EnterpriseOne Xe Manufacturing and Distribution Planning … · 2006-04-25 · Manufacturing and...
Transcript of EnterpriseOne Xe Manufacturing and Distribution Planning … · 2006-04-25 · Manufacturing and...
EnterpriseOne XeManufacturing and Distribution Planning PeopleBook
September 2000
J.D. Edwards World Source Company
7601 Technology Way
Denver, CO 80237
Portions of this document were reproduced from material prepared by J.D. Edwards.
Copyright J.D. Edwards World Source Company, 2000
All Rights Reserved
SKU XeEAMP
J.D. Edwards is a registered trademark of J.D. Edwards & Company. The names of all other products and services of J.D. Edwards used herein are trademarks or registered trademarks of J.D. Edwards World Source Company.
All other product names used are trademarks or registered trademarks of their respective owners.
The information in this guide is confidential and a proprietary trade secret of J.D. Edwards World Source Company. It may not be copied, distributed, or disclosed without prior written permission. This guide is subject to change without notice and does not represent a commitment on the part of J.D. Edwards & Company and/or its subsidiaries. The software described in this guide is furnished under a license agreement and may be used or copied only in accordance with the terms of the agreement. J.D. Edwards World Source Company uses automatic software disabling routines to monitor the license agreement. For more details about these routines, please refer to the technical product documentation.
OneWorld Xe (09/00)
Table of Contents
Overviews 1–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -���#������"�� $' ������������������������������������������������������������������������������������������
-���#�����"�����#�����������#�+����#��"��2 ���"�� $' ������������-����#��(�#"��3����������#"#"���(����#��� $'$4������������������������������������������
2 ���"�����#�������"�� $'$!��������������������������������������������������������������������������
)���������������"#��2 ���"�� $'$!������������������������������������������������������������5�#�"� �2 ���"�������#"�� $'$���������������������������������������������������������������������#���-�#���#"�� $'$���������������������������������������������������������������������������������������������������# $'�$��������������������������������������������������������������������������������2 ���"�������2����#"������"�����# $'�$������������������������������������������������2 ���"�������#� �6�"����� �#"�� $'� ����������������������������������������������������������. ��+��5���+��#�"��������"#".�#"���2 ���"�� $'�4����������������������������5��������"�� $'�!����������������������������������������������������������������������������������������
)���������������"#��2 ���"���78 9 $'�!������������������������������������������5�#�"� �2 ���"���78 :9 $'����������������������������������������������������������������������
Prerequisites
Prerequisites 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ;���#���"���-����#��������� ������5��������# �' ����������������������������
;���#���"����� ������5��������# �':����������������������������������������������;���#���"���1����#"�� �'4����������������������������������������������������������������������������
1��#����+�#���1����#"�����#�� �'!��������������������������������������������������������1����#"���<��� �����5�#��� �'�������������������������������������������������������������
6�#�1"# �'�������������������������������������������������������������������������������������������������1����#"���5�#��� �'%��������������������������������������������������������������������������
�������2�##�� �'$����������������������������������������������������������������������������������������"=����"�� ��������2�##�� �'$ ������������������������������������������������������������
1����#�(������ �'$ ������������������������������������������������������������������������������������1����#����"���#"�� �'$:��������������������������������������������������������������������������1����#"���2��� �'$:������������������������������������������������������������������������������������� ��#"���#���1����# �'$&��������������������������������������������������������������������������
5����(.� �#�����"�#"�� �'$&������������������������������������������������������������������5�#����$��2����#�����<�#�>�� �'$!��������������������������������������������5�#����:��5��"���(����� �'$!��������������������������������������������������������
2����#��+�(������ �'$���������������������������������������������������������������������������5�#����$��2����#�����<�#�>�� �'$%��������������������������������������������5�#����:��5��"���(���������?�: �'$%��������������������������������������������
��. ��;���.��1����#"�� �'����������������������������������������������������������������������
Manufacturing and Distribution Planning
OneWorld Xe (09/00)
;���#���"���2�� � �2���"�� �'�$����������������������������������������������������������������
Capacity Planning
Capacity Planning 3–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . )��"��"�����*����#� '4��������������������������������������������������������������������������������
��#��"�"���(��" �. �������"#� '$$��������������������������������������������������������������������
8����#"���)������;�"#�(�#���#"�� � '$$����������������������������������������������)������;�"#��� �� �#"�� '$�����������������������������������������������������������������
2���"�����#"���+��)�+���)������;�"# '$�������������������������������������)��""���)������;�"#�5���� � '$:����������������������������������������������������������
2���"�����#"���+����*����#��)������;�"# '$!��������������������8����#"���)������2�+" � '$%������������������������������������������������������������������������
8����#"���)������2�+" ��(�#���#"�� � '$%������������������������������������������2���"�����#"���+��)������2�+" ��)������#"�� '�$����������������
��+"�"���)������2�+" ��5���� � '�$������������������������������������������������������8����#"���)������)�@�"����#�2 �� '�4����������������������������������������������������
2���"�����#"���+��)������)�@�"����#�2 ���"���7) ��9 '�!��������������������������������������������������������������������������������������
)��"��"���)������)�@�"����#�2 �� ' $����������������������������������������������������
)��"��"����"��#���8����+��))2 ' $������������������������������������������������������2���"�����#"���+�������"#��5����������� ' :��������������������
)��"��"�����*����#��<����+��))2 ' :����������������������������������������������������2���"�����#"���+�������"#��<��� ' &��������������������������������������������
)��"��"���2�"��������"� ' &������������������������������������������������������������������2���"�����#"���+��2�"��������� ' �����������������������������������������
)��"��"���5�������#�" ' �����������������������������������������������������������������������2���"�����#"���+�������"#��2 ���"���5�����)��""�� ':�����
A� "��#"���)������)�@�"����#�2 �� ':�����������������������������������������������A� "��#"���5�#�������� � ':$��������������������������������������������������������������������������
8����#"���)�������#������"#��2 �� ':���������������������������������������������������2���"�����#"���+���)20)��2�2 ���"���)������#"���7) ��9 '::��)��"��"�����*����#��<����+��)��2 ':4������������������������������������������������)��"��"���2�"��������"��+��)��2 ':&������������������������������������������������)��"��"�����*������� ��+��2����#"����#�#� ':���������������������������������
2���"�����#"���+������#"����"��#���-�@�"� ':%����������������������)��"��"���)�#�������� ��������*����#��<��� ':%������������������������������
2���"�����#"���+����*����#�������� ��)��"�� '4�����������������A� "��#"���5�#�"� �)�@�"����#�2 �� '4 ��������������������������������������������������������
8����#"��������"#��)�@�"����#�2 �� '4:����������������������������������������������)��"��"��������"#��)�@�"����#�2 �� '44����������������������������������������������
)��"��"����"��#���8����+���)2 '4&����������������������������������������������)��"��"�����*����#��<����+���)2 '4&��������������������������������������������)��"��"���2�"��������"��+���)2 '4!��������������������������������������������)��"��"���5)2���*������� �����#����"��#���<"# '4!������������������)��"��"���5)2�)�#�������� ��������*�����<��� '4�����������������A� "��#"���#��������"#��)�@�"����#�2 �� '4%������������������������������������
Table of Contents
OneWorld Xe (09/00)
Master Production Scheduling
Master Production Scheduling 4–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ;���#���"����"���1���������#����"�����"� :'4��������������������������������������
���#�(���"���1�����)� �B :'&���������������������������������������������������������������#�(��#����"�����"���� �� �#"��B :'!������������������������������������������
�=��� �3����"���(��" �. ���� �� �#"�� :'��������������������������������������=��� �3�(��" �. ��#��2��"���� �� �#"�� :'��������������������������������=��� �3����� �#"���(��" �. ��#��2��"���� �� �#"�� :'%����������
8����#"����"�� �C<��� �5�#�������� � :'$$��������������������������������������������������
8����#"�����5�#�������� ��+��( �-#�� :'$$������������������������������������������2���"�����#"���+���)2052�05)2�7) :��9 :'$ ����������������������������������)��"��"���-#���+��D�#������� :'� ������������������������������������������������������������
2���"�����#"���+��D�#��������)��"�� :'�&����������������������������������8����#"�����5�#�������� ��+���� ��#���-#�� :'�&��������������������������������
)��"��"���#����"�����"� :'�!����������������������������������������������������������������������������
�)2�E���#"#������ :'����������������������������������������������������������������������������52��E���#"#������ :'�%��������������������������������������������������������������������������
2���"�����#"���+���)2052���"�����"��72 :$ 9 :' ���������������������������*"����"#���)2052����#��# :' 4��������������������������������������������������������������������
��*"����"#��5���� :' &����������������������������������������������������������������������������)��"��"�����#�" �5���� :' !��������������������������������������������������������������
2���"�����#"���+���)2052����#�" �5�����)��""�� :' ���������������2���"�����*�����5���� :':�����������������������������������������������������2���"���2����������5���� :': ����������������������������������������������2���"���5�����+����2 ���"���1��" � :':!������������������������������������2���"���5�����(�#���#"�� � :':�������������������������������������������������2 ��"���5��������F� � :':������������������������������������������������������������������ ��"���5���� :':%������������������������������������������������������������������������������
(��"�����1��G�������#����2��������� :':%������������������������������������������(��"�����1��G�������#������*���� :'4$������������������������������������������������
;���#���"���1����#�������#"�� :'4 ����������������������������������������������������������
2�#������"���6��*�# :'4:����������������������������������������������������������������������2 ���"���F�"G����"���2�"�� :'4:������������������������������������������������������1����#�������#"����� �� �#"�� :'44��������������������������������������������������
2���"������ :'4!������������������������������������������������������������������������������������������
2���"�����#"���+����*�����8����#"�� :'4!������������������������������*"����"#��5� #" ��� �5�#�������� � :'&$��������������������������������������������������
���#�(��2 ���"���6" B :'&$���������������������������������������������������������������������������=��� �3��=� ��"���2 ��������� :'&�����������������������������������������������
��##"���;��1��#���2 ������2����#��� :'&:����������������������������������������������8����#"���5� #" ��� �5�#�������� � :'&4������������������������������������������������
52�0�)205)2�2�� � �2���"�� :'&&��������������������������������������������������
Material Requirements Planning
Material Requirements Planning 5–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F������>���;��6" ��+�5�#�"� �"��5)2B 4'����������������������������������������������#�(��#����"++������.�#�����5)2�����52�B 4' ������������������������������
Manufacturing and Distribution Planning
OneWorld Xe (09/00)
F������>���)���5)2��++��#"�� �B 4'4��������������������������������������������������������8����#"���5�#�"� �)�@�"����#�2 �� 4'!������������������������������������������������������
��*"����"#��5�#�"� �)�@�"����#�2 �� 4'$$��������������������������������������������������
)��"��"���5)2��"�����"� 4'$$��������������������������������������������������������������������)��"��"���2 ���"���1��" "��+��5)2 4'$�������������������������������������������������������*"����"#��5�����+��5)2 4'$ ������������������������������������������������������������
)��"��"���5)2���#�" �5���� 4'$:������������������������������������������������������2���"�����*�����5�����+��5)2 4'$&������������������������������������2���"���2����������5�����+��5)2 4'$&������������������������������
��*"����"#�������� "���-�+���#"�� 4'$&��������������������������������������������������)��"��"���5)2�2���"��������� 4'$!����������������������������������������������������2���"�����#"���+��2���"���-�@�"� 4'$�������������������������������������������)��"��"���5)2����� ������������ 4'$�����������������������������������������������2���"�����#"���+������ �0�������-�@�"��72:��$9 4'$%������������)��"��"��������1 �����*.�����+��5)2 4'������������������������������������2���"�����#"���+��5���+��#�"��������� "�����*.���� 4' ���)��"��"���<���#"���+��5)2 4' $������������������������������������������������������������
2���"�����#"���+��6" ��+�5�#�"� �-�@�"� 4' $������������������������������������A� "��#"���5�#�"� �)�@�"����#�2 �� 4' %��������������������������������������������������������
2���"�������+��5)2 4':$����������������������������������������������������������������������������
Manufacturing and Distribution Environments
Manufacturing and Distribution Environments 6–1. . . . . . . . . . . . . . . . . . ��*"����"#��6�#���2 ���"�� &' ������������������������������������������������������������������������
)��"��"���6�#���6" ��+�5�#�"� &':����������������������������������������������������������2���"�����#"���+��6" ��+�5�#�"� �)��""�� &'&��������������������������
8����#"���52��+��6�#���6" &'���������������������������������������������������������������)��"��"���6�#�����#��#�+���52� &'$���������������������������������������������������������
��*"����"#��2����2 ���"�� &'$ ��������������������������������������������������������������������
8����#"���52��+��#���2����-���#� &'$4����������������������������������������������)��"��"���2������#��#�+���52��8����#"�� &'$4��������������������������������
��*"����"#��)���#"#"���2 ���"�� &'$%����������������������������������������������������������������
8����#"���52��+��)���#"#"���-#�� &'��������������������������������������������������������)��"��"���)���#"#"�����#��#�+���52� &'�$������������������������������������������������)��"��"���)�#�������� ��<��� &'�:��������������������������������������������������������������
Material and Capacity Planning Setup
Material and Capacity Planning Setup 7–1. . . . . . . . . . . . . . . . . . . . . . . . ;���#���"���;���+��5���+��#�"��������"#".�#"���2 ���"�� !' ��������
�����"#��)�@�"����#��"� ���7 0�)9 !':������������������������������������������������)�������#������"#���"� ���7 0)�9 !':����������������������������������������������������)������)�@�"����#�7 0))9 !':������������������������������������������������������������;�"#������7 0;�9 !':����������������������������������������������������������������������������������5����������+���)2��52���5)2������)��2�7 :05�9 !':�����������������������"���1�����)� ��+���)2��5)2������52��7 :0�19 !'4������������������������������
