EX

CE

L® G

rad

e 8

pro

du

cts

190

17

18

19

20

EXCEL® Grade 8 products

ApplicationsEXCEL® Grade 8 chain components are designed to be used in the manufacturing of grade 8 chain slings.

RangeVan Beest offers a wide range of grade 8 chain components that enables the assembly of a complete sling from the top master link to the hooks.The range extends from 6 mm to 32 mm (1/4” to 1 1/4”).

DesignEXCEL® Grade 8 chain components are manufactured from drop forged alloy steel.Most master links, eye- and swivel hooks have a flat part to facilitate easy assembly with the omega link. All EXCEL® swivel hooks are equipped with needle roller thrust bearings.

These components are generally marked with: - manufacturer’s identification symbol n EXCEL- chain diameter in mm and/or inch n e.g. 13 and/or 1/2”- traceability code n e.g. HA- steel grade n 8- item code n e.g. MJ- origin n FRANCE

FinishEXCEL® grade 8 components are powder coated yellow or red.

CertificationSpecific details of certificate availability can be found on each product page.Please verify your certification requirements with Van Beest at time of order.

DGUV Type ApprovalMore than 150 EXCEL® products are DGUV Type Approved (Deutsche Gesetzliche Unfallversicherung). This allows us to H-stamp the components with our unique H number (H94).

Tests are based on GS-OA-15-05:2012-05: Principles for the testing and certification of chains and chain components. These components are Type approved to EN818-2 or EN1677

On the product pages the DGUV icon indicates that this product group is approved, or see our website for the complete list of approved products and their certificates.

TestingProofloads for grade 8 products are applied as per following table and certificates can be supplied upon request.

for chain diameter Working Load Limit(WLL)

Proofload(PL)

Minimum Breaking (MBL)

mm inch t t t

5 3/16 0.8 2 3.2 6 7/32 1.12 2.8 4.48 7 1/4 1.57 3.93 6.28 8 5/16 2 5 810 3/8 3.2 8 12.813 1/2 5.4 13.5 21.616 5/8 8.2 20.5 32.820 3/4 12.8 32 51.222 7/8 15.5 38.75 6226 1 21.6 54 86.432 1 1/4 32.8 82 131.2

Instructions for useAll grade 8 components should be inspected before use to ensure that:

•allmarkingsarelegible;•itemswiththecorrectWLLhavebeenselected.Forfurtherdetails,werefertoEN818standardforchainslings;•allcomponentsoftheslingmustbeofthesamesteelgrade;•itemsshouldbeusedforin-lineliftingonly;•thebolt,nutoranyotherlockingsystemcannotvibrateoutofposition;•itemsarenotdistortedorundulyworn;•allitemsarefreefromnicks,gouges,cracksandcorrosion;•itemsmaynotbeheattreatedasthismayaffecttheirWLL;•nevermodify,repairorreshapeanitembymachining,welding,heatingorbendingasthismayaffecttheWLL.

For a detailed explanation on the correct (dis)assembly of clevis fittings, we refer to the instruction PI-03-06 in the FAQ section on our website.

INFO

DGUV

EX

CE

L® G

rade 8 p

rod

ucts

191

17

18

19

20

TemperatureIf extreme temperature situations occur, the following load reductions must be taken into account:

Temperature°Celsius

Reduction for elevated temperaturesNew Working Load Limit

-40 °C up to 200 °C 100%oforiginalWLL

200 – 300 °C 90%oforiginalWLL

300 – 400 °C 75%oforiginalWLL

> 400 °C not allowed

If a sling has been temporarily used under extreme temperature conditions with the appropriate WLL reduction, there is no need to continue to reduce the WLL once it is used again in standard conditions. If a sling has accidentally been exposed to excessive temperatures, for example due to exposure to a fire, the chain sling should be with-drawn from service.

InspectionThe components must be regularly inspected in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading, etc. which may lead to deformation and alteration of the material structure.Inspection by a competent person should take place at least every six months and more frequently when the components are used in severe operating conditions.

