EU type-examination certificate UK/0126/0019 Revision 35 · 2014/32/EU. 2 DESCRIPTION OF THE...

UK/0126/0019

MI-008

Issue Date: Valid Until:

22 July 2020 04 March 2028

Grégory Glas Lead Technical Manager For and on behalf of the Head of Technical Services

0135 NMO I Stanton Avenue I Teddington I TW11 0JZ I United Kingdom

Tel +44 (0) 20 8943 7272 I Fax +44 (0) 20 8943 7270 I Web www.gov.uk/government/organisations/office-for-product-safety-and-standards NMO is part of the Office for Product Safety and Standards within the Department for Business, Energy & Industrial Strategy

EU type-examination certificate UK/0126/0019 Revision 35 Issued by:

NMO Notified Body Number 0126

In accordance with the requirements of the Measuring Instruments Regulations 2016 (S.I. 2016 No. 1153) which implement, in the United Kingdom, Council Directive 2014/32/EU, this EU-type examination certificate has been issued to: NINGBO GREAT WALL PRECISION INDUSTRIAL CO., LTD (Konfoong Group Ltd, Hong Kong) 1 Konfoong Road Yangming Technology Industrial Park Yuyao City Zhejiang Province China 315400 in respect of: Material measure of length accuracy class: II nominal lengths and widths: 2 m x 12.5 mm

Additional models, lengths and widths up to 50 m x 15 mm are described in section 7 of the descriptive annex to this certificate. The necessary data (principal characteristics, alterations, securing, functioning etc) for identification purposes, and conditions (when applicable), are set out in the descriptive annex to this certificate. This revision replaces previous versions of the certificate.

2

Descriptive Annex 1 REGULATIONS The measuring instrument in respect of which this EU type examination certificate has been issued is subject to the provisions and requirements of the Measuring Instruments Regulations 2016 (S.I. 2016 No. 1153) which implement, in the United Kingdom, Council Directive 2014/32/EU.

2 DESCRIPTION OF THE PATTERN The pattern is a small composite measure, which has a dual graduated blade. The blade is 2 m long, 12.5 mm wide, made of steel with a sliding hook at the free end. It has black and red markings on a white, or yellow, background protected by a clear film. The blade is graduated in millimetres throughout on both edges; half-centimetres are also marked. The centimetre and the decimetre intervals are numbered consecutively throughout.

3 TECHNICAL DATA 3.1 (a) Accuracy class: II

(b) Nominal length: 2 m (c) Scale interval: 1 mm

4 INSCRIPTIONS The following inscriptions are marked at the beginning of the blade on the front face:

(a) Nominal length: 2 m (b) Manufacturer's identification: “GREAT WALL” and/or logo (c) Class of accuracy: II (d) EU type examination certificate: UK/0126/0019

5 APPROVAL CONDITIONS The certificate is issued subject to the following conditions.

5.1 Legends and inscriptions

5.1.1 The following markings and inscriptions are durably and legibly marked onto the blade of the tape measure:

- CE marking - Supplementary metrology marking - Manufacturer’s name, registered trade name or registered trade mark and

postal address - Identification number of the notified body involved in the production control

phase - Information in respect of its accuracy

and, when applicable: - Information in respect of the conditions of use - Measuring capacity - Identity marking (a type, batch or serial number or other element allowing

their identification) - Number of the EU-type examination certificate - Information whether or not additional devices providing metrological results

comply with the provisions of Directive 2014/32/EU on legal metrological control

3

The markings and inscriptions shall fulfil the requirements of Article 8, Article 21, Article 22 and Point 9 of Annex I of Directive 2014/32/EU.

5.1.2 The model of the tape measure cases are identified by the series number. The following codes may follow the case series number to denote the associated blade width:

• W 16 mm • E 19 mm • X 25 mm • Y 27 mm • F 32 mm

6 LOCATION OF MARKS 6.1 The inscription in section 4 together with the ‘CE’ marking, supplementary metrology marking and notified body number are printed on the blade near the beginning. An example of the markings is shown in Figure 1.

7 ALTERNATIVES 7.1 Having alternative models of steel tape measure blade as described in Table 1 below.

Accuracy class

Nominal length (m)

Nominal widths (mm)

Accuracy class

Nominal length (m)

Nominal widths (mm)

II 1 6 II 5.5 16, 19, 25, 27

II 2 6, 12.5, 16 II 6 19, 25

II 3 12.5, 16, 19 II 7.5 25, 27

II 3.5 12.5, 16, 19 II 8 25, 27, 32

II 5 12.5, 16, 19, 25, 27 II

10 10, 12.5, 25, 27, 32

II 20 10, 12.5 II 30 10, 12.5, 32

II 50 10, 12.5, 32

Table 1 7.1.1 The blade may be enclosed in a plastic case which is identified by the model series number, e.g. GW 203 - GW (Great Wall), -2 (nominal length), 03 (case series number). The following table lists those cases which are marked with a case dimension for making internal measurements. 7.1.1.1 Having the case series listed in Table 2 without a case dimension marking, for making internal measurements.

