Environment “Le Catalogue” - WeldingPartnerweldingpartner.pl/wp-content/uploads/2017/03/... ·...
Transcript of Environment “Le Catalogue” - WeldingPartnerweldingpartner.pl/wp-content/uploads/2017/03/... ·...
www.weldline-alw.com
One big stepfor Air Liquide Weldingand one giant leapfor the welder’s environment
“Le Catalogue”
Creating a ProfessionalEnvironment
Le CatalogueWELDINE is the “Welder’s Environment” brand of theAir Liquide Welding group. This brand offers a largerange of tools and accessories dedicated for weldingapplications (cables, earth clamps, torches, brushesand hammers, sprays…) as well as individual protectiveequipment for the welder (gloves, clothes, goggles,masks…) and of his environment (strips curtains, etc..).
The WELDLINE products are available through thecommercial networks of the Air Liquide Welding group(OERLIKON, SAF-FRO or CEMONT). Continuousresearch of the best products, permanent availability,high quality products at the right price, compliance withthe most rigorous European standards are the mainmaster words that describe the WELDLINE offer witha major objective: the customer’s satisfaction...
Creating a ProfessionalEnvironment
This trademark is a triple commitmentof the Air Liquide Welding group:
� The choice of quality products Chosen by an international team, WELDLINE products complywith European standards, aiming to better meet customerrequirements.
� Balancing quality with priceThe purchasing power of the Air Liquide Welding groupfor the benefit of their customers.
� Optimized logistics Single image, single stock, single numbering to increaseproduct availability.
PROFESSIONAL WELDING PRODUCTS BYWELDLINE is an Air Liquide Welding trademark
Summary
Creating a ProfessionalEnvironment
PROFESSIONAL WELDING PRODUCTS BYWELDLINE is an Air Liquide Welding trademark
1 - MMA welding• Electrode holders ..................... 1-1 to 1-5• MMA kits (electrode holder with cable
+ clamp with cable) ................................. 1-6• Gouging torches ................................ 1-7• Gouging electrodes ........................... 1-8• Ovens / Quivers ..................... 1-9 to 1-10
2 - MIG/MAG welding• MIG/MAG welding torches ....... 2-1 to 2-5• Accessories ........................................ 2-6• Anti-spatters ....................................... 2-7• MIG consumables .............................. 2-8
3 - TIG welding• TIG torches .............................. 3-1 to 3-4• Tungsten electrodes ................ 3-5 to 3-6• TIG consumables ............................... 3-7• Miscellaneous .................................... 3-8
4 - Other arc welding• Cables and connectors ........... 4-1 to 4-2• Clamps ................................... 4-3 to 4-4• Miscellaneous ......................... 4-5 to 4-6• Ceramic backings ................... 4-7 to 4-9
5 - Liquids and sprays• Cooling liquids for torches .................. 5-1• Leakage control .................................. 5-1• Anti-spatters ....................................... 5-2• Anti-corrosion ..................................... 5-3• Sharpening of tungsten electrodes ..... 5-3• Cracks detection ....................... 5-4 to 5-5• Stainless steel treatment..................... 5-6
6 - Flame• Hoses ................................................. 6-1• Automatic roller for oxygas hoses ...... 6-1• Quick action coupling ........................ 6-2• Cutting nozzles and others flame ....... 6-3• Leakage control .................................. 6-4
7 - Cutting and grinding disks• Cutting and grinding disks ...... 7-1 to 7-4
8 - Welder protection• Helmets - choice of head
protection ........................................... 8-1• Electronic helmets ................... 8-2 to 8-4• Passive helmets
and handshields .................... 8-5 to 8-11• Goggles and spectacles ...... 8-12 to 8-16• Welding glasses .................. 8-17 to 8-18• Leather clothes ................... 8-19 to 8-24• Gloves ................................. 8-25 to 8-32• Cotton clothes .................... 8-33 to 8-34• Shoes ................................. 8-35 to 8-41
9 - Shop protective products• Protection strips ...................... 9-2 to 9-6• Curtains and screens ............ 9-7 to 9-15• Heat resistant fabrics .......... 9-16 to 9-19• Accessories
(for curtains and strips) ............. 9-20 to 9-22• Sound insulating walls
and elements ...................... 9-23 to 9-30
1 - MMA welding
• Electrode holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 to 1-5
• MMA kits(electrode holder with cable + clamp with cable). . 1-6
• Gouging torches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
• Gouging electrodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
• Ovens / Quivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 to 1-10
For: clamps, connectors, cables,hammers, miscellaneous, ceramic backings,see chapter “Other arc welding”
PROFESSIONAL WELDING PRODUCTS BYWELDLINE is an Air Liquide Welding trademark
1M
MA
WE
LDIN
G
Electrode holders
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
� In Europe it is mandatory that the supplier conformsto the European standards on these products, for Healthand Safety reasons.
The CE marking confirms conformity of the product to thesestandards
DON’T BUY ELECTRODE HOLDERS WITHOUT THISMARKING.
� Selection criteria - the maximum electrode diameter required,that in turn dictates the maximum amperage and subsequentlythe size of the welding cable.
� Once the above criteria are established the remaining choiceis one of personal preference.
Screw typeVery secure grip of the electrode that gives the possibilityof twisting the electrode once tightened.
Lever typeSecure grip of the electrode betweenthe jaws with pre defined angles for the electrode position, easybutt ejection.
Selection criteria for the different
type of electrode holders can be
seen on the enclosed pages.
Naturally the electrode holder will
accept all sizes of electrode to the
maximum diameter stated.
The lever type electrode holders are
divided into two sections, large
opening type - that has the optional
pre defined angles and closed head
type - that has only a single position
option.
The choice of an electrode holderfollows several criteria.
EN 60974-11
1-1
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Electrode holders
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com
Scr
ew t
ype
str
aig
htS
crew
type
cur
veScrew type electrode holders
TWIST 200 3.2 25
TWIST 400 5.0 50
VESTALETTE 4.0 35
STUBBY 6.3 50
MASTER 8.0 95
VESTALE 8.0 95
CURVA 400 5.0 50
CURVA 600 6.3 70
Choice criteriaMaximum Maximum
2004
-488
1794
-21
2004
-215
x09
47-6
509
47-6
820
04-4
97
A Ø Electrode WeightName Cat N° (35%) cable diameter (g) Customer’s benefit
(mm2) (mm)
TWIST 200 W 000 010 565 200 25 3.2 335 Economical electrode holders. Insulation class: A.
TWIST 400 W 000 010 566 300 50 5.0 480 Well balanced, rubber handle, left hand thread.
W 000 010 035 Light and totally insulated, fibre glass headVESTALETTE W 000 010 883* 250 35 4.0 295 long life duration, left hand thread. Insulation class: A.
W 000 010 036 Well known, fibre glass single part head.STUBBY W 000 010 879* 400 50 6.3 450 Spare parts available, right hand thread. Insulation class: A.
MASTER W 000 010 037 500 95 8.0 530 Well known, fibre glass single part head.W 000 010 882* Spare parts available, right hand thread. Insulation class: A.
W 000 010 038 THE heavy duty electrode holder. Insulation class: A.VESTALE W 000 010 880* 500 95 8.0 470 High resistance. Fibre glass head, left hand thread.
CURVA 400 W 000 010 573 300 50 5.0 540Curved electrode holders. Insulation class: B.
CURVA 600 W 000 010 574 400 70 6.3 720
* Cat. number for display
Spare parts Cat N°
MASTER - Head W 000 011 082
STUBBY - Head W 000 260 716
MASTER - Insulation W 000 011 083
STUBBY/MASTER - Spring W 000 011 084
STUBBY/MASTER - Handle W 000 011 077
Spare parts Cat N°
STUBBY - Body W 000 011 085
VESTALE - Handle W 000 011 086
VESTALE - Head W 000 011 087
WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY 1-2
1M
MA
WE
LDIN
G
Electrode holders
A Ø Electrode WeightName Cat N° (35%) cable diameter (g) Customer’s benefit
(mm2) (mm)
CAÏMAN 200 W 000 010 567 200 25 3.2 370 Economical electrode holders. CAÏMAN 400 W 000 010 568 300 50 5.0 425 Polyamide handle, fibre glass reinforced.
CAÏMAN 600 W 000 010 569 400 70 6.3 500 Brass jaws. Insulation class: B.
SAMSON ECO 300 W 000 010 622 300 70 6.3 450 Light version, well known SAMSON
SAMSON ECO 500 W 000 010 623 500 95 8.0 530 electrode grip. Insulation class: A.
Lever type opened head electrode holders
Choice criteria
Maximum Maximum
CAÏMAN 200 3.2 25
CAÏMAN 400 5.0 50
CAÏMAN 600 6.3 70
SAMSON ECO 300 6.3 70
SAMSON ECO 500 8.0 95
2004
-491
2004
-648
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY1-3
Electrode holdersLever type closed head electrode holders
Choice criteria
Spare parts OPTIMUS Cat N°
300 Insulating head W 000 010 107
300-400-500 Screw M 4X6 W 000 010 108
300 Lever W 000 010 109
300-400-500 Spring W 000 010 110
300 Spring cap W 000 010 111
300 Hinge pin W 000 010 112
300 Body W 000 010 113
300 Cable screw W 000 010 116
Spare parts OPTIMUS Cat N°
300 Handle W 000 010 114
400-500 Insulating head W 000 010 115
400-500 Lever W 000 010 117
400-500 Spring cap W 000 010 119
400-500 Hinge pin W 000 010 120
400-500 Body W 000 010 121
400-500 Cable screw W 000 010 122
400-500 Handle W 000 010 123
Spare parts COBRA Cat N°
Head W 000 011 088
Maximum Maximum
SEGURA 300 4.0 35
SEGURA 400 5.0 50
SEGURA 600 6.3 70
COBRA 6.3 50
OPTIMUS 300 6.3 70
OPTIMUS 400 8.0 95
OPTIMUS 500 8.0 95
2004
-647
1198
-058
2004
-493
A Ø Electrode WeightName Cat N° (35%) cable diameter (g) Customer’s benefit
(mm2) (mm)
SEGURA 300 W 000 010 570 300 35 4.0 415 Economical models. SEGURA 400 W 000 010 571 300 50 5.0 570 Nylon handle.
SEGURA 600 W 000 010 572 400 70 6.3 590 Brass jaws. Insulation class: B.
COBRAW 000 010 039
300 50 6.3 420 Light and multi purpose. Insulation class: A.W 000 010 881*
OPTIMUS 300 W 000 010 410 300 70 6.3 460
OPTIMUS 400 W 000 010 411 400 95 8.0 560
OPTIMUS 500 W 000 010 412 500 95 8.0 620
* Cat. number for display
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY 1-4
1M
MA
WE
LDIN
G
High quality electrode holder. Well-known forintensive use and powerful grip on the electrodes.Specially design for heavy duty works with acomfortable handle. Insulation class: A.
Electrode holders
A Ø Electrode WeightName Cat N° (35%) cable diameter (g) Customer’s benefit
(mm2) (mm)
HOBBY 200 W 000 010 575 200 25 4.0 135An industrial design for a “DIY” use.Insulation class: B.
Hobby electrode holders
Choice criteria
Light duty electrode holders
Choice criteria
A Ø Electrode WeightName Cat N° (35%) cable diameter
(g)Customer’s benefit
(mm2) (mm)
CAÏMY 200 W 000 010 576 200 25 3.2 220A small professional tool for light works.Insulation class: B.
Maximum Maximum
Maximum Maximum
HOBBY 200 4.0 25
CAÏMY 200 3.2 25
2004
-496
2004
-486
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY1-5
MMA kitsKits of accessories for MMA welding: electrode holders,earth clamps, cables and connectors, already assembled.
Advantages:• “Ready to weld”.• A simple and full range in relation with all welding machines.• Save 30 minutes of assembly time, before to weld.• Recommendations in relation to welding processes.
The kits choice depends of several criteria:• Sections of machine sockets:
- Plugs of 9 mm diameter correspond to a cable cross-sectionbetween 16 mm2 and 25 mm2.
- Plugs of 13 mm diameter correspond to a cable cross-sectionbetween 35 mm2 and 50 mm2 (max 90 mm2).
• Application & intensity
The range:• First digits describe cable diameter.• Second digits describe type of connector.
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Cat N° KitI max Electrode Cable
Earth clampCable Plug MMA power sources' types
at 35% holder length length diameter and applications
W 000 260 680 16C25 200 A HOBBY 200 3 m HIPPO 200 2 m 9 mm Small intensity power sources for occasionnal welding
W 000 011 138 25C25 200 A CAIMAN 200 3 m HIPPO 200 3 m 9 mm Small intensity power sourcesfor semi professional welding
W 000 260 683 25C25+ 300 A SEGURA 300 3 m HIPPO 400 2 m 9 mm Small intensity power sourcesfor working site up to Ø 4 mm
High intensity power sourcesW 000 260 684 25C50 300 A SEGURA 300 3 m HIPPO 400 3 m 13 mm for intensive use (up to Ø 4 mm)
or work site
High intensity power sourcesW 000 011 139 35C50 300 A SEGURA 300 4 m HIPPO 400 4 m 13 mm for intensive use (up to Ø 4 mm)
or work site
High intensity power sourcesW 000 260 681 50C50 300 A SEGURA 400 4 m HIPPO 400 4 m 13 mm for intensive use (up to Ø 5 mm)
or work site
High intensity power sourcesW 000 260 682 50C50+ 400 A SEGURA 600 4 m HIPPO 600 4 m 13 mm for intensive use (up to Ø 6.3 mm)
or work site
1-6
1M
MA
WE
LDIN
G
2009
-163
Gouging torchesFLAIR®
The FLAIR® gouging torch is a high quality torch.The airflow can be regulated on the torch.Recommended air pressure is 7 bar.
A well known brand name in gougingprocess.
ARCAIR K2000 - K4000®
Current (A) Electrode Cat N°Ø max
1 FLAIR 600 600 10 mm - 3/8” W 000 010 136
2 FLAIR 1600 1600 19 mm - 3/4” W 000 010 118
Current (A) Electrode Cat N°Ø max
K 2000 450 6 mm - 1/4” W 000 010 999
K 4000 1000 13 mm - 1/2” W 000 010 992
K 2000 K 4000
Jaw W 000 011 033 W 000 010 991
Cable - W 000 010 993
Shell W 000 011 030 W 000 010 994
Head W 000 0110 31 W 000 010 995
Lever W 000 011 032 W 000 010 996
Body - W 000 010 997
Pushing kit - W 000 010 998
Spring - W 000 010 990
Spare parts
1311-01
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
2007-804
2007-805
1-7
1
2
EN 60974-11 type B
EN 60245-6
Graphite electrodes
CARBONAIRPointed electrodes
CARBONAIR PLUSJointed electrodes (no stub loss)
WELDLINE offers a completerange of graphite (carbon) electrodes for gouging.
This process requires a MMA direct current (DC) power source,a gouging torch and a compressed air source. Please find hereunder a selection table.
Description Quantity Gross weight I¯
I¯
Cat N° per box per box mini maxidiameter x length (mm) (thousand) kg A A bars m3/h
CARBONAIR 4 x 305 W 000 010 645 0.100 0.78 150 200 4.0 15
CARBONAIR 5 x 305 W 000 010 443 0.100 1.08 200 250 4.0 15
CARBONAIR 6.5 x 305 W 000 010 444 0.050 0.98 320 370 4.0 15
CARBONAIR 8 x 305 W 000 010 445 0.050 1.34 400 450 5.5 40
CARBONAIR 10 x 305 W 000 010 446 0.050 2.15 500 550 5.5 40
CARBONAIR 13 x 305 W 000 010 447 0.050 3.55 800 1 000 5.5 50
Description Quantity Gross weight I¯
I¯
Cat N° per box per box mini maxidiameter x length (mm) (thousand) kg A A bars m3/h
CARBONAIR PLUS 8 x 355 W 000 010 448 0.050 1.80 500 550 5.5 40
CARBONAIR PLUS 10 x 430 W 000 010 449 0.050 3.22 600 650 5.5 40
CARBONAIR PLUS 13 x 430 W 000 010 450 0.050 4.97 800 1 000 5.5 50
CARBONAIR PLUS 16 x 430 W 000 010 451 0.025 3.70 1000 1 200 6.9 60
CARBONAIR PLUS 19 x 430 W 000 010 452 0.025 5.17 1200 1 400 6.9 60
CARBONAIR
CARBONAIR PLUS
2004
-989
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY 1-8
1M
MA
WE
LDIN
G
PW8 and PW15 portable quivers are necessary, for electrodesmaintenance, near the welding working place. They preserve theelectrodes from moisture avoiding hydrogen inclusion in the welding joint.
PW8 and PW15 portable quivers are provided with a handle, useful formoving. They contain also an extractable basket that avoids waste of heat.PW8 and PW15 ovens are provided with build-in adjustable thermostat.
Ovens / QuiversWELDRY PW8 and PW 15Portable quivers
Technical data WELDRY MW2 WELDRY MW4 WELDRY MW6
Shelves number 2 4 6
Capacity for each shelf 1500 electrodes 1500 electrodes 1500 electrodes
Temperature regulation thermostat up to 300 °C
Power 2.7 kW 2.7 kW 4.5 kW
Capacity (weight and number of electrodes) 135 kg - 3 000 el. Ø 3.25 mm 270 kg - 6 000 el. Ø 3.25 mm 405 kg - 9 000 el. Ø 3.25 mm
Power supply Single phase 230 V - 50/60 Hz Three phase 380 V - 50/60 Hz
Internal size 720 x 510 x 350 mm 720 x 510 x 620 mm 720 x 510 x 890 mm
External size 830 x 690x 760 mm 830 x 690x 1400 mm 820 x 690x 1310 mm
Net weight 90 kg 123 kg 152 kg
Packaging dimension 850 x 710 x 780 mm 850 x 710 x 1420 mm 840 x 710 x 1330 mm
Gross weight 95 kg 135 kg 160 kg
Cat N° W 000120 430 W 000 120 431 W 000 120 454
MW6
PW8 PW15
MW4
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
On request: other models
(without thermostat – with thermometer
- with different power supply – stainless
steel or lacquered finishing)
Technical data WELDRY PW8 WELDRY PW15
Capacity (n. of electrodes) 100 electrodes Ø 3.25 mm 200 electrodes Ø 3.25 mm
Max temperature 180 °C - 200 °C
Power 0.13 kW 0.275 kW
Capacity 5 kg 10 kg
Power supply Single-phase 230 V - 50/60 Hz
Internal size 72 x 72 x 470 mm 100 x 100 x 470 mm
External size 140 x 180 x 630 mm 180 x 220 x 630 mm
Net weight 5 kg 8 kg
Packaging dimension 160 x 210 x 640 mm 210 x 240 x 660 mm
Gross weight 6 kg 9 kg
Cat N° W 000 120 427 W 000 120 428
MW ovens are used for keeping thetreatment of electrodes after the dryingcycle and before the welding process.They preserve the electrodes frommoisture avoiding hydrogen inclusion inthe welding joint.
Equipped with a digital control panel andtwo adjustable thermoregulators for airand heating elements protection,positioned in front of the oven.
1-9
2008
-578
WELDRY MWHolding ovens for MMA electrodes
2008
-579
MW2
2008
-616
2008
-577
2008
-576
EN 61000-6-2
EN 61000-6-3
EN 60204-1
Ovens / Quivers
This oven is used for electrode re-bakingtreatment, heating the electrodes between 350 °C-420 °C for a fixed time. In this way themoisture is removed and a good quality weldingwithout hydrogen intrusion is guaranteed.
Equipped with a digital control panel and twoadjustable thermoregulators for air and heatingelements protection, positioned in front of theoven, allows to set both drying and keepingcycles.
Technical data WELDRY CW3 WELDRY CW6 WELDRY CW9
Shelves number 3 6 9
Capacity (number of electrodes) 4 500 el. Ø 3.25 mm 9 000 el. Ø 3.25 mm 13 500 el. Ø 3.25 mm
Capacity 203 kg 404 kg 608 kg
Temperature regulation thermostat up to 500 °C
Number of resistances 3 6 9
Power 4.6 kW 9.1 kW 13.6 kW
Power supply Three-phase 380 V - 50/60 Hz
Internal size 560 x 740 x 560 mm 560 x 740 x 980 mm 560 x 740 x 1430 mm
External size 800 x 880x 1030 mm 800 x 880x 1480 mm 800 x 880x 1880 mm
Net weight 140 kg 200 kg 266 kg
Packaging dimension 820 x 900 x 1050 mm 820 x 900 x 1500 mm 820 x 900 x 1900 mm
Gross weight 150 kg 215 kg 280 kg
Cat N° W 000 120 466 W 000 120 467 W 000 120 468
WELDRY CWRe-baking ovens for MMA electrodes
This model of oven is used for re-baking submerged arc welding fluxes,heating the flux between 350 °C - 420 °C for a fixed time. The inside tank is stainless steel made to preventfrom risk of pollution.
The resistances are positioned inside thehopper for a direct contact to flux in order toobtain an optimal heating.
The build-in digital control equipment withdouble thermoregulator for air and resistancesprotection avoids the flux being damaged andallows to set both drying and keeping cycles.
WELDRY FW - Hopper ovens for flux
Technical data WELDRY FW100 WELDRY FW200 WELDRY FW400
Load Capacity 60 kg 160 kg 320 kg
Temperature regulation thermostat up to 500 °C
Power 4 kW 4 kW 7.9 kW
Power supply Three-phase 380/220 V - 50/60 Hz
Internal size 530 x 390 x 640 mm 690 x 690 x 740 mm 690 x 690 x 740 mm (each tank)
External size 670 x 709 x 1300 mm 825 x 819 x 1330 mm 1620 x 850 x 1340 mm
Net weight 90 kg 116 kg 210 kg
Height of the flap door for flux feeding �a = 500 mm �a = 450 mm
Packaging dimension 690 x 750 x 1 320 mm 850 x 860 x 1 350 mm 1 640 x 870 x 1 360 mm
Gross weight 100 kg 130 kg 225 kg
Cat N° W 000 120 469 W 000 120 470 W 000 120 471
�a
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
On request: other models
(with one or two hoppers - with single
or double digital control equipment)
1-10
1M
MA
WE
LDIN
G
CW9
2008
-571
CW3
2008
-569
CW6
2008
-570
On request: other models
(with fan ventilation system)
�a
2008
-574
2008
-573
EN 61000-6-2
EN 61000-6-3
EN 60204-1
FW100FW200
FW400
2008
-572
�a
PROFESSIONAL WELDING PRODUCTS BYWELDLINE is an Air Liquide Welding trademark
2 - MIG/MAG welding
• MIG/MAG torches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 to 2-5
• Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
• Anti-spatters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
• MIG consumables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
For: clamps, connectors, cables,hammers, miscellaneous, ceramic backings,see chapter “Other arc welding”
2M
IG/M
AG
WE
LDIN
G
Simplify your lifeThe 3 main considerations when choosing a MIG/MAGtorch are:
• Reliability: WELDLINE WMT torches have beendesigned to meet the rigorous demands of today’swelding environment, giving quality and reliability.
• Standardisation of the wear parts: WELDLINEWMT torches are compatible with the most commonwear parts available in Europe.
• Flexibility: WELDLINE WMT torches are equippedwith a very flexible coaxial cable and a knuckle jointwhich reduces the strain on the operative
Air cooled torches:Name Duty cycle General use Max wire Ø
at 60% (mm)
WMT 15A 180 A Thin plates, automotive industry 1.0
WMT 25A 230 A Thin plates, light fabrication 1.2
WMT 36A 340 A Vessel manufacture, steel structures 1.6
Water cooled torches:Name Duty cycle General use Max wire Ø
at 100% (mm)
WMT 500W 500 A Heavy duty, high production 2.4
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
MIG/MAG welding torches
2-1
2006
-521
x
EN 60974-7
2007-132
MIG/MAG welding torches
Applications:Car body, limited access welding, etc.
Advantages for clients:� Easy manoeuvrability � European standard
(ball joint articulation) connections
Ordering information: WMT 15A 3m: Cat. N° W 000 010 600
WMT 15A 4m: Cat. N° W 000 010 601
Cat. N° Description
W 000 010 730 Wear conduit, steel spirals 0.6-0.8 3M
W 000 010 731 Wear conduit, steel spirals 0.6-0.8 4M
W 000 010 733 Wear conduit, steel spirals 1.0-1.2 3M
W 000 010 734 Wear conduit, steel spirals 1.0-1.2 4M
Cat. N° Description
W 000 010 786 Conical nozzle 12.5 dia. WMT 15A
W 000 010 787 Conical nozzle 10.0 dia. WMT 15A
W 000 010 788 Cylindrical nozzle 16.0 dia. WMT 15A
Cat. N° Description
W 000 010 789 Spring
Cat. N° Description
W 000 010 820 Contact tube M6x25 0.6 Cu WMT 15A
W 000 010 821 Contact tube M6x25 0.8 Cu WMT 15A
W 000 010 822 Contact tube M6x25 1.0 Cu WMT 15A
W 000 010 823 Contact tube M6x25 0.6 CuCrZr WMT 15A
W 000 010 824 Contact tube M6x25 0.8 CuCrZr WMT 15A
W 000 010 825 Contact tube M6x25 1.0 CuCrZr WMT 15A
Technical specifications:Cooling: Air60% duty cycle:
- 180 A with C1 (EN 439): CO2
- 150 A with M21 (EN 439): Ar + CO2
Voltage class: L-113 V
Usable wires:- 0.6 to 1.0-mm diameter steel wire
Gas flow rate: 10 to 18 l/min
Original equipment:- Contact tube for 0.8-mm steel wire,- 12.5-mm conical nozzle,- wear conduit for 0.6 to 0.8-mm steel wire.
Main wear parts:� Wear parts compatible with the most common
standard in Europe.
WMT 15A
2004
-630
0807
-59
2004
-628
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY 2-2
2M
IG/M
AG
WE
LDIN
G
EN 60974-7
2007-135
MIG/MAG welding torchesWMT 25A
0807
-59
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Applications:Blacksmith work, thin steel and fabrication, etc.
Advantages for clients:� Easy manoeuvrability � European standard
(ball joint articulation) connections
Ordering information: WMT 25A 3m: Cat. N° W 000 010 602
WMT 25A 4m: Cat. N° W 000 010 603
WMT 25A 5m: Cat. N° W 000 010 604
Technical specifications:Cooling: Air60% duty cycle:
- 230 A with C1 (EN 439): CO2,- 200 A with M21 (EN 439): Ar + CO2
Voltage class: L-113 V
Usable wires:- 0.8 to 1.2-mm diameter steel wire- 1.0 to 1.2-mm diameter aluminium wire
Gas flow rate: 10 to 18 l/min
Original equipment:- Contact tube for 1.0-mm steel wire,- 14.0-mm conical nozzle,- wear conduit for 1.0 to 1.2-mm steel wire.
Main wear parts:� Wear parts compatible with the most common
standard in Europe.