Working Load Limit table for Grade 8 Chain Slings to EN 818-4

Chain Ø

1 leg sling

2 leg sling 3 or 4 leg sling Endless sling0°<ß ≤ 45° 45°<ß ≤ 60° 0°<ß ≤ 45° 45°<ß ≤ 60°

Safety factor1.4

Safety factor1.0

Safety factor2.1

Safety factor1.5

Safety factor1.6

mm inch t t t t t t 5 3/16 0.8 1.12 0.8 1.60 1.18 1.25 6 7/32 1.12 1.60 1.12 2.36 1.70 1.80 7 1/4 1.50 2.12 1.50 3.15 2.24 2.50 8 5/16 2.00 2.80 2.00 4.25 3.00 3.1510 3/8 3.15 4.25 3.15 6.70 4.75 5.0013 1/2 5.30 7.50 5.30 11.20 8.00 8.5016 5/8 8.00 11.20 8.00 17.00 11.80 12.5020 3/4 12.50 17.00 12.50 26.50 19.00 20.0022 7/8 15.00 21.20 15.00 31.50 22.40 23.6026 1 21.20 30.00 21.20 45.00 31.50 33.5032 1 1/4 31.50 45.00 31.50 67.00 47.50 50.00

Working Load Limit table for Grade 8 Chain Slings generally to ASME B30.9

Chain Ø

1 leg sling

2 leg sling 3 or 4 leg sling Endless sling0°<ß ≤ 30° 30°<ß ≤ 45° 45°<ß ≤ 60° 0°<ß ≤ 30° 30°<ß ≤ 45° 45°<ß ≤ 60°

Safety factor 1.73

Safety factor

1.4

Safety factor

1.0

Safety factor

2.6

Safety factor

2.1

Safety factor

1.5

Safety factor

1.6mm inch t t t t t t t t 5 3/16 0.8 1.38 1.12 0.8 2.10 1.60 1.18 1.25 6 7/32 1.12 1.94 1.60 1.12 2.90 2.36 1.70 1.80 7 1/4 1.50 2.60 2.12 1.50 3.90 3.15 2.24 2.50 8 5/16 2.00 3.46 2.80 2.00 5.20 4.25 3.00 3.1510 3/8 3.15 5.45 4.25 3.15 8.20 6.70 4.75 5.0013 1/2 5.30 9.20 7.50 5.30 13.80 11.20 8.00 8.5016 5/8 8.00 13.80 11.20 8.00 20.80 17.00 11.80 12.5020 3/4 12.50 21.60 17.00 12.50 32.50 26.50 19.00 20.0022 7/8 15.00 26.00 21.20 15.00 39.00 31.50 22.40 23.6026 1 21.20 36.70 30.00 21.20 55.00 45.00 31.50 33.5032 1 1/4 31.50 54.50 45.00 31.50 82.00 67.00 47.50 50.00

192

17

18

19

20

EX

CE

L® G

rad

e 8

pro

du

cts

MS

b

c

a

d

b

c

a

d

EXCEL® Master link, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : generally to EN 1677-4•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MTC b

•Note : from 50 t without flat part

diameter chain 1 leg

diameter chain2 legs

working loadlimit

dia-meter

length inside width inside

thick-ness

weight each

mmß ≤ 45° ß ≤ 60°

ta b c d

kgmm mm mm mm mm mm

6-7 6 6-7 1.6 13 100 60 7 0.33 8 7-8 8 3.2 16 120 70 7 0.5610 10 10 4.5 18 135 75 9 0.813 - 13 6.2 20 150 90 9 1.1116 13 16 8.2 22 150 90 11 1.3618 - 18 10.6 25 170 95 13 1.9620 16 19 12.8 28 200 120 13 2.92

20-22 18 20-22 15.5 30 200 120 17 3.4- 19-20 - 20 36 250 150 17 6.1

26 22 26 25 38 250 150 21 6.8- 26 - 30 44 280 170 21 10.8

32 - 32 37 45 300 200 23 11.7- 32 - 50 50 300 200 - 14.75- - - 63 55 350 200 - 20- - - 100 70 400 250 - 39- - - 125 80 400 250 - 52