Accuracy class

Case series

Case marking (mm)

Accuracy class

Case series

Case marking (mm)

II 03 66 II 37 75 II 03 72 II 53 60 II 05 57 II 53 70 II 05 63 II 53 82 II 09 64 II 53 87 II 09 70 II 56 56

4

II 12 63 II 56 73 II 12 66 II 56 85 II 12 72 II 58 85 II 29 80 II 58 86 II 35 70 II 75 60 II 37 63 II 75 70

Table 2 7.1.2 The following case/reel series are not marked with a case dimension for making internal measurements*. The case/reel may be in any colour.

Series 01 Series 02 Series 10 Series 11 Series 16 Series 18 Series 28 Series 42 Series 39 Series 46 Series 55 Series 66 Series 61 Series 68 Series 69 Series 77 Series 78 Series 80 Series 81 Series 85 Series 89 Series 92 Series 96 Series 99 Series A1 Series A2 Series A8 Series A15 Series A18 Series A19 Series J7 Series J8 Series J11 Series J13 Series J15J Series J18 Series A25 Series 62 Series 31 Series 35* Series 11-1 Series A44 Series 15 Series 78-1 Series J19 Series 08-1 Series YJ-09 Series 43 Series 74 Series 83 Series 98 Series 8 Series 1 Series 85 Series 3 Series 5 Series 71 Series 72 Series A60 Series A61 Series 45 Series 73 Series 21 Series 23 Series A50 Series A51 Series A52 Series A53 Series A54 Series A50W Series A58W Series A57

Table 3 * Note: Case series 35 may have Imperial graduations marked on the lower edge. These

have been taken in to consideration as ‘supplementary indications’. Approval under this Certification is limited to the metric graduations only.

7.1.3 The case may be fitted with any of the following: • blade lock, • belt clip • wrist / carrying strap.

7.1.4 The blade may be fitted with a magnet on the end hook. The magnet should only be used as a “reference point” for the blade when a measurement is made with the blade “under compression”, and not be used as a “reference point” for the blade when a measurement is made with the blade “under tension”.

7.1.5 The case, which may be any colour, may be marked with a case dimension, as indicated in table 2, for making internal measurements. The strap should not interfere with the measurement when making internal dimension measurements.

5

7.1.6 The case may be fitted with a rubber sleeve / grip. 7.1.7 The belt clip shall not obscure case dimension markings. 7.1.8 Having the following markings, which are in addition to the manufacturer’s identification of “GREAT WALL” and/or logo.

• METLAND • JEWSON • ALFA • WOMAX • WALTER • KARAN • ROTHENBERGER • VALEX • RAAB KARCHER • AKIFIX • ALYCO • TOPEX • CONTINENTAL • NEO TOOLS • TORNEIRO • TOP TOOLS • GOOD YEARS • SKIL • NOVIPro • ANT • SIBA • COSMOS • HODARA (Brand name: Hu firma) • UGR • ADW • SKILLS • TOP CRAFT • VIP-TEC • WISVO • NoRa • BRüDER MANNESMANN • GO/ON • KLY-TEK • ORIENT • BLACK&DECKER • FORTE • SPEAR & JACKSON ECLIPSE • JUNIOR • MEISTER • ERATOOL • ÌNANÇ • TECHNO TOOLS • YILTEK • ZJD • HOLDON • BOSCH • ETVAL • Tchokko! • Hornbach Baumarkt AG • SENUKU PREKYBOS CENTRAS UAB • Metrica or RING • Beta • ZiMAK • ayce • KRL • PROTECO • PIONER • DURO • GISS • KNITEX • M.Ç. Extra • HAMDi KÜÇÜK • KUPA • ARK • CMC • KENSTON • MAYOTA • AmazonBasics • HAUS or HALT • PRIMASTER or Trendline • toom or b1 • CON:P, or Connex, or Werkzeyt, or

meister, or , or meistercraft • GFB • ZMK

7.1.9 Having an alternative model of 5 m x 19 mm, which has a dual graduated blade. The blade is graduated in millimetres throughout on the upper edge, and Imperial graduations on the lower edge. The imperial graduations have been taken in to consideration as ‘supplementary indications’. Approval under this Certification is limited to the metric graduations only.

6

7.1.10 Having the following alternative model identifications for the additional markings specified:

WISVO Hu firma SKIL 44.025802 HF775 F0150505AA 44.035835 HF776 F0150508AA 44.055805 HF777 44.085808 HF778 44.105810

Table 4 WISVO model 44.085808 is marked with a case dimension of 85 mm. Hu firma model HF778 may be marked with a case dimension of 85 mm. 7.1.11 Having the following alternative model identifications for the additional markings specified:

VIP-TEC VT300316 VT310316 VT3201013 VT3301013

VT300516 VT310519 VT3202013 VT3302013

VT300519 VT310525 VT3203013

VT300525 VT3205013

Table 5 7.1.12 Having alternative models which have a dual graduated blade. The blade is graduated in millimetres throughout on the lower edge, and Imperial graduations on the upper edge. The imperial graduations have been taken in to consideration as ‘supplementary indications’. Approval under this Certification is limited to the metric graduations only.

