Contents

Bathrooms & Kitchens

page 4 - Outline Super Mirror, central heating (electric also available)

page 6 - Ron with towel rails, central heating

page 10 - Outline with towel rails, central heating(electric also available)

page 13 - Towel Clip, electric

Eskimo Home

page 17 - Ron wall mounted, central heating

page 21 - Leggy Ron, floor mounted, central heating

page 25 - Outline, central heating(electric also available)

page 30 - Colours, finishes and taking care of your Eskimo

page 32 - Radiator colour chart

page 34 - Technical data

page 35 - Frequently Asked Questions

page 36 - Delta T and correction factors

1

Outline Super Mirror Get Up:radiator size H 1500mm x W 430mm x D50mm

A bit about EskimoAt Eskimo, our grand plan is to design and make the world’s best radiators and associated hot things. In these pages you’ll see some of the fruits of our labour at the drawing board and on the test rig, relentlessly knocking on the gates of radiator heaven. If we have one underlying principle at Eskimo it’s this - we want to be proud of what we design, make and sell.

For our radiator products this means that we want you to look at Eskimo ranges and be blown away by their gorgeous simple elegant lines. But we also want your installer (or you if you’re a handy sort) to find the job of installation straightforward and well explained. We want you, our customer, to be warmed by your Eskimo throughout the coldest of winters, and smile at it in the summer sunshine. We want you to forget about it when you go on holiday, then fondly remember you own it when you come home.

Most of all we would like to think that when you sell your house and move on, whoever moves in will feel the same about the radiators they inherit. For that, we believe, is the measure of good product design. It’s not fashion (and we’re not knocking fashion), it’s not art, but it is something that can be appreciated by anybody at any time, because it quite simply works: aesthetically and practically.

Of course the real trick is to do this without coming up with some personality devoid piece of inoffensive sameness. Do we manage it? Only time will tell, and that’s what keeps us so excited by what we do.

Eskimo continues to develop engaging, beautifully engineered products with a sense of humour, captivating design minded consumers and professionals within the industry alike.

And every Eskimo product is designed and manufactured in the UK – who else can say that these days?

Bathrooms & Kitchens

3

Leggy Ron, in Polished Aluminium:radiator size H 307mm x W1508mm x D 110mm

2

Outline Super Mirror, central heating

*All heat outputs are calculated in accordance with BS EN442. For an explanation of Delta T (Δt), and to calculate performance at different Delta Ts, please see the technical information on page 36. To convert Watts to BTU/hr multiply the figure shown above for watts by 3.412,

Valves must be ordered separately. Hidden manual valves are available for an additional £102 + VAT per radiator - see installation details and drawings on page 34. Thermostatic valves are not available as standard with this option. If thermostatic control is required with hidden valves please contact Eskimo Technical Sales.

Towel hanging rails (5mmx 40mm bars) can be added to all mirror radiators: £96 for the first rail, £52 for subsequent rails. Test Pressure: 7.5 bar. Maximum Operating Pressure: 5 bar. Maximum Operating Temperature: 95ºC. Connections: 1/2” BSP Bottom (underside of radiator) opposite end tappings - use angle valves for pipes coming from walls and straight valves for pipes coming up from floor.

Get up, output and prices Items in bold are held in stock for quick delivery.

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C Price exc. VAT (X) (Y) (Z) (Watts)* (Watts)* 24180S-SM 1800 240 50 846 668 £70224180D-SM 1800 240 95 1691 1336 £824 43150S-SM 1500 430 50 1390 1098 £91743180S-SM 1800 430 50 1691 1336 £1,02243180D-SM 1800 430 95 2959 2338 £1,206

Get up, technical

Base part no. Water Volume Dry Weight Distance Wall Pipe Centres Distance Wall Bracket Centres (litres) (kg) to front face (B) mm to pipe centre (D) mm (A) mm (C) mm 24180S-SM 0.6 15.3 75 174 49 9324180D-SM 0.9 23.5 120 174 72 14743150S-SM 1.0 22.5 75 364 49 27943180S-SM 1.1 26.8 75 364 49 27943180D-SM 1.7 38.1 120 364 72 294

You Square, output and prices

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C Price exc. VAT (X) (Y) (Z) (Watts)* (Watts)* 6060S-SM 600 600 50 730 577 £6026060D-SM 600 600 95 1339 1058 £809

You Square, technical

Base part no. Water Volume Dry Weight Distance Wall Pipe Centres Distance Wall Bracket Centres (litres) (kg) to front face (B) mm to pipe centre (D) mm (A) mm (C) mm6060S-SM 0.8 13.4 75 534 49 4656060D-SM 1.0 18.9 120 534 72 490

Lie Down, output and prices

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C Price exc. VAT (X) (Y) (Z) (Watts)* (Watts)* 15043S-SM 430 1500 50 1186 937 £1,00615043D-SM 430 1500 95 2292 1811 £1,300

Lie Down, technical

Base part no. Water Volume Dry Weight Distance Wall Pipe Centres Distance Wall Bracket Centres (litres) (kg) to front face (B) mm to pipe centre (D) mm (A) mm (C) mm15043S-SM 1.6 22.9 75 1434 49 651 (3 brackets)15043D-SM 2.1 32.8 120 1434 72 686 (3 brackets)

Eskimo’s range of beautiful stainless steel mirror-finish radiators for beautiful people. A high performance radiator that is so highly polished you can fully admire yourself every time you walk by

Outline’s reflective radiators

Available in a wide range of standard sizes and formats

Super-high polished stainless steel gives near-perfect reflection*

Hard wearing and easily cleaned

Anti-mist

Bespoke sizes can be made to suit any space

High heat outputs

Low water volume and diverter fitted as standard means rapid warm up which is perfect for low temperature heating systems such as heat pumps

Available in electric and hot water versions

Hidden valves can be specified so that the mirror panel appears to “float” just off the wall with the radiator function disguised. This will require the radiator front panel to be extended by 100mm – so you will need to add 100mm to the height of the radiator shown in the brochure

*There may be some distortion in the panel, particularly around the edges. It won’t therefore compete with a glass mirror for absolute perfection, but assuming you’re perfect to start with, we bet you could do with a couple of extra curves?

5

Outline Super Mirror Get Up:radiator size H 2000mm x W 430mm x D50mm

4

*All heat outputs are calculated in accordance with BS EN442. For an explanation of Delta T (Δt ) and to calculate performance at different Delta Ts please see the technical information on page 36. To convert Watts to BTU/hr multiply the figure shown above for watts by 3.412. Valves must be ordered separately. Test Pressure: 7.5 bar. Maximum Operating Pressure: 5 bar. Maximum Operating Temperature: 95ºC. Connections: 1/2” BSP Bottom (side of radiator) opposite end tappings - use angle valves for pipes coming from walls and also from the floor.

