I.S. EN 1090

Execution of steel structures and aluminium structures.

Sen Balfe Director, Sustainability and Built

Environment

Construction Products Regulation

Came into effect on 1st July 2013.

Primary purpose is to break down barriers to trade and ensure free movement of goods.

S.I. 255/2013 makes it a criminal offence not to comply and allows fines of up to 500,000 and/or up to 1 year imprisonment.

April 24, 2015 2

What is driving I.S. EN 1090?

All public contracts

Engineers, Architects

Building Contractors

Building Control Amendment Regulations 2013

Competitors

3 April 24, 2015

How does the CPR operate?

System of harmonised technical specifications.

A framework of notified bodies (NB)

Mandatory CE marking.

Mandatory Declaration of Performance.

Surveillance authorities.

4 April 24, 2015

CPR and Steel Fabrication

I.S. EN 1090-1 Execution of steel structures and aluminium structures-Part 1 Requirements for conformity assessment of structural components.

Came into effect on 1st July 2014

Factory production control requirements.

5 April 24, 2015

When does EN 1090-1 apply?

The product is covered by the scope of EN 1090-1:2009+A1:2011,

The product is a structural construction product within the meaning of the Construction Products Regulation which means:

the product is intended to be incorporated in a permanent manner in construction works (buildings or civil engineering works), and

the product has a structural function in relation to the construction work (i.e. its failure will affect the satisfaction of Basic Work Requirement 1.)

The product is not covered by a dedicated European product specification.

January 19, 2015 6

CPR Basic Requirements EN1090

January 19, 2015 7

1. Mechanical resistance and stability.

2. Safety in case of fire.

3. Hygiene health and the environment.

4. Safety and accessibility in use.

5. Protection against noise.

6. Energy economy and heat retention.

7. Sustainable use of natural resources.

Factory Production Control Cl. 6.3 of I.S. EN 1090-1

8 April 24, 2015

ISO 3834-3

ISO 9001

Aim of FPC audit

Control of Essential Characteristics Tolerances on dimensions and shape.

Weldability.

Fracture toughness, Impact resistance.

Load bearing capacity.

Deformation at serviceability limit state.

Fatigue strength.

Resistance to fire.

Reaction to fire.

Release of cadmium and its compounds.

Emission of radioactivity.

Durability

January 19, 2015 9

Execution Classes

I.S. EN 1090-2: 2008 Sets out four execution classes.

1. EXC1 e.g. Agricultural Buildings

2. EXC2 e.g. Residential or Commercial Buildings

3. EXC3 e.g. Bridges

4. EXC4 e.g. Special Structures (long span bridges)

Customer specifies the execution class, if not specified then EXC2 shall be applied. (EN1090-2 cl. 4.1.2)

January 19, 2015 10

Structural Design

In the case where structural design is carried by the manufacturer and design characteristics are declared as part of CE Marking, the manufacturer needs to establish procedures to control and verify compliance with the design brief, for checking calculations and for ensuring the competence of individuals responsible for the design.

11 April 24, 2015

Component Specification

January 19, 2015 12

Table A.1 Manufacturers declaration of properties of structural components in connection with CE marking,

depending on method of declaration.

Manufacturers tasks and delivery

Method 1 Method 2 Method 3b Method 3a

Structural design

calculations for the

component

Yes

Based on a

requirement to use a

product standard

referring to relevant

parts of Eurocodes

Yes

Based on a

requirement to use

the purchasers

design brief to meet

clients order.

None

Basis of Manufacturer MPCS MPCS MPCS PPCS

Declaration of

component

properties

Geometrical and

material information

and any other

information needed

for others to perform

structural evaluation

and calculations

Delivered

components to be in

accordance with this

European Standard

referring to relevant

parts of Eurocodes

with resistances given

as characteristic

value(s) or design

value(s)

Delivered component

to be in accordance

with MPCS and

traceable to

purchasers order.

Delivered component

to be in accordance

with PPCS

Product Evaluation

Manufacturer shall establish procedures to ensure that declared values and classes of all the characteristics are maintained.

13 April 24, 2015

Personnel

The manufacturer shall document the responsibility, authority and relationship between personnel that manage perform and verify work affecting the characteristics of the manufactured product. Including sub-contractors.

14 April 24, 2015

Equipment

All weighing, measuring and testing equipment that may have an influence on the characteristics of the steel or aluminium frames/members must be calibrated, regularly maintained and inspected.

15 April 24, 2015

Purchasing

The manufacturer shall implement a written inspection procedure for checking and recording that constituent products conform to the specification and that traceability of these products is in accordance with I.S. EN 1090-2 to the appropriate execution class

16 April 24, 2015

Component Specification

The manufacturer of components shall be controlled using a component specification giving all the necessary information in sufficient detail to enable it to be manufactured and for its conformity to be evaluated.

Written inspection and test plan.

17 April 24, 2015

Non-conforming products (NCP)

The manufacturer shall have written procedures specifying how to deal with NCP.

Such events shall be recorded as they occur and these records shall be kept for a period defined in the manufacturers written procedures.

18 April 24, 2015

Welding QMS ISO 3834

19 April 24, 2015

Welding Quality Management System (WQMS)

Responsible Welding Coordinator

Qualification of weld process specifications

Qualification of welders

Welding inspectors

NDT

Record keeping

January 19, 2015 20

Information on CE mark symbol

I.D. number of the certification body.

Name or I.D. mark of manufacturer + address

Last two digits of year which label was attached

Number of EC FPC certificate

Reference to EN 1090-1:2009+A1:2011

Description of components; generic name, materials, dimensions and intended use.

Information on essential characteristics.

Execution class

Reference to component specification.

January 19, 2015 21

CE Mark

0050 Big Steel Co. Cootehill Co. Cavan

15

CPR-0050-1234

EN 1090-1:2009+A1:2011

Welded steel beam M 324

First floor support Virginia Library

Tolerances on geometrical data: EN 1090-2

Weldability: Steel S355J0 according to EN 10025-2.

Fracture Toughness: 27J at 00C

Reaction to fire: Material classified: Class A1

Release of cadmium: NPD

Emission of radioactivity: NPD

Durability: Surface preparation according to EN 1090-2, preparation grade P3. Surface painted

according to EN ISO 12944-5, S.1.09.

Structural characteristics:

Design: NPD

Manufacturing: According to component specification CS-034/2015 and EN 1090-2, execution class

EXC2

January 19, 2015 22

How to CE mark your product

1. Implement FPC as described.

2. Apply to NB for certification

3. Undergo FPC audit

4. Draft declaration of performance (DOP)

5. Affix CE mark

23 April 24, 2015

Contact NSAI

Sen Balfe Director

Sustainability and the Built Environment

Email: sean.balfe@nsai.ie

Tel: 01 8073943

NSAI

1 Swift Square, Northwood, Santry, Dublin 9.

Tel: 01 8073800

Email: info@nsai.ie

Web: www.nsai.ie (apply online for certification)

Purchase Standards from www.standards.ie

January 19, 2015 24

mailto:sean.balfe@nsai.iemailto:info@nsai.iehttp://www.nsai.ie/http://www.standards.ie/

Thank You

January 19, 2015 25