Table of Contents
OneWorld Xe (09/00)
��##"���;��#���2 ���"�����#�� !'!������������������������������������������������������������������
��##"���;������ �������������-�� �"���)� � !'!����������������������������������2���"�����#"���+������ �0�������-�� �"���)� � !'$�������������
��##"���;��1����#�������#"���2�"�� !'$�����������������������������������������������##"���;������2� "���)� � !'$�������������������������������������������������������������������##"���;���#��*"������� !'$:������������������������������������������������������������������������+"�"���#����#��*"��������+��2���� !'$&��������������������������������������������+"�"�����C2����#�����6�C2����# !'$���������������������������������������������������+"�"�������2� "�� !'��������������������������������������������������������������������������������A�"+�"���)���#"#"���)��#"�� !'�����������������������������������������������������������������������#"���<"�������-#���)� �#"���"� !'�:����������������������������������������������������A�"+�"���)�#�������� � !'�&��������������������������������������������������������������������������
Multifacility Planning
Multifacility Planning 8–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ��##"���;��5� #"+��" "#��2 ���"�� �'4������������������������������������������������������������������
��##"���;������ �������������)� �#"���"� �'4������������������������������������2���"�����#"���+��6�����)� �#"���"��)��""�� �'$�����������������
)��"��"���6�����)� �#"���"� �'$�������������������������������������������������������������8����#"���5� #"+��" "#��2 �� �'$ ������������������������������������������������������������������������
2���"�����#"���+��5� #"+��" "#���)2052�05)2�7) :� 9 �'$:����������������*"����"#��5� #"+��" "#��2 ���"�����#��# �'�!������������������������������������������������
)��"��"���#����"�����"��+��#���5� #"+��" "#�������� � �'�!��������������������2���"������+������5�����+��#���5� #"+��" "#�������� � �'����5� #"+��" "#��1����#�������#"�� �' ���������������������������������������������������������
�"�����"��E���#"#������ �' ����������������������������������������������������������������� �� �#"�� �' $����������������������������������������������������������������������������������������
Supplier Scheduling
Supplier Scheduling 9–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ��+"�"������� "�����#��# %'4��������������������������������������������������������������������������
��+"�"������� "�����#��#�-�+���#"�� %'4������������������������������������������������2���"�����#"���+��A����������� ��5�#��)��""�� %'%����������
��+"�"�����"����#�2�##�� %'%����������������������������������������������������������������������+"�"������� "���� "#�2����#��� %'$ ������������������������������������������������������
8����#"������� "�������� � %'$!����������������������������������������������������������������������
2���"�����#"���+��8����#"������� "�������� ��)���#�7) ::�9 %'$�������������������������������������������������������������������������������������������
)��""������� "�������� � %'�$��������������������������������������������������������������������������
2���"�����#"���+������ "�������� ��)��""�� %'�:��������������������)� ��"������� "�������� � %'�!������������������������������������������������������������������������
2���"�����#"���+������ "�������� ��)� ����8����#"���7) ::$�9 %'����������������������������������������������������������������������������������
2"�#"������� "�������� � %' $��������������������������������������������������������������������������
2���"�����#"���+������ "�������� ��2"�# %' $����������������������������
Manufacturing and Distribution Planning
OneWorld Xe (09/00)
Appendices
(�����"=�(3�(�#"���5���� ('$����������������������������������������������������������������������
(�����"=�63����E��#�-�#�+��� 6'$������������������������������������������������������������������
-�.�����5���� 6'�������������������������������������������������������������������������������-�.������������"G������# 6'�����������������������������������������������������������
��##"���;����#���=��#����#� 6':��������������������������������������������������������������##"���;��1 �#�1" ����C)�+����� 6'$:������������������������������������������������������##"���;��2���"�����#"�� 6'��������������������������������������������������������������������##"���;��;���5���"�� 6'�4����������������������������������������������������������������������
2���"�����#"���+�������5���"���)��""�� 6'�!������������������������������##"���;��8���"����#��-#���5���"�� 6'������������������������������������������������
2���"�����#"���+��8���"����#��-#���5���"�� 6' ���������������������##"���;��)�@�"����#�+��)��������+"�"#"����=��# 6' ������������������<�����"�����#.�������.�#���;6� 6' 4���������������������������������������������������=��#"���2 ����������#��#������E��#�55 6' 4����������������������������������
2���"�����#"���+��2 �����������=#��#"�� 6' &������������������������)���"�����#.�����-#���6� ���� 6' !��������������������������������������������������������
2���"�����#"���+���=��#�-����#���6� �����#�����E��# 6' !����������������������������������������������������������������������������������������
)��"��"���#���2���"���<�� 6' �����������������������������������������������������������������
Index
1–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Overviews
��"���#"������"�������"���"�+���#"����.��#�#�������+��#�"�������"#".�#"���"���#������� ���"�+���#"����.��#������ ���"����#���"��#������+��#�"������"�����#�����#��
����"������"#��+�#���+� ��"�������#�3
� -���#������"��
� 2 ���"�����#�������"��
Manufacturing and Distribution Planning
1–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
1–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Industry Overview
��"�����#��"�#����������#��#���"���#��������#����"�#����"#�����+��#�"��������"#".�#"���� ���"����-�����"#"����#�"�����#����# "������ ���. ���"�����#�#����+"=�����#����"�����#���������#������������ �#"���#������-����#��(�#"���
����"���#������"������"#��+�#���+� ��"���#��"�3
� -���#�����"�����#�����������#�+����#��"��2 ���"��
� -����#��(�#"��3����������#"#"���(����#���
Industry Environment and Concepts for Enterprise Planning
��#��"��� ���"���"����"���#��#���������#��+�� �����+��#�"�������"#".�#"���"���#"���-���"#�� �������.�"�������������#���#������#��+� ��"���+�������#� �@��#"��3
� ����"������������"��.�"��B
� ���#������#����������������������B
� ���#���� ��������������������B
� F������������������������ "��#������� B
���������"�"�� �3�� ���"������������ �����#�����#����=���#"����+�� �����������"����#�"���.�#�"�� "#"������"�+���� ���#"�"���#��+������#��"�H�./��#"�������#�������"�+���#"������������#"������"G�#"���"������ ����I( �������"G�#"��������#�����#��"����������������� �������#�����#��������+��������"G�#"��H�� ��������++��#����#�������"G�#"���
Planning Across the Supply Chain
F�����#��"��� ������"��#�����#���������#�����++��#"�� ��� ���"��#����H� �.� ���*�#���������"++���#��-��#�����#����#��"������� +C�++"�"��#�"���������#�����"G�#"������#��"����������""������.�"�����������#�����������+�#���#���#���*�#��6�#��������#��#�����*�#� �����#����� �������������#�������������� #����#��������������������"�������#"�� ���#"�"��#��"��������*�#�
���������#������+" "������*�#���� �"��������*�#"���#�#��"�����#�����.�"������#"���+����#��"��#��#�����"����.��#������#"����A"��������
Manufacturing and Distribution Planning
1–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����"�������#"#"���"���� ����� "�"#���#��"���#���"��#���"�������.�"���"�"#���#������#"#"����� �.�"������#����"���#��"���#"�����������#��"#"��"#�������#�����#�#��������#"#"���"���"���
����������#"����+�.�"���.� "����#��#�"#�����#��"��#�����#��������+#"����F�������"��"+"���#�#����� ��"�� �����������#������+�����.�"�����"+"��#"���#��������#������*�. �������"��#��� �#��#���#"�#�����#������"�#��#���#���#�C+"#����#���������� ��"�� ������������"��#��#������"+"��#"��#��#���#��"���@�"���1���=��� ���#��������.����"��������#��"����#��������+"������������ �G��.�"�����#���"#�������#����������������#�����#� ������+������������"#���� #"� �������#������. ���+������ "�"���"�� ���� �� �#"���#���� #"� ������+" ����"#����� �����������"#��#��"����������#��
����#���J.�"���������"#�H������������.���+��� �.� �.�"�������� ��#��#�"���#����C�"���"��� ��#���+����"�� �C�"���"��� �������"������#�#���"��.�"���+��#��� ����#�����"�� �C�"���"��� �������"�������#�"������#��"�.�"��������#"���#��"�� ������.������"����+�#��"�.�"��� �#"���"��
����������+��������������������.� ���"����+�#������������#�+���#"��.�#�����"�#��� ������=#��� �����"G�#"����(����#��"��#��#�����+� �.� �����#����+���#"���"��� C��"#"�����"��#�����*�#� �������"�.� �����"���"�����.������+� �������"���#������ �����"�����"���"�� ����#��+� ��"���+���#"��3
� 2����"��������"��
� �����������+����#�� ���"��
� -����#������������#"���� ���"��
� �����������������#
� �"#".�#"�������#����#�#"��
� (�����#"��
� ��#������"��
���������#��"�� ��*�� �� ���#�����#���������"�+���#"����"#�"��#��"#��#������#��"��� ������"��#��"�+���#"���#����#"�"G������#"������"����*��"�+���#"�������". ��������#��"��.�����"���5�*�#������#"#"���"���.�"����#����� �G������#�����������#��"�.�"�������#"��������������#��#�������"����*������++"�"��#�����#���#�����#��*������������.�"����������5�*�#���#"�"#"���++��#�#���.�##��� "����+�� �"��� �������"G�#"������������"�#���#�������"�+���������"G�#"���.�������#������#����.���+"#�+���������#��H�*��� ���������*" �����"���"�+���#"��� ����������������#��� �����������#�������++"�"��# ������� ���+�#��"���#���"#����"���#�������� "�����
���"#"��� �������"G�#"�������#���#��"�"�#��� ������=#��� �+���#"���2 ������.#�"����"�+���#"���+��#�������"G�#"�������#����+�������#��"�+���#"���"�#��������#��"������#���"#���#���������"��#"������"��#"��
Industry Overview
1–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+���#"��� �������������� ���#��"�� ���#"������������� ����"�+���#"������"���"����������#"����++"�"������1���=��� �����"��"�+���#"���.�#���������"������"����������������� ���������#����#��������������"����@�� "#���� #�
�����H���#��"��� ������"�+���#"����"#��#��"��=#��� �� �#"���"���(��=��������+�"�+���#"���.�#�������#��"��"����������.�"���#�#����#��#.���+"#�� ��+�#�����#"�"���#�����"���"�+���#"����"#����� "��������#������"���������"#��� �"���"�+���#"���+����#�����#��"���� #�"��"�+ �#�� ���#"��������"������#�����#��#"���+�����*�����+ ��#��#"���"��#����*�#� �����(�"���#"�������+��#�� �#��������#"���#����*�#�����#�����#�+���"���.�"����#���.���+"#��+��� �.��#"���.������� ����
������"��#��#���#"�� ��� ��������� �.��#����#��� �����.�##��"�+���������. ��#��� ����"#���������""����.�#�#����� ��� "�"��#����#���1������������� "���#��������#�����������������#��"������ ������"�#���#������� �������"#�� ���� ���#"�"#"��
(����#����"�� ���3
� ������"��������#����*�#� ���������������@�"�* �������#��� �������#��"��=��#"������"�+���#"�������� ���"���.�����"��
� (�����. ����� �����"�����"������ ��#��#����"#��# ����#�����������#���"�#"���"���������
� 2�#���"������� �����"��.���+"#�+���"���������" "#������"��������+"#�." "#��
� ������"������� C#"���"�+���#"���#����*��"�#� "���#����""���#��#"������#��"�+�#����""." "#��
6�"���������"#"����������.�"���� �#"���"���������� �����#��#�. "�������@�"��#"������"�#�������������������F��������� �.��#"���� "�������=�� ��#��#������"���#���#�+����#���#��"��.������"#�� ��#�����#��"��#��.������� ����"����������*�#� ����
�"++���#� ��� ��+�� ���"������"���"�+���#"���#��#�"����"+"��#��#��� ��� �����"�+���#"���"�.�������#��������#��+���#�" �����#���#"���+����#��#�������"G�#"������"��"#�� ���"�������������"�� �� ���� ��� ��+�� ���"��"������#��������#��+���#�" ��@�"���+��� ���"�����������#��#"���+�����#"�����"G�������� ����� ���"��� ��� ���#�����#�#������ ��+�#�����=#�"���� ��� �� ����; #"��#� ���#��� ���#�� ���"��� ��� ������#���� ���#��#�����"��������#�#"���+�������������� "���#������ ��+������#��"�H�"�"�� �� ���
Manufacturing and Distribution Planning
1–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+"#�#��� ��� ��+�� ���"���������".���"��#���+� ��"��� "#3
���������������� �����"���#� ��� ��+�.�"���� ���"����#�#��"��� ����"
#�����# "����+������#��"���(�#�#��"��� ��������#��
@��#"�������#����� "�������#�#��"��� �����+"���#��
.�����"���+�#����������H�.�"���� ������
��������#��#����������H��""���#�#����#���#�#��"�
� ���"���"�����=���#�#"����+�����������#��"���" �.�
"��#�������������#�#��"��� ���"���������/��#���������
������"�#��#���+�#���������#"���.�����""����
��� �
�������������� ���#"�� �� ���"���"����"+"���������"#��+�������#�" ��
#����#�#��"��� ���"����-#�"�#���. ���"�#��+������#��"��
����"#�����#������ ���"�����#�" ������#"�����"G���"
��� ����#���+��"�#��#���+�#�����#���#�#��"��� ����(
#��#"�� �� ��������#���@��#"���KF����" ���
��#��"�������� "��#���#�#��"��� ��BL����#"�� �� ���"��
"�#���+"#� ��� ��+���+"�"���#����"��#"���#��#�#����"
��������#�*��#�����#�#���#�#��"��� ���"������ ����
���"����#������ ��+������#��"������ �������#�����
@��#"��������3
� -����������������"�������"G�#"��B� -���������������"#".�#�B� -������������������+��#��B� -+������������"����"#".�#����������+��#�����"
����"#".�#�� �������� ������#�#������#���B
���#"�� ���� �����������#��"�H�+����+������"��� �
�"��C������J��� "�"#H�� ���"��������#"���#����+"�"��
���"+"�������� "����#�#��#�����#�#�#��"��� ���"��
��� ������� ���"�����"G���+��#��#"�� �� ���"���"
#��"�� ������ �����"��#���+�#�����������"#� ����""��
��������"��#�������#�#"���+����������������� "���
�#��#�����������#��+�#���������+���������������#"��
� ���"���"�#����"���#C ��� M�"#�.� �������� �����
��������@�"����#�
(+#�������#��"����+"���.�#��#�#��"������#��#"�� �� ����"#��+"���"#�� ���"#��#���+� ��"���� ���"����#��3
� 2"�"#��2 ���"��
� �����"#��)�@�"����#�2 ���"��
� 5� #"+��" "#��2 ���"��
� ���� "�������� "��
Industry Overview
1–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Priority Planning Systems
2"�"#��� ���"�����#��"���#���K���#L�����#���K����L�+������+��#�"�������"#".�#"�������"G�#"�����=��� ���+�������"�� ���������#�������������"����2"�"#��� ���"����"��������#��"��#�� �#������� �����������#�.� �����*���������/��#�����#������������������"��#�����"���#����#"����@���#"#���+������#�#��#�����*�#� ����"����"���#��#�+����+���*�#"���+���#"���"�������#��"��������=���#�#"���+���� ��������*�#"����#�.� ������"#���������#"��������"#".�#"�������"G�#"��H��." "#��#�����"�������#������������"���
A�"��� ��� ��+��"�"#��� ���"������. ������������#��"�� ����#����""���#��#����#���� �+�������#��"���"#���� �����"�������"#���#�����<���C#����� �"�������#"���� ���"�������#���+� ��"���� ���"����#���+�������� �#���""���+�������#������#"��������+� ��"���#��"�����".��#��������+��"�"#��� ���"��3
� 2����#"���� ���"��
� 1����#"��
� 5���+��#�"��������#"�������� "���752�9
� 5���+��#�"����@�"����#�� ���"���75)29
� 5���+��#�"����=���#"����#���75��9
� �� ����������#"���� ���"���7�,�29
Production Planning
(������#"���� �������#�#��#"�� �����#�#��"��� ���"������ ������ ��� ��+��#�" �"��������#���#"�����"G�����������2����#"���� ���"����������+�����+������#��#������ ����������������#"���� ���"���"����� �#�����"+"��������" �. ��+��#���#�����+�����"#���#��#�#�����#��"���"��#�����#�����2�/��#"�������������#��#����� �����+������#�����"���#���++���#�����5�*�#�.������*"����+��#���"�" ��"���#"��������#��"���#����/��#��� ��� ��+��������+��#�����#��"�H������#������������"����-���*�#�.������*"����� ������"��#��*�#���+� ��"���@��#"��3
� ������������#��#"� ���#���B
� -������*�#� ���� ��� ����"��� ����� �.� B
� F������������#"�"��#��#�����#�����������+����������#������"��B
