EpiSensor Product Catalogepisensor.com/wp-content/uploads/2012/11/EpiSensor... · ·...

ESD-001-01

© EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509

Email: [email protected] | Web: www.episensor.com

Product Catalog

EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509


ESD-001-01

01

03

06

08

10

13

15

17

19

21

Table of Contents

NGR-30 Gateway

ZEM-61 Wireless 3-Phase Electricity Monitor

ZEM-30 Wireless Single Phase Electricity Monitor

TES-11 / HTS-10 Wireless Temperature / Humidity Sensor

TES-21 / TES-22 Wireless Probe Temperature Sensor

ZIO-20 Wireless 4 - 20mA Current Loop Sensor

ZVO-20 Wireless 0 - 10V Voltage Signal Monitor

ZPC-10 / ZPC-20 Wireless Pulse Counter

ZHM-10 Wireless Heat Metering Kit

RTO-21 Wireless Range Extender



Page

01

ESD-001-00

Data Sheet : NGR-30 Gateway

• Built-in web browser• Easy to use interface• Remote software upgrade capability• Many Data Export Options (CSV, JSON, XML)• Reliable Embedded Operating System• Ethernet• 3G Cellular Modem (optional)• ® Wireless Communications• Industrial temperature range• Dimensions: 67mm x 100mm x 27mm• Fanless industrial enclosure• Wall mounting bracket

FEATURES

EpiSensor’s NGR-30 Gateway manages networks of EpiSensor wireless nodes and provides users with an intuitive web interface to quickly and easily deploy the wireless monitoring system. From this interface, various types of data export can be configured to push energy data to 3rd party energy management software for analysis.

The NGR-30 is an embedded industrial computer with redundancy and reliability at its core. The Gateway allows users to configure and commission all EpiSensor wireless monitoring products.

INTRODUCTION

Nodes List Add Nodes Home

Shown above: NGR-30 Gateway web interface accessed from a laptop.



Page

02

ESD-001-01

[ NGR-30 Gateway - Specification]

WAN Connectivity Gigabit Ethernet via RJ-45

2G / 3G Cellular, UMTS / GPRS / EDGE / HSPA

2.4GHz Zigbee RadioZigbee

Cellular

Ethernet

System Intel Atom 600MHz

1GB

4GB (approx. 50% available for data storage)Storage

RAM

Processor

Embedded LinuxOperating System

Certification CE, FCC, IEC (see user guide for more information)

S3IKM2M800FCC ID

Certification

Physical 67 x 100 x 27 mm (not including antennas)

0.36kg

Wall Mounting FlangesMounting

Weight

Dimensions (LxWxH)

SteelEnclosure0°C to +50°C

Up to 80% (non-condensing)Operating Humidity

Operating Temperature

Zigbee ® Specification Zigbee™ Pro

2.4 Ghz ISM Band

16 Channels (11 - 26)Channels

Radio Frequency

Radio Technology

+3dBm (+5dBm in Boost Mode)

-98dBm @ 1% Packet Error Rate

up to 250 kbits/secData Rate

Rx Sensitivity

Max Tx Power

128-bit AES EncryptionEncryption (Sensor Network)

Up to 50m

Up to 300m (direct line of sight)Outdoor Range (Sensor Network)

Indoor Range (Sensor Network)

Data Export push via (S)FTP / local storage

push via HTTP(S) / local storage

push via HTTP(S) / local storageXML

JSON

CSV

SQL inserts to GFT via HTTPSGoogle Fusion Tables

Ordering Codes Ethernet

Ethernet + 3G Cellular ModemNGR-30-2

NGR-30-1



Page

03

ESD-001-00

Data Sheet : ZEM-61 : Wireless 3-Phase Electricity Monitor

The ZEM-61 Wireless 3-Phase Electricity Monitor is suitable for monitoring energy usage in a wide range of commercial and industrial environments.

It can be used to monitor manufacturing lines, HVAC equipment, distribution panels, 3-phase machines, main incomers or any other 3-phase loads in retail environments, hotels, leisure centres, data centres, pharmaceutical and medical device manufacturing plants, food processing plants, brewing plants or any other commercial buildings. The ZEM-61 can also be used to monitor micro-generators such as wind turbines, CHP systems and PV arrays.

APPLICATIONS

The ZEM-61 is a highly accurate, wireless 3-phase electricity monitor. It can monitor energy consumption patterns in equipment and buildings remotely via the NGR-30 Gateway. This provides facility and energy managers with targeted energy consumption information essential for increasing efficiency and reducing overall power consumption.

