EVB-USB2240-IND User’s Manual, Rev...

2014 Microchip Technology Inc. DS50002298B

EVB-USB2240-INDUser’s Manual, Rev C

DS50002298B-page 2 2014 Microchip Technology Inc.

Information contained in this publication regarding deviceapplications and the like is provided only for your convenienceand may be superseded by updates. It is your responsibility toensure that your application meets with your specifications.MICROCHIP MAKES NO REPRESENTATIONS ORWARRANTIES OF ANY KIND WHETHER EXPRESS ORIMPLIED, WRITTEN OR ORAL, STATUTORY OROTHERWISE, RELATED TO THE INFORMATION,INCLUDING BUT NOT LIMITED TO ITS CONDITION,QUALITY, PERFORMANCE, MERCHANTABILITY ORFITNESS FOR PURPOSE. Microchip disclaims all liabilityarising from this information and its use. Use of Microchipdevices in life support and/or safety applications is entirely atthe buyer’s risk, and the buyer agrees to defend, indemnify andhold harmless Microchip from any and all damages, claims,suits, or expenses resulting from such use. No licenses areconveyed, implicitly or otherwise, under any Microchipintellectual property rights.

Note the following details of the code protection feature on Microchip devices:

• Microchip products meet the specification contained in their particular Microchip Data Sheet.

• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions.

• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

• Microchip is willing to work with the customer who is concerned about the integrity of their code.

• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of ourproducts. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such actsallow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified.

QUALITYMANAGEMENTSYSTEMCERTIFIEDBYDNV

== ISO/TS16949==

Trademarks

The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, flexPWR, JukeBlox, KEELOQ, KEELOQ logo, Kleer, LANCheck, MediaLB, MOST, MOST logo, MPLAB, OptoLyzer, PIC, PICSTART, PIC32 logo, RightTouch, SpyNIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.

The Embedded Control Solutions Company and mTouch are registered trademarks of Microchip Technology Incorporated in the U.S.A.

Analog-for-the-Digital Age, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, ECAN, In-Circuit Serial Programming, ICSP, Inter-Chip Connectivity, KleerNet, KleerNet logo, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, RightTouch logo, REAL ICE, SQI, Serial Quad I/O, Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.

SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.

Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries.

GestIC is a registered trademarks of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other countries.

All other trademarks mentioned herein are property of their respective companies.

© 2014, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved.

ISBN: 978-1-63276-459-1

EVB-USB2240-IND Evaluation Board User’s Guide

Object of Declaration: EVB-USB2240-IND

2014 Microchip Technology Inc. DS50002298B-page 3


NOTES:


EVB-USB2240-INDEVALUATION BOARD

USER’S GUIDE

Table of Contents

Preface ........................................................................................................................... 7Introduction............................................................................................................ 7

Document Layout .................................................................................................. 7

Conventions Used in this Guide ............................................................................ 8

The Microchip Web Site ........................................................................................ 9

Development Systems Customer Change Notification Service ............................ 9

Customer Support ................................................................................................. 9

Document Revision History ................................................................................. 10

Chapter 1. Overview1.1 Introduction ................................................................................................... 111.2 Features ....................................................................................................... 111.3 General Description ...................................................................................... 11

Chapter 2. Getting Started2.1 Hardware ...................................................................................................... 15

2.1.1 Configuration ................................................................................. 152.1.2 Powered State LED ....................................................................... 152.1.3 Activity LED ................................................................................... 152.1.4 Media Interface .............................................................................. 152.1.5 Connector Description ................................................................... 162.1.6 Power source - Self/Bus Powered ................................................. 162.1.7 Configuration source - USB Upstream .......................................... 162.1.8 Layout Considerations ................................................................... 16

Chapter 3. Appendix A. EVB-USB2240-IND Evaluation BoardA.1 Introduction .................................................................................................. 19

Appendix B. EVB-USB2240-IND Evaluation Board SchematicsB.1 Introduction .................................................................................................. 21

Appendix C. Bill of Materials (BOM)C.1 Introduction .................................................................................................. 23

Worldwide Sales and Service .................................................................................... 27



NOTES:



USER’S GUIDE

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using the EVB-USB2240-IND. Items discussed in this chapter include:

• Document Layout

• Conventions Used in this Guide

• The Microchip Web Site

• Development Systems Customer Change Notification Service

• Customer Support

• Document Revision History

DOCUMENT LAYOUT

This document describes how to use the EVB-USB2240-IND Evaluation Board as a development tool for the USB2240 Ultra Fast USB 2.0 Flash Media Controller. The manual layout is as follows:

• Chapter 1. “Overview” – Shows a brief description of the EVB-USB2240-IND Evaluation Board.

• Chapter 2. “Getting Started” – Includes instructions on how to get started with the EVB-USB2240-IND Evaluation Board.

• Appendix A. “EVB-USB2240-IND Evaluation Board” – This appendix shows the EVB-USB2240-IND Evaluation Board.

• Appendix B. “EVB-USB2240-IND Evaluation Board Schematics” – This appendix shows the EVB-USB2240-IND Evaluation Board schematics.

• Appendix C. “Bill of Materials (BOM)” – This appendix includes the EVB-USB2240-IND Evaluation Board Bill of Materials (BOM).