2 ����������#�#�"� ��� ��+���#�" ���/��#"�����+����#�#��������*�#��������(#�#��������#"���� ���"��� ��� ��������"��.�������������"������#"#"���������"������������ �#�����#"+����#������������������."��#"����+�+����#"������������#"���� ���"���� ��������#��"��#�������"#�.�"���#�����#���*�#��������
Manufacturing and Distribution Planning
1–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Forecasting
1����#����#������ ����+���*�#��������+�������#��"�H���������"����2 �����.���#��"�+����#����#���#�#"#"�� �� ���"#����+��������#������#� "������"�" �������#������� ���+����=#��� �"���#��"�+���#"���
�����#������+����#"�����������"���+���������� ���������#�.���=��#�� ����������#�������#��+����#�+��#��"���#��"��#��.�������#"#"���"��#����*�#���#�#"#"�� ���#������� �.��#"����*��� �������������������#�#�� "������+����#���������
(����������"#����+����#�� ���"�.�##���������#���������"#�����+����#� ����(����#��"���"#����.�"���#�#����"�����#"��������"#����� ����������+���#"����������+"���������������������� �������"�����(���#��"���"#���#���.�"���#�#���������� �����#�#�����������#�����������#��"��#��#����"#��# �����#�#���������������. ��#��������@�"�* ��#��������"����*�#����������+#����#����������"++"�� #��"���"��"��������#��������*���"�������#���#����������� ��"*� �"�������#��#����
Master Production Scheduling (MPS)
5�#�������#"�������� "���752�9����"#".�#"���������� ���"���7�)29�"#�����=#� ��� ��+�#���� ���"���#��#����52��"�#���."����.�#������ ���"����/��#"�������� ���"����=���#"����52����+"��������#�+��" "������#���#"����"G����������#�����*��������#���2 ���"����#�#���52�����)2� ��� ����#�������"���� ��� ��+�� ���"����(#�#�"� ��� �����"+"��� ��������#�"�� ����#�����"������������"���.�"�����*�#���
52�����)2����"������#�#���.�"������#����������"���������" �. ��������#�� ����#���#�.����@�"���#��+� +" ���#������������52�� "�*"�+���#"���+���"����#������"#".�#"�����#"�"#"��#��+"�� ������#"����"#".�#"�����#��"�����52��#����#��"����@�"��� ��� ��+�"����#�����" �����+��#�"���������"�����52��#����+"����� "���. ���������������#��52�����"���#"+�����������#������� "���. ����"���������#��������"#����52��"���"�#�#��������+��#���������#�+�����#�� �����/��#�����#������������)2���+"���#���"#���#��#��������"G�#"����������#������"#�"#".�#"����������)2����"����""." "#��+��#����� "�����+�"#���#�������##�����#��"������� #"��#� ��#��#�����#����
Material Requirements Planning (MRP)
�����#���52��+��#���+"�"���������#�"��#��#����#������#��#�"�+���#"���#������#�� ���C ��� �� ����+�#�����������#��@�"���+��#���+"�"���������#�2 ���"����#�#�"� ��� ��+���#�" �"��� ���5�#�"� �)�@�"����#�2 ���"���75)29�2 ���"�����"G������"�����������*��5)2�� ���"�������#�������"��� ��� ��+�� ���"����������#�#�"� ��������������#�" ���� ���"��� ��� ����#����#"+��#"���������*�#���"#"�������"�����./��#"���
Industry Overview
1–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5)2��������������#���������������C�#�. "����� �#"���"���.�#�����#�����������#�����#�����������#��@�"���#����*��"#��5)2������." ��+��#�"� ����"���"��� "#��+���#�"� ��"#������"�� �� �#"���"��#��#�����������#������� �������#��"���#����� �� �#"���+�����"+"����������#�.������#����������+��#����� "���. ���5)2�� ���"��������#��#�#���������"#���������" �. ����������������#��������������
Manufacturing Execution System (MES)
����+"�� � ��� ��+�����+��#�"���� ���"���"�#���5���������5���"��������#�" �����"����+�5)2��-��5����#����#���� ���#����=��#�"#���� ���#"������������ ��+�������#"�����#"�"#�������#"�����"G���"����������#��#"� �����������"��#���+��=���#"���#"��������5���� ���"�#����� C#"�����#"�"#"��#��#�����#��"�������� "������#�������+ ������"�� ������"������"��#��� "#��"����"�#���#��+��"�"#"��+�������������#��#��++��#������#��"��"������"+"��#"���+����
Sales and Operations Planning (S&OP)
�� ����������#"���2 ���"���7�,�29��������#���#��"��� ���"�����,�2 "�*�.�#������ ��������*�#"����"#������#"����-#�� �� "�*������#��"�H#�#��"��� ����� ��� ���������=���#"���� ���+�������#��"��������./��#"����+�,�2�"�#��������"��#������"�#���#������*�#"���� ���#��#�"���#���C+������"#�������� ����#��+�#������ ��� ����5��������#������� �����#� �����#"��#����"���#����,�2�������#������� ������#�������" ���"��"#"��.�#������� �������������+��#�����#��"�������#�+��" "��
Capacity Requirements Planning (CRP)
1� ��"����"�"#��� ���"���������#��"����� ���� "��#��"#�� ���#���#�. "���#"��C����������+��������(����#��"����������"#��� ���"����#���#������#��#�"#������������#��������#��+���*�"���#"+"����"#��#����"�"#�� ���"����#�����)2���� �G�������������������� ���@�"����#���#�� "���������� ��#��"�.� �����.�#�����#����@�"�������������#�������#��+����������" �. ���(�� �������#��"������#���#����"��++"�"��##"���#����@�"�������������.�������#������ ��#"����#���"#".�#��#����* �����������#����="#"���������
Resource Requirements Planning (RRP)
����#"�����"G�������+����#�+���������#"���� �������.������ ������(� ���������������@�"����#�� ���"���7))29�#����#��"���"+������#��"����#���������#������#�#��������#�����#�����+���*�#��#�"������ ���;"���))2�������#��"���=��"�����������+����"#� ��@�"����#��+��" "#�����������������"#"��� ����������.�" �"������������������� ��������������"��������#����"�"����2�/��#������������#��"�� �� ����"������������#�"�#��"����(����#��"����#�� ����� ��#��#�����"��� ��� ��+��#������"������#��"�����#�"�"�+���#"���#����#��"���#����=��#�������������#������#�#������"+"��+���#"����1���=��� �����#��
Manufacturing and Distribution Planning
1–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����#��"��#���#����#������� ��� ��+������������������#� "���2 ����������� �� �#�� ��� ��+��=���#��������#"���"�#��#��������#"���� �������� "��#��#����.��))2�
Rough Cut Capacity Planning (RCCP)
(+#�������#��"����/��#�#�����#�������#"�������� ������ ��������������#������"#��� ���"���7)��29�#����#��"���#�������+ ��� ����#��(���#��"�� ��*��#���*����#�������#�� �/�.��@�"����#����������"�����"������� ������"�#�����"����#�����������+ ��� ����#�"��#��������������#� ��� ������+����#����������� "��#"���"�� ���������.��� �"+"��#"���(����#��"����� �G��*���+��" "#"������#�"�#�����#��#����#� �#��� ��� ��+��+���������������#�"�#�*" ��(����#�"�#��"#�"���������#"�������"�#�� ��� ��+���#��#�#��#������#��"�������� "����#��������#"�������������#�� ���.�����������)��2��� "��#�����#��������#��"������������ "����� �������* ����+���52���#������#�"�#���"�#��(�/�#���#�#�������"#��"�� �����.�#�����#� "�"#���#���#���+� ��"��3
� -����"������" �. ��������#������#�����@�""#"����+������@�"����#�#�� "������+��" "#������
� F""���#�����������������"#�"����#"�����"G��
-+������#��"�������#���@�"��#���*" ����@�"����#��#����"#������#�����##������"�#���52��� ����(������"G�#"��������@�"����������#���"��� ��� �+�#���� ���"����#���#���������#��������#�#���"�.� �����.�#�������� ������������
�)2��� "��#��#���5)2������ ����)2���� �G��������#��#������#��"������#������#�5)2��5)2�������#�+������� ��� ��+������#"�����)2���� �G���*����#������������������#��"�������"�.� �������"#��#�""�+���#"���������#��"������"�� ����#�� �#"���������� ��"���#�����* ����#����#���������++ ���"�����*������@�""���#�� ����������� �
������"�"#��� ���"����#���������� "��#"����#���#��#�"����"+"��#��#��� ������ ��� ��+���#�" �����#���#"�����"G����)������)�@�"����#�2 ���"��7))29��� "��#�������#"���� ���"������" ��)�������#������"#��2 ���"���7)��29�� "��#��5�#��2����#"��������� "���752�9�������"#��)�@�"����#�2 ���"��7�)29��� "��#��5)2���" ��"���#0��#��#�7-0�9����#"����#����� "��#�5���+��#�"����=���#"�����#���75��9�
Input/Output Planning Strategies
-���#0��#��#�7-0�9���� �"����������+ ����� "��#������*�� ���������"#����#�" ��� �G��#���#�� �����#����=��#�*" ��@�"���#���������"#����1��� #���#"���������" �. ��.������#���#"�����"G���"�"����"�#����++ ���"��� ��������*������� "������#"�������� #"� ���"+#"��������". ����#����#�.� �������� ��������������"������"��
Industry Overview
1–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5����������"��������#����+���#"��#�����������#���#���������#��"� ���"������ ��5�#"���� ��#��"���#"+������"�������#��"��#��#��@�"�"��������#�+������"�����������������+"�"���� ���"����������#���������#"�����"��������#�#�������#�#�����#"����� �����"���������"��� �����������"�"���������++"�"��# ��#��#�����*�#� �����5�#"��"����������#�#���� ��+����#��"��#�����������+������� ��� ��(���#��"�������+����������.��#���������"#�����#�#�#��"��#����*�#� ����#����+�#���#�#���K6�#�"��� �L�.�"��������=���#���#���� ��+���+��������������"���#����"�� "����+���#�������"G�#"���#����������"�#�
Multifacility Planning Systems
5� #"+��" "#��� ���"������#����"@���#��#����. ���������+�����������"G�#"��"�������#��"��#��.��+� +" ���.�����#�������"G�#"����"#�"��#�����#��"����������� "���� #"+��" "#��� ���"����������"�����������#���#�. "��"�#��� ��� ���������������#��*����#��"������� #"+��" "#��� ���"���#��"�#���#���� ���������"��� ����#"��� ���������#"���#� �.�����"��
����#�#��"���="#�+���� #"+��" "#��� ���"��������+"#�#�#�������� "��#��� ��� ��+����� #"� ��������� ���#"���"�#����"�� �����"�"���"#�����"���� "��#�����#���� �������"����� ��"���������#�#�������#�#����#��"��
����������#�#�������� ���� �#"���"��.�#�������� ����������������"G�#"����"#�"�������#��"���(������������"G�#"���� ������������#��� ��"#�������"���#��� ���#�. "����.��#�������"G�#"������"�� �#"��� #�#����"�.�����������"G�#"�����.������ �#"���"��
(�� ���������� �����#� �"����#���#�������� #"+��" "#��� ���"����6�����"����#���"���# �����#��"���������"����#�"������� ��#�.�����"��2 ����������������"����#�����#������#������������� "��#��#��*�������� ��+�� ���"�����������"�#��� �+��" "#��.�������"�#������="#"������." "#"���"#�"��#�����#��"��.�+���� �"����������=#��� ���� �����"���#���.���+"#�+���� ���"�������+��" "#"�������#���"���#�����������#" "G�#"����"���������������"��"����#������#� ��"������������#����*�#�����������������#���#�#����#����
Supplier Scheduling Systems
(��������������������������"���+����#�������"G�#"������"�������#�������#���#�. "��� ���"�������"�+���#"�����#����.�#�������� �"��� "�*��+����� �����"��
���������� "������� "����� ������������"������ "���"#�����"#��#�"��"���"�+���#"����������������+" ��#������#������#"��������� "����2 ���������#"�#���������#��#�.�#������������������� "��#���������� "���#�� ���������#��#�����+#�����+"������. ��*�#������"#��#�. "����@���#"#"��+�����������������������������������+�������� ����"���"#��������� "����#��������� "����������#����#��#����/��#�� ���+�
Manufacturing and Distribution Planning
1–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������+����#�����"���������#"���������� "�����(������"����������.���+"#�"����"#��� "��"��+�������� "������������. �����#��"�������*����"�#C�+C����� "��"��+���#����=��#� ���#"��������#������ "���� "��#��������#��#��������#"��� ���#"���#��#�������������#��-�#�����+��� �"���"����#���#��#�������������+���"��"��#"������#��"������� "���+���#�����"�#��+����
2�#���"�����#��#�.�#�����������"��������"����#������"�����#������������#"��� ���#"��������������#"��C#�C��*�#�+�������#��(���#��"�������� "�C����� "�����#���� ��"��#������� ���"���"�+���#"������.�"���.�����"��������� "������. �����#".�#��#���������#� "���#����� �������� ��#��#��"�"��#��+���*�����"�+���#"�������������� �������������"� ��"�������"��"���#"��������� ��#��"��������#���#"����#���������������� ����#����#�. "��������"��#"��� "�*�#�����������#����������@�"�* ������". ��
Industry Planning
������"���+#�����#���*�����""���"�� ��#����"��� �#"�����"G���������"��������"��#����H���*�#��@�"������������#��.������+ �=". ������#�������������#��� ���"�����#��������#�����#"����� �����"����������". ��������"����������#��"�� ����#�����*�C#�C�������"�����#�"�#�����+��"�#�"�"�������*�C#�C#��*���" �������5�*�C#�C��������+��#�"�������#�� ���#"��#����#�������������������"���#��� ���"������#�������"��#���"#���#�����@��#�"�#�����+�����"���+���������#��"����� ��#"����+"#���
�����"+#�"��+�����@�"������"��������#"�������� ���"������#��"������#���"�"�"G�� ���#"���+�������#����" �." "#��#����������#�+� �����"����(��=��� ���+���#�+� �����"���"�� ���������������"#�#"�����"�������#"�������"���
1���=��� ���@�"�*�� ���"���"�����/��+��#��+��#��"��������#"#"���"��#��� ��#��"��"���#������������#��+�#"���"#��@�"��+�������#�#��.����"��������� �������������������� "�����#��#�����*�#� ���������� ������#�����#��"���-+��������#�#�*��#��� ����"��#���� ���"�������� �����#����������#"����������#��������#"#�������"��#�����*�#�����
����+� ��"���#�. ������"G�������"#"�� �� ���"������"���#"���+����"��"���#"�3
Industry Overview
1–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
������������
���������������������
�����������"�������������������#� "+����� ��
-����"�� ������"���� �.� ������#"#"�����������#��
������ �.��#"������������"����6������#����� ���
���������" ���#����"����+�� ��#��"�������#��������
����"�����#"�����#��#�����*�#��<"+�C��� ����+"#�." "#�
.���������#���"�+ ������"��� ���"���+���"��C#�������
� ��#��"��"���#"���(�� ��#��"��#����� ������#�
�#��������#������������#���������� "����
����+��#�"������#��"���@�"��"�������� ���"���
2�#C��"���� ����������#�"������������+�� ���"��
+��#����"���#"��
������������������ (�#���." ������+��#�������#��"�����#"������ �
���"��������"�������"�" ��������1�@���# ���#��
���"� ������+��#��������#�������#"������""���#��#
+ ������������ �����"��#������#"�������"G�#"����(
#����������� �����#�������#��� "�����+�"�#���#��
��������#��#�"�#�����+�����#����������#��(��
�� #��#����"����#������������������� "��#�����"��
@�� "#�����+"���#"���#���"�"�"G�� ���#"�������
� �#"���"������ �����.�#��������"� ������+��#��
����#��"���� "������� ���#����������� ��� ��+
�� �.��#"�������� "����������"�������#"#"���"��#��
��#���." ��"���#����������������#��"����#����"��
��#C� ����#������"���
���������������������
����������������
-��#�����#��-1(���#��"�������� "�������"��� ��� ��+
"����#���#��*�#���������"����+��=������������"#�
"������������"������#��++"�"���"����" ����"�#�"�"��
�"��� ��� ��+���#�����#"+��#"����-1(���#��"����#
"������#��"�� ���"�����������������������������
��� ��+���# ��"����#���
�������#��"��������������#"��� ���#"���������
��#�����#"���#�#��"��#�������#�#���-1(���� �����"��
���� "��� �#"���"�������������������#��#����� ���
����������#���"#�"��+����� "��� ��#"�������
��������+��� ���C#���� "�����#����� ��#"���#��#�"
"�+ �����������" ��.����������#��"�"�������" �." "#������
�� "��������� "����2�#��"���"����� ��#�����#���-1(
��� �����"��������� �.��#"���"�����"���#��#��
������"����*�#�������������#"���#"������#��"����
��*"���#�������+�����*�C#�C#��*������#"���#�
���. �C#�C���������#"����(�#����� ����"�#�����
���������#�#��#�����*�#� �����-1(�������"������
������+��=���"#���#"��C#�C��*�#�#�#��"����#��"
� ��#��"������#���#���������#��"������#������#��
�����"����#����"��#����"��C#������� ��#��"��"���#"��
-1(���#��"�������"G��#��������+��.�##��� ���"���#�
���"�������#"#"���"��#�����*�#� ����
Manufacturing and Distribution Planning
1–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���������������������� ����#����� �#"������������#"�� �"���#"���������"@��
�����"#"�� �� ���"���������8 �.� ������#"#"������� ��
�����"�����*�#��+�����"�������#����"���#�
��������8���"����������#"�� ��++��#������#"#"������
�@�"�������#����#C����� ���C#���� ���"���
2�������#"�� �"���#"����� ��*"���+�������++"�"��#
����#��� �����#����#� ������������� ��� ����
"�#���#"��� ���� "��"�#��#��"������#� "������#��"�
���"�� ����#"���"����#���� ���"���#��#�"���������.�
#��"�������
�@�"����#�+����������#"�� ������#"���"��+#��
���"� "G��������+���������"#��� ���"���"�"���#��#�
2 ���"���� ��#��#�"�� ���������#��=�"�#"������� �#
"G"������#�"�#�������������������"��#����� ���
� ���++��#���������#"�� �"���#"���-������
�C��������"������+�#������ �������������#"��
"���#"��+����
���������� ���
��������!�����������
�28�"���#"���������������"#��"������������#"�"#�
���������"���#�����������28�� ���"���� ����#
"�� ����������������*��"���"��"#�� ���"���
�28�"���#"��� �����#�#����������#C#�C��*�#����
� "�"��#�����C�� �������������� �����"��� ���"��
���. ���28�������"��#��"������+����#���������+�
����������������� "+�C��� ��#"���#����*�#����������#
#����28���� �����"��#���+� ��"���#����"@�������� ��
#����28�"���#"��#�������#��� ���"���+����#�"� �� �.��
�����@�"����#������3
� ��� +C "+�����������#�#��������������#�.�������=�"�#"�����#�
� 6�������������#�#���������#�����*��������#���"�#�"��"�����������#"�������#��� ��
� J��#C-�C�"��H�7�-�9����������#�#����������#�
����� #"��#����� ��+������#��"��"�#�������#� ��"���#"+������@�"�* �����#��#��������������������#��"��#���� �.� ���*�#� ����������#��"����#�.��. ��#��� ������"�#� "���#�������+���#"������������ ��� ��+�#�����#��"��.�#��"�#��� �������"#��#�������#��+�#����=#��� ���� �����"��
(����#��"����#�.��+ �=". ��������#�������"��#���"#��"#���#����#������#��#�������#"���"��"#�� ��"�#��#�����������"G�#"���#��#�������"��#�������.�"�������" �.��#����#��#����"���#�����#"��� �#"���"���+��������#����#�����"��#��"�� ���"���������+� �����"G�#"����" 3
� 2��"��������#�#��#����#����=�������#�����=���#�#"��
� �� "��������#����#"��
� 2��"����=�� ��#���#������"��������#�"����#�����#"+��#"��
Industry Overview
1–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� 6� �������C#"��������#��� "�����"#��#�����#"�� �����+���#�"� ���������
� -�� ����#�#���������#��+���#��"����#"�"G�#"���#�������#�#������ ����"�
�����#"#"���������*�#���������������������#���+�����+�.�"������#"��3
� ��#� �E�� "#��5��������#�#�� ��"���"�#������+������������#��"��". ������
� �#�#"#"�� ���������#� ��#��*"�����#������������� ���� �"�������#��"����������#"��
��#��"���������"�#���+����"� "G�����#����#���=��"���#��"�����"G�#"���#�"������#��"���*�#�������������#����"�� ����#���+� ��"���������#3
� �#�. "�"����"#�"��+������"G�#"��� ���� #���������"�� ����#"��������#�����#������� #�������#"����#��
� �#�. "�"����"#�"��+����� ��#"�������
� -�� ����#"�����#"�"#"��#���=#���������#��"����� �����"������������#���� �#"���"��+���������#����#���
� ���� ��"���������"�#�"�"�����#��"��� ����������#����" �"����������#���""." "#����������#��+ �="." "#��"�����#"���#����+������������"��#�����*�#� ���
Idea to Action: The Competitive Advantage
����+� ��"����=��� �����#��"�� ���. ���"��#�������+��#�"���"���#���#��.�"�����#"��#��#��#��� ����������. ��������#���"���#"��#��#�����++��#��.���������. ����������������.�"�����#"��#��#���� �����. ��������#������"���#���#�"��+ ��#���"����#���"����.�##��.�"����""." "#����#����� ���#"��������"�����������"�����#����#�����������
"������������������
������������������
����������������#
>������������ "#+��" "#��� ���"���#����+"���." ��+
��#�"� �������#"���+�������+��" "#��+��#�������"#���
�����#����"� �����#�"� ��6�5��������#"���+���
��+"����.�"�����"#�
-�#���#"���"���� #"+��" "#��� ���"�������������#�����
�++"�"��#�� ���"����-#�������"#������.��������*�"�
�����7�-29����"����� #�"����#���"���+����#�"� �
"���������������"��"����#����������#����� ���#"���
Manufacturing and Distribution Planning
1–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
$������������%�
��������������&���
���������������������
��%���������"��#
�������"����#������������#���������������
�����#� ���������"#��# ��� ��������������"G�#"���
����� ���"������"#��+��-2��"����#��� ��� ��6�5�����
��#"���
������"�����"�#�"#��� ���"���#��"������� ���"��
������������"���������""�����*"���������#�����
�-2�����"����#�����"���� ���"���#�������#��#
"����#���"���"#������#��*���������#��*���
�������������������
������%��#
������"������ �������"#���+���#���+����#
�����#"���#���� "��#��"�+���#"���#��"����#���.��"#��
"���#"+"��#"����(��"�#"���� ���"#����"#��+����#"��
#����"@������#".�#��#��.�##��.�"����""." "#��
��#����� ���#"��������"�������+����#���������
��'�������������
�������������
�������������������
��������������#
-�#���#�����#�.������#��������#"��C#�C������
��#"���.��"#����� "��#�����#��*� ���#"���������#"���+�
�����#"��C#�C���� �#"����+������"#���
�������������'��
������������������
�����������
�������#
-�#���#����#���� ���"���#"��#��#��*���������#
+����� #"� ����� "���-�#���#����#���� ��#��*
��@�""#"�����#����������������#�����#"����� �
���"��
��'�����������
���� �����������
�������������������#
-���#"���������"�� �C�#�������"����"#��5��
�#�������"�#�����." "#��� �#"���#����� �#�
"���#"����=��� ��"�� ������*+ �������." "#"�����
���#���"����-�#���#"����� #�"����#���"����.�"��
�""." "#���������#����� ���#"���
��'�����������
����������������
��������'���������
�������(�����
���������#
-���#"������� ����#��.���. �� ��� ��������"��
��������#��""." "#��
��'�����������
�������������������
�����������������
�����)�������������
������������#
-�#���#���+��#�������������� "��)� ���������� "��
����� ���"���#�� �����"�����C��#��"���""." "#��+�
�����#��� ���"����-���#"�������"�������+����#"��
�""." "#��������#��#"� ���#���"����( ���"���#"�����
."������������#�#����*�#�����@�"�* ��
1–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Planning Systems Overview
����5���+��#�"��������"#".�#"���2 ���"����#���"�����#��+���#��"�)�@�"����#�2 ���"��������=���#"���7�)2=9���)2=�� �������#������"��#�����"����#���������#�"� ������ �.��������#���� "��������#������"��#����������������� �����"�� ���C ��������+��#�"����#����� ������������������#��������#"�"G������������������#"������+��#�"�������"#".�#"��� ��"#"�����"�����#���)2=�+��� "G��#�����#"�"#"���+����������������#"���� ���"���
5���+��#�"��������"#".�#"���2 ���"������"#��+�#���+� ��"����#��3
� )���������������"#��2 ���"��
� 5�#�"� �2 ���"�������#"���
Resource and Capacity Planning
)���������������"#��2 ���"���� �������#����������+��". �������#"������� ��#��#��+ ��#������������+����#����������#"�������." "#������)���������������"#��2 ���"����#������"#��+3
*�������*�+���������
���������**��
;������#�" ���������+����#�#���#"��#��#���#"��
����������#��#�����������#����*���������#�+��" ��
*��������������
���������*����
�������#�����#�������#"�������� "��������
�@�"����#�#��#��������"#�����" �. ��"���"#"�� ���*
���#��
>������)��2�#����#��"���"+�������� ����"��#��
��#������� ��#�����#��+��". ����*� ������"�����
#�������+� "�"#���������
�������*�+���������
����������*��
�������#�����#�"� ��@�"����#�� ���#��#��������"#�
���" �. ��"��� ���*����#��
>�������)2�#����#��"���"+�������� ����"��#��
��#�"� ��@�"����#�� ���#�����#��+��". ����*� ���
��"������#�������+� "�"#���������
Manufacturing and Distribution Planning
1–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Material Planning Operations
5�#�"� �2 ���"�������#"������"�������#C������ ���#���������#�"� �@�"����#�#��#�����������#����*���������#��5�#�"� �2 ���"�������#"����� �G���������+���� ���������#"����"�� ��"��3
� ���#� ������#� "#���"#".�#"������#�������������
� -#�������+��#����"��.�#���"��#��������������"�����#
� ���"���C#�C�������#��#���"#��
� 5�"�#�����������"����������#"��� �"#���+��� ��#������@�"����#��"�#������
� ���� "�C��������"����#��
����5�#�"� �2 ���"�������#"����#������"#��+3
$�����������
*�+�����������������
�$*��
2 ����������#� �#����"#".�#"����+�+"�"��������
.�����������������-�����"#"�����)2����"��
���#� "G������#� ��+��"#".�#"���"����#�"���������#�
������"��#����� ��"����#�� ���
,���������������
�����������,���
���#��������� ���+�"#�������@���#"#"��#��#����������
�=���#�#������+��#���
,�������*�+���������
���������,*��
;��#�����#�������#"�������� �������������."
�+���#�"� ������"����#��������#���� �� �#�
#"��C��������#��@�"����#�+�������"#�����������#�
��� ���+������"�����#�"� ��@�"����#�
System Integration
����5���+��#�"��������"#".�#"���2 ���"����#���"�#���#���"#��#��+� ��"����#��3
��%������,��������� ���� "��#���.�"��"�+���#"����.��#������"#���7�
"����"��#9����������#����.������"�#"������"#��+
�������#��*"���#��������� ���#"���
�������������
,���������
���� "��"�+���#"���+�����. �C#�C�������
��*�C#�C����"#���
����������� 8����#��� ����/��#"���#��#��������#������ ���#��
��#�������#"�������� ��
Planning Systems Overview
1–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
��������,��������� ;��." ��+���#�"� �������#"���#������� ����*
��#"�"#���"#�"��#���� ��#�
�������������� ;��." ��+���#�"� ����#"����������*����#�
"�+���#"���#���� �� �#��#���#��������#��+����"#���
,������������
����������
;����#"���������*����#��"�+���#"���#���� �� �#�
��#�+�� �.������������������#�"� �+��������"���
��"#��+�#�������#�
�����-����
,���������
;��." ��+���#�"� �+��*"#�����"�������"���������+
�������+����������������+��#����"#���
����������� ;���=���#����� "������#��������������
�� ��"����#���#"���
Manufacturing and Distribution Planning
1–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+� ��"�������"��" �#�#������5���+��#�"��������"#".�#"���2 ���"��"�#���#���"#���#���������������#���
ResourceRequirements Planning
(System 33)
ERPxEnterprise Requirements Planning and Execution
Tactical Plan
Operational Plan
Execution
Rough Cut CapacityPlanning (System 33)
Capacity RequirementsPlanning (System 33)
Finite Scheduler
ManufacturingAccounting (System 31)
Shop Floor Management(System 31)
Procurement (Systems 40 and 43)
Material RequirementsPlanning (System 34)
Master ProductionScheduling (System 34)
Distribution RequirementsPlanning (System 34)
Inventory Management(System 41)
Sales Order Management(Systems 40 and 42)
Forecasting (System 36)
Configuration Management(System 32)
Product Costing (System 30)
Strategic Business Plan
Product Data Management(Systems 30 and 48)
Planning Systems Overview
1–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Terms and Concepts
5���+��#�"��������"#".�#"���2 ���"������#���+� ��"���#�������������#3
.�������������� ������������#������ �#"���"���@�"���#����������
����#�"#����;��." ��+���#�"� �#�3
� 5�"�#�"����������+"���#"���+�����"#����"#���#���#"������"#"��� ���#����.�
� ��+"���@���#"#"���+�"�#����"�#�������#�"��������"#�+���������#���������#������#������+��#�"�������
� ��#��"�" ��"#���.������"���." ��+���#�"� ���#"�������������
*������� ��������#"����@�"���#���������#�������#�"#����;�
��#"���#�3
� ��+"��������#����+�#�������+��#�"���������"#�� �������+����#"�"��#����"� ���������
� (���� #���#������#"���#����#"��
"�� ������� ����+��" "#"�����#�������+ ��������#�����#"��
����#"���������;����*����#��#�3
� ��+"�����*����#�����.���������"�#"��� ��+"���#������.���+�����#��������"��� ��+"����#���� �.�������"�����������������#�� ��+"���"�+���#"���+�������"#��� ���"��
/����������������
�������/�-��
�����������#�#��#��������#����+"�������"�� ����#
�������#�����������#�#��#����;�����"���"��
�����������#�3
� ���#� �"#����������+�����"�� ������� -������#�����������������#��." ��+���#�"�
Planning and Production Environments
�����+� �� ���"��� ����#����#�����#"+��#"����������"�������������������#�������#����"��#��������#"���������#���� ���"����#������"��.�"���� �#"����(�" �#�#���.������"��#���+� ��"�������"�����#���"����#�#��������#����� �����#��#��"++���#���"�#�"��#�����"������"�����#�
Manufacturing and Distribution Planning
1–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
ForecastedEnd Item
ForecastedOptions
CustomerOrders
Make–to–Stock Assemble–to–Order Make–to–Order
,� ��������� ��������+��#����+�����"#���#��#����#���#���H
�����������"����+#��#��������#�"����� �#����>��
���#�������#�����+#��#��������#�"����� �#������"
���"�����#������ ��"��� ����#�" �"#����1����#"��
�+�����"#���"������"� �+��#��
����������������� ��������+��#����+��.���. "��#��#����#���#���H
��#"���� ��#"����>������#�������#�����+#����#"��
���+�."��#���.�#�.�+���+"�� ����. ���+�#��������#�
������#�������"+"��#�����#"���"��#���+"�� ������#�
�����+��#��#�����"���"��#�"����"�����#���3
� -#���������+"����������"���#��+��� ���#�� �� -#������+����#���������#������� ��������#��
�#�#�����#"��� ���
,� ���������� ��������+��#����+������#�"� �������������#�#��#
���#��*���#�������� ���#"����>������#�������#���
.�+�������.��"�������#"����#����� ��� �"��#��������#
#��#�������������#�#��#���"�� ����#���+� ��"��
+��#�3
� 2����#������#��"G���+�����"+"������� �����"#����������+����#��� 2����#"����@�"�� ����� ���#"��
Planning Systems Overview
1–23OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Planning a Total Business Solution
PeopleTechnology
Process
(�#�#� �.�"���� �#"���"�#���#��#�����"#"�� �� ����#3
����� 1��#�����#�"���#��#�� ����#�"������� �#"�������
��#����"��������#"����������������#�����"#���#�
������� ������� ���#����� "�"���������#"���#��������
�++��#"�� �������������� ��3
� 6�"���������C���"���"��� 6�#�����+��#�"������#"��� 1��� ��������#�#"����+�#��������#��#�"
��������.�����������#
��������� �����@�"��#���.�#�#�� �#�����#���/�.��������� ����3
� ������������+#���� ���� ����#��������#� (�0:�����������#���� �#+��
Manufacturing and Distribution Planning
1–24 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
People
2��� �����#���*���#��������-��� �"�������������"������� ��#����#�#���/�.��������"���#��#�#���"�����"���#���������+�������#��"��
,���������
����������
-�� ����#"���������+� �.�"���� �#"����@�"���
���������#�"��� �����#�#��#�"�� ���3
� ����"##"���#���#"�������+"����"� �������#�����"#"��#�#���+"#�#"��
� ������"���#���"�� ����#�#"���#�����"#��#����#��"#�������"." "#�������������#�." "#��#�����#��/�.
����������������� �++��#"�������#���������*����#���+��#���������
�������+�������"��#���+�#�����������#��"�#���#��
� �#"����#�"�� ����#�#"���#"���������"�������#��
+�#���������+�#����������� ����#"�"��#��"��#��
"�� ����#�#"���������-�����"#"����#���#������� ��.�
��C+���#"��� �
/������������������� 1��*��� ������+�#���.�����.�"���"���#��#���
���"�#����"#��5���+��#�"��������"#".�#"��
"�� ����#�#"������#"�"���#�"��#����������� ��.�
�����#���"��#���(��"����2����#"�������-����#��
���#� ����"�#��7(2-��9�7������@�"�� ��#9��-��� ���#�"
�����#"������ �����������#"�"��#"���"�����"+"������
������#�"�"���������;���#���"���.�#����#"���"�
#���"���#�������@�� "#��� �#"���
���������������� -�� ����#"�����.���C�� ��.�"���� �#"�����#�"
���#��������"��#�������#��#����� �������� "��#��"
��*��5�*"���#�"�����"����"+#��"#���#��"��#"��
�����#��� "��������@�"��*" �"���� �"������ ����
������"#���������"��#�����*� ����
���������� �����������)������<"����������� #"������"��
���#"���������#������ �#"���"��"�����"���+�����
���C#���+�#���������6�"�����#���.������#�"
� �#"���"��#���������"#"��� ��� ��"����"#�����
Planning Systems Overview
1–25OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Process
��#������� �������@�� "#�����#����"��#���#��#��+�#���.�"��������E�� "#���������� #�"����@�� "#�������#��(�@�� "#�������#����#���#������"+"��#"���"����"��������� ��������"���
�����������#��� ������#�.�#����#"������������#���.��"���#��=��#��(��������#"����������#������������������������������"����"##���#��������"����+#����+���#"��� "#��#������#�#����+"��"���
Technology
���������������#�����.�"���������C���"���"���#������+ �="." "#�������+#��������.��#�" ����#���+ ��#�������������#������� ����5� #"� �� ��#�����.���#��"++���#�#�����+�#����C���"���"����++�#��������"�������#��"���#�"#��������� ��+��"�� ����#�#"����������������+#�����++��#��+� ��"���+��#��3
� ;����+"��������
� 2���"�����#"��
� 6����0� ��#����#��#
� 5���+��#�"������#��#
� ��#��"G�������
6������������������#��������� � ��"�#���#����#�������"�������"+"��� �#"���#��������#��"��� ���"�������������������-����#������ ������2�������#��#������+� ��"�#���#����"#".�#"����#���#��#�����#�#��5���+��#�"��������"#".�#"���2 ���"����#���
Tables for Manufacturing and Distribution Planning
����+� ��"���#�. ���������#�������#�5���+��#�"��������"#".�#"��2 ���"���
����,�������0121� ���#�"��.�"��"�+���#"����.��#������"#�����+"����"�
"����#���������3
� -#������.���������"�#"��� ��#���������� ;�"#��+������
Manufacturing and Distribution Planning
1–26 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
.�����3�����,�����
��0124�
���#�"������������� ��#C ��� �"�+���#"���������3
� ��#� E���#"#"�� <���#"��� 6����� ��� ���#���������
.�����,��������,�����
��5224�
���#�"��"�+���#"����#�#���.�"�����"#� ��� ��.��#�."
�+���#�"� �������3
� ��#�����@���#"#"���+���������#� 1��#���������#"��� <��� ��+���#�" �+�������."