The ZEM-61 can be configured with a range of CT’s and Rogowski coils to measure currents from 0.1A to 3kA per phase. A list of CT options is available on the back of this data sheet.

INTRODUCTION

FEATURES

• Easy to Install and Commission

• Wide Voltage Input Range (75V to 265V)

• Wide Current Measurement Range: 0.1A to 3kA

• Class 1 Accuracy, +/- 1% or better

• Clip-on CT’s are included and pre-calibrated

• Waterproof Polycarbonate Enclosure

• Fully Wireless Communications

• Wireless Range up to 300m (LoS)

• Reports kWh, PF, V, I, kVA & more per phase

• On-board logging, up to 10,000 data points

• Dimensions (LxWxH) 192mm x 128mm x 40mm

• Self-healing mesh network

• Relays data from other wireless nodes

• 2.4GHz ISM band Zigbee® Wireless radio

• Fully secure communications: 128-bit AES encryption

• Over-the-air software upgrade capability



Page

04

ESD-001-01

[ ZEM-61 Wireless 3-Phase Electricity Monitor - Specification]

Current 0.1 - 3kA + (Range of Current Sensors Available)

+/- 1%

0.1ACurrent Resolution

Current Accuracy

Current Measurement Range

kWh, PF, kVAh +/- 1%

0.01 kWh

+/- 1%Power Factor Accuracy

kWh Resolution

kWh Accuracy

1%

+/- 1%

0.01 kVAhkVAh Resolution

kVAh Accuracy

Power Factor Resolution

Certification CE

Class 1Metering Standard

Certification

Wireless Technology Zigbee® Pro

2.4 Ghz ISM Band


Radio Frequency

Radio Technology




Rx Sensitivity

Max Tx Power

Security 128-bit AES EncryptionEncryption

Physical 192 x 128 x 40 mm

0.35kg


Weight

Dimensions (LxWxH)

Polycarbonate Plastic, IP67 ratedEnclosure

Operating Conditions -40°C to +85°C

up to 80% (non-condensing)Operating Humidity


Wireless Range up to 50m

up to 300m (direct line of sight)Outdoor Range

Indoor Range

Voltage 75V - 265V, Three Phase AC, 50/60Hz

+/- 1%

0.1 VoltVoltage Resolution

Voltage Accuracy

Input Voltage Range

75V - 470V ACVoltage Measurement Range



Page

05

ESD-001-01

CT Option 2 ZEM-61-300-2m

1A - 300A

360AMax. Continuous Current

Current Range

Product Code

24mmAperture Diameter

Rogowski Coil Option 1 ZEM-61-r1k-120c

10A - 1000A


Current Range

Product Code


Rogowski Coil Option 2 ZEM-61-r3k-120c

30A - 3000A


Current Range

Product Code


Please note some CT cable lengths can be specified. Refer to the price list for more information. If custom CT’s are required, please contact [email protected]


6A - 600A


Current Range

Product Code



0.1A - 120A


Current Range

Product Code


ZEM-61-120-2m ZEM-61-300-2m[120A, 16mm] [300A, 24mm]

ZEM-61-600-2m[600A, 36mm]

ZEM-61-rXk-120c[see below]

[ ZEM-61 Wireless 3-Phase Electricity Monitor - CT Options]

Ordering Codes 120A CT’s

300A CT’s

600A CT’sZEM-61-600-2m

ZEM-61-300-2m

ZEM-61-120-2m

1000A Rogowski CoilsZEM-61-r1k-120c

ZEM-61-r3k-120c 3000A Rogowski Coils



Page

06

ESD-001-00

Data Sheet : ZEM-30 : Wireless Single Phase Electricity Monitor

The ZEM-30 is suitable for monitoring power consumption in light machinery, single phase equipment or small commercial buildings. It can be used to monitor lighting circuits, HVAC systems, boilers, telecoms equipment, servers, kitchen equipment, hotel rooms, trade show stands, commercial & residential buildings or any other single phase load up to 300A. There is also a 10A in-line version available with C13/14 plug and socket. The ZEM-30 can also be used for monitoring renewable energy sources such as wind turbines and PV arrays or for monitoring electric vehicle charging in homes or public charging stations.

APPLICATIONS

The ZEM-30 is a highly accurate, wireless single-phase electricity monitor. It can monitor energy consumption patterns in equipment and buildings remotely via the NGR-30 Gateway, which provides building and energy managers with energy consumption information essential for increasing efficiency, reducing overall power consumption and monitoring usage patterns.

