Evolution Distribution Boards - IPD Group Limited product attachments/Circuit breaker… ·...
-
Upload
nguyencong -
Category
Documents
-
view
244 -
download
0
Transcript of Evolution Distribution Boards - IPD Group Limited product attachments/Circuit breaker… ·...
Evolution Distribution Boards
Stainless Steel Distribution Boards
Custom Designs
Protection Devices and Accessories
Mild Steel Distribution Boards
Fully welded gutter with machine injected polyurethane gasket provide excellent sealing to keep dust and water out. The seal has been tested for use as a smoke seal.
Large internal space uncluttered by unnecessary brackets or supports allows lots of wiring room and space for cable ducts.
Fully sized gland plates top and bottom for easy cable entry and connection.
Hinged escutcheon with quarter turn locks for quick and safe access.
EVOLUTIONAn essential part of any power supply system, particularly in large commercial and industrial buildings, distribution boards provide a way of safely mounting and connecting of the protective devices for the final sub-circuits of the installation. The Evolution range of distribution boards has been designed to be simple and practical in order to benefit all people involved in the installation - the designers who specify it, the contractors that install it and the end clients that use it.
OVERVIEW
O
IPD INDUSTRIAL PRODUCTS Phone: 1300 556 601 www.ipdgroup.com.au
Removable mouting plate allows equipment to be fitted outside of the board where it is easy to work on, while the shell can be mounted to the wall separately.
Split earth and neutral bars make these connections closer to the matching circuit breakers.The earth and neutral cables don’t have to be run all over the board, and it greatly simplifies connections for outgoing circuits.
RCD test switches now required by large mine operators are a standard accessory.
Wide choice of locking options to meet the specific requirements of the installation site.
Flexible chassis mounting system allows wide choice of poles including split for separate light and power metering.
Prewired circuits for external lighting control and emergency lighting simplifies ordering a fully functional solution.
IPD INDUSTRIAL PRODUCTS Phone: 1300 556 601 www.ipdgroup.com.au
DO YOU NEED A CUSTOM SOLUTION?
←Our in house workshop can assemble a DB to your exact requirements.Contact your local IPD sales representative for more information.
IPD INDUSTRIAL PRODUCTS Phone: 1300 556 601 www.ipdgroup.com.au
The number of outgoing circuits determines the number of poles. Standard or RCD protected single phase circuits will need 1 pole each. Three phase circuits will need 3 poles each for standard circuits or 5 - 6 poles each for RCD protected circuits. Add up the number of required poles, including spare poles for future expansion, and round up to the nearest whole dozen to determine the size of the board. All Evolution ranges are available in sizes from 12 - 96 poles.
How many circuits are there?←
How would the board be isolated if an electrical contractor needed to modify it, such as adding a circuit? If the board can be isolated at a nearby location like a main board, then a main switch may not be required. Whether a main switch is required may also be determined by the state orsupply authority wiring rules. All Evolution ranges are available as standard with no main switch, a 250A switch disconnector, or a moulded case circuit breaker. Other options are available.
Is a main switch required?←
Application Recommend Solution In an electrical cupboard or switchroom Evolution E43 Inside on a wall Evolution E43; may require optional lock accessory and flush surround Inside in a dirty or wet environment like a factory Evolution E65 Outside undercover out of the weather Evolution E65; may require optionl rain hood Outside with no protection from the weather Evolution E66 Stainless Steel In a corrosive environment like a chemical factory or near the ocean in a salty atmosphere Evolution E66 Stainless Steel Where washdown is required like a food processing plant Evolution E66 Stainless Steel
The installation position of a distribution board will determine what level of dust and waterproofing is required, as well as what material is it is made from and if any mounting accessories are required.
Where will it be installed?←
HOW TO CHOOSE A SOLUTION THAT IS RIgHT FOR YOU:
IPD INDUSTRIAL PRODUCTS Phone: 1300 556 601 www.ipdgroup.com.au
The Evolution Range is available in the following colours;- RAL7032 Grey or RAL2000 Orange for Evolution E43 and Evolution E65.- Unpainted for Evolution E66 Stainless Steel.All ranges can be optionally resprayed into any colour. Specify the RAL colour required at the time of ordering.