Accuracy class Nominal length Nominal widths(mm) II 3m / 10ft 16

II 8m / 26ft 25

Table 6 7.1.13 Having the following alternative model identifications for the additional markings specified:

MEISTER,B1, MEROX,TOOM 6532300 6530008 6509000 6508000

6532308 6530200 6531000 6508010

6532500 6530206 6531008 6530100

6532508 6530208 6571006 6530106

6532800 6530250 6571008 6530108

6532808 6530300 6572006

6530000 6530350 6572008

6530006 6530358 6575010

Table 7

7


Great Wall KLY-TEK Great Wall KLY-TEK JGW-208 AK108 JGW-2011 AK152

JGW-308 AK109 JGW-3011 AK153

JGW-508 AK110 JGW-5011 AK154

GWF-1016 AK148 GWF-3016 AK150

GWF-2016 AK149 GWF-5016 AK151

Table 8


Great Wall ORIENT Great Wall ORIENT GW-269 AK111 JGWF-301 AK132

GW-269W AK112 JGWF-501 AK133

GW-369 AK113 JGW-208 AK134

GW-369W AK114 JGW-308 AK135

GW-569W AK115 JGW-508 AK136

GW-569E AK116 GW-1085X AK137

GW-569X AK117 GW-285 AK138

GW-7H69X AK118 GW-285W AK139

GW-1069X AK119 GW-385 AK140

GW-246 AK120 GW-385W AK141

GW-246W AK121 GW-585E AK142

GW-346 AK122 GW-585X AK143

GW-346W AK123 GW-7H85X AK144

GW-346E AK124 JGWF-203 AK145

GW-546W AK125 JGWF-303 AK146

GW-546E AK126 JGWF-503 AK147

GW-546X AK127 JGW-105 AK155

GW-846X AK128 JGW-205 AK156

GW-1046X AK129 JGW-305 AK157

JGWF-101 AK130 JGW-505 AK158

JGWF-201 AK131

Table 9

8


Great Wall Tchokko! GW-539X AT-5073


Great Wall Hornbach Baumarkt AG GW-346W 8214760 GW-546E 8214761 GW846X 8214762

GWF-3016 8214759


Great Wall Metrica or RING JGWF-501 40235

Table 12

7.1.19 Having the following blades fitted to a case style 93 or J20, bearing no dimensions:

Accuracy class Nominal length (m) Nominal widths (mm) II 10 10, 12.5, 25, 32 II 20 10, 12.5 II 30 10, 12.5, 32 II 50 10, 12.5, 32

Table 13

7.1.20 Having the following blades fitted to a case style A62, A63 or A65, bearing no dimensions:

Accuracy class Nominal length (m) Nominal widths (mm) II 3 12.5, 16, 19 II 3.5 12.5, 16, 19 II 5 12.5, 16, 19, 25 II 5.5 16, 19, 25 II 6 19, 25 II 7.5 25 II 8 25, 32 II 10 10, 12.5, 25, 32


9

Great Wall KRL GW-366W KRL-366W GW-566E KRL-566E GW-566X KRL-566X

GW-1066X KRL-1066X

Table 15

7.2 Having alternative models of tape measure blade as described in the table below, manufactured from fibreglass, which can be identified by the model series number, e.g. GWF 3016 - GW (Great Wall), F – fibreglass,-30 (nominal length), 16 (case series number).The blade may be enclosed in a close case or open reel.

Accuracy class Nominal length (m) Nominal widths (mm) III 10 13, 15

III 15 13, 15

III 20 13, 15

III 30 13, 15

III 50 13, 15

Table 16

7.2.1 The centimetre intervals on the blade are numbered consecutively from 1 to 9 for each decimetre; this pattern is repeated throughout the blade. Half-decimetres are marked with an arrow. The number of metres is stated in red. The scale markings are in black on a white background. The blade is terminated by a metal ring, which is attached by means of a reinforcing plastic strip approximately 6 cm long. The zero mark is offset approximately 8 cm inwards from the end of the blade or the graduation starts from the attachment ring.

7.2.2 The blade may be fitted with a plastic ring and metal end-hook attached to it by means of a plastic clamp that obscures up to the first 30 mm of the blade. The end-hook may be laid flat against the plastic clamp when not in use. The first 195 mm of the blade may be covered by a yellow, transparent plastic reinforcing strip.

7.2.3 The blade may be fitted to a case type J20 (Figure 56).

7.3 Having an alternative style of hook fitted to the end of the tape measure blade, as shown in figure 15.

7.4 Having alternative models of tape measure blade as described in the table below, see figure 55, manufactured from fibreglass, which can be identified by the model series number, e.g. GWF 3XX - GW (Great Wall), F – fibreglass,-3 (nominal length), The blade has no case or open reel. They have the additional manufacture’s mark of the Post Office:

Accuracy class Nominal length (m) Nominal widths (mm)

III 3 20

Table 17

10

7.5 The scale ends at the nominal length, then there is a blank space where the manufacturer and importer address are printed according to Directive 2014/32/EU.

