ES2212S ESN1310G ESN2212S - General PumpISO 9001:2008 CERTIFIED The Big Evolution GP Companies, Inc....
Transcript of ES2212S ESN1310G ESN2212S - General PumpISO 9001:2008 CERTIFIED The Big Evolution GP Companies, Inc....
![Page 1: ES2212S ESN1310G ESN2212S - General PumpISO 9001:2008 CERTIFIED The Big Evolution GP Companies, Inc. 1174 Northland Drive Mendota Heights, MN 55120 USA Phone: 651.454.6500 • Fax:](https://reader036.fdocuments.net/reader036/viewer/2022081607/5ed1caff12457709ed592b9c/html5/thumbnails/1.jpg)
ISO 9001:2008 CERTIFIED
The
Big
EvolutionGP Companies, Inc.1174 Northland DriveMendota Heights, MN 55120 USAPhone: 651.454.6500 • Fax: 651.454.8015Toll Free: 888.474.5487www.generalpump.comemail: [email protected]
General Pump is part ofthe Interpump Group
Distributed By8
Our Mission
To be the best fluidcontroldevice companyworldwide,providing our customerswith superior andinnovativeproducts, coupledwith a level of service that exceedscustomer expectations.
At General Pump,“We’ll Find A Way!”
Evolution ES Series From General Pump
ES SERIES - SOLID SHAFTMODEL FLOW PRESSURE RPM EBHPES2212S 4.76 GPM 3,000 PSI 1450 RPM 9.8ES2213S 5.55 GPM 3,000 PSI 1450 RPM 11.45ES1810S 3.43 GPM 4,000 PSI 1750 RPM 9.4ES2010S 3.96 GPM 4,000 PSI 1750 RPM 10.9ES2012S 4.76 GPM 4,000 PSI 1750 RPM 13.0ES2013S 5.55 GPM 3,600 PSI 1750 RPM 13.6
ES SERIES - SOLID FLANGE - NICKEL PLATEDMODEL FLOW PRESSURE RPM EHP
ESN2212S 4.76 GPM 3,045 PSI 1450 RPM 9.8ESN2213S 5.55 GPM 3,045 PSI 1450 RPM 11.5ESN1810S 3.43 GPM 4,000 PSI 1750 RPM 9.4ESN2010S 3.96 GPM 4,000 PSI 1750 RPM 10.9ESN2012S 4.76 GPM 4,000 PSI 1750 RPM 13.0ESN2013S 5.55 GPM 3,625 PSI 1750 RPM 13.6
ES SERIES NICKEL PLATED- FLANGED FOR GAS (SAE J609-B)MODEL FLOW PRESSURE RPM GHP
ESN1310G 3.43 GPM 4,000 PSI 3400 RPM 9.3 ESN1313G 4.0 GPM 4,000 PSI 3400 RPM 10.7ESN1510G 4.5 GPM 3,625 PSI 3400 RPM 11.0ESN1512G 5.3 GPM 3,625 PSI 3400 RPM 13.0
ES2212S
ESN2212S
ESN1310G
© GP Companies, Inc.2016 Rev. B
EVOLUTION ES/N SERIESEVOLUTION ES/N SERIES
![Page 2: ES2212S ESN1310G ESN2212S - General PumpISO 9001:2008 CERTIFIED The Big Evolution GP Companies, Inc. 1174 Northland Drive Mendota Heights, MN 55120 USA Phone: 651.454.6500 • Fax:](https://reader036.fdocuments.net/reader036/viewer/2022081607/5ed1caff12457709ed592b9c/html5/thumbnails/2.jpg)
Oil dipstick with breather
NEW DESIGN! Connecting rods reduce
specific pressureand better lubrication
Large oil capacitymeans better cooling
and lubrication
Oversized premium tapered roller bearing
NEW DUAL DIAMETER PLUNGER GUIDE!Rolled oil seal sliding surface
reduces risk of oil leaks and extends oil seal life
Oversized forged crankshaft
Oversized connecting rod pin
NEW! Dust protection chamber betweencrankcase and manifold
NEW! Solid ceramic plungerswith dual guide system (patent pending)
NEW FORGED BRASS MANIFOLD!Working pressure increased to 4,000 PSI
NEW PLUNGER FASTENING SYSTEM!Eliminates the risk of pressure build-up inside the plunger.
NEW! Patent pending seal packings withSpecial plunger guide bushing (Patent Pending)
Inlet valves interchangeable with 63 and 44 Series
NEW OPTIMIZED OUTLET VALVES!Better volumetric efficiency
NEW GUIDING SYSTEM! Optimal sliding of the plunger guide assemblyreduces friction between plunger and sealsextends life of seals (Patent Pending)
NEW DUAL LIP OIL SEAL!Better oil/water sealing
NEW CRANKCASE DESIGN!The oversized mechanical sectionreduces oil temperature
Increased sliding surface of the plunger guide meansbetter stability of the guideand reduced wear
Large diameter of sight glass meanseasier oil checking
1/8” Pressure Gauge Port
These Pumps are100% Made in Italy These Pumps are100% Made in Italy
EVOLUT ION ES /N SER I ESEVOLUT ION ES /N SER I ES