Equipment Used for Laying Acp and pccp
-
Upload
charichang -
Category
Documents
-
view
226 -
download
0
Transcript of Equipment Used for Laying Acp and pccp
8/9/2019 Equipment Used for Laying Acp and pccp
http://slidepdf.com/reader/full/equipment-used-for-laying-acp-and-pccp 1/9
EQUIPMENT USED FOR LAYING ACP
Clip Spreader Motor Grader
Oil Distributor Paver (paver fnisher, asphaltfnisher, paving machine)
Paving Plant / asphalt plant oad eclaimers
8/9/2019 Equipment Used for Laying Acp and pccp
http://slidepdf.com/reader/full/equipment-used-for-laying-acp-and-pccp 2/9
EQUIPMENT USED FOR LAYING PCCP
Concrete plant, also !no"n as a #atch plant and a Mi$er Curb Machine
ead%&mi$ truc! (cement mi$er) Slip 'orm paver
manual straigth edge vibrating screed Po"erloat
8/9/2019 Equipment Used for Laying Acp and pccp
http://slidepdf.com/reader/full/equipment-used-for-laying-acp-and-pccp 3/9
EQUIPMENT USED FOR BOTH ACP AND PCCP
ibrator% Steel Drum compactor Pneumatic tired roller
Padded Drum Compactor Pull *%pe&Sheeps'oot
Combination Compactors
8/9/2019 Equipment Used for Laying Acp and pccp
http://slidepdf.com/reader/full/equipment-used-for-laying-acp-and-pccp 4/9
#ulldo+er heel loader
Dump *ruc! ater tan! truc!
Concrete screed Concrete vibrator
8/9/2019 Equipment Used for Laying Acp and pccp
http://slidepdf.com/reader/full/equipment-used-for-laying-acp-and-pccp 5/9
Concrete cutter (hand&held cut&o- sa", a big "al!&behind sa")
#ar cutter
8/9/2019 Equipment Used for Laying Acp and pccp
http://slidepdf.com/reader/full/equipment-used-for-laying-acp-and-pccp 6/9
Chip spreader
- A chip spreader lays down the aggregate on top of a bituminous binder which is then rolled by a
compactor.
Road Grader
- A grader is a machine with a long blade used to create a flat surface. Graders are commonlyused in the construction and maintenance of dirt roads and gravel roads. In the construction of
paved roads they are used to prepare the base course to create a wide flat surface for the asphalt
to be placed on.
- Capacities range from a blade width of 2.50 to .!0 m and engines from "!#!! $%&'25#
500 hp(.
Asphalt distributor
- Asphalt distributors are used to apply prime or tac$ coats on a surface in preparation for paving.
)hey are available in either truc$ mounted or trailer models and are considered the most
important piece of e*uipment on any asphalt surface treatment pro+ect. It consists of an insulated
tan$ with a heating system, a spray bar and uni*ue control system.
- Application of a prime or tac$ coat by the distributor is an eact science that re*uires
sophisticated e*uipment to ensure it produces a uniform spray
Asphalt paver
- A paver &paver finisher, asphalt finisher, paving machine( is a machine used to lay asphalt on
roadways. It is normally fed by a dump truc$ which brings hot asphalt.
Paving Plant / asphalt plant
- An asphalt plant is used for the manufacture of asphalt, macadam and other forms of coated road
stone, sometimes $nown as blac$top.
Road Reclaimers
- oad reclaimers pulveri/e the asphalt layer and mi it with the underlying base to stabili/e
deteriorated roadways. )he reclaimers can add asphalt emulsions or other binding agents during
pulveri/ation or during a separate mi pass.
Concrete batch plant
- A concrete plant, also $nown as a batch plant, is a plant that combines various ingredients to form
concrete. ome of these inputs include sand, water, aggregate &roc$s, gravel, etc.(, fly ash,potash, and cement. )here are two types of concrete plants1 ready mi plants and central mi
plants. A concrete plant can have a variety of parts and accessories, including but not limited to1
miers &either tilt-up or hori/ontal or in some cases both(, cement batchers, aggregate batchers,
conveyors, radial stac$ers, aggregate bins, cement bins, heaters, chillers, cement silos, batch
plant controls, and dust collectors &to minimi/e environmental pollution(.
8/9/2019 Equipment Used for Laying Acp and pccp
http://slidepdf.com/reader/full/equipment-used-for-laying-acp-and-pccp 7/9
- )he center of concrete batching plant is the mier. )here are three types of mier, tilt, pan, and
twin shaft mier. )he twin shaft mier can ensure even miture of concrete and large output, while
the tilt mier offers a consistent mi with much less maintenance labor and cost.
Curb Machine
- A curb machine ta$es concrete and creates a continuous curb and gutter.
Transit mixer
- A cement mier is a machine that homogeneously combines cement, aggregate &such as sand or
gravel(, and water to form concrete. A typical concrete mier uses a revolving drum to mi the
components.