In inch

diameter chain 1 leg

diameter chain2 legs

working loadlimit

dia-meter

length inside width inside

thick-ness

weight each

inchß ≤ 30° ß ≤ 45 ß ≤ 60

ta b c d

lbsinch inch inch inch inch inch inch7/32 -

1/4 - 7/327/32 - 1/4 1.6 1/2 3 15/16 2 3/8

9/32 0.733/8

7/32 - 1/41/4 - 5/16

5/16 3.2 5/8 4 23/32 2 3/49/32 1.23

3/85/16

3/83/8 4.5 23/32 5 5/16 2 15/16

11/32 1.761/2

3/8 - 1/2 6.2 25/32 5 29/32 3 17/3211/32 2.45

5/8 - 1/25/8 8.2 7/8 5 29/32 3 17/32

7/16 2.993/4

1/2 - 3/4 10.6 31/32 6 11/16 3 3/41/2 4.32

3/4 - 5/83/4 12.8 1 3/32 7 7/8 4 23/32

1/2 6.443/4 -

7/85/8

3/43/4 - 7/8 15.5 1 3/16 7 7/8 4 23/32

21/32 7.5- 3/4

3/4 - 20 1 13/32 9 27/32 5 29/3221/32 13.5

1 3/47/8 1 25 1 1/2 9 27/32 5 29/32

13/16 15- 7/8 1 - 30 1 23/32 11 1/32 6 11/16

13/16 23.81 1/4 1 - 1 1/4 37 1 25/32 11 13/16 7 7/8

29/32 25.8- - 1 1/4 - 50 1 31/32 11 13/16 7 7/8 - 32.5- 1 1/4 - - 63 2 5/32 13 25/32 7 7/8 - 44.1- - - - 100 2 3/4 15 3/4 9 27/32 - 86- - - - 125 3 5/32 15 3/4 9 27/32 - 115

EX

CE

L® G

rade 8 p

rod

ucts

193

17

18

19

20

MTS

EXCEL® Master link assembly, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : generally to EN 1677-4•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MTC b

•Note : from 60 t without flat part

diameter chain 3/4 legs

working load limit

dia- meter

length inside

width inside

dia-meter

length inside

width inside

thick-ness

weight each

ß ≤ 45° ß ≤ 60° a b c d e f gmm mm t mm mm mm mm mm mm mm kg

6 6-7 2.5 16 120 70 13 100 60 7 1.16 6-7 8 3.5 18 135 75 16 100 60 6 1.75 8 10 6.5 22 150 90 18 120 70 9 2.810 13 8.5 25 170 95 20 120 70 11 3.82- - 10 28 200 120 20 120 70 11 4.7

13 16 13 30 200 120 22 135 75 14 5.8516 18-19 17 36 250 150 25 135 75 14 9.35- 20 20 38 250 150 28 170 95 17 11.75

18-20 22 27 45 280 170 33 200 120 17 18.5- - 30 45 300 200 36 200 120 21 22

22 26 40 50 300 200 38 150 90 21 2426 32 50 55 300 200 38 150 90 23 27- - 60 58 350 200 42 150 90 - 34

32 - 80 70 400 250 55 300 150 - 72- - 100 80 400 250 58 300 150 - 92

In inch

diameter chain 3/4 legs

working load limit

dia- meter

length inside

width inside

dia-meter

length inside

width inside

thick-ness

weight each

ß ≤ 30 ß ≤ 45° ß ≤ 60° a b c d e f ginch inch inch t inch inch inch inch inch inch inch lbs

- 7/327/32 - 1/4 2.5 5/8 4 23/32 2 3/4

1/2 3 15/16 2 3/8 9/32 2.56

7/327/32 - 1/4

5/16 3.5 23/32 5 5/16 2 15/16 5/8 3 15/16 2 3/8

1/4 3.861/4 - 5/16

5/163/8 6.5 7/8 5 29/32 3 17/32

23/32 4 23/32 2 3/411/32 6.17

3/83/8

1/2 8.5 31/32 6 11/16 3 3/425/32 4 23/32 2 3/4

7/16 8.42- - - 10 1 3/32 7 7/8 4 23/32

25/32 4 23/32 2 3/4 7/16 10.4

- 1/25/8 13 1 3/16 7 7/8 5 29/32

7/8 5 5/16 2 15/16 9/16 12.9

1/25/8

3/4 17 1 13/32 9 27/32 5 29/3231/32 5 5/16 2 15/16

9/16 20.6- - 3/4 20 1 1/2 9 27/32 5 29/32 1 3/32 6 11/16 3 3/4

21/32 25.95/8 - 3/4

3/47/8 27 1 25/32 11 1/32 6 11/16 1 5/16 7 7/8 4 23/32

21/32 40.83/4 - - 30 1 25/32 11 13/16 7 7/8 1 13/32 7 7/8 4 23/32

13/16 48.53/4 - 7/8

7/8 1 40 1 31/32 11 13/16 7 7/8 1 1/2 9 27/32 3 17/3213/16 52.9

- 1 1 1/4 50 2 5/32 11 13/16 7 7/8 1 1/2 9 27/32 3 17/3229/32 59.5

1 - - 60 2 9/32 13 25/32 7 7/8 1 21/32 9 27/32 3 17/32 - 75- 1 1/4 - 80 2 3/4 15 3/4 9 27/32 2 5/32 11 13/16 5 29/32 - 159