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and documentation are constantly evolving to meet customer needs, so some actual dialogs and/or tool descriptions may differ from those in this document. Please refer to our web site (www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each page, in front of the page number. The numbering convention for the DS number is “DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the document.

For the most up-to-date information on development tools, see the MPLAB® IDE online help. Select the Help menu, and then Topics to open a list of available online help files.



CONVENTIONS USED IN THIS GUIDE

This manual uses the following documentation conventions:

DOCUMENTATION CONVENTIONS

Description Represents Examples

Arial font:

Italic characters Referenced books MPLAB® IDE User’s Guide

Emphasized text ...is the only compiler...

Initial caps A window the Output window

A dialog the Settings dialog

A menu selection select Enable Programmer

Quotes A field name in a window or dialog

“Save project before build”

Underlined, italic text with right angle bracket

A menu path File>Save

Bold characters A dialog button Click OK

A tab Click the Power tab

N‘Rnnnn A number in verilog format, where N is the total number of digits, R is the radix and n is a digit.

4‘b0010, 2‘hF1

Text in angle brackets < > A key on the keyboard Press <Enter>, <F1>

Courier New font:

Plain Courier New Sample source code #define START

Filenames autoexec.bat

File paths c:\mcc18\h

Keywords _asm, _endasm, static

Command-line options -Opa+, -Opa-

Bit values 0, 1

Constants 0xFF, ‘A’

Italic Courier New A variable argument file.o, where file can be any valid filename

Square brackets [ ] Optional arguments mcc18 [options] file [options]

Curly brackets and pipe character: { | }

Choice of mutually exclusive arguments; an OR selection

errorlevel {0|1}

Ellipses... Replaces repeated text var_name [, var_name...]

Represents code supplied by user

void main (void){ ...}


Preface

THE MICROCHIP WEB SITE

Microchip provides online support via our web site at www.microchip.com. This web site is used as a means to make files and information easily available to customers. Accessible by using your favorite Internet browser, the web site contains the following information:

• Product Support – Data sheets and errata, application notes and sample programs, design resources, user’s guides and hardware support documents, latest software releases and archived software

• General Technical Support – Frequently Asked Questions (FAQs), technical support requests, online discussion groups, Microchip consultant program member listing

• Business of Microchip – Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives

DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE

Microchip’s customer notification service helps keep customers current on Microchip products. Subscribers will receive e-mail notification whenever there are changes, updates, revisions or errata related to a specified product family or development tool of interest.

To register, access the Microchip web site at www.microchip.com, click on Customer Change Notification and follow the registration instructions.

The Development Systems product group categories are:• Compilers – The latest information on Microchip C compilers, assemblers, linkers

and other language tools. These include all MPLAB C compilers; all MPLAB assemblers (including MPASM assembler); all MPLAB linkers (including MPLINK object linker); and all MPLAB librarians (including MPLIB object librarian).

• Emulators – The latest information on Microchip in-circuit emulators.This includes the MPLAB REAL ICE and MPLAB ICE 2000 in-circuit emulators.

• In-Circuit Debuggers – The latest information on the Microchip in-circuit debuggers. This includes MPLAB ICD 3 in-circuit debuggers and PICkit 3 debug express.

• MPLAB IDE – The latest information on Microchip MPLAB IDE, the Windows Integrated Development Environment for development systems tools. This list is focused on the MPLAB IDE, MPLAB IDE Project Manager, MPLAB Editor and MPLAB SIM simulator, as well as general editing and debugging features.

• Programmers – The latest information on Microchip programmers. These include production programmers such as MPLAB REAL ICE in-circuit emulator, MPLAB ICD 3 in-circuit debugger and MPLAB PM3 device programmers. Also included are nonproduction development programmers such as PICSTART Plus and PIC-kit 2 and 3.

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels:

• Distributor or Representative

• Local Sales Office

• Field Application Engineer (FAE)

• Technical Support


www.microchip.com

http://www.microchip.com


Customers should contact their distributor, representative or field application engineer (FAE) for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document.

Technical support is available through the web site at: http://www.microchip.com/support

DOCUMENT REVISION HISTORY

Revision A (July 2014)

• Initial Release of this Document.

Revision B (September 2014)

• Update to Section 1.2 “Features”


http://www.microchip.com/support

http://www.microchip.com/support


USER’S GUIDE

Chapter 1. Overview

1.1 INTRODUCTION

The EVB-USB2240-IND is an Ultra Fast USB 2.0 Multi-Slot Flash Media Controller with Secure Digital (SD), MultiMediaCardTM (MMC), Memory Stick® (MS), and xD-Picture CardTM (xD) connectors. The EVB-USB2240-IND demonstrates a standalone applica-tion for developers of the following applications: Flash Media Card Reader/Writer, print-ers, desktop and mobile PCs, consumer A/V, and flat panel displays, among others.

1.2 FEATURES

The EVB-USB2240-IND provides the following features:

• 36-Pin QFN (RoHS compliant) package.

