European Association for Social and Vocational ... - … EBG.pdf · European Association for Social...
Transcript of European Association for Social and Vocational ... - … EBG.pdf · European Association for Social...
Europäisches Bildungswerk für
Beruf und Gesellschaft gGmbH zertifiziert nach DIN EN ISO 9001-2008
trägerzertifiziert nach AZWV
European Association for Social
and Vocational Education (EBG)
Vocational Training in Shenyang China
Shenyang, 2nd of February 2010
Europäisches Bildungswerk für
Beruf und Gesellschaft gGmbH zertifiziert nach DIN EN ISO 9001-2008
Structure
- EBG in Germany
- status, staff & locations
- international Projects
- EBG in China
- location & partner
- projects
- The EBG-modules in Shenyang
- course preparation
- implementation of the course
- examination
- AHK & EBG – partner in education
- EBG China – service for and at enterprises
2
3
4
1
Europäisches Bildungswerk für
Beruf und Gesellschaft gGmbH zertifiziert nach DIN EN ISO 9001-2008
trägerzertifiziert nach AZWV
EBG Germany – status & staff
founded in 1990 at Düsseldorf as a gGmbH (non profit organization)
36 Training centers and specialized vocational schools at
• Sachsen
• Sachsen-Anhalt,
• Brandenburg
• Berlin
All institutes are DIN EN ISO 9001 certified
staff:• ca. 350 full time trainers, teachers,
administrative personal
• More then 1.000 freelancer trainer
North Rhine-Wesphalia
ÜRKZ Düsseldorf
Saxony-Anhalt
Board of Management
RKZ Halle/Leipzig
RKZ Sachsen Anhalt Mitte
RKZ Sachsen Anhalt Nord Ost
RKZ Harz
technical college Magdeburg
technical college
Halle/Naumburg
ÜRKZ biotechnology,
chemistry and environment
Halle
Vocational school metal
Brandenburg
RKZ Brandenburg
RKZ Havelland
RKZ Potsdam
technical college Brandenburg
Berlin
RKZ Berlin
Stabsstelle der
Geschäftsführung (quality
management, international
Projects)
Sachsen
RKZ Halle/Leipzig
technical college Leipzig
Europäisches Bildungswerk für
Beruf und Gesellschaft gGmbH zertifiziert nach DIN EN ISO 9001-2008
trägerzertifiziert nach AZWV
EBG - international projects
International projects: international network of EBG
Representations abroad (including european project partner
from our membership in the European Association of Instituts
for Vocational Training (EVBB))
Usbekistan
Norwegen
Schweden
Irland
England
Niederlande
Frankreich
Spanien
Polen
Russland
China
Vietnam
Bulgarien
Rumänien
Ungarn
Italien
TschechienSlowakei
Österreich
Schottand
EBG
Slowenien
Türkei
Portugal
Malta
Belgien
Estland
Griechenland
Libyen
Europäisches Bildungswerk für
Beruf und Gesellschaft gGmbH zertifiziert nach DIN EN ISO 9001-2008
trägerzertifiziert nach AZWV
WHY CHINA????
The biggest problems of China are of HR-nature,
among them recruiting, (further) education and
retention
Because of social prestige and bad career advice, a
high percentage of high-school degree holder go to
university
(German) companies in China need good qualified
technicians and skilled labour
We believe that vocational training is THE key to a
sucessfull business in China for EVERY company
Europäisches Bildungswerk für
Beruf und Gesellschaft gGmbH zertifiziert nach DIN EN ISO 9001-2008
EBG China – location and partner
Europäisches Bildungswerk für
Beruf und Gesellschaft gGmbH zertifiziert nach DIN EN ISO 9001-2008
Shanghaitime: 03.-06.2007
course for 30 students of Shanghai
Subject: CNC-drilling and CNC-miling
Place: EBG-facilities in Germany &
Petrochemical Academy (SPA)
Xi‘Antime: since 2009 ongoing
Courses for more then 30 students of Xi‘An
Subject: CNC-drilling and CNC-miling
Place: EBG-facilities in Germany & Shanxi Technological
of Xi‘An (STB)
Shenyang / Liaoningtime: 08.-12.2007
Further qualification of 16 trainer from chosen schools of
the Liaoning Department for Labour and social security
(LPDLSS)
Subject: CNC-drilling
Place: EBG-facilities in Germany
Shenyangtime: since 2007 ongoing
course for 120 + 60 students of Shenyang
Subject: CNC-drilling and CNC-miling, Mechatronics
Place: Equipment Manufacturing Engineering School’
(SEMES) (chosen school of the Liaoning Department for
Education which visits us with chosen directors 2010)
Qingdaotime: 2005-2006
course for 50 chinese teacher and trainer organized by
the employment centre Qingdao
Subject: CNC, mechatronics and welding
Place: EBG-facilities in Germany
EBG in China - completed & ongoing projects
Chongqingtime: since 2008 ongoing
CNC-course for 35 students of Chongqing
Subject: CNC-drilling and CNC-miling, Mechatronics
Place: EBG-facilities in Germany &Industry Polytechnical
College (CQIPC)
Europäisches Bildungswerk für
Beruf und Gesellschaft gGmbH zertifiziert nach DIN EN ISO 9001-2008
1. Metal Engineering (Mechatronics, CNC-milling/
drilling, moulding construction, welding etc.)
