Ergonomics – A report from SR Technics Switzerland Previous … · 2014. 11. 1. · Launching /...
Transcript of Ergonomics – A report from SR Technics Switzerland Previous … · 2014. 11. 1. · Launching /...
© SR Technics 2010
Ergonomics – A report from SR Technics Switzerland
Caroline Preising, Work Safety Specialist, OQSEAGOSH, May 05 – 06, 2010
2© SR Technics 2010
Table of Contents
● Previous Work● Projects / Ideas● History● 2010
○ Ergonomic standard
○ Booklet on ergonomic aids
● Details on two projects● 2010 ongoing
3© SR Technics 2010
Previous Works
- 2007
● Information provided during Safety-Basics-Training● Work place assessments carried out from time to time
and as required● Hand out information through flyer and/or checklists on
ergonomic work places
● NO SYSTEM but Swiss Law!
4© SR Technics 2010
Projects / Ideas
● Training● Ergonomic work places (administrative / productive)● Specific work place assessment in Engine Module Inspection● Acquisition of special office desks (high desk)● Acquisition of ergonomic work appliances
● Clear focus on ergonomics training! “Initial Phase” only for people working in front of a c omputer!
5© SR Technics 2010
History
2008
● Information provided during Safety-Basics-Training
● Start of courses„Working at the computer“4 courses / year2 hrs duration12 participants(well attended – good feedback,
need for such training)● Workplace assessments from time to
time and as required● Support / collaboration on ideas
regarding ergonomics.● Hand out information via flyer and/or
checklists on ergonomic work places
2009
● Information provided during Safety-Basics-Training
● Further courses„Working at the computer“4 courses / year2 hrs duration12 participants(well attended – good feedback,need for such training)
● Specific workplace assessment in Engine Module Inspection
● Support / collaboration on ideasregarding ergonomics.
● Hand out information via flyer and/or checklists on ergonomic work places
6© SR Technics 2010
2010 (now)
2010
● Information provided during Safety-Basics-Training● Further courses „Working at the computer“● Work place assessments as required● Support / collaboration on ideas regarding ergonomics● Weekly performed ergonomics walks
● Initialising Ergonomics Standard for SRT● Initialising list of Ergonomic Aids (for work places)
7© SR Technics 2010
Ergonomic Standard for SR Technics
● Work postures – working movements○ Working height
○ Working distance
○ Seating○ Working at the computer
○ Facilities / premises
○ Lighting, temperature / humidity, noise, vibrations○ Work spaces
○ Manual handling (loads)
● Work load○ Material handling / packages
○ Lifting aids
○ Hand-held machines and tools(Rollout May / June 2010)
8© SR Technics 2010
Ergonomic Standard for SR Technics
● Static load● Work pace / tasks / work organisation (“soft factors”)
○ Introduction
○ Job rotation, work enlargement○ Accelerated work
○ Technical work organisation
○ Work organisation
(Rollout May / June 2010)
9© SR Technics 2010
Booklet on Ergonomic Aids
● High desks (small, large)● Special chairs● Ergonomic keyboard / mouse● Special gel pads (keyboard / mouse)● Holder for documents● Footrest● Special chair cushion (air)
(Rollout May / June 2010)
10© SR Technics 2010
Details on Two Projects
1. Training “Working at the computer”4 courses / year2 hrs duration12 participants(well attended – good feedback – need for such training)
11© SR Technics 2010
Details on Two Projects
1. Training “Working at the computer”Extract on training slides:
10 Tips for working at the computer:● Stop reflections and glare!
● Look straight ahead!
● Make space!● Make your workplace work for you!
● Is your seat at the right height?
● Make sure your desk is at the right height!● Keep your distance!
● Lower your monitor!
● Need any workplace aids?● Get moving!
12© SR Technics 2010
Details on Two Projects
1. Training “Working at the computer”Extract on training slides:
5 questions about working healthy● Do you know how to adjust the furniture at your
workplace especially your chair?● Do you know whether the height of your desk is
adjustable?● Have you positioned the top of your monitor some 5-
10 cm below eye level?● Have you positioned your keyboard and mouse
parallel to the edge of your desk?● Make your workplace work for you!
Sometimes small changes makea big difference!
13© SR Technics 2010
Details on Two Projects
2. Specific work place assessment in Engine Module Ins pectionAssess work place for different people and different work
Situation before testing phase:
14© SR Technics 2010
Details on Two Projects
2. Specific work place assessment in Engine Module Ins pectionAssess work place for different people and different work
Situation before testing phase:
15© SR Technics 2010
Details on Two Projects
2. Specific work place assessment in Engine Module Ins pectionAssess work place for different people and different work
Situation during testing phase:
16© SR Technics 2010
Details on Two Projects
2. Specific work place assessment in Engine Module Ins pectionAssess work place for different people and different work
Situation during testing phase:
17© SR Technics 2010
Details on Two Projects
2. Specific work place assessment in Engine Module Ins pectionAssess work place for different people and different work
Situation NOW:
Work place “empty”Special desks returned (borrowed)Idea leader left division
����
18© SR Technics 2010
2010 (ongoing – next steps)
2010
● Information during Safety-Basics-Training● Further courses „Working at the computer“● Work place assessments on demand● Support / collaboration on ideas regarding ergonomics● Weekly performed ergonomics walks
● Launching / Implementation of an ERGONOMIC STANDARD for SR Technics● Launching / Implementation of need on ERGONOMIC AIDS (work places)
● Working close with our Facility department (internal / external)