Ron with towel rails, output and prices, standard colours Items in bold are held in stock for quick delivery.

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C Price exc. VAT (X) (Y) (Z) (Watts)* (Watts)* Standard Standard Colours Standard Colours Colours RON-6-624-TR1 600 624 170 1382 1092 £865 RON-10-364-TR1 1000 364 170 1274 1006 £749 RON-10-364-TR2 1000 364 170 1274 1006 £849 RON-10-572-TR1 1000 572 170 2002 1582 £1,029 RON-10-572-TR2 1000 572 170 2002 1582 £1,129 RON-18-416-TR1 1800 416 170 2416 1909 £1,148 RON-18-416-TR2 1800 416 170 2416 1909 £1,248 RON-18-416-TR3 1800 416 170 2416 1909 £1,348

Ron with towel rails, output and prices, polished aluminium Base part no. Height mm Length Depth mm Output at Δt 60°C Output at Δt 50°C Price exc. VAT (X) (Y) (Z) (Watts)* (Watts)* Polished Polished Polished Aluminium Aluminium AluminiumRON-6-624-TR1 600 624 170 1106 874 £832RON-10-364-TR1 1000 364 170 1019 805 £761RON-10-364-TR2 1000 364 170 1019 805 £861RON-10-572-TR1 1000 572 170 1602 1266 £1,044RON-10-572-TR2 1000 572 170 1602 1266 £1,144 RON-18-416-TR1 1800 416 170 1928 1523 £1,172RON-18-416-TR2 1800 416 170 1928 1523 £1,272RON-18-416-TR3 1800 416 170 1928 1523 £1,372

Ron with towel rails, technical, all finishes

Base part no. Water Volume Dry Pipe Bracket Distance top Centres top Centres 2nd (litres) Weight Centres Centres of radiator to rail to 2nd rail to 3rd (kg) (A) mm middle of top rail (C) mm rail (C) mm rail (B) mm RON-6-624-TR1 5.2 24.3 n/a 468 60 RON-10-364-TR1 5.1 22.5 n/a 208 250 RON-10-364-TR2 5.1 23.5 n/a 208 60 440RON-10-572-TR1 8.0 34.9 n/a 416 250 RON-10-572-TR2 8.0 36.0 n/a 416 60 440RON-18-416-TR1 10.5 43.7 n/a 260 450 RON-18-416-TR2 10.5 44.7 n/a 260 60 840RON-18-416-TR3 10.5 45.7 n/a 260 60 540 600

7

Ron with towel rails, central heatingEskimo’s towel rails are different. The towel rail on the front has a separate function to the radiator at the back – one warms your towels, the other heats your room

Eskimo’s range of elliptical aluminium towel rail radiators

The problem with fitting most towel rails to heat your bathroom or kitchen is that they only provide their full heat output so long as you don’t hang towels on them. Hanging a towel over the bars of a towel rail is like putting a tea cosy on a tea pot – it keeps the heat in, meaning a cold bathroom. Eskimo’s towel rails are different: the towel rail on the front has a separate function to the radiator at the back – one warms your towels, the other heats your room. The twin functions of the design are not compromised by each other

Ron is a modular aluminium high output radiator

The matching elliptical towel rail is proportionately matched to the elliptical section of the radiator

Available in a range of three standard heights with up to three towel rails

Other sizes available on request

Three metal finishes plus a range of standard colours - special colours available on request

Other connection positions available – see page 34 for connection options

Ron in Polished Aluminium, with one towel rail:radiator size H 1000mm x W 572 x D 110mm

6

Eskimo’s range of flat panel towel rail radiators are different: one warms your towels, the other heats your room. The twin functions of the design are not compromised by each other

Outline Get Up in Brushed Stainless Steel, with towel rail: radiator size H 2000mm x W 240mm x D 95mm

98

Get up with towel rails, output and prices Items in bold are held in stock for quick delivery.

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C Price Finish (X) (Y) (Z) (Watts)* (Watts)* exc. VAT 43100S-B-TR1 1000 430 50 888 702 £724 Brushed43100S-B-TR2 1000 430 50 888 702 £776 Brushed43100S-C-TR1 1000 430 50 888 702 £774 Colour43100S-C-TR2 1000 430 50 888 702 £826 Colour43180S-B-TR1 1800 430 50 1691 1336 £957 Brushed43180S-B-TR2 1800 430 50 1691 1336 £1,009 Brushed 43180S-B-TR3 1800 430 50 1691 1336 £1,065 Brushed43180S-SM-TR1 1800 430 50 1691 1336 £1,170 Super Mirror43180S-C-TR1 1800 430 50 1691 1336 £1,025 Colour43180S-C-TR2 1800 430 50 1691 1336 £1,077 Colour (white in stock)43180S-C-TR3 1800 430 50 1691 1336 £1,129 Colour43180D-B-TR1 1800 430 95 2959 2338 £1,111 Brushed43180D-B-TR2 1800 430 95 2959 2338 £1,163 Brushed43180D-B-TR3 1800 430 95 2959 2338 £1,215 Brushed43180D-C-TR1 1800 430 95 2959 2338 £1,193 Colour43180D-C-TR2 1800 430 95 2959 2338 £1,245 Colour43180D-C-TR3 1800 430 95 2959 2338 £1,297 Colour

Get up with towel rails, technical

Base part no. Water Dry Distance Pipe Distance Bracket Distance top of Centres top Centres Finish Volume Weight wall to Centres to pipe Centres radiator to middle rail to 2nd 2nd rail (litres) (kg) front (B) mm centre (D) mm of top rail rail (F) mm to 3rd of rail (C) mm (E) mm rail (A) mm (G) mm43100S-B-TR1 0.7 15.4 120 364 49 279 70 Brushed43100S-B-TR2 0.7 15.4 120 364 49 279 70 360 Brushed43100S-C-TR1 0.7 15.4 120 364 49 279 70 Colour43100S-C-TR2 0.7 15.4 120 364 49 279 70 360 Colour43180S-B-TR1 1.1 26.8 120 364 49 279 420 Brushed43180S-B-TR2 1.1 26.8 120 364 49 279 420 480 Brushed43180S-B-TR3 1.1 26.8 120 364 49 279 420 420 420 Brushed 43180S-SM-TR1 1.1 26.8 120 364 49 279 420 Super Mirror43180S-C-TR1 1.1 26.8 120 364 49 279 420 Colour43180S-C-TR2 1.1 26.8 120 364 49 279 420 480 Colour (white in stock)43180S-C-TR3 1.1 26.8 120 364 49 279 420 420 420 Colour43180D-B-TR1 1.7 38.1 165 364 72 294 420 Brushed43180D-B-TR2 1.7 38.1 165 364 72 294 420 480 Brushed43180D-B-TR3 1.7 38.1 165 364 72 294 420 420 420 Brushed43180D-C-TR1 1.7 38.1 165 364 72 294 420 Colour43180D-C-TR2 1.7 38.1 165 364 72 294 420 480 Colour43180D-C-TR3 1.7 38.1 165 364 72 294 420 420 420 Colour