7.6 Having the following alternative model identifications for the additional markings specified:

Great Wall ETVAL Nominal Length (m) Nominal Width (mm) GW-353W STE10041 3 16 GW-553W STE10042 5 16 GW-553E STE10043 5 19 GW-553X STE10044 5 25 GW-853X STE10045 8 25

GW-1053X STE10046 10 25

Table 18 7.7 Having the following alternative model identifications for the additional markings specified:

Great Wall GISS Nominal Length (m) Nominal Width (mm) GW-372W 867688 3 16 GW-572E 867689 5 19 GW-872X 867690 8 25

Table 19 7.8 Having the following blades fitted to case style 25 (Figure 66), bearing no case dimensions:

Accuracy class Nominal length (m) Nominal widths (mm) II 10 10, 12.5, 25, 32 II 20 10, 12.5 II 30 10, 12.5, 32 II 50 10, 12.5, 32

Table 20 7.9 Having the following models, and alternative identifications for the additional markings specified, fitted to case style A57 (Figure 65) bearing no case dimensions:

GREAT WALL BOSCH Nominal length (m) Nominal width

(mm) Accuracy

class GW-5A57Y 1600A016LD 5 27 II GW-8A57Y 1600A016LE 8 27 II

Table 21

7.10 Having the following case/reel series, which are not marked with a case dimension for making internal measurements, the case/reel series may be in any colour.

GW-L107S Series 09 Series 89-1 Series 85-1 Series B3-1 Series B3-2 Series A74 Series A75 GW-D040 Series 07 Series 21

Table 22 Any accessory functional modules (listed but not limited to the following: level bubble, calculator and solar power module) are out of the scope of this certificate.

11

7.11 Having the following alternative model identifications for the additional markings specified:

Great Wall Model name Meister model name LOGO

Series 89-1

2214980 b1 8971430 Meister 8973630 Meister 8973710 Meister

CP566043 Werkzeyt CP566044 conmetall CP566060 conmetall CP566073 Werkzeyt

Series 85-1 2216333 toom 8973350 Meister

Series 02

5970089 Primaster 8060083 toom

COX566101 CONNEX 5970103 Primaster 1332182 toom 1358922 b1 4920221 Meister 7249100 toom 8971440 Meister 8971460 Meister 8971470 Meister 8971480 Meister 8973740 Meister

COX566131 CONNEX COX566229 CONNEX

8973750 Meister 8060083 toom 8355680 toom 8059579 toom 8337078 toom 5970099 Primaster 5970023 Trendline

Series B3-2 1992927 toom 6509150 Meistercraft 6509100 meistercraft

Steel long tape Series 07 6571008 toom 6572000 Meister 6572008 toom

Steel long tape Series 21 6576408 b1 6576400 Meister

Table 23

12

8 ILLUSTRATIONS Figure 1 The pattern Figure 2 Series 03 case Figure 3 Series 05 case Figure 4 Series 09 case Figure 5 Series 12 case Figure 6 Series 29 case Figure 7 Series 37 case Figure 8 Series 53 case Figure 9 Series 56 case Figure 10 Series 58 case Figure 11 Series 75 case Figure 12 Series HF 77x Figure 13 Series A18 GW8A18X case Figure 14 Dual graduated blade model. Figure 15 Alternative model of hook Figure 16 Series JGW-Y Figure 17 Series J5 Figure 18 Series 78 case Figure 19 Series 02 case Figure 20 Case style – Series 16 Figure 21 Case style – Series 11 Figure 22 Case style – Series A25 Figure 23 Case style – Series 62 Figure 24 Case style – Series 31 Figure 25 Case style – Series 35 Figure 26 Case style – Series 11-1 Figure 27 Case style – Series A44 Figure 28 Case style – Series 15 Figure 29 Case style – Series 78-1 Figure 30 Case style – Series J19 Figure 31 Case style – Series 08-1 Figure 32 Case style – Series YJ-09 Figure 33 Example of dual graduated blade design (metric lower scale) Figure 34 Case style - Series A1 Figure 35 Case style - Series 43 Figure 36 Case style - Series 74 Figure 37 Case style - Series 83 Figure 38 Case style - Series 98 Figure 39 Case style - Series 8 Figure 40 Case style - Series 1 Figure 41 Case style - Series 85 Figure 42 Case Style - Series 3 Figure 43 Case Style - Series 5 Figure 44 Case Style - Series 69 Figure 45 Case Style - Series 46 Figure 46 Case Style - Series 39 Figure 47 Case Style - Series 71 Figure 48 Case Style - Series 72 Figure 49 Case Style - Series A60 Figure 50 Case Style - Series A61 Figure 51 Case Style - Series 45 Figure 52 Case Style - Series 73 Figure 53 Case Style - Series 23 Figure 54 Case Style - Series 21 Figure 55 3 m fibreglass blade Figure 56 Case Style - Series 93 Figure 57 Case Style - Series J20 Figure 58 Case Style - Series J22 Figure 59 Case Styles A62/A63/A65 Figure 60 Case Style 09 (alternative) Figure 61 Case Styles A50, A51, A52,