• Supports these Media Types on Media I/F:

- Secure Digital (SD2.0, HS-SD, HC-SD)

- MultiMediaCardTM 4.2

- xD-Picture CardTM (population deprecated on modern assemblies)

- Memory Stick® 1.43

- High Speed Memory StickTM

- Memory Stick Pro-HGTM

- Memory Stick Duo Memory Stick ProTM

• Internal FET power switch for all media types; no external power FETs needed.

• Optionally supports external configuration.

- External I2C EEPROM for configuration options (optional).

• Low cost 4-Layer space saving design.

• Self-powered or bus-powered operation.

• Operates from a single voltage (+5.0 VDC, regulated) external power supply or from VBUS.

• Single onboard +3.3 VDC regulator.

• Optional +3.3 VDC media power LED indicator.

• Activity LED indicator.

• Single crystal clock source.

1.3 GENERAL DESCRIPTION

The EVB-USB2240-IND is an evaluation and demonstration platform featuring the USB2240 Ultra Fast USB 2.0 Flash Media Controller on a 4-layer RoHS compliant printed circuit board.

The EVB-USB2240-IND is designed to demonstrate the unique features of this device using a low-cost PCB implementation. It is designed to support internal default config-uration settings and an external I2C EEPROM (optional) for customized configured functionality. When an I2C EEPROM device is populated on the evaluation board it pro-vides customizing via USB by using the Microchip-provided USBDM utility, as required.



The EVB-USB2240-IND is compatible with the following:

• Microsoft® Vista

• Windows® XP

• Windows® ME

• Windows® 2k SP4

• Apple® OS X

• Linux® Mass Storage Class Drivers.

Schematics, Layout, and Bill of Materials are included minimizing new product devel-opment time.

FIGURE 1-1: TOP LEVEL SILK SCREEN AND COPPER LAYER


FIGURE 1-2: BOTTOM LEVEL SOLDIER SIDE AND COPPER LAYER



NOTES:



USER’S GUIDE

Chapter 2. Getting Started

2.1 HARDWARE CONFIGURATION

The EVB-USB2240-IND has one onboard regulator, which generates +3.3 VDC from an external +5 VDC regulated power supply. The USB2240 generates its own +1.8 VDC for internal use using on-chip +1.8 VDC regulators. The internal 1.8 Volt regulator to the oscillator and PLL is turned off during suspend to minimize suspend current. The USB2240 consumes power from the 3.3 Volt supply.

2.1.1 Configuration

Default: The EVB-USB2240-IND has been set up to support internal default configu-ration as determined by the empty state (no valid signature ID) of the EEPROM imme-diately after reset. When no valid EEPROM image is detected, the Vendor ID, Product ID, Language ID, and Device ID, and a few other choices are set using ROM code defaults.

EEPROM Option: The EVB-USB2240-IND can load configuration from an external two-wire, I2C EEPROM U2. The EEPROM must be installed in socket U2. The EEPROM may be pre-programmed before installation, or it can be programmed with the USB host using the provided Microchip USBDM application.

This option allows access to all of the configuration registers and ID strings for the USB2240 device for detailed functional analysis and exercise as desired. The EVB-USB2240-IND is compatible with I2C EEPROMs from several manufacturers. The memory capacity must be at least 512 bytes.

2.1.2 Powered State LED

An optional LED, LED1, indicates when +3.3 VDC power is present on the media sock-ets.

2.1.3 Activity LED

LED3 indicates when the USB2240 is active, as defined by firmware.

2.1.4 Media Interface

The USB2240 supports a wide array of devices. Media Interface accommodates all of the media types supported through the use of three media socket connectors. Adapters may be needed for some form factors.

• J1 supports SD media up to the specification limit of 4 bits wide. It also supports MMC media up to the specification 4.2 of 8 bits wide.

• J2 supports xD-Picture Card media.

• J3 supports MS, MS Pro, MS Duo, and MS Pro-HG media at up to the specifica-tion limit of 8 bits wide.

Since these connectors are all on the same media bus, only one device is allowed to be inserted into any of these media socket connectors at one time for the Media Inter-face.



2.1.5 Connector Description

The EVB-USB2240-IND has a standard USB style connector of type B for the upstream port. It also has a standard set of media storage style connectors, which supports pop-ular flash media formats from the xD, MS, SD, and MMC families. Power is supplied via a 2.0 mm power jack. Table 2.1 lists all of the connectors. For more details on the pinout of the connectors please schematics in Figure B-1.

2.1.6 Power source - Self/Bus Powered

The EVB-USB2240-IND supports both self and bus powered operation. By default the EVB-USB2240-IND is populated for bus powered operation. Refer to the table Table 2.2 below for resistor population options to change the power source.

2.1.7 Configuration source - USB Upstream

The Microchip configuration tool named USBDM, see USB2240 Software Release Notes for details (https://www2.smsc.com/mkt/CW_SFT_PUB.nsf/Agree-ments/OBJ+Card+Reader), can configure the EEPROM when it is populated. USBDM can modify Vendor ID, Product ID, Language ID, Device ID, and configuration settings, see Figure 2.1.

2.1.8 Layout Considerations

The EVB-USB2240-IND is designed on four PCB layers: two signal layers and two sup-ply layers. The PCB layer stack is shown in Table 2.3. All signals are routed on top and bottom layers. The internal layers are ground and power. Note that the media I/F sig-nals flow easily to their destination connectors simplifying routing of critical signals.

