change - No Change
Alkali (5%) - - No Change - No Change
Saline Solution (10%) - - No Change - No Change
Methanol - - No Change - No Change
Ethanol - - No Change - No Change
Toluene - - No Change - No Change
Gasoline - - No Change - No Change
* The above information is typical values only, not for warranty purpose.
EXEET® SHINELUX – POLYCARBONATE DIFFUSION SHEET
EXEET® SHINELUX is the brand name for extruded Polycarbonate diffusion sheets provided by S Polytech.EXEET®
SHINELUX is great for signboard and LED board. Because EXEET® SHINELUX provides long lasting UV resistant that just
get on with the job of promoting your products. And also it has good light and diffusion transmission. So it provides
brightness with efficiency. S Polytech polycarbonate sheets are produced and tested according to ISO 9001.
EXEET® SHINELUX LA03 - PMMA
LA03 is the PMMA diffusion sheet. LA03 is mainly used for the signboard and channel letters application. Main difference
from LH series to LA03 is LA03 is easy to mold than polycarbonate diffusion sheet.
EXEET® SHINELUX LH04 Series - POLYCARBONATE
LH04 series is mainly used for the outdoor signboard, store display, channel letters application. LH04 series is classified
between two types, polish type (LH04) and one side emboss type (LH04E).
EXEET® SHINELUX LH05 Series - POLYCARBONATE
LH05 series is mainly used for the LED lighting applications. By light transmission, LH05 series is classified between three
types, LH0545, LH0555 and LH0570. We can also provide polish type, one side emboss type and both side emboss type
of LH05 series with Anti-Static coated.
FEATURES & BENEFITS
• 2.2 times greater illuminance than other neon lights by adding light diffusion feature to polycarbonate and acrylic.
• Exhbits maximum productivity and cut to size yield as EXEET SHINELUX is available in width of 2,100mm and 1,220mm.
• Conceals light source inside the frame even in ultra slim applications.
• Using advanced PC and PMMA, EXEET SHINELUX diffuses light clean and shine with all types of light source.
• Excellent impact and weather resistance for long lasting products.
• Excellent formability.
• Excellent cost effectiveness and energy saving.
• Excellent printability and durability.
TYPICAL APPLICATIONS
• Signboards • Office Lightings
• Store Displays • Channel Letters
• Household LED Luminaries • Architectural-Lightings
STRUCTURE
The light emanated from LED lamp is diffused by the collision with diffusion bead in a diffusion plate. As a result, it is
diffused more. Diffused light has excellent diffusion transmission as well as excellent refraction transmission and high
luminance.
. LIGHT TRANSMISSION EFFICIENCY
EXEET® SHINELUX have good Light Transmission Compare to other companies, EXEET®SHINELUX
and good Luminance Transmission. offers good Transmission, Lamp Efficiency and
Low Power consumption. It will serve you an
efficiency of energy
EXEET® SHINELUX STANDARD SPEC
Type Classification Application Thickness Width Length EMBO UL
94
LA03 PMMA
Lightings for outdoor signs
2.0-12.0 ~1,250 ~3,000 NO HB
LH04
POLYCARBONATE
1.8-15.0 ~2,100
Order
Made
NO V2
LH04E 1.8-15.0 One Side EMBO V2
LH0545E
Indoor LED lightings
1.0-15.0
~1,220
One Side EMBO V2 LH0555E
LH0545B 1.0-15.0 Both Side EMBO V2
LH0555B
LH0545BF Flammability Diffusion 1.0-15.0 Both Side EMBO V0
LH0555BF
* The above information is typical values only, not for warranty purpose.
EXEET® SHINELUX TECHNICAL DATA
PROPERTY TEST METHOD UNIT VALUE
Mechanical Properties
Tensile Strength KS M 3006 Mpa(kgf/mm2) 62.4
Flexural Modulus KS M ISO 178 Mpa(kgf/mm2) 105
Tensile modulus of elasticity KS M 3006 Gpa 2.57
Flexural modulus of elasticity KS M ISO 178 Gpa 2.23
Rockwell Hardness KS M ISO 2039-2 R scale 118
Thermal Properties
Deflection temperature under load KS M ISO 75-2 139
Heat dimensional change(width)(130±2) * 30min KS M3501 % 0.02
Heat dimensional change(length)(130±2) * 30min KS M3501 % 0.2
Other properties
Water absorption KS M ISO 62 % 0.1
Surface specific resistance JIS K 6991 Ω >1016
Flammability UL94 - V2
* The above information is typical values only, not for warranty purpose.
EXEET® SHINELUX TRANSMISSION OF ILLUMINANCE
APPLICATION CLASSFICATION TYPE TRANSMISSION
Signboard
PMMA LA03 Both Side Polish
48%
POLYCARBONATE LH04 64%
LH04E One Side EMBO 65%
Lighting POLYCARBONATE
LH0545E
One Side EMBO
70%
LH0555E 76%
LH0570E 88%
LH0545B
Both Side EMBO
69%
LH0555B 76%
LH0570B 88%
LH0545EF Both Side EMBO
(Flame Retardant V0)
68%
LH0555EF 76%
LH0570EF 88%
* The above information is typical values only, not for warranty purpose.
SKYLITE® POLYCARBONATE MULTIWALL SHEET
S Polytech sheets help to meet tough challenges facing architects and builders to avoid the high maintenance or
replacement costs for glazing. Many architects and builders select it to get help by minimizes maintenance cost.
SKYLITE® Multiwall Sheet is two side UV protected polycarbonate multiwall sheet which combine Thermal Insulation,
Impact Strength, Light Weight, High Transparency. SKYLITE® Multiwall Sheet is divided according to connection type.
