Evaluation Task VI

download Evaluation Task VI

of 8

  • date post

    22-Feb-2017
  • Category

    Education

  • view

    121
  • download

    0

Embed Size (px)

Transcript of Evaluation Task VI

What have you learnt about technologies from the process of constructing this product?Evaluation Task VI

Idents I To start with Software wise, we used Motion to create the ident.I used a Graphics tablet to draw a Sloth in Pixlemator (the process of this is up on my blog) and Kieran used Motion to physically make the ident for Dizzy Sloth. For this he made a Slothspin on the spot . This shows the use of multiple technologies/programmes to construct the product.

Idents II The second ident was made by me. I drew a box in Pixelmator and created an optical triangle illusion by positioning 9 cubes and then altering their layers and on the final cube, erasing some away. In order to add the movement, I split up the image to be able to drop in

a cube and it look believable as it needs to be behind one box and in front of another. So, in Motion I made the cube drop in and I found a tittle from FontSpace (that is legal to use) and in Final Cut, I added royalty free music that gradually fades out.

Final Cut Pro The second ident was made by me. I drew a box in Pixelmator and created an optical triangle illusion by positioning 9 cubes and then altering their layers and on the final cube, erasing some away. In order to add the movement, I split up the image to be able to drop in

The Camera Bags The standard bags that we are issued in Media containa Nikon SLR (and its charger), the Voice Recorder, an AUX lead, a Microphone, BoomPole, Tripod and a Clapper Board.We have used the camera bags before for the Preliminary Tasks, therefore I am use to the equipment.

On the location of our new film, we used a Roof balcony which as it is outdoors, gave off natural light. As a cameras viewfinder does not replicate what we see out the Human eye, I had to play around with the settings to understand how to change theThe Camera

exposure of the camera.

As I we are doing a musical, I require to record my song. We are wanting to do a sound bridge between the music in final product. I was required to record my own written song , to do this, I recorded the guitar and my voice individually and used my home software of CyberLink Audio Director to combine the two recordings to create the song. Before now, I had never used this software before BLAH BLAH

Sound Recording

The DJI Osmo In our first take of our film, we used a standard Steadicam from school, which upon reviewing the footage (found on our Rough Cut I, the footage was not at all steady, but very shaky. It is clear that there was not full control of the camera. You install the application onto a Smartphone, which acts as the viewfinder for the camera. The camera itself is remote control, therefore we have full control with smooth movements.

Photo from 4k.com