A53 & A54 Figure 62 BOSCH Figure 63 Case Style - Series A50W Figure 64 Case Style - Series A58W Figure 65 Case Style - Series A57 Figure 66 Case Style - Series 25 Figure 67 Case Style - Series GW-L107S Figure 68 Case Style - Series 09 Figure 69 Case Style - Series 89-1 Figure 70 Case Style - Series 85-1 Figure 71 Case Style - Series B3-1 Figure 72 Case Style - Series B3-2 Figure 73 Case Style - Series A74 Figure 74 Case Style - Series A75 Figure 75 Case Style - Series GW-D040 Figure 76 Case Style - Series 07 Figure 77 Case Style - Series 21

13

9 CERTIFICATE HISTORY

ISSUE NO. DATE DESCRIPTION

UK/0126/0019 20 August 2007 Type examination certificate first issued.

UK/0126/0019 Rev 1

05 November 2007 Revision 1 issued. Modification to Section 7.1.8: i) “Having the following alternative manufacturer’s identification” is changed to “Having the manufacturer’s following alternative identification” ii) Addition of manufacturer’s alternative identification “COSMOS

UK/0126/0019 Rev 2

14 January 2008 Revision 2 issued. Modification to Section 7.1.8: i) “Having the manufacturer’s following

alternative identification” is changed to

“Having the following markings, which are in addition to the manufacturer’s identification of “GREAT WALL” and/or logo”.

ii) Addition of manufacturer’s alternative identification ADW.

Modification to Section 7.1.10: “Having the following alternative model identifications with the following manufacturer’s alternative identification:”

is changed to “Having the following alternative model identifications for the additional markings specified:”

Figure 13 Dual graduated blade model is renumbered as Figure 14 New Figure 13 Case style – A18 GW8A18X series inserted

UK/0126/0019 Rev 3

13 May 2008 Revision 3 issued. Addition of section 7.3 Alternative style of hook, and Figure 15

UK/0126/0019 Rev 4

4 September 2008 Revision 4 issued. Addition of the following case series to table 3: 01, 02, 10, 11, 16, 18, 28, A1, A2, A8, A15, A18, A19, J7, J8, J11, J13, J15 and J18. Table rearranged in numerical order.

UK/0126/0019 Rev 5

12 March 2009 Revision 5 issued. Modification to Section 7.1.8: Addition of manufacturer’s alternative identifications: i) UGR

ii) TOP CRAFT

iii) SKILLS

14

UK/0126/0019 Rev 6

11 June 2009 Revision 6 issued. Addition of Section 7.1.1.1 Modification to Section 7.1.8 to include Addition of manufacturer’s alternative identification:

i) VIP-TEC Which is the identification of : ARMETAL VE DOVME EL ALETLERI SAN.VE TIC.A.S BAGLAR ICI CAD.NO.:85 K.1/2 FIRUZKOY/AVCILAR ISTANBUL TURKEY Addition of Section 7.1.11

UK/0126/0019 Rev 7

12 November 2009 Revision 7 issued. Modification to Section 7.1.2: Addition of Series 78 case Addition of Figures 16, 17 & 18

UK/0126/0019 Rev 8

24 March 2010 Revision 8 issued. Modification to Section 7.1.8: Addition of manufacturer’s alternative identification “NoRa”

UK/0126/0019 Rev 9

13 April 2010 Revision 9 issued. Modification to Section 7.1.8: Addition of manufacturer’s alternative identification “BRüDER MANNESMANN” and

brand

UK/0126/0019 Rev 10

07 January 2011 Revision 10 issued. Modification to layout of Table 1 in section 7.1. Section 7.1 - Addition of models: 3.5m*12.5mm; 3.5m*16mm; 3.5m*19mm; 5.5m*16mm; 5.5m*19mm; 5.5m*25mm; 7.5m*25mm to Modification to layout of Table 2 in section 7.1.1. Section 7.2 addition to include:

• identification by the model series number

• 15m fibreglass tape measure. Addition of Figures 19, 20 & 21

UK/0126/0019 Rev 11

26 January 2011 Revision 11 issued. Modification to Section 7.1.8: Addition of manufacturer’s alternative identification;

GO/ON

15

UK/0126/0019 Rev 12

07 July 2011 Revision 12 issued. Modification to Section 7.1.8: Addition of a manufacturer’s two alternative identifications;

i) KLY-TEK

ii) ORIENT Which is the identification of: AKDEMIR MAKINA PAZARLAMA SANAYI VE DIS TICARET LTD.STI. YESILBAYIR MAH. SIMSIR SOK. NO:5 HADIMKOY/ISTANBUL TURKEY

UK/0126/0019 Rev 13

23 March 2012 Revision 13 issued. Addition of a manufacturer’s alternative identification:

Addition of Figure 22

UK/0126/0019 Rev 14

28 March 2012 Revision 14 issued. Addition of the following case series in 7.1.2 Table 3, and Figures 23 - 32: series 62, series 31, series 35, series 11-1 series A44, series 15, series 78-1, series J19, series 08-1, series YJ-09

UK/0126/0019 Rev 15

01 February 2013 Revision 15 issued. Addition of 7.1.12 for two dual marked blades (metric lower scale) Addition of figure 33 Alternative logo in addition to manufacturer logo in section 7.1.8

for::Neill Tools Ltd. Atlas way, Atlas North, Sheffield England.S4 7QQ. Alternative logo in addition to manufacturer logo in section 7.1.8.