�������,�������
��5511�
���#�"��#�����#"���������#��#���������#���.��#��
)������)�@�"����#�2 ���"����)�������#������"#�
2 ���"�������������"#��)�@�"����#�2 ���"���������
����������5062� ���#�"��#���+����#���#��#��#�5)2����+���� �� �#"���
����#��#�))2��� "��#��
*��������5225� �#�����#"���"�+���#"����"�� ��"�������#���@������
��*����#��������#������������"���#"���
*�������7������5228� ���#�"��#������" �. �������"#��+���������*����#��.�
��������#�����������
"�� ������,�����
��52226�
���#�"����#�" ���#���.��#�� ���+"������*����#��
*��������������
��5525�
���#�"��� ���������+" ������"��)�����
)�@�"����#�2 ���"���
.�����*�����������
,�������5025�
���#�"��#������ �������������� �#"���"��������#��
.������
,��3,*�3$*�$�����
,������*�%��'��5011�
���#�"��#�����#"��������������#���.��52���5)2���
�)2�
,��3,*�3$*�9�'��
9�%��*�+���������
��5014�
���#�"��#���������+�����@�"����#�#��#������#��
#��"#���+�������#�"#���
,��3,*�3$*�
���������5015�
���#�"��#���#"����"����#��+��+����������#�
Planning Systems Overview
1–27OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
��������������
,�������0541�
���#�"����#��+�#�����#��#��#����#� ������ "��
��������#��"#��#������ "�����"�#�. ��� �����#�"�
"�+���#"����@�"���+�����#"���������"�#�"�"���#��
����� ���"�� ��"��3
� ��"�� ���#"��� ������ ������ ��"����##��� ��"����#�@���#"#�� �� "���� ���#"��
�����#������"�+���#"���+���#������� "�������� �
5�#��#�. ��+������� "���"#��������. ��*�#�����#��#
�������"��#������ "������� "��������
����������
�������������05411�
���#�"��#�����#��#��#�"���#"+"������#��"����� "#
�����#����.�#�������� "���.��"#���
Menu Overview
����� �����"��������#��������������"������������"������"����"G���.���#�������+�@�������+����
5���+��#�"��������"#".�#"���2 ���"������������#����#��3�
� )���������������"#��2 ���"��
� 5�#�"� �2 ���"��
Resource and Capacity Planning (G33)
� Resource Requirements Planning (G3311)
Daily Processing (G3310)
� Rough Cut Capacity Planning (G3312)
� Capacity Requirements Planning (G3313)
� Rough Cut Capacity Planning (G3322)
Periodic Processing (G3320)
� Resource Requirements Planning (G3321)
System Setup (G3341)
Manufacturing and Distribution Planning
1–28 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Fast Path Commands for Resource and Capacity Planning
����+� ��"���#�. �����"���#���+�#���#����������#��#������������#������������#���)���������������"#��2 ���"���������1����������������������#��#���+�#���#����������"��#���+�#���#��.�=�
���� ,��� ��������
��" ��)������)�@�"����#�2 ���"�� 8 $$ �))2
��" ��)�������#������"#��2 ���"�� 8 $� )��2
��" �������"#��)�@�"����#�2 ���"�� 8 $ ��)2
2�"��"��)�����0�����"#��2 ���"�� 8 �$ 2�(2
)�����0�����"#��2 ���"�����#�� 8 :$ �(2�
Material Planning (G34)
Daily Processing (G3410)
Periodic Processing (G3420)
Advanced & Technical Operations (G3444)
System Setup (G3440)
� DRP (G3411)
� MPS (G3412)
� MRP (G3413)
� Multi-Plant (G3414)
� Forecasting (G3421)
� Single Site Planning (G3422)
� Multi-Facility Planning (G3423)
� Forecasting Setup (G3441)
� Requirements Planning Setup (G3442)
� Multi-Facility Setup (G3443)
Planning Systems Overview
1–29OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Fast Path Commands for Material Planning
����+� ��"���#�. �����"���#���+�#���#����������#��#������������#������������#���5�#�"� �2 ���"�������#"���������1�����������������������#�#���+�#���#����������"��#���+�#���#��.�=�
���� ,��� ��������
5�#�"� �2 ���"�� 8 : 5(�
�)2���" ������#"�� 8 :$$ �)2
��)2
52����" ������#"�� 8 :$� 52�
�52�
5)2���" ������#"�� 8 :$ 5)2
�5)2
5� #"C2 ��#�2 ���"�����" ������#"�� 8 :$: 5;<�-
�52
�"�� ���"#��2�"��"��2 ���"�������#"�� 8 :�� 2��
5� #"C2 ��#�1��" "#��2 ���"�� 8 :� 252
5�#�"� �2 ���"�����#�� 8 ::� �5(�
5�#�"� �2 ���"�����#�� 8 ::� 5(��
5� #"C2 ��#���#�� 8 :: �52
Manufacturing and Distribution Planning
1–30 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Prerequisites
Manufacturing and Distribution Planning
1–32 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Prerequisites
������#���5���+��#�"��������"#".�#"���2 ���"����#�������+� ��������� ������#��������#���-����#���5��������#���� ������5��������#�����1����#"����#����++��#���#�"� ����������"#��� ���"���
-�����"#"����������� ������#����������� � �����"������. ����#�"� �@�"����#�� ���"���75)29�#���������� #"� ���������2�� � �����"��������#������� �#"���#��#����#����@�"��#������ �#����*��"#�"����#���
2��@�""#�����"#��+�#���+� ��"���#�*3
� ;���#���"���-����#��������� ������5��������#
� ;���#���"���1����#"��
� ;���#���"���2�� � �2���"��
Manufacturing and Distribution Planning
2–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Understanding Inventory and Sales Order Management
����������#��������"#�����#������.����0� ��#�"�+���#"�����������"��#���5���+��#�"��������"#".�#"���2 ���"����#����"#��#���"�+���#"���"#�����#�����#�������#����#������� �����#�"� ��@�"����#�� ��������"#".�#"����@�"����#�� ���
;��#���-����#���5��������#��#���#�����"+��#���+� ��"���"�+���#"���+������"#������"�"�+���#"���"��"#"�� �#��#���5���+��#�"��������"#".�#"��2 ���"����#��3
� 2 ����
� 2 ���"���+��" �
� ��#���������
� ;�"#��+������
� ������ "�������
� A� ��������� "��
� 2 ���"�������
� 2 ���"���+������ �
� 2 ���"���+����
� 1��G��+����
� 5������"� ���+����
� <���#"��
� )�����@���#"#"�
See Also
1������"�+���#"�������##"����������"#�����#������.����0� ��#"�+���#"�������#���+� ��"���#��"��"��#����������������� ��������3
� ����������� ���������� �����
� ���������������� ����� �����
� ������������ ��������������
� �������� �������������������
� ����������� ����������������� �����
� ����������� ����������������� �����
Manufacturing and Distribution Planning
2–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ����������� �������������������� �����
� �������������� ���������� �����
� �������������� ��������� �����
� !��"���#������ $��������
� ����������� �������������������������
� ����������� �������%���������
� ����������� ������ ���������������������� �����
� &������������� ����� ��������������������� ������
Understanding Sales Order Management
������ ������5��������#��#������"���"���#��#�"�+���#"���#��#��5���+��#�"��������"#".�#"���2 ���"����#���
�� �����������#���+� ��"���"��"+"���#��++��#����5���+��#�"�������"#".�#"���2 ���"��3
� �� ���������#������#�#�������+��������+��������#������� ��"#���
� 2"�*���#������@���#"#"���������.��5)2�+����#�"� �� ���"���
� �� �������"#���� "���#�����+�����#���#"�� �����#����*�����
See Also
1������"�+���#"�������##"�������������#"���� ����������#���+� ��"��#��"��"��#���'����(��������� ��������3
� !��"���#���)���������� �����
� !��"���#���&���������� �����
2–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Understanding Forecasting
�++��#"������������#��+��"#".�#"�����������+��#�"�����#"�"#"��.��"���"#�����#���"���������#"�"��#"���#���������+�#�����*�#��1����#"���"�#��������+���/��#"�����#�� ���������"�#��#���+�#����-�� ����#"����+����#"����#���� �������#���������#���*�#�#��������� ��@�"�* ���#��#�����������*��"�+��������""����.��#���������#"����
>����������+����#�#����*��� ���"������""����.��#3
� ��#�������
� -����#��
� �� "�����+�����
� ��*� ���
� �����"#���@�"����#
� ������������
� <�.�
� �@�"����#
� 6����#
� ���� �����#��+����������#
� ��*+�����@�"����#
����1����#"����#��������#��#���+� ��"���#�����+�+����#3�
$�������������� ��#�" �+����#����.�������"��"�"��� �"#���
���������������� �������7��������#��9�+����#����.������� ���
�����#��������������������#� "���
��������������������� 2 ���"���." �+����#����.�������������+�"#���"���
." ��+���#�"� �+���#�#��#��+ ��#��������"#���"�� ����#
����"#�"�.�" #�
Manufacturing and Distribution Planning
2–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����1����#"����#��������#�����������/��#"���#��#����������"���#�+�#��������������� ���"������������ "����#��������� ���"����������� "����#����� �� �#����#�"� ��@�"����#�+��� ���������#� ��� �+��������#�"� �#������ �=��.���. "��
Detail Forecast(F3460)
DRP Distribution Requirements Planning
RRP Resource Requirements PlanningMPS Master Production ScheduleMRP Material Requirements Planning
Detail Forecasts
����)������)�@�"����#�2 ���"���7))29��#������+����#�#���#"��#�#���#"��������������������#����*���������#��
����5�#��2����#"��������� ��752�9��#���� ������������ ��#��������#�������������=���#�#������+��#����1����#��������52��"���#�#��#��� ���#��"����������.�+����������� �#�����������#"���� ����(��"#"��� ��� ���������#������#�#�������+��������+��52��
5�#�"� �)�@�"����#�2 ���"���75)29�"�������"������������ "����#��#��#��=�����#����@�"����#��+�� �52������#�"#���#��#�����������#� ��� �>�������� �����+����#���"���#�+�� ���C ��� �5)2���������#�#��#�����"�����#��"#��"���������#�����������"���"����������#��"��# ����=� �"�� ��#"���#�������#"����+�����#"�� �������#��#�����#"�� ��.������� ��#��
�"#".�#"���)�@�"����#�2 ���"���7�)29�"������������#��#���#��#�� ���������#� �#����"#".�#"����+�+"�"����������>����������+����#���"���#+���)2��������������������#� ��� ���#����������#��#�������� ��#������"#".�#"����
Understanding Forecasting
2–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Features of the Forecasting System
>������#���1����#"����#���#�3�
� 8����#��+����#
� ��#��+����#������ �
� 5�"�#�"��.�#������� ����#����+����#�����+����#������#���.��#���#��
� ���#����"@���+����#�.�� ������#���
� �����"G��#���� �������"#�����#��"�����* �������#� ��#"�����"��
� 8����#��+����#�.�������������� ��+�$���"++���#�+��� ��#��#���������"�#���+�+����#�"#��#"��������"��#�������#�
� �� �� �#����"����+�#���$��+��� �����"���#���.�#�+"#�+����#
� ��+"���#����"������#��#�#����#������#������"G��� ������"#�"��������#�" �+����#
� ���#���� #"� ���"����"���+������.��*���#��������������"#����#�������������"��������������#���#������"��������"��#�����#�" +����#�#�. �
� )��"���������/�#�.�#��+����#������ ��������#�� ��#����� ��� ��+#����"�����
� -�#���#��#�����#�" �+����#������"�#���)2��52�������5)2������#"��
� 1�����������������#�������������#� ��� �#��.�#���"���� ��� ���� ���� ���
� ��#���.����+ ���#�������#�������������#���.��#���+���������.�"��������#���� ���
� �#��������"� ���.�#���"�"�� �������/�#���@���#"#"�����������#
� (##�������"�#"���#�=#�#����+����#��#�#�����#�" ����������� ���
1 �="." "#��"���*���+��#����+�#��������������1����#"����#����������#�����#��+����#�#�*��"�#��������#�@���#"#�#"���"�+���#"����������� �#����������#�� �������"#�������� ���@�� "#�#"���"�+���#"����������������"��#���� ���������#"#"����������������#�������#��������@���#"#�#"���"�+���#"�������� �������#����/�#�"#��"#��@�� "#�#"���"�+���#"������������������#���������"G��+����#��#����#�������������#��#������*���#����� ��� ��+�#���+����#�#����#���#"�� ������#��� ��#��� ��� �
>���������+���"�� �#"���.�������#���"�"#"� �+����#�#����������"++���#"#��#"����(+#�����������#���+����#��#����#�������#����������+��#�"�������"#".�#"���� ����"#���������������������������
Manufacturing and Distribution Planning
2–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����#����"#��G���������#"�����#�" �������1���=��� ���"+�#���@���#"#"��������#�"���=#��#��� ������F"#������#�" �1����#�8����#"�������#�0�������(�#�� ����G���������#"����#����#������#��G���������#"�������"��#���1����#�#�. ��71 :&�9�
Forecasting Levels and Methods
>������������#��.�#����#�" �+����#�7"�� �C"#��9�����������7�����#� "��9+����#�#��#��+ ��#������#����������##���������#������ �G����#�� ��#��� �� �#��+����#��"���$��+����#"�����#���������+����#�"�� ������#�" "�+���#"����#�#���"#��� ��� ������"���C ��� �"�+���#"����.��#���.�������#����������������� ���
Best Fit
�����#������������#���.�#�+"#�+����#�.����� �"���#���� ��#��+����#"�����#����#����#�� �������"#������������"���#���+����#"�� �#"���#��#�����#�� ��"#������������������#����.�#�+"#�+����#��#���#������������#�� �� �������"#�"��#��+����#�+�������"+"��#"����"������������#�����������#� ��������"++���#�+����#"�����#������� ���������"�#���� ���������#����#������������#�����#������#��+����#��#���.�#�+"#�
History FutureHoldoutPeriod
Demand
Best Fit
Present
�����#������#���+� ��"����@�������+�#���#����#��"���#���.�#�+"#3
$� ;����������"+"�����#����#��"�� �#����+����#�+��#����� ���#���"���
�� ���������#�� �� ��#��#���"�� �#���+����#�+��#����� ���#���"���
Understanding Forecasting
2–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �� �� �#��#��������#�����+�����������#���������.� �#�����"�#"���#���#��"�����"���+����#"�����#������#�� �� ����#�����#�����#���#�� � ��������#�������"#���#��������#�����+�����������#��������.� �#�����"�#"����.�������#�������"�����#"���#��#������ ��#�
:� )�����������.�#�+"#�+����#�.��#��������#�����+���������#��#�"� ��#�#��$��������#�7����������9���#���������.� �#�����"�#"��� ��#�#��G���
Forecasting Methods
����1����#"����#������$����#����+��@���#"#�#"���+����#"������"��"��#����"�����#�������"���#���.�#�+"#�+������+����#"���"#��#"�������"+��#�����#����#��#��������#�#����#���#�����"��#�������"�����#"��+��#������#����#�" �1����#�������72 :&4�9�
,�����1
�������-%��9���:���
��"���#�������#���2����#�����<�#�>���+��� ��#�
�� #"� �������+����#���"���.��#������"+"��������#���
"���������������
��"���#�����@�"��#������.���+���"���+��#���.�#
+"#�� �����������+�� ���"#���#��+����#�����������"
��#����"���+� �#��+����#��������+������� �"#��
�"#�����#������� "���
,�����4
�����������������-%��
9���:���
��"���#�������#����� �� �#���2����#�����<�#�>��
+��� ��#���������#�����#�� ���+���"������"+"����+
� ��+���#���������"����+�#������"�����������
�#�����#��"����������#����"���������������
#������ #"� "���������"���.��#��������#����#�
��#��"���#���+����#�
��"���#�����@�"��#������.���+���"����+�� �
�����"#���� �����������+�� ���"#���#��+����#
����������"���#����"���+� �#��+����#���#C#��
�������+������� �"#����"#�����#������� "���
,�����5
9���:����� ���:���
��"���#������� �#����H�� ��+��#���+� ��"������H
+����#�
��"���#�����@�"��#������.���+���"���+��#���.�#
+"#�� �����������+�� �������"#���#��+����#
����������"���#����"���+� �#��+����#��������+�
��#��������#��"#�� ��� ��������������� �������
�"#���#���#����
Manufacturing and Distribution Planning
2–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
,�����0
,�%����%�����
��"���#�������#���5��"���(������+��� ��#��������
#������"+"������.���+���"���#����/��#�#�����=#
��"����>������ ����� �� �#��"#��+#���7���#� �����#
��#�@��#� �9�#���+ ��#������"���������� ��� �
��"���#�����@�"��#������.���+���"���+��#���.�#
+"#�� ��#������.���+���"����+�� �������"#���#�
+����#�����������"���#����"���+� �#��+����#
�������+����#��������#��"#���#���#����
,�����;
9��������&�������
��"���#�������#���<"����(���="��#"���+��� ��#�
�����#����#����+���#������.���+���"����+�� �
�����"#���������/��#�#�"�#����#��#���+����#��>��
��� ����� �� �#��#���#�������#� ��#����#��#��������"�
#����
��"���#�����@�"��#������.����"���+��#���.�#�+"#
� ��#������.���+����"+"������.���+���"����+�� �
�����"#������"���#����"���+� �#��+����#�������
+�����������#��������#��"#�����"#��#���"#"����
����#"���#����#��#������#�����#������� �+ ��#��#"���
,�����6
9�����+����*���������
�9�*�
��"���#������"�������@��#"������"."�����#�"��#C "��
� �#"���"��.�#�����#����"#�"�� �� ����#������#��
�������+�#"����<�)�+"#��� "���#��#���� ��#���������+