1 1/4 - - 100 3 5/32 15 3/4 9 27/32 2 9/32 11 13/16 5 29/32 - 203

g

a

c

b

e

f

d

g

a

c

b

e

f

d

EX

CE

L® G

rad

e 8

pro

du

cts

194

17

18

19

20

MP

CO

a

fe

h

c

i

d

b

j

g

d f

e

g

b

c

a

a

fe

h

c

i

d

b

j

g

EXCEL® Omega link EN1677-1, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : EN 1677-1•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MPI b DGUV

for chain diameter

working load limit

width diameter pin

width length inside

width bow

length outside

thick-ness

width outside

width outside

thick-ness

weight each

a b c d e f g h i jmm inch t mm mm mm mm mm mm mm mm mm mm kg

5 3/16 0.8 14 6 7 26 20 53 13 41 28 6 0.076 7/32 1.12 14 8 7 25 20 53 13 41 28 6 0.07

7-8 1/4 - 5/16 2 20 9 9 34 24 71 16 55 32 8 0.2010 3/8 3.2 19 13 12 40 31 82 17 63 42 11 0.2813 1/2 5.4 25 16 15 51 40 106 20 84 54 14 0.6416 5/8 8.2 32 20 19 64 48 132 25 104 68 17 1.28

18-20 3/4 12.8 38 24 23 80 59 163 30 126 82 22 2.25

EXCEL® Pear shaped link, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : EN 1677-4•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MPI b

for chain diameter

working load limit

length diameterpin

width lengthinside

widthinside

length widthoutside

weighteach

a b c d e f gmm inch t mm mm mm mm mm mm mm kg

5 3/16 0.8 85 6 7 64 33 109 55 0.146 7/32 1.12 84 8 7 64 33 109 55 0.14

7-8 1/4 - 5/16 2 101 9 9 77 40 132 69 0.3410 3/8 3.2 125 13 12 97 50 165 84 0.7713 1/2 5.4 161 16 15 125 66 213 110 1.6216 5/8 8.2 198 20 19 154 84 262 140 2.72

18-20 3/4 12.8 253 24 23 198 104 331 166 4.28

EX

CE

L® G

rade 8 p

rod

ucts

195

17

18

19

20

CHAIN

MJ

a b

c

a

c

f

b

d

e

g

a

c

f

b

d

e

g

EXCEL® Connecting link EN1677-1, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : EN 1677-1•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MPI b DGUV

for chain diameter

working load limit

diameter width outside

width inside

length inside

length inside

diameter eye

width inside

weight each

a b c d e f gmm inch t mm mm mm mm mm mm mm kg

6 7/32 1.12 8 42 11 20 52 11 15 0.097-8 1/4 - 5/16 2 9 53 14 20 55 13 19 0.1510 3/8 3.2 10 66 18 23 64 18 23 0.2813 1/2 5.4 14 83 21 32 85 24 28 0.6316 5/8 8.2 17 103 25 40 105 28 34 1.16

18-20 3/4 12.8 21 120 33 50 129 33 42 1.9522 7/8 15.5 23 143 40 55 140 37 51 2.9426 1 21.6 26 160 45 60 153 46 57 4.1232 1 1/4 32.8 39 197 52 68 174 56 67 8.3

INFO

Lifting chain EN818-2, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : EN 818-2•Finish : painted black

• Certification :: 2.1 2.2 3.1 MTC b DGUV

diameter working load limit

length inside

width outside

links per meter

length per drum

weight per mtr

at

b cm kgmm inch mm mm

6 7/32 1.12 18 22 55.56 600 0.78 7 1/4 1.5 21 26 47.62 500 1.14 8 5/16 2 24 30 41.67 350 1.510 3/8 3.15 30 36 33.33 250 2.2713 1/2 5.3 39 47 25.64 150 3.7416 5/8 8 48 58 20.83 100 5.5420 3/4 12.5 60 72 16.67 60 8.9422 7/8 15 66 79 15.15 50 11.5726 1 21.2 78 93 12.82 30 15.2632 1 1/4 31.5 96 112 10.42 50 22.61

