REMA TIP TOP - CONCRETE DISCHARGE CHUTESeamless rubber sleeves

Excellent wear resistanceUV stable, Seamless sleeve

REMA TIP TOP - CONCRETE DISCHARGE CHUTEConcrete Solutions

BackgroundWear and tear caused by varying height truck mixers and high volume concrete batching can result in frequent failure when using low grade discharge chutes. Repeated replacement creates excessive maintenance cost to plant, interruptions to production and repeated health and safety risks from working at height.

At REMA TIP TOP INDUSTRY UK Limited we manufacture discharge chutes which have been designed and engineered to provide effective and durable resistance to dispensed concrete ready mix, UV light and vehicle reversing.

Key features• Excellent resistance to abrasion, tearing and weather. • UV stable.• Seamless sleeve.

Benefits• Maintenance - Ease of changing the units compared to other

competitors units.• Productivity - less plant downtime, better reliability.• Risk - reduce time working at height.• No clagging.• Simplify Loading - high visibility for easier truck positioning.• Competitively priced.

Manufacturing and development REMA TIP TOP INDUSTRY manufacture and develop the concrete discharge chutes at their UK design and production facility in Doncaster. The chutes (socks) are fabricated using high grade abrasion resistant inner rubber with a 2 mm outer UV stable Seamless sleeve.

Typical sizesDiameter Length6“(152.4mm) 1400mm8“(203.2mm) 1400mm10“(254mm) 1400mm12“(304.8mm) 1400mm16“(406.4mm) 1400mm20“(508mm) 1400mm24“(609.6mm) 1400mm

Concrete discharge chutes are available with either 6mm, 8mm or 10mm inner sleeve. In addition to the inner dimension, The UV protective lining is 2mm thick.

Please contact a technical sales representative for a full breakdown of pricing and product information to determine the correct specification for your individual requirements.

Installation process

3 · 4 CONCRETE DISCHARGE CHUTE

REMA TIP TOP - CONCRETE DISCHARGE CHUTESeamless service

REMA TIP TOP service depots:Eastern Division DoncasterMidland Division Stoke-On-TrentEast Anglia Division ThetfordNorth West Division StandishWestern Division BristolSouth Wales Division BridgendSouth East Division DartfordNorth East Division HartlepoolScotland Division HamiltonIreland Division Kells

Comprehensive industry service• Rubber Belting• Drum Lagging• Conveyor Maintenance• Chute Lining• Wear Protection • Fabrication• Installation• Service 24/7 - 365 days

Industrial product grades

Q 09541

Prin

ted

in U

nite

d Ki

ngdo

m

REMA TIP TOP INDUSTRY UK LIMITEDPlumtree Industrial EstateHarworth · Doncaster · DN11 8EW

Phone: +44 01302 711233Fax: +44 01302 711988info@tip-top.co.ukwww.rema-tiptop.co.uk

Your local contact