TABLE 2-1: CONNECTOR DESCRIPTION

CONNECTOR TYPE DESCRIPTION

J1 SD/MMC4.0 SD/MMC I/F

J2 xD xD I/F

J3 MS/MS Duo/MS Pro-HG MS I/F

J5 Header GPIO Test - DNP

J6 Power Jack 2.0 mm +5 VDC Power Supply - DNP

J7 USB 2.0 Style B Upstream Port

J1 SD/MMC4.0 SD/MMC I/F

TABLE 2-2: POPULATION OPTIONS FOR SELF OR BUS POWERED OPERATION

POWER SOURCE R14 R16

Bus Powered (Default) Populate DNP

Self Powered DNP Populate

Note: DNP = Do not populate.


The component side top layer is shown in Figure 1-1 with silk screen information to identify component locations. Solder side and bottom layer is shown in Figure 1-2.

TABLE 2-3: PCB LAYER STACKLayer 1

Component Side1.3 - 2.3 oz. Cu finished wt.

40 mil (+/- 6 mil)

4.0 - 4.5 mil FR-4

Layer 2Ground Plane

1 oz. nominal Cu wt.

Core ~25 mil FR-4

Layer 3Power Plane

1 oz. nominal Cu wt.

4.0 - 4.5 mil FR-4

Layer 4Solder Side

1.3 - 2.3 oz Cu finished wt.



NOTES:



USER’S GUIDE

Appendix A. EVB-USB2240-IND Evaluation Board

A.1 INTRODUCTION

This appendix shows the EVB-USB2240-IND Evaluation Board.

FIGURE A-1: EVB-USB2240-IND EVALUATION BOARD


NOTES:



USER’S GUIDE

Appendix B. EVB-USB2240-IND Evaluation Board Schematics

B.1 INTRODUCTION

This appendix shows the EVB-USB2240-IND Evaluation Board Schematics.


EV

B-U

SB

2240-IND

Evalu

ation

Bo

ard U

ser’s Gu

ide

DS

50002298B

-page 22

2014 M

icrochip Technolo

gy Inc.

(SM_D0)(SM_D1)(SM_D2)(SM_D3)(SM_D4)(SM_D5)(SM_D6)(SM_D7)

(SM_ALE)(SM_CLE)

(SM_nWP)

(SD_WP)

(MS_D2)

(MS_D5)

(MS_D3)

(MS_D7)(MS_D6)

(MS_D4)

(MS_SCLK)

(MS_D1)

(MS_BS)

(MS_D0)

(SD_WP)

(SD_CLK)

(SD_DAT0)(SD_DAT1)(SD_DAT2)(SD_DAT3)

(SD_DAT4)(SD_DAT5)(SD_DAT6)(SD_DAT7)

(SD_CMD)

(SM_nCD)

Optional EMI Via Bypass Capacitors -- DNP

Optional EMI Field Capacitors -- DNP

Populate ONLY for special high-current media devices.

"Card Power"

OptionalOptional

GPIO6<SD_WP>/MS_CLK/SM_D4

MS_INS

_nWE_nRE

_nCE

SD_nCD

XD_CRDPWR

SM_nBR

GPIO14

CRD_PWR2

CRD_PWR2

CRD_PWR2

3V3

3V3

C70.1uFC70.1uF

XDJ2

XDJ2

VCC18

D010

D111

D212

D313

D414

D515

D616

D717

ALE6

CLE5

RE3

WE7

WP8

CE4

CD0early19

CD120

GND/CDlate1

B/R2

GND9

SHLD222SHLD121

nc123

nc224

R72.2KR72.2K

C33

0.1uF

C33

0.1uF

C1

0.1uF

C1

0.1uF

C35

0.1uF

C35

0.1uF

LED1

Bright_GRN

LED1

Bright_GRN

+ C947uFDNP

+ C947uFDNP

C23

0.001uF

C23

0.001uF

C84.7uFC84.7uF

R4 1KR4 1K

C30

0.1uF

C30

0.1uF

TP17p5x6mmTP17p5x6mm

C29

0.1uF

C29

0.1uF

C37

0.1uF

C37

0.1uF

C24

0.001uF

C24

0.001uF

tp1DNPtp1DNP

C32

0.1uF

C32

0.1uF

SD/MMC4.0Normal Mount

(Proconn)

J1

SD/MMC4.0Normal Mount

(Proconn)

J1

VCC4

D07

D18

D29

D31

CLK5

CMD2

GND13

GND26

SD_WP15DET14

SwGND318

SwGND419

D410

D612

D713

D511

SwGND116

SwGND217

nc120

nc221

Classic, Duo, ProHGMS Normal Mount

J3

Classic, Duo, ProHGMS Normal Mount

J3

VCC9D0/SDIO

4

D13

D25

D37

SCLK8

BS2

INS6

GND1

GND10

D412

D511

D613

D714

SHLD216SHLD115

nc117

nc218

C34

0.1uF

C34

0.1uF

C39

0.001uF

C39

0.001uF

C41

0.001uF

C41

0.001uF

C40

0.001uF

C40

0.001uF

C31

0.1uF

C31

0.1uF

C38

0.1uF

C38

0.1uF

C22

0.001uF

C22

0.001uF

FIGURE B-1: EVB-USB2240-IND EVALUATION BOARD SCHEMATIC 1

Do Not Populate.Development configuration ONLY

"Backlight"