SKYLITE® Flat, SYS, Wings, Click.
SKYLITE® MULTIWALL SHEET - CHARACTERISTICS
Good Thermal Insulation UV Protection
The multiwall construction traps air between SKYLITE® Multiwall Sheet has on both sides
the layers, which ensures outstanding thermal sides proprietary UV-protected surface, giving
insulation performance. excellent resistance to outdoor weathering. This
protection ensures long-term optical quality
under intensive UV exposure, and maintains
the superior toughness of the superior
toughness of the polycarbonate material.
High Transparency Light Weight
The SKYLITE® Multiwall sheets have the highest An outstanding balance of low weight and high
transmission in the visible light. This useful high stiffness enables lightweight structures with
transparency can provide sunlight came in to building greater spans to be designed and easily installed
through SKYLITE® Multiwall sheets.
Ease of Installation Fire Performance
It can be easily cut on site using conventional SKYLITE® Multiwall sheet has good fire
tools and can be cold-formed into tight radii behaviour characteristics, and receives high
without preforming. Material wastage is minimal as ratings in several major European fire
the sheet will not crack or split when cut, sawed performance tests.
or drilled.
SKYLITE® MULTIWALL SHEET – SPEC & APPLICATION
SKYLITE® MULTIWALL SHEET – VARIOUS PROPERTIES
UV PROTECTION
SKYLITE® Multiwall Sheet has on both sides proprietary
UV-protected surface, giving superior resistance to outdoor
weathering. This protection helps to provide long-term
optical quality under intensive UV exposure, and maintains
the superior toughness of the polycarbonate material.
According to accelerated 3,000 hours weathering tests,
SKYLITE® Multiwall sheet is superior to non-UV protected
polycarbonate multiwall sheets. This test is comparable to
10 years outdoor exposure in moderate climate conditions.
SKYLITE® Multiwall Sheet offers a ten year limited written
warranty against discoloration, loss of light transmission
and loss of impact strength due to weathering. Yellowness
Index measurement is performed according to ASTM D1925
(1977) test. The limited written warranty states that SKYLITE
Multiwall® sheets (in a clear color) will not display a
change in Yellowness Index of more than 2 Δ
Hail Simulation
As a roof glazing material SKYLITE® Multiwall sheet is
subject to extremes of weather; storms, hailstones, wind,
snowfalls and ice formation. Under these conditions, the
product is virtually unbreakable and is able to withstand the
subsequent temperature change to sunny conditions without
breaking or buckling. In practice, hail-stones with a
diameter of 20 mm can reach a terminal velocity of
around 21 m/s. Under these conditions materials such as
glass and acrylic fail.
Thermal Insulation
The multi-wall structure of SKYLITE® sheet offers significant advantages where thermal insulation is a major
consideration. The multiwall form provides excellent insulation characteristics with heat losses significantly lower than
solid materials. Heat loss is normally referred to as the K-value, It is expressed in terms of W/m2•K.
Standard Color
Color Color No.
CLEAR 00
OPAL WHITE 03
DARK GREEN 13
SKY BLUE 21
BROWN 40
BLUE SMOG 44
METAL GRAY 80
SKYLITE® MULTIWALL SHEET - FLAT TYPE
SKYLITE® Multiwall FLAT Type are an impact resistant, energy saving, multi-wall polycarbonate glazing sheet. It
features a proprietary surface treatment which provides almost total resistance against degradation caused by UV
radiation in sunlight. The entire Multi-wall FLAT sheet range carries a Ten Year Limited Warranty against
discoloration, loss of light transmission and/or loss of strength due to weathering.
Typical applications Characteristic
• Industrial Roofs and Sidewalls • Both side UV Protect
• Commercial Greenhouses • Impact Resistant
• Sunroom, Swimming Pool and Conservatory Roofing • Light Weight
• Shopping Center Roofing • Energy Saving
• Railway/Metro Station
• Football Stadium Roofing
SKYLITE® FLAT TYPE - SPEC
SKYLITE® MULTIWALL SHEET - SYS & CLICK TYPE
SKYLITE® Multiwall Sheet SYS, in addition to the extraordinary properties of standard Multi-wall sheet. These
excellent properties result in a snap-on system which has a high stiffness and is therefore easy and fast to install.
Typical applications
• Industrial Roofs and Sidewalls
• Commercial Greenhouses
• Sunroom, Swimming Pool and Conservatory Roofing
• Shopping Center Roofing
• Railway/Metro Station
• Football Stadium Roofing
SKYLITE® Multiwall CLICK sheet system is an impact and weather resistant energy saving multiwall sheet system
with a profiled tongue and groove connection, joint cover on the outside and groove for double sided tie on the
inside. These excellent properties result in a click system which has a high stiffness and is therefore easy and fast
to install.
Typical applications
• Industrial Roofs and Sidewalls
• Commercial Greenhouses
• Sunroom, Swimming Pool
• Shopping Center Roofing
• Railway/Metro Station
• Football Stadium Roofing
SKYLITE® SYS & CLICK TYPE - SPEC
Structures Model Thickness
(mm)
Width
(mm)
Length
(mm)
Weight
(kg/)
Radius
(mm)
SR6US 16 600
Order
Made
3.3 4,000
SX9UC
/SX9UCE 40 500 4.1 -
SKYLITE® Multiwall Sheet SYS Accessory
SKYLITE® Multiwall Sheet CLICK Accessory
AL Joint Bar (SCAJ40)
PC Cap (SSPC16)
AL Joint Bar (SSAJ16)