��#������#��#�#�������+�#���@�����+�#����"++�����
.�#�����#�����#�� �� ����#����"�#�����#������"��
"�������"�"�"G��������+����#�"�����/��#"����+�#�"
#�"��#� "���"�#��#���+�#���
��"���#�����@�"��� ����#���"#���+��#�����"��
�����#���.��#������.���+���"���+��#���.�#�+"#�� �
#������"+"������.���+��"#�"�� ���#����"�������
�"�"�����@�"����#�"�#����"#�"�� ���#����"�#����"
��#����"���+� �#��+����#�������������#����"��
"����#����"��#�����#��
,�����8
������$�����
���&�������
��"���#�������#����������������(���="��#"��
+��� ��#��� �#��������.�������#������.���+���"��
�+�� ���"#���#����/��#�#���+����#�
��"���#�����@�"��#������.���+���"���+��#���.�#
+"#�� ��#������.���+���"����+�� �������"#���#"��
#�������"���#����"���#���+� �#��+����#��������+�
���C#���
Understanding Forecasting
2–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
,�����<
���&����,�����
��������-%���,�����
������
��"���#����� �������#��� ��#�#������.���+���"��
+��#���.�#�+"#�. ��*��+�� �������"#���#�#"����
���#���"��������� ���������#����"��������������
�"#����"���#�����"+��"#����"���#����"�"�" ��#��5�#���
$��2����#�����<�#�>�����=���#�#��#������������"+��#��
���.���+���"���#��#����������#���.���
������"���������#������ ��#������#�"���#�����@�"�
��"���.�#�+"#�� ��#������.���+���"����+�� ����#�
"��"��#������"���#����"���+� �#��+����#��������+���
� ������#����
,�����=
"�������,�%���
�%�����
������"��#���5��"���(������+��� ��"�"�" ��#�
5�#����:��5��"���(������+��� ���.������"#�������
#������"������#�H�� ���"#���"��"��#���#����/��#�#��
��=#����#�H�� ���"#����F��������"#��#�"�+��� �
���������"�����"��#�+��������+�#����"����"���
��"���#�����@�"��#������.���+���"��#�����"��
� ��#���� ����"����+�.�#�+"#���#����"�" ��#��5��"��
(�������#�"���#���� ����������#�������"#�"���#
�����������+�������#��"#��#����#�����
����� "#�����"���#����"���+� �#��+����#��������+�
��#��������#��"#���������#��#�"�� �#"�� �� ��� �
,�����12
9��������������
��"���#������ �� �#������"��#�����������+���#�� �
��#���;"���#������.���+���"����+�� �������"#��
#�����"��#����� �� �#"���7+���$�#��$�9�"��"��#���"��#��
����"�����#"���������#����������#����#"��
����"���#����"�����#��"��#��������+���#���+"#
7 ��#���"��#9�#��#���+"�� �7��#���"��#9�������#���#���
��/��#�#�"�"�+���#"���#���������"���"��#���+����#�
��"���#�����@�"��#������#��.�#�+"#�� ��� �����
�"#���+��#������.���+���"������"+"���"��#��
����"�����#"���
,�����11
/&�����������������
��"���#������ �� �#�������#��������������"��
.����������#"��#�������#"���#�������� � ��� ��+
� ������#���� ��#����"#�"�� ���#����"���
��"���#�����@�"��� ����#���"#���+��#���#"��
��"��������#���.��#������.���+���"���+��#���.�#
+"#�� ��#������.���+��"#�"�� ���#����"������"+"���
�����"�"�����@�"����#�"�#����"#�"�� ���#����"���
��"���#����"���+� �#��+����#�������������#����"
��� "����#����"��#�����#��
Manufacturing and Distribution Planning
2–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
,�����14
/&�����������������
'��� �������
�����������
��"���#������ �� �#����#������������ �"���=��������
�=�����#"� �����#�����������+���#���� �����
�"#���������#���#������� "������/��#"����+�#���#���
#��#���+����#�������/�#�+��#�������� �"���=�
��"���#�����@�"��#������.���+���"���+��#���.�#
+"#�� ��#��������+�� ����#������"���+� �+��"#���#��#
�����.�#��#������������� "#��"��#���+����#��>������
��#��#���� ��������.�#��+��#���������#����#��
�� �� �#��#�����( ��������.�#��+��#�����#������#�"��
���#��#�#����#������#���� �� �#��#������#���
�������+��#�������� � ��� �������"#�����+�� �����
#���#������������#��+�#���+����#������#"�� ��
Demand Patterns
����1����#"����#������� �������"#���#�����"�#�+�#����������1����#���#�������" �. ��"��#��������������1����#"����#������#�" ���+��#������������##���" �#�#������#���+� ��"���������
>�������+����#�#���"���������#���������+�#���+� ��"���"�+���#"���+���"��������������#���#�3
� ���� �
� 2���#"��� �"#��
� ��#�������
� ���"�����#
� -�#�� ��#�������
>�������� ��+����#��������+��#���+� ��"�������+��#�"���#�#��"���"��#�������+��#�"������"�����#�"����"���#��������������3
� 5�*��#��#��*
� (��. ��#�����
� 5�*��#�����
Understanding Forecasting
2–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Six Typical Demand Patterns
Demand Demand Demand
Demand Demand Demand
Time Time Time
Time Time Time
Horizontal Demand Positive Trend Demand Negative Trend Demand
Seasonal Demand Trend-Seasonal Demand Non-Annual Cycle
Forecast Accuracy
����+� ��"���#�#"#"�� � ���������#������������+���+����#3�
� (� ���C#���+����#�"� �������#��#��������#C#���+����#��.�����#���+�#���"�#��#���+�#���������/��#�#���+����#��#���������"�. ������++��#�#���+����#�
� (�+����#�+���������#�+��" ��#����#��.�����������#��#������+����#+��"��"�"��� ����.���+�#��������#�+��" ���������������� ������#�����#���+����#�+��"��"�"��� �"#�������"G��"�#��#�����������#"��������������#��+����#�
Manufacturing and Distribution Planning
2–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Forecast Considerations
>������ ����#�� ���=� �"�� �������#���#��#��+����#�+�#��������������+� ��"����"���#������"��#��++��#�����.�"��������@�"������#����"���������"+������+����#3�
� D��������#�#��#�����������#���#�
� 2 ���+��+�#���� ������#"��
� �������"����#"��� �����"�#���#"��� ��� "#"�
� D��� ���������������#���� �#"��
� ���#����������������#�� ��"�#�
� -�����#"���+��������#"#"��
� ������"��������
>�������� �����#���+� ��"���*"����+� ���C#���#������� �"�#��"�+ �����#�����"����+�����+����#3
� 5�*�#�����
� <���"���������"��"��"��#�
Forecasting Process
>������#����=#��#��� ������F"#���������#���������#��+���#����� �����F"#���#�. ��71:�$$%9��#����� ��������#�" �#�. ��71:�$$9����.�#���"�#��"#���#���1����#�#�. ��71 :&�9���#���1����#��������#�. ��71 :��9�������"������#���*"����+�+����#�#��#������ ���#�������#���
>������������#����#�" �+����#�������"���+���#�" �+����#�.���������#�"��#���1����#�#�. �����#��+�������+����#�����#����.����"���
����+� ��"�������"��" �#�#��#����@������#��#�����+� ��������������#�����#�" �+����#"���������
Understanding Forecasting
2–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Sales Order HistoryF42119
Detail Forecasts
Force ChangesP34610
Enter/ChangeSummaries
Summarize DetailForecasts
Price RollupsP3460
Forecast PricingP34007
Generate DetailForecast
Enter/ChangeActuals
Extract SalesOrder History
P3465
Review By TypeP34300
Forecast SummaryF3400
DRP/MPS/MRPGenerationP3482
DRP/MPS/MRPGenerationP3483
OnlineSimulation
F3460 P3460
P34650
P34600
P34200
Forecast SummaryF3400
Detail ForecastsF3460
Enter/ChangeActuals
F3460
Manufacturing and Distribution Planning
2–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Evaluating the Forecasts
>�������� ��#�+����#"�����#����#�������#�����������$��+����#�+�����������#�������+����#"�����#�����" ���.�. �����#���� "��# ���"++���#��/��#"���������#��������+������#����+����#��"#�"�"����#"�� �#����*����./��#"������""�������"�����"���+����#�#�����"������� ���+��������+#��������#�
�����#�����#���#"�� ����� ��#����+�������+�������+����#"�����#���#��#������ ��#������+��������+�#��������#�+����#��>�������������.�#����#�����+��������"#�"���������.� �#�����"�#"���75(�9����������#��+��������72�(9��5(��"����������+�+����#�����2�(�"����������++����#�."���6�#���+�#������+���������� ��#"���#����"@����@�"����#�� � ���"#�����#��+����������"+"�����"����+�#"������"���"����+�����#�"#���"��� �����K�� ���#���"��L���K��"���+��#���.�#�+"#L�72619�
���������#�����+��������+���+����#"�����#��������#���+����#�+��� ��#��"�� �#����+����#�+��#����"#�"�� ��� ���#���"�����"++�������������#.�#�������#�� �� ����#������#���"�� �#���+����#�+��#����� ���#���"���
������� #"� ��+����#���#�������� ��#����#�"���������������+��������#�����5� #"� ��+����#������ �� �#���+��#����� ���#���"���������������#��#���*������ ���"#���+��#��#�������"����+�#"��������+����#"�����#���#��#��������#���.�#���#���7.�#�+"#9�.�#�����#���+����#�����#�����#�� �� ���"���#����� ���#���"���"�#������������������+�����"������� ������"���������#"���"����"+"��#������������#������"��#��������+������+����#������#"���#��#�����=#�
Mean Absolute Deviation
5�����.� �#�����"�#"���75(�9�"�#��������7��������9��+�#����.� �#���� ��7������"#���9��+�#������"�#"���7����9�.�#�������#�� �����+����#���#��5(��"����������+�#��������������"#�����+����#���=���#���"�����+����#"�����#����������#���"#����6�������.� �#���� ����������"��#���� �� �#"������"#"�����������#���#�����#"�������(�����#������� +����#"�����#�����#��������"#��#����� �#�5(��"�#��"�� ��#�����#� "�. ��+��#��#������#�+��#��#��� ���#���"���������#���+����#�"���."����������������� ���"#".�#������"�� ����#����#"�� �� �#"���"���="#.�#�����5(������#����#�����������������+��"#".�#"����#��������"�#"������������@�������3
� 5(��?�7�Σ N�(�#�� �C�1����#�N�9�0��� �#���������"�#"����(σ)�≅ $��4�5(�
� 5�����@��������≅ Cσ�
����+� ��"���#�. ������#����� �� �#"����+�5(��+��#����+�#���+����#"����#�������"��=��� �������#��#�#������������"+"���"��#�������"����#"���#��#�#����� ���#���"��� ���#��72619�"��@�� �#��4���"���
Understanding Forecasting
2–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Method 1, Percent Over Last Year
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
�������7���������������������,�$)!�%���.�>;
ÑÑÑÑÑÑ
>��ÑÑÑÑÑÑÑÑ
��� ÑÑÑÑÑÑ
1�.ÑÑÑÑÑÑ
5�ÑÑÑÑÑÑ
(�ÑÑÑÑÑÑÑÑ
5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ
�� ÑÑÑÑÑÑ
(��ÑÑÑÑÑÑ
���ÑÑÑÑÑÑÑÑ
��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ
���
ÑÑÑÑÑÑ
$%%&ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
$��ÑÑÑÑÑÑ
$$�ÑÑÑÑÑÑÑÑ
$� ÑÑÑÑÑÑ
$ % ÑÑÑÑÑÑ
$
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ112�������-%��9���:������������������������������ÑÑÑÑÑÑ>��
ÑÑÑÑÑÑÑÑ���
ÑÑÑÑÑÑ1�.
ÑÑÑÑÑÑ5�
ÑÑÑÑÑÑ(�
ÑÑÑÑÑÑÑÑ5��
ÑÑÑÑÑÑ���
ÑÑÑÑÑÑ��
ÑÑÑÑÑÑ(��
ÑÑÑÑÑÑ���
ÑÑÑÑÑÑÑÑ��#
ÑÑÑÑÑÑD��
ÑÑÑÑÑÑ���ÑÑÑ
ÑÑÑ$%%!ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
$:$ÑÑÑÑÑÑ
$ �ÑÑÑÑÑÑÑÑ
$ 4ÑÑÑÑÑÑ
$4 ÑÑÑÑÑÑ
$:&ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
�������������������������������������ÑÑÑÑÑÑ
>��ÑÑÑÑÑÑÑÑ
��� ÑÑÑÑÑÑ
1�.ÑÑÑÑÑÑ
5�ÑÑÑÑÑÑ
(�ÑÑÑÑÑÑÑÑ
5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ
�� ÑÑÑÑÑÑ
(��ÑÑÑÑÑÑ
���ÑÑÑÑÑÑÑÑ
��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ
���
ÑÑÑÑÑÑ
$%%!ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
$�%ÑÑÑÑÑÑ
$ $ÑÑÑÑÑÑÑÑ
$$: ÑÑÑÑÑÑ
$$% ÑÑÑÑÑÑ
$ !
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
��������?������/�����)���������������
ÑÑÑÑÑÑ
>��ÑÑÑÑÑÑÑÑ
��� ÑÑÑÑÑÑ
1�.ÑÑÑÑÑÑ
5�ÑÑÑÑÑÑ
(�ÑÑÑÑÑÑÑÑ
5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ
�� ÑÑÑÑÑÑ
(��ÑÑÑÑÑÑ
���ÑÑÑÑÑÑÑÑ
��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ
���
ÑÑÑÑÑÑ
�ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
$�ÑÑÑÑÑÑ
$ÑÑÑÑÑÑÑÑ
�$ ÑÑÑÑÑÑ
: ÑÑÑÑÑÑ
%
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ,�����������$�%������>�14@1@41@50@=�3;>1;A0
Method 4, Moving Average
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
�������7���������������������,�$)!�%���.�>;)�>0ÑÑÑÑÑÑ
>��ÑÑÑÑÑÑÑÑ
��� ÑÑÑÑÑÑ
1�.ÑÑÑÑÑÑ
5�ÑÑÑÑÑÑ
(�ÑÑÑÑÑÑÑÑ
5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ
�� ÑÑÑÑÑÑ
(��ÑÑÑÑÑÑ
���ÑÑÑÑÑÑÑÑ
��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ
���
ÑÑÑÑÑÑ
$%%!ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
$�4ÑÑÑÑÑÑÑÑ
$�� ÑÑÑÑÑÑ$ ! ÑÑÑÑÑÑ
$:�ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
5��"���(������1����#�+��#���F� ���#�2�"����8"������?�:
7$�4�O�$���O�$ !�O�$:�9�0�:�?�$ $� (����H%!
7$���O�$ !�O�$:��O�$�%9�0�:�?�$ � �����H%!
7$ !�O�$:��O�$�%�O�$ $9�0�:�?�$ :��4���$ : ��#��H%!
7$:��O�$�%�O�$ $�O�$$:9�0�:�?�$���4���$�% D����H%!
7$�%�O�$ $�O�$$:�O�$$%9�0�:�?�$� ��4���$� �����H%!ÑÑÑÑÑÑ>��
ÑÑÑÑÑÑÑÑ���
ÑÑÑÑÑÑ1�.
ÑÑÑÑÑÑ5�
ÑÑÑÑÑÑ(�
ÑÑÑÑÑÑÑÑ5��
ÑÑÑÑÑÑ���
ÑÑÑÑÑÑ��
ÑÑÑÑÑÑ(��
ÑÑÑÑÑÑ���
ÑÑÑÑÑÑÑÑ��#
ÑÑÑÑÑÑD��
ÑÑÑÑÑÑ���ÑÑÑ
ÑÑÑ$%%!ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ$ $
ÑÑÑÑÑÑ$ �
ÑÑÑÑÑÑÑÑ$ :
ÑÑÑÑÑÑ$�%
ÑÑÑÑÑÑ$� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ�������������������������������������
ÑÑÑÑÑÑ
>��ÑÑÑÑÑÑÑÑ
���ÑÑÑÑÑÑ
1�.ÑÑÑÑÑÑ
5�ÑÑÑÑÑÑ
(�ÑÑÑÑÑÑÑÑ
5��ÑÑÑÑÑÑ���ÑÑÑÑÑÑ
�� ÑÑÑÑÑÑ
(��ÑÑÑÑÑÑ
���ÑÑÑÑÑÑÑÑ
��#ÑÑÑÑÑÑD��ÑÑÑÑÑÑ
���ÑÑÑÑÑÑ
$%%!ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
$�%ÑÑÑÑÑÑ
$ $ÑÑÑÑÑÑÑÑ
$$:ÑÑÑÑÑÑ
$$%ÑÑÑÑÑÑ
$ !ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
��������?������/�����)���������������
ÑÑÑÑÑÑ
>��ÑÑÑÑÑÑÑÑ
��� ÑÑÑÑÑÑ
1�.ÑÑÑÑÑÑ
5�ÑÑÑÑÑÑ
(�ÑÑÑÑÑÑÑÑ
5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ
�� ÑÑÑÑÑÑ
(��ÑÑÑÑÑÑ
���ÑÑÑÑÑÑÑÑ
��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ
���
ÑÑÑÑÑÑ
�ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
� ÑÑÑÑÑÑ
$ÑÑÑÑÑÑÑÑ
�� ÑÑÑÑÑÑ
$� ÑÑÑÑÑÑ
$:
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
,�����������$�%������>�4@1@42@12@10�3;>=A0
6�������#����#������"����#���5��"���(��������#����"������������"����"#����#����� ��5(���%�:��+��#����"������ ���#���"���
Manufacturing and Distribution Planning
2–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Percent of Accuracy
2����#��+���������72�(9�"����������+�+����#�."��������+����#������"#��# ��#����"����"����#�"�������� �#������"����#�����#�"�������+����#�������"#��# ��#��� ����"����#�"�������������������#�����"������ "����(�+����#�#��#�"�$����"#�#��� ����#��������"#�#����"�������#��������"#�#����"������ ��.�������."����+����#��������"#"�������+�$��"����� ���.��#�������#"�������+���������
���?�(�#�� �C�1����#
������������#�����.��#����"��"����#������������#���+����#�"���."�������� ������#��+��+�#��#��*�����.������#��.�++��#�������-��#�"�"#��#"����"#"���#���"���#��#�#��� "�"��#��+����#������"#�"�#�������#����."���+����#��F�������"����"���"���#"���#���"#��#"����.������� ��.�"�#���#�����#��������������"������ ��.������#�++���"��#���+"#��"��������#�������#�++���+��#�����=#�#�����"����-����"���"���#"���#������"#�����+�+����#����"���� �������"#"�� �#����"�+����#�."��
2�(�?�(Σ (�#�� �� ����"����� ���#���"���0�Σ 1����#�� ����"����� ���#��"��9�P$��Q
D�#��#��#�#�������#"�������#����� ���#���"���� �����"#"������#������ �����#"������������#���#�#� ��+���#�� �� ���=�����#���#�#� ��++����#�� ���#����#"��"����#��#����$��������#���+�������"#�"�"���". ��#�.������#����$��������#������#����������+����#�"���."�����#���2�(��#"�"�$��������#������+����"#�"�������"�. ��#��.��%4������#������#��#����#�.��$$�������#������#�������2�(��"#�"��� ��#�#���+����#"�����#����#��#�����2�(��#"��� ��#�#��$��������#�
����+� ��"���#�. ������#����� �� �#"����+�2�(�+��#����+�#���+����#"����#�������"��=��� �������#��#�#������������"+"���"��#�������"����#"���#��#�#����� ���#���"��� ���#��72619�"��@�� �#��4���"���
Understanding Forecasting
2–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Method 1, Percent Over Last Year
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
�������7����������������������-�)!�%���.�>;
ÑÑÑÑÑÑ
>��ÑÑÑÑÑÑÑÑ
��� ÑÑÑÑÑÑ
1�.ÑÑÑÑÑÑ
5�ÑÑÑÑÑÑ
(�ÑÑÑÑÑÑÑÑ
5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ
�� ÑÑÑÑÑÑ
(��ÑÑÑÑÑÑ
���ÑÑÑÑÑÑÑÑ
��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ
���
ÑÑÑÑÑÑ
$%%&ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
$��ÑÑÑÑÑÑ
$$�ÑÑÑÑÑÑÑÑ
$� ÑÑÑÑÑÑ
$ % ÑÑÑÑÑÑ
$
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ112�������-%��9���:������������������������������ÑÑÑÑÑÑ>��
ÑÑÑÑÑÑÑÑ���
ÑÑÑÑÑÑ1�.
