EU-TYPE EXAMINATION CERTIFICATElibrary.e.abb.com/public...Original Project I.D. 3056806 Certificate...
4
Mick Gower Certification Manager, FM Approvals Ltd Issue date: 30 th October 2017 THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE FM Approvals Ltd. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS T: +44 (0) 1753 750 000 F: +44 (0) 1753 868 700 E-mail: [email protected] www.fmapprovals.com F ATEX 020 (Apr/16) Page 1 of 3 1 EU-TYPE EXAMINATION CERTIFICATE 2 Equipment or Protective systems intended for use in Potentially Explosive Atmospheres - Directive 2014/34/EU 3 EU-Type Examination Certificate No: FM16ATEX0003X 4 Equipment or protective system: (Type Reference and Name) MS10 Level Switch 5 Name of Applicant: ABB, Inc. – BU Measurement Products 6 Address of Applicant: 125 East County Line Road Warminster, PA 18974 USA 7 This equipment or protective system and any acceptable variation thereto is specified in the schedule to this certificate and documents therein referred to. 8 FM Approvals Ltd, notified body number 1725 in accordance with Article 17 of Directive 2014/34/EU of 26 February 2014, certifies that this equipment has been found to comply with the Essential Health and Safety Requirements relating to the design and construction of equipment intended for use in potentially explosive atmospheres given in Annex II to the Directive. The examination and test results are recorded in confidential report number: 3056806 dated 26 th July 2016 9 Compliance with the Essential Health and Safety Requirements, with the exception of those identified in item 15 of the schedule to this certificate, has been assessed by compliance with the following documents: EN60079-0: 2012 + A11: 2013, EN60079-11: 2012, EN60529: 1991 + A1: 2000 10 If the sign ‘X’ is placed after the certificate number, it indicates that the equipment is subject to specific conditions of use specified in the schedule to this certificate. 11 This EU-Type Examination certificate relates only to the design, examination and tests of the specified equipment or protective system in accordance to the directive 2014/34/EU. Further requirements of the Directive apply to the manufacturing process and supply of this equipment or protective system. These are not covered by this certificate. 12 The marking of the equipment or protective system shall include: II 1 G Ex ia IIC T6 Ga, Ta = -40°C to +80°C cn=Mick Gower, o=FM Approvals, ou, email=mick.gower@fmapprovals. com, c=GB 2017.10.30 14:10:20 Z
Transcript of EU-TYPE EXAMINATION CERTIFICATElibrary.e.abb.com/public...Original Project I.D. 3056806 Certificate...
Mick Gower Certification Manager, FM Approvals Ltd
Issue date: 30th October 2017
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals Ltd. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS T: +44 (0) 1753 750 000 F: +44 (0) 1753 868 700 E-mail: [email protected] www.fmapprovals.com
F ATEX 020 (Apr/16) Page 1 of 3
1 EU-TYPE EXAMINATION CERTIFICATE
2 Equipment or Protective systems intended for use in Potentially
Explosive Atmospheres - Directive 2014/34/EU
3 EU-Type Examination Certificate No: FM16ATEX0003X
4 Equipment or protective system: (Type Reference and Name)
MS10 Level Switch
5 Name of Applicant:
ABB, Inc. – BU Measurement Products
6 Address of Applicant:
125 East County Line Road Warminster, PA 18974 USA
7 This equipment or protective system and any acceptable variation thereto is specified in the schedule to this certificate and documents therein referred to.
8 FM Approvals Ltd, notified body number 1725 in accordance with Article 17 of Directive 2014/34/EU of 26 February 2014, certifies that this equipment has been found to comply with the Essential Health and Safety Requirements relating to the design and construction of equipment intended for use in potentially explosive atmospheres given in Annex II to the Directive. The examination and test results are recorded in confidential report number:
3056806 dated 26th July 2016
9 Compliance with the Essential Health and Safety Requirements, with the exception of those identified in item 15 of the schedule to this certificate, has been assessed by compliance with the following documents:
EN60079-0: 2012 + A11: 2013, EN60079-11: 2012, EN60529: 1991 + A1: 2000
10 If the sign ‘X’ is placed after the certificate number, it indicates that the equipment is subject to specific conditions of use specified in the schedule to this certificate.
11 This EU-Type Examination certificate relates only to the design, examination and tests of the specified equipment or protective system in accordance to the directive 2014/34/EU. Further requirements of the Directive apply to the manufacturing process and supply of this equipment or protective system. These are not covered by this certificate.
