EWIKON Heißkanalsysteme GmbH | EWIKON Heißkanalsysteme … · 2020. 12. 18. · L2X-Mikro valve...
6
High performance hot runner system for small injection moulding machines Direct nozzle heating for more process reliability
Transcript of EWIKON Heißkanalsysteme GmbH | EWIKON Heißkanalsysteme … · 2020. 12. 18. · L2X-Mikro valve...
High performance hot runner system for small injection moulding machinesDirect nozzle heating for more process reliability
2
The solution for smallest shot weights and technical plastics
6-drop hot half with external connections for open gating
4-drop hot half for valve gating
Reliable processing of technical resins Tip inserts with powerful direct heating and separate temperature control for reliable processing of technical resins.
+
L2X connecting technology for precise positioning of the connection cables Minimised space requirement for installation.+
Problem-free processing of thermally sensitive materials Smallmeltvolumeinthesystemduetoshortflowpathlengths.+
Designed for use on BOY®, WITTMANN BATTENFELD or *Babyplast® machines Easytointegratewithextremelycompactsystemdimensions.Availablewithdifferentstandardised nozzle layouts or as complete hot halves in standardised sizes.
+
Leakproof screw connection between nozzles and manifold Simple drop-in installation.+
* Only version for open gating ** Depending on resin
Shot weight per nozzle from 0.01 g**+
3
Valve gating
Open gating
Available as 2-, 4- or 6-drop system, either as ready-to-install unit (manifold with pre-installed nozzles) or as hot half
Manifold dimensions 61 x 48 mm
Compact synchronous plate technology for simultaneous valve pin actuation
Manifold dimensions 59 x 59 mm
Available as complete hot half in 4-drop version
Powerful
All versions feature direct nozzle heating for high thermal performance and reliable processing of technical resins.
4
L2X-Mikro system for open gating
Available nozzle layouts
2-drop axially parallel
2-drop diagonal left
2-drop diagonal right
4-drop 6-drop
Mould size 100 x 75 mm e.g. for Babyplast® injection moulding machines
Mould size 156 x 156 mm e.g. for BOY® injection moulding machines
Available as ready-to-install unit (manifold with pre-installed nozzles) or as hot half in two standardized sizes:
z388
Use in standard mould designs
In order to realize multi-cavity systems with standard moulds, several of the L2X-Mikro manifold modules can be combined with a bridge manifold. In valve gate systems all valve pins are actuated by one common synchronous plate.
16-drop valve gate system 16-drop system for open gating
5
L2X-Mikro system for open gating
Nozzle layout Hot half 156 x 156 mm
Hot half 100 x 75 mm
Manifold with pre-installed nozzles
2-drop axially parallel HM2041 HM1041 22600-41
2-drop diagonal left HM2042 HM1042 22600-42
2-drop diagonal right HM2043 HM1043 22600-43
4-drop HM2044 HM1044 22600-44
6-drop HM2045 HM1045 22600-45
L2X-Mikro valve gate system
Nozzle layout Hot half 156 x 156 mm
4-fach HMNV0104
L2X-Mikro valve gate system
Item numbers
Available as 4-drop hot half with a mould size of 156 x 156 mm
Tech
nica
l inf
orm
atio
n su
bjec
t to
alte
ratio
n.
EW
IKO
N 1
2/20
20 E
N
EWIKON Heißkanalsysteme GmbH Siegener Straße 35 35066 FrankenbergTel: +49 6451 501-0E-Mail: [email protected] www.ewikon.com
Your EWIKON partner:
