Dan Tovey, University of Sheffield User Board Overview Dan Tovey University Of Sheffield.
ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River...
-
Upload
sean-compton -
Category
Documents
-
view
222 -
download
6
Transcript of ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River...
![Page 1: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/1.jpg)
ENV-2E1Y: Fluvial Geomorphology: 2004 - 5
Slope Stability and Geotechnics
Landslide Hazards
River Bank Stability
Section 2 - Water Flow in Soils
N.K. ToveyН.К.Тови М.А., д-р технических наук
Landslide on Main Highway at km 365 west of Sao Paulo: August 2002
Lecture 5 Lecture 6
![Page 2: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/2.jpg)
2.1 Introduction
• Three component parts to the water pressure:-
– pressure arising from a static head (wZ)
– excess pore water pressure (pressure head differential which actually causes water flow. (u )
g
vw
2
2
g2
vuZ
2w
w
g
vuZH
w 2
2
– a velocity head =
total = position + pressure + velocity
head head head head
•total pore water pressure (pwp) =
![Page 3: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/3.jpg)
Fig. 2.1 Flow of water in a simple channel section
2.2 Hydraulic GradientPressure at A is w h1
and at B is w h2
hydraulic gradient =
Water In
Soil Sample
P1
h1
Standpipes
h2
Water Out
A B
21 hh
i
ds
dhi
)( 21 hh
i w
more generally
NOTE: The hydraulic gradient as defined above is dimensionless (i.e. has no units).
some other disciplines
.....(kNm-3)
P2
![Page 4: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/4.jpg)
vQAat
Water IN
z
h
2.3 The Permeameter - (Constant Head)
k - coefficient of permeability
v k i kdhdsa
Q - flow rate
At - cross section area
Darcy’s Law
![Page 5: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/5.jpg)
2.5 Results from Permeameter
Quicksand occurs
Medium Dense
e=0.620
k=2.93 mm/s
Loose Dense
e=0.744
k=5.89 mm/s
![Page 6: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/6.jpg)
2.5 Results from Permeameter
m - total mass of sand
A - cross section of sand column
L - length (height) of column of sand
Volume occupied = A.L
Volume of Sand grains = wsG
m
ws
ws
Gm
GmAL
e
1
m
ALG ws
![Page 7: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/7.jpg)
• Falling Head Permeameter is used for clays
- in constant head permeameter, flow rate is far to small to get meaningful readings
• Formation of a Quicksand - Piping
• occurs when upward seepage force
= downward force from self weight
Further Comments about Permeability
ih
zA
A
G
ecritcrit t
t w
s
' 1
1
![Page 8: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/8.jpg)
• Analogies in Heat Flow and Electricity– In HEAT FLOW - (ENV-2D02)
2.10 Flow of Water in Soils
)( 21 Ak
Q
– In the FLOW of ELECTRICTY
Where Q is the heat flow rate
1 is the internal temperature
2 is the external temperature
A is the cross-section area
k is the thermal conductivity
is the path length
)( 21 EEAk
I
Where I is the current
E1 is the inlet voltage
E2 is the outlet voltage
A is the cross-section area
k is the electrical conductivity
is the path length
![Page 9: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/9.jpg)
• In the FLOW of WATER in SOILS
2.10 Flow of Water in Soils (continued)
)( 21 hhAk
Q
Where Q is the water flow rate
h1 is the inlet head
h2 is the outlet head
A is the cross-section area
k is the permeability
is the path length
1) Mathematical solutionsa) exact solutions for certain simple situationsb) solutions by successive approximate - e.g. relaxation methods
2) Graphical solutions
3) Solutions using the electrical analogue
4) Solutions using models
Only graphical methods will be used in this course
![Page 10: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/10.jpg)
1) flow lines and equipotentials are at right angles to one another.
2) the cylinder walls are also flow lines.
3) distances between the equipotentials are equal
head drops between the equipotentials are also equal.