Slip form paver
Manual straight edge
Vibrationg screed
Poer !loat
Vibrator" compactor
- ibratory roller compactor is used to compact soil, gravel, concrete, or asphalt in the construction
of roads and foundations. It is widely used to compress the surface being rolled to ensure a
smooth, even surface. ibratory rollers are widely used for compacting asphalt pavements
because they achieve the re*uired densities faster.
Pneumatic tired roller
- 3neumatic tire compactors are used on small to medium si/e compaction +obs, primarily on
bladed, granular base materials. 3neumatics are not suited for high production, thic$ liftemban$ment compaction pro+ects.
- 4ne advantage that pneumatic compactors have is that there is little bridging effect between the
tires. )herefore, they see$ out soft spots which may eist in the fill. or this reason, they are
sometimes referred to as 6proof7 rollers.
- Another advantage is that pneumatic rollers can be used on both soil and asphalt so a road
building contractor can save by having one compactor for both stages of construction # base and
asphalt.
3added 8rum Compactor
- 3added drum compactors are usually applied to compact soil, gravel, concrete, or asphalt in the
construction of roads and foundations. )he pads are involuted to wal$ out of the lift without fluffing
the soil and tapered to help clean themselves.
8/9/2019 Equipment Used for Laying Acp and pccp
http://slidepdf.com/reader/full/equipment-used-for-laying-acp-and-pccp 8/9
3ull )ype-heepsfoot
- 3ulled behind a machine, a sheepsfoot roller has almost hoof li$e structures protruding from a
roller to offer pinpoint pressure as in a herd of sheep was wal$ing across the field.
Combination Compactors
- Combination compactors are used for the compaction of asphalt base and sub-base courses for
medium and large road construction and road maintenance. ome compact rollers also use a
vibratory system on the front drum for density re*uirements and four pneumatic tires in the rear to
provide impermeability and smoothness of the material. Compacted material manipulated by the
four pneumatic tires helps in improving surface teture and reduce water intrusion.
#ulldo$er
% A bulldozer is a crawler &continuous trac$ed tractor ( e*uipped with a substantial metal plate
&$nown as a blade( used to push large *uantities of soil, sand, rubble, or other such material
during construction or conversion wor$ and typically e*uipped at the rear with a claw-li$e
device &$nown as a ripper ( to loosen densely compacted materials.
&heel loader
- A loader &bucket loader , front loader , front-end loader , payloader , scoop,shovel, skip
loader , or wheel loader ( is a heavy e*uipment machine used inconstruction and sidewal$
maintenance to move aside or load materials such asasphalt, demolition
debris, dirt, snow, feed, gravel, logs, raw minerals, recycled material, roc$, sand, woodchips,
etc. into or onto another type of machinery &such as a dump truc$, conveyor belt, feed-
hopper, or railroad car (.
'umptruc(
- A dump truck &or, 9:, dumper; tipper truc$( is a truc$ used for transporting loose material
&such as sand, gravel, or dirt( for construction. A typical dump truc$ is e*uipped with an
open-bo bed, which is hinged at the rear and e*uipped with hydraulic pistons to lift the front,
allowing the material in the bed to be deposited &<dumped<( on the ground behind the truc$ at
the site of delivery.
&ater tan( truc(
- %ater truc$s are also in the construction industry which uses them for compaction and dustcontrol.
Concrete screeder
- Screed is a flat board, or a purpose-made aluminium tool, used to smooth concrete after it
has been placed on a surface. Also used to assist in leveling the application of plaster.
8/9/2019 Equipment Used for Laying Acp and pccp
http://slidepdf.com/reader/full/equipment-used-for-laying-acp-and-pccp 9/9
Concrete vibrator
- Concrete vibrators consolidate freshly poured concrete so that trapped air and ecess water
are released and the concrete settles firmly in place in the formwor$. Improper consolidation
of concrete can cause product defects, compromise the concrete strength, and producesurface blemishes such as bug holes and honeycombing. An internal concrete vibrator is a
steel cylinder about the si/e of the handle of a baseball bat, with a hose or electrical cord
attached to one end. )he vibrator head is immersed in the wet concrete.
Concrete cutter
- A concrete saw &often $nown as a consaw or road saw( is a power tool used for
cutting concrete,masonry, bric$, asphalt, tile, and other solid materials. It can be a small
hand-held cut-off saw, a big wal$-behind saw or other styles, and it may be powered by
gasoline, hydraulic or pneumatic pressure, or electric motors. )he saw blades used on
concrete saws are often diamond saw bladesto cut concrete, asphalt, stone, etc. Abrasivecut-off wheels can also be used on cut-off saws to cut stone and steel. )he
significant friction generated in cutting hard substances li$e concrete usually re*uires the
blades to be cooled to prolong their life and reduce dust.
#ar cutter
- A bar cutter is a device typically used for cutting bars of metal. )here are many different
types of bar cutters, each one with its own variance in material and si/e capacities, along
with cut cleanness. )he most common type of bar cutter is an abrasive saw, but other
cutters, such as manual cutters and lasers, are commonly employed for certain applications.
=ach type of bar cutter has its own advantages and disadvantages and can only cut certaintypes of metal.
RENTAL RATE