"Activity"

(SCL)(SDA)

Optional EEPROM

(xD_nCD/xD_nID)

(SM_nCD)

MS-8-bit

Upstream USB ESD/EMI Treatments -- DNP

Self-Power Option -- DNP(De-pop R14 for Self-Power)

Internal Regulator Optional Capacitors -- DNP

Test Points -- DNP

Optional Signal EMI Capacitors -- DNP

Series termination onlyrequired if impedancemis-matches from driversto line cause SI or EMIissues.

VBUS

XTAL2

VDD18PLL

RBIAS

GPIO7


SM_nBR

SD_CMD/MS_D0/SM_CLE

SD_CLK/MS_BS/SM_nWP_R

GPIO6<SD_WP>/MS_CLK/SM_D4_R

BL_K

XTAL1

VDD18

MS_INS

SD_nCD

GPIO14

SMSM_nWESMSM_nRE

SMSM_nCE

SD_D6/MS_D7/SM_D0SD_D7/MS_D6/SM_D1SD_D0/MS_D4/SM_D2SD_D1/MS_D5/SM_D3

SD_D2/SM_D5SD_D3/MS_D3/SM_D6<Atest>SD_D4/MS_D2/SM_D7

SD_D5/MS_D1/SM_ALE

GPIO4

SD_D6/MS_D7/SM_D0_R

SD_D0/MS_D4/SM_D2_RSD_D1/MS_D5/SM_D3_R

SD_D7/MS_D6/SM_D1_R

<Atest>SD_D4/MS_D2/SM_D7_R

SD_D2/SM_D5_RSD_D3/MS_D3/SM_D6_R

SM_nRE_RSD_CMD/MS_D0/SM_CLE_RSD_D5/MS_D1/SM_ALE_R

SM_nWE_R

SM_nCE_R

SM_nBR_R

GPIO2_R

GPIO14_R

SD_nCD_R

MS_INS_R

LED1 LED1_R

USBDP

USBDM USBDM

USBDPUSBDP

USBDM

5V_EXT 5V

nRESET

VDD18PLL VDD18

LED1_R

GPIO7_R

GPIO2GPIO7

SD_CLK/MS_BS/SM_nWP

CRD_PWR2


SD_CMD/MS_D0/SM_CLE

SD_CLK/MS_BS/SM_nWP

5V_USB 5V

5V_USB

CRD_PWR2

GPIO2

USBDPUSBDM USBDM

USBDP

3V3

3V3

3V3

3V3

3V3

3V3

3V3

3V3

3V3

LED2ORANGE

LED2ORANGE

C10

0.1uF

C10

0.1uF

C21

10uF

C21

10uF

tp13DNPtp13DNP

RT17 33RT17 33

tp16tp16

R20 1KR20 1K

C20 0.1uFC20 0.1uF

C19

18pF

C19

18pF

J6

SelfPwr

J6

SelfPwr

1

2

3

C17

0.1uF

C17

0.1uF

C454.7pFC454.7pF

RT12 33RT12 33

tp14tp14

C46

0.1uFEMI

C46

0.1uFEMI

R1810KR1810K

RT10 33RT10 33

C28

0.1uF

C28

0.1uF

C5

0.1uF

C5

0.1uF

RT8 33RT8 33

C4

0.1uF

C4

0.1uF

RT3 33RT3 33

RT6 33RT6 33

RT2 33RT2 33

FB2 2A/0.05DCREMI

FB2 2A/0.05DCREMI

U3MIC37100-3.3WS_SOT223-3U3MIC37100-3.3WS_SOT223-3

GND

2

VIN1

3.3V_OUT3

LED3

Bright_GRN

LED3

Bright_GRN

RT15 ZeroRT15 Zero

C14

18pF

C14

18pF

R3 10KR3 10K

RT20 ZeroRT20 Zero

C26

0.001uF

C26

0.001uF

C2

0.1uF

C2

0.1uF

RT21 ZeroRT21 Zero

tp15tp15

RT22 ZeroRT22 Zero

tp12DNPtp12DNP