2004
-630
2004
-628
Cat. N° Description
W 000 010 793 Spring
Cat. N° Description
W 000 010 826 Contact tube M6x28 0.8 Cu
W 000 010 827 Contact tube M6x28 1.0 Cu
W 000 010 828 Contact tube M6x28 1.2 Cu
W 000 010 830 Contact tube M6x28 0.8 CuCrZr
W 000 010 831 Contact tube M6x28 1.0 CuCrZr
W 000 010 832 Contact tube M6x28 1.2 CuCrZr
W 000 010 850 Contact tube M6x28 1.0 Al wire
W 000 010 851 Contact tube M6x28 1.2 Al wire
Cat. N° Description
W 000 010 790Conical nozzle14.0 dia. WMT 25A
W 000 010 791Conical nozzle12.0 dia. WMT 25A
W 000 010 792Cylindrical nozzle17.0 dia. WMT 25A
Cat. N° Description
W 000 010 720 Contact tube support M6x35
Cat. N° Description
W 000 010 730 Wear conduit, steel spirals 0.6-0.8 3M
W 000 010 731 Wear conduit, steel spirals 0.6-0.8 4M
W 000 010 732 Wear conduit, steel spirals 0.6-0.8 5M
W 000 010 733 Wear conduit, steel spirals 1.0-1.2 3M
W 000 010 734 Wear conduit, steel spirals 1.0-1.2 4M
W 000 010 735 Wear conduit, steel spirals 1.0-1.2 5M
W 000 010 736 Wear conduit, Teflon 1.0-1.2 3M
W 000 010 737 Wear conduit, Teflon 1.0-1.2 4M
W 000 010 738 Wear conduit, Teflon 1.0-1.2 5M
2-3
EN 60974-7
2007-138
MIG/MAG welding torchesWMT 36A
0807
-59
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Applications:Pressure vessels, mechanical welding, structural steel work, etc.
Advantages for clients:� Easy manoeuvrability � European standard
(ball joint articulation) connections
Ordering information: WMT 36A 3m: Cat. N° W 000 010 605
WMT 36A 4m: Cat. N° W 000 010 606
WMT 36A 5m: Cat. N° W 000 010 607
Technical specifications:Cooling: Air60% duty cycle:
- 360 A with C1 (EN 439): CO2,- 330 A with M21 (EN 439): Ar + CO2
Voltage class: L-113 V
Usable wires:- 0.8 to 1.6-mm diameter steel wire- 1.0 to 1.6-mm diameter aluminium wire
Gas flow rate: 10 to 18 l/min
Original equipment- Contact tube for 1.2-mm steel wire,- 16.0-mm dia. conical nozzle,- wear conduit for 1.0 to 1.2-mm steel wire.
Main wear parts:� Wear parts compatible with the most common
standard in Europe.
2004
-630
2004
-628
Cat. N° Description
W 000 010 730 Wear conduit, steel spirals 0.6-0.8 3M
W 000 010 731 Wear conduit, steel spirals 0.6-0.8 4M
W 000 010 732 Wear conduit, steel spirals 0.6-0.8 5M
W 000 010 733 Wear conduit, steel spirals 1.0-1.2 3M
W 000 010 734 Wear conduit, steel spirals 1.0-1.2 4M
W 000 010 735 Wear conduit, steel spirals 1.0-1.2 5M
W 000 010 867 Wear conduit, steel spirals 1.6 3M
W 000 010 868 Wear conduit, steel spirals 1.6 4M
W 000 010 869 Wear conduit, steel spirals 1.6 5M
W 000 010 736 Wear conduit, Teflon 1.0-1.2 3M
W 000 010 737 Wear conduit, Teflon 1.0-1.2 4M
W 000 010 738 Wear conduit, Teflon 1.0-1.2 5M
W 000 010 745 Wear conduit, Teflon 1.6 3M
W 000 010 746 Wear conduit, Teflon 1.6 4M
W 000 010 747 Wear conduit, Teflon 1.6 5M
Cat. N° Description
W 000 010 722Contact tube supportM8x28
Cat. N° DescriptionW000010834 Contact tube M8x30 0.8 CuW000010835 Contact tube M8x30 1.0 CuW000010836 Contact tube M8x30 1.2 CuW000010837 Contact tube M8x30 1.6 CuW000010840 Contact tube M8x30 0.8 CuCrZrW000010841 Contact tube M8x30 1.0 CuCrZrW000010842 Contact tube M8x30 1.2 CuCrZrW000010843 Contact tube M8x30 1.6 CuCrZrW000010853 Contact tube M8x30 1.0 Al wireW000010854 Contact tube M8x30 1.2 Al wireW000010855 Contact tube M8x30 1.6 Al wire
Cat. N° DescriptionW 000 010 780 Insulating diffuser WMT 36AW 000 010 781 High-temperature insulating diffuser WMT 36AW 000 010 782 Ceramic insulating diffuser WMT 36A
Cat. N° Description
W 000 010 794Conical nozzle16.0 dia. WMT 36A
W 000 010 795Conical nozzle14.0 dia. WMT 36A
W 000 010 796Cylindrical nozzle20 dia. WMT 36A
2-4
2M
IG/M
AG
WE
LDIN
G
EN 60974-7
2007-141
MIG/MAG welding torchesWMT 500W
0807
-59
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Applications:Pressure vessels, structural steel work, heavy duty applications, etc.
Advantages for clients:� Easy manoeuvrability � European standard
(ball joint articulation) connections
Ordering information: WMT 500W 3m: Cat. N° W 000 010 608
WMT 500W 4m: Cat. N° W 000 010 609
WMT 500W 5m: Cat. N° W 000 010 610
Technical specifications:Cooling: Water100% duty cycle:
- 500 A with C1 (EN 439): CO2,- 450 A with M21 (EN 439): Ar + CO2
Voltage class: L-113 V
Usable wires:- 0.8 to 2.4-mm diameter steel wire- 1.0 to 2.4-mm diameter aluminium wire
Gas flow rate: 10 to 25 l/min
Original equipment:- Contact tube for 1.2-mm steel wire,- 16.5-mm conical nozzle,- wear conduit for 1.0 to 1.2-mm steel wire.
Main wear parts:� Wear parts compatible with the most common
standard in Europe.
2004
-630
2004
-628
Cat. N° DescriptionW 000 010 730 WC* steel spirals 0.6-0.8 3MW 000 010 731 WC* steel spirals 0.6-0.8 4MW 000 010 732 WC* steel spirals 0.6-0.8 5MW 000 010 733 WC* steel spirals 1.0-1.2 3MW 000 010 734 WC* steel spirals 1.0-1.2 4MW 000 010 735 WC* steel spirals 1.0-1.2 5MW 000 010 739 WC* steel spirals 1.6 3M WMT waterW 000 010 740 WC* steel spirals 1.6 4M WMT waterW 000 010 741 WC* steel spirals 1.6 5M WMT waterW 000 010 742 WC* steel spirals 2.0-2.4 3M WMT waterW 000 010 743 WC* steel spirals 2.0-2.4 4M WMT waterW 000 010 744 WC* steel spirals 2.0-2.4 5M WMT waterW 000 010 736 WC* Teflon 1.0-1.2 3MW 000 010 737 WC* Teflon 1.0-1.2 4MW 000 010 738 WC* Teflon 1.0-1.2 5MW 000 010 745 WC* Teflon 1.6 3MW 000 010 746 WC* Teflon 1.6 4MW 000 010 747 WC* Teflon 1.6 5MW 000 010 817 WC* Teflon 2.0-2.4 3MW 000 010 818 WC* Teflon 2.0-2.4 4MW 000 010 819 WC* Teflon 2.0-2.4 5M*WC: Wear Conduit
Cat. N° DescriptionW 000 010 748 Insulating washer
Cat. N° Description
W 000 010 797Conical nozzle16.5 dia. WMT 500W
W 000 010 798Conical nozzle14.5 dia. WMT 500W
W 000 010 799Cylindrical nozzle20.0 dia. WMT 500W
Cat. N° DescriptionW 000 010 834 CT* M8x30 0.8 CuW 000 010 835 CT* M8x30 1.0 CuW 000 010 836 CT* M8x30 1.2 CuW 000 010 837 CT* M8x30 1.6 CuW 000 010 838 CT* M8x30 2.0 CuW 000 010 839 CT* M8x30 2.4 CuW 000 010 840 CT* M8x30 0;8 CuCrZrW 000 010 841 CT* M8x30 1.0 CuCrZrW 000 010 842 CT* M8x30 1.2 CuCrZr
Cat. N° DescriptionW 000 010 843 CT* M8x30 1.6 CuCrZrW 000 010 844 CT* M8x30 2.0 CuCrZrW 000 010 845 CT* M8x30 2.4 CuCrZrW 000 010 853 CT* M8x30 1.0 Al wireW 000 010 854 CT* M8x30 1.2 Al wireW 000 010 855 CT* M8x30 1.6 Al wireW 000 010 856 CT* M8x30 2.0 Al wireW 000 010 857 CT* M8x30 2.4 Al wire
*CT: Contact Tube
Cat. N° DescriptionW 000 010 783 Insulating diffuseur WMT 500WW 000 010 784 High-temperature insulating diffuser WMT 500WW 000 010 785 Ceramic insulating diffuser WMT 500W
Cat. N° DescriptionW 000 010 724 CT* support M8x25
2-5
EN 60974-7
Useful to:- Cut the wire - Clean the nozzles- Unscrew the tips- Unscrew the nozzles
MIG pliers (original FIX®)
Simple stand with magnetic base to keep your work place clean.
• Designed to measure gas flow atthe front of MIG/MAG torch
• Maximum flowrate: 20 l/min(Ar, CO2 or mixed gas)
• Accuracy +- 10%
• Unbreakable
MIG torch stand
Cat N°: W 000 010 802
1415
-26
2004
-979
FLOWELD
Cat N°: W 000 335 159
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Accessories
2-6
Nozzle Ø 12-15 mmCat N°: W 000 010 453
Nozzle Ø 15-18 mmCat N°: W 000 010 454
2M
IG/M
AG
WE
LDIN
G
2008
-548
Anti-spatters
• Water based and odourless• No influence on porosity and
cold cracks• No influence of the content of
diffusible hydrogen in the weldmetal
• Solvent and silicone free• Biodegradable• Allows parts to be lacquered• Easily washed off parts
SPRAYMIG H2OAnti-spatter spray and liquid
Cat N°: W 000 010 001
Cat N°: W 000 011 074
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Description:• SPRAYMIG H2O silicone-free water-based anti-spatter
based on highly efficient water soluble substances.• It prevents spatter from sticking to nozzles, tips,
and work pieces robots and extends nozzle lifeconsiderably.
• It permits rapid changing and cleaning of the nozzles.• Painting, galvanizing, lacquering of parts is possible.• A preliminary test is recommended.• Very low consumption for a high effectiveness.
Physical and chemical properties • Aspect: liquid uncoloured clear.• Density at 20 °C: 1.00.• Pure pH: 7.• Volume: - spray: 400 ml (net) - 520 ml (nominal),
- drum: 20 liters.• Propellant gas: dimethylether.• Base: water - based emulsion of organic
substances.
Spray (400 ml)
Drum (20 liters)
Cat N°: W 000 011 093
Cat N°: W 000 011 071
F+
Extremelyflammable
• Silicone based • Not for use on any parts that are to be painted• Use on cold parts• Use on nozzles only and outside contact tip
SPRAYMIG SIBAnti-spatter spray
• Protects nozzles and contacttips from spatter by immersion.
• Silicone and solvent free.
• Odourless.
NETMIGAnti-spatter dip
Technical data:• SPRAYMIG SIB is a preventive maintenance product
for MIG/MAG torches. • To be used on cold parts only, do not use on threads
or inside contact tips (as the product is electricallyinsulating).
• Volume: 400 ml (net) - 520 ml (nominal).• Propellant gas: tetrafluorethan (non flammable).• Base: silicone and isoparaffinic solvent.
Cat N°: W 000 011 092
• Silicone free• Compatible with paint• Use on cold parts• Use on nozzles only and
outside contact tip
SPRAYMIG SVBAnti-spatter spray
Technical data:• SPRAYMIG SVB is an anti-spatter silicone free
spray for welding applications.• Volume: 300 ml (net) - 520 ml (nominal).• Propellant gas: CO2 (non-flammable).• Base: paraffinic oil, anti-spatters past based on
wax and oil. Isoparaffinic solvent.
Technical data:• Prevents spatter adhering to:
- To torch nozzles and contact tips,- To positioners and jaws of welding lathes.
• Does not clog threads or apertures. • Does not cause porosity. Silicone and solvent free. Odourless.• Base: waxes and oil.• Volume: 220 ml (net) - 225 ml (nominal)
2-7
2007
-394
2007
-394
2007
-394
2007
-399
CAUTION: before use,
carefully read and understand
the safety datasheet
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
MIG consumablesStainless steel MIG wiresBS 300* spools
AWS A5.9 Description Diam. Packaging Cat N°(mm)
0.8 15 kg - BS 300 W 000 283 672
ER 308 L Si WL wire 308 L Si 1.0 15 kg - BS 300 W 000 283 144
1.2 15 kg - BS 300 W 000 283 146
0.8 15 kg - BS 300 W 000 283 674
ER 309 L Si WL wire 309 LSi 1.0 15 kg - BS 300 W 000 283 148
1.2 15 kg - BS 300 W 000 283 150
0.8 15 kg - BS 300 W 000 283 676ER 316 L Si WL wire 316 LSi
1.0 15 kg - BS 300 W 000 283 152
1.2 15 kg - BS 300 W 000 283 154
Aluminium MIG wiresBS 300* spools
* BS 300: metallic spool with hub
AWS A5.9 Description Diam. Packaging Cat N°(mm)
1.0 W 000 283 683
ER 4043 WL wire ALSi5 1.2 7 kg - BS 300 W 000 283 684
1.6 W 000 283 685
1.0 W 000 283 686
ER 5183 WL wire ALMG4.5MN 1.2 7 kg - BS 300 W 000 283 687
1.6 W 000 283 688
1.0 W 000 283 689
ER 5356 WL wire ALMG5 1.2 7 kg - BS 300 W 000 283 690
1.6 W 000 283 691
WELDLINE offers the mostpopular stainless steel andaluminium welding grades forMIG welding, within the tightconstraints of the AWSstandards.
These competitive-priced wiresare supplied without agencyapprovals.
All wire grades can be suppliedwith a 3.1 chemical analysiscertificate according toEN10204.
MIG wires are precision layerwound for trouble freefeedability
2-8
2M
IG/M
AG
WE
LDIN
G
3 - TIG welding
PROFESSIONAL WELDING PRODUCTS BYWELDLINE is an Air Liquide Welding trademark
• TIG torches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 to 3.4
• Tungsten electrodes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 to 3-6
• TIG consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
• Miscellaneous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
For: clamps, connectors, cables,hammers, miscellaneous, ceramic backings,see chapter “Other arc welding”
3T
IGW
ELD
ING
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
TIG torches
3-1
Simplify your lifeTIG torches must be reliable, flexible and use
common wear parts. Connection and handles haveto be adapted to the different habits.
• HANDLEThe different type of handle
• CONNECTIONS
• LENGTHHarness length is 4 or 8 m(except V only 4 m)
Air cooled
Connector: Ø 13 mm Connector: Ø 13 mm
Connector: Ø 13 mmConnector: Ø 13 mm
Connector: Ø 9 mm
Water cooled
Air cooled Water cooled
2008
-259
2008
-255
2008
-260
2008
-273
2008
-271
EB
RL
V
C5B
S
V
2008
-268
2008
-256
2008
-257
2008
-277
EN 60974-7
TIG torches
3-2
3T
IGW
ELD
ING
Air cooled: 3 torches using electrode 1.0 to 3.2 mm
Air cooledHandle
connectionTorch 4 m 8 m
WTT 9 RL S W 000 306 115 W 000 306 116RL/S WTT 17 RL S W 000 306 117 W 000 306 118
WTT 26 RL S W 000 306 119 W 000 306 120
WTT 9 RL C5B W 000 306 125 W 000 306 126RL/C5B WTT 17 RL C5B W 000 306 127 W 000 306 128
WTT 26 RL C5B W 000 306 129 W 000 306 130
WTT 9 EB S W 000 266 572 W 000 266 571
EB/S WTT 17 EB S W 000 266 570 W 000 266 569
WTT 26 EB S W 000 266 568 W 000 266 567
WTT 9 EB C5B W 000 306 105 W 000 306 106
EB/C5B WTT 17 EB C5B W 000 306 107 W 000 306 108
WTT 26 EB C5B W 000 306 109 W 000 306 110
WTT 9V W 000 266 434 -
V/V WTT 17V W 000 266 574 -
WTT 26V W 000 266 573 -
The WTT range
To order
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
WTT 9 or 9 VWelding current: 125 A at 35% - 80 A at 60%
Fitted with: - cap medium- nozzle Ø 1.0 mm- electrode Ø 1.6 mm
2008
-255
2008
-257
2008
-259
2008
-261
2008
-263
2008
-264
2008
-265
2008
-267
2008
-269
WTT 17 or 17 VWelding current: 150 A at 35% - 100 A at 60%
Fitted with: - cap medium- nozzle Ø 1.0 mm- electrode Ø 2.0 mm
WTT 26 or 26 VWelding current: 200 A at 35% - 130 A at 60%
Fitted with: - cap medium- nozzle Ø 1.2 mm- electrode Ø 2.4 mm
EN 60974-7
TIG torches
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY3-3
Water cooled: 2 torches using tungsten electrode 1.0 to 4.0 mm
Handleconnection
Torch 4 m 8 m
RL/SWTT 20W RL S W 000 306 121 W 000 306 122
WTT 18W RL S W 000 306 123 W 000 306 124
RL/C5BWTT 20W RL C5B W 000 306 131 W 000 306 132
WTT 18W RL C5B W 000 306 133 W 000 306 134
EB/SWTT 20W EB S W 000 266 566 W 000 266 565
WTT 18W EB S W 000 266 564 W 000 266 563
EB/C5BWTT 20W EB C5B W 000 306 111 W 000 306 112
WTT 18W EB C5B W 000 306 113 W 000 306 114
Water cooled
To order
2008
-270
2008
-272
2008
-274
2008
-275
WTT 20 WWelding current: 250 A at 60%
Fitted with: - cap medium- nozzle Ø 1.2 mm- electrode Ø 2.4 mm
WTT 18 WWelding current: 350 A at 60%
Fitted with: - cap medium- nozzle Ø 1.2 mm- electrode Ø 2.4 mm
EN 60974-7
TIG torches wear parts
3T
IGW
ELD
ING
3-4Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
01-1
02
03
04-2
04-1
05
06-2
06-1
07
08
09-2
L
L
09-1
01-2
01-3
Tungstenelectrode
Ø REPWTT 9 / 9 VWTT 20 W
WTT 17 / 17 VWTT 26 / 26 V
WTT 18 W
Back cap
Short 01-1 W 000 306 398 W 000 306 399
Medium 01 W 000 306 400 -
Long 01-2 W 000 306 402 W 000 306 403
Back cap O-ring 02 W 000 306 404 W 000 306 405
Collet
1,0
03
W 000 306 406 W 000 306 411
1,6 W 000 306 407 W 000 306 412
2,0 W 000 306 408 W 000 306 413
2,4 W 000 306 409 W 000 306 414
3,2 W 000 306 410 W 000 306 415
4,0 - W 000 306 416
Insulating ring 04-1 W 000 270 780 W 000 306 395
Sealing ring 04-2 W 000 306 396 W 000 306 397
Collet body
1,0
05
W 000 306 376 W 000 306 380
1,6 W 000 306 377 W 000 306 381
2,0 W 000 306 378 W 000 270 781
2,4 W 000 306 455 W 000 306 382
3,2 W 000 306 379 W 000 306 383
4,0 - W 000 306 384
Short nozzle
6,4
06-1
W 000 306 417 W 000 306 423
8,0 W 000 306 418 W 000 306 424
9,6 W 000 306 419 W 000 306 425
11,2 W 000 306 420 W 000 306 426
12,8 W 000 306 421 W 000 306 427
16,0 W 000 306 422 W 000 306 428
19,2 - W 000 306 461
Long nozzle
4,8
06-2
W 000 306 456 -
6,4 W 000 306 457 W 000 306 462
8,0 W 000 306 458 W 000 306 463
9,6 W 000 306 459 W 000 306 464
11,2 - W 000 306 465
Gas L. sealing ring 07 - W 000 306 466
G.L. collet body
1,0
08
W 000 306 385 W 000 306 389
1,6 W 000 306 386 W 000 306 390
2,0 W 000 306 460 -
2,4 W 000 306 387 W 000 306 391
3,2 W 000 306 388 W 000 306 392
4,0 - W 000 306 393
Gas L. nozzle
6,4
09-1
W 000 306 429 W 000 306 434
8,0 - W 000 306 435
9,6 W 000 306 431 W 000 306 436
11,2 W 000 306 432 W 000 306 437
12,8 W 000 306 433 W 000 306 438
16,0 - W 000 306 439
Long G.L. nozzle
8,0
09-2
- W 000 306 467
9,6 - W 000 306 468
11,2 - W 000 306 469
12,8 - W 000 306 470
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Tungsten electrodes
3-5
Choice criteria
A complete range of tungsten electrodes:� Pure tungsten,� Tungsten + thorium,� Tungsten + cerium,� Tungsten + lanthanum.� Tungsten + rare earths.
Arc striking, arc stability and life durationare the main criteria hen choosing atungsten electrode. To obtain thesequalities, oxidises are added to thethorium. Traditionally it was thorium oxide.
It is however know that under someconditions (for example sharpening) thethorium dust contains radioactiveelements. Even thought the radioactiveelement is very low and well belowconsidered dangerous levels. Producershave and are constantly trying to replacethis thorium by other oxides that containno radioactive elements.
Lanthanum is the best electrodeconsidering the following arguments:
• Possibility of use with alternativeor continuous current,
• Better striking than all the othertypes of tungsten electrodes,
• Better arc stability due to thelower deformation of theelectrodes tip,
• Better life duration,
• No radioactivity at all.
The lanthanum electrodes (2%):The non consumable electrode that has no radioactiveelements and excellent performance.
Thorium is radioactive and may present hazardous by external and internal exposure. If alternativesare technically feasible, they should be used.
Rare earths = any of the abundant metallic elements, including scandium (atomic number 21), yttrium(39), and the 15 elements from 57 to 71 (lanthanide series include lanthanum and cerium) in the Mendeleyevclassification.
TypeMetal
Arc stability Striking LastingThermal
resistanceLight Alloys Steel &Stainless steel
WPPure tungsten * ** * * *WT 20Thorium 2% * * *** ** **WC 20Cerium 2% * ** * ** **WL 20Lanthanum 2% * * ** *** *** ***WS 20Rare earth 2% * * ** *** *** ***
Please note: special regulations regarding thorium in Switzerland. *** Excellent - ** Good - * Average
Radiationfree
3-6
3T
IGW
ELD
ING
Tungsten electrodes
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
WP - Pure tungsten - Light alloy (green tip)
WL 20 - Lanthanum 2%Light alloy (using AC current), steel and stainless steel (using DC current) (blue tip).
2006-528
Ø mm150 mm length 175 mm length
Cat N°1.0 W 000 010 009 -1.6 W 000 010 010 W 000 010 3752.0 W 000 010 011 W 000 010 3762.4 W 000 010 012 W 000 010 3773.0 W 000 010 013 -3.2 W 000 010 014 W 000 010 3784.0 W 000 010 015 W 000 335 152
Ø mm150 mm length 175 mm length
Cat N°1.0 W 000 010 022 -1.6 W 000 010 023 W 000 335 1532.0 W 000 010 024 W 000 010 3812.4 W 000 010 025 W 000 335 1543.0 W 000 010 026 -3.2 W 000 335 150 W 000 335 1574.0 W 000 010 028 W 000 335 155
Ø mm75 mm length 150 mm length 175 mm length
Cat N°1.0 W 000 011 144 W 000 010 373 -1.6 W 000 011 145 W 000 010 016 W 000 010 3852.0 - W 000 010 017 W 000 010 3862.4 W 000 011 146 W 000 010 018 W 000 010 3873.0 - W 000 010 019 -3.2 - W 000 010 020 W 000 010 3884.0 - W 000 010 021 W 000 010 389
WL 20 – Rare earth 2% - Light alloy(using AC current), steel and stainless steel (using DC current) turquoise tip.
Ø mm175 mm length
Cat N°1.0 W 000 335 1661.6 W 000 335 1672.0 W 000 335 1682.4 W 000 335 1693.0 W 000 335 1703.2 W 000 335 1714.0 W 000 335 172
WT 20 - Thorium 2% - Steel and stainless steel (red tip)
Ø mm150 mm length 175 mm length
Cat N°1.0 W 000 010 002 W 000 335 1511.6 W 000 010 003 W 000 010 0302.0 W 000 010 004 W 000 010 3902.4 W 000 010 005 W 000 010 0313.0 W 000 010 006 -3.2 W 000 335 156 W 000 010 0324.0 W 000 010 008 W 000 010 374
Electrodediameter
mm
Direct current, AAlternating current, A
Electrode negative (–) Electrode positive (+)
Pure tungstenTungsten withoxide additives
Pure tungstenTungsten withoxide additives
Pure tungstenTungsten withoxide additives
1.0 10 to 75 10 to 75 No indication No indication 15 to 55 15 to 701.6 40 to 130 60 to 150 10 to 20 10 to 20 45 to 90 60 to 1252.0 75 to 180 100 to 200 15 to 25 15 to 25 65 to 125 85 to 1602.4 120 to 220 150 to 250 15 to 30 15 to 30 80 to 140 120 to 2103.0 150 to 300 210 to 310 20 to 35 20 to 35 140 to 180 140 to 2303.2 160 to 310 225 to 330 20 to 35 20 to 35 150 to 190 150 to 2504.0 275 to 450 350 to 480 35 to 50 35 to 50 180 to 260 240 to 350
Recommended amperage
WC 20 - Cerium 2%Steel and stainless steel (grey tip)
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
TIG consumables
3-7
WELDLINE offers the most popular stainlesssteel and aluminium welding grades for TIGwelding, within the tight constraints of theAWS standards.
These competitive priced rods are suppliedwithout agency approvals.
All wire grades can be supplied with a 3.1chemical analysis certificate according toEN10204.
TIG wires are stamped at both the ends ofthe wire rod for optimum traceability.