EX

CE

L® G

rad

e 8

pro

du

cts

196

17

18

19

20

CSC

CSO

fb

dg

i

ha

e

c

bf

j

a

e

h

i

c

dg

EXCEL® Eye sling hook EN1677-2, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : EN 1677-2•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MPI b DGUV

•Note : from 8.2 t without flat part

for chain diameter

working load limit

length dia-meter inside eye

width opening

thick-ness

width dia-meter eye

outside

width outside

length outside

width thick-ness

weight each

mm inch ta b c d e f g h i j

kgmm mm mm mm mm mm mm mm mm mm

5-6 3/16 - 7/32 1.12 84 23 26 15 20 43 72 114 10 6 0.287-8 1/4 - 5/16 2 103 26 30 20 24 51 87 139 12 8 0.5610 3/8 3.2 128 35 33 24 29 65 106 172 15 10 1.0913 1/2 5.4 152 41 37 32 39 77 133 209 18 12 1.9816 5/8 8.2 190 52 44 40 44 94 165 255 21 16 3.55

18-20 3/4 12.8 237 60 61 49 62 115 208 327 28 21 7.122 7/8 15.5 280 72 75 54 65 132 242 375 30 23 9.926 1 21.6 259 70 73 70 75 144 235 371 37 37 13.332 1 1/4 32.8 299 66 87 78 89 150 281 430 42 42 21.6

EXCEL® Clevis sling hook EN1677-2, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : EN 1677-2•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MPI b DGUV

for chain diameter

working load limit

length width width opening

thick-ness

width width outside

width outside

length outside

dia-meter

pin

weight each

mm inch ta b c d e f g h i

kgmm mm mm mm mm mm mm mm mm

5 3/16 0.8 76 7 26 15 20 28 72 108 6 0.296 7/32 1.12 75 7 26 15 20 28 72 108 8 0.29

7-8 1/4 - 5/16 2 95 9 30 20 24 32 87 136 9 0.5810 3/8 3.2 113 12 33 24 29 42 106 164 13 1.113 1/2 5.4 138 15 37 32 39 54 133 208 16 2.1216 5/8 8.2 161 19 44 40 44 68 165 240 20 3.67

18-20 3/4 12.8 198 23 61 49 62 82 208 305 24 7.3222 7/8 15.5 236 25 75 54 65 97 242 350 28 10.63

EX

CE

L® G

rade 8 p

rod

ucts

197

17

18

19

20

CSECA

CSE

ha

fb

i

a h

f

bj

c

e

g

d

i

EXCEL® Swivel sling hook EN1677-2, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : EN 1677-2•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MPI b DGUV

•Note : equipped with needle roller thrust bearing

for chain diameter

working load limit

length length inside

width inside

width opening

thick-ness

width width outside

length outside

dia-meter

thick-ness

weight each

mm inch ta b c d e f g h i j

kgmm mm mm mm mm mm mm mm mm mm

5-6 3/16 - 7/32 1.12 100 33 32 26 15 20 72 164 12 6 0.557-8 1/4 - 5/16 2 126 39 37 30 20 24 87 200 14 8 110 3/8 3.2 159 47 48 33 24 29 106 250 16 11 1.913 1/2 5.4 189 59 58 37 32 39 133 307 21 14 3.3916 5/8 8.2 216 68 73 44 40 44 165 352 25 17 6.25

18-20 3/4 12.8 263 87 82 61 49 62 208 437 25 22 10.5

EXCEL® Swivel sling hook with clevis EN1677-2, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : EN 1677-2•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MPI b DGUV

•Note : equipped with needle roller thrust bearing

for chain diameter

working load limit

length width width opening

thick-ness

width width outside

width outside

length diameter pin

weight each

mm inch ta b c d e f g h i

kgmm mm mm mm mm mm mm mm mm

5 3/16 0.8 126 7 26 15 20 56 72 159 6 0.566 7/32 1.12 125 7 26 15 20 56 72 159 8 0.56

7/8 1/4 - 5/16 2 153 9 30 20 24 65 87 194 9 0.9910 3/8 3.2 188 12 33 24 29 79 106 240 13 1.9513 1/2 5.4 224 15 37 32 39 96 133 294 16 3.5416 5/8 8.2 270 19 44 40 44 121 165 350 20 6.61