You square with towel rails, output and prices

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C Price Finish (X) (Y) (Z) (Watts)* (Watts)* exc. VAT 6060S-B-TR1 600 600 50 730 577 £602 Brushed6060D-B-TR1 600 600 95 1339 1058 £776 Brushed6060S-C-TR1 600 600 50 730 577 £643 Colour (white in stock)6060D-C-TR1 600 600 95 1339 1058 £831 Colour (white in stock)

You square with towel rails, technical

Water Dry Distance Wall Pipe Distance Wall Bracket Distance top of Finish Base part no. Volume Weight to front of Centres to pipe centre Centres radiator to middle (litres) (kg) rail (A) mm (B) mm (C) mm (D) mm of top (E) mm 6060S-B-TR1 0.8 13.4 120 534 49 465 70 Brushed 6060D-B-TR1 1.0 18.9 165 534 72 490 70 Brushed6060S-C-TR1 0.8 13.4 120 534 49 465 70 Colour (white in stock)6060D-C-TR1 1.0 18.9 165 534 72 490 70 Colour (white in stock)

Outline with towel rails, central heatingOutline with towel rails, central heating

*All heat outputs are calculated in accordance with BS EN442. For an explanation of Delta T (Δt ) and to calculate performance at different Delta Ts please see the technical information on page 36. To convert Watts to BTU/hr multiply the figure shown on page 11 for watts by 3.412. Valves must be ordered separately. Hidden manual valves are available for an additional £102 + VAT per radiator - see installation details and drawings on page 34. Thermostatic valves are not available as standard with this option. If thermostatic control is required with hidden valves please contact Eskimo Technical Sales. Towel hanging rails (5mmx 40mm bars) can be added to all outline radiators: £96 for the first rail, £52 for subsequent rails. Test Pressure: 7.5 bar. Maximum Operating Pressure: 5 bar. Maximum Operating Temperature: 95ºC. Connections: 1/2” BSP Bottom (underside of radiator) opposite end tappings - use angle valves for pipes coming from walls and straight valves for pipes coming up from floor.

The problem with fitting most towel rails to heat your bathroom or kitchen is that they only provide their full heat output so long as you don’t hang towels on them. Hanging a towel over the bars of a towel rail is like putting a tea cosy on a tea pot – it keeps the heat in, meaning a cold bathroom. Eskimo’s towel rails are different – the towel rail on the front has a separate function to the radiator at the back – one warms your towels, the other heats your room. The twin functions of the design are not compromised by each other.

Outline is a modular aluminium high output radiator with a separate stainless steel or powder coated steel front fascia panel

Twin function - acts as both a high performance radiator and a towel warmer.The matching flat bar towel rail is aesthetically and proportionately matched to the radiator

Available in a range of three standard heights and two standard depths – an infinite range of special sizes are available on request

Two metal finishes plus a range of standard colours – special colours available on request

Other connection positions available - see page 34 for connection options

Super high polished stainless steel finish gives near-perfect reflection*

Hard wearing and easily cleaned

Anti-mist

Bespoke sizes can be made to suit any space

High heat outputs

Low water volume and diverter fitted as standard means rapid warm up and perfect for low temperature heating systems such as heat pumps

Available in electric and hot water versions

Hidden valves can be specified so that the mirror panel appears to “float” just off the wall with the radiator function disguised. This will require the radiator front panel to be extended by 100mm – so you will need to add 100mm to the height of the radiator shown in the brochure.

*There may be some distortion in the panel, particularly around the edges. It won’t therefore compete with a glass mirror for absolute perfection, but assuming you’re perfect to start with, we bet you could do with a couple of extra curves?

1110

Outline Oblong in bespoke colour Champagnewith one towel rail and hidden valves:radiator size H 600mm x W 800mm x D95mm

Eskimo’s stationery inspired towel warmer

13

The paperclip deserves respect and admiration for its role in holding things together in the office and in our opinion it’s far superior to the staple. Indeed we love it so much we came up with a giant version that not only looks every bit as good as a paperclip (is there any greater accolade?) AND it also warms towels!

Towelclip boasts low energy usage and is available in chrome.

Towelclip won’t heat your bathroom though: its sole function (other than looking brilliant) is to warm towels, pants or anything else you hang on it. What that does mean is that you can leave it on all year round and it won’t make you sweat.

Specifications:- Electric only- Height 250mm- Length 815mm- Depth 85mm- Rating 45 watts- Supply 230 volts- Suitable for bathroom use- For wiring into a fused spur- Stock item for next day delivery

Price - £345 + Vat

The electric Towelclip

12

Eskimo Home

Leggy Ron, in RAL7016 Anthracite Grey:radiator size H 307mm x W1508mm x D110mm

14 15

Eskimo’s range of elliptical aluminium radiators

Eskimo’s Ron range crosses the boundary between contemporary and classic. Its styling cues include 1950’s aircraft technology and the traditional schoolhouse radiator. As a result it will happily sit with most interior schemes from ultra-modern to period.

Ron is a modular aluminium high output radiator: allowing you to add as many sections as you need from 1 to 50

Available in a range of six standard heights. Fit long, low 200mm high versions underneath windows or shelving; or fit space saving 1.8m tall and narrow versions

Three metal finishes plus a range of standard colours – special colours available on request

Other connection positions available – see page 34 for connection options

16 17

Ron, wall mounted, output and prices, standard colours Items in bold are held in stock for quick delivery.