With item numbers in section 7.1.13 Alternative logo in addition to manufacturer logo in section 7.1.8

Addition of section 7.4, class I steel blades. Addition of Fig 34. Example of class I blade. Addition of Table numbers to sections: 7.1.10; 7.1.11; 7.1.12; 7.1.13. 7.2 & 7.4

16

UK/0126/0019 Rev 16

23 May 2013 Revision 16 issued. Deletion of section 7.4, class I steel blades. Deletion of Fig 34. Example of class I blade. Alternative logos which are in addition to manufacturer logo in section 7.1.8.

a) Which is the identification of: SGT SANAYI VE TICARI URUNLER DIS TICARET A.S. Dokuz Eylul Mah.Kahramanlar Caddesi No:39 Gaziemir-IZMIR /TURKEY.

b) Which is the identification of: ERA HIRDAVAT LTD.STI. Nato Yolu Caddesi No.71 Y.Dudullu Umraniye-ISTANBUL / TURKEY

c) & Which are the identification of: INANC TRAFO MAK.SAN.-INANC KOSE : Yavuz Sultan Selim Cad.No:36/D Camdibi-Izmir/TURKEY

d) Which is the identification of: YILDIRIM TEKNIK YAPI MALZ.SAN.VE TIC.LTD STI VE TİCARET LTD.ŞTİ, Demirciler sitesi 6.yol no.41, Zeytınburnu, Istanbul,TURKEY.

e)

f)

UK/0126/0019 Rev 17

23 July 2013 Revision 17 issued.

Alternative logo which is in addition to manufacturer logo in section 7.1.8. Case series A1 image added as fig. 34 Addition of the following case series 43, 74, 83, and 98 into section 7.1.2, table 3. Also added to figures list. Figure 24 - case style typing error changed from series 62 to series 31.

17

UK/0126/0019 Rev 18

19 March 2014 Revision 18 issued. Addition of case/reel series numbers (8,1, 85, 3 and 5) in section 7.1.2 - table 3 Addition of section 7.1.14 and table 8 - alternative model numbers for KLY-TEK Addition of section 7.1.15 and table 9 - alternative model numbers for ORIENT Addition of figures 39 - 45, case/reel styles. Renumbered table 9 in section 7.2 to table 10.

UK/0126/0019 Rev 19

12 May 2014 Revision 19 issued.

Alternative logo which is in addition to manufacturer logo in section 7.1.8. Which is the identification of: Sarac Teknik Hirdavat Insaat San Ve Tic Ltd. Sti. Orta Mahalle Burgaz Caddesi No: 11 Tuzla Istanbul Turkey.

UK/0126/0019 Rev 20

02 September 2014 Revision 20 issued Reference to section 7 added to page 1. Addition of:

• manufacturer’s alternative

identification: Tchokko! , which is in addition to manufacturer logo, in section 7.1.8. Which is the identification of :

ANATECH DIS TIC.A.S. Buyukdere Cd. No:163 Kat:7 Sisli/Istanbul-Turkey 34394

• section 7.1.16 Renumbering of the Table (10) in section 7.2 to Table 11.

UK/0126/0019 Rev 21

09 January 2015 Revision 21 issued, Addition of: • model series 71 and 72 into section 7.1.2

and figures 47 and 48. • Manufacturer’s alternative identification:

Hornbach Baumarkt AG, which is in addition to the manufacturer logo, in section 7.1.8.

• Manufacturer’s alternative identification:

SENUKU PREKYBOS CENTRAS UAB, which is in addition to the manufacturer logo, in section 7.1.8.

• 7.1.17 including table 11 Renumbering of Table 11 in section 7.2 to Table 12.

18

UK/0126/0019 Rev 22

02 June 2015 Revision 22 issued Modification of text on page 1 regarding Additional models. Addition of: • model series A60, A61, 45, 73, 21 and 23

into section 7.1.2, and figures 49 - 54.

Amendment to Section 7.1.8, YILTEC is changed to YILTEK.

UK/0126/0019 Rev 23

23 June 2016 Revision 23 issued Section 7.4 and associated figure 55 added

UK/0126/0019 Rev 24

9 September 2016 Revision 24 issued Alternative logos which are in addition to manufacturer logo in section 7.1.8.

Which is the identification of: Metrica spa- Italy Via Grandi 18 - 20097 S.Donat

Which is the identification of: Beta Utensili S.P.A. Via Volta 18 20845 Sovico (MB) - Italy Addition of sections 7.1.18 and 7.4. Section 7.2.1, alternative graduation starts at ring.