The ZEM-30 has on-board wireless communications for easy installation and minimum disruption to normal operations and is housed in a waterproof polycarbonate enclosure.

INTRODUCTION

FEATURES


• Wide Voltage Input Range (75V to 265V)

• Wide Current Measurement Range: 0.1A to 300A

• Class 1 Accuracy, +/- 1% or better

• Clip-on CT’s are included and pre-calibrated

• In-line version with internal 10A CT available




• Reports kWh, PF, V, I & more

• On-board logging, up to 10,000 data points



• Relays data from other wireless nodes






Page

07

ESD-001-01

Voltage / Current 75V - 265V AC, 50/60Hz

+/- 1%

0.1 VoltVoltage Resolution

Voltage Accuracy

Input Voltage Range

0.1 - 300A

+/- 1%

0.1ACurrent Resolution

Current Accuracy

Current Measurement Range

kWh, PF, kVAh +/- 1%

0.01 kWh

+/- 1%Power Factor Accuracy

kWh Resolution

kWh Accuracy

1%

+/- 1%

0.01 kVAhkVAh Resolution

kVAh Accuracy

Power Factor Resolution

Certification CE

Class 1Metering Standard

Certification


2.4 Ghz ISM Band


Radio Frequency

Radio Technology




Rx Sensitivity

Max Tx Power



0.35kg


Weight

Dimensions (LxWxH)


-40°C to +85°C





Indoor Range

[ ZEM-30 Wireless Single Phase Electricity Monitor - Specification]

IEC C13 / C14 Plug & Socket on ZEM-30i

Ordering Codes 80A CT

120A CT

10A In-Line CTZEM-30-10i

ZEM-30-120-2m

ZEM-30-80-2m



Page

08

ESD-001-00

Data Sheet : TES-11 / HTS-10 : Wireless Temperature / Humidity Sensor

The TES-11 and HTS-10 are designed for remotely monitoring temperature and humidity for environmental monitoring and energy management applications.

These products are designed for monitoring ambient temperature and relative humidity in a wide variety of environments such as warehouses, clean rooms, pharmaceutical manufacturing plants, residential or commercial buildings, data centres, hotels, offices and in manufacturing processes that require temperature or humidity controlled environments.

APPLICATIONS

The TES-11 is a fully wireless, accurate ambient temperature sensor which can record temperature data at predefined intervals and make this data available via EpiSensor’s NGR-30 Gateway. The unit has on-board wireless communications and is housed in a vented ABS enclosure. The HTS-10 version also includes a relative humidity sensor.

At 30 minute reporting intervals, the battery can last up to 10 years under normal conditions. The enclosure measures just 71mm x 71mm x 27mm and can be wall mounted using keyhole slots or sticky pads.

INTRODUCTION

FEATURES

• Easy to Install and Commission - stick on / wall mountable

• Accurate Temperature Sensor: +/- 0.2°C

• Wide Temperature Range: -20°C to + 60°C

• Relative Humidity Accuracy: +/- 3% (normal range)

• Battery Life > 10 years (30 min reporting interval)

• On-board data logging: up to 10,000 data points

• Vented ABS Plastic Enclosure










Page

09

ESD-001-01

Certification CECertification


2.4 Ghz ISM Band


Radio Frequency

Radio Technology




Rx Sensitivity

Max Tx Power



150g

Wall Mounting HolesMounting

Weight

Dimensions (LxWxH)

ABS Plastic, VentedEnclosure-40°C to +85°C





Indoor Range

Battery up to 10 years (30 min reporting interval)

Lithium Thionyl Chloride (permanent)Type

Lifetime

[ TES-11 / HTS-10 Wireless Temperature / Humidity Sensor - Specification ]

Humidity (HTS-10 only) 0% RH - 100% RH

+/- 3% RH

2% RHHysteresis

RH Accuracy (normal range)

Full Humidity Range

+/- 0.5% RHRepeatability

11% RH - 89% RHNormal Humidity Range

0.1%Humidity Resolution

-20°C - +60°C

-40°C - +85°C

+/- 0.2°CTemp. Accuracy (normal range)

Full Temperature Range

Normal Temperature Range

+/- 0.4°C

0.1°CTemperature Resolution

Temp. Accuracy (full range)

Temperature

Ordering Codes Temperature

Temperature & HumidityHTS-10

TES-11



Page

10

ESD-001-00

Data Sheet : TES-21 / TES-22 : Wireless Probe Temperature Sensor

The TES-21 can be used for monitoring probe temperature in pharmaceutical & manufacturing plants, data centers, food processing and brewing industries, hotels, offices and for any manufacturing processes that require temperature controlled environments.