Stainless steel TIG rods
Aluminium TIG rods
AWS A5.9 Description Diam. (mm) Packaging Cat N°
ER 316 L WL rod 316 L
1.2
1 000 mm long - 5 kg
W 000 274 5031.6 W 000 283 6062.0 W 000 283 6072.4 W 000 283 608
ER 308 L WL rod 308 L
1.2
1 000 mm long - 5 kg
W 000 274 5041.6 W 000 283 6092.0 W 000 283 6102.4 W 000 283 611
AWS A5.9 Description Diam. (mm) Packaging Cat N°
ER 4043 WL rod ALSI5
2.0
1 000 mm long - 5 kg
W 000 283 6922.4 W 000 283 6933.2 W 000 283 694
ER 5183 WL rod ALMG4.5MN
2.0
1 000 mm long - 5 kg
W 000 283 6952.4 W 000 283 6963.2 W 000 283 697
ER 5356 WL rod ALMG5
1.6
1 000 mm long - 5 kg
W 000 274 5052.0 W 000 283 6982.4 W 000 283 6993.2 W 000 283 700
Miscellaneous
3-8
3T
IGW
ELD
ING
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Cat N°: W 000 011 035
Cat N°: W 000 011 101
TIG POINTChemical sharpening of tungsten electrodes
Instructions for use:• Make the electrode to be out from the
torch of 15 mm. • Use the welding current to warm the
electrode to white.• Dip the electrode in the product while
rotating the electrode.• Make sure that the result is satisfactory.• Carefully close the pot.
2002
-002
2006
-528
Portable electric toolfor tungsten electrodessharpening
Characteristics:• All you need to sharpen your tungsten electrodes (all ranges)
delivered in a practical metal case:- Sharpening machine- Clamp to lock the machine on a bench- Standard blue head for the electrodes diameter 1.6 / 2.0 / 2.4 / 3.2 mm- Nozzle connectable on a vacuum cleaner for extraction of
tungsten dusts- Electrode holder to clamp TIG electrodes- Tools to assemble and dismantle
• For an accurate sharpening:- Choose the electrode diameter- Select the grinding angle (10° to 70°)- Start the machine- Insert the electrode and turn it slowly
• An incredible result:- The grind is perfect- The grinding angle is very precise- Longitudinal sharpening, precise and symmetric angle
Technical characteristics:Voltage: 220-230 volts
Frequency: 50 - 60 Hz
Power: 400 W
Amperage: 1.8 A
Disk speed: 30.000 rpm
Weight: 1.85 kg
Warranty: 2 years.Conform to EU standards
Other products of the range:
• Red head: (for tungstenelectrodes Ø 1.0 / 4.0/ 4.8 / 6.0 mm)
• Spare blue head:(for tungsten electrodesØ 1.6 / 2.0 / 2.4 / 3.2 mm)
• Spare diamond disk:
Cat N°: W 000 011 037
Cat N°: W 000 011 038
Cat N°: W 000 011 036
Simple stand with magnetic base to keepyour work place clean.
TIG torch stand
Cat N°: W 000 010 803
2004
-982
TIG SHARP
EN 50144-2-3
EN 60745-1
EN 60745-1/A1
4 - Other arc welding
PROFESSIONAL WELDING PRODUCTS BYWELDLINE is an Air Liquide Welding trademark
• Cables and connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 to 4-2
• Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 to 4-4
• Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 to 4-6
• Ceramic backings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 to 4-10
4O
TH
ER
AR
CW
ELD
ING
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Cables and connectorsThe different types of cable� Primary cables:
Three core for single phaseor four core for three phaserequirement.
Current indication is the maximum accepted toconform to the 287 IEC recommendation.
� Secondary cables:
A single copper core between the power sourceand the clamp as well as between the power sourceand the electrode holder. The current indication isthe maximum accepted to conform to the 287 IECrecommendation.
For length over 10 meters, the section has to beincreased.
For secondary cable, the European directive(2006/95/EC-low voltage directive) imposes theconformity to one of these two standards. It meansthat for safety reason (resistance to welding hotprojections ), PVC cables must not be used aswelding cables, as they do not meet the standards'requirements.
Standard:H07RN-F Standard:
H01N2-Eextra flexible
Standard:H01N2-Dflexible
Reference documents:- H07RN-F standard for primary cables
- H01N2-E and H01N2-D standards for secondary cables
- Harmonized standard CENELEC HD 516 S2: 1997 / HD 22.6
- § 4.4.5 Document change through amendment A1: 2003
- Communication in the framework (01/02/2005) of the lowvoltage directive
4-1
2000
-174
x
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Cables and connectorsPrimary cablesH07RN-F
Cat N°Linear meter
3 x 1.5 mm2 23 A W 000 010 098
3 x 2.5 mm2 32 A W 000 010 099
4 x 2.5 mm2 29 A W 000 010 100
4 x 4 mm2 38 A W 000 010 101
4 x 6 mm2 50 A W 000 010 102
4 x 10 mm2 68 A W 000 010 103
4 x 16 mm2 92 A W 000 010 104
4 x 25 mm2 122 A W 000 010 105
4 x 35 mm2 150 A W 000 010 106
Ø mm2
Cat N°Linear meter
16 mm2 130 A W 000 010 137
25 mm2 172 A W 000 010 138
35 mm2 216 A W 000 010 139
50 mm2 273 A W 000 010 140
70 mm2 340 A W 000 010 141
95 mm2 412 A W 000 010 142
120 mm2 480 A W 000 010 143
Ø mm2
Secondary cablesH01N2-E (extra flexible) H01N2-D (flexible)
Cat N°Coil (50 m) Linear meter
16 mm2 130 A W 000 260 274 W 000 260 272
25 mm2 172 A W 000 260 275 W 000 260 273
35 mm2 216 A W 000 260 276 W 000 260 271
50 mm2 273 A W 000 260 277 W 000 260 270
70 mm2 340 A W 000 260 278 W 000 260 269
95 mm2 412 A W 000 260 279 W 000 260 268
Ø mm2
Cable lugsScrew typeDiameter : 11 mmCable : 0-25 mm2
Cat N° : W 000 010 094
Screw typeDiameter : 14 mmCable : 25-35 mm2
Cat N° : W 000 010 095
Screw typeDiameter : 14 mmCable : 35-50 mm2
Cat N° : W 000 010 096Diameter : 16 mmCable : 70-100 mm2
Cat N° : W 000 335 165
Screw typeDiameter : 16 mmCable : 50-70 mm2
Cat N° : W 000 010 640
2007-7532007-752
2007-755
2007-754
CableconnectorsDINSE typePush and twist design
Description Cat N°
10-25 mm2 200 A W 000 010 559
male 35-50 mm2 400 A W 000 010 560
70-95 mm2 600 A W 000 010 561
10-25 mm2 200 A W 000 010 562
female 35-50 mm2 400 A W 000 010 563
70-95 mm2 600 A W 000 010 564
Ø mm2
2007-814
4-2
4O
TH
ER
AR
CW
ELD
ING
EN 60974-12
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
ClampsThe choice of a clamp followsseveral criteria� It firstly depends upon the maximum amperage you are using.
� Then, the kind of contact is important. For light duty or normaluse, steel clamps HIPPO type, or brass clamps CROCODILEtype are perfect. For heavy duty or intensive use, you canchoose from MUSCLOR, DRAGON or SERRE-JOINT types.
� Lastly the MAGNETIC type been ideal for large componentparts and the ROTARY for heavy use where the cable turnsaround the clamp.
Clamps for normal use
4-3
Choice criteria Maximumamperage (A)
Jaw opening(mm)
HIPPO 200 200 38
HIPPO 400 400 50
HIPPO 600 600 50
CROCODILE 300 300 38
CROCODILE 600 600 38
2004
-634
2007
-756
Name Cat N°A
(35%)Ø cable(mm2)
Weight(g)
Customer’s benefit
HIPPO 200 W 000 010 579 200 25 208
Economical steel clamps.HIPPO 400 W 000 010 580 400 70 362
HIPPO 600 W 000 010 597 600 70 376
CROCODILE 300 W 000 010 577 300 50 405 Brass clamps. Brass jaws.
CROCODILE 600 W 000 010 578 600 95 634 Very good contact surface.
Choice criteria Maximumamperage (A)
Jaw opening(mm)
MAGNETIC 500 500 N/A
MAGNETIC 600 600 N/A
ROTARY 800 800 82
Choice criteria Maximumamperage (A)
Jaw opening(mm)
MUSCLOR 300 300 38
MUSCLOR 600 500 38
SERRE-JOINT 500 500 60
SERRE-JOINT 900 800 75
DRAGON 600 600 38
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
ClampsClamps for bulky parts
2004
-541
Clamps for heavy duty use
2004
-638
2004
-640
2005
-931
4-4
4O
TH
ER
AR
CW
ELD
ING
Name Cat N°A
(35%)Ø cable(mm2)
Weight(g)
Customer’s benefit
MAGNETIC 500 W 000 010 553 500 70 815 Large surface contact.Can be placed close to thewelding position insuring good electrical contact. MAGNETIC 600 W 000 010 554 600 95 1722
ROTARY 800 W 000 010 555 800 2 x 95 3319 Brass clamps. Brass jaws.
Name Cat N°A
(35%)Ø cable(mm2)
Weight(g)
Customer’s benefit
MUSCLOR 300 W 000 010 583 300 50 480 Heavy duty brass clamps, powerfuljaws giving excellent grip.MUSCLOR 600 W 000 010 584 500 95 762
SERRE-JOINT 500 W 000 010 987 500 95 744Cable fixed with brass sleeve.Improved grip through clamp tightening capacity.
SERRE-JOINT 900 W 000 010 988 800 95 1187Cable fixed with brass sleeve. Improved gripthrough clamp tightening capacity. 3 positions of brass guide.
DRAGON 600 W 000 010 582 600 95 816Brass jaws, rubber sheath cable protection.Screw tightening giving excellent grip.
2004
-644
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
MiscellaneousChipping hammers
Steel head, wooden handle
• Weight: 660 g• Length: 315 mm
• Weight: 230 g• Length: 255 mm
• Weight: 290 g• Length: 265 mm
• Weight: 240 g• Length: 260 mm
• Weight: 410 g• Length: 300 mm
The choice of a hammer depends on the kind of steel you are working with(black or stainless steel) and some design, like wooden handle or not.
Cat N°: W 000 010 801
Stainless steel hammer,red rubber grip
Cat N°: W 000 010 556
Steel head, red rubber grip
Cat N°: W 000 010 800
Steel hammer G type,tubular handle
Cat N°: W 000 010 646
2004-632
2004-6102005-271
2004-609
Wire brushes4 rows brasscoated steel wires
4 rows stainless steel wires
This brush is speciallydesigned for cleaningaluminium parts beforeTIG or MIG welding.
4 rowssteel wires
2 rows stainlesssteel wires
Cat N°:W 000 010 162
Cat N°:W 000 010 163
Cat N°:W 000 010 164
Cat N°:W 000 010 165
Cat N°:W 000 010 166
0951
-13
0951
-04
1415
-51
0951
-12
0951
-11
Rivet wire brush
Carbon steelCat N°: W 000 335 161Stainless steelCat N°: W 000 335 160
2007
-815
Stainless steel English type,spring handle
Cat N°: W 000 335 1642007-793
Special brush for aluminium
4-5
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Miscellaneous
• Easy to use surface indicator• ±1% accuracy
MAGLITE®
Blister packedWarranty: 10 years
Name AAA AA 2D 3D 4D
Colour Black Black Black Black Black
Composition Torch, Torch,
pen style, black nylon Torch Torch Torch2 batteries LR3 case,
2 batteries LR6
Weight 49 g 106 g 421 g 506 g 562 g
Diameter 13 mm 18 mm - - -
Length 127 mm 145 mm 254 mm 307 mm 369 mm
Battery (type) 2 LR3 2 LR6 2 LR20 3 LR20 4 LR20
Cat N° W 000 211 966 W 000 211 967 W 000 211 968 W 000 211 969 W 000 211 970
Pack range Spare parts forMAGLITE® charger
Designation Cat N°
Bulbs W 000 211 654
Battery W 000 211 980
Sparebulbs
Designation Cat N°
AAA W 000 211 653
AA W 000 211 972
2D W 000 211 973
3D W 000 211 974
4D W 000 211 975
Designation Cat N°
Solitaire W 000 211 978
AAA W 000 211 977
AA W 000 211 976
• Nickel-cadmiumbattery (chargerincluded)
• Rechargeableup to 1000 times:the mostpowerful torch
MAG Charger
Cat N°:W 000 211 929
0951
-16
0951
-03
0951
-14
0951
-02
0951
-01
Welding gauge• Mesures precisely the thickness of the welding beads, flat as well
as angles of 90°.• Capacity of 20 mm with double vernier of 1/10 mm.• 4 bevel control angles:
90° - 80° - 70° - 60°.• Delivered in a leather case.
Cat N°: W 000 011 041
1266
-57
Temperature control stick
Designation Per packand temperature of 12 pieces
100 (101 °C - 213 °F) W 000 010 156
120 (121 °C - 250 °F) W 000 011 042
150 (149 °C - 300 °F) W 000 010 157
177 (177 °C - 350 °F) W 000 011 045
200 (198 °C - 388 °F) W 000 010 158
232 (232 °C - 450 °F) W 000 011 044
250 (253 °C - 488 °F) W 000 010 159
300 (302 °C - 575 °F) W 000 010 160
350 (343 °C - 650 °F) W 000 010 161
370 (371 °C - 700 °F) W 000 011 043
2005
-270
4-6
4O
TH
ER
AR
CW
ELD
ING
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Ceramic backingsKERALINE� General features
The ceramic backing blocks use a mix of naturalinorganic materials (talc, kaolin clay).The adhesive aluminium tape contains nohalogen elements and no chemical reactionshappen during the process.One-side welding ceramic backings are suitablefor different arc welding processes:
• SMAW,• GMAW:
- Solid wire,- Flux cored wire.
The technique of using the ceramic backings is easyto learn, even a welder that is not used to weld rootpasses day by day is able to perform a high qualityroot pass.
Excellent welding in semi automatic applications(trolley…).
� Economical aspectsWelding with KERALINE our new range ofceramic backings enables you to build a muchmore efficient weld root:
• without gouging,• without grinding,• without re-welding,• without rework,• with a wide root gap,• with a bigger root thickness permits higher
welding current for the hotpass.
The use of the ceramic backings enables welding withhigher intensity.The quality of the weld bead will be improved:
• higher penetration,• minimum risk of lack of fusion,• smooth profile of the root pass.
4-7
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Ceramic backings
Cat. n° Type Dimensions (mm) 3D diagram Application Packing
W 000 010 391 KERALINE TA1 - 6 mm 600 mm / piece10 pieces per bag (6 meters) 6 bags/carton (36 meters)
Cat. n° Type Dimensions (mm) 3D diagram Application Packing
W 000 010 392 KERALINE TA2 - 9 mm 600 mm / piece10 pieces per bag (6 meters) 6 bags/carton (36 meters)
Cat. n° Type Dimensions (mm) 3D diagram Application Packing
W 000 010 393 KERALINE TA3 - 13 mm 600 mm / piece10 pieces per bag (6 meters) 6 bags/carton (36 meters)
Cat. n° Type Dimensions (mm) 3D diagram Application Packing
W 000 010 394 KERALINE TF1 - 6 mm 600 mm / piece10 pieces per bag (6 meters) 6 bags/carton (36 meters)
Cat. n° Type Dimensions (mm) 3D diagram Application Packing
W 000 010 395 KERALINE TF2 - 9 mm 600 mm / piece10 pieces per bag (6 meters) 6 bags/carton (36 meters)
Cat. n° Type Dimensions (mm) 3D diagram Application Packing
W 000 010 396 KERALINE TF3 - 13 mm 600 mm / piece10 pieces per bag (6 meters) 6 bags/carton (36 meters)
4-8
Aluminium tape
Ø 6
Cat. n° Type Dimensions (mm) 3D diagram Application Packing
W 000 010 397 KERALINE TR1 - 6 mm 600 mm / piece50 pieces per bag (30 meters) 5 bags/carton (150 meters)
4O
TH
ER
AR
CW
ELD
ING
Suitable welding process
MMA TIG MIGMAG SAW
no yes yes no
Suitable welding process
MMA TIG MIGMAG SAW
no yes yes no
Suitable welding process
MMA TIG MIGMAG SAW
yes no yes no
Suitable welding process
MMA TIG MIGMAG SAW
no yes yes no
Suitable welding process
MMA TIG MIGMAG SAW
no yes yes no
Suitable welding process
MMA TIG MIGMAG SAW
yes no yes no
Suitable welding process
MMA TIG MIGMAG SAW
yes no yes no
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Ceramic backings
Ø 7
Cat. n° Type Dimensions (mm) 3D diagram Application Packing
W 000 010 398 KERALINE TR2 - 7 mm 600 mm / piece50 pieces per bag (30 meters) 5 bags/carton (150 meters)
Ø 8
Cat. n° Type Dimensions (mm) 3D diagram Application Packing
W 000 010 399 KERALINE TR3 - 8 mm 600 mm / piece20 pieces per bag (12 meters)8 bags/carton (96 meters)
Ø 9
Cat. n° Type Dimensions (mm) 3D diagram Application Packing
W 000 010 400 KERALINE TR4 - 9 mm 600 mm / piece20 pieces per bag (12 meters)7 bags/carton (84 meters)
Ø 12
Cat. n° Type Dimensions (mm) 3D diagram Application Packing
W 000 010 401 KERALINE TR5 - 12 mm 600 mm / piece20 pieces per bag (12 meters)5 bags/carton (60 meters)
Ø 15
Cat. n° Type Dimensions (mm) 3D diagram Application Packing
W 000 010 402 KERALINE TR6 - 15 mm 600 mm / piece15 pieces per bag (9 meters) 5 bags/carton (45 meters)
Cat. n° Type Dimensions (mm) 3D diagram Application Packing
W 000 010 403 KERALINE TM1 - 13 mm 600 mm / piece10 pieces per bag (6 meters) 7 bags/carton (42 meters)
Cat. n° Type Dimensions (mm) 3D diagram Application Packing
W 000 010 404 KERALINE TM2 - 18 mm 600 mm / piece9 pieces per bag (5.4 meters) 5 bags/carton (27 meters)
4-9
Aluminium tape
Metallic support
Suitable welding process
MMA TIG MIGMAG SAW
yes no yes no
Suitable welding process
MMA TIG MIGMAG SAW
yes no yes no
Suitable welding process
MMA TIG MIGMAG SAW
yes no yes no
Suitable welding process
MMA TIG MIGMAG SAW
yes no yes no
Suitable welding process
MMA TIG MIGMAG SAW
yes no yes no
Suitable welding process
MMA TIG MIGMAG SAW
yes yes yes yes
Suitable welding process
MMA TIG MIGMAG SAW
yes yes yes yes
5 - Liquids and sprays
PROFESSIONAL WELDING PRODUCTS BYWELDLINE is an Air Liquide Welding trademark
• Cooling liquid for torches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
• Leakage control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
• Anti-spatters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
• Anti-corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
• Sharpening of tungsten electrodes . . . . . . . . . . . . . . . . . . . 5-3
• Cracks detection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 to 5-5
• Stainless steel treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
5LI
QUI
DS, S
PRAY
SAN
D PA
STES
Leakage control
A high-return productfor leak detectionsuitable for all gasesexcept high pressureoxygen > 150 bars.
Cat N°: W 000 010 963 Cat N°: W 000 011 090
2007
-794
2000
-228
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
• Volume: 500 ml (net)650 ml (nominal)
• Propellant gas: denaturate hydrocarbure• Base: mixture of foam compounds• Temperature of application: –10 °C/+130 °C
Cooling liquid for torchesFREEZCOOL (RED)
BUBBLEA leakage controllersuitable for all gases.
1000 BULLES
General use:• Cooling of welding torches• Cooling of induction furnaces• Cooling of tack welding systems,
plasma flares• Air conditioning• Electric generators• Motorcar industry: engines cooling systems,
engines and gearboxes testing benches.• Cooling of radar systems.
Product benefits:• Ensures an anti-freezing protection down
to -27 °C• High electrical resistivity• Non volatile (no product losses)• Chemically stable, does not polymerize• Anti-corrosion: contains multi metallic
corrosion inhibitors.• Anti-algae growth• Non toxic• Non flammable
Controls:• Freezing point with a refract meter• pH control• Iron and copper contents
Physical properties:• Physical form: red liquid• Base: monopropylen glycol and water• Specific gravity: 1.04 at 20 °C• pH: 7+/-2• Freezing point: -27 °C• Resistivity: 105 ohm.cm-1
Packaging:FREEZCOOL is delivered in 10 or 20 kilosnet weight, polyethylene drums. For anyother type of packaging, please contact us.
Caution:Before use, carefully read and understandthe safety datasheet.
FREEZCOOL is a highly elaborated heat carrier. It is formulated with multi metal corrosion inhibitorsfor a safe use into all types of circuits. Its thermalstability and dielectric properties make a coolingliquid especially suitable for "high tech" systems.
Cat N°: W 000 010 167 (10 kg)
Cat N°: W 000 010 168 (20 kg) 2004
-216
5-1
• Volume: 400 ml (net)650 ml (nominal)
• Propellant gas: nitrogen protoxyde• Base: lauryether natrium sulfateF+
Extremelyflammable
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY 5-2
Anti-spatters
• Water based and odourless• No influence on porosity and
cold cracks• No influence of the content of
diffusible hydrogen in the weldmetal
• Solvent and silicone free• Biodegradable• Allows parts to be lacquered• Easily washed off parts
SPRAYMIG H2OAnti-spatter spray and liquid
• Silicone free• Compatible with paint• Use on cold parts• Use on nozzles only and
outside contact tip• Dichloromethane solvent.
SPRAYMIG SVDAnti-spatter spray
Cat N°: W 000 010 001
Cat N°: W 000 011 074
Description:• SPRAYMIG H2O silicone-free water-based anti-spatter
based on highly efficient water soluble substances.• It prevents spatter from sticking to nozzles, tips,
and work pieces robots and extends nozzle lifeconsiderably.
• It permits rapid changing and cleaning of the nozzles.• Painting, galvanizing, lacquering of parts is possible.• A preliminary test is recommended.• Very low consumption for a high effectiveness.
Physical and chemical properties • Aspect: liquid uncoloured clear.• Density at 20 °C: 1.00.• Pure pH: 7.• Volume: - spray: 400 ml (net) - 520 ml (nominal),
- drum: 20 liters.• Propellant gas: dimethylether.• Base: water based emulsion of synthetic oil.
Spray (400 ml)
Cat N°: W 000 271 574
Drum (20 liters)
Cat N°: W 000 011 093
F+
Extremelyflammable
F+
Extremelyflammable
• Silicone based • Not for use on any parts that are to be painted• Use on cold parts• Use on nozzles only and outside contact tip
SPRAYMIG SIBAnti-spatter spray Technical data:
• SPRAYMIG SIB is a preventive maintenance productfor MIG/MAG torches.
• To be used on cold parts only, do not use on threadsor inside contact tips (as the product is electricallyinsulating).
• Volume: 400 ml (net) - 520 ml (nominal).• Propellant gas: aliphatic hydrocarbons.• Base: silicone and isoparaffinic solvent.
Technical data:• SPRAYMIG SVD is an anti-spatter silicone free spray
for welding applications• Volume: 300 ml (net) – 520 ml (nominal)• Propellant gas: aliphatic hydrocarbons• Base: Synthetic oil not siliconic.• Dichloromethane solvent.
Cat N°: W 000 011 092
• Silicone free• Compatible with paint• Use on cold parts• Use on nozzles only and
outside contact tip
SPRAYMIG SVBAnti-spatter spray
Technical data:• SPRAYMIG SVB is an anti-spatter silicone free
spray for welding applications.• Volume: 400 ml (net) - 520 ml (nominal).• Propellant gas: aliphatic hydrocarbons.• Base: biodegradable synthetic polymers.
2007
-394
2007
-394
2009
-250
2007
-394
CAUTION: before use,
carefully read and understand
the safety datasheet
www.safety-welding.com
5LI
QUI
DS, S
PRAY
SAN
D PA
STES
Xi
Irritant
Anti-spatters
GALVASPRAY• Protection of welded joints
• Permits welded parts to be lacquered
Technical data:• GALVASPRAY sprays a zinc protective finish. • High resistance to oxidation and corrosion
(more than 80 hours in salty fog)• Quick drying (about 5 minutes) and no dripping.• Volume: 400 ml (net) - 520 ml (nominal).• Propellant gas: propane/butane.• Base: zinc powder in a vegetal resin.
Cat N°: W 000 011 094
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Sharpening of tungsten electrodes
Anti-corrosion
Heat protection
TIG POINTChemical sharpening of tungsten electrodes
Cat N°: W 000 011 101Instruction for use:• Make the electrode to be out from the torch of 15 mm.
• Use the welding current to warm the electrode to white.
• Dip the electrode in the product while rotating the electrode.
• Make sure that the result is satisfactory.
• Carefully close the pot.
THERMISHIELDHeat shield gelDescription:• It is designed to stop heat from travelling through most metals
during welding, brazing or soldering.• It prevents from distortion of metals and even plastics caused by
the heat of a welding torch.• Volume: 500 ml
Instructions for use:• Shake well before use and spray the
product over the surface to be protected.• Use in well ventilated areas only.
2006
-528
2007
-395
F+ Xi
IrritantExtremelyflammable
5-3
Cat N°: W 000 274 839
2009
-249
Cat N°: W 000 011 071
• Protects nozzles and contacttips from spatter by immersion.
• Silicone and solvent free.
• Odourless.
NETMIGAnti-spatter dip
Technical data:• Prevents spatter adhering to:
- To torch nozzles and contact tips,- To positioners and jaws of welding lathes.
• Does not clog threads or apertures. • Does not cause porosity. Silicone and solvent free. Odourless.• Base: waxes and oil.• Volume: 300 gr.
Instructions for use• Clean and degrease the area to be treated.• Shake the can before use at least for 1 minute.• Spray at 25 cm distance from the piece
by short and regular passes.
2007
-399
A wide range of materials:Steel, Ceramic, Plastic, Glass…
Many industries:• Boilers maker • Founders • Petrochemical• Railway • Nuclear • Shipyard • Automotive…
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
SKINCRIC
Crack detection
This non destructive technique allows thedetection of cracks opening on the surface of theplate helping a visual control, due to the cracksbecoming visible (30 to 50 µm).
1 - CleaningProduct: SKINCRIC C.10 S1 CLEANER
+ Product:• Perfect cleaning without dry rest.• Quick drying (evaporation).• Spray: - Spraying in all positions.
- 400 ml which is better than 500 to economise product.
Spray based on Butane Propane (extremely flammable).Solvent: Heptane.Necessity for protection (petroleum based) solvent.
3 - CleaningProduct: water
2 - Red penetrant sprayProduct: SKINCRIC P.138 SA PENETRANT
+ Product:• Temperature of use: 5 °C to 220 °C. Easy to use even on hot plates.• Good impregnation. A single spray lasts > than 30 min without drying.• Powerful penetration. Due to its viscosity.• Spray: works in all positions, 400 ml for economical use of the product.• Very good identification of cracks under white light.• Water washable penetrant. No “ground” noise.
Butane spraying (extremely flammable).
4 - DeveloperProduct: SKINCRIC R.764 S1 DEVELOPER
+ Product:• Thin and uniform film and transparent film. After drying the white surface
appears.• Very good surface coverage due to the thin granulometry.• Quick drying of the solvent included in the developer.• Spray: works in all position, 400 ml for a better use of the product.• Very good identification of the cracks under white light.
Butane spraying.
