ERIKS Hose Technology RX Bellows - · PDF fileRX Bellows. Expansion joint with rotating...
Transcript of ERIKS Hose Technology RX Bellows - · PDF fileRX Bellows. Expansion joint with rotating...
RX Bellow■ Multiply bellows
■ Different pressure classes
■ High life cycle
■ Excellent flexibility
■ Metal expansions joints: ■ AISI 321 ■ AISI 316 ■ Other alloys
■ Rubber expansions joints: ■ EPDM ■ CSM ■ NBR ■ FPM
■ UV resistant rubber bellows
■ Optional tie bars and inner sleeves
ERIKS Hose Technology is Europe’s leading manufacturer of bellows.
All installations may be subjected to movements. These movements can vary from very slow (thermal expansion or shrinking movements) to very fast (vibrations).
Thermal expansion can result in adverse material stresses in piping. Fitting bellows can prevent these undesired material stresses.
Vibrations can also cause stresses, as well as unpleasant noise in the work and living environment. Fitting bellows can counteract this.
The solution for all these problems is the RX® bellows.
The faultless functioning of bellows requires fitting to take place particularly carefully according to the instructions, and the pressure and temperature limits concerned may not be exceeded.
Our knowledge and supply capabilities in this field offer you the opportunity to choose the bellow to optimally meet your requirements.
RX Bellows
www.eriks-hose-technology.com
Expansion joint with rotating flangesExpansion joint with rotating flanges suitable for compensation of pipe expansion.
The rotating flanges will guarantee an easy installation.
Bellow material in stainless steel, rotating flanges PN16. For axial movement compensation applied on steam, thermal oil, hot water.
Bellow AISI 321 (AISI 316 on request)
Connections Flanges according DIN PN10/16 (ANSI, JIS, ... on request)
Flanges Steel and stainless steel (AISI 304, 316 on request)
Pressure class PN16
Expansion joint with fixed flangesExpansion joint with fixed flanges suitable for the compensation of pipe expansions.
Bellow material in stainless steel, fixed flanges and PN16 execution.
For compensation of axial movements in applications with steam, thermal oil, hot water .
Bellow AISI 321 (AISI 316 on request)
Connections Flanges according DIN PN10/16 ANSI, JIS,... on request)
Flanges Steel and stainless steel (AISI 304, 316 on request)
Pressure class PN16
Lateral Expansion JointLateral expansion joint with fixed flanges for compensating lateral movements. Bellow in stainless steel, fixed flanges, PN16 execution. Tie rods, nuts and spherical washers in steel 8.8. For lateral movements with applications in steam, thermal oil, hot water.
Bellow AISI 321 (AISI 316 on request)
Connections Oval flanges DIN PN10/16 (ANSI, on request)
Flanges Steel and stainless steel (AISI 304 on request)
Pressure class PN16
Expansion joint with rotating flangesExpansion joint consisting of a rubber bellow and flange connection. Rubber expansion joints are ideal for the compensation of movement and vibration.
The rotating flanges will guarantee an easy installation.
Bellow material in EPDM rubber with rotating flanges in PN16 for axial movement / vibration applied on hot water / chilled water.
Bellow EPDM, NBR or CSM (Other materials on request) UV resistant
Connections Flanges according DIN PN10/16 (ANSI 150, BS10 on request)
Flanges Zinc plated steel and stainless steel (AISI 304, 316 on request)
Pressure class PN16 (up to DN300)
www.eriks-hose-technology.com
Contact your nearest Service Centre on 0845 006 6000
ERIKS Hose Technology - Slough
692 - 693 Stirling RoadSlough Trading EstateSloughBerks. SL1 4ST
T 01753 570863F 01753 824141E [email protected]
ERIKS Hose Technology - Bolton
Unit 1 QueensbrookBolton Technology ExchangeSpa RoadBolton. BL1 4AY
T 01204 541500F 01204 524582E [email protected]
ERIKS Hose Technology Northampton
No 12, Osyth CloseBrackmills Ind EstNorthamptonNN4 7YD
T 01604 877668F 01604 769915E [email protected]