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C Price exc. VAT (X) (Y) (Z) (Watts)* (Watts)* Standard Colour Standard Colour Standard ColourRON-2-1144 200 1144 110 959 758 £898RON-2-1508 200 1508 110 1264 999 £1,155RON-4-624 400 624 110 974 769 £616 RON-4-832 400 832 110 1299 1026 £813 RON-4-1144 400 1144 110 1786 1411 £1,083RON-4-1508 400 1508 110 2355 1860 £1,390 RON-6-624 600 624 110 1382 1092 £765RON-6-1144 600 1144 110 2534 2002 £1,338RON-6-1508 600 1508 110 3341 2639 £1,719RON-15-208 1500 208 110 1032 815 £490RON-15-312 1500 312 110 1548 1223 £701RON-15-416 1500 416 110 2064 1631 £882RON-15-520 1500 520 110 2580 2038 £1,093RON-18-208 1800 208 110 1208 954 £585RON-18-260 1800 260 110 1510 1193 £694RON-18-312 1800 312 110 1812 1431 £802RON-18-416 1800 416 110 2416 1909 £1,048

Ron, wall mounted, output, metal finishes

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C (X) (Y) (Z) (Watts)* (Watts)* All Metal Finishes All Metal Finishes (Polished/Matt/Gold) (Polished/Matt/Gold)RON-2-1144 200 1144 110 767 606 RON-2-1508 200 1508 110 1012 799 RON-4-624 400 624 110 780 616 RON-4-832 400 832 110 1039 821 RON-4-1144 400 1144 110 1428 1129 RON-4-1508 400 1508 110 1884 1488 RON-6-624 600 624 110 1106 874 RON-6-1144 600 1144 110 2028 1602 RON-6-1508 600 1508 110 2673 2112 RON-15-208 1500 208 110 826 653 RON-15-312 1500 312 110 1238 978 RON-15-416 1500 416 110 1651 1304 RON-15-520 1500 520 110 2064 1631 RON-18-208 1800 208 110 964 762 RON-18-260 1800 260 110 1205 953 RON-18-312 1800 312 110 1446 1142 RON-18-416 1800 416 110 1928 1523

Ron, wall mounted, prices, metal finishes Ron, wall mounted, technical

Base part no. Price exc. VAT Price exc. VAT Price exc. VAT Water volume Dry Pipe Bracket Polished Matt Gold (litres) weight Centres Centres Aluminium Aluminium (Kg) (A) mmRON-2-1144 £878 £1,109 £1,209 3.0 17.8 n/a 1092 RON-2-1508 £1,129 £1,433 £1,562 3.9 23.5 n/a 1456RON-4-624 £594 £749 £816 3.4 16.5 n/a 572RON-4-832 £784 £989 £1,079 4.5 22.0 n/a 780RON-4-1144 £1,042 £1,325 £1,444 6.2 30.3 n/a 1092RON-4-1508 £1,334 £1,707 £1,861 8.2 39.9 n/a 1456RON-6-624 £732 £915 £997 5.2 23.3 n/a 572RON-6-1144 £1,274 £1,610 £1,775 9.5 42.7 n/a 1092RON-6-1508 £1,633 £2,075 £2,262 12.5 56.3 n/a 1456RON-15-208 £505 £586 £639 4.4 18.0 n/a 156RON-15-312 £718 £840 £915 6.6 26.9 n/a 260RON-15-416 £901 £1,063 £1,159 8.7 35.9 n/a 364RON-15-520 £1,114 £1,317 £1,435 10,9 44.9 n/a 468RON-18-208 £605 £698 £761 4.4 21.4 n/a 156RON-18-260 £714 £831 £906 5.5 26.7 n/a 208RON-18-312 £824 £964 £1,051 6.6 32.0 n/a 260RON-18-416 £1,072 £1,259 £1,373 8.7 42.7 n/a 364

Ron, wall mounted, central heating

Ron in RAL7002 Olive Grey:radiator size H 400mm x W 1976mm x D 110mm

*All heat outputs are calculated in accordance with BS EN442. For an explanation of Delta T (Δt) and to calculate performance at different Delta Ts please see the technical information on page 36. To convert Watts to BTU/hr multiply the figure shown above for watts by 3.412. Valves must be ordered separately. Test Pressure: 7.5 bar. Maximum Operating Pressure: 5 bar. Maximum Operating Temperature: 95ºC. Connections: 1/2” BSP Bottom (side of radiator) opposite end tappings - use angle valves for pipes coming from either the walls or up from the floor.

Ron in Matt Aluminium: radiator size H 1500mm x W 260mm x D110mm

Ron in Gold:radiator size H 400mm x W 1040 mm x D110mm

Ron in Polished Aluminium:radiator size H 600mm x W 416 mm x D110mm

Ron in Polished Aluminium:radiator size H 400mm x W 1040 mm x D110mm

18 19

Eskimo’s Ron range can also stand on its own two (or three or four) feet

Leggy Ron in Polished Aluminium:radiator size H 307mm x W1508mm x D 110mm

20 21

Recognising that many installation situations require a floor mounted rather than a wall mounted radiator, we at Eskimo have released this version of our best selling Ron radiator.

As a design, Ron, among modern radiators, is uniquely suited to floor mounting due to the fact that it is completely symmetrical without anysuperfluous parts at the back of the radiator to spoil the clean lines. It therefore lends itself to installation in any setting where both sides of the radiator are on show, such as in conservatories, or in shop or office windows.

Available in a range of three standard heights: 200mm, 400mm and 600mm

Three metal finishes plus a range of standard colours

Great for mounting under benches and seating, for warm winter bottoms

Perfect for mounting in front of full length windows

Ideal for rooms where sloping or curved walls prevent the use of wall mounted radiators

An excellent way of avoiding damage to delicate wall coverings: from hanging radiators on expensive wallpapers, oak panelling in listed buildings or high skirting boards in period homes

Leggy Ron, floor mounted, output and prices, standard colours

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C Price exc. VAT (X) (Y) (Z) (Watts)* (Watts)* Standard Colour Standard Colour Standard ColourRON-2-832-FM 200 832 110 698 551 £756RON-2-1144-FM 200 1144 110 959 758 £993RON-2-1508-FM 200 1508 110 1264 999 £1,298 RON-4-624-FM 400 624 110 974 769 £711 RON-4-832-FM 400 832 110 1299 1026 £908RON-4-1092-FM 400 1092 110 1705 1347 £1,175 RON-4-1508-FM 400 1508 110 2355 1860 £1,533RON-6-624-FM 600 624 110 1382 1092 £860RON-6-832-FM 600 832 110 1843 1456 £1,125RON-6-1092-FM 600 1092 110 2419 1911 £1,404RON-6-1508-FM 600 1508 110 3341 2639 £1,909