5 - Inspection of the defects
Cracks are visible at the surface of the plates,thanks to clear vivid red indications easily seen
by the naked eye (no uv light required).
5-4
5LI
QUI
DS, S
PRAY
SAN
D PA
STES
Very toxic to aquatic organisms, may cause long-termadverse effects in the aquatic environment. Irritating toskin. Extremely flammable. Vapours may causedrowsiness and dizziness. Keep away from sources ofignition - no smoking. Do not breathe the steams. Avoidrelease to the environment. Refer to specialinstructions/Safety data sheets. Pressurised container:protect from sunlight and do not expose to temperatures
exceeding 50 °C. Do not pierce or burn, even after use. Donot spray on a naked flame or any incandescent material.If swallowed, seek medical advice immediately and showthis container or label.• Propellant: Butane / Propane.• Base: Petroleum based solvent.• Volume: 400 ml (net) - 520 ml (nominal).
SKINCRIC C.10 S1 CLEANERPiece degreasing & cleaning of excess penetrant.
Direction for use:Spray SKINCRIC CLEANER until disappearance of red or purple PENETRANT traces.Drying time: 1-5 minutes.
Safety precautions:
Cat N°: W 000 011 096
NF+ Xi
IrritantDangerous for
the environmentExtremelyflammable
Irritating to eyes. Extremely flammable. Vapours may causedrowsiness and dizziness. Keep away from sources ofignition - no smoking. Do not breathe the steams.Pressurised container: protect from sunlight and do notexpose to temperatures exceeding 50°C. Do not pierce orburn, even after use. Do not spray on a naked flame or anyincandescent material. If swallowed, seek medical advice
immediately and show this container or label. Use only inwell ventilated areas.• Propellant: Butane / Propane.• Base: Isopropylic alcohol• Volume: 400 ml (net) - 520 ml (nominal).
SKINCRIC R.764 S1 DEVELOPERDetection of cracks and surface defects.Direction for use:Be sure that the area is clean and without penetrant last trace. Shake the can until hearingclearly the ball bearing. Spray at 20 cm for an uniform layer without super thickness. Wait a fewminutes until obtaining a dry powdery film before examining the surface.
Safety precautions:
Cat N°: W 000 011 097
F+ Xi
IrritantExtremelyflammable
Suitable for high temperatures: 5 °C to 220 °C. Extremelyflammable. Keep away from sources of ignition - no smoking.Pressurised container: protect from sunlight and do notexpose to temperatures exceeding 50°C. Do not pierce orburn, even after use. Do not spray on a naked flame or any
incandescent material. If swallowed, seek medical adviceimmediately and show this container or label. Use only in wellventilated areas. Do not breathe the steams.• Propellant: Butane / Propane.• Base: Petroleum based solvent.• Volume: 400 ml (net) - 520 ml (nominal).
SKINCRIC P. 138 SA PENETRANTNon destructive testing. Red water washable penetrantDirection for use:Be sure the area is clean. Spray at 20 cm SKINCRIC PENETRANT for a complete recover of the area.Let penetrate at least 10 minutes. Rinse with SKINCRIC CLEANER. Control with SKINCRIC DEVELOPER.
Safety precautions:
Cat N°: W 000 011 095
F+
Extremelyflammable
2006
-238
2006
-239
2006
-240
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Also available: ARDROX• ARDROX 9PR5 CLEANER Cat N°: W 000 011 080
• ARDROX 9VF2 PENETRANT Cat N°: W 000 011 078
• ARDROX 9D1 DEVELOPER Cat N°: W 000 011 079
Non destructivecracks detection
5-5
APPROVED
Stainless steel treatment
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Weldline proposes a complete rangeof product for stainless steel treatment.
There are three essential phases for a goodsurface treatment:
1 - Degreasing2 - Pickling3 - Passivation
The first two are « intermediate phases »,in the sense that they can be repeated indifferent working stages.The third, passivation, represents alwaysthe final treatment step.
1 CLEANOX(Degreasing- Liquid)
Degreasing is the essential procesbefore any thermal treatment.
It avoids incidental remains of oil ordust which interact (contamination)with the metal during welding orthermal treatment of stainlesssteel.
It can be repeated in the followingphases, in case further thermalprocessing is required, before thefinal passivation.
CLEANOX L (liquid) 6 kg W 000 266 423CLEANOX L (liquid) 30 kg W 000 266 425
How to use CLEANOX DEGREASER
Dilute the degreaser with 30% to 50% water and allow it to vaporizeon the surface to be treated. Leave for a few minutes to allow theproduct to act and then rinse with clean water. Do not expose theproduct or treated surface to sunlight or to any atmospheric agents.
2 PICKLINOX(Pickling - Product in gel,paste or liquid)
Pickling is the operation that permits,the remove of all oxides after welding,removing the surface layer following athermal treatment.
It is the most important step in thetreatment process.
A welding bead and generally aheated surface, lose their stainlessproperty (Cr < 12%).
For this reason, a pickling operationdoes not mean only cleaning thewelding bead but it restores thestainless steel characteristics.
PICKLINOX G (gel) 2 kg W 000 266 426PICKLINOX G (gel) 10 kg W 000 266 427PICKLINOX P (paste) 2 kg W 000 266 428PICKLINOX P (paste) 10 kg W 000 266 429PICKLINOX L (liquid) 30 kg W 000 266 422
How to use PICKLINOX GEL or PASTE
Degrease the surface to be treated with the specific CLEANOXproduct. Then apply a coat of PICKLINOX paste or gel. The exposuretime will vary from a few minutes up to 30 minutes depending on thetype of steel being welded. At the end of treatment remove the gel orthe paste with clean water.Do not expose the product or treated surface to sunlight or to anyatmospheric agents.
3 RESTORINOX(Passivation - Product in gel)
This is the final phase of theprocess, and is absolutelynecessary for restoring thestainless property. Withpassivation is created a « desiredoxidation ».
In fact this working phaserestores the chromium layerdamaged by heat shorteningthe spontaneous oxidation time.
In this way, the oxide layerwhich protects the surface fromexternal agents is restored.
RESTORINOX G (gel) 2 kg W 000 266 430RESTORINOX G (gel) 10 kg W 000 266 431RESTORINOX L (liquid) 30 kg W 000 266 424
How to use RESTORINOX
First degrease and pickle the part to be treated with CLEANOX andPICKLINOX. Then apply the product. The times required for exposurewill vary from 20 minutes up to 60 minutes. At the end of the treatmentremove the product with clean water.
Do not expose the product or treated surface to sunlight or to anyatmospheric agents.
Mandatorysafety toolsProtection kitWorking with acid products, the usershould use protective clothing carefully.The protection kit includes:
- 10 pairs of acid resistant gloves,- a pair of closed goggles,- a facial protection respirator against
acid vapours,- a full chemical protective suit.
Cat. N°: W 000 267 118
PaintbrushCompatible with acid.
Cat. N°: W 000 267 116
5-6
5LI
QUI
DS, S
PRAY
SAN
D PA
STES
2008
-388
2008
-382
2008
-386
2008
-387
2008
-385
2008
-383
2008
-389
2008
-384
2008
-390
Not contractual photos. Air Liquide Welding reserves the right to carry out modifications to itsmachinery without prior noticfe. The manufacturer accepts no liability for illustrations, descriptionsand characteristics, wich are for information only.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is a registered trademark Air Liquide Welding
PROFESSIONNAL PRODUCTS OF WELDING
OPTICLEANNew inverter-technology installationfor cleaning, polishing and markingof stainless steel.
2008
-835
5-7
Additional advantages:If, instead, you usually apply cleaning gel or paste.
• AESTHETICAL ADVANTAGE: does not leave stainson the steel. Cleaning gel or paste, leave stains asthey are very aggressive.
• ECOLOGICAL ADVANTAGE: does not producetoxic water requiring treatment, as the workpiece iscleaned with piece of damp cloth. In the traditionalsolution, for every metre of weld at least 5 litres ofwater have to be used to eliminate the cleaning solutions on the piece. This waterbecomes toxic and must be treated in very expensive treatment plants. Failure toobserve the law is a criminal offence.
• LOGISTIC ADVANTAGE: large outdoor areas are not required for cleaning as use ofthe machine does not generate toxic vapour emissions or the need for water treatmentplant. Being toxic, gel or paste must not be used in closed areas in order to prevent therisk of inhaling harmful vapours.
• ECONOMIC ADVANTAGE: It is not necessary to passivate after cleaning withOPTICLEAN. Cleaning with gel or paste, requires a further passivation phase in orderto reconstruct the chromium layer weakened through cleaning. If the passivationphase is not performed, the steel will no longer be stainless in the areas wherewelding and cleaning were performed.
Characteristics:• Includes a torch with a manual pump and liquid
cleaning hose inserted onto the torch itself.
• Works with alternating current and not direct current(electronic current control) "Inverter" technology.
Benefits:• Operators no longer have to dip the pump into the
liquid to clean the piece and therefore it is notnecessary to interrupt the operation several times(increased productivity).
• There is no longer any risk of ruining the metal if the torch accidentally touches the workpiece.
Technical Data:
Model OPTICLEAN Supply Voltage 220 V Frequency 50/60 Hz Capacity 300WElectrode Voltage 10/30V AC/DCIsolation Class IP23Noise level <10 dB (A)Machine weight (empty) 4,5 kgMachine dimensions 280 x 210 x 135 mm
DECLARATION OF CONFORMITY• Machinery Directive 98/37/EC and its
subsequent modifications• Low-voltage Directive 2006/95/EC• Electromagnetic Compatibility Directive
2004/108/EC
And the following harmonised standards:DIN EN ISO 12100-1, DIN EN ISO 12100-2, DIN EN60204-1, EN 55011, DIN EN 61000-6-4, DIN EN61000-6-2, EN 61000-4-2, EN 61000-4-4.
• Directive 2002/95/EC (RoHS Directive) –concerns the restriction of the use of sixspecific hazardous substances (cadmium,mercury, lead, hexavalent chromium,polybrominated biphenyls – Pbbs, andpolybrominated diphenyl ether PBDE) inelectrical and electronic appliances sold inthe EU.
2008
-754
2008
-753
To order:Equipments and products for cleaning
Complete installation Extra kitReference Name OPTICLEAN cleaning OPTICLEAN
W 000 271 933 W 000 271 938- OPTICLEAN Inverter • -- OPTICLEAN Torch • •
W 000 272 355 Inox narrow insert 60° • •W 000 272 354 Inox narrow insert 90° • •W 000 272 357 Inox standard insert 60° • •W 000 272 356 Inox standard insert 90° • •W 000 272 351 Narrow soft bond pad 90° • •W 000 272 348 Standard bond pad 90° • •W 000 272 352 Narrow soft bond pad 60° • •W 000 272 349 Standard bond pad 60° • •W 000 272 038 Neutral OPTICLEAN solution 100 ml • •W 000 272 346 Soft OPTICLEAN solution 100 ml • •
Equipments and products for polishing
Reference Name Polishing extra kit - W 000 271 935W 000 272 028 Narrow graphite insert 11 mm •W 000 272 030 Standard graphite insert 22 mm •W 000 272 034 Narrow brill bond pad 11 mm •W 000 272 036 Tampon brill bond pad 22 mm •W 000 272 035 Narrow teflon ring 11 mm •W 000 272 037 Standard teflon ring 22 mm •W 000 272 347 Brill OPTICLEAN solution 100 ml •
Equipments and products for marking
Reference Name Marking extra kit - W 000 271 936W 000 272 039 Graphite marking insert 35 mm •W 000 272 040 Marking felts insert •W 000 272 041 Stainless steel marking electrolyte 100 ml •
Cleaning, polishing andmarking of stainless steel.
6 - Flame
PROFESSIONAL WELDING PRODUCTS BYWELDLINE is an Air Liquide Welding trademark
• Hoses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
• Automatic roller for oxygas hoses . . . . . . . . . . . . . . . . . . . . . 6-1
• Quick action couplings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
• Cutting nozzles and other flame. . . . . . . . . . . . . . . . . . . . . . . . . 6-3
• Leakage control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
6F
LAM
E
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
HosesGas Ø Maximum Coil length Cat N°
(mm) pressure (bar) (m)
Acetylene 6.3 x 12 10 5 W 000 010 055
Oxygen 6.3 x 12 10 5 W 000 010 056
Acetylene 6.3 x 12 10 10 W 000 010 081
Oxygen 6.3 x 12 10 10 W 000 010 057
Acetylene 6.3 x 12 10 20 W 000 010 058
Oxygen 6.3 x 12 10 20 W 000 010 059
Acetylene 6.3 x 12 10 40 W 000 010 060
Oxygen 6.3 x 12 10 40 W 000 010 061
LPG* 6.3 x 12 10 20 W 000 010 052
LPG* 6.3 x 12 10 40 W 000 010 062
Argon 6.3 x 12 10 40 W 000 010 072
Argon 10 x 16 20 40 W 000 010 073
Oxygen 8 x 14 20 50 W 000 010 079
Acetylene 8 x 14 20 50 W 000 010 080
TWIN (Oxygen - Acetylene) 6.3 x 12 10 20 W 000 010 077
TWIN (Oxygen - Acetylene) 6.3 x 12 10 40 W 000 010 063
TWIN (Oxygen - Acetylene) 8 x 14 20 50 W 000 010 078
TWIN (Oxygen - Acetylene) 10 x 16 20 40 W 000 010 070
TWIN (Oxygen - Acetylene) 10 x 16 20 20 W 000 010 054
TWIN (Oxygen - LPG)* 10 x 16 20 40 W 000 010 076
LPG/Acetylene* 12.5 x 21 20 40 W 000 010 074
Oxygen 12.5 x 21 20 40 W 000 010 075
Acetylene 10 x 16 20 10 W 000 010 064
Oxygen 10 x 16 20 10 W 000 010 065
Acetylene 10 x 16 20 20 W 000 010 066
Oxygen 10 x 16 20 20 W 000 010 067
Acetylene 10 x 16 20 40 W 000 010 068
Oxygen 10 x 16 20 40 W 000 010 069
LPG 10 x 16 20 20 W 000 010 053
LPG/Acetylene* 10 x 16 20 40 W 000 010 071
Automatic roller for twinhoses diameter 8 or 10 mm.• Allows the operator to choose the hose
length suitable to his application• Maximum length for inside diameter
8 mm: 20 m• Maximum length for inside diameter
10 mm: 15 m
• Provided without hoses
Automatic roller for oxygas hosesTUBEREEL
EN 559
Cat N°: W 000 260 575
On the ground On a wall
From the ceiling
Roller’s dimensions
6-1
* Propylene excluded
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Quick action couplingsQUICKMATICQuick action couplings with auto-close
QUICKMATICØ hoses Cat N° Cat N°
(mm) female coupling male coupling
1 - fuel gases 6 and 10 W 000 011 002 W 000 011 005
2 - oxygen 6 and 10 W 000 011 001 W 000 011 004
3 - neutral gases (argon...) 4 W 000 011 003 W 000 011 006
These couplings are available to fit to hoses or directly ontoa regulator outlet.
Providing a quick release coupling, the female side always beenplaced at the source side of the flow.
Opening during use is possible. Closing once disconnected.
Complies with the ISO 7289 - EN 561 standards.
Hose connection
Regulator connection
QUICKMATIC ThreadCat N° Cat N° Ø hoses
female coupling male coupling (mm)
4 - fuel gasesM16x150L W 000 011 008
W 000 011 005 6 and 103/8"L W 000 011 011
M16x150R W 000 011 007
5 - oxygen 3/8"R W 000 011 010 W 000 011 004 6 and 10
1/4"R W 000 011 009
6 - neutral gases (argon...) 12x100R W 000 011 012 W 000 011 006 4
1
2
3
4
5
6
Also existsin kits:
W 000 011 015 W 000 011 016
W 000 011 017
2004
-819
2004
-819
2004
-819
2004
-819
2004
-820
ISO 7289 - EN 561
6-2
6F
LAM
E
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Inspection mirror
Circular telescopic mirror
Welding mirror with magnetic stand.
For all angle viewing. Fast and accurate visual inspection ofhidden areas with an almost limitless number of positions.
Spare part: mirror.
Cat N°: W 000 010 557
Cat N°: W 000 273 291
Cat N°: W 000 010 558
2004
-643
Spark lighter
Traditional tool with five renewal flints.
Cat N°: W 000 010 97808
76-6
6
Tip cleaners
Used to clean welding and cutting nozzlesto restore nozzle performance. Contains arange of round needle files in a metal carrycase.
Cat N°: W 000 290 900
0876
-66
PROTECFLAMHeat shield protection for walls and floors during gas welding, brazing or soldering.
PROTECFLAMSingle use 200 x 250 mm
PROTECFLAM +Very flexible (memory effect)Long life duration200 x 250 mm
PROTECFLAM TechnoBoth sides usable, rigid shape, very long life duration.210 x 280 mm
Cat N°: W 000 271 449
Cat N°: W 000 265 182
Cat N°: W 000 237 551
2005
-272
2004
-642
Cutting nozzlesand others flame
G1 profileGauge
Cutting IC profile
(mm)thickness
Acetylene (mm) Acetylene
W 000 262 059 7/10 3-10 W 000 262 089
W 000 262 060 10/10 10-25 W 000 262 091
W 000 262 061 12/10 25-50 W 000 262 093
W 000 262 062 16/10 50-80 W 000 262 094
W 000 262 063 20/10 80-120 W 000 262 095
W 000 262 064 25/10 120-200 W 000 262 096
W 000 262 065 30/10 200-300 W 000 262 097
Propane/Tetren/Natural gas Propane/Tetren/Natural gas
W 000 262 066 7/10 3-10 W 000 262 098
W 000 262 067 10/10 10-25 W 000 262 099
W 000 262 068 12/10 25-50 W 000 262 100
W 000 262 069 16/10 50-80 W 000 262 101
W 000 262 070 20/10 80-120 W 000 262 102
W 000 262 071 25/10 120-200 W 000 262 105
W 000 262 072 30/10 200-300 W 000 262 106
6-3
0327
-033
0327
-031
G1 cutting nozzlesand IC cutting nozzles
visuel à venir
visuel à venir
Asbestos free
No toxic fumes
release
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Leakage control
6-4
6F
LAM
E
A high-return productfor leak detectionsuitable for all gasesexcept high pressureoxygen > 150 bars.
Cat N°: W 000 010 963 Cat N°: W 000 011 090
2007
-794
2000
-228
• Volume: 400 ml (net)650 ml (nominal)
• Propellant gas: nitrogen• Base: water
BUBBLEA leakage controllersuitable for all gases.
1000 BULLES
• Volume: 400 ml (net)650 ml (nominal)
• Propellant gas: nitrogen protoxyde• Base: lauryether natrium sulfate
Heat protection
THERMISHIELDHeat shield gelDescription:• It is designed to stop heat from travelling through most metals
during welding, brazing or soldering.• It prevents from distortion of metals and even plastics caused by
the heat of a welding torch.• Volume: 500 ml
Instructions for use:• Shake well before use and spray the product over the
surface to be protected.• Use in well ventilated areas only.
Cat N°: W 000 274 839
2009
-249
7 - Cutting and grinding disks
PROFESSIONAL WELDING PRODUCTS BYWELDLINE is an Air Liquide Welding trademark
• Cutting and grinding disks . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 to 7-4
7G
RIN
DIN
G
Cutting and grinding disks
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
WELDLINE is offering a rangeof cutting and grinding disksdesigned for the main applicationsof industrial customers
� Two extra thin cutting disks of 1 mm for steel and stainless steel.
� Flat and depressed centre, hard cutting disk range for structural steel.
� A range of hard grinding disks for structural steel.
� A range of abrasive flap disks for grinding, finishing and cleaningapplications.
Pictograms description
Necessary safety Read manualequipment to be instruction of Steel and used the machine stainless steel
When buying such products,
always ask for OSA certification.
The guarantee that the product
complies with the safety standard
and the additional requirements
of the Organisation for the Safety
of Abrasives
Not for sidegrinding!
Do not usedamaged disks
Red line means maximum speed 80 m/s
Wheel Maximum revolutiondiameter at 80 m/s
115 mm 13 300 rpm
125 mm 12 250 rpm
180 mm 8 500 rpm
230 mm 6 650 rpm
EN 12413EN 13743
7-1
Cutting and grinding disks
DUCTIFLEX PROTop quality cutting disksfor professional
Caracteristics:• Maximum speed 80 m/s
• Diameter 115 to 230 mm
• Thickness 1.0 to 3.2 mm
• Should be used within 3 years from the production date
• Design for steel, except the extra thin disksdesigned for steel and stainless steel
A range of high quality productproviding an ideal balance betweenperformance and life duration.
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
• Extra thin wheels providing a fast and economicalcutting performance on steel and stainless steel.
• Extra long product life• High cutting speed• Specially efficient on steel bars, pipes, sheets
or shaped sections• No need to eliminate burr after cutting• Less material waste
Same quality with depressed center
• Hard cutting disks for structural steel.• Long life duration• Iron and structural steel cutting
Recommendations:
Cutting will be faster by using a smallercontact surface between the diskand the work piece
* Explanation of the specification: See next page
Dimension Shape Use Specification* Unit / box Catalogue N°
115 x 1 x 22 mm flat steel/stainless steel 61A 60 S7 BF 50 W 000 261 930
125 x 1 x 22 mm flat steel/stainless steel 61A 60 S7 BF 50 W 000 261 931
115 x 1.6 x 22 mm flat steel/stainless steel 61A 60 S7 BF 50 W 000 335 001
125 x 1.6 x 22 mm flat steel/stainless steel 61A 60 S7 BF 50 W 000 335 002
115 x 2 x 22 mm flat steel A 36 S7 BF 25 W 000 261 932
125 x 2 x 22 mm flat steel A 36 S7 BF 25 W 000 261 933
180 x 2 x 22 mm flat steel A 36 S7 BF 25 W 000 261 934
230 x 2 x 22 mm flat steel A 36 S7 BF 25 W 000 261 935
180 x 2.5 x 22 mm flat steel A 36 S7 BF 25 W 000 261 936
230 x 2.5 x 22 mm flat steel A 36 S7 BF 25 W 000 261 937
115 x 3.2 x 22 mm flat steel A 36 S7 BF 25 W 000 261 938
180 x 3.2 x 22 mm flat steel A 36 S7 BF 25 W 000 261 939
230 x 3.2 x 22 mm flat steel A 36 S7 BF 25 W 000 261 940
115 x 2.5 x 22 mm depressed steel A 36 S7 BF 25 W 000 261 941
115 x 3.2 x 22 mm depressed steel A 36 S7 BF 25 W 000 335 005
125 x 2.5 x 22 mm depressed steel A 36 S7 BF 25 W 000 261 942
125 x 3.2 x 22 mm depressed steel A 36 S7 BF 25 W 000 335 006
180 x 2.5 x 22 mm depressed steel A 36 S7 BF 25 W 000 261 943
230 x 2 x 22 mm depressed steel A 36 S7 BF 25 W 000 335 003
230 x 2.5 x 22 mm depressed steel A 36 S7 BF 25 W 000 261 944
230 x 3.2 x 22 mm depressed steel A 36 S7 BF 25 W 000 335 004
7-2
7G
RIN
DIN
G
2007
-111
Cutting and grinding disks
DUCTIFLEXA grinding range for standardstructural steel
Caracteristics:• Steel surface cleaning, deburring, angle and corner dressing
• Very good balance between performance and price,long life product
Dimension Shape Use Specification* Unit / box Catalogue N°
115 x 6 x 22 mm depressed Standard steel A 30 S7 BF 10 W 000 261 945
125 x 6 x 22 mm depressed Standard steel A 30 S7 BF 10 W 000 261 946
180 x 6 x 22 mm depressed Standard steel A 30 S7 BF 10 W 000 261 947
230 x 6 x 22 mm depressed Standard steel A 30 S7 BF 10 W 000 261 948
Explanation of the specification
XXX XX X XX XXAbrasive Grit Hardness Structure Bond
type size
Abrasive typeA: Regular Aluminium oxide. For plain and low alloyed steel, cast steel and chilled cast iron61A: Mixed Aluminium oxide. For grinding stainless steel and acid resisting steel
Grit size16 20 22 24 30 36 40 46 54 60 70 80 90 100 120 150
Coarse Medium FineCoarse for works without special precision, to fine for smoother surface
Hardness gradeE F G H I J K L M N O P Q R S
Very soft Soft Medium HardSoft grade are dedicated to hard materials, hard grade to softer materials
Structure3 4 5 6 7 8 9 10 11 12 13
Closed Medium Open Very openRatio between grain, bond and pore. The softer the material is the more open structure is recommended
BondV B BF
Vitrified bonded Resinoid bonded Glass fibre Resinoid bond are more flexible, for dynamic and forceful use than vitrified bondGlass fibre increase the resistance specialty for heavy usage
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY7-3
2007
-108
These disks are made by cuttingabrasive fabrics, then cutting as flapsand bonding them on a fiberglass ornylon backing plate by an adhesive.
Our DUCTIFLAP disks are based on Zirconia Alumina,specially design for steel, alloyed steel, non ferrousmaterial; cast iron, wood and plastic.
We use conical disks as it’s possible to use them forcurve surface, for edge grinding as well as lubricious rprimed surfaces.
The grits are either 40, 60 or 80 the higher the grit is, themore precise the result is.
The types are 115 x 22 mm and 125 x 22 mm.
Bonding material: synthetic resin bonding phenolic resins.
Backing plate: fibreglass or nylon (plastic).
Filler: kryolits, calcide.
Shape: flat or conical 15%.
Personnal protection: protect your eyes and ears, wear a dust mask, safety gloves, (safety shoes & leather apron are recommended).
Storage: in dry and well ventilated areas.
Temperature between 18 and 22 °C, relative humidity between 45 and 60%.
The speed of the machine must never exceed the maximum operating speed of the disk: 80 m/s.
Cutting and grinding disksDUCTIFLAPAbrasive flap disks
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY 7-4
7G
RIN
DIN
G
Dimensions Grit Unit/box
Shape
15 % conical forfiberglass backing
Flat for nylon backing
115 x 22 mm
40 10 W 000 264 532 W 000 273 754
60 10 W 000 264 533 W 000 273 759
80 10 W 000 335 007 W 000 273 758
125 x 22 mm
40 10 W 000 264 535 W 000 273 757
60 10 W 000 264 534 W 000 273 756
80 10 W 000 335 008 W 000 273 755
2009
-010
2009
-011
8 - Welder protection
PROFESSIONAL WELDING PRODUCTS BYWELDLINE is an Air Liquide Welding trademark
• Helmets and handshields. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 to 8-9
• Goggles and spectacles. . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10 to 8-14
• Welding glasses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15 to 8-16
• Leather clothes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17 to 8-22
• Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-23 to 8-30
• Cotton clothes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-31 to 8-32
• Shoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-33 to 8-39
8W
ELD
ER
PR
OT
EC
TIO
N
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
HelmetsChoice of head protectionHandshield would be chosen for punctual or discontinueuse. In case of continual welding, a helmet is necessary.