EX

CE

L® G

rad

e 8

pro

du

cts

198

17

18

19

20

XLC

XLO

f

b

dg

c

i

ha

e

bf

j

a

i

h

e

d

g

c

EXCEL® Eye self locking hook EN1677-3, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : EN 1677-3•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MPI b DGUV

•Note : from 12.8 t without flat part

for chain diameter

working load limit

length diameter inside eye

width opening

thick-ness

width width outside

width outside

length width thick-ness

weight each

mm inch ta b c d e f g h i j

kgmm mm mm mm mm mm mm mm mm mm

5-6 3/16 - 7/32 1.12 111 24 32 16 26 47 77 147 11 7 0.517-8 1/4 - 5/16 2 134 29 43 23 29 57 92 176 14 7 0.9110 3/8 3.2 168 35 47 32 35 69 111 219 17 10 1.7913 1/2 5.4 199 46 61 37 45 87 142 264 20 13 3.3616 5/8 8.2 247 59 74 43 56 111 185 328 26 16 7

18-20 3/4 12.8 282 69 88 51 63 126 207 374 28 20 9.22

EXCEL® Clevis self locking hook EN1677-3, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : EN 1677-3•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MPI b DGUV

for chain diameter

working load limit

length width width opening

thick-ness

width width outside

width outside

length diameter pin

weight each

mm inch ta b c d e f g h i

kgmm mm mm mm mm mm mm mm mm

5 3/16 0.8 92 7 32 16 26 28 77 131 6 0.496 7/32 1.12 92 7 32 16 26 28 77 131 8 0.49

7-8 1/4 - 5/16 2 116 9 43 23 29 32 92 161 9 0.9110 3/8 3.2 143 12 47 32 35 42 111 200 13 1.7713 1/2 5.4 167 15 61 37 45 54 142 242 16 3.3316 5/8 8.2 201 19 74 43 56 68 185 293 20 6.75

18-20 3/4 12.8 232 23 88 51 63 82 207 341 24 9.57

EX

CE

L® G

rade 8 p

rod

ucts

199

17

18

19

20

GKC

GKO

f

b

dg

c

i

ha

e

bf

j

a

i

h

e

d

g

c

EXCEL® Eye self locking hook, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 MPI b

for chain diameter

working load limit

length diameter inside eye

width opening

thick-ness

width width outside

width outside

length width thick-ness

weight each

mm inch ta b c d e f g h i j

kgmm mm mm mm mm mm mm mm mm mm

7-8 1/4 - 5/16 2 113 24 32 17 25 48 77 151 13 9 0.5310 3/8 3.2 134 30 43 24 29 59 92 180 17 10 0.9413 1/2 5.4 170 39 47 32 34 75 111 225 20 12 1.8616 5/8 8.2 207 49 61 37 46 93 142 273 22 15 3.49

18-20 3/4 12.8 257 60 74 43 57 117 185 341 28 21 7.3322 7/8 15.5 290 71 88 52 62 133 207 383 31 21 9.91

EXCEL® Clevis self locking hook, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 MPI b

for chain diameter

working load limit

length width width opening

thick-ness

width width outside

width outside

length diameter pin

weight each

mm inch ta b c d e f g h i

kgmm mm mm mm mm mm mm mm mm

7-8 1/4 - 5/16 2 85 9 32 17 25 32 77 136 9 0.5510 3/8 3.2 116 12 43 24 29 42 92 168 13 1.0213 1/2 5.4 153 15 47 32 34 54 111 218 16 2.0116 5/8 8.2 166 19 62 37 46 66 142 247 20 3.7

18-20 3/4 12.8 215 23 74 43 57 80 185 312 24 7.5922 7/8 15.5 242 25 88 52 62 98 207 353 28 10.3

EX

CE

L® G

rad

e 8

pro

du

cts

200

17

18

19

20

GKE

XLE

c

e

g

bj

a h

f

d

i

c

e

g

bj

a h

f

d

i

EXCEL® Swivel self locking hook EN1677-3, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : EN 1677-3•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MPI b DGUV

•Note : equipped with needle roller thrust bearing

for chain diameter

working load limit

length length inside

width inside

width opening

thick-ness

width width outside

length diameter thick-ness

weight each

mm inch ta b c d e f g h i j

kgmm mm mm mm mm mm mm mm mm mm

5-6 3/16 - 7/32 1.12 122 32 32 32 16 26 77 192 12 6 0.787-8 1/4 - 5/16 2 148 39 37 43 23 29 92 231 14 8 1.3910 3/8 3.2 183 46 48 47 32 35 111 282 16 11 2.5613 1/2 5.4 214 57 58 61 37 45 142 336 21 14 4.5616 5/8 8.2 269 65 73 74 39 56 185 416 25 17 9.37