2. Language courses
3. Chemistry, biochemistry, environmental protection
4. Health care /
old peoples care
EBG China – vocational education and further qualification
Europäisches Bildungswerk für
Beruf und Gesellschaft gGmbH zertifiziert nach DIN EN ISO 9001-2008
Selection of suitable Chinese partner institutions in Shenyang:• sufficient stock of machines for CNC-drilling/milling / mechatronics,
tools and testing instruments
• good qualified teacher and trainer
Further qualification of Chinese trainer at EBG in Germany (duration: 4-6 weeks):
• get familiar with German training plans according IHK-standards ‘CNC-drilling + milling’
• Training in methods for vocational training
• system of vocational training + further qualification in Germany
• Excursions to enterprises: technical developments
Preparation of the implementation of classes at Chinese partner institution (duration: 180 or 360 hours)
• CNC-drilling or milling (each 180 hours) or
• complete package / mechatronic package (360 hours)
1
2
3
The EBG modules in Shenyang – Course preparation
Europäisches Bildungswerk für
Beruf und Gesellschaft gGmbH zertifiziert nach DIN EN ISO 9001-2008
Provision of ‘EBG/IHK-training plans CNC / mechatronic’ for partner institution and translation into Chinese
Examination of training capability according the IHK-standards by EBG-experts before the course starts
Implementation of the training by Chinese CNC-trainers who were qualified by EBG in Germany before
Coaching of the course in China by EBG from Germany and China
The EBG modules in Shenyang – implementation of courses
1
2
3
4
Europäisches Bildungswerk für
Beruf und Gesellschaft gGmbH zertifiziert nach DIN EN ISO 9001-2008
EBG creates a CNC / mechatronics -final examination according IHK-standards for the Chinese partner institution and translates this into Chinese
EBG send German CNC / mechatronics-experts to the partner institution before the course is finished to prepare the IHK/AHK- examination
Implementation of the examination according DIHK-standards. Duration of examination each 9,5 hours for CNC-drilling OR milling or for mechatronics
Commission of examination: 4 representatives of IHK-Magdeburg and Potsdam + 1 representative of AHK
Certification of successful participations by of EBG and AHK as ‘CNC-/ mechatronics skilled worker’
The EBG modules in Shenyang – examination
1
2
3
4
5
Europäisches Bildungswerk für
Beruf und Gesellschaft gGmbH zertifiziert nach DIN EN ISO 9001-2008
AHK set up a member in the commission of examination
Organisation of Round-Tables and enterprise conferences in order to inform companies about AHK / EBG-projects
AHK offers EBG and Chinese partner schools an own platform for advertisement
Accreditation of AHK-certificate by the Chinese Work- and Education ministry
AHK asks for a fee of 500,- RMB for every AHK-certificate ‘CNC-skilled worker drilling/milling’ – all interested persons can join
AHK and EBG - Partner in Education
Europäisches Bildungswerk für
Beruf und Gesellschaft gGmbH zertifiziert nach DIN EN ISO 9001-2008
AHK/EBG-Modules
services at and for enterprises
This vocational education has the aim to support German Companies in China
recruiting, we hope to establish a cooperation regarding job interviews of our
certificate holder.
CNC- and mechatronic modules are focusing upon improving manual skills handling concerning machines, tools and material, thus Modules make the transition from college or Vocational School into the enterprise easier.
Modules are suitable for students of vocational schools as for skilled workers.Companies can invite experienced workers to take part in short time training courses to strengthen the loyalty between employees and employer – Retention measurement.
Practically oriented CNC- / mechatronic modules can also be hold at Foreign companies in China (In-house-training) without any problems
International certificates (IHK/ AHK) guarantee high quality standards
1
2
3
4
5
Europäisches Bildungswerk für
Beruf und Gesellschaft gGmbH zertifiziert nach DIN EN ISO 9001-2008
your contact in China:
Frank Lenhardt
eMail: [email protected]
Websites:
http://www.ebg.de
http://www.ebg-china.com
European Association for Social
and Vocational Education (EBG)