RT1 33RT1 33

R21 10KR21 10K

C18

1.0uFSelfPwr

C18

1.0uFSelfPwr

C25

0.001uF

C25

0.001uF

RT18 33RT18 33

BR1BGX50A

EMIBR1BGX50A

EMI

31

24

R151MegR151Meg

U2 24C04-DFN8DNP

U2 24C04-DFN8DNP

A01

A12

A23

WP7

SCL6

SDA5

VCC8

GND4

flag9

L1

DLP11SN900SL2

EMIL1

DLP11SN900SL2

EMI1 2

34

R5 33R5 33

C44 4.7pFC44 4.7pF

C11

1.0uF

C11

1.0uF

R14 ZEROBusPwr

R14 ZEROBusPwr

R13100KR13100K

tp10tp10

RT13 33RT13 33

C424.7pFC424.7pF

USB

_B-R

ECR

A-TH

RU

J7

USB

_B-R

ECR

A-TH

RU

J7

VCC1

D-2D+3

GND4

SH15

SH26

FB12A/0.05DCR

FB12A/0.05DCR

RT11 33RT11 33

C12

0.1uF

C12

0.1uF

tp8DNPtp8DNP

C434.7pFC434.7pF

R17 470R17 470

R12 33R12 33

RT9 33RT9 33

R16 ZEROSelfPwr

R16 ZEROSelfPwr

RT7 33RT7 33

R11

100K

R11

100K

Y124.000MHz

Y124.000MHz

tp11tp11

C6

0.1uF

C6

0.1uF

RT5 33RT5 33RT4 33RT4 33

C36

0.1uF

C36

0.1uF

RT14 ZeroRT14 Zero

USB

Miscellaneous

Power Card I/F

GPIO

U1 USB2240 QFN36B

USB

Miscellaneous

Power Card I/F

GPIO

U1 USB2240 QFN36B

USBDP2

USBDM3

RESET18

TEST28

XTAL232

XTAL133

VDD18PLL34

VDD18/VDDCR13

VDD336

VDD3322

VDD33/VDDCRREF14

VDDA33/VDDPLLREF36

VSS(FLAG)37

RBIAS35

<TDO>(LED1)GPIO11

(RXD)GPIO227

<TCK>(XD_ID) GPIO429

(TXD)GPIO731

(CRD_PWR2)GPIO1021

<TDI>(MS_INS) GPIO1224

<TMS>(SM_nCD) GPIO1419

<TRST>(SD_nCD) GPIO1526

SD_D6/MS_D7/SM_D08

SD_D7/MS_D6/SM_D17

SD_D0/MS_D4/SM_D25

SD_D1/MS_D5/SM_D34

GPIO6(SD_WP)/MS_CLK/SM_D430

SD_D2/SM_D525

SD_D3/MS_D3/SM_D623

<Atest>SD_D4/MS_D2/SM_D720

SD_D5/MS_D1/SM_ALE10

SD_CMD/MS_D0/SM_CLE11

SM_RE16

SM_WE12

SD_CLK/MS_BS/SM_WP9

SM_CE15

SM_B/R17

C16

1.0uF

C16

1.0uF

C13

0.1uF

C13

0.1uF

R10 12.0K1%R10 12.0K1%

J5J5

1234

C15

1.0uF

C15

1.0uF tp9DNPtp9DNP

C27

4.7uF

C27

4.7uF

R19 330R19 330 RT19 33RT19 33

C3

1.0uF

C3

1.0uF


USER’S GUIDE

Appendix C. Bill of Materials (BOM)

C.1 INTRODUCTION

This appendix includes the EVB-USB2240-IND Evaluation Board Bill of Materials (BOM).


EV

B-U

SB

2240-IND

Evalu

ation

Bo

ard U

ser’s Gu

ide

DS

50002298B

-page 24

2014 M

icrochip Technolo

gy Inc.