2.12 Graphical Solutions - Flow Nets
Equi-potentials
Flow Lines
Water IN
![Page 11: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/11.jpg)
2.12 Asymetric Flow
![Page 12: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/12.jpg)
2.12 Asymetric Flow
• Intersections are at right angles
• approximate to curvilinear square
A
B
C
D
![Page 13: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/13.jpg)
2.12 Asymetric Flow
• Intersections are at right angles
• approximate to curvilinear square
A
B
C
D
nd pressure drops
a
![Page 14: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/14.jpg)
pressure drop between AB and CD is H and let there be nd pressure drops and nf flow lines. dn
Hhi
aand
n
kHakiaq
df
2.12 Asymetric Flow (continued)
where qf is the flow per unit cross-section and a x 1 is the cross- section between flow lines.
dn
kHkivLawsDarcyBy :'
the total seepage =
df n
kHq
d
fff n
kHnqn
![Page 15: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/15.jpg)
Summary of Flow Nets
Solutions are relatively straightforward.
1)draw the appropriate flow net
2)count the number of pressure drops in the flow net
(over the relevant distance)
3)count the number of flow lines
4)do a simple calculation
– work out total flow
– work out pressure at any given point
– etc.
![Page 16: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/16.jpg)
2.13 Seepage around an obstruction
H
A
B
![Page 17: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/17.jpg)
upward seepage force =
2.13 Seepage around an obstruction d
wab
n
HN
'
'
d
wab
n
HN
ab
d
ws N
n
HF
'
downward force of the soil =
A quicksand will occur if
but very approximately ' = w so
actual downward force of the soilFactor of safety = ----------------------------------------------------------- downwards force required to resist seepage force
In the above example, nd = 10 and Nab ~ 3.5
i.e. the distance must exceed 0.35 times the difference in head of water.
H5.3
10Fs
l
wd
ab
n
HNor
'
![Page 18: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/18.jpg)
Rules for drawing flow nets:-
1) All impervious boundaries are flow lines.
2) All permeable boundaries are equipotentials
3) Phreatic surface - pressure is atmospheric, i.e. excess pressure is zero.
2.14 Flow nets Summary
h
h
h
h
h
h
Water table
Change in head between adjacent equipotentials equals the vertical distance between the points on the phreatic surface.
4) All equipotentials are at right angles to flow lines
5) All parts of the flow net must have the same geometric proportions
(e.g. square or similarly shaped rectangles).
6) Good approximations can be obtained with 4 - 6 flow channels. More accurate results are possible with higher numbers of flow channels, but the time taken goes up in proportion to the number of channels.
The extra precision is usually not worth the extra effort.
![Page 19: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/19.jpg)
Uplift arises the total water pressure exerted on the base.
Static head (constant for flat based obstruction)excess head.
2.17 Uplift on Obstructions
0 1 2 3Distance under obstruction (m)
4
3
2
1
0H
ead
of
Wat
er (
m)
6 m
3 m
4 m
2
![Page 20: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/20.jpg)
If total uplift force > the self weight downward
object will be displaced downstream.
Draw flow net
Plot graph of uplift pressure (Y –axis) against distance along base (X-axis). Uplift pressure is estimate from flownet
head at the upstream head is ~0.75 of total head head at the down stream end it is ~0.25 of the total head.
2.17 Uplift on Obstructions
![Page 21: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/21.jpg)
• Base of the obstruction is 2m below the surface • uplift force from the static head is 2w multiplied by width
(i.e. 6w kN per metre length).
• the upward force is the area under the curve multiplied by w.
In this example upward force = 6w kN per metre length, i.e. in this case it equals the static head uplift. total uplift = 12w kN m-1.
Uplift reduces ability of the obstruction to resist movement through the pressure of water
potential boulder blockages in a river man-made drop structure built in river engineering works to dissipate energy (see RDH's part of the Course).
quicksand might form at the down stream end of the obstruction.
2.17 Uplift on Obstructions
![Page 22: ENV-2E1Y: Fluvial Geomorphology: 2004 - 5 Slope Stability and Geotechnics Landslide Hazards River Bank Stability Section 2 - Water Flow in Soils N.K. Tovey.](https://reader036.fdocuments.net/reader036/viewer/2022062619/55160b8555034694308b50cc/html5/thumbnails/22.jpg)
Water IN
z
h
2.3 The Permeameter - (Constant Head)