UK/0126/0019 Rev 25

30 November 2016 Revision 25 issued Sections 7.1.19, 7.1.20 and 7.2.3 added. Section 7.1.8: Alternative logos, which are in addition to the manufacturer logo;

Which is the identification of:

GUL-ZAN HIRDAVAT ITH.IHR.DAH.TICARET CELIKYURT MAH. DUBAII IS MERKEZI NO.01 NUSAYBIN/TURKEY.

Which is the identification of:

JUMBO-Markt AG Industriestrasse 34 CH-8305 Dietlikon,Switzerland.

Error in section 7.3 corrected, text as in Revision 23 included for section 7.4 and section 7.4 (Revision 24) re-numbered as 7.5 Section 7.4: Table 13 is renumbered to Table 16. Alternative case style 09 added (Figure 60).

19

UK/0126/0019 Rev 26

09 March 2017 Revision 26 issued Modification to Section 7.1.8:

Addition of the following markings which are in addition to manufacturer logo:

KRL, which is the identification of: KAROGLU MUHENDISLIK YAPI SAN.DIS.TICARET LTD.STI. Mahmut Bey Mah.Isdoc Toptancilar Car.25 Ada No.81/83, Bagcilar - Istanbul – TURKIYE

PROTECO, which is identification of: PROTECO Naradi s.r.o Radlicka 2487/99 150 00Praha 5-Smichov

Addition of section 7.1.21. Subsequent table numbers are amended accordingly

UK/0126/0019 Rev 27

01 June 2017 Revision 27 issued Addition of Section 7.6 Wording in section 5.1.1 amended align with the text in the Directive.

UK/0126/0019 Rev 28

26 July 2017 Revision 28 issued Addition:

Section 7.1.2 , case Series A50, Series A51, Series A52, Series A53 & Series A54.

Section 7.1.8 Alternative logo markings, which are in addition to the manufacturer logo;

and is the identification of:

OMRAN DEMIR, SELAHADDIN EYYUBI MAH. SEHER SK./38 MARDIN/NUSAYBIN 052, TURKIYE

and ZIMAK EL ALETLERI/MAZHAR ZIYANEK MAHMUT BEY MAH.ISTOC TOPTANCILAR CARSISI 28 YOL SOKAK 25 A DA NO.173-75 BAGCILAR/ISTANBUL TURKIYE

which is the identification of:

VARO-Vic. Van Rompuy n.v JOSEPH VAN INSTRAAT 9 2500 LIER (BELGIUM)

Figures 61 & 62 Amendment to list in Section 8 ILLUSTRATIONS

20

UK/0126/0019 Rev 29

10 October 2017 Revision 29 issued Addition of:

Section 7.1.8 Alternative logo, which is in addition to the manufacturer logo;

and is the identification of:

IMPORTE POUR IPH Brands, 31 rue de la baume, 75008, PARIS, France.

Section 7.7 Alternative model identifications UK/0126/0019 Rev 30

05 March 2018 Addition to: • Table 3, for Case Series A50W, A58W and

A57. • Section 7.1.8

Alternative logo markings, which are in addition to the manufacturer logo,

, which is the identification of:

AKGUL ITHALAT RIDVAN AKA MAHMUTBEY MAH.2445 SK.NO:23, BAGCILAR/ISTANBUL

and

which is the identification of:

MUHITTIN CAKIROGLU HIRD.INS.GIDA.TUR.SAN.TIC.LTD.STI KARACAOGLAN MAH.6166 SOK NO:23/B, ISIKENT/BORNOVA/IZMIR,TURKEY

• Figures 63 -65 • Section 7.8 and Figure 66. Certificate renewed for further 10 years.

UK/0126/0019 Rev 31

20 March 2018 New pictures. Added to Figure 65 Section 7.1.8 added:

Alternative logo markings, which are in addition to the manufacturer logo,

or which are the identifications of: HAMDİ KÜÇÜK ÇELİK MAKİNA TİC. VE SAN. A.Ş. , 1145/10-11 SOKAK NO: 17-18 Yenisehir IZMIR Turkey.

UK/0126/0019 Rev 32

01 June 2018 • Additional manufacturer logo "HORNBACH" in Revision 21 of the History table.

• Additional manufacturer logo "FASTMAX" in Revision 31 of the History table.

21

UK/0126/0019 Rev 33

19 July 2018 • Section 5.1.2, addition of model code Y; • Section 7.1, addition of models with

nominal width 27mm; • Section 7.1.8, addition of alternative logo marking, which is in addition to the manufacturer logo;

i). which is the identification of:

KUPA HIRDAVAT Add: SELIM AKDENIZ ISTOC SANAYI

SITESI 26 ADA NO:122-124 BAGCILAR/ISTANBUL

ii). which is the identification of:

ZIMAK EL ALETLERI The address is updated from Revision 25

to new address:

MAHMUT BEY MAH.ISTOC TOPTANCILAR CARSISI 28 YOL SOKAK 25 ADA NO.173-175 BAGCILAR/ISTANBUL

iii). which is the identification of:

OZKAYA HIRDAVAT TICARET TOPTAN-PERAKENDE HIRDAVAT

Add: KOCAVEZIR MAH.KOCAVEZIR IS MRK.UST ZEMIN KAT NO:192/ADANA BESOCAK

iv). which is the identification of:

CMC EL ALETLERI HIRDAVAT ELEK YAPAY CICEK TAR URN. INS. TAAH. ITH. IHR. SAN.VE.TIC.LTD. STI

Add: YESILOBA MAH.SEYHAN TIC.MRK B BLOK NO:16 SEYHAN/ADANA

• Addition of Section 7.9 and Table 21.