Leggy Ron, floor mounted, output and prices, all finishes

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C (X) (Y) (Z) (Watts)* (Watts)* All Metal Finishes All Metal Finishes (Polished, Matt, Gold) (Polished, Matt, Gold)RON-2-832-FM 200 832 110 558 441 RON-2-1144-FM 200 1144 110 767 606 RON-2-1508-FM 200 1508 110 1012 799 RON-4-624-FM 400 624 110 780 616 RON-4-832-FM 400 832 110 1039 821 RON-4-1092-FM 400 1092 110 1364 1078 RON-4-1508-FM 400 1508 110 1884 1488 RON-6-624-FM 600 624 110 1106 874 RON-6-832-FM 600 832 110 1475 1165 RON-6-1092-FM 600 1092 110 2028 1602 RON-6-1508-FM 600 1508 110 2673 2112

Leggy Ron, floor mounted, prices, all finishes Leggy Ron, technical, all finishes

Base part no. Price exc. VAT Price exc. VAT Price exc. VAT No. of Water Dry Pipe Total Fixing Polished Matt Gold legs volume weight Centres height Centres Aluminium Aluminium (litres) (Kg) from floor (B) mm (A) mmRON-2-832-FM £740 £934 £1,017 2 2.2 15.7 n/a 307 780 RON-2-1144-FM £971 £1,228 £1,338 2 3.0 20.6 n/a 307 1092RON-2-1508-FM £1,268 £1,611 £1,756 3 3.9 26.3 n/a 307 728 RON-4-624-FM £687 £868 £945 2 3.4 19.3 n/a 507 572 RON-4-832-FM £877 £1,108 £1,208 2 4.5 24.8 n/a 507 780RON-4-1092-FM £1,131 £1,441 £1,570 3 6.0 31.7 n/a 507 520 RON-4-1508-FM £1,473 £1,885 £2,055 3 8.2 42.7 n/a 507 728RON-6-624-FM £687 £1,034 £1,126 2 5.2 26.1 n/a 707 572RON-6-832-FM £1,076 £1,300 £1,416 2 6.9 33.8 n/a 707 780RON-6-1092-FM £1,340 £1,699 £1,852 3 9.0 43.6 n/a 707 520RON-6-1508-FM £1,819 £2,253 £2,456 3 12.5 59.1 n/a 707 728

Leggy Ron, floor mounted, central heating

*All heat outputs are calculated in accordance with BS EN442. For an explanation of Delta T (Δt) and to calculate performance at different Delta Ts please see the technical information on page 36. To convert Watts to BTU/hr multiply the figure shown above for watts by 3.412. Valves must be ordered separately. Test Pressure: 7.5 bar. Maximum Operating Pressure: 5 bar. Maximum Operating Temperature: 95ºC. Connections: 1/2” BSP Bottom (inside of radiator feet) opposite end tappings - use corner valves for pipes coming up from the floor. Fixings: 4 off M8 expanding bolts (RAWL type) are provided with the radiator, suitable for concrete floors. For other floor types the installer will need to ensure that adequate fixing strength is acheived. Any fixings used must be suitable for the weight and height of the radiator and capable of preventing the radiator from being pushed over in normal use. If in doubt consult a qualified engineer.

Leggy Ron in RAL7016 Anthracite Grey:radiator size H 307mm x W1508mm x D110mm

22 23

Eskimo’s range of flat panel radiators – the original flat panel design for lovers of clean lines

Outline is a modular aluminium, high output radiator with a separate stainless steel or powder coated steel front fascia panel

Available in two standard depths and 25 standard sizes

Bespoke sizes available – we make Outline radiators to the nearest millimetre to fit odd spaces and match existing pipe centres, reducing installation costs

Two metal finishes plus a range of standard colours – special colours available on request

Other connection positions available including hidden valves

Super high polished stainless steel finish gives near-perfect reflection on mirror option*

Hard wearing and easily cleaned

Anti-mist

High heat outputs

Low water volume and diverter fitted as standard means rapid warm up and perfect for low temperature heating systems such as heat pumps

Available in electric and hot water versions

Hidden valves can be specified so that the mirror panel appears to “float” just off the wall with the radiator function disguised. This will require the radiator front panel to be extended by 100mm – so you will need to add 100mm to the height of the radiator shown in the brochure

Twin function with optional factory fitted towel rails added: acts as a high performance radiator and towel warmer. The matching flat bar towel rail is aesthetically and proportionately matched to the radiator

*There may be some distortion in the panel, particularly around the edges. It won’t therefore compete with a glass mirror for absolute perfection, but assuming you’re perfect to start with, we bet you could do with a couple of extra curves?

Outline You Square in bespoke colour Chocolate:radiator size H 600mm x W 600mm x D95mm

Outline Get Up in Brushed Stainless Steel:radiator size H 1800mm x W 430mm x D95mm

Outline Lie Down in Brushed Stainless Steel, with special side connections:radiator size H 240mm x W 2000mm x D95mm

Outline Super Mirror Get Up:radiator size H 1500mm x W 430mm x D50mm

24 25

Get up, output and prices, brushed stainless Items in bold are held in stock for quick delivery.

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C Price exc. VAT (X) (Y) (Z) (Watts)* (Watts)* Brushed Stainless24150S 1500 240 50 695 549 £54224150D 1500 240 95 1390 1098 £63343100S 1000 430 50 888 702 £628 43100D 1000 430 95 1554 1228 £729 43180S 1800 430 50 1691 1336 £86143180D 1800 430 95 2959 2338 £1,015

Get up, output and prices, super mirror

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C Price exc. VAT (X) (Y) (Z) (Watts)* (Watts)* Super Mirror24150S 1500 240 50 695 549 £64424150D 1500 240 95 1390 1098 £75143100S 1000 430 50 888 702 £746 43100D 1000 430 95 1554 1228 £86643180S 1800 430 50 1691 1336 £1,022 43180D 1800 430 95 2959 2338 £1,202

Get up, output and prices, standard colours

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C Price exc. VAT (X) (Y) (Z) (Watts)* (Watts)* Standard Colour24150S 1500 240 50 695 549 £58624150D 1500 240 95 1390 1098 £68343100S 1000 430 50 888 702 £678 43100D 1000 430 95 1554 1228 £788 43180S 1800 430 50 1691 1336 £929 43180D 1800 430 95 2959 2338 £1,097

Get up, technical, all finishes

Base part no. Water Dry Distance Pipe Distance Bracket Volume Weight wall to Centres wall to Centres (litres) (kg) front face (B) mm pipe centre (D) mm (A) mm (C) mm 24150S 0.5 13.0 75 174 49 93 24150D 0.8 19.7 120 174 72 147 43100S 0.7 15.4 75 364 49 279 43100D 1.0 21.5 120 364 72 294 43180S 1.1 26.8 75 364 49 279 43180D 1.7 38.1 120 364 72 294

Oblong, output and prices, brushed stainless Items in bold are held in stock for quick delivery.