The dual probe version is particularly useful for monitoring temperature in liquids or in areas where a temperature differential is of interest, such as the inlet and exhaust air temperature in a server cabinet or the flow and return temperatures in heating and cooling systems.

APPLICATIONS

The TES-21 is a fully wireless, accurate probe temperature sensor which can record temperature data at predefined intervals and make this data available to users via EpiSensor’s NGR-30 Gateway for use in environmental monitoring and energy management applications. There are single and dual probe versions available (dual probe: TES-22)

The temperature sensor is housed in a waterproof polycarbonate enclosure so it can be deployed in a wide range of harsh environments and the on-board lithium battery is designed to last up to 10 years (at 30 min reporting interval).

INTRODUCTION

FEATURES


• Accurate Temperature Sensor: +/- 0.2°C

• Wide Temperature Range: -20°C to + 60°C

• Various temperature probes available

• Battery Life > 10 years (30 min reporting interval)












Page

11

ESD-001-01

Sensor [depends on probe used, see probe options]

[depends on probe used, see probe options]

+/- 0.2°CAccuracy (normal range)

Full Temperature Range

Normal Temperature Range

+/- 0.4°C

0.1°CTemperature Resolution

Accuracy (full range)



2.4 Ghz ISM Band


Radio Frequency

Radio Technology




Rx Sensitivity

Max Tx Power



150g


Weight

Dimensions (LxWxH)

Polycarbonate, Waterproof (IP67)Enclosure






Indoor Range

Battery up to 10 years (30 min reporting interval)


Lifetime

[ TES-21 / TES-22 Wireless Probe Temperature Sensor - Specification ]



Page

12

ESD-001-01

Option 1 TES-21-w1.5

Waterproof, Plastic, 1.5m length

Liquids, pharmaceuticals, warehousesApplication

Type

Product Code

-20°C - +60°CNormal Temperature Range

-40°C - +85°CFull Temperature Range

Option 2 TES-21-w0

Waterproof, Plastic, Short Probe


Type

Product Code


Outdoor ambient temperature monitoringApplication

Option 3 TES-21-p2.0

Stainless Steel, Pipe Probe, 2.0m length


Type

Product Code


Pipe temperature monitoring Application

Probe Option 1[Waterproof, Plastic,

1.5m length]

Probe Option 2[Waterproof, Plastic,

Short Probe]

Probe Option 3[Stainless Steel, Pipe Probe, 2.0m length]

[ TES-21 / TES-22 Wireless Probe Temperature Sensor - Probe Options ]

Option 4 TES-22-w1.5

Dual Waterproof, Plastic, 1.5m length


Type

Product Code


Liquids, pharmaceuticals, data centers, weatherApplication

Option 5 TES-22-p2.0

Dual Stainless Steel, Pipe Probe, 2.0m length


Type

Product Code


Pipe temperature differential monitoringApplication

Probe Option 4[Dual Waterproof, Plastic,

1.5m length]

Probe Option 5[Dual Stainless Steel,

Pipe Probe, 2.0m length]

Ordering Codes Single Waterproof, Plastic, 1.5m length

Single Waterproof, Plastic, Short Probe

Single Stainless Steel, Pipe Probe, 2.0m lengthTES-21-p2.0

TES-21-w0

TES-21-w1.5

Dual Waterproof, Plastic, 1.5m lengthTES-22-w1.5

Dual Stainless Steel, Pipe Probe, 2.0m lengthTES-22-p2.0



Page

13

ESD-001-00

Data Sheet : ZIO-20 : Wireless 4-20mA Current Loop Sensor

The ZIO-20 can be used to monitor a wide range of analog parameters that relate either directly or indirectly to energy usage in commercial and industrial buildings.

An example of indirect energy usage would be to monitor flow rates in a compressed air line; if a high flow rate is maintained outside of production hours this could indicate a leak in the system, or incorrect configuration of the control system. An example of direct energy monitoring via analog current loop would be tracking the level of fuel oil in a tank.

APPLICATIONS

EpiSensor’s ZIO-20 is a rugged, wireless mains powered analog current loop monitor. It can be used to monitor flow rates, pressures, levels, pH or any other energy related output which uses the industry standard 4 - 20mA current loop.