12 The marking of the equipment or protective system shall include:
II 1 G Ex ia IIC T6 Ga, Ta = -40°C to +80°C
cn=Mick Gower, o=FM Approvals,
ou,
email=mick.gower@fmapprovals.
com, c=GB
2017.10.30 14:10:20 Z
SCHEDULE
to EU-Type Examination Certificate No. FM16ATEX0003X
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals Ltd. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS T: +44 (0) 1753 750 000 F: +44 (0) 1753 868 700 E-mail: [email protected] www.fmapprovals.com
F ATEX 020 (Apr/14) Page 2 of 3
13 Description of Equipment or Protective System:
The MS10 Level Switch measures the level of a liquid using a pivoting stainless steel float with an integral magnet to activate a reed switch. The body of the apparatus is in the form of a threaded connector, to facilitate fitting into pipework or tank walls. The reed switch is considered to be simple apparatus. The MS10 Level Switch may optionally be fitted with a variety of extended supports for the float and the reed switch. The reed switch is fitted with unterminated leads for user connection. The MS10 Level Switch is made of a solid stainless steel housing which is available in a selection of process connection threads of various flange sizes and one ½-NPT conduit entry. Because of this construction the enclosure is considered to comply with EN 60529 for IP66 and IP67. The IP rating is not relied upon for the hazardous area protection. Electrical data Entity Parameters Ui = 100V, Ii = 700mA, Pi = 1.7W, Ci = 0, Li = 0 MS10.a.b.c.d.e.f.g Level Switch a = Process Connection 15, 20, WP, FL, T2 or S2. b = Flange Process Connection Material: X, 316 or CST c = Process Connection Size/Rating/Type: xxx (representing specific type, material & rating from SLG-0001-1 Flange Designation Chart). d = Tag with Customer Specified Information: X or NT. e = Insertion Length EXT1, EXT2, EXT3, EXT4 or EXTN (custom insertion length N = 6� to 14 in / 168 to 356 mm). f = High Pressure Option: X, HP, 1, 2, 3, 4 or 5. g = Approvals: E1, E2
14 Specific Conditions of Use:
1. The supply connection for the apparatus is by an unterminated lead, and when installed, the connection must have an ingress protection level of at least IP20.
2. The apparatus may be fitted with a titanium float. This must be taken into account during installation to prevent possible sparking.
15 Essential Health and Safety Requirements:
The relevant EHSRs that have not been addressed by the standards listed in this certificate have been identified and assessed in the confidential report identified in item 8.
16 Test and Assessment Procedure and Conditions:
This EU-Type Examination Certificate is the result of testing of a sample of the product submitted, in accordance with the provisions of the relevant specific standard(s), and assessment of supporting documentation. It does not imply an assessment of the whole production. Whilst this certificate may be used in support of a manufacturer’s claim for CE Marking, FM Approvals Ltd accepts no responsibility for the compliance of the equipment against all applicable Directives in all applications. This Certificate has been issued in accordance with FM Approvals Ltd’s ATEX Certification Scheme.
SCHEDULE
to EU-Type Examination Certificate No. FM16ATEX0003X
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals Ltd. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS T: +44 (0) 1753 750 000 F: +44 (0) 1753 868 700 E-mail: [email protected] www.fmapprovals.com
F ATEX 020 (Apr/14) Page 3 of 3
17 Schedule Drawings
A list of the significant parts of the technical documentation is annexed to this certificate and a copy has been kept by the Notified Body.
18 Certificate History
Details of the supplements to this certificate are described below:
Date Description
01st August 2016 Original Issue.
30th October 2017
Supplement 1: Report Reference: RR210916 dated 27th October 2017 Description of the Change: Transfer of the product and related certificates to a different division of ABB. Changes to related documentation.
Blueprint ReportABB Inc - BU Measurement Products (1000000328)Class No 3615
Original Project I.D. 3056806
Certificate I.D. FM16ATEX0003X
Drawing No. Revision Level Drawing Title Last Report Electronic Drawing
MS10-0016-7 H MS10 ATEX & IECEx INTRINSICALLY SAFE NAMETAG RR209734 Yes (pdf)
MS10-0062-1 D MS10 SERIES CERTIFICATION 3056806 Yes (pdf)
MS10-0303-1 NC MODEL OPTION CODE (IS) 3056806 Yes (pdf)
MS10-0303-2 A MS10 EXPLOSIVE ATMOSPHERES OPTION CODES 3056806 Yes (pdf)
MS10-0923-2 C INSTALLATION DRAWING I.S. 3056806 Yes (pdf)
MS10-1000-1 J ASSEMBLY, MS10 REED SWITCH 3056806 Yes (pdf)
OI_MS10-EN F INSTALLATION AND OPERATION MANUAL RR209734 Yes (pdf)
30/10/2017 Page 1 of 1