22

UK/0126/0019 Rev 34

24 October 2019 Addition to: • Section 7.1.8: addition of alternative logo

markings, which is in addition to the manufacturer logo;

i) which is the identification of: UNIFIRST Add: ZI LA BORIE 2, 43120 MONISTROL SUR LOIRE, FRANCE

ii) which is the identification of: STARTRADE ITALY SRL, Add: VIA VINCENZO TINEO 97,00172, ROMA, Italy.

iii) which is the identification of: Amazon EU SARL, Add: Niederiassung Deutschland

iv) which is the identification of: UAB Kesko Senukai Lithuania, Add:Islandijos pl. 32 B, 51500 Kaunas, Lithuania

v) which are the identifications of:

vi) or which are the identifications of:

23

vii) , or ,

or ,

or , or

, or

which are the identifications of

• Sections 7.10 and 7.11 • Figures 67 – 77.

UK/0126/0019 Rev 35

22 July 2020 Addition to: • Section 7.1.8: addition of alternative logo

markings, which is in addition to the manufacturer logo;

v) which is the identification of: GUVEN ITHALAT IHRACAT VE TIC LTD STI Add: ORNEK SANAYI SIT. 8 NOLU CAD. NO:18 SEHITKAMIL /GAZIANTEP /TURKEY

vi) which is the identification of: ZIMAK PROMOSYON KIRTASIYE SAN.VE TIC. LTD. STI Add: ISTOC MAHMUTBEY MH.2499 SK.NO:36 BAGCILAR/ISTANBUL TAX NO:9981069959.

24

Figure 1 Example of the pattern

Figure 2 Case style – 03 series






25





Figure 12 Case style – HF 77x series Figure 13 Case style – A18

GW8A18X series

Figure 14 Dual graduated blade model

26

Figure 15 Alternative style of hook

Figure 16 Case style – Series JGW-Y

Figure 17 Case style – Series J5

Figure 18 Case style – Series78

27

Figure 19 Case style – Series 02



Figure 22 Case style – Series A25

28

Figure 23 Case style –Series 62


Figure 25 Case style –Series 35

Figure 26 Case style –Series 11-1

Figure 27 Case style –Series A44 Figure 28 Case style –Series 15

29


Figure 30 Case style –Series J19


Figure 32 Case style –Series YJ-09

Figure 33 Example of dual blade design (metric lower scale)

Figure 34 Case style - Series A1 Figure 35 Case style - Series 43

30

Figure 36 Case style - Series 74 Figure 37 Case style - Series 83

Figure 38 Case style - Series 98


31



32





33

Figure 49 Case Style - Series A60 Figure 50 Case Style - Series A61

Figure 51 Case Style - Series 45 Figure 52 Case Style - Series 73

Figure 53 Case Style - Series 23 Figure 54 Case Style - Series 21

34

Figure 55 3 m fibreglass blade

Figure 56 Case Style - Series 93

Figure 57 Case Style - Series J20 Figure 58 Case Style - Series J22

35

Figure 59 Case Styles A62/A63/A65

Figure 60 Case Style 09 (alternative)

A50 A51 A52 A53 A54

Figure 61 Examples of Case Styles

Figure 62 BOSCH Figure 63 Case Style - Series A50W

36

Figure 64 Case Style - Series A58W

Figure 65 Case Style - Series A57

Figure 66 Case Style - Series 25 Figure 67 Case Style - Series GW-L107S

37

Figure 68 Case Style - Series 09 Figure 69 Case Style - Series 89-1

Figure 70 Case Style - Series 85-1 Figure 71 Case Style - Series B3-1

Figure 72 Case Style - Series B3-2 Figure 73 Case Style - Series A74

38

Figure 74 Case Style - Series A75 Figure 75 Case Style - Series GW-D040

Figure 76 Case Style - Series 07 Figure 77 Case Style - Series 21 Crown copyright 2020 NMO The Office for Product Safety and Standards Department for Business, Energy and Industrial Strategy This material may be freely reproduced except for sale

In accordance with the requirements of the Measuring Instruments Regulations 2016 (S.I. 2016 No. 1153) which implement, in the United Kingdom, Council Directive 2014/32/EU, this EU-type examination certificate has been issued to:1 Konfoong RoadYangming Technology Industrial ParkYuyao CityDescriptive Annex

7 ALTERNATIVES

2020-07-22T12:44:19+0100Grégory Glas

EU type-examination certificate UK/0126/0019 Revision 35 · 2014/32/EU. 2 DESCRIPTION OF THE...

Documents

Transcript of EU type-examination certificate UK/0126/0019 Revision 35 · 2014/32/EU. 2 DESCRIPTION OF THE...