The ZIO-20 has a reliable on-board mains power supply and secure wireless Zigbee™ mesh communications for easy installation and minimum disruption to normal operations. The unit is housed in a waterproof polycarbonate enclosure and has a wireless range of up to 300m outdoors.

INTRODUCTION

FEATURES


• Accuracy of +/- 2%

• Current Range: 4mA - 20mA

• Voltage Range: 0 - 3V

• Low power consumption: ~ 1.1W


• Max, Min, Average and Instantaneous sensors









Change Photo



Page

14

ESD-001-01



2.4 Ghz ISM Band


Radio Frequency

Radio Technology




Rx Sensitivity

Max Tx Power



0.35kg


Weight

Dimensions (LxWxH)






up to 300m (direct line of sight)Outdoor Range Extension

Indoor Range Extension

Supply Voltage 75V - 265V AC, 50/60Hz

1.1WPower Consumption

Input Voltage Range

[ ZIO-20 Current Loop Sensor - Specification ]

Ordering Code Wireless 4-20mA Current Loop SensorZIO-20

Current Loop 4 - 20mA

0 - 3V

+/- 2%Accuracy

Voltage Range

Current Range

50mAMax. Current

Min, Max, Average, InstantaneousSensors



Page

15

ESD-001-00

Data Sheet : ZVO-20 : Wireless 0 - 10V Voltage Signal Monitor

The ZVO-20 can be used to monitor a wide range of analog parameters that relate either directly or indirectly to energy usage in commercial and industrial buildings.

An example of indirect energy usage would be to monitor flow rates in a compressed air line; if a high flow rate is maintained outside of production hours this could indicate a leak in the system, or incorrect configuration of the control system. An example of direct energy monitoring via 0 - 10V voltage signal would be tracking the level of fuel oil in a tank.

APPLICATIONS

EpiSensor’s ZVO-20 is a rugged, wireless mains powered voltage signal monitor. It can be used to monitor flow rates, pressures, levels, pH or any other energy related output which uses the industry standard 0 - 10V signal.

The ZVO-20 has a reliable on-board mains power supply and secure wireless Zigbee™ mesh communications for easy installation and minimum disruption to normal operations. The unit is housed in a waterproof polycarbonate enclosure and has a wireless range of up to 300m outdoors.

INTRODUCTION

FEATURES


• Accuracy of +/- 2%

• Voltage Range: 0 - 10V

• Low power consumption: ~ 1.1W


• Max, Min, Average and Instantaneous sensors









Change Photo



Page

16

ESD-001-01



2.4 Ghz ISM Band


Radio Frequency

Radio Technology




Rx Sensitivity

Max Tx Power



0.35kg


Weight

Dimensions (LxWxH)








Mains PSU Voltage 75V - 265V AC, 50/60Hz


Input Voltage Range

Ordering Code Wireless 0 - 10V Voltage Signal MonitorZVO-20

Voltage Sensor 0 - 10V

+/- 2%

12VMax. Voltage

Accuracy

Voltage Range

75mAMax. Current

Min, Max, Average, InstantaneousSensors



Page

17

ESD-001-00

Data Sheet : ZPC-10 / ZPC-20 : Wireless Pulse Counter

The ZPC is designed for situations where a legacy utility meter exists and retrofit of additional metering equipment is difficult or unnecessary.

In data centers or manufacturing plants, facility managers may not be able to disconnect an electricity or gas supply, but may have access to a pulse output from existing meters. The ZPC is an extremely rugged, cost effective and easy-to-deploy solution for monitoring legacy utility meters within commercial and industrial buildings.

Battery Powered: ZPC-10 / Mains Powered: ZPC-20

APPLICATIONS

The ZPC is a wireless battery powered pulse counter used to interface to electricity, water and natural gas utility meters. The unit has on-board Zigbee™ wireless communications and is housed in a waterproof polycarbonate enclosure.

Pulse readings are reported to the NGR-30 Gateway at a configurable interval. Large networks of ZPC’s can connect to the Gateway and deliver data to a central location for detailed analysis of energy and water consumption data. If wireless communications break down, up to 10,000 data will be logged automatically.