What colour?←
Evolution E43 Evolution E65 Evolution E66
MECHANICAL CHARACTERISTICS
IP Rating IP43 IP65 IP66
Height 400 - 1200mm 400 - 1200mm 400 - 1200mm
Width 600mm 600mm 600mm
Depth 200mm 200mm 200mm
Material 1.0 & 1.2mm 1.5mm 1.5mm
Mild Steel Mild Steel 316 Stainless Steel
Colour RAL7032 Grey RAL7032 Grey or
or RAL2000 Orange RAL2000 Orange Unpainted
Optional Colours O Specify RAL O Specify RAL O Specify RAL
Hinged Escutcheon
Reversible Escutcheon LHS to RHS
Reversible Door LHS to RHS
Full Size gland Plate Top and Bottom -
Flush Surround Option O O -
Rain Hood Option O O O
Brass or Aluminium gland Plates O O O Factory Fitted
Floor Mounting Plinth O O O Factory Fitted
ELECTRICAL CHARACTERISTICS
Poles 12 - 96 12 - 96 12 - 96
Load Break Main Switch Rating 250A 250A 250A
80 - 250A MCCB Main Switch
250 - 630A MCCB Main Switch O With Separate O With Separate O With Separate
Header Box Header Box Header Box
Standard Chassis Current Rating 250A 250A 250A
Optional Current Rating 350A, 400A with 350A, 400A with 350A, 400A with
Diminishing Loads Diminishing Loads Diminishing Loads
Standard Chassis Withstand Rating 20kA / 0.1s 20kA / 0.1s 20kA / 0.1s
Optional Withstand Rating 25kA / 0.1s 25kA / 0.1s 25kA / 0.1s
Split Chassis Option O O O
Dual Odds & Evens Neutral Bars
Earth and Neutral Bars Dimensions 10 x 20mm 10 x 20mm 10 x 20mm
Earth and Neutral Bars Rating 330A 330A 330A
Earth and Neutral Bars Terminals 6mm (16mm2 conductor), 6mm (16mm2 conductor), 6mm (16mm2 conductor),
double screw double screw double screw
LOCkINg AND SEALINg
Three Locking Positions
Three Point Locking Rods O O -
Machine Injected Polyurethane Seal
Seal tested as Smoke Seal
Note:O = Option
Selection Data:
IPD INDUSTRIAL PRODUCTS Phone: 1300 556 601 www.ipdgroup.com.au
Accessories:
ELTS4Emergency Lighting
DgMTTCI275Surge Protection
ELCk-DPExternal Lighting
DIRIS A10Metering
Colour Poles Height Width Depth Part No. E43 24 600 600 200 E43g24J250 36 800 600 200 E43g36J250 48 800 600 200 E43g48J250 60 1000 600 200 E43g60J250 7 2 1000 600 200 E43g72J250 24 600 600 200 E43A24J250 36 800 600 200 E43A36J250 48 800 600 200 E43A48J250 60 1000 600 200 E43A60J250 72 1000 600 200 E43A72J250
Colour Poles Height Width Depth Part No. E65 Grey 24 600 600 200 E65g24J250 36 800 600 200 E65g36J250 48 800 600 200 E65g48J250 60 1000 600 200 E65g60J250 72 1000 600 200 E65g72J250 Orange 24 600 600 200 E65A24J250 36 800 600 200 E65A36J250 48 800 600 200 E65A48J250 60 1000 600 200 E65A60J250 72 1000 600 200 E65A72J250
Colour Poles Height Width Depth Part No. E66 24 600 600 200 E66g24J250 36 800 600 200 E66g36J250 48 800 600 200 E66g36J250
For Indoor applications
such as electrical
cupboards or
switchrooms
Grey
Orange
For wet and dusty
applications Grey
Orange
For exposed outdoor
or harsh environments
Only the most commonly used items shown above.For a complete list of the full offer, please refer to the EvOLUTIOn technical catalogue on our website.
IPD INDUSTRIAL PRODUCTS Phone: 1300 556 601 www.ipdgroup.com.au
Other distribution and switchboard solutions available from IPD:
Loadcentres Enclosures Main SwitchboardsMetering Boards
Solutions for Switchboard Builders
Part No. 1P Circuit Breakers 10A Dg61C10 16A Dg61C16 20A Dg61C20 3P Circuit Breakers 10A Dg63C10 16A Dg63C16 20A Dg63C20 1P Combined MCB/RCD 10A DDICE60C10/030 16A DDICE60C16/030 20A DDICE60C20/030
1P Circuit Breakers 10A g61C10 16A g61C16 20A g61C20 3P Circuit Breakers 10A g63C10 16A g63C16 20A g63C20 1P Combined MCB/RCD 10A DME60C10/030 16A DME60C16/030 20A DME60C20/030 3P RCD (Use with G63 MCB) DkT93N32/030/115
1P Circuit Breakers 10A g101C10 16A g101C16 20A g101C20 3P Circuit Breakers 10A g103C10 16A g103C16 20A g103C20 1P Combined MCB/RCD 10A DMEH100C10/030 16A DMEH100C16/030 20A DMEH100C20/030 3P RCD (Use with G103 MCB) DkT93N32/030/115
6kA for Residential
and Light Commercial
applications
6kA for standard
Commercial
applications
10kA for large
Commercial
and industrial
applications
Only the most commonly used items shown above.For a complete list of the full offer, please refer to the IPD product catalogue.
National Customer Support CentreTel: 1300 556 601 Fax: 1300 550 187
Email: [email protected]
BRISBAnE
nEWCASTLE
SYDnEY
HOBART
ADELAIDE
MELBOURnE
PERTH
AUCKLAnD
GLADSTOnE
DARWIn
QR CodeScan the code above witha smartphone to view the
full IPD product range