Electronic helmet allows the welder to be protectedimmediately and automatically when the welding operationbegins. The result is a better efficiency of his job, a bettercomfort, and at least a better result.Electronic helmets could be with fixed or variable shades.
The choice is depending of the kind of process.
Handshield and passive helmets offer light duty or heavyduty products:
• Light duty: you will prefer thermoplastic products(light, low price, flexible)
• Heavy duty: generally polyester withfibreglass (heat resistant, spatter’sresistance)
The size of the window depends on countrieshabits.
All products have to be in accordance withEU standards and CE marking is mandatory:EN 175.
EN 175
8-1
CHAMELEON 33 new solutions, one new helmet
CHAMELEON 3 FMMA and MIG/MAG welding up to 175 A
- Type : fixed shade DIN 3/11- ADF Dimensions : 110 x 90 x 5 mm- Viewing area : 94 x 35 mm- Light shade : DIN 3- Dark shade : DIN 11- Switching time light-dark: 1/3600 sec- Switching time dark-ligth: 0.12 sec- 2 independent optical sensors- Solar cells power supply- Permanent protection against UV and IR- Conformity to- Warranty: 2 years
Cat. N°: W 000 260 973
CHAMELEON 3 VCurrent MMA
and MIG/MAG welding
- Type : variable shade DIN4/9-13- ADF Dimensions : 110 x 90 x 10 mm- Viewing area : 97 x 47 mm- Light shade : DIN 4- Dark shade : Variable from 9 to 13- Switching time ligth-dark: 1/16000 sec- Switching time dark-ligth: adjustable between
0.1 and 1 sec- Sensitivity adjustment - 2 independent optical sensors- Lithium battery 3V and solar cells power supply- Permanent protection against UV and IR- Conformity to- Warranty: 2 years
Cat. N°: W 000 260 972
CHAMELEON 3 V+All processes
including TIG welding
- Type : variable shade DIN4/9-13- ADF Dimensions : 110 x 90 x 10 mm- Viewing area : 97 x 47 mm- Light shade : DIN 4- Dark shade : Variable from 9 to 13- Switching time ligth-dark: 1/20000 sec- Switching time dark-ligth: adjustable between
0.1 and 1 sec- 2 independent optical sensors high sensitivity - Lithium battery 3V and solar cells power supply- Permanent protection against UV and IR- Conformity to- Warranty: 2 years
Cat. N°: W 000 260 971
All the comfort and security of liquid crystaltechnology in a protecting and comfortablewelding helmet
• Covering shape for an optimized head protection• Silver color• Adjustable head-gear delivered with comfort cushion• Weight with ADF: CHAMELEON F: 410 g,
CHAMELEON 3V and V+: 455 g• Delivered with 5 outside protection plates
and 3 inside protection plates.
New designImproved design and comfort
3 models:
• CHAMELEON 3 F: with fixed shade
Cat N°: W 000 261 351
• CHAMELEON 3 V: variable shadespecially designed for MMA, MIG/MAG
Cat N°: W 000 261 352
• CHAMELEON 3 V+:Variable shade covering allprocesses especially TIG
Cat N°: W 000 261 353
New version with improved functionality.CHAMELEON 3 (V and V+) helmets, nowincorporating new technological features:• Auto on function: it is not necessary to push the “on” button before
starting to weld. Automatic starting.
• Reset button: in the event of a dysfunction of the electronic system,press the reset button twice and this will re-initialize the originalparameters.
• Grinding mode: a fixed shade 4 is activated, to ensure optimumprotection when grinding.
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Electronic helmets
8-2
8W
ELD
ER
PR
OT
EC
TIO
N
EN 175EN 379
EN 379
EN 379EN 379
ZEPHYR HELMETThe ultimate protection of the Welder
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY8-3
Electronic helmets
The ZEPHYR Helmet
ZEPHYR insure you highercomfort and protection witha new high performance liquidcrystal cell, an extra-wide visionand an extreme reliability.
ADF and protection plateare easy extractable with apressure on the push button.
Adjustable head gear(4 positions), optimized designto insure a good coveringof the head, and a light weight.
The new version Advance 3000 presents 3 innovations: • Auto-start function: it is not necessary to push the “on”
button before starting to weld. Automatic starting.• Reset button: in case of a dysfunction of the electronic
system, press the “reset” button twice to re-initializethe original parameters.
• Grinding mode: a fixed shade 4 is activated,to ensure optimum protection when grinding.
Advance 3000 ADF V4/9-13
Advance 3000 V4/9-13 ADF Advance 4000 V4/9-13 ADF
Optical class 1 / 3 / 1 1 / 3 / 1
Switching time ligth-dark 0.0005 second 0.0005 second
Switching time dark-ligth Adjustable between 0.1 and 1 sec Adjustable between 0.1 and 1 sec
Sensitivity adjustment Uninterrupted 10 positions per digital keys
Sensors 4 independent optical sensors4 independent optical sensors turning magnetic in “X mode”
Viewing area 97 x 60 mm 97 x 60 mm
Light shade Shade 4 Shade 4
Dark shadeAdjustable with potentiometer Adjustable with digital key
from 9 to 13 from 9 to 13
Grinding mode Yes - shade 4 Yes - shade 4
Cutting / flame welding mode No Yes - shade 5 to 9
Constant protection UV / IR Yes Yes
Power supply Lithium CR2450 3 Volt batteries Lithium CR2450 3 Volt batteries
Solar cells Yes Yes
Working temperature -5 °C to +55 °C -5 °C to +55 °C
Storing temperature -30 °C to +70 °C -30 °C to +70 °C
Eyes protection standard CE EN 379 CE EN 379
Discover a new full solution designed to protect yourwelders in the best way of efficiency and comfort.With the ZEPHYR solution, you will findin a rugged transport bag:
• the ZEPHYR 4000or 3000 helmet,
• the ZEPHYR air flow system,
• a protected hose insuringthe connection,
• a shoulder strap,
• a battery charger,
• a flow-meter,
• one extra filter.
Advance 4000 ADF V4/9-13The top-of-the-range solution for any application: 4 adjustment modes from an LCD screen with digital keys: • Welding: variable shades 4/9-13, 4 optical sensors, regulation
of the sensitivity and of the return to a clear shade.• Grinding: activation of the filter in clear shade level 4.• Cutting, low current welding: adjustable shades 5 to 9 for TIG
process low intensity, microplasma, oxyacetylenic welding…• “X mode”: adjustable shade 4*9-13 with magnetic sensors
for outside or obscured arc welding…
Technical characteristics of the Advance ADFs
Two ADFs with wide vision field Helmet with powered air
purifying respirator
2008
-247
2008
-242
2006
-458
W-4
0iW
(1)
EN 175
EN 379
Hose connection and hose capThe connection between the flow system and the helmetis made through a hose. The connection with the air flowsystem is water proofed. With the helmet, it is a quickconnection allowing a good flexibility when the welderturns the head. The hose is protected with an outer covering(75% cotton, 25% Kevlar)
• Pre filterCat N°: W 000 271 207
• Particle filter P3Cat N°: W 000 271 208
• Carbon filter (odours filter)Cat N°: W 000 271 209
• Battery (standard)Cat N°: W 000 271 210
• Battery (Long life)Cat N°: W 000 274 379
• Battery chargerCat N°: W 000 271 211
• Advanced 4000 filter alone Cat N°: W 000 260 974
• Advanced 3000 filter alone Cat N°: W 000 260 839
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Electronic helmets
8-4
8W
ELD
ER
PR
OT
EC
TIO
N
Inside, 3 kinds of filters can be included. • One pre filter against the biggest particles• One particle filter against the dust (> 0.3 micron)• One carbon filter against the fume, odourThe whole system is water proofed
The ZEPHYR air flow system Air flow system: 2 flows rates (low 160 l/min and high 200 l/min).This equipment includes an indication of the flow chosen, an indication of thebattery charge, and two alarms in case of flow insufficiency: a tone and avibration. This is important for the welder who is often in a noisy environment.A specific system sends the tone through the hose to bring the soundto the welder. The belt as well as the shoulder strap are made in flameretardant material, a big advantage also. The belt includes a cushion insuringa good level of comfort.Disconnecting the battery is easy with only one button to push.It is a lithium battery with a 8-hour lifetime duration. A stronger onecan be put in place for special cases with 14-hour duration ±5% (on request).No need to fully discharge the Li-Ion battery before recharging it.Opening the filter is also easy with a quarter left, two symbols indicate if it’slocked or open and when the filter box is open, the indications are also writtenindicating the positions.
Join us on the ZEPHYR green weldingTo order:• Complete ZEPHYR
solution with Advanced 4000 ADF:Cat N°: W 000 271 201
• Complete ZEPHYRsolution with Advanced 3000 ADF:
Cat N°: W 000 271 202• ZEPHYR shell without lens
Cat N°: W 000 271 212
• Comfort Belt Cat N°: W 000 271 203
• Shoulder strapCat N°: W 000 271 204
• Hose 110 cmCat N°: W 000 271 205
• Hose protective coverCat N°: W 000 271 206
2
Flow circulationYou can choose between:• a top down air flow,
coming from the topof the helmet (1)
• or a lateral flowcoming from each sideat the mouth level (2),
• or a mixed of thistwo solutions.
This feature insures alsoa very good comfort tothe welder.
1
2008
-242
2008
-243
2008
-244
2008
-246
EN 12941-TH2P
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Passive helmetsand handshields
HAND TP
SOLIDO
SUPER AIGLON
SUPER ECLIPSE
FG
SUPER NILMELIOR
SOLIDO
“Light” solutions
Han
dsh
ield
sH
elm
ets
“Heavy duty”
8-5
TP
SOLIDOFlip up
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Passive helmetsand handshields
SUPER ROBUR
SUPER ROBURFlip up
WELDLUX
Grain leather
Adjustable headgear “A”
Headgear “B”
Leatherprotection
Folding mask
solutions Particular uses
8-6
HAND FG
HAND FGLift
8W
ELD
ER
PR
OT
EC
TIO
N
Sweat band
Handshields
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
• Thermoplastichandshield
• Light weight: 332 gr
• Medium resistance
• Low price
Single window 75 x 98 mm
Single window 105 x 50 mm or 108 x 51 mm*
HAND TP
Cat N°: W 000 011 121
* accept also 110 x 90 mm glasses
• Reinforced polypropylene
• Handshield
• Light and well balanced
• Good resistance < 100 °C
• Ergonomic form
• Optimized coveringof the head
• 405 gr
SOLIDO
Cat N°: W 000 335 126
“Light” solutions
8-7
2007
-831
2007
-819
Single window 105 x 50 mm or 108 x 51 mm
Cat N°: W 000 335 125
Handshields
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
1415
-24N
0947
-77
2007
-828
2007
-830
Window 105 x 50 mmor 108 x 51 mm
Cat N°:W 000 011 116
Cat N°:W 000 011 117
SUPER AIGLON
HAND FG
• Fibreglass
• Light weight: 315 gr
• Fibreglass
• Sliding knob opens
• 424 gr
• 100 x 25 mm window
• Polyester reinforced fibreglass
• Inside handling
• Hand and face protected
• 500 grammes
• Excellent resistance < 400 °C
Cat N°:W 000 011 118
Cat N°:W 000 011 122
Cat N°:W 000 011 123
SUPER ECLIPSE• Polyamide
• Inside handling
• Lift system for the filteringlens to move it duringpitting operation
• 520 grammes
• Excellent resistance < 400 °C
“Heavy duty” solutions
8-8
HAND FG Lift
8W
ELD
ER
PR
OT
EC
TIO
N
Window 110 x 90 mm
Window 110 x 90 mm Lift window 110 x 90 mm
Window 105 x 50 mmor 108 x 51 mm
Passive helmets
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
TP• Thermoplastic helmet
• Low price
• Single window 108 x 51, 98 x 75 mm or 110 x 90 mm
• Adjustable headgear “B”
• Delivered without glass
• 420 gr
Helmet SOLIDO• Reinforced polypropylene
• Glass easy to remove
• Good resistance < 100 °C
• Adjustable headgear “A”
• 350 gr
SOLIDO Flip up• Reinforced polypropylene
• Extra wide clear window when opened
• Glass easy to be removed
• Adjustable headgear “A”
• Good resistance < 100 °C
• 360 gr
“Light” solutions
Window 108 x 51 mm or 105 x 50 mm
Cat N°: W 000 335 137
Cat N°: W 000 011 113
Window 98 x 75 mm
Cat N°: W 000 011 114
Cat N°: W 000 335 136
Window 105 x 50 mm or 108 x 51 mm*
Cat N°: W 000 335 127
BasseDeéfinition
8-9
Window 110 x 90 mm
2007
-833
2007
-821
2007
-826
Window 105 x 50 mm or 108 x 51 mm
* accept also 110 x 90 mm glasses
Cat N°:W 000 335 131
• Polyester reinforced fibreglass
• Humidity and heat resistant (400 °C)
• Adjustable headgear “A”,
• 435 grammes
Passive helmets
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
“Heavy duty” solutions
Cat N°: W 000 011 103
Window 110 x 90 mm
Cat N°: W 000 011 104
Cat N°:W 000 260 438
FG• Reinforced fibreglass
• Adjustable headgear “B”
• Delivered without window
• 414 gr
SUPER NILMELIOR WELDLUX• Polyester fibreglass reinforced
• Heat resistant (170 °C)
• 555 grammes
• Adjustable headgear “A”
Window 105 x 50 mm or 108 x 51 mm
Cat N°: W 000 260 437
Window 105 x 50 mm Flip up
Cat N°: W 000 335 130
Window 110 x 90 mm
Cat N°: W 000 335 129
SUPER ROBUR
0947
-79N
0950
-69N
2007
-832
BasseDeéfinition
• Enveloping profile providingexcellent throat and neckprotection
• Fibreglass reinforcedpolyester
• Heat (170 °C) andhumidity resistant
• Headgear with rack,rugged and verycomfortable
• Very lightweight(390 grammes)
8-10
8W
ELD
ER
PR
OT
EC
TIO
N
Window 105 x 50 mm or 108 x 51 mm
Double window105 x 50 mm,108 x 51 mm
or 105 x 32 mmUltra wide window
114 x 133 mm
Cat N°:W 000 010 884
Cat N°:W 000 011 135
Cat N°:W 000 011 115
Passive masks: leather
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
0254
-53
0254
-55
2007
-818
1198
-22
2007
-817
Grain leather• Grain leather
• Ideal for supervisors
• Very light(120 grammes)
For ROBUR, SOLIDOand NILMELIOR helmets.
For TP and FG helmets.
Headgear “A”
Headgear “B”
Sweat band
Leatherprotection
Grain leather• Ideal for working in extremely restricted areas
• Adjustable headgear
• 250 grammes
Spare parts
Cat N°:W 000 011 137
Cat N°: W 000 335 139
8-11
Window105 x 50 mm
or 108 x 51 mm
Lift Window 105 x 50 mm or 108 x 51 mm
Cat N°:W 000 260 486
2007
-817
For WELDLUX helmets.
Headgear “C”
Cat N°:W 000 335 158
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
GogglesChoice criteria: Goggles are used mainly to protect the eyes againstlight produced by flame welding or cutting or againstmechanical particles (grinding for example).
Welding goggles or protective goggles.Design or personal preference:
• PILOT range with round lenses• CLASSIC range • FASHION range
Verify the product conforms with the EN standards (CE marking confirms conformity)
Main EN Standards are:- EN 166 for basic conditions- EN 169 for welding filters- EN 170 for UV filters- EN 171 for IR filters- EN 172 for sunglasses filters- EN 175 for personal eye-protection during welding
Marking of the frame:• EN 166 standard• Resistance to impact:
� A: High energy impact � B: Medium energy impact � F: Low energy impact � S: Increased strength
Filter identification code� UV: 2 or 3� IR: 4� Sun: 5 or 6� Welding: 4 to 7
(see chart)
Numerical filter scale (protection level)� UV: 1.2 to 5� Infrared (IR): 1.2 to 10� Sun filters: 1.1 to 4.1� Welding filters: 4 to 14
Attention: Goggles can not beused for arc welding > 7 due to UV, IR and skinprotection requirements.(recommendations of welding filterglass can be seen on page 9-22)
Usage (Optical class):� 1: Continuous use� 2: Medium use� 3: Occasional use
Resistance to impact:� A: High energy impact� B: Medium energy impact� F: Low energy impact� S: Increased strength
Possibilities:� 8: Short circuit resistance� 9: Spatter resistance� K: Abrasion resistance� N: Mist resistance� T: Temperature resistance between -5 °C to +55 °C
Manufacturer's identification
Lens marking:
X - X.X X X X X
q = acetylene flow rate l/h
q 70 70 < q 200 200 < q 800 q > 800
Flame welding4 5 6 7
Brazing and soldering
q = oxygen flow rate l/h
900 q 2 000 2 000 < q 4 000 4 000 < q 8 000
Oxy-cutting 5 6 7
Welding scale
8-12
8W
ELD
ER
PR
OT
EC
TIO
N
GogglesPILOT welding rangePILOT FLIP UP
• Flip up lenses anti-scratch treated• Elastic headband• Indirect ventilation value• Weight: 137 g
Shade 5 - Cat N°:W 000 011 046
PILOT 2 PLASTIC
• Double cup black plastic frame with nose bridge adjustment• Side ventilation value• Adjustable elastic headband• Weight: 65 g
PILOT 2 METAL• Double cup metal frame with nose bridge adjustment• Adjustable elastic headband• Weight: 80 g
PILOT 1
• One piece soft black PVC frame allowing quick lens replacement• Elastic headband• Aerated side covers honeycombed casing for good ventilation
and to prevent from lens dimming• Weight: 60 g
Shade 5 - Cat N°:W 000 011 047Shade 6 - Cat N°:W 000 011 048
Shade 5 - Cat N°:W 000 011 050
PILOT protection range
PILOT 2 METAL• Double cup metal frame with nose bridge adjustment• Adjustable elastic headband• Weight: 80 g
Clear - Cat N°:W 000 011 051
PILOT 1 PLASTIC
• One piece soft black PVC frame allowing quick lens replacement• Elastic headband• Aerated side covers honeycombed casing for good ventilation
and to prevent from lens dimming• Weight: 60 g Clear - Cat N°:
W 000 011 049
Shade 5 - Cat N°:W 000 011 052
2005
-252
2005
-254
0947
-89
2005
-255
0947
-88
2005
-253
EN 166 - EN 169 - EN 175
EN 166
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY8-13
EN 175
EN 166EN 169
EN 166EN 169
EN 175
SpectaclesCLASSIC welding rangeCLASSIC OVER
• Over spectacles• PC anti-scratch treated lens• Weight: 40 g• Side ventilation Shade 5 - Cat N°:
W 000 011 054
CLASSIC WELDING
• Anti-scratch surface• Nylon frame and side shields• Changeable polycarbonate lenses• Central screw for quick lens replacement• Weight: 35 g Shade 5 - Cat N°:
W 000 011 055
CLASSIC protection range
PILOT welding range
CLASSIC VISIT FIRST
• Panoramic spectacles, side shields ventilation and also usable as over spectacles
• Polycarbonate lens and frame• Weight: 40 g Clear - Cat N°:
W 000 011 056
CLASSIC VISIT CLEAR
• Anti-scratch surface• Nylon frame and side shields• Changeable polycarbonate lenses• Central screw for quick lens replacement• Weight: 35 g Clear - Cat N°:
W 000 011 057
2005
-256
2005
-258
2005
-259
2005
-257
EN 175
EN 166
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY 8-14
8W
ELD
ER
PR
OT
EC
TIO
N
PILOT EVEREST• Standard black spectacles with foldable polyamide side
shields and frame• Central screw for quick lens replacement• Weight: 70 g
Shade 5 - Cat N°:W 000 011 053
1198
-29
EN 175
SpectaclesFASHION welding rangeFASHION WELDING
• Red/black frame with a single anti-scratch polycarbonatelens giving 180° field of vision
• Very attractive design• Soft terminal tips to eliminate local pressure• Temples length regulation and inclination angle• Weight: 30 g
FASHION WELDING MAX
• Black frame with a single anti-scratch polycarbonate lens giving180° field of vision
• Wrap-around design• Adjustable arms both length and slope to a degree• Weight: 35 g
Shade 3 - Cat N°:W 000 011 058Shade 5 - Cat N°:W 000 011 059
Shade 3 - Cat N°:W 000 011 060Shade 5 - Cat N°:W 000 011 061
FASHION protection range
FASHION VISIT
• Impact resistant• Polycarbonate single lens• Sports and ergonomic design• Weight: 22 g
Cat N°
Clear W 000 011 062
Smoked W 000 011 063
Yellow amber W 000 011 064
Silver mirror W 000 011 065
2005
-250
2005
-261
EN 175
EN 166
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY8-15
2008
-253
2008
-254
2008
-251
2008
-252
GogglesWelding mask• 180° field of vision• Durable and adjustable elastic headband• Indirect ventilation• Anti-mist and anti-scratch treated and wearable as over
spectacles or with a respiratory mask• Weight: 110 g
Grinding masksFIRST
• Anti-scratch polycarbonate lens• Direct ventilation • Adjustable elastic headband• Weight: 75 g Clear - Cat N°:
W 000 011 068
STAR
• Anti-scratch and anti-mist treated with adjustable elastic headband• Soft foam for better adherence to the user’s face• Weight: 55 g
Clear - Cat N°:W 000 011 070
OVER
• 180° field of vision• Durable and adjustable elastic headband• Indirect ventilation• anti-mist and anti-scratch treated and wearable as over spectacles
or with a respiratory mask• Weight: 85 g Clear - Cat N°:
W 000 011 069
Shade 5 - Cat N°:W 000 011 066Shade 3 - Cat N°:W 000 011 067
2005
-263
2005
-264
2004
-962
2005
-265
EN 175
EN 166
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY 8-16
8W
ELD
ER
PR
OT
EC
TIO
N
Welding glassesWELDGLASS
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
1
2.5
5
10
20
30
40
60
80
100
150
175
200
225
250
300
350
400
450
500
Current (A )
Coatedelectrodes
MIGHeavy metals
MIGLight alloy
MAG TIG Gouging PLASMACutting
PLASMAWelding
Choose the lens shade adapted to your working conditions
11
10
9
8
14
11
10
14
14
11
15
14
11
15
10
9
876
13
12
11 12
11
11
10
10
14
14
12 1211
10
9 9
14
13
8
13
1313
12 1212 12
13 13
13
15 15
8-17
EN 166: Clear glassesEN 169: Coloured glasses
2007
-839
2007
-840
Welding glassesWELDGLASS
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
� GOLDEN PROTANE® glasses
Skinpack
Dimension105 x 50 mm
Shade Dimension133 x 114 mm
Skinpack
5 pieces W 000 335 025 9 W 000 335 063 5 pieces
5 pieces W 000 335 026 10 W 000 335 064 5 pieces
5 pieces W 000 335 027 11 W 000 335 065 5 pieces
5 pieces W 000 335 028 12 W 000 335 066 5 pieces
5 pieces W 000 335 029 13 W 000 335 067 5 pieces
� Circular glasses diameter 50 mm
DimensionClear glass (EN 166) Protection plate CR-39® (EN 166)
Skin pack - 5 pieces Box - 100 pieces Skin pack - 5 pieces Box - 150 pieces
98 x 75 mm W 000 335 098 W 000 010 950 W 000 335 100 W 000 335 099
105 x 50 mm W 000 335 018 W 000 010 926 W 000 335 020 W 000 335 019
108 x 51mm W 000 335 056 W 000 010 962 W 000 335 058 W 000 335 057
110 x 90 mm W 000 335 044 W 000 010 938 W 000 335 046 W 000 335 045
133 x 114 mm W 000 335 069 - W 000 335 071 W 000 335 070
� Filtering coloured glasses
8-18
8W
ELD
ER
PR
OT
EC
TIO
N
DIMENSION 105 x 50 mm
Skinpack Shade Box
5 pieces W 000 335 009 5 W 000 010 915 100 pieces
5 pieces W 000 335 010 6 W 000 010 916 100 pieces
5 pieces W 000 335 011 7 W 000 010 917 100 pieces
5 pieces W 000 335 012 8 W 000 010 918 100 pieces
5 pieces W 000 335 013 9 W 000 010 919 100 pieces
5 pieces W 000 335 014 10 W 000 010 920 100 pieces
5 pieces W 000 335 015 11 W 000 010 921 100 pieces
5 pieces W 000 335 016 12 W 000 010 922 100 pieces
5 pieces W 000 335 017 13 W 000 010 923 100 pieces
DIMENSION 98 x 75 mm
Skinpack Shade Box
5 pieces W 000 335 089 5 W 000 010 939 100 pieces
5 pieces W 000 335 090 6 W 000 010 940 100 pieces
5 pieces W 000 335 091 7 W 000 010 941 100 pieces
5 pieces W 000 335 092 8 W 000 010 942 100 pieces
5 pieces W 000 335 093 9 W 000 010 943 100 pieces
5 pieces W 000 335 094 10 W 000 010 944 100 pieces
5 pieces W 000 335 095 11 W 000 010 945 100 pieces
5 pieces W 000 335 096 12 W 000 010 946 100 pieces
5 pieces W 000 335 097 13 W 000 010 947 100 pieces
DIMENSION 110 x 90 mm
Skinpack Shade Box
5 pieces W 000 335 035 5 W 000 010 927 100 pieces
5 pieces W 000 335 036 6 W 000 010 928 100 pieces
5 pieces W 000 335 037 7 W 000 010 929 100 pieces
5 pieces W 000 335 038 8 W 000 010 930 100 pieces
5 pieces W 000 335 039 9 W 000 010 931 100 pieces
5 pieces W 000 335 040 10 W 000 010 932 100 pieces
5 pieces W 000 335 041 11 W 000 010 933 100 pieces
5 pieces W 000 335 042 12 W 000 010 934 100 pieces
5 pieces W 000 335 043 13 W 000 010 935 100 pieces
DIMENSION 108 x 51 mm
Skinpack Shade Box
5 pieces W 000 335 047 5 W 000 010 951 100 pieces
5 pieces W 000 335 048 6 W 000 010 952 100 pieces
5 pieces W 000 335 049 7 W 000 010 953 100 pieces
5 pieces W 000 335 050 8 W 000 010 954 100 pieces
5 pieces W 000 335 051 9 W 000 010 955 100 pieces
5 pieces W 000 335 052 10 W 000 010 956 100 pieces
5 pieces W 000 335 053 11 W 000 010 957 100 pieces
5 pieces W 000 335 054 12 W 000 010 958 100 pieces
5 pieces W 000 335 055 13 W 000 010 959 100 pieces
Shade Skin pack - 10 pieces Box - 100 pieces
5 W 000 335 085 W 000 010 925
6 W 000 335 086 W 000 010 937
7 W 000 335 087 W 000 010 949
8 W 000 335 088 -
Clear - W 000 010 979
Diopter108 x 51 mm
or 105 x 50 mm
+ 1.0 W 000 335 031
+ 1.5 W 000 335 032
+ 2.0 W 000 335 033
+ 2.5 W 000 335 034
� Protection glass or plate CR-39®
� Magnifying glass EN 166
For some precision welding,magnifying the workzone is necessary. These lenses must be usedwith coloured filtering glasses.