18-20 3/4 12.8 303 87 82 88 51 63 207 480 25 22 12.7

EXCEL® Swivel self locking hook, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 MPI b

•Note : equipped with needle roller thrust bearing

for chain diameter

working load limit

length length inside

width inside

width opening

thick-ness

width width outside

length diameter thick-ness

weight each

mm inch ta b c d e f g h i j

kgmm mm mm mm mm mm mm mm mm mm

7-8 1/4 - 5/16 2 122 33 32 32 17 25 77 192 12 6 0.7710 3/8 3.2 148 40 37 43 24 29 92 231 14 8 1.3813 1/2 5.4 185 47 48 47 32 34 111 282 16 11 2.5616 5/8 8.2 213 60 58 61 37 46 142 339 21 14 4.58

18-20 3/4 12.8 268 62 73 74 43 57 185 417 25 17 9.5122 7/8 15.5 305 88 82 90 52 62 207 480 25 22 12.85

EX

CE

L® G

rade 8 p

rod

ucts

201

17

18

19

20

XLBA

g

fb

ha

i

c

d

e

EXCEL® Swivel clevis self locking hook EN1677-3, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL •Standard : EN 1677-3 •Finish : painted red (R)

• Certification :: 2.1 2.2 3.1 MPI b DGUV

•Note : equipped with needle roller thrust bearing

for chain diameter

working load limit

length width width opening

thickness width width outside

width outside

length diameter pin

weight each

mm inch ta b c d e f g h i

kgmm mm mm mm mm mm mm mm mm

5 3/16 0.8 148 7 32 17 27 56 77 188 6 0.76 7/32 1.12 148 7 32 17 27 56 77 188 8 0.8

7-8 1/4 - 5/16 2 176 9 43 24 31 65 92 221 9 1.410 3/8 3.2 214 12 47 32 37 79 111 271 13 2.6 13 1/2 5.4 250 15 61 37 47 96 142 325 16 4.716 5/8 8.2 319 19 74 43 67 121 185 411 20 9.8

EX

CE

L® G

rad

e 8

pro

du

cts

202

17

18

19

20

GCV

GC

a

f

e

c

b

d

a

f

c

b

e

d

g

EXCEL® Shortening clutch EN1677-1, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : EN 1677-1•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MPI b

for chaindiameter

working load limit

length width inside

length width outside

width diameter pin

weight each

mm inch ta b c d e f

kgmm mm mm mm mm mm

6 7/32 1.12 54 22 75 42 7 8 0.237-8 1/4 - 5/16 2 69 30 94 50 9 9 0.4410 3/8 3.2 79 37 116 63 12 13 0.8713 1/2 5.4 105 48 149 79 15 16 1.7616 5/8 8.2 129 60 185 100 19 20 3.44

18-20 3/4 12.8 140 75 205 111 23 24 4.02

INFO

EXCEL® Shortening clutch with locking EN1677-1, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : EN 1677-1•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MPI b

for chain diameter

working load limit

length widthinside

length width outside

width diameter pin

diameter pin

weight each

mm inch ta b c d e f g

kgmm mm mm mm mm mm mm

6 7/32 1.12 54 22 75 42 7 8 7 0.25 8 5/16 2 69 30 94 50 9 9 8 0.4510 3/8 3.2 79 37 116 63 12 13 12 0.8713 1/2 5.4 105 48 149 79 15 16 16 1.7616 5/8 8.2 129 60 185 100 19 20 20 3.120 3/4 12.8 140 75 205 111 23 24 20 3.7

INFO

EX

CE

L® G

rade 8 p

rod

ucts

203

17

18

19

20

GDV

a

b

c

d

e

f

EXCEL® Shortening clutch with double locking, EN 1677-1, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : EN 1677-1•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MPI b

for chain diameter

workingload limit

length width inside

length width outside

width diameter pin

weight each

mm inch ta b c d e f

kgmm mm mm mm mm mm

6 7/32 1.12 99 23 120 42 7 7 0.49 8 5/16 2 112 30 140 50 9 8 0.7713 1/2 5.4 178 49 208 79 15 16 2.85