Manufacturer Part Number Notes

GRM155R71A104KA01D

GRM1555C1H180JZ01D Critical Device

GRM188R60J106ME47D

GRM188R61C105KA93D

GRM188R60J475KE19D

BLM18EG221SN1D

SDC013-A0-5002

XDC020-A0-0000

MSCN14-X0-2200

61729-x0xxBLF

SML-412MWT86

SML-412MWT86

ERJ-3EKF1202V Critical Device

ERJ-3GEYJ104V

ERJ-3GEY0R00V

ERJ-3GEYJ105V

ERJ-3GEYJ331V

ERJ-3GEYJ103V

ERJ-3GEYJ222V

ERJ-3GEYJ222V

MCR006YZPJ330

MCR006YZPJ000

3200218

USB2240-AEZG

MIC37100-3.3WS

HCM49-24.000MABJ-UT

TABLE C-1: EVB-USB2240-IND EVALUATION BOARD BILL OF MATERIALS

Item QtyQty

PopulatedReference Designator(s) Description Manufacturer

1 9 9 C1,C4,C5,C6,C7,C12,C13,C17,C20

Capacitor, 0.1uF, 6.3V, 10%, X5R, 0402 Murata

2 2 2 C14,C19 Capacitor, 18pF, 50V, 5%, NPO, 0402 Murata

3 1 1 C21 Capacitor, 10uF, 6.3VDC, 20%, X5R, 0603 Murata

4 4 4 C3,C11,C15,C16 Capacitor, 1.0uF, 16VDC, 10%, X5R, 0603 Murata

5 2 2 C8,C27 Capacitor, 4.7uF, 6.3VDC, 20%, X5R, 0603 Murata

6 1 1 FB1 Ferrite Bead, 220 Ohm, 2A, 0.05DCR, 0603 Murata

7 1 1 J1 Connector, SD/MMC4.0, Normal Mount, SMT Proconn

8 1 1 J2 Connector Housing Assembly, XD, SMT Proconn

9 1 1 J3 Connector, Mem. Stick, Classic-Duo-Pro-HG, Top Mount, SMT

Proconn

10 1 1 J7 Receptacle, USB, Style B, Right Angle, Through-hole FCI

11 1 1 LED1 LED, Bright Green, 0603 Rohm

12 1 1 LED3 LED, Bright Green, 0603 Rohm

13 1 1 R10 Resistor, 12.0K, 1%, 1/16W, 0603 Panasonic

14 2 2 R11,R13 Resistor, 100K, 5%, 1/16W, 0603 Panasonic

15 1 1 R14 Resistor, ZERO, 0.1W, 0603 Panasonic

16 1 1 R15 Resistor, 1Meg, 5%, 1/16W, 0603 Panasonic

17 1 1 R19 Resistor, 330, 5%, 1/16W, 0603 Panasonic

18 3 3 R3,R18,R21 Resistor, 10K, 5%, 1/16W, 0603 Panasonic

19 1 1 R4 Resistor, 2.2K, 5%, 1/16W, 0603 Panasonic

20 2 2 R7,R20 Resistor, 2.2K, 5%, 1/16W, 0603 Panasonic

21 18 18 RT1,RT2,RT3,RT4,RT5,R5,RT6, RT7,RT8,RT9,RT10,RT11,RT12, R12,RT13,RT17,RT18, RT19

Resistor, 33ohm, 5%, 1/20W, 0201 Rohm

22 3 3 RT20,RT21,RT22 Resistor, Zero, 5%, 1/20W, 0201 Rohm

23 1 1 TP17 Pin, Ferrule, Uninsulated, for 0.5mm wire, 6mm long Phoenix Contact

25 1 1 U1 IC, USB2240, USB 2.0 Bus Powered Flash Media Controller, QFN-36B

SMSC

25 1 1 U3 IC, MIC37100-3.3WS, LDO Regulator, 3.3V, 1A, SOT223-3

Micrel

26 1 1 Y1 Crystal, 24.000MHz, 50ppm, 18pF, HC-49SMT Citizen America

2014

Microchip T

echnology Inc.D

S5

0002298B-p

age 25

2 GX50A Do Not Popu-late

2 RM188R61C105KA93D Do Not Popu-late

2 RM155R71A104KA01D Do Not Popu-late

3 RM155R71H102KA01D Do Not Popu-late

3 RM155R71A104KA01D Do Not Popu-late

3 RM1555C1H4R7CZ01D Do Not Popu-late

3 EV-FK1C470UR Do Not Popu-late

3 LM18EG221SN1D Do Not Popu-late

3 -146285-0 Do Not Popu-late

3 J-002AH Do Not Popu-late

3 LP11SN900SL2 Do Not Popu-late

3 50-2505 Do Not Popu-late

3 RJ-3GEY0R00V Do Not Popu-late

4 RJ-3GEYJ471V Do Not Popu-late

4 CR006YZPJ000 Do Not Popu-late

4 -146285-0 Do Not Popu-late

4 4LC04BT-I/MC Do Not Popu-late

TA

Ite Manufacturer Part Number Notes

7 1 0 BR1 Diode, Bridge, Switching, 50V, 140mA, KCAC, SOT-143

Infineon Tech B

8 1 0 C18 Capacitor, 1.0uF, 16VDC, 10%, X5R, 0603 Murata G

9 2 0 C2,C10 Capacitor, 0.1uF, 6.3V, 10%, X5R, 0402 Murata G

0 8 0 C22,C23,C24,C25,C26,C39, C40,C41

Capacitor, 1000pF, 50V, 10%, X7R, 0402 Murata G

1 12 0 C28,C29,C30,C31,C32,C33, C34,C35,C36,C37,C38,C46

Capacitor, 0.1uF, 6.3V, 10%, X5R, 0402 Murata G

2 4 0 C42,C43,C44,C45 Capacitor, 4.7pF, 50V, +/-0.25pF, NPO, 0402 Murata G

3 1 0 C9 Capacitor, 47uF, 16VDC, 20%, Aluminum, SMT, 5mm x 6mm

Panasonic E

4 1 0 FB2 Ferrite Bead, 220 Ohm, 2A, 0.05DCR, 0603 Murata B

5 1 0 J5 Header, 1 x 4, 0.1 Inch, Vertical AMP 9

6 1 0 J6 Connector, Power Jack, 2.0mm, 12V, 4A, Right Angle

Cui Stack P

7 1 0 L1 Inductor, Common Mode Choke, DLP11SN900SL2, 0504

Murata D

8 1 0 LED2 LED, Orange, 5mm, TH, Right Angle Dialight 5

9 1 0 R16 Resistor, ZERO, 0.1W, 0603 Panasonic E

0 1 0 R17 Resistor, 470, 5%, 1/16W, 0603 Panasonic E

1 2 0 RT14,RT15 Resistor, Zero, 5%, 1/20W, 0201 Rohm M

2 10 0 tp1,tp8,tp9,tp10,tp11,tp12, tp13,tp14,tp15,tp16

Header, 1 x 1, 0.1 Inch, Vertical AMP 9

3 1 0 U2 IC, 24C04, 2 Wire Serial EPROM, 4Kb, 2.5V, DFN-8 Microchip Technology 2

BLE C-1: EVB-USB2240-IND EVALUATION BOARD BILL OF MATERIALS (CONTINUED)

m QtyQty

PopulatedReference Designator(s) Description Manufacturer


NOTES:



AMERICASCorporate Office2355 West Chandler Blvd.Chandler, AZ 85224-6199Tel: 480-792-7200 Fax: 480-792-7277Technical Support: http://www.microchip.com/supportWeb Address: www.microchip.com

AtlantaDuluth, GA Tel: 678-957-9614 Fax: 678-957-1455

Austin, TXTel: 512-257-3370

BostonWestborough, MA Tel: 774-760-0087 Fax: 774-760-0088

ChicagoItasca, IL Tel: 630-285-0071 Fax: 630-285-0075

ClevelandIndependence, OH Tel: 216-447-0464 Fax: 216-447-0643

DallasAddison, TX Tel: 972-818-7423 Fax: 972-818-2924

DetroitNovi, MI Tel: 248-848-4000

Houston, TX Tel: 281-894-5983

IndianapolisNoblesville, IN Tel: 317-773-8323Fax: 317-773-5453

Los AngelesMission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608

New York, NY Tel: 631-435-6000

San Jose, CA Tel: 408-735-9110

Canada - TorontoTel: 905-673-0699 Fax: 905-673-6509

ASIA/PACIFICAsia Pacific OfficeSuites 3707-14, 37th FloorTower 6, The GatewayHarbour City, KowloonHong KongTel: 852-2943-5100Fax: 852-2401-3431

Australia - SydneyTel: 61-2-9868-6733Fax: 61-2-9868-6755

China - BeijingTel: 86-10-8569-7000 Fax: 86-10-8528-2104

China - ChengduTel: 86-28-8665-5511Fax: 86-28-8665-7889

China - ChongqingTel: 86-23-8980-9588Fax: 86-23-8980-9500

China - HangzhouTel: 86-571-8792-8115 Fax: 86-571-8792-8116

China - Hong Kong SARTel: 852-2943-5100 Fax: 852-2401-3431

China - NanjingTel: 86-25-8473-2460Fax: 86-25-8473-2470

China - QingdaoTel: 86-532-8502-7355Fax: 86-532-8502-7205

China - ShanghaiTel: 86-21-5407-5533 Fax: 86-21-5407-5066

China - ShenyangTel: 86-24-2334-2829Fax: 86-24-2334-2393

China - ShenzhenTel: 86-755-8864-2200 Fax: 86-755-8203-1760

China - WuhanTel: 86-27-5980-5300Fax: 86-27-5980-5118

China - XianTel: 86-29-8833-7252Fax: 86-29-8833-7256

China - XiamenTel: 86-592-2388138 Fax: 86-592-2388130

China - ZhuhaiTel: 86-756-3210040 Fax: 86-756-3210049

ASIA/PACIFICIndia - BangaloreTel: 91-80-3090-4444 Fax: 91-80-3090-4123

India - New DelhiTel: 91-11-4160-8631Fax: 91-11-4160-8632

India - PuneTel: 91-20-3019-1500

Japan - OsakaTel: 81-6-6152-7160 Fax: 81-6-6152-9310

Japan - TokyoTel: 81-3-6880- 3770 Fax: 81-3-6880-3771

Korea - DaeguTel: 82-53-744-4301Fax: 82-53-744-4302

Korea - SeoulTel: 82-2-554-7200Fax: 82-2-558-5932 or 82-2-558-5934

Malaysia - Kuala LumpurTel: 60-3-6201-9857Fax: 60-3-6201-9859

Malaysia - PenangTel: 60-4-227-8870Fax: 60-4-227-4068

Philippines - ManilaTel: 63-2-634-9065Fax: 63-2-634-9069

SingaporeTel: 65-6334-8870Fax: 65-6334-8850

Taiwan - Hsin ChuTel: 886-3-5778-366Fax: 886-3-5770-955

Taiwan - KaohsiungTel: 886-7-213-7830

Taiwan - TaipeiTel: 886-2-2508-8600 Fax: 886-2-2508-0102

Thailand - BangkokTel: 66-2-694-1351Fax: 66-2-694-1350

EUROPEAustria - WelsTel: 43-7242-2244-39Fax: 43-7242-2244-393Denmark - CopenhagenTel: 45-4450-2828 Fax: 45-4485-2829

France - ParisTel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79

Germany - DusseldorfTel: 49-2129-3766400

Germany - MunichTel: 49-89-627-144-0 Fax: 49-89-627-144-44

Germany - PforzheimTel: 49-7231-424750

Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781

Italy - VeniceTel: 39-049-7625286

Netherlands - DrunenTel: 31-416-690399 Fax: 31-416-690340

Poland - WarsawTel: 48-22-3325737

Spain - MadridTel: 34-91-708-08-90Fax: 34-91-708-08-91

Sweden - StockholmTel: 46-8-5090-4654

UK - WokinghamTel: 44-118-921-5800Fax: 44-118-921-5820

Worldwide Sales and Service

03/25/14

http://support.microchip.com

http://www.microchip.com

EVB-USB2240-IND User’s Manual, Rev...

Documents

Transcript of EVB-USB2240-IND User’s Manual, Rev...