The GOLDEN PROTANE® glasses will prove their efficiency in all welding operations where the arc heat causes discomfort.The GOLDEN PROTANE® filter with a gold mirror coating reflects anadditional 90% of the infrared radiation and reduces the amount of heat towhich the eyes are exposed:
• less irritation and therefore less tiredness,• more precision and better quality work,• more comfort and better working conditions.
“Test GOLDEN PROTANE® and weld cool”.
EN 169 - EN 166
EN 166
EN 169 - EN 166
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Gaiters
Technical description • Natural split leather tanned with chromium salts (mineral substances).• The gaiters are manufactured in four pieces that are stitched
together, complete with adjustable leather belt or velcro strap andunder-strap for securing to the shoes.
Protective limits• Due to the presence of the securing straps the gaiters should not be
warn when using machinery with moving or rotating parts, withoutadditional protection.
• The gaiters are not heat resistant and should not be exposed eitherto convective or radiated heat sources.
• The gaiters are not meant for any other type of protection than thatusage describe above. The manufacturer will not be heldresponsible for any damages that could occur from such practices.
Maintenance and storage• Recommended storage: a safe dry well ventilated area that is not
exposed to direct light.• To clean use soap and water to a maximum temperature of 60 °C.• Do not use any type of bleach, dry clean, (perchloride enthymeme)
tumble driers or sharp and abrasive cleaning products.• Maximum 30 wash cycles.
Standards• Gaiters are designed and manufactured to meet
the basic health and safety requirements prescribedby EEC directive 89/686 of Decree Law 475/92and to comply with the requirements prescribed byEN 340 Standards, relating to general requirements,and EN 470 standards relating to protective equipmentfor welders and similar activities.
• When worn correctly the gaiters do not impede normal weldingactivities, quality and performance guaranteed if correctly wornand maintained according to the instructions supplied. Protectioncategory II (in accordance with Decree Law 475/92)
Gaiters are used to protectthe bottom of the trousersand shoes from sparks and heat generated duringwelding or grindingoperations.
Cat N°: W 000 010 590
Cat N°: W 000 010 591
1198
-38
Leather belt
Velcro belt
EN 340EN 470
Leather clothes
8-19
Reminder:EEC directive 89/686 is mandatory with thecompliance to EN 340 and EN 470-1 standards forwelder's protective equipment.
For the WELDLINE garments,only the best quality leather
is selected by our expert.
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Short and long sleeves
Technical description • Entirely in split leather tanned with chromium salts (mineral substances)• Fixed with leather straps • Tightening elastic to the wrists• Single size
Protective limits• Due to the presence of the securing straps the sleeves should not be
worn when using machinery with moving or rotating parts, withoutadditional protection.
• The sleeves are not heat resistant and should not be exposed either toconvective or radiated heat sources.
• The sleeves are not meant for any other type of protection than thatusage describe above. The manufacturer will not be held responsiblefor any damages that could occur from such practices.
Maintenance and storage• Recommended storage: a safe dry well ventilated area that is not
exposed to direct light• To clean use soap and water to a maximum temperature of
60 °C • Do not use any type of bleach, dry clean, (perchloride enthymeme)
tumble driers or sharp and abrasive cleaning products• Maximum 30 wash cycles
Standards• These welder sleeves constitute an EAR category 2• These sleeves were designed to comply with the following
European standards:� EN 340: Protective clothing - General requirements� EN 470-1: Protective clothing used during welding and relatedprocess
� Mechanical tests:- thickness: conform- dimensional variation: conform- breaking strength: conform- tensile strength: conform
� Chemical tests:- fat content rate: conform
� Thermal tests:- inflammability: conform- withdrawal to heat - behavioural contact with small spatter: conform
• These sleeves have been examined by competent CE organisation.• The CE marking confirms they meet the essential requirements
or the European Directive 89/686 relating to individual protectionequipment.
The short and long sleeves in splitleather are intended to protect armsfrom fine welding spatters.
Cat N°: W 000 010 592
2005
-127
Cat N°: W 000 010 593
2005
-128
Length: +/- 450 mm
Length: +/- 670 mm
EN 340EN 470-1
8-20
8W
ELD
ER
PR
OT
EC
TIO
N
1 100 x 800 mm• Length: 1 100 mm• Width: 800 mm
Grain leather apron
Technical description • Protective welding apron in premium grade grain leather tanned
with chromium salts (mineral substances).• Leather strap fixed through bound eyelets to the waist and flap.• Single size.
Protective limits• Due to the presence of the securing straps the apron should not
be warn when using machinery with moving or rotating parts,without additional protection.
• The apron is not heat resistant and should not be exposed eitherto convective or radiated heat sources.
• The apron is not meant for any other type of protection than thatusage describe above. The manufacturer will not be heldresponsible for any damages that could occur from suchpractices.
Maintenance and storage• Recommended storage: a safe dry well ventilated area that is not
exposed to direct light.• To clean use soap and water to a maximum temperature of 60 °C.• Do not use any type of bleach, dry clean, (perchloride enthymeme)
tumble driers or sharp and abrasive cleaning products.• Maximum 30 wash cycles.
Standards• This welding apron is an EAR category 2• This apron was designed to comply with the following European
standards:� EN 340: Protective clothing - General requirements� EN 470-1: Protective clothing used during welding and relatedprocess
� Mechanical tests:- thickness: conform- dimensional variation: conform- breaking strength: conform- tensile strength: conform
� Chemical tests:- fat content rate: conform
� Thermal tests:- inflammability: conform- withdrawal to heat- behavioural contact with small spatter: conform
• These aprons have been examined by competent CEorganisation.
• The CE marking confirms they meet the essential requirementsor the European Directive 89/686 relating to individual protectionequipment.
This apron is designed to protect clothesfrom welding spatters and grindingparticles.
Cat N°: W 000 010 588
0951
-30
EN 340EN 470-1
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY8-21
Leather strap
900 x 600 mm
Cat N°: W 000 010 586
Cat N°: W 000 010 585
Cat N°: W 000 010 589
Leather straps, closing by clips
Cotton straps
Cotton straps vegetable tanning:Without chromium salts
Cat N°: W 000 010 587
1 100 x 800 mm
Split leather apron
Technical description • Protective welding apron in premium grade split leather tanned
with chromium salts (mineral substances), except W 000 010 589• Leather or cotton strap with quick release clips to the waist and flap
Protective limits• Due to the presence of the securing straps the apron should not be
warn when using machinery with moving or rotating parts, without additional protection.
• The apron is not heat resistant and should not be exposed eitherto convective or radiated heat sources
• The apron is not meant for any other type of protection than thatusage describe above. The manufacturer will not be held responsiblefor any damages that could occur from such practices
Maintenance and storage• Recommended storage: a safe dry well ventilated area that is not
exposed to direct light• To clean use soap and water to a maximum temperature
of 60 °C • Do not use any type of bleach, dry clean, (perchloride enthymeme)
tumble driers or sharp and abrasive cleaning products• Maximum 30 wash cycles
• Length: 900 mm• Width: 600 mm
• Length: 1 100 mm• Width: 800 mm
This apron is designed to protect clothes fromwelding spatter and grinding particles.
Standards• This welding apron is an EAR category 2• This apron was designed to comply with the following European
standards:� EN 340: Protective clothing - General requirements� EN 470-1: Protective clothing used during welding and relatedprocess
� Mechanical tests:- thickness: conform- dimensional variation: conform- breaking strength: conform- tensile strength: conform
� Chemical tests:- fat content rate: conform
� Thermal tests:- inflammability: conform- withdrawal to heat- behavioural contact with small spatter: conform
• These aprons have been examined by competent CE organisation.• The CE marking confirms they meet the essential requirements
or the European Directive 89/686 relating to individual protectionequipment.
Closing byclips or cottonstraps
2002
-051
EN 340EN 470-1
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY 8-22
8W
ELD
ER
’SP
RO
TE
CT
ION
Leather straps, closing by clips
2002
-050
Split leather welding jacket
Technical description• The complete jackets been manufactured in premium grade
split leather tanned with chromium salts (mineral substances)• The jacket fastens to the front with an overlap of leather and
Velcro for additional protection against spatter, the inner neckbeen of double cotton for comfort
• Tightening elastic to the wrists• Finished in red trim• Length: +/- 780 mm• Sizes available: XL and XXL (other sizes on application)
Protective limits• The jackets are not heat resistant and should not be exposed
either to convective or radiated heat sources.• The jackets are not meant for any other type of protection than
that usage describe above. The manufacturer will not be heldresponsible for any damages that could occur from suchpractices
Maintenance and storage• Recommended storage: a safe dry well ventilated area that is not
exposed to direct light• To clean use soap and water to a maximum temperature of 60 °C • Do not use any type of bleach, dry clean, (perchloride
enthymeme) tumble driers or sharp and abrasivecleaning products
• Maximum 30 wash cycles
These jackets are designed to protectthe upper body of the user from finewelding spatter and grinding particles.
Cat N°: (Size XL): W 000 010 594 Cat N°: (Size XXL): W 000 010 595
2005
-158
Standards• These welding jackets are an EAR category 2 • These jackets are designed to comply with the following
European standards:� EN 340: Protective clothing - General requirements� EN 470-1: Protective clothing used during welding and relatedprocess
� Mechanical tests:- thickness: conform- dimensional variation: conform- breaking strength: conform- tensile strength: conform
� Chemical tests:- fat content rate: conform
� Thermal tests:- inflammability: conform- withdrawal to heat- behavioural contact with small spatter: conform
• These jackets have been examined by competent CEorganisation.
• The CE marking confirms they meet the essential requirementsor the European Directive 89/686 relating to individual protectionequipment.
EN 340EN 470-1
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY8-23
These jackets are designedto protect the upper body ofthe user from fine weldingspatters and grinding particles.The design giving a light,breathable, flexible andcomfortable jacket.
Technical description• The complete jackets been manufactured in premium grade grain
leather tanned with chromium salts (mineral substances)• Half of the back be made from flame retardant cotton ensuring a
light, flexible Jacket• The jacket fastens to the front with an overlap of leather and
Velcro for additional protection against spatter, the inner neckbeen of double cotton for comfort
• Tightening elastic to the wrists• Finished in red trim• Length: +/- 780 mm• Sizes available: XL and XXL (other sizes on application)
Protective limits• The jackets are not heat resistant and should not be exposed
either to convective or radiated heat sources.• The jackets are not meant for any other type of protection than
that usage describe above. The manufacturer will not be heldresponsible for any damages that could occur from such practices
Maintenance and storage• Recommended storage: a safe dry well ventilated area that is not
exposed to direct light• To clean use soap and water to a maximum temperature of 60 °C• Do not use any type of bleach, dry clean, (perchloride enthymeme)
tumble driers or sharp and abrasive cleaning products• Maximum 30 wash cycles
Standards• These welding jackets are an EAR category 2• These jackets are designed to comply with the following European
standards:� EN 340: Protective clothing - General requirements� EN 470-1: Protective clothing used during welding and relatedprocess
� Mechanical tests:- thickness: conform- dimensional variation: conform- breaking strength: conform- tensile strength: conform
� Chemical tests:- fat content rate: conform
� Thermal tests:- inflammability: conform- withdrawal to heat- behavioural contact with small spatter: conform
• These Jackets have been examined by competent CE organisation. • The CE marking confirms they meet the essential requirements
or the European Directive 89/686 relatingto individual protection equipment.
Cat N°: (Size XL):W 000 010 596 Cat N°: (Size XXL): W 000 010 598
2004
-513
2004
-512
EN 340EN 470-1
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY 8-24
8W
ELD
ER
PR
OT
EC
TIO
N
Welding grain leather jacketHalf-back fireproofed cotton
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
GlovesW
ELD
ING
PR
OT
EC
TIO
N
European standard for gloves and welding gloves
Choice criteria Kind of gloves Gloves Normes
LONG BASIC EN 388: 2122
Welding gloves for general purposeLONG BASIC + EN 407: X1XX2X
UNIVERSELEN 388: 2122EN 407: X1XX2X
STOPCALOREN 388: 3133EN 407: 414X4X
Heat resistant welding gloves EN 12477:STOPCALOR + EN 388: 3132
EN 407: 413X4X
EN 12477:STOPCALOR ALU EN 388: 4244
EN 407: 413X4X
TIG welding glovesTIG EN 388: 2111
SENSITIVE EN 407: 41XX4X
DOCKER EN 388: 3132
Protective glovesPROTECT COMFORT EN 388: 2121
PROTECT MECA EN 388: 3122
BASIC EN 388: 2122BASIC + EN 407: X1XX2X
EN 420: general requirements forgloves: safety, comfort, dexterity.- All the gloves meet European standards and carry the
CE marking that indicates conformity to these standards- The pictograms indicate that an approved laboratory has tested
the gloves ensuring they conform to CE.- The welding gloves have to conform to two specific standards
added to the EN 420: the En 388 andthe EN 407.
For each of the criteria, the higher the figure the more efficient theglove is deemed. “X” indicating that a particular glove has not beentested within the criteria.
EN 388: mechanical hazardsA: Abrasion (0-4)B: Blade cut (0-5)C: Tear(0-4)D: Puncture (0-4)
EN 407: heat resistanceA: Flammability (1-4)B: Contact heat (1-4)C: Convective heat (1-4)D: Radiant heat (1-4)E: Small splashes of molten metal (1-4)F: Large splashes of molten metal (1-4)
EN 12477: welding glovesA: Abrasion (0-4)B: Blade cut (0-5)C: Tear (0-4)D: Puncture (0-4)
A: Flammability (1-4)B: Contact heat (1-4)C: Convective heat (1-4)E: Small splashes of molten metal (1-4)
8-25
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Cat N°: W 000 010 413
Welding gloves
Technical description:• American cut with webbed thumb and return on index• Palm and thumb in natural split leather tanned with chromium salts
(mineral substances), thickness 1.2 mm (+/- 0.1 mm)• Reinforcement in split leather of the seams on top of the thumb
and the base of the finger backs• Cuff in natural split leather, length 150 mm (+/- 5 mm) and a
thickness of 1.3 mm• Overall length of the glove: approximately 350 mm (size 10) +/- 5 mm• Seams in para-aramide wire (flame retardant and projectile resistant)• Finished in red edge trim• Size available: 10
Standards and levels of protection:• These gloves have been examined by
a competent CE organisation.• Safety comfort and dexterity level = 5. Limits of protection:
• Do not use for handling objects over 50 °C.• Do not use for handling any chemicals.
Limits of protection:• Do not use for handling objects over 100 °C.• Do not use for handling any chemicals.
LONG BASICThe LONG BASIC welding gloves are designed to protect the handsduring normal welding applications in MMA/MIG/MAG processesand infrequent handling of component parts not exceeding 50 °C.
EN 388
2 1 2 2 X 1 X X 2 X
EN 407
EN 388
2 1 2 2 X 1 X X 2 X
EN 407
Technical description:• American cut with webbed thumb and return on index.• Palm and thumb in natural split leather tanned with chromium salts
(mineral substances), thickness 1.2 mm (+/- 0.1 mm)• Reinforcement of the blue split leather glove for added protection to
the palm thumb and index finger• Reinforcement in grain leather of the seams on top of the thumb
and the base of the finger backs• Cuff in natural split leather, length 150 mm (+/- 5 mm) and a
thickness of 1.3 mm• Overall length of the glove: approximately 350 mm (size 10) +/- 5 mm• Seams in para-aramide wire (flame retardant and projectile resistant)• Finished in red edge trim• Size available: 10
Standards and levels of protection:• These gloves have been examined by
a competent CE organisation.• Safety comfort and dexterity level = 5.
Cat N°: W 000 010 414
2004-712
LONG BASIC +The LONG BASIC + welding gloves are designed to protectthe hands during normal welding applications in MMA/MIG/MAGprocesses and infrequent handling of componentparts not exceeding 100 °C.
EN 420EN 388EN 407
EN 420EN 388EN 407
2005-275
8-26
8W
ELD
ER
PR
OT
EC
TIO
N
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Welding gloves
Limits of protection:• Do not use for handling objects over 50 °C.• Do not use for handling any chemicals.
Technical description:• American cut with webbed thumb and return on index• Palm index finger and inner of the thumb in natural grain leather for
extra sensitivity• Reinforcement in grain leather of the seams on top of the thumb
and the base of the finger backs• Glove rear and cuff been made of natural split leather, length 150
mm (+/- 5 mm) and a thickness of 1.3 mm• Artery protection in grain leather• Overall length of the glove: approximately 350 mm (size 10) +/- 5 mm • Seams in para-aramide wire (flame retardant and projectile resistant)• Finished in red edge trim • Size available: 10
Standards and levels of protection:• These gloves have been examined by
a competent CE organisation.• Safety comfort and dexterity level = 5.
UNIVERSELThe UNIVERSEL welding gloves are designed to protect the handsduring normal welding applications in MMA/MIG/MAG/TIG processesand have a grain leather palm for extra sensitivity.
EN 388
2 1 2 2 X 1 X X 2 X
EN 407
Cat N°: W 000 010 417
2004
-705
EN 420EN 388EN 407
Limits of protection:• Do not use for handling objects over 100 °C.• Do not use for handling any chemicals.
Technical description:• American cut with webbed thumb• In split leather red colour the glove is flame retardant treated and
1.3 mm thick (+/- 0.2 mm)• Seams in para-aramide wire (flame retardant and projectile
resistant) and reinforced by split leather• Back being one complete piece• Cuff of 145 mm (+/- 5 mm) with doubled fabric• Overall length of the glove: approximately 350 mm (size 10)
(+/- 5 mm)• Size available: 10
Standards and levels of protection:• These gloves have been examined by
a competent CE organisation.• Safety comfort and dexterity level = 5.
STOPCALORThe STOPCALOR welding gloves are designed for a highlevel of protection for the hands during normal weldingapplications in MMA/MIG/MAG processes and handlingof component parts not exceeding 100 °C.
EN 388
3 1 3 3 4 1 4 X 4 X
EN 407
Cat N°: W 000 010 418
EN 420EN 388EN 407
8-27
2004-515
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Cat N°: W 000 010 419
Cat N°: W 000 010 420
Welding gloves
Technical description:• American cut with webbed thumb• Glove back and cuff in blue colour split leather 1.2 mm thick (+/- 0.2 mm)• Palm in natural grain leather tanned with chromium salts (mineralsubstances) for extra flexibility• Seams in cotton wire • Back being one complete piece• Cuff of 145 mm (+/- 5 mm) with doubled fabric• Overall length of the glove: approximately 350 mm (size 10) +/- 5 mm • Size available: 10
Standards and levels of protection:• These gloves have been examined by
a competent CE organisation.• Safety comfort and dexterity level = 3.
STOPCALOR +The STOPCALOR + welding gloves are designedfor a high level of protection for the hands during normalwelding applications in MMA/MIG/MAG processes andhandling of component parts not exceeding 100 °C.The natural grain leather palm giving extra sensitivity.
EN 388
3 1 3 2 4 1 3 X 4 X
EN 407Limits of protection:• Do not use for handling objects over 100 °C.• Do not use for handling any chemicals.
Technical description:• American cut with webbed thumb• Palm in red split leather flame retardant treated and double
stitched in cotton• Inside cuff in natural split leather and double stitched in cotton• Outside cuff and back of hand in one single piece of Kevlar fabric
with one scraped face and one aluminised face. Doubled stitchedwith cotton reinforced with aluminised fabric
• Seams in para-aramide wire (flame retardant and projectile resistant)and reinforced by split leather
• Cuff of 145 mm (+/- 5 mm) with doubled fabric• Overall length of the glove: approximately 355 mm (size 10) (+/- 5 mm)• Finished in red edge trim• Size available: 10
Standards and levelsof protection:• These gloves have been examined by
a competent CE organisation.• Safety comfort and dexterity level = 3.
STOPCALOR ALUThe STOPCALOR ALU welding gloves are designed fora high level of protection for the hands during heavywelding applications in MIG/MAG processes andhandling of component parts not exceeding 100 °C.
Limits of protection:• Do not use for handling objects over 100 °C.• Do not use for handling any chemicals.
EN 388
4 2 4 4 4 1 3 X 4 X
EN 407
EN 420EN 12 477 A
Requirement ENPerformances
Required Tests Models Standard
Abrasion resistance 2 - (500 cycles) 3 (2 700 cycles)
Resistance to the cut by cutting 1 - (Index 1.2) 1 (Index 2.6)
Tear strengthEN 388
2 - (25 N) 3 (64 N)
Perforating strength 2 - (60 N) 2 (82 N)
Behaviour with the flame EN 407 3 - (5 S) 4 (0 S)
Heat strength of contact EN 407EN 702 1 - (100 °C) 1 (100 °C)
Resistance with convective heat EN 407EN 367 2 - (HT1 24 ≥ 7) 3 (HT1 24 ≥ 15)
Behaviour with small EN 407molten metal projections EN 348 3 - (25 drops) 4 (> 40 drops)
Dexterity EN 420 1 - Ø 11mm 3 - Ø 8 mm
0951-25
8-28
8W
ELD
ER
PR
OT
EC
TIO
N
2004
-958
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Cat N°: W 000 010 428 (Size 10)
Welding gloves
Technical description:• American cut with webbed thumb and return on index finger• Complete hand in natural grain leather tanned with chromium salts(mineral substances)• Cuff in natural split leather• Cuff 145 mm (+/- 5 mm) • Seams in para-aramide wire (flame retardant and projectile resistant)
and reinforced by split leather• Overall length of the glove: approximately 360 mm (size 10) (+/- 5 mm)• Finished in red edge trim• Size available: 9 and 10
Standards and levels of protection:• These gloves have been examined by
a competent CE organisation.• Safety comfort and dexterity level = 5
Limits of protection:• Do not use for handling objects over 100 °C.• Do not use for handling any chemicals.
TIGThe TIG welding gloves are designed to give a high level of dexterityand flexibility for normal welding applications in TIG/Flame processes.
EN 388
2 1 1 1 4 1 X X 4 X
EN 407
Technical description:• American cut with webbed thumb • Complete hand in natural grain leather tanned with chromium salts(mineral substances)• Cuff in natural split leather• Cuff 145 mm (+/- 5 mm)• Seams in cotton wire• Overall length of the glove: approximately 350 mm (size 10) (+/- 5 mm)• Size available: 10
Standards and levels of protection:• These gloves have been examined by
a competent CE organisation.• Safety comfort and dexterity level = 5
Limits of protection:• Exclusively for use in minor risk situations.• Do not use for handling any chemicals.
SENSITIVEWelding gloves with a new good dexterity level.
The SENSITIVE gloves have beendesigned to give excellent flexibilitywith good dexterity level.
Cat N°: W 000 010 421 (Size 9)Cat N°: W 000 010 422 (Size 10)
2004-971
EN 388EN 407
2004-963
8-29
EN 388
2 1 1 1 4 1 X X 4 X
EN 407
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Cat N°: W 000 010 427
Protective gloves
Technical description:• DOCKER protective handling gloves• Palm and mitres in grain leather• Cotton back• Fabric cuff• Elastic tightening glove back
Standards and levels of protection:• These gloves have been examined by
a competent CE organisation.• Safety comfort and dexterity level = 5.
Limits of protection:• For use in a dry environment against mechanical risks.
DOCKERThe DOCKER protective gloves are designed to a high quality with reinforced fingers for anincreased life span.
EN 388
3 1 3 2
Technical description:• American cut with webbed thumb and return on index finger• Complete hand in natural grain leather tanned with
chromium salts (mineral substances), 1 mm (+/- 0.1 mm) thick• Elastic tightening at the wrist of the glove back• Seams in cotton wire reinforced by leather to the thumb
top and the base at the back of the fingers • Overall length of the glove: approximately 265 mm (size 10) +/- 5 mm• Finished in red edge trim• Size available: 9 and 10
Standards and levels of protection:• These gloves have been examined by
a competent CE organisation.• Safety comfort and dexterity level = 5.
Limits of protection:• Do not use for handling objects over 50 °C.• Do not use for handling any chemicals.
PROTECT COMFORTThe PROTECT COMFORT gloves havebeen designed to be comfortable anflexible with an excellent dexterity.
EN 388
2 1 2 1
Cat N°: W 000 010 425 (Size 9)Cat N°: W 000 010 426 (Size 10)
EN 388
EN 388
2004
9-00
7
2004-708
8-30
8W
ELD
ER
PR
OT
EC
TIO
N
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Protective gloves
Technical description:• American cut with webbed thumb. • Complete hand in natural split leather tanned with chromium salts(mineral substances)• Elastic tightening at the wrist of the glove back• Seams in cotton wire reinforced by leather to the thumb top and the
base at the back of the fingers• Overall length of the glove: approximately 265 mm (size 10) (+/- 5 mm)• Finished in red edge trim• Size available: 9 and 10
Standards and levels of protection:• These gloves have been examined by
a competent CE organisation.• Safety comfort and dexterity level = 5.
Limits of protection:• Do not use for handling objects over 50 °C.• Do not use for handling any chemicals.
PROTECT MECAThe PROTECT MECA gloves have been designedto provide a good level of protection whilst workingin a dry environment.
EN 388
3 1 2 2
Cat N°: W 000 010 423 (Size 9)Cat N°: W 000 010 424 (Size 10)
EN 388
Technical description:• American cut with webbed thumb and return on index finger.• Palm and thumb in natural split leather tanned with chromium salts
(mineral substances),1.2 mm (+/- 0.1 mm) thick
• Reinforced with leather on the seams to the thumb top and the baseat the back of the fingers
• Seams in para-aramide wire (flame retardant and projectile resistant)• Finished in red edge trim• Size available: 10
Standards and levels of protection:• These gloves have been examined by
a competent CE organisation.• Safety comfort and dexterity level = 5.
BASICThe BASIC gloves have been designed to provide a goodquality glove at an affordable price.
EN 388
2 1 2 2 X 1 X X 2 X
EN 407
EN 388EN 407
Cat N°: W 000 010 415Limits of protection:• Do not use for handling objects over 50 °C.• Do not use for handling any chemicals.
2004-702
2004-711
8-31
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Cat N°: W 000 335 162
Cat N°: W 000 010 416
Protective gloves
Accessories
Technical description:• American cut with webbed thumb and return on index finger. • Palm and thumb in natural split leather tanned with chromium
salts (mineral substances), 1.2 mm (+/- 0.1 mm) thick• Reinforcement in blue split leather for added protection
to the palm thumb and index finger• Reinforced with leather on the seams to the thumb top
and the base at the back of the fingers • Seams in para-aramide wire (flame retardant and
projectile resistant) • Finished in red edge trim • Size available: 10
Standards and levels of protection:• These gloves have been examined by
a competent CE organisation.• Safety comfort and dexterity level = 5.
BASIC +The BASIC + gloves have been designed to provide a good quality comfortable glove with a reinforced palm for increased protection.
• Dimensions 200 x 150 mm.
• Fitted with two elastic straps at palm and cuff level.