INFO

EX

CE

L® G

rad

e 8

pro

du

cts

204

17

18

19

20

CRO

d

g

a

f

bc

h

e

i

CRC

d

g

a

f

bc

h

e

i

c

i

g

e

d

b

a

f

h

j

EXCEL® Eye grab hook EN1677-1, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : EN 1677-1•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MPI b DGUV

for chain diameter

working loadlimit

length inside length

eye

inside width eye

opening thick-ness

width width outside

length outside

width thick-ness

weight each

mm inch ta b c d e f g h i j

kgmm mm mm mm mm mm mm mm mm mm

6 7/32 1.12 41 24 23 8 24 20 42 94 9 6 0.257-8 1/4 - 5/16 2 53 27 26 10 33 23 53 115 10 8 0.4510 3/8 3.2 65 38 36 12 40 29 66 146 14 10 0.9113 1/2 5.4 83 42 41 15 56 40 88 183 16 12 1.9916 5/8 8.2 103 44 41 18 66 43 96 211 20 20 2.4920 3/4 12.8 130 37 37 22 75 48 128 241 26 26 4.322 7/8 15.5 120 44 44 25 77 57 132 247 26 26 8.526 1 21.6 158 46 46 30 100 82 177 320 32 32 14.732 1 1/4 32.8 210 57 57 38 91 88 215 395 39 39 18

EXCEL® Clevis grab hook EN1677-1, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Standard : EN 1677-1•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MPI b

for chain diameter

working load limit

length width width outside

opening thick-ness

width width outside

length outside

diameter pin

weight each

mm inch ta b c d e f g h i

kgmm mm mm mm mm mm mm mm mm

6 7/32 1.12 52 7 28 7 24 19 42 86 8 0.287-8 1/4 - 5/16 2 64 9 32 10 33 23 53 104 9 0.4510 3/8 3.2 75 12 42 12 40 29 66 127 13 0.8813 1/2 5.4 103 15 54 15 56 40 88 173 16 2.1716 5/8 8.2 127 19 68 18 65 43 96 208 20 2.81

c

i

g

e

d

b

a

f

h

j

EX

CE

L® G

rade 8 p

rod

ucts

205

17

18

19

20

CFO

GH

c

i

e

a h

bf

dg

a

e

d

g

bfc

EXCEL® Excavator hook, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Finish : painted yellow (J)

• Certification :: 2.1 2.2 3.1 MPI b

•Note : welding must be done in accordance with DIN 5817 resp. 15429, by a qualified welder according to EN 287-1

working load limit

width length width opening

thickness width length width weight each

ta b c d e f g

kgmm mm mm mm mm mm mm

0.75 59 71 22 14 21 82 20 0.241 72 78 25 19 28 108 26 0.522 92 85 33 20 28 114 34 0.73 105 104 33 26 32 129 34 1.154 121 130 38 27 37 148 38 1.665 138 150 43 28 46 167 44 2.368 145 148 43 42 53 173 51 3.32

10 178 197 60 47 61 225 67 6.4415 185 226 65 62 70 251 80 9.7

INFO

EXCEL® Eye foundry hook, grade 8

•Material : alloy steel, grade 8, quenched and tempered•Safety factor : MBL equals 4 x WLL•Finish : painted yellow (J) or red (R)

• Certification :: 2.1 2.2 3.1 MPI b DGUV

•Note : from 8.2 t without flat part

for chain diameter

working load limit

length diameter eye

inside

width opening

thick-ness

width diameter eye

outside

width outside

length thick-ness

weight each

mm inch ta b c d e f g h i

kgmm mm mm mm mm mm mm mm mm

6 7/32 1.12 93 18 47 17 22 38 97 125 7 0.337-8 1/4 - 5/16 2 124 24 63 22 30 51 129 166 9 0.7810 3/8 3.2 157 33 79 28 36 66 160 208 11 1.513 1/2 5.4 190 44 93 36 46 85 198 256 14 316 5/8 8.2 205 35 95 45 52 88 204 284 24 4.2

18-20 3/4 12.8 235 40 111 53 55 92 228 315 25 7.822 7/8 15.5 265 46 123 66 71 110 258 268 32 9.926 1 21.6 305 54 133 65 81 120 277 420 33 13.832 1 1/4 32.8 327 60 155 84 96 131 333 459 35 24.5

a

e

d

g

bfc