ER-6000AT-SW IN-LINE) PCB SEPARATOR CUT...
Transcript of ER-6000AT-SW IN-LINE) PCB SEPARATOR CUT...
ER-6000AT-SW (IN-LINE)
PCB SEPARATOR CUT MACHINE
Technical Specification
01. PCB Working Area : (W) 330mm× (L) 420mm
02. X、Y、A、Cutting Speed:1 ~100mm/s
03. X、Y、A、Repeatability Accuracy:± 0.02mm
04. X、Y、A、Z、B、Control Method:Using Industrial IPC
05. X、Y、A、Z、B、Drive Mode:AC Servo Motor
06. Machine Operation and Data Saving:Using PC
07. Cutting Accuracy:± 0.1mm
08. Spindle Speed:MAX60000rpm
09. Machine Power Supply:220V 1ψ 50 / 60HZ
10. Air Supply:4.5kg/cm2 Above
11. Power Consumption:3KVA
12. Dust Collector Type:3HP Lower Dust Collector
13. Dust Collector Power Supply:220V (380V/415V) 3ψ
14. Machine Dimension:1550×1490×1670mm (W×D×H)
15. Dust Collector Dimension : 665 x 635 x 1700mm
Advantages
(i) Dust Collector unit uses high efficiency dust cleaner to improve dust collection efficiency.
(ii) Dust Collector sensor built-in for alarm notification when dust bag are full.
(iii) X, Y A-axis gantry structure are designed to improve cutting speed and accuracy.
(iv) Safety features are added to meet machine safety requirement.
Machine Option :
Hand Held Barcode with
ShopFloor Programming software
Auto Bit Changer Dedicated Jig / Fixture
5 HP Upgrade