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C Price exc. VAT (X) (Y) (Z) (Watts)* (Watts)* Brushed Stainless 12060S 600 1200 50 1667 1317 £793

12060D 600 1200 95 3334 2634 £1,077

Oblong, output and prices, super mirror

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C Price exc. VAT (X) (Y) (Z) (Watts)* (Watts)* Super Mirror12060S 600 1200 50 1667 1317 £94212060D 600 1200 95 3334 2634 £1,279

Oblong, output and prices, standard colours

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C Price exc. VAT (X) (Y) (Z) (Watts)* (Watts)* Standard Colour 12060S 600 1200 50 1667 1317 £85712060D 600 1200 95 3334 2634 £1,162

Oblong, technical, all finishes

Base part no. Water Volume Dry Weight Distance Pipe Centres Distance wall Bracket (litres) (kg) wall to front (B) mm to pipe centre centres face (A) mm (C) mm (D) mm12060S 1.6 25.5 75 1134 49 341 12060D 2.1 37.1 120 1134 72 359

You Square, output and prices, brushed stainless

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C Price exc. VAT (X) (Y) (Z) (Watts)* (Watts)* Brushed Stainless 6060S 600 600 50 730 577 £5066060D 600 600 95 1339 1058 £6808080S 800 800 50 1375 1086 £7208080D 800 800 95 2578 2037 £902

You Square, output and prices, super mirror and standard colours

Base part no. Height Length Depth Output at Δt 60°C Output at Δt 50°C Price exc. VAT Price exc. VAT mm (X) mm (Y) mm (Z) (Watts)* (Watts)* Super Mirror Standard Colour6060S 600 600 50 730 577 £602 £5476060D 600 600 95 1339 1058 £809 £7358080S 800 800 50 1375 1086 £855 £7778080D 800 800 95 2578 2037 £1,072 £974

You Square, technical, all finishes

Base part no. Water Volume Dry Weight Distance Pipe Centres Distance wall Bracket (litres) (kg) wall to front (B) mm to pipe centre Centre face (A) mm (C) mm (D) mm6060S 0.8 13.4 75 534 49 465 6060D 1.0 18.9 120 534 72 4908080S 1.2 22.6 75 734 49 6518080D 1.7 33.1 120 734 72 686

Outline, central heating

26 27

Outline, central heating

Lie Down, output and prices, brushed stainless

Base part no. Height mm Length mm Depth mm Output at Δt 60°C Output at Δt 50°C Price exc. VAT (X) (Y) (Z) (Watts)* (Watts)* Brushed Stainless 15024S 240 1500 50 471 372 £67315024D 240 1500 95 910 719 £87315043S 430 1500 50 1186 937 £84715043D 430 1500 95 2292 1811 £1,09520043S 430 2000 50 1660 1311 £1,05220043D 430 2000 95 3082 2435 £1,414

Lie Down, output and prices, super mirror and standard colours

Base part no. Height Length Depth Output at Δt 60°C Output at Δt 50°C Price exc. VAT Price Price mm (X) mm (Y) mm (Z) (Watts)* (Watts)* Brushed stainless exc. VAT exc. VAT Super Standard Mirror Colour15024S 240 1500 50 471 372 £673 £799 £72615024D 240 1500 95 910 719 £873 £1,038 £94415043S 430 1500 50 1186 937 £847 £1,006 £91415043D 430 1500 95 2292 1811 £1,095 £1,300 £1,18220043S 430 2000 50 1660 1311 £1,052 £1,251 £1,13720043D 430 2000 95 3082 2435 £1,414 £1,681 £1,528

Lie Down, technical, all finishes

Base part no. Water Volume Dry Weight Distance Pipe Centres Distance wall to Bracket (litres) (kg) wall to front (B) mm pipe centre Centres face (A) mm (C) mm (D) mm15024S 1.3 13.5 75 1434 49 65115024D 1.4 18.1 120 1434 72 65115043S 1.6 22.9 75 1434 49 65115043D 2.1 32.8 120 1434 72 68620043S 2.2 31.0 75 1934 49 46520043D 2.8 43.7 120 1934 72 490

Outline, central heating

*All heat outputs are calculated in accordance with BS EN442. For an explanation of Delta T (Δt ) and to calculate performance at different Delta Ts please see the technical information on page 36. To convert Watts to BTU/hr multiply the figure shown above for watts by 3.412. Valves must be ordered separately. Hidden manual valves are available for an additional £102 + VAT per radiator - see installation details and drawings on page 34 - thermostatic valves are not available as standard with this option. If thermostatic control is required with hidden valves please contact Eskimo technical sales. Towel hanging rails (5mmx 40mm strips) can be added to all mirror radiators: £96 for the first rail, £52 for subsequent rails. Test Pressure: 7.5 bar. Maximum Operating Pressure: 5 bar. Maximum Operating Temperature: 95ºC. Connections: 1/2” BSP Bottom (underside of radiator) opposite end tappings - use angle valves for pipes coming from walls and straight valves for pipes coming up from the floor.

Outline Get Up in Super Mirror:radiator size H 1500mm x W 430mm x D50mm

28 29

Outline You Square in brushed stainless:radiator size H 600mm x W 600mm x D95mm

Colours, finishes and taking care of your Eskimo

Eskimo radiators are available in a huge range of finishes. Since our aim is to manufacture the world’s most beautiful radiators, our quality of finish is everything: so here are more details on the finishes we produce and how we achieve the standards upon which our reputation was built

Brushed stainless steel We use brushed stainless steel for our Outline radiator panels. The brushing is carried out on a grade which is compatible with most brushed stainless used in kitchens. It is also perfect for producing a sleek, industrial feel to an interior scheme.