• Split leather lined with Kevlar. Heat and flame resistant.
• One aluminized side reflects 95% of radiant heat.
• Double Kevlar thread seams.
• Delivered by 2 pieces.
EN 388
2 1 2 2 X 1 X X 2 X
EN 407
EN 388EN 407
EN 532
Limits of protection:• Do not use for handling objects over 50 °C.• Do not use for handling any chemicals.
8-32
8W
ELD
ER
PR
OT
EC
TIO
N
Thermal screenMIG/MAG and MMA welding processes.Thermal protection added to a glove.
2004
-961
1198
-65
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
WELDCOT protective clothings are designed in accordance withCE guideline 89/686/EEC, and with European standards EN 340, EN 531and EN 470-1.
Purpose of the clothingFlame retardant protective clothing produced to this standard does notspread flame when accidentally contacted with an igniting flame. Itprotects the part of the skin covered by the clothing of the weareragainst flash fire and small drops of molten metal from welding or cuttingoperations.In addition, the clothing should protect the wearer against the effects ofradiant and convective heat.
SpecificationsThe clothing should meet the requirements of the standards listedbelow. These standards are part of EN 531(Protective clothing againstindustrial heat) and are used to determine the specification. Theclothing also meets the requirements of the EN 470-1 standard(protective clothing for welders).
Standards Possible levels Specification Description
EN 532 One (A) A Limited flame spread
EN 367 B1 to B5 B1 Convective heat
EN 366 C1 to C4 C1 Radiant heat
EN 373 E1 to E3 E1 Molten iron splash
Cotton clothes
JACKET
TROUSERS
8-33
B
A
C
Size A B C44 170-176 84-88 72-7646 170-176 88-92 76-8048 176-182 92-96 80-8450 176-182 96-100 84-8852 176-182 100-104 88-9254 182-188 104-108 92-9656 182-188 108-112 96-10058 182-188 112-116 100-10460 188-194 116-120 104-10862 188-194 120-124 108-11264 188-194 124-128 112-116
S 170-182 88-96 76-84M 176-182 96-104 84-92L 182-188 104-112 92-100
XL 182-194 112-120 100-108XXL 188-194 120-128 108-116
Without
Azocolourants
(European directive
2002/61/CE)
2008
-147
WELDCOT:a full range of cotton PYROVATEX® flame-retardant clothes
Responsible
textile production
DUNGAREES
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
COAT
HOOD
OVERALL
EN 531A - B - C1EN 470-1
Cotton clothes
Size TROUSERS JACKET OVERALL DUNGAREES COAT HOOD
S W 000 261 469 W 000 261 474 W 000 261 479 W 000 261 484 W 000 261 489 W 000 261 499
M W 000 261 470 W 000 261 475 W 000 261 480 W 000 261 485 W 000 261 490 W 000 261 500
L W 000 261 471 W 000 261 476 W 000 261 481 W 000 261 486 W 000 261 491 W 000 261 501
XL W 000 261 472 W 000 261 477 W 000 261 482 W 000 261 487 W 000 261 492 -
XXL W 000 261 473 W 000 261 478 W 000 261 483 W 000 261 488 W 000 261 493 -
EN 340EN 531
EN 470-1
8-34
8W
ELD
ER
PR
OT
EC
TIO
N
Without
Azocolourants
(European directive
2002/61/CE)20
08-1
51
2008
-149
2008
-150
2008
-152
Responsible
textile production
S1P
S3
Safety shoes• To be defined as a safety shoes,
they have to include a toe protection.
• The European directive 89/686/EECrecommends the wearing of safetyshoes for workers.
• The standard EN ISO 20345 includes several levels.
Safety Toe Shock Antistatic Anti-puncture Waterlevel protection absorber plate plate resistant
SB �S1 � � �S2 � � � �
S1P � � � �S3 � � � � �
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Safety shoes
8-35
High
Steel Steel
SteelSteel
PENTATHLON WL
RUGBY WL
OXYGEN WL
GOLF WL
Split leather,with waterresistanttreatment
Pigmentedsplit
leather
Suedesplit
leather
Low
High
Low
Safety Upper Toe Anti
level Type material protection puncture Modelplate
CLASSIC WL range
It is now possible to replace the steel toeby a composite one and the steel plateby a fibre one.
Main benefits for the users are flexibilityand weight.
All the products of the TOP Weldline range havea toe protection in composite and antipunctureplate in fibre.
The criteria of choice are:1) Levels of protection as indicated here above
2) Hight or low shoes
3) Upper in:- grain leather (water resistant)- split leather- fabric (non water resistant)- pigmented split leather
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Shoes
8-36
8W
ELD
ER
PR
OT
EC
TIO
N
TOP WL range
S1P
S3
High
Composite Fibre
FibreComposite
PENTATHLON TOP WL 2
RUGBY TOP WL 2
BASKET TOP WL
FOOTING TOP WL
Split leather,with waterresistanttreatment
Suedesplit
leather
Low
High
Low
Safety Upper Toe Anti
level Type material protection puncture Modelplate
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
TOP WL rangeThese models are built with innovative material.Toe protection in composite and antipuncture plate in fibre,bring an optimal foot comfort.
Size Cat N°39 W 000 266 86840 W 000 266 86941 W 000 266 87042 W 000 266 87143 W 000 266 87244 W 000 266 87345 W 000 266 87446 W 000 266 87547 W 000 266 876
2007
-882
BASKET TOP WL: S1PHigh shoe in suede split leather.Suitable for those who work in dry environmentswith high risks for electrocution and electrostatic
shocks.• Outer fabric in 100% polyester of high resistance.
• Inner fabric lining: transpiring, antibacterial, insulating, absorbent,abrasion resistant. Slip-resistant, shock-resistant and anti-static sole.
• Toe protection in composite as resistant as steel.
• Antipuncture plate in fibre as resistantas steel but showing a better
flexibility that bringsa better foot comfort.
Size Cat N°39 W 000 266 86840 W 000 266 86941 W 000 266 87042 W 000 266 87143 W 000 266 87244 W 000 266 87345 W 000 266 87446 W 000 266 87547 W 000 266 876
FOOTING TOP WL: S1PSuede split leather protection shoe. Suitable for those who work in dry environments withhigh risks for electrocution and electrostatic shocks.
• Outer fabric in 100% polyester of high resistance.
• Inner fabric lining: transpiring,antibacterial, insulating,absorbent, abrasionresistant. Slip-resistant,shock-resistant andanti-static sole.
• Toe protection in compositeas resistant as steel.
• Antipuncture plate in fibreas resistant as steel butshowing a better flexibilitybrings a better footcomfort.
Size Cat N°39 W 000 266 85740 W 000 266 85941 W 000 266 86142 W 000 266 86243 W 000 266 86344 W 000 266 86545 W 000 266 86646 W 000 266 86447 W 000 266 867
2007
-881
8-37
Toe protection Shock absorber Water resistance
Antipuncture plate Antisliding sole
Spatters resistance
Flexible sole
Abrasion resistant sole
Hydrocarbons resistanceAntistatic
Pictograms significations:
TOP WL range
8-38
8W
ELD
ER
PR
OT
EC
TIO
N
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Toe protection Shock absorber Water resistance
Antipuncture plate Antisliding sole
Spatters resistance
Flexible sole
Abrasion resistant sole
Hydrocarbons resistanceAntistatic
Pictograms significations:
Chaussure haute, souple et confortable en cuir fleur.Particulièrement recommandée pour l’industriemécanique et la construction. Convient pour les travaux en milieu ambianthumide ou en présence d’hydrocarbures.
• Coque de protection en matériau composite.
• Semelle anti perforation en fibre synthétique aussirésistante que l’acier mais avec une extrêmesouplesse qui procure un confort optimal.
• Doublure interne respirante et résistante à l’abrasion.
• L’absence de métal permet un passage des détecteurs de métaux sans difficulté (aéroports, boutiques,…).
RUGBY TOP WL 2 : S3Chaussure haute, souple et confortable en cuir fleur.Particulièrement recommandée pour l’industriemécanique et la construction. Convient pour les travaux en milieu ambianthumide ou en présence d’hydrocarbures.
• Coque de protection en matériau composite.
• Semelle anti perforation en fibre synthétique aussirésistante que l’acier mais avec une extrêmesouplesse qui procure un confort optimal.
• Doublure interne respirante et résistante à l’abrasion.
• L’absence de métal permet un passage des détecteurs de métaux sans difficulté (aéroports,boutiques,…).
Size Cat N°
39 W 000 272 638
40 W 000 272 639
41 W 000 272 640
42 W 000 272 641
43 W 000 272 642
44 W 000 272 643
45 W 000 272 644
46 W 000 272 645
47 W 000 272 646
2008
-752
Size Cat N°39 W 000 272 54140 W 000 272 54241 W 000 272 54342 W 000 272 54443 W 000 272 54544 W 000 272 54645 W 000 272 54746 W 000 272 54947 W 000 272 550
2008
-751
PENTATHLON TOP WL 2 : S3
New
Specific forwelding activities
High boot in pigmented split leather. With metatarsal protection against sparks and
droplets produced during welding and cutting. • Inner fabric lining: transpiring, antibacterial and abrasion resistant.
• Slip-resistant, shock-resistant and anti-static sole.Resists contact heat up to 200°C.
• Toe protection in steel.
• Antipuncture protectionplate in steel.
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
CLASSIC WL range Classic models with toe protection in steeland (where specified) antipuncture plate in steel.
OXYGEN WL HRO 200°: S1PSize Cat N°39 W 000 266 75440 W 000 266 78841 W 000 266 78942 W 000 266 79043 W 000 266 79144 W 000 266 79245 W 000 266 79346 W 000 266 79447 W 000 266 795
2007
-874
PENTATHLON WL: S3High shoe, soft and comfortable, grain leather.
Suitable for those who work in dampenvironments and/or in the presenceof hydrocarbons.
• Water-repellent.
• With ankleprotection padding.
• Inner lining: transpiring, antibacterial, abrasion resistant.
• Slip resistant, shockresistant and antistatic sole.
• Toe protection in steel.
• Antipuncture plate in steel.
Size Cat N°39 W 000 266 81440 W 000 266 81541 W 000 266 81642 W 000 266 81743 W 000 266 81844 W 000 266 81945 W 000 266 82146 W 000 266 82447 W 000 266 825
2007
-872
8-39
Toe protection Shock absorber Water resistance
Antipuncture plate Antisliding sole
Spatters resistance
Flexible sole
Abrasion resistant sole
Hydrocarbons resistanceAntistatic
Pictograms significations:
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
CLASSIC WL range
RUGBY WL: S3Low shoe, soft and comfortable in grain leather.Suitable for those who work in dampenvironments and/or in the presenceof hydrocarbons.• Water-repellent.
• With ankleprotection padding.
• Inner lining: transpiring, antibacterial, abrasion resistant.
• Slip resistant, shockresistant and antistatic sole.
• Toe protection in steel.
• Antipuncture plate in steel.
Size Cat N°39 W 000 266 79640 W 000 266 75541 W 000 266 79742 W 000 266 79943 W 000 266 80144 W 000 266 80045 W 000 266 80246 W 000 266 80347 W 000 266 804
2007
-873
8-40
8W
ELD
ER
PR
OT
EC
TIO
N
GOLF WL: S1PLow safety shoe in suede split and perforated leather for increasedrespiration of the feet.Suitable for those who work in dry environments with high risks forelectrocution and electrostatic shocks.
• Inner fabric lining: transpiring, antibacterial, absorbent andabrasion-resistant.
• Slip-resistant, shock-resistant and antistatic sole.
• Toe protection in steel.
• Antipuncture splate in steel.
Size Cat N°39 W 000 266 75640 W 000 266 78041 W 000 266 78142 W 000 266 78243 W 000 266 78344 W 000 266 78445 W 000 266 78546 W 000 266 78647 W 000 266 787
2007
-875
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY8-41
9 - Shop protective products
PROFESSIONAL WELDING PRODUCTS BYWELDLINE is an Air Liquide Welding trademark
9SH
OP P
ROTE
CTIV
EPR
ODUC
TS
• Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
• Protection strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 to 9-4
• Curtains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5
• Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6 to 9-7
• Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8
• Accessories (for curtains and strips) . . . . . . . . . . . . . . . . . 9-9 to 9-12
• Curtains and heat resistant fabrics . . . . . . . 9-13 to 9-15
• Sound insulating walls and elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16 to 9-19
• Welding tents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-20
9-1
PROTECTLITE
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
� Air Liquide Welding has an International competence in welding andrelated equipment. Our proposal is to offer a global and professionalsolution to an efficient and safe working environment.
� PROTECTLITE is a wide range of products covering all the needs ofyour environment:
- Welding strips, grinding strips or protection strips against dust orcold,
- Curtains and fixed or mobile screens, joining screens for weldingand grinding,
- A professional range of heat resistant fabrics,
- All the useful spares to create your specific booths,
- Standard elements and separation walls with sound insulatingfunction "PROPHONIC" range.
Air Liquide Welding strives to supply its customers with productsthat are safe and comply with all applicable European standards.
Protection strips, curtains, heatresistant fabrics, portable screens,accessories for curtains, stripsand sound insulation.
Technical data: light transmissionthrough weldingcurtains or strips.
Remarks:
All the weldingcurtains and strips
Orange CE,Green S6,
or Green S9,are in accordancewith the EN 1598
standard.Clear curtains must not beused for welding protection.
0
200 400 600 800 1000
10
20
30
40
50
60
70
80
90
100
% of lighttransmission
U.V. Blue light Visible light Infrared
Waves length in nanometre
Orange CE
Green S6
Green S9
Weldingcurve
9-2Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Protection strips
These strips are manufactured in accordancewith the EN 1598 standard.
Flame proof strips come in different colours:
Orange CE Green S6 Green S9
They can be delivered either full rolls (50 meters) or cut andpunched to any length.
The choice of the colour will depend on the kind of weldingprocess concerned.
Generally a clear colour is convenient for brazing, flame weldingand low amperage welding. The lighting of the workspace will beimproved.
The green S9 is designed for high amperage welding and/orspecial application like aluminium MIG welding, SPRAY ARC andPULSED ARC.
Welding protection strips
9SH
OP P
ROTE
CTIV
EPR
ODUC
TS
Overlap of 66 %:
• width of the strips 300 mm,• fully screen due to a wide overlap,• efficiency against cold and very good mechanical
resistance.
Number of hooks is equal to number of strips + 1
Nb = L – 100 Nb: number of strips
200 L: required length in mm
If Nb < x,5 so Nb = x
If Nb > x,5 so Nb = x+1
Ex: Nb = 10,6 allow 11 strips
First case, first and last strip will have a lower overlapSecond case first and last will have a wider overlap
Strips with an overlap
W 000 010 238
Overlap of 33 %:
• width of the strips 300 mm,• mainly used if strips are frequently overpass.
Number of hooks is equal to number of strips + 1Number of rings is equal to number of strips - 1
Nb = L – 50 Nb: number of strips
250 L: required length in mm
If Nb < x,5 so Nb = x
If Nb > x,5 so Nb = x+1
First case, first and last strip will have a lower overlapSecond case first and last will have a wider overlap
Nota: don’t forget the intermediate ring
W 000 010 238 W 000 010 237
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Protection strips
Number Overlap in mmof strips 66 % 33 %
1 300 3002 500 5503 700 8004 900 1 0505 1 100 1 3006 1 300 1 5507 1 500 1 8008 1 700 2 0509 1 900 2 30010 2 100 2 55011 2 300 2 80012 2 500 3 050
Number Overlap in mmof strips 66 % 33 %
13 2 700 3 30014 2 900 3 55015 3 100 3 80016 3 300 4 05017 3 500 4 30018 3 700 4 55019 3 900 4 80020 4 100 5 05021 4 300 5 30022 4 500 5 55023 4 700 5 80024 4 900 6 050
Number Overlap in mmof strips 66 % 33 %
25 5 100 6 30026 5 300 6 55027 5 500 6 80028 5 700 7 05029 5 900 7 30030 6 100 7 55031 6 300 7 80032 6 500 8 05033 6 700 8 30034 6 900 8 55035 7 100 8 80036 7 300 9 050
Selection number of 300 mm strips
Mounting and hanging of 300 mm strips
Different mounting configurations: examples of mounting: 300 mm strips with an overlap of 66%
Strip’s hanging:
Remark: hanging hooks have to be fixed on the border ofthe strip just beside the overlap to avoid deformation orhalf-opening of the strips after use. Due to the hangingsystem, the first and the last hook have to be shortened.
With rail support Between poles or walls
On walls or ceiling With pipes support
Ring
W 000 010 237
For an 33 % overlap, betweentwo handinghooks.
Kit of 11 hooks: W 000 010 459
Kit of 10 rings: W 000 010 460
9-3
Strip’s hook
W 000 010 238
Width 200 mm, for 33.7 mm pipes,(usable for 32 mm)
See 13 page 9-9 See 21 page 9-10
See 19 page 9-10 See 24 page 9-10
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Protection strips
50 meters rolls
TO ORDER
9-4
9SH
OP P
ROTE
CTIV
EPR
ODUC
TS
Width Thickness Colour Catalogue n°
200 mm 2 mm Clear W 000 010 239
2 mm Orange CE W 000 010 230
2 mm Green S6 W 000 010 228
2 mm Green S9 W 000 010 229
300 mm 2 mm Clear W 000 010 240
3 mm Orange CE W 000 010 232
3 mm Green S6 W 000 010 458
3 mm Clear W 000 010 241
400 mm 4 mm Clear W 000 010 242
By set
NumberWidth Thickness Colour Height Catalogue n° Commentsof strips
2 000 mm 1 mm Orange CE 1 600 mm W 000 010 261 Dedicated to PROTECTLITE frame.2 000 mm 1 mm Green S6 1 600 mm W 000 010 484 Delivered with a set of 13 hooks Cat n° W 000 010 483
4 strips of2 000 mm 1 mm Green S9 1 600 mm W 000 010 487 For TRYPTICAL: 2 sets of strips and 2 sets of hooks
570 mm width2 000 mm 1 mm Orange CE 1 800 mm W 000 010 262
2 000 mm 1 mm Green S6 1 800 mm W 000 010 485 Dedicated to HORUS frame.
2 000 mm 1 mm Green S9 1 800 mm W 000 010 488 Delivered with a set of 13 hooks Cat n° W 000 010 483
2 000 mm 1 mm Orange CE 2 000 mm W 000 010 263
3 x 4 strips of 2 100 mm 2 mm Orange CE 1 800 mm W 000 010 333 Dedicated to UNIVERSAL frame (3 sets).300 mm width 2 100 mm 2 mm Green S9 1 800 mm W 000 010 335 Order also a kit of 11 hooks Cat n° W 000 010 459
7 strips of 1 860 mm 2 mm Orange CE 1 750 mm W 000 010 257Dedicated to OPTILAM frame.
300 mm width 1 860 mm 2 mm Green S9 1 750 mm W 000 010 256
Cut and punched at your request
Width Thickness Colour Catalogue n° Commentsfor 1 meter
2 mm Orange CE W 000 010 235
300 mm 2 mm Green S6 W 000 010 233
2 mm Green S9 W 000 010 234
200 mm 2 mm Clear W 000 010 243 On request
300 mm2 mm Clear W 000 010 244
On resquet3 mm Clear W 000 010 245
400 mm 4 mm Clear W 000 010 246 On request
Width Thickness Colour Catalogue n° Commentsfor 1 meter
2 mm Orange CE W 000 010 235
300 mm 2 mm Green S6 W 000 010 233
2 mm Green S9 W 000 010 234
200 mm 2 mm Clear W 000 010 243 On request
300 mm2 mm Clear W 000 010 244
On resquet3 mm Clear W 000 010 245
400 mm 4 mm Clear W 000 010 246 On request
300 mm
25 50
30
150 mm
Ø 10 mm
Standardpunching
Comments: To receive 10 strips of 1 800 mm, you have to order 18 times the reference W 000 XXX XXX corresponding to the colour you need.
ON REQUEST*
* Means items defined but not on stock normal delivery 2 weeks
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
CurtainsWelding curtains
The welding curtains are manufacturedin accordance with the EN 1598 Standard.
They are flame-proof, with a width of 1 400 mm.To prevent from ripping or tearing of the material, the foursides have been hemmed.Made from PVC with a thickness of 0.4 mm (0.5 mm for theGreen S9).They are supplied with 7 eyelets across the width completedwith 7 metal hanging rings.The curtains can be joined by the snap fasteners fitted onthe height side (12 cm from the border and 40 cm betweenthe two curtains).3 colours are avalaible:
Orange CE Green S6 Green S9
Clear curtains are designed to protect against draught, moisture, cold, dust,and grinding debris. They are flame-proof with a width of 1 400 mm. To prevent from ripping or tearing of the material, the four sides have beenhemmed.Made from PVC material which is 0.4 mm thick. They are supplied with7 eyelets across the width completed with 7 metal hanging rings.The curtain’s juxtaposition is provided by snap fasteners on the height side (12 cm from the border and 40 cm between two curtains).
Clear curtains
9-5
Thickness Width Height Colour Catalogue n° Comments
Orange CE W 000 010 354
Green S6 W 000 010 3501 400 mm
Green S9 W 000 010 358
Clear W 000 010 466
Orange CE W 000 010 355For PROTECTLITEGreen S6 W 000 010 3512 curtains1 600 mm
Green S9 W 000 010 359 and TRYPTICAL 3
1 400 mmClear W 000 010 467
Orange CE W 000 010 356For curtain support
0.4 mm Green S6 W 000 010 352 (1 curtain) and1 800 mmGreen S9 W 000 010 360 for UNIVERSAL
Clear W 000 010 468 (2 curtains)
Orange CE W 000 010 357
Green S6 W 000 010 3532 000 mm
Green S9 W 000 010 361
Clear W 000 010 469
Orange CE W 000 010 3681 700 mm 1 700 mm
Green S6 W 000 010 366ONLY for PREMIUM
Orange CE W 000 010 1740.4 mm 3 420 mm 1 300 mm
Green S9 W 000 010 173ONLY for MODULABLE
TO ORDER
Other curtains: on request under 15 days: heightof 2 200 mm, 2 400 mm, 2 600 mm,2 800 mm, 3 000 mm.
Special dimensions forcurtain on request: Price per m2 with eyelets on the widthside, click-in buttons on the heightside and metallic handling rings.ClearCatalogue n°: W 000 010 465
ColoredCatalogue n°: W 000 010 470
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Frames
9-6
9SH
OP P
ROTE
CTIV
EPR
ODUC
TS
The PREMIUM frame is a robust andportable screen.The curtain is tight and stable when inposition.• Width 1 750 mm, height 2 000 mm.• Galvanized pipes frame (diam. 25 x 1 mm).• UV protection in accordance with EN 1598
standard.• Screen 1 700 mm x 1 700 mm.
PREMIUM
Curtain support
The PROTECTLITE screen is a simplescreen with 2 welding curtains 1.6 mheight. Stable, it provides an efficientand modular barrier to the welding light.• The frame 2 000 mm x 2 100 mm, with
castors, is equipped with2 100 mm height curtains.
• Weight of the screen: 21 kg.• Metallic painted frame, and metallic rings
to hang the curtains.• UV protection in accordance EN 1598
standard.
PROTECTLITE
The UNIVERSAL screen is a very stablescreen, offered with castors. It is width2 100 mm and equipped with 300 mm x 2 mmstrips, an overlap of 66 % and a height of1 800 mm. • Width 2100 mm, height 2100 mm withcastors,• Painted steel frame,• Equipped with 10 strips height 1 800 mm
in accordance with EN 1598 standard.
UNIVERSAL
Example of equipped frame
This support is suitable for welding curtains orclear curtains with a height of 1 800 mm anda width of 1 400 mm.• Technical data: height 2 100 mm,
width 1 350 mm, weight 11 kg.• Tubular frame, resistant, stable and easy
to assemble.
Catalogue N°: W 000 010 349
Has to be equipped exclusively withcurtains 1 700 mm x 1 700 mm (seepage 9-5).
Catalogue N°: W 000 010 362
Has to be equipped with 2 curtains1 600 mm (see page 9-5)or with 4 strips (570 x 1)overlap 50 mm (see page 9-4).
Catalogue N°: W 000 010 224
Has to be equipped with 2 curtains(see page 9-5) or with 10 strips height1 800 mm (300 x 2) overlap 66%(see page 9-4).For strips, order also a set of 11 hooksW 000 010 459.
Catalogue N°: W 000 010 269
Example of equipped frame
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Frames
9-7
Has to be equipped with a set of4 strips (see page 9-4).
Catalogue N°: W 000 260 715
The OPTILAM screen is a special screen with300 mm x 2 mm strips across the frame. Itsframe has a special design to enable easyportability whilst giving a very good stabilitywhen in position.The design of the feet allows the screensto be placed at 90° to each other. • Width 1 860 mm, height 1 930 mm.• Painted frame.• Equipped with 7 strips of 1 750 mm height
in accordance with EN 1598 standard.
Has to be equipped with a set of 7 strips(W 000 010 257 or W 000 010 256see page 9-4).Delivered with 8 hooks and 6 rings.
Catalogue N°: W 000 010 254OPTILAM
TRYPTICAL
HORUS
The HORUS screen is a special screen withfour 570 mm x 1 mm strips across the frame.Its frame has a special design (one side withcastors) which is easy to use and gives a verygood stability when in position.The HORUS screen is easy to walk through, it'salso an easy solution to create a welding booth.• Width 1 860 mm, height 1 930 mm.• Painted steel frame.• Equipped with 4 strips of 1 800 mm height
in accordance with EN 1598 standard.
This triptych screen is equipped with 1600 mmheight welding curtains.• Frame’s width 3 500 mm (800 + 1 900 + 800)
height 2 000 mm.• Painted frame rectangular pipes 30 x 30 x 2 mm,
with 2 free castors, and 2 castors with brake.• UV protection in accordance
with EN 1598 standard.• Three 1 600 mm
height curtains.
Has to be equipped exclusively withcurtains 3 420 mm x 1 300 mm(see page 9-5).
Catalogue N°: W 000 010 175MODULABLE
This frame is a structure for 0.4 mm curtainfixed with a velcro all over the frame.
• Frame’s width 3 420 mm (810 mm + 1 800 mm+ 810 mm) height 1 900 mm, weight 37 kg,
• Painted frame with 4 castors, 2 with brakes,• UV protection in accordance with EN 1598
standard,• Curtain's height 1 300 mm,• 2 colours: Orange CE and Green S9
(see page 9-5).
Has to be equipped with a setof 3 curtains (see page 9-5) or8 strips of 1 600 mm x 570 mm x 1 mm(see page 9-4).For strips, order also 2 sets of strips.