INTRODUCTION

FEATURES


• Mains powered and battery powered versions

• Pulse frequency up to 4Hz (battery) / 30Hz (mains)

• Battery Life up to 10 years (subject to pulse frequency and reporting interval)










Change Photo



Page

18

ESD-001-01



2.4 Ghz ISM Band


Radio Frequency

Radio Technology




Rx Sensitivity

Max Tx Power



150g


Weight

Dimensions (LxWxH)

Polycarbonate, Waterproof (IP67)Enclosure






Indoor Range

Battery (ZPC-10 only) up to 10 years, 30min reporting interval


Lifetime

Pulse Input Single Channel

4 Hz (battery) / 30 Hz (mains)

10 mSMin. Pulse Length

Max. Pulse Frequency

Channels

5 V

0.01 VMin. Pulse Voltage

Max. Pulse Voltage

[ ZPC-10 / ZPC-20 Wireless Pulse Counter - Specification ]

Ordering Code Battery Powered Wireless Pulse CounterZPC-10

Mains Powered Wireless Pulse CounterZPC-20



Page

19

ESD-001-00

Data Sheet : ZHM-10 : Wireless Heat Metering Kit

The ZHM-10 provides energy managers with essential information to control energy usage and costs of HVAC equipment in commercial and industrial buildings. The information reported can be used to calculate the efficiency of boilers, the coefficient of performance (CoP) of chillers or simply for energy accounting purposes to assign cost to a process or an area. The ZHM-10 heat metering kit is easy to deploy and will automatically join the wireless mesh network. The unit is mains powered and has a wide voltage input range.

APPLICATIONS

The ZHM-10 Heat Metering Kit consists of a flow meter, two temperature probes, heat calculator and a wireless interface to seamlessly integrate with EpiSensor’s NGR-30 Gateway to monitor heating or cooling. When the heat calculator has been programmed with the liquid type (usually water) it monitors a temperature differential and the flow rate to calculate the total heating or cooling action in a circuit. The unit is housed in a waterproof enclosure, is mains powered and includes on-board fully wireless communications based on the Zigbee standard.

INTRODUCTION

FEATURES


• Measures kWh, Flow T, Return T, ∆ T

• Various flow meter and temperature probe options


• Waterproof Enclosure



• Dimensions (LxW) 144 x 112 mm, & 112 x 90mm





Change Photo



Page

20

ESD-001-01



2.4 Ghz ISM Band


Radio Frequency

Radio Technology




Rx Sensitivity

Max Tx Power


Physical 144 x 112 mm, & 112 x 90mm

2kg


Weight

Dimensions (LxWxH)


Operating Conditions +5°C to +55°C






[ ZHM-10 - Wireless Heat Metering Kit Specification ]

Heat Meter kWh, Flow T, Return T, ∆ T

12Hz

40mSMin. Flow Meter Pulse Length

Max. Flow Meter Pulse Frequency

Parameters Measured

0°C to +190°CTemp. Measurement Range

PT-100 or PT-500

< 3VPulse Input Voltage

Temperature Sensor Type

3µAPulse Input Current

Ordering Code Heat Metering Kit w/ Unico DN20 flow meterZHM-10



Page

21

ESD-001-00

Data Sheet : RTO-21 : Wireless Range Extender

The RTO-21 is perfect for connecting wireless nodes which have been deployed at the extremities of large buildings, back to a Gateway which would otherwise be out of wireless range.

Many RTO-21’s can be used in a chain to extend the wireless sensor network to even greater distances.

Increasing the number of range extenders also improves the strength and reliability of the mesh network by providing redundant paths for nodes to link to the Gateway.

APPLICATIONS

The RTO-21 Range Extender can increase the range of a wireless sensor network by up to 300m. Data is automatically routed from wireless nodes in a mesh network through the range extender and back to the NGR-30 Gateway.

It includes an internal mains power supply which is designed to work over a wide range of voltages and on-board Zigbee wireless communications.

The RTO-21’s enclosure is fully waterproof, which is ideal for use in harsh industrial or outdoor environments.

INTRODUCTION

FEATURES


• Extend Wireless Range by up to 300m (LoS)

• Routes data from other wireless nodes

• Integrated mains power supply

• Wide voltage input range








Change Photo



Page

22

ESD-001-01



2.4 Ghz ISM Band


Radio Frequency

Radio Technology




Rx Sensitivity

Max Tx Power



0.35kg


Weight

Dimensions (LxWxH)








Supply Voltage 75V - 265V AC, 50/60Hz


Input Voltage Range

[ RTO-21 Wireless Range Extender - Specification ]

Ordering Code Wireless Range Extender (omni-directional)RTO-21

EpiSensor Product Catalogepisensor.com/wp-content/uploads/2012/11/EpiSensor... · ·...

Documents

Transcript of EpiSensor Product Catalogepisensor.com/wp-content/uploads/2012/11/EpiSensor... · ·...