Super Mirror stainless steel For our mirror finish radiators, Eskimo exclusively uses Super Mirror stainless steel from Rimex Metals. Rimex’s Super Mirror is as near a perfect polish that can be produced on stainless steel and has a perfect reflective quality. Unlike a glass mirror, Super Mirror can be used in food preparation, ceiling and high traffic areas because it will not shatter. There really is no other mirror stainless like it. However, as it is a sheet product, unlike a glass mirror there may be some distortion in the panel, particularly around the edges. It won’t therefore compete with a glass mirror for absolute perfection, but assuming you’re per-fect to start with, we bet you could do with a couple of extra curves?

Polished Aluminium Our Ron radiator sections are all polished in-house. Polishing a product of this scale and shape is a highly skilled job which involves running each Ron section by hand over a series of increasingly finer abrasive polishing wheels, ultimately seeking to take out practically all visible blemishes and marks. Eskimo’s polished finish is second to none.

Matt aluminium The matt aluminium finish applied to our Ron radiator range is an anodised finish. Firstly each Ron section is polished as described above, then chemically etched and finally anodised to give a matt ap-pearance that is durable and sleek. This entire process is carried out in our in-house anodising facility.

Gold This an alternative anodised finish, again conducted entirely in-house. The gold colour is achieved through the use of a dye applied as part of the anodising process. This gives a slightly translucent lustre that will only be achieved with a true metallic product and cannot be matched by any painting process.

Caring for metal finishes All of these metal finishes are pretty hard wearing, but all of them will benefit from an occasional clean with nothing more than soapy water. To remove any streaks or stains from our polished finishes we can supply specialist cleaning cloths – please contact our sales department. Brushed stainless steel radiators also benefit from the application of a little baby oil to prevent finger marking. Apply this with a lint free cloth. If your radiator is inadvertently scratched in service we do have tips on how minor scratches can be removed depending upon the finish. However it’s best to call our technical department for a discussion on the best products and methods to use before attempting a repair.

ColoursAll coloured finishes are applied in-house at our own powder coating facility. Other manufacturer’s radiators are usually wet sprayed with liquid paint - this doesn’t offer anything like the same durability or thickness of coating that powder coating achieves.

Powder coating is a polymer coating that is applied as a dry powder and then cured at high temperature to form a hard finish that is much tougher than conventional paint. Powder coating also has the advantage that it emits zero or near zero volatile organic compounds (VOCs which can be harmful to health) – particularly important when a product is going to beheated in the home.

All radiator parts that we powder coat are pre-treated to improve adhesion and corrosion resistance, meaning many, many years of trouble free service. Our facility is accredited by the world’s leading powder suppliers to ensure the optimum product quality is consistently achieved.

Any powder coating is, however, only as good as the powder used, so Eskimo specify powders from IGP Pulvertechnik AG. In our opinion Swiss manufacturers IGP produce the best powders on the market, most commonly used in demanding exterior applications.

IGP have also developed an innovative easy-clean technology called IGP-DURA®clean. IGP-DURA®clean coatings possess a hydrophobic surface. Particles of dirt cannot easily adhere to the surface of the coating and are beaded away by water. As this is applied as part of the coating, the effect is permanent. This dirt repellence means less frequent and much easier cleaning. It also provides a coating that will withstand repeated cleaning better – all you need is the occasional sponge and soapy water. Eskimo are the only radiator manufacturers to use IGP-DURA®clean powders.

Eskimo have selected a range of standard colours that we hold in stock, and which are included in the standard price list. All other RAL colours are available as well as colours from other classification systems – we also offer a colour matching service. Prices for non standard colours and colour matching are available on application.

Metal finishes

30 31

32 33

Eskimo radiator colour collection

YELLOWS AND CREAMS ORANGES REDS BLUES GREENS GREYS & BROWNS WHITES & BLACKS METAL FINISHES

RAL 9001 CREAM RAL 2011 DEEP ORANGE RAL 3002 CARMINE RED RAL 7006 BEIGE GREY MATT ALUMINIUMRAL 9002 GREY WHITERAL 5013 COBALT BLUE RAL 7002 OLIVE GREY

RAL 3004 PURPLE RED RAL 7012 BASALT GREY POLISHED ALUMINIUMRAL 9003 SIGNAL WHITERAL 5024 PASTEL BLUE

RAL 3007 BLACK RED RAL 7015 SLATE GREY ESKIMO GOLD RAL 9005 JET BLACK

RAL 3015 LIGHT PINK RAL 7016 ANTHRACITE GREY BRUSHED STAINLESS

RAL 3016 CORAL RED RAL 7026 GRANITE GREY

RAL 9010 PURE WHITE

SUPERMIRROR

RAL 3027 RASPBERRY RED RAL 7030 STONE GREY

RAL 4004 CLARET VIOLET RAL 7040 WINDOW GREY

RAL 8017 CHOCOLATE BROWN

RAL 1015 LIGHT IVORY

Please note: due to the limitations of the printing process, the colours shown here are not exact representations. To see precise colour representation, please ask your showroom to show you a RAL colour chart. Alternatively, we are very happy to provide a colour swatch at additional cost.

Contact details: www.eskimodesign.co.uk - 0207 117 0110

Both Outline and Ron radiators can be specified with alternative connection positions at additional cost – please contact the Eskimo sales department for details. See www.eskimodesign.co.uk for contact details.

Outline radiators: hidden valve installation details

With Outline radiators it is possible to have completely hidden manual valves. This is an optional extra that must be specified at the time of ordering. It is not possible to fit thermostatic valves with this option, so if thermostatic control is required this must be installed separately, either via a dedicated room thermostat or via remotely sited thermostatic valves. Discuss the options with your installer and/or call the Eskimo technical department for advice. See www.eskimodesign.co.uk for contact details. With this option the radiator front panel will be extended by 100mm in height in order to hide the valves and flexible hoses included with the radiator, and this should be accounted for when working out radiator size selection. Installation details are shown on fig. 1 to assist with planning – this is not intended to provide a precise specification of pipe positions but as guidance only to help you decide if hidden valves are possible in your installation.

Installation steps after fixing brackets to the wall and installing pipework and leaving stub pipes projecting from wall with a 90º angle pointing horizontally outwards towards the sides of the radiator as shown on the drawing:

1. With the radiator off the wall fit ½” BSP to ½” BSPT brass adaptors to radiator taper (BSPT) ends into the radiator using PTFE tape and/or a suitable thread sealant. Tighten.

2. Fit flexible hoses (end with rubber seal) to ½” BSP male brass adaptor end now projecting from radiator after step 1. Tighten.

3. Move radiator close enough to wall to allow flexible hose end to reach stub pipe.

4. Fit compression end to 15mm stub pipes projecting from wall ideally with valve facing downwards so that valve can be operated from underneath radiator.

