Examples of Packaging Solutions for Inbound Multi ...
Transcript of Examples of Packaging Solutions for Inbound Multi ...
Ericsson Internal DESIGN RULES
1 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
Examples of Packaging Solutions for Inbound Multi packaging for Components
METHOD 1
Product: Not an ESDS. Requires no special protection
PRODUCT PACKAGING = TRANSPORT PACKAGING External: • Pallet with the dimensions 1200 X 800 X H mm (where H is maximum
1200mm) • 1-4 pallet collars or a pallet box Internal: • Separating sheet(s) if several layers of products
Fig. 1
Ericsson Internal DESIGN RULES
2 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
METHOD 2 Product: Not an ESDS. Requires special protection
PRODUCT PACKAGING = TRANSPORT PACKAGING External: • Pallet with the dimensions 1200 X 800 X H mm (where H is maximum
1200mm) • 1-4 pallet collars or a pallet box Internal: • Separating sheet(s) if several layers of products • Compartmental divider or individual wrapping of products.
Fig. 2
Ericsson Internal DESIGN RULES
3 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
METHOD 3 Product: Not an ESDS. Requires packaging with a stable shape PRODUCT PACKAGING External: • Box MULTI-PACKAGING External: • Box.
Fig. 3
Ericsson Internal DESIGN RULES
4 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
METHOD 4 Product: Not an ESDS. Requires environmental protection
PRODUCT PACKAGING External: • Transparent, plastic bag MULTI-PACKAGING External: • Box.
Fig. 4
Ericsson Internal DESIGN RULES
5 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
METHOD 5 Product: Not an ESDS. Requires no special protection PRODUCT PACKAGING External: • Transparent, plastic bag MULTI-PACKAGING External: • Box.
Fig. 5
Ericsson Internal DESIGN RULES
6 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
METHOD 6 Product: Not an ESDS. Requires environmental and physical protection
PRODUCT PACKAGING External: • Transparent, plastic bag MULTI -PACKAGING External: • Box. Internal: • Compartmental divider, box.
Fig. 6
Ericsson Internal DESIGN RULES
7 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
METHOD 7 Product: Not an ESDS. Requires shock-absorbent wrapping PRODUCT PACKAGING External: • Shock-absorbent wrapping MULTI-PACKAGING External: • Box.
Fig. 7
Ericsson Internal DESIGN RULES
8 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
METHOD 8 Product: Not an ESDS. Requires protection against bending / twisting and wear PRODUCT PACKAGING External: • Some kind of wrapping Internal: • Some kind of rigid sheet MULTI-PACKAGING External: • Box.
Fig. 8
Ericsson Internal DESIGN RULES
9 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
METHOD 9 Product: Not an ESDS. Requires protection against bending / twisting and wear PRODUCT PACKAGING External: • Box. Internal: • Separating sheet(s) if several layers of products • Wrapped individually, if required.
Fig. 9
Ericsson Internal DESIGN RULES
10 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
METHOD 10
Product: Not an ESDS. Requires physical protection PRODUCT PACKAGING External: • Box. Internal: • Compartmental divider(s) of some kind • Separating sheet(s) if several layers of compartmental dividers • Padding material in every compartment, if so required, for the support and
protection of the product
Fig. 10
Ericsson Internal DESIGN RULES
11 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
METHOD INSTRUCTION 11 Product: Not an ESDS. Requires protection against corrosion PRODUCT PACKAGING External: • Box. Internal: • Protective paper
Fig. 11
Ericsson Internal DESIGN RULES
12 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
METHOD 12 Product: Not an ESDS. Requires physical protection PRODUCT PACKAGING External: • Box. Internal: • Interleave the products with paper, plastic film, etc.
Fig. 12
Ericsson Internal DESIGN RULES
13 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
METHOD 13 Product: Not an ESDS. Requires physical protection
PRODUCT PACKAGING External: • Box. Internal: • Cardboard tube or plastic tube. • Padding in tube and box to hold product or tube in place.
Fig. 13
Ericsson Internal DESIGN RULES
14 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
METHOD 14 Product: Not an ESDS. Requires protection against corrosion PRODUCT PACKAGING External: • Box. Internal: • VCI-Paper (VCI = Volatile Corrosion Inhibitor)
Fig. 14
Ericsson Internal DESIGN RULES
15 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
METHOD INSTRUCTION 15 Product: Not an ESDS. Requires physical protection
TRANSPORT PACKAGING External: • Pallet with the dimensions 1200 x 800 x H mm. • 1-4 pallet collars or pallet box. • H=Maximum external height incl. pallet = 1200 mm.
Fig. 15
Ericsson Internal DESIGN RULES
16 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
METHOD 16
Product: Not an ESDS. Requires physical protection TRANSPORT PACKAGING External: • Pallet with the dimensions 1200 x 800 x H mm. • Pallet box. • H=Maximum external height incl. pallet = 1200 mm.
Fig. 16
Ericsson Internal DESIGN RULES
17 (17)
Prepared (also subject responsible if other) No.
ERAAJSP 4/102 60-CSX 101 58 Uen Approved Checked Date Rev Reference
EAB/FJB/GB [Andrew Sharp] 2011-12-09 A
METHOD 17 Product: Not an ESDS. Does not require special protection PRODUCT PACKAGING External: • Box. Internal: • Padding material if so required.
Fig. 17