Catalogue N°: W 000 010 224+ W 000 010 226
TRYPTICAL with curtains
TRYPTICAL with strips
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY 9-8
9SH
OP P
ROTE
CTIV
EPR
ODUC
TS
Kits
KitsComposition
Frame Equipment:curtains ou strips
Hooks
PREMIUM Orange CE W 000 010 365 W 000 010 362 + W 000 010 368Green S6 W 000 010 363 W 000 010 362 + W 000 010 366Green S9 W 000 010 364 W 000 010 362 + W 000 010 367
PROTECTLITE Orange CE W 000 010 521 W 000 010 224 + 2 x W 000 010 355Green S6 W 000 010 522 W 000 010 224 + 2 x W 000 010 351Green S9 W 000 010 523 W 000 010 224 + 2 x W 000 010 359
Orange CE strips W 000 010 471 W 000 010 224 + W 000 010 261 + W 000 010 483Green S6 strips W 000 010 519 W 000 010 224 + W 000 010 484 + W 000 010 483Green S9 strips W 000 010 520 W 000 010 224 + W 000 010 487 + W 000 010 483
UNIVERSAL Orange CE W 000 010 524 W 000 010 269 + 2 x W 000 010 356Green S6 W 000 010 525 W 000 010 269 + 2 x W 000 010 352Green S9 W 000 010 526 W 000 010 269 + 2 x W 000 010 360
Orange CE strips W 000 010 490 W 000 010 269 + 3 x W 000 010 333 + W 000 010 459 Green S9 strips W 000 010 492 W 000 010 269 + 3 x W 000 010 335 + W 000 010 459
HORUS Orange CE strips W 000 010 262 W 000 260 715 + W 000 010 462 + W 000 010 483Green S6 strips W 000 010 485 W 000 260 715 + W 000 010 485 + W 000 010 483Green S9 strips W 000 010 488 W 000 260 715 + W 000 010 488 + W 000 010 483
Clear strips W 000 010 715 W 000 260 715 + W 000 010 263 + W 000 010 483
OPTILAM Orange CE W 000 010 472 W 000 010 254 + W 000 010 257Clear W 000 010 474 W 000 010 254 + W 000 010 256
KitsComposition
Frame Equipment:curtains ou strips
Hooks
TRYPTICAL Orange CE W 000 010 480 W 000 010 224 + 3 x W 000 010 355 + W 000 010 226Green S6 W 000 010 481 W 000 010 224 + 3 x W 000 010 351 + W 000 010 226Green S9 W 000 010 482 W 000 010 224 + 3 x W 000 010 359 + W 000 010 226
TO ORDER
9-9 Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BYAir Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Accessories (for curtains and strips)
(between 2 supports - maximum length2 meters - maximum weight 57 kg)
Designation Catalogue n°
1 Ceiling rail connector single rail W 000 010 209
2 Ceiling rail connector double rail W 000 010 210
3 Side wall rail connector W 000 010 208
4 Ceiling support for rail support W 000 010 214
5 Wall support for rail supports part W 000 010 213
6 Rail connector for 2 rails long bolt M10 W 000 010 212
7 Rail support with long bolt M10 W 000 010 211
8 Rail 3 000 max (30 x 35 mm)- 1 meter W 000 010 199- 2 meters W 000 010 200- 3 meters W 000 010 201
9 End piece W 000 010 215
10 Rail 90° elbow, radius 500 mm W 000 010 205
11 Rail stop with buffer W 000 010 216
12 Four-wheel runner W 000 010 178
13 Two-wheel runner W 000 010 177
14 Plastic two wheel runner (for curtains) W 000 010 176
15 Side wall support for double rail or pipe W 000 010 207
16 Universal support W 000 010 218
17 Sliding hook, plastic W 000 010 221
18 Extremity rail support for curtains W 000 010 217
8
5
7
7
7 7
15
8
84 8
1 2
3
4
5
6
7
8
9
10
11
12
13
14
17
18
15
16
Rail 30 x 35
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY 9-10
9SH
OP P
ROTE
CTIV
EPR
ODUC
TS
Accessories (for curtains and strips)
Tube 33.7 mm and accessories
15
16
27
28
21
25
22
24
20
19
23
3031
29
32 33
7
8
13
15
Designation Catalogue n°
15 Side wall support for double rail or pipe W 000 010 207
16 Universal support W 000 010 218
19 Ceiling support for rail support W 000 010 182
20 Pipe Ø 33.7 mm- 1 meter W 000 010 187- 2 meters W 000 010 188- 3 meters W 000 010 189
21 Flange for connecting pipe W 000 010 183
22 Pipe support W 000 010 181
23 Pipe connector W 000 010 185
24 Pipe support for long dimension W 000 010 184
25 Opening ring W 000 010 223
26 Poles- 50 x 50 x 2 250 mm W 000 010 194- 50 x 50 x 2 500 mm W 000 010 196- 50 x 50 x 2 700 mm W 000 010 197- 50 x 50 x 3 000 mm W 000 010 198- 80 x 80 x 2 500 mm W 000 010 195- 80 x 80 x 3 000 mm W 000 010 193
27 Suspension clip plastic W 000 010 238
28 Ring (33 %) W 000 010 237
29 Four wheel runner with tunable thread W 000 010 179
30 10 open rings 5 mm Ø 50 W 000 010 220
31 10 open rings 4 mm Ø 40 W 000 010 219
32 7 curtain's rings W 000 010 170
33 10 S rings W 000 010 206
20 27 22
26
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Accessories (for curtains and strips)
Opening system
Curtain’s swivel winch
• winch with wire strainer,
• cable,
• maximum gap 8 000 mm,
• delivered without curtain.
Catalogue n°: W 000 010 301
Swivel arm with indexing position
for curtains or strips
Suitable for 50 x 50 mm column
• indexing position: - 90°, 0, + 90°
• length 1 000 to 2 000 mm, to be indicated when ordering
Catalogue n°: W 000 010 298
Swivel arm with indexing position
for curtains or strips
Suitable for 120 x 120 mm column or a wall, withdouble hinges
• indexing position: - 90°, 0, + 90° on the two hinges
• length 2 000 to 4 000 mm, to be indicated when ordering
Catalogue n°: W 000 010 300
Suitable for 80 x 80 mm column
• indexing position: - 90°, 0, + 90°
• length 2 000 to 4 000 mm, to be indicated when ordering
Catalogue n°: W 000 010 299
Maximum length 2000 mm
Maximum length 4000 mm
Maximun length 4 000 mmMaximum gap between the two hinges 1 300 mm
9-11
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY 9-12
9SH
OP P
ROTE
CTIV
EPR
ODUC
TS
Central frame alone 2 100 mm Swivelling link alone, swivelling with 2 frames
Modular components UNIVERSAL
Modular components TRYPTICAL
W 000 010 269 1.3 m length. W 000 010 270
1.7 m length. W 000 010 271
2.1 m length. W 000 010 272
With 4 castors
Swivelling link
Swivelling link Central frame Central frame
0.7 m length.
W 000 010 273
1.1 m length.
W 000 010 274
Strip’s handing hook 4 screens fittedtogether withswivelling linkscould make a fullseparation withoutsealing:
= 4 x W 000 010 269
+ 2 x W 000 010 272
+ Strips and hooks
W 000 010 238
Width Nb of Nb ofin meter strips curtains
0.7 3 1
1.1 5 1
1.3 6 1
1.7 8 2*
2.1 10 2
How to completethe frames?
* take in account the total length ofthe structure
• Central frame: length 1 900 mm, height 2 000 mm.Catalogue n°: W 000 010 224
• Extension frame: length 1 900 mm, height 2 000 mm.Catalogue n°: W 000 010 225
• Set of 2 swivelling support for 1/2 extension frame.Catalogue n°: W 000 010 227
• Set of 2 extension frames 800 mm.Catalogue n°: W 000 010 226
• Set of 2 castors spares, one with brakes.Catalogue n°: W 000 010 497
Swivellingextension
1/2 extension frame
See equipment:curtains or stripspage 9-4 and 9-5
Central frame
See equipment:curtains or stripspage 9-4 and 9-5
Accessories (for curtains and strips)
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY9-13
Curtains andheat resistant fabrics MO CERTIFICATE
Example of ETNA curtain
Example of VULCAIN curtain
Example of ETNA curtain
Example of VESUVIO curtain
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY 9-14
9SH
OP P
ROTE
CTIV
EPR
ODUC
TS
Curtains andheat resistant fabrics
CHRONOS range is coated one face with polyurethane
VULCAIN range is made of glass fibre Thermo E coated withflame retardant product on each side to increase the heat resistanceand the mechanical resistance. M0 certification.
VESUVIO range is a thermo E glass fabric with inorganiccoating on both side to increase temperature and mechanicalresistance. M0 certification.
ETNA range is made of glass fibre with high temperature resistance,recommended for horizontal use. Welding spatters can fall on theETNA fabric where it can cool down. Thermo E, M0 certification.
STROMBOLI range is made of Silicate fabrics with very hightemperature resistance. Recommended for horizontal or verticalprotection. M0 certification, treated with mineral coating to improveits resistance to fraying and its abrasive resistance.
Temperature Name Dimensions Catalogue N° Thickness Weight Comments(mm) (mm) g/m2
1 600 x 1 500 W 000 010 316 0.7 1.75On request height 2 200 mm, 2 400 mm, 2 800 mm, 3 000 mm. Delivery under 3 weeks
500 °C, VULCAIN
1 800 x 1 500 W 000 010 317 0.7 2On request height 2 200 mm, 2 400 mm,
peak at 600 °Ccurtain 2 800 mm, 3 000 mm. Delivery under 3 weeks
2 000 x 1 500 W 000 010 318 0.7 2.2On request height 2 200 mm, 2 400 mm, 2 800 mm, 3 000 mm. Delivery under 3 weeks
1 000 x 2 000 W 000 274 163 0.7 0.68 Light welding - Vertical protection2 000 x 2 000 W 000 274 164 0.7 0.68 One side polyurethane coated
500 °C, CHRONOS2 000 x 3 000 W 000 274 165 0.7 0.68
On request width 1 000 mm
peak at 550 °Cnot hemmed < 25 m W 000 274 169
3 000 x 3 000 W 000 274 166 0.7 0.683 000 x 4 000 W 000 274 167 0.7 0.684 000 x 4 000 W 000 274 168 0.7 0.68
On request other dimensions2 000 x 1 000 W 000 010 319 0.7 1.5 Price calculation using W 000 010 528 code
multiplied by the number of square meters
2 000 x 2 000 W 000 010 320 0.7 2.95Per meter, width 1 000 mm, not hemmed:
500 °C, VULCAIN up to 25 m W 000 010 498
peak at 600 °C blanket 3 000 x 2 000 W 000 010 321 0.7 4.35Per meter, width 1 500 mm, not hemmed:up to 25 m W 000 010 499
3 000 x 3 000 W 000 010 322 0.7 6.54 000 x 3 000 W 000 010 323 0.7 8.74 000 x 4 000 W 000 010 324 0.7 11.521 000 x 1 000 W 000 010 529 0.7 1.12 000 x 1 000 W 000 010 530 0.7 2.2
700 °C, VESUVIO2 000 x 2 000 W 000 010 531 0.7 4.5
peak at 750 °C 3 000 x 2 000 W 000 010 532 0.7 6.53 000 x 3 000 W 000 010 533 0.7 9.84 000 x 3 000 W 000 010 534 0.7 1.3
1 000 x 1 000 W 000 010 325 1.6 1.2On request per square meterW 000 010 332
2 000 x 1 000 W 000 010 326 1.6 2.3By meter, width 1 000 mmnot hemmed < 25 m W 000 010 500
750 °C, 2 000 x 2 000 W 000 010 327 1.6 4.6By meter, width 1 500 mm not hemmed
peak at 900 °CETNA on request
3 000 x 2 000 W 000 010 328 1.6 6.83 000 x 3 000 W 000 010 329 1.6 104 000 x 3 000 W 000 010 330 1.6 13.44 000 x 4 000 W 000 010 331 1.6 17.91 000 x 2 000 W 000 274 170 1.6 1 Special flame
1 000 °C SIRIUS2 000 x 2 000 W 000 274 171 1.6 1
On request width 1 000 mmnot hemmed < 25 m W 000 274 174
2 000 x 3 000 W 000 274 172 1.6 13 000 x 3 000 W 000 274 173 1.6 11 000 x 900 W 000 010 535 1.3 1.12 000 x 900 W 000 010 536 1.3 2.2
1 000 °C,STROMBOLI 2 000 x 1 800 W 000 010 537 1.3 4.3
peak at 1 200 °C3 000 x 1 800 W 000 010 538 1.3 6.43 000 x 2 700 W 000 010 539 1.3 9.5
MO CERTIFICATE
Criterion: temperature level, except VULCAIN curtain for plasma or welding spatters and sparks
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY9-15
Curtains andheat resistant fabricsInsulating products
This kind of product is used either to cool down parts in a controlled way or to protect people from hotparticles.
Temperature: 550 °C, peak at 600 °C.
Temperature: 550 °C, peak at 600 °C.
Temperature: 550 °C, peak at 600 °C .
Prevent welders from injuries due to hot particles and/or offerthem a better and confortable welding position. Cushions arefilled with glass fibre.
Welding cushions
Cushions Thickness Catalogue n°
500 mm x 500 mm 80 mm W 000 010 541
1 000 mm x 1 000 mm 80 mm W 000 010 542
Specially designed for controlling cool down of just welded pipes.
They adapt to different diameters and size of the surroundedparts.
Insulating sleeves
Insulating sleeves Diameter Catalogue n°
1 000 mm x 500 mm 280 mm W 000 010 543
1 500 mm x 500 mm 440 mm W 000 010 544
2 000 mm x 500 mm 610 mm W 000 010 545
Specially design for controling cooling down of just weldedparts.
Insulating blankets
Insulating blankets Thickness Catalogue n°
1 000 mm x 2 000 mm 30 mm W 000 010 546
2 000 mm x 2 000 mm 30 mm W 000 010 547
1 000 mm x 2 000 mm 60 mm W 000 010 548
2 000 mm x 2 000 mm 60 mm W 000 010 549
New finishing: - Stainless steel wire coated with Kevlar- Seams strengthened- Grid fabrics
9-16
9SH
OP P
ROTE
CTIV
EPR
ODUC
TS
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
PROPHONIC range
Customer benefits:• Very strong structure• Very good sound proofing• Easy mounting
Panels of 2 000 mm, 2 500 mm or 3 000 mm with 512 mm or 1 012 mm width.Bottom space is generally 150 mm for 2 000 mm and 2 500 mm and without free space for 3 000 mm.This modular system allows to compose welding boothsystem providing a confortable protection against lightand noise in case of welding or grinding.
Soundinsulating walls
Thickness of the panel 50 mm.
Made with 7 sandwiched layers that guaranteetheir efficiency:
�1 Perforated steel
�2 Wool and glass fibre
�3 Sound absorbing rock wool
�4 Steel
Panels and frames are painted with U.V. absorbinggreen.
The panels are resistant to welding or grinding spatter.They are non flammable.
They make your workshop safe and confortable.
Remark: for an independent mounting, the first panel needs two feet and anextension. 3 000 mm height panel exists also on special request.
50 mm
�1 �2 �3 �4 �3 �2 �1
Technical characteristics Standard PROPHONIC elements construction
DesignationCatalogue n°
Height 2 000 mm Height 2 500 mm
1 Modular element 512 mm x 50 mm W 000 010 503 W 000 010 509
2 Modular element 1 012 mm x 50 mm W 000 010 504 W 000 010 510
3 Adjustable foot W 000 010 505 W 000 010 505
4Extension for fitting extra foot
W 000 010 506 W 000 010 506on modular element
5Joining pole for connecting
W 000 010 507 W 000 010 513modular elements 90°
6 Rail support W 000 010 508 W 000 010 508
1
2
3
4
6 5
Panel'sheight
150 mm
To ordersee page 9-19
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY9-17
Soundinsulating elements
Side and roof are made with 2 500 mm high PROPHONIC panels (see structure page 9-16) but only perforated inside. They have anantipanic door inside.
On the roof, a 200 x 200 mm opening is provided to add a fumeextraction system.
An air intrance is also provided on the door. It’s necessary to allow 300 m3h/people.
PROPHONIC gringing booth L. 2 130 mm x W. 3 140 mm x H. 2 552 mmCatalogue n°: W 000 010 551(transportation and mounting are not included)
PROPHONIC grinding booth L. 2 130 mm x W. 2 130 mm x H. 2 552 mmCatalogue n°: W 000 010 550(transportation and mounting are not included)
DimensionsL x W x H (mm)
Singledoor right
Doubledoor right Remarks
3.14 x 3.14 x 2,55 • -
4.10 x 3.14 x 2,55 - • Double door 4.10 m side
4.20 x 3.10 x 2,55 - • Double door 3.10 m side
4.20 x 4.10 x 2,55 - •
5.18 x 4.10 x 2,55 - • Double door 4.10 m side
5.10 x 4.20 x 2,55 - • Double door 5.10 m side
5.10 x 5.18 x 2,55 - •
6.28 x 5.10 x 2,55 - • Double door 5.10 m side
6.10 x 5.18 x 2,55 - • Double door 6.10 m side
6.28 x 6.10 x 2,55 - •
7.11 x 5.18 x 2,55 - • Double door 7.10 m side
Delivery time around 5 weeks.Standard colour green RAL6011. Other colours on request.
L. 7 000 mm x W. 4 500 mm x H. 2 500 mm
L. 4 000 mm x W. 3 000 mm x H. 2 500 mm
Grinding boothTo order
see page 9-19
NEWPHONIC panels
9-18
9SH
OP P
ROTE
CTIV
EPR
ODUC
TS
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY
Customer benefit:The cheapest solution with a light structure
NEWPHONIC panels are made with standard elements having soundabsorbing function.
They are 50 mm thick with 2 layers of dust protection rockwool of25 mm maintained between 2 perforated plates painted steel.
Standard elements are 1 012 mm x 1 012 mm or 1 012 mm x 506 mm.
They are powder coated with U.V. absorbing green RAL 6011 and canbe supplied with or without space at the botttom.
Steelpartition panels To order
see page 9-19
Workshop with PROPHONIC boothes
Grinding booth 4 000 x 3 000 mmwith opening roof 2 x (1 000 x 3 000 mm) Welding booth 2 000 x 2 000 mm
Grinding booth with air renewal from the ceiling
PROPHONIC examples
PROPHONIC boothes
Angle foot fiting
Front foot fitting1012 x 1012 mm panel
512 x 1012 mm panel
Height assembling
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY9-19
To ordersee page 9-19
Partitionsteel panels
TO ORDER
PROPHONIC
NEWPHONIC
STEEL MODULARPANELS
GRINDING BOOTH
Catalogue n°Panel 512 mm x 50 mm x 2 000 mm W 000 010 503Panel 1 012 mm x 50 mm x 2 000 mm W 000 010 504Panel 512 mm x 50 mm x 2 500 mm W 000 010 510Panel 1 012 mm x 50 mm x 2 500 mm W 000 010 509Adjustable foot W 000 010 505Extension W 000 010 506Joining pole for 2 meter panel W 000 010 507Joining pole for 2.5 meter panel W 000 010 513
Catalogue n°Panel 460 mm x 1 960 mm W 000 010 302Panel 960 mm x 1 960 mm W 000 010 303Pole 50 mm x 50 mm x 2 250 mm W 000 010 194
Catalogue n°2 130 mm x 2 130 mm x 2 552 mm W 000 010 5502 130 mm x 3 140 mm x 2 552 mm W 000 010 551
Just calculate the m2 you need (taking into account thestandard width of 506 mm or 1 012 mm). The reference W 000 010 552 gives you a quotation withouttransportation and mouting.
Welding boothes or work boothes can also be made withWELDLINE modular steel panels. These panels can be paintedwith any colour or galvanized. We advise against doing clearpainting or galvanized boothes for welding environment.
These panels are designed for a very strong structure. Two widthsare possible 960 mm or 460 mm and a height of 1 960 mm.
They are fitted on 50 mm x 50 mm poles with a height of 2 250 mm,and a footplate 200 mm x 200 mm x 5 mm.
The height of the booths will be same than the poles (2 250 mm),with a free space at the bottom to make the cleaning easier. Thebooth can be equipped either with strips or curtains.
PanelH. = 1 960 mml. = 460 mm
Pole 50 x 50H. = 2 250 mm
PanelH. = 1 960 mml. = 960 mm
Strips 300 mm x 2 mmon swivel door
Air Liquide Welding reserves itself the right to embody modifications without prior notice.The illustrations, descriptions and characteristics are given for information only and do notengage the responsibility of the constructor.
Tel.: + 33 134 213 333 - Web: www.weldline-alw.com WELDLINE is an Air Liquide Welding trademark
PROFESSIONAL WELDING PRODUCTS BY 9-20
9SH
OP P
ROTE
CTIV
EPR
ODUC
TS
TO ORDER
Width 2 000 mm, length 2 000 mm, height on the sides 2 000 mm,on the middle 2 200 mm.
Canvas is made of white mat PVC (630 g/m2) certificated fireresistant M2.
2 opening: one on front, one on the back closed with eyelets andstaps.
All around a protection of 200 mm provides a full isolation againstbad weather. The structure is made of galvanized tubes of 25 mm.
PVC plates 3 mm width. Comply with with EN 1598.
Orange CE - Protection against welding light transmission.
Exist in 2 050 mm x 1 250 mm x 3 mm 1 025 mm x 1 250 mm x 3 mmmade to measure
+ product:
• Self extinguishing canvascertificated M2.
• Resistant structure.
• Height of 2 200 mm in the middle.
• Good isolation.
Welding tents
Impact plates
EN 1598
Catalogue n°Canvas W 000 274 366Structure W 000 274 367PVC plate 2 050 mm x 1 250 mm W 000 274 367PVC plate 1 025 mm x 1 250 mm W 000 274 367
M2 CERTIFICATE
ON REQUEST*
* Means items defined but noton stock. Normal delivery 2 weeks
Catalogue n°2 050 mm x 1 250 mm x 3 mm W 000 274 7441 025 mm x 1 250 mm x 3 mm W 000 274 745
Air Liquide is the world leader in gases for industry, health and the environment, and is present in over 75 countries with 43,000 employees. Oxygen, nitrogen, hydrogenand rare gases have been at the core of Air Liquide’s activities since its creation in 1902. Using these molecules, Air Liquide continuously reinvents its business,anticipating the needs of current and future markets. The Group innovates to enable progress, to achieve dynamic growth and a consistent performance. Air Liquide combines many products and technologies to develop valuable applications and services not only for its customers but also for society.
Non
con
trac
tual
pic
ture
s –
Ref
. W 0
00 2
57 8
07 -
08/
2009
- E
d4 -
J3.
5 -
QB
251
5W
eldl
ine
rese
rves
the
rig
ht t
o ca
rry
out
mod
ifica
tions
to
its m
achi
nery
with
out
prio
r no
tice.
The
man
ufac
ture
r ac
cept
s no
liab
ility
for
illust
ratio
ns,
desc
riptio
ns a
nd c
hara
cter
istic
s, w
hich
are
for
info
rmat
ion
only.
www.airliquide.com
Contacts for other coutriesALWInternational Development DepartmentItalyFRO - AIR LIQUIDE WELDING ITALIEVia Torricelli15/A37135 VERONATel: +39 045 82 91 511Fax: +39 045 82 91 536Email: [email protected]
ALWInternational Development DepartmentFrance13, rue d'EpluchesBP 70024 Saint Ouen l'Aumône95315 CERGY-PONTOISE CedexTel: +33 1 34 21 33 33 Fax: +33 1 30 37 19 73Email: [email protected]
ALWInternational Development DepartmentSwitzerlandOERLIKON - SCHWEISSTECHNIK-AGMandachstrasse 54CH 8155 NIEDERHASLITel: + 41 44 307 61 11Fax: + 41 44 307 61 12Email: [email protected]
www.oerlikon-welding.com
ContactsBELGIUMAIR LIQUIDE WELDING BELGIUM SAZ.I. West Grijpen - Grijpenlaan 5 - 3300 TIENENTel.: +32 16 80 48 20 - Fax: +32 16 78 29 22CHINASAF SHANGHAI REP.OFF.Rm 722 Pine City Hotel777 Zhao Jia Bang Lu - SHANGHAI 200032Tel.: +86 21 64 43 89 69 - Fax: +86 21 64 43 58 97CZECH REPUBLICAIR LIQUIDE WELDING CZ S.R.O.Podnikatelská 565 - Areál SVUM - 190 11 PRAHA 9 - Búchovice Tel.: +420 274 023 163 - Fax: +420 274 023 233HUNGARYAIR LIQUIDE WELDING HUNGARY KFTKrisztina krt. 39/b - H-1013 BUDAPESTTel.: +36 1 339 8650 - Fax: +36 1 339 8649ITALYAIR LIQUIDE WELDING ITALYVia Torricelli 15/A - 37135 VERONATel.: +39 045 82 91 511 - Fax: +39 045 82 91 536LUXEMBOURGAIR LIQUIDE WELDING LUXEMBOURG S.A.5 rue de la Déportation - BP 1385 - L-1415 LUXEMBOURGTel.: +352 48 54 56 - Fax: +352 48 54 57MALAYSIASAF-OERLIKON MALAYSIA SDN BHDNo 10, Jalan TPP 5/1Taman Perindustrian Puchong - 47100 PUCHONG, SELANGORTel.: +603 8060 8638 - Fax: +603 8061 620NETHERLANDSAIR LIQUIDE WELDING NETHERLANDSRudonk 6 B - NL 4824 AJ BREDATel.: +31 76 541 00 80 - Fax: +31 76 541 58 96
POLANDAIR LIQUIDE WELDING POLSKA - SP. Z.o.oUL. Porcelanowa 10 - 40-246 KATOWICETel.: +48 32 609 04 50 - Fax: +48 32 609 04 60PORTUGALAIR LIQUIDE SOLDADURA LDARua Dr. António Loureiro Borges, 4-2° ArquiparqueMiraflores - 1495-131 ALGÉSTel: +351 21 41 64 900 - Fax: +351 21 41 69 40ROMANIADUCTILAleea Industriilor Nr 1 - 120224 BUZAUTel.: +40 238 722 058 - Fax: +40 238 716 861RUSSIAAIR LIQUIDE WELDING17 Vorontsovskaya Str. - 109147 MOSCOW Tel.: +7 495 641 28 98 - Fax: +7 495 641 28 91SLOVAKIAAIR LIQUIDE WELDING CENTRAL EUROPE S.R.O.Prazska 35 - 94901 NITRATel.: +421 37 69 24 601 - Fax: +421 37 65 19 919THAILANDEAIR LIQUIDE WELDING THAILAND Co. Ltd.40 Moo 6 - Ramindra Road Km 9.5 - KHANNAYAO, BANGKOK 10230Tel.: +66 29 43 2250 - Fax: +66 29 43 2256UAEAIR LIQUIDE WELDING MIDDLE EAST FZEJebel Ali free zone warehouse No. FZS1AH05P.O. BOX 18734 - Jebel Ali - DUBAITel.: +971(0)48861606 - Fax: +971(0)48861608UKRAINEAIR LIQUIDE WELDING UKRAINE, Llc.1 rue Proskura - bureau 106A - 61070 KHARKOVTel.: +380 577 546 867 - Fax: +380 577 546 867