5. Provided the radiator is to be installed far enough off the floor so that the valve can be accessed with a flat head screwdriver from underneath, the radiator can now be mounted on the wall, filled, vented and balanced in accordance with installation instructions.

6. If the radiator is to be mounted too close to the floor to allow access to the valves with a screw-driver the radiator will need to be filled, vented and balanced via the valves prior to being lifted onto the brackets (Option 5 is very much preferable).

At no stage during the installation process should the flexible hoses be put under strain, crushed or bent through an angle tight enough to cause the hose to collapse, as this could cause damage to the hoses or associated pipework.

Q. How do I choose the size of my radiator?A. Firstly, ask your plumber to calculate the heat requirement of the room(s) in question or follow the steps in our heat requirement calculator on our website (we can also email you this as a spread-sheet). Then decide whereabouts you want the radiator and what shape it ought to be. Then look through the price lists to see what options you have in terms of size and finish – we also have a further 300 standard sizes, 6 standard finishes and an infinite variety of special sizes and finishes. You’ll find masses of options, so please call Eskimo if you’d like assistance.Q. Are Eskimo radiators compatible with my existing heating system?A. Yes, Eskimo radiators are designed for use with any central heating system, in any combination of shapes or sizes, and with anybody else’s radiators installed in other parts of the system. The connections are British Standard Pipe connections, which despite the name, are used on all radiators throughout Europe. Eskimo radiators have been used in locations as diverse as New York, Casablanca, Little Snoring and Irkutsk in Siberia. As for our electric radiators – again they are compatible with all systems throughout Europe and we can also supply 120v 60hz versions for use in North America.Q. Should I change all of my radiators at once or can I do them one at a time?A. Whichever suits your site best – Eskimo radiators will work happily as a single feature radiator or as the

only style of radiator throughout a site. If one radiator only is changed, then the system might require balancing to ensure an equal flow of water to each radiator, but your plumber will do this. If you are installing yourself then see the technical help page on balancing found on our website.Q. Should I keep the radiators in the current position or can I move them somewhere else in the room?A. You can move them anywhere you like, but consider these points:if you keep the radiator in the current position it will reduce installation costs. Eskimo are the only company who offer radiators tailor made to the nearest millimetre – if you give us your current pipe measurements (centre to centre) we will make a radiator that matches those precisely, reducing installation costs hugely.If you have a traditional property with single glazing then fitting the radiators under the windows makes sense, as the cold air dropping from the window is heated by the radiator, cancelling out cold draughts.If you have a modern building or good double glazing, then you can site the radiator in any position and in whatever format (long and low, tall and narrow etc) you fancy.Q. Is there anywhere I shouldn’t put a radiator?A. Absolutely, but in terms of installation in a room, think about the movement of air through the radiator. All Eskimo radiators require air to move freely into (from underneath) and out of (above) the radiator. In practice this means that you should allow 100mm above

and 100mm below the radiator without any obstructions such as skirting, shelves etc if you want to achieve full performance. If mounting the radiator in a purpose built alcove allow 100mm above and below the radiator, while the sides can be within about 25mm of the alcove wall provided the effects of heat are considered in the construction.Q. How long will my radiator take to make?A. All Eskimo radiators are made to order at our factory in Birmingham, UK, and the maximum lead time is 6 weeks, order to delivery.Q. Is there anything I can do to speed the process up?A. Yes, you can have all the pipework and valves installed, flooring laid, decoration finished etc. Then, when the radiator is ready, it’s just a case of mounting it on the wall and connecting the valves to the radiator. Pipe connection positions are available on the relevant installation instructions on our website, or from Eskimo direct. We’ve done this for hundreds of installations and it’s easy.Q. Are Eskimo radiators efficient?A. Yes, Eskimo radiators have uniquely high heat outputs for a given size of radiator – they therefore use less material to deliver the same power. However, they will cost the same amount to run as any other radiator, as all a radiator does is replaces the heat lost through the fabric of the building – it can’t make that building lose any less heat. So the running cost is a feature of how well insulated the building is (how much heat it loses) not how much heat the radiator gives out.

Non standard connection positions

34 fig. 1

Technical data Frequently Asked Questions

35

36

Delta T (Δt ) is the difference between the desired ambient air temperature in the room (if in doubt use 20ºC) and the mean water temperature in the radiator. To calculate the mean water temperature in the radiator, add the water temperature at the inlet to the radiator to the water temperature at the outlet from the radiator and divide by 2. As an example:

You wish to have an ambient air temperature of 21ºC in your bathroom. The water coming in to the radiator is at 50ºC, by the time it’s passed through the radiator it is down to 42ºC. The mean water temperature is therefore (50+42)/2 = 46ºC. To calculate the Delta T, subtract 21 from 46; the Delta T is therefore 25ºC. Delta Ts of 60ºC and 50ºC are shown in the price lists. If your Delta T is not 60ºC or 50ºC then you will need to apply a correction factor to the heat outputs shown in the price lists - see the list of correction factors alongside.

ALL SALES AND TECHNICAL INFORMATION ARE SUBJECT TO ESKIMO STANDARD TERMS AND CONDITIONS, COPIES OF WHICH ARE AVAILABLE ON THE WEBSITE www.eskimodesign.co.uk

Δt ºC Correction Factor 20 0.24 21 0.26 22 0.27 23 0.29 24 0.30 25 0.32 26 0.3427 0,35 28 0.37 29 0.39 30 0.41 31 0.42 32 0.4433 0.46 34 0.4835 0.5036 0.5137 0.5338 0.5539 0.5740 0.5941 0.6142 0.6343 0.6544 0.6745 0.6946 0.7147 0.7348 0.7549 0.7750 0.7951 0.8152 0.8353 0.85

Δt ºC Correction Factor 54 0.8754.5 0.8855 0.8955.5 0.9056 0.9156.5 0.9257 0.94 57.5 0.95 58 0.9658.5 0.9759 0.9859.5 0.9960 1.0060.5 1.0161 1.0262 1.0463 1.0764 1.0965 1.1166 1.1367 1.1568 1.1869 1.2070 1.2271 1.2472 1.2773 1.2974 1.3175 1.3476 1.3677 1.3878 1.4179 1.4380 1.45

Delta T

T +44 (0)207 117 0110 F +44 (0)207 117 1565E hallo@eskimodesign.co.uk

Eskimo Design Ltd, Premier House, Valepits Road, Garretts Green, Birmingham, B33 0TD, UKwww.eskimodesign.co.uk