ÑÑÑÑÑÑ5�
ÑÑÑÑÑÑ(�
ÑÑÑÑÑÑÑÑ5��
ÑÑÑÑÑÑ���
ÑÑÑÑÑÑ��
ÑÑÑÑÑÑ(��
ÑÑÑÑÑÑ���
ÑÑÑÑÑÑÑÑ��#
ÑÑÑÑÑÑD��
ÑÑÑÑÑÑ���ÑÑÑ
ÑÑÑ$%%!ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
$:$ÑÑÑÑÑÑ
$ �ÑÑÑÑÑÑÑÑ
$ 4ÑÑÑÑÑÑ
$4 ÑÑÑÑÑÑ
$:&ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
�������������������������������������ÑÑÑÑÑÑ
>��ÑÑÑÑÑÑÑÑ
��� ÑÑÑÑÑÑ
1�.ÑÑÑÑÑÑ
5�ÑÑÑÑÑÑ
(�ÑÑÑÑÑÑÑÑ
5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ
�� ÑÑÑÑÑÑ
(��ÑÑÑÑÑÑ
���ÑÑÑÑÑÑÑÑ
��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ
���
ÑÑÑÑÑÑ
$%%!ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
$�%ÑÑÑÑÑÑ
$ $ÑÑÑÑÑÑÑÑ
$$: ÑÑÑÑÑÑ
$$% ÑÑÑÑÑÑ
$ !
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
�����+�(�#�� �?�7$�%�O�$ $�O�$$:�O�$$%�O�$ !9�?�& �
�����+�1����#�?�7$:$�O�$ ��O�$ 4�O�$4 �O�$:&9�?�!�4
2�(��#"��?�7& ��0�!�49�P�$���?��%� &Q
Method 4, Moving Average, n = 4
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
�������7���������������������,�$)!�%���.�>;)�>0
ÑÑÑÑÑÑ
>��ÑÑÑÑÑÑÑÑ
��� ÑÑÑÑÑÑ
1�.ÑÑÑÑÑÑ
5�ÑÑÑÑÑÑ
(�ÑÑÑÑÑÑÑÑ
5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ
�� ÑÑÑÑÑÑ
(��ÑÑÑÑÑÑ
���ÑÑÑÑÑÑÑÑ
��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ
���
ÑÑÑÑÑÑ
$%%!ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
$�4ÑÑÑÑÑÑÑÑ
$�� ÑÑÑÑÑÑ$ ! ÑÑÑÑÑÑ
$:�ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ,�%����%��������������������������������)!�%���>0ÑÑÑ
ÑÑÑ>��ÑÑÑÑÑÑÑÑ���
ÑÑÑÑÑÑ1�.
ÑÑÑÑÑÑ5�
ÑÑÑÑÑÑ(�
ÑÑÑÑÑÑÑÑ5��
ÑÑÑÑÑÑ���
ÑÑÑÑÑÑ��
ÑÑÑÑÑÑ(��
ÑÑÑÑÑÑ���
ÑÑÑÑÑÑÑÑ��#
ÑÑÑÑÑÑD��
ÑÑÑÑÑÑ���ÑÑÑ
ÑÑÑ$%%!ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
$ $ÑÑÑÑÑÑ
$ �ÑÑÑÑÑÑÑÑ
$ :ÑÑÑÑÑÑ
$�%ÑÑÑÑÑÑ
$� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
�������������������������������������ÑÑÑÑÑÑ
>��ÑÑÑÑÑÑÑÑ
��� ÑÑÑÑÑÑ
1�.ÑÑÑÑÑÑ
5�ÑÑÑÑÑÑ
(�ÑÑÑÑÑÑÑÑ
5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ
�� ÑÑÑÑÑÑ
(��ÑÑÑÑÑÑ
���ÑÑÑÑÑÑÑÑ
��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ
���ÑÑÑÑÑÑ
$%%!ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
ÑÑÑÑÑÑ
$�%ÑÑÑÑÑÑ
$ $ÑÑÑÑÑÑÑÑ
$$: ÑÑÑÑÑÑ
$$% ÑÑÑÑÑÑ
$ !
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
�����+�(�#�� �?�7$�%�O�$ $�O�$$:�O�$$%�O�$ !9�?�& �
�����+�1����#�?�7$ $�O�$ ��O�$ :�O�$�%�O�$� 9�?�&:%
2�(��#"��?�7& ��0�&:%9�P�$���?�%!��!Q
6�������#����#������"����#������"������������#����"������������"����"#������2�(�� ��#�#��$��Q�+��#����"������ ���#���"���
Manufacturing and Distribution Planning
2–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Tables Used by Forecasting
.�������7���,�����
��2226�
-���#"+"��.������� ��#�������������.�"�����"#
"�+���#"����������������������"�#"���������"����
��#����������
�������.�� ,�����
��2121�
�#���� ������"�+���#"�����#�"�"���#����#����
���������� �����������#�������#������#��#�
���������������
��5022�
���#�"��#���������+����#������#���.��#����#��
����#�������"G���� �������"#������#���.��#��
�=#��#��� ������F"#���������
���������������"��
��50226�
(��"�#��#��������������+���#���1����#
�������#�. ��71 :��9��"#��#�����#�" ������"��#��
1����#�#�. ��71 :&�9�
����������������50228� �#����"���"�+���#"���+��"#����.��������#��������
���."��#"���+��+����#�#����
����������5062� ���#�"��#�����#�" �+����#������#���.��#����#������
#���� �������"#������#���.��#����=#��#��� ��(�#��
������
������������B��
����������02=1�
�#���#������������#��#�#��#�����������#����+�
����������#��"������
����,�������0121� �#���.�"��"�+���#"����.��#��������+"����"����#��
"#����������"#������.������"�#"������#����������
������"#��+�������
����.�������0124� ��+"���������"�#�"������������� ��#C ���
"�+���#"������������#��@���#"#"������"�� � ���#"���
������#����������+��.����� ��� �
�����-����$�����
��0411�
2��"���� �������������.��#����@��#�����#������
�#������#�"�#�. ��#������#��#����� ������F"#��
#�. ��71:�$$%9�+��+����#��� �� �#"���
�����-�����������
��0411=�
���#�"����#�� ����#�����"������"���#���.�"�+��#��
+����#��� �� �#"���
See Also
� !��"���#���&�����*���������"��#���*���������������
2–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Understanding Parallel Processing
2�� � �����"���"���#����"@���#��#��"#".�#����*�#��#������� "��#"����+��������� #"� ���������"#�"�����2;��2�� � �����"��������#���#"���#��#����#����@�"��#������ �#��#�����*��1���=��� ���"+����������=��"�����#���� ����������� ����." ��+���#�"� ����� � �����"����������������"���#"��������+� ��"���"�#�������#��"���"+������#������ �.���+"#�+������ � �����"��3
� ������"#���� #"� �������
� <������ �����+���#���#����� ��� ��+�5)2
(���#�����+���� � �����"���"�#�����#�������� "��#"���#��#��"�"�����#��"�#�����#���"���������#���#���������#���������#��"�� #����� ������� #"� ������������.���+"#��+�#�"���#����"�#��#�#������ "��#"�����#���#"�� ��"�"�����#������������������� ��� "�"��#����#�����"�"#�#"�������5)2052��)�@�"����#�2 ���"���������7) :��9�����#����)2052�05)2������7) :� 9����#�"���#�����+���� � �����"���
������������#������ � �����"�����"����+�) :�������) :� ������� ��"#����������# ���"#�"��#������� ��� ��� �������"����#���"#��������#����������������#���������#���������"#����"#���� ��� ��� ������#��#�@�� �$�������#���������� �"#����#�#�������#� ��� �.�+���"#�������������"#����#�#�����=#� ��� ������#� ��� �O�$�������#�������#�#�"�������#" �"#������������ �"#����( ���"+������������ #"� ����������������� ����� #"� ��"#����������# ���"#��#������� ��� ��� ������
2�� � �����"����������� ��R�H��.�#�������." "#"��#������� #"� ����"���+���.�#���������������#������"�������"@����.�#�����"����+��;�"��� �6�#������"���7;6�9����"������"#�����#�����"+��#������.���+���" �. �������������������������#����#������#���.�#���������������"���+" �#����.�#���#�. ������.��"��#����.�#���/�.������/�.���#���������"����+�#������ "��#"������������#�����������"�����#"���� ��������������"��#����.�#���#�. �����#�"����#��#��#�#����#������#�������#��������.�#���/�.������������+���#�������#�. �������#��#"����(+#��#����#���������� �������#����#���#��"��#��#����.�#��/�.�
�����#���������� ���� "��#"���#��#���� � �����"�������#��������#����� � �����"�����"����������#���+���#���+� ��"���#�*3
� -��"��#��#�����="�������.���+�#��������.�#���/�.�#��#�#����#������������#�#�������#"����(��������"+��#����� ���
Manufacturing and Distribution Planning
2–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
;6���.�#��<"�"#?D��"��#���;6����#"����+�#���/���"�"�+" ���D������##�����="�������.���+�"�" ���.�#���/�.�
� ��#������ #"C#�������/�.�@����
) :�������) :� ������������"�����#"����D��.���+���.�#�����.�����#��2�� � �#�.�#��#�"��"��#������������������#�/�.����������#���5)2���#��>�����#�����.�#������ � ���"���#��#�������"+"�� ����"�����+���� � �����"���
�������3���������������������#��#����������#��������#����������"���+�5)2��#���#"���
����+� ��"�������"��" �#�#����� � �����"��3
CPU
Subsystem
OneWorld Server
BatchProgram
CPU
Subsystem
BatchProgram
CPU
Subsystem
BatchProgram
SubsystemTable
(F986113)
BatchProgram
(Preprocessing)
Submit ParallelProcessing Versionto the server
See Also
� ����������(���������&�� �' ��
� ����������(���������������������&�� �' ��
� !��"���#���(��!����'������� ��"��#���'���� �� ����������������+������"�+���#"����.��#���� � �����"��
Capacity Planning
Manufacturing and Distribution Planning
2–24 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Capacity Planning
;�������"#��2 ���"���#�������#��#��++"�"��#������"#��"����" �. ��#������� "��#���� �����������#"�������� �������#���.��5�#��2����#"�������� ��752�9���5�#�"� �)�@�"����#�2 ���"���75)29��-+��++"�"��#������"#��"��#����" �. ���#����������#�� #��#���� �����#��������"#��
����������������"#��2 ���"�������"��#���+� ��"����#��3
� )������)�@�"����#�2 ���"���7))29
� )�������#������"#��2 ���"���7)��29
� �����"#��)�@�"����#�2 ���"���7�)29
StrategicBusiness Plan
Resource RequirementsPlanningForecasting
Rough CutCapacityPlanning
MasterScheduling
Tactical Plan
Capacity RequirementsPlanning
Material RequirementsPlanning
)��2�"���#"+"�������"#�����#�"�#��#��"#"�� ���*����#��
�)2���#�����������" �. �������� ������@�"����#�������#������������@�"����#������#���.��5)2���)2�"��"��#�����#������������#���"��#�����#�"� ��@�"����#�� �����"������������
Manufacturing and Distribution Planning
3–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
��*����#�������"#��"�.����������" �. ������#��������������#��"#�"���#�"��#"���+�����52���5)2�����������1 ���5��������#����"���#�����#�� ����#��������������#��.�������#���@���#"#���@�"���
�����"#��2 ���"������"#��+�#���+� ��"���#�*3
� )��"��"�����*����#�
� ��#��"�"������" �. �������"#�
� 8����#"�����������+" �
� 8����#"����������@�"����#�� ��
� )��"��"����������@�"����#�� ��
� A� "��#"�����#������� �
� A� "��#"�����#�"� ��@�"����#�� ��
5���+��#�"�����#���#��"������#���#��������#"���� ���"�����#�. ����"
�����#������"#"��� �+�#�������������������������3�
� (��"#"��� �*" ��� �.�
� D�������"���
� D���+��" "#"�������"#"��� ��� ��#�#�
�������+����#"���"�#��� ��"�� �#�#"�����"�#�+������ ��"�����������@�"����#�� ����F�������"#�"�"���#��#�#������.��#��#�#���������+����#�"���#�#�����#�� �� ����.�#�#��#�"#�"��� ��"���#�"�#��#���� ����))2���"�������#"��#���+�#���#"�������������#��#����������#���������������#�
>��������#�����������@�"����#�� ����+#�����������#������ ���C#��+����#�.�#�.�+����������#���5�#�������� "��������������)�����)�@�"����#�2 ���"���7))29��#������#�����#��+�����+����#��+�+�#���� �#���#"��#��#���#"�������������#��#�����@�"���#�����#�#��������#"���� ���
3–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
))2������� �������� ��� ���C������ ���"���"���������3
� �=����"����="#"���+��" "#"�
� (�@�""�������+��" "#"�
� �#�++"��� ���
� ��#��"�"������"#� ��=����"#���+���@�"����#
))2����. ������#������#������������H�#�#��"��.�"���� ����"#����� "#"��#��#"�� �� ��������#��#"�� �� ��3
� -���#��"�������#����#���#�#��"��� ������������� ���"�����"G����+$�����#��#�� ����
� ( ���� ���"����#�#��������#�+��" �� ��� �����"�"�����#����#�" �#���#���#�#��"��� ��
� A� "��#��#�������#��������#�� �##���#��#���.�"���� ��
����)������)�@�"����#�2 ���"��������������#���������"#��� ���.��"#"�� ���*����#����������� ���C������ ���"���@��#"�������������#�*������������#������"#������#����@�"����#�#������#�#���� ��������*
����
Manufacturing and Distribution Planning
3–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing Work Centers
)��"���#�����*����#��"�+���#"���#��#���������#��#���+��" "#"������������+ ��������"+�����#���#�����*����#��"�����"��C��� �.�C������������#���"#�"����"#"�� ���*����#���>���� �����"+���#����� ����������#�������#��++"�"����������#" "G�#"����+�#�����*����#������#�������
>�������� ����"�#�"������� �"�+���#"����.��#�����*����#���"�� ��"��3
� 2�����"�#
� 2"��� ��������
� D��.���+�����"���������*�
� ����"G�
� 6��*+ ��� ���#"��
� )�#�
Before You Begin
� ��#��������#��*��������#��*�"#������������������� ���������� ������"��#����������������� ���������
� ��#����������*����#�������"��#����������.�"�����"#�����!��"���#����������������"��#�������������������������+
���%��''�� �������
1���#���2�"��"��)�����0�����"#��2 ���"��������78 �$9���������#�0���������*����#�+
$� �����*��"#����*����#��� ���#��#�����*����#��
�� ��������*����#������� "�*��� ��#�
Manufacturing and Distribution Planning
3–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����*����#��5�#��)��""������"���#���+� ��"���+"� �3
� ��*����#�
� �"��#���8���
� <���#"���6����
� ��*����#������
� 2"���<���
� �"#"�� ��0�
� )�������++�#
:� � "�*�#��������"#��,���"+#�#�.�������"���#���+� ��"���+"� �3
� �#�����������"#�
� 6����
� �����"#��;�5
��"�"�#�����+�� #���"#��+����������)��"�����*����#��<����
� 5"�"���������"#�
� 5�="���������"#�
� F��
� ��"+#
Reviewing Work Centers
3–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4� � "�*�#���F���,��++"�"�����#�.�������"���#���+� ��"���+"� �3
� E�����F��
� 5����F��
� )�� ����F�
� �++"�"����
� ;#" "G�#"��
����� /&��������
��*����#� -���#"+"����.�������� ��#�
D�#�3�>���������#�����.�����������#��"��#�"�+"� ��
�����#���"��#C/�#"+"��#����7+���=��� �����$�
��������S�S�S���$� 9��>��������#�"�@�"�����.�"��
��"#�+����"�����������������#��"#��
�"��#���8��� (���#��������������#���������*����#���"#�"����
���� �.�"�����"#��1���=��� ��������������#�"�����
#�������"�" ������"�������#"�����#��+����� ���*
���#��#��#����#�#������.�"�����"#�
<���#"���6���� (������#��#������#����"��C ��� �.�"�����"#��;��#�"
�����#���+��#����.�������� ��#�#��#��"��#�����
����#���#���/�.����"��������#� ���C ��� �.�"��
��"#���.��"��#��#��"#��1���=��� �3
� 6����02 ��#�755�;9� ���#�(�75�;9� ���#�6�75�;9� ��.�$� �75�;9
6�"�����"#����"#��"�.�������#����"���C ���
.�"�����"#�
��*����#������ (������#��#���+"���#���#�����+���*����#���A� "���� ��
���3
� �#����� ������*����#�
$ 2����#"��� "���"�������#"#"������"�����#
2"���<��� (������#��#���#��"���"+�����*����#��"�����"����
�.��"�#��"���������#���� ������"��� ���������"�
)������)�@�"����#�2 ���"������������"#�
)�@�"����#�2 ���"����� �� �#"���#������ ��� ���
��+" ��
A� "���������3
< )��� �.�������� �
5 5���"��������� �
6 )��� �.��� ���#��� �.�����
� 5���"���� ���#������
� �#���7�" ���#������#����������"#9
Manufacturing and Distribution Planning
3–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
�"#"�� ��0� (������#��#�"��"��#�����#���#�����*����#��"��"#"��
����#��"#"�� ������#����#����� �� �#�������"#���A� "�
�� �����3
D D�#����"#"�� ���*����#��
$ (��"#"�� ���*����#��"���� �� �#"���))2��� ��
� (��"#"�� ���*����#��"���� �� �#"���)��2����
�)2�
(��"#"�� ���*����#��"���� �� �#"���))2��)��2�
�����)2�������#���� ���"� �������� ���*
���#������������ ��#������$����������"�
#�"�+"� ��
: D�#��������"#����*����#��������#������
��#�"�� ����#�"���*����#��"�������"#�
� ���"���
D�#�3�������#��� ��#"���"����#���+��#���#��#������
��#�"��������+�"�+���#"����"#��#����)2�����)��2
������
)�������++�# (��� �������"��#���)������2�+" ��#�. ��71 � 9�#�
��#��"���#������.���+�����#��#�#�����#�� �����+��
��*����#����������� ��.���++�#�+���#���+����#��
�������#��
�#�����������"#� ����#�����������"#�� ��� ��#���"����������#"��� "��
��� ������#��
�����"#��"�#�#���"����"#��������
�����"#��;�5 (���"#��+�����������#���=���#��������"#���+��
�����#"��� "����+���=��� ���#���"����"�/��#"�������
�����
5"�"���������"#� ���� ���� "�"#������"#��.��������"���#��������#"��
"������ ����#�����#�����"��� ���"����"����.�
���������#��.�������+��#���������++"�"���"�����#�
���������
�����"#��"�#�#���"����"#��������
5�="���������"#� ��������� "�"#������"#��.��������"����������#"��� "��
�����#��������
�����"#��"�#�#���"����"#��������
6���� (������#��#������#���.�"�����"#����"�"#���"����
#�����"+��+�����"���.����0� ��#�#���� "��#������
���"�"����"+#�����+������*����#��
F�� �������.���+���*�����#��#�#�������+��#�"���� ��#
����#���������
Reviewing Work Centers
3–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
��"+# (������+"���������7��0�F9�#��#�"���#"+"����" ����*
�"+#��-������ ��#������������������"+#������#�����
�������#�����������#�#��#������ ���#�������#"������
1������ �����#"�����#�3
-+������� ������ ������*����"+#�+����"������"+#��#�
�"++���#"� �"���� "��. �����#��#��#��"+#���������#��
��� ����H���#�������������������#��#����"+#���
#������ ����H���#�����������������#������#����#�
#�����������#���#"�����������������#��#"���
-+������� ���������"��� ����*����"++���#��"+#�����
��#��#����"+#����������������� "��. ��#"������#�
���"���#�����+�� #��� ���
E�����F�� ����#�#� �����#��#��������"��=���#���#��.��"��@����
�#���*����#���������"���.�#�������*����#��
�����#���#���#�"��� ���"��#���-#���6�����#�. �
71:$��9��>��������� �� �#��#�"��� ����"���#���<���#"��
)� ���������������������#��"#������ �����������
���#���<���#"���)� ����������#����#������"��
����� ���#"���������� �#��#���#�. ���"#���� �� �#��
�� ���
5����F�� ����� ����������#��#�����@�"���#�������#������
+���#�"�����#"���#��#�����=#�����#"���"��#������
��*����#��
-+�#���)��#"���5�#���� ������. ��*��#����#��
�#"����#�����+�� #��� ���+���#�����*�������#"���
F�������#����#������#������ ����� ��+�
.��*����� "�����"�. �� ���#"���"#���
*�� ,������������� �����+++++++++++++ ++++++++++++++
-+����� �����#���F���+"� �����#���)��#"���)��""��
+���. ��*��#����#������#����� ���"��#�"�+"� ��+�
���#"������������ "����� �� �#"���
)�� ����F� ����#"����@�"���.�+����������"��� ���#"�������
�� ������#�*��.������" �. ��+���"#���� �"��� ���#"���
��"��� ���"������� ��+��*��.�����������"���"�
�����1 ���5��������#�
Manufacturing and Distribution Planning
3–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
�++"�"���� (������+"������ ���#��#�"��"��#�������++"�"��# ������*
���#������#�����"��� ������ ���+��#��#�++
�++"�"�����������������#������ ���"��#�"�+"� �������#��
5��"+����#�.����*����#���++"�"�����+"� ��"��#�����.
�����5���+��#�"������#��#�#�. ��71 ��%9�"��#�#��>�
#����#������#����������#���������#�76:9�+���#��
��#��� �� �#���+���#����"��#� �.����#�76$9�
1���=��� ���"+�#������#��#�"��#�#��>��#����� ����+�#�"
+"� ��"���Q������#����"��#� �.����#�"�$���#����#��
���#����6:���#���������#�+����"��#���-#�����#
��������#�(��C���#�. ��71 ���&9�
����)�+���)������;�"#�������� �����#�"��� ��
������+�� #�������� �� �#"����#��������"#��
��#�������#������ �����.���1���=��� �����#����Q
��������
D�#�3������#����=���#�#��#�#�����#"���#"�����#���
+�����������#�����#�����#�� �#"���"#�#�*��#������ �#�
�������#"�����++"�"�����������#��++��#�#�#� ���#�
�++"�"�����������"��������+�#�����#�"�#���"++���#
��#���������#���++"�"�����������#��������#������#"��
��.��*����� "����+�����*�����
;#" "G�#"�� (������#����#��#�"��"��#������"�#��"�� ������*����#�
"�.�"����������"��� ������ ���+��#������"�������-#
"�#����#"���+�#����"��#�#"����������+�������#"��
��#"�"#"��#��#���� ����������
����)�+���)������;�"#�������� �����#�"��� ��
������+�� #�������� �� �#"����#��������"#��
��#�������#������ �����.���1���=��� �����#����Q
��������
3–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Determining Available Capacity
>�����#���#��"�����������������#"��������"#��������*����#�������>�����#��"�������*����#�H����" �. �������"#��������"��������.����#�"����������"#��
>������������#����#��������#����������"#��������������#��#�������� ���;��#���8����#��)������;�"#�������#����#���#"�� ����� �� �#�#�����*����#������������#��������#����������"#��.�������������7F)9���"#��+��������)��"����"#������ ��"+����������#����*����/�#���#�
>��������"�����������"#�+���"++���#���"#��+�������"���"++���#���*���#���1���=��� ��������"��#����#�#���#"��#��#���@����+��#������������#��#���"#������� ���#��������������#������������"#���
�����#��"������" �. �������"#������� �#��#���+� ��"���#�*3
� 8����#����������"#���#���#"�� �
� )��"����������"#������ ��7��#"��� 9
Before You Begin
� A�"+��#��#���*����#���="#�+��� ���������"#�#��#�������#�����������#���!��"�������+
� ��#�����+�� #���"#��+�������"��#�������"�����#"���
Generating Resource Units Automatically
1���#���2�"��"��)�����0�����"#��2 ���"��������78 �$9��������)�+��)������;�"#�
)���#���)�+���)������;�"#�������#����#���#"�� ����� �� �#��#�����*���#�������>��������"���#����� #������#�0�������)������;�"#�
>������ �����#�"���������������������"��#�����������������#��5���+��#�"������#��#�+����#������.���+�����"���"������*����#�����#�����.���+���� ������"�����#������*����#���>�������� �����#��������#����+"�����������"#�+�����"+"��#"�����"���
Manufacturing and Distribution Planning
3–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����#������ �� �#��#�����������"#�+������*����#��.�������#��+� ��"���"�+���#"��3
� F����������"��#�����*����#��5�#��#�. ��71 ��&9
� �����+ ����� ����
� 5���+��#�"������#��#�#�. �
"������3�(�������� ��������#��#�������*��#��#�����"#������#�0������)������;�"#��" �.������"##���������������)�+���)������;�"#�
Resource Unit Calculations
�������������#���+� ��"�����������"#��� �� �#"��3
,�������������������
�������������>���,�
D��.���+�����"���P���*�����������
9�����������������
�������������>9��.�
D��.���+���� �����P���*�����������
Before You Begin
� ��#��������+��#�"������#��#������'�������������������'���� �+
� ��#��"���#���.����0� ��#�+����"����������#�#�������#���������"#�
� A�"+��#��#�������#������� �����+��#���#"�����"����������"+��"��#���
Processing Options for Refresh Resource Units
Defaults Tab
���������"�����#"�����+"�����+�� #��� ���
1. From Date
;��#�"�����"�����#"���#�����"+��#���.��"��"�����#��#��#�#����#���������������#"�����������"#����#��#���.��"��"�����#����� ��#�����#��+��#����� �����������#����@�"��#�"�����"�����#"���.�+��������������#�������#"���
Determining Available Capacity
3–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2. Thru Date
;��#�"�����"�����#"���#�����"+��#������"�����#��#��#�#����#���������������#"�����������"#����#��#������"�����#����� ��#�����#��+���#���� �����������#����@�"��#�"�����"�����#"���.�+��������������#�������#"���
3. Branch/Plant
;��#�"�����"�����#"���#�����"+��#���.����0� ��#�����#���.��#����#���"�#�����*����#��)������;�"#�#�. ����������������#����������"#����#�#���.����0� ��#���� ��#���.����0� ��#�+���#���6�"���;�"#�5�#�������+������"�����"�����#"���"��@�"���.�+��������������#��������#"���
Process Tab
���������"�����#"�����+"�������"����"#�"��
1. Shift Code
(������+"���������7�&0�F9�#��#�"���#"+"��#���#�����+��"+#��1���=��� ��������"��#������������
���������"�����#"������"+��#����"+#������#��.��"�� �����"��#����������"#������#"����>���������#�����#��"=��"++���#��"+#���������#��#���������� ��#�"#�+���#����� ��#�;����+"��������+����-+����� ������ ��"+#�����. ��*��#����#���������� ��� "���"+#�+��#����@��#���.����0� ��#�
2. Shift 2 Code
(������+"���������7�&0�F9�#��#�"���#"+"��#���#�����+��"+#��1���=��� ��������"��#������������
���������"�����#"������"+��#����"+#������#��.��"�� �����"��#����������"#������#"����>���������#�����#��"=��"++���#��"+#���������#��#���������� ��#�"#�+���#����� ��#�;����+"��������+����-+����� ������ ��"+#�����. ��*��#����#���������� ��� "���"+#�+��#����@��#���.����0� ��#�
3. Shift 3 Code
(������+"���������7�&0�F9�#��#�"���#"+"��#���#�����+��"+#��1���=��� ��������"��#������������
���������"�����#"������"+��#����"+#������#��.��"�� �����"��#����������"#������#"����>���������#�����#��"=��"++���#��"+#���������#��#���������� ��#�"#�+���#����� ��#�;����+"��������+����-+����� ������ ��"+#�����. ��*��#����#���������� ��� "���"+#�+��#����@��#���.����0� ��#�
Manufacturing and Distribution Planning
3–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4. Shift 4 Code
(������+"���������7�&0�F9�#��#�"���#"+"��#���#�����+��"+#��1���=��� ��������"��#������������
���������"�����#"������"+��#����"+#������#��.��"�� �����"��#����������"#������#"����>���������#�����#��"=��"++���#��"+#���������#��#���������� ��#�"#�+���#����� ��#�;����+"��������+����-+����� ������ ��"+#�����. ��*��#����#���������� ��� "���"+#�+��#����@��#���.����0� ��#�
5. Shift 5 Code
(������+"���������7�&0�F9�#��#�"���#"+"��#���#�����+��"+#��1���=��� ��������"��#������������
���������"�����#"������"+��#����"+#������#��.��"�� �����"��#����������"#������#"����>���������#�����#��"=��"++���#��"+#���������#��#���������� ��#�"#�+���#����� ��#�;����+"��������+����-+����� ������ ��"+#�����. ��*��#����#���������� ��� "���"+#�+��#����@��#���.����0� ��#�
6. Shift 6 Code
(������+"���������7�&0�F9�#��#�"���#"+"��#���#�����+��"+#��1���=��� ��������"��#������������
���������"�����#"������"+��#����"+#������#��.��"�� �����"��#����������"#������#"����>���������#�����#��"=��"++���#��"+#���������#��#���������� ��#�"#�+���#����� ��#�;����+"��������+����-+����� ������ ��"+#�����. ��*��#����#���������� ��� "���"+#�+��#����@��#���.����0� ��#�
Revising Resource Units Manually
>���������"����������"#������ ��"+����������#����*����/�#���#�#�#�����1���=��� ��������"��#������#����*����/�#���#�#��������#�+�����"�������#"�������� ���������#"����>��������������#����� ������#����#�0�������)������;�"#�+���#��������#�+������� ������������ ������#"�������"#"��� ��"+#��������#"���#"���
"������3������#"����������)�+���)������;�"#��#������������ �� �#�#���+����� �����������"#����������� ���������.�������"�+���#"���"�#�����*����#��5�#��#�. ��71 ��&9��#��������1 ����� ���������������#���5���+��#�"������#��#�#�. ��71 ��%9�
Determining Available Capacity
3–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%������������������������
1���#���2�"��"��)�����0�����"#��2 ���"��������78 �$9���������#�0�������)������;�"#�
$� �����*��"#��)������;�"#������ �#��#���+� ��"���+"� �3
� ��*����#�
� 6����02 ��#
�� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*�1"��3
� 5��#�
� >��
� )��"���#���+� ��"���+"� �3
� ;�"#��+�5����
� ��*����#���++"�"����
� ��*����#��;#" "G�#"��
:� ������#��������+����"����������#�#����"����������"#������ "�*�� ��#�
4� �����*����#��)������;�"#�)��""�������� �#��#���+� ��"���+"� ��+����������"��#�������+ ����� ����3
� )������;�"#���*��$
��#��#������.���+���"#����" �. ��"��#��#���*����#��#��#�����.�������#�����"#��+��������1���=��� ���"+�#�����"#��+������
Manufacturing and Distribution Planning
3–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
"�����7F)9����#��#������.���+��������" �. ��"��#��#���*���#��#��#�����
����� /&��������
6����02 ��# (������#��#������#����"��C ��� �.�"�����"#��;��#�"
�����#���+��#����.�������� ��#�#��#��"��#�����
����#���#���/�.����"��������#� ���C ��� �.�"��
��"#���.��"��#��#��"#��1���=��� �3
� 6����02 ��#�755�;9� ���#�(�75�;9� ���#�6�75�;9� ��.�$� �75�;9
6�"�����"#����"#��"�.�������#����"���C ���
.�"�����"#�
��*����#� -���#"+"����.�������� ��#�
D�#�3�>���������#�����.�����������#��"��#�"�+"� ��
�����#���"��#C/�#"+"��#����7+���=��� �����$�
��������S�S�S���$� 9��>��������#�"�@�"�����.�"��
��"#�+����"�����������������#��"#��
��*����#���++"�"���� (������+"������ ���#��#�"��"��#�������++"�"��# ������*
���#������#�����"��� ������ ���+��#��#�++
�++"�"�����������������#������ ���"��#�"�+"� �������#��
5��"+����#�.����*����#���++"�"�����+"� ��"��#�����.
�����5���+��#�"������#��#�#�. ��71 ��%9�"��#�#��>�
#����#������#����������#���������#�76:9�+���#��
��#��� �� �#���+���#����"��#� �.����#�76$9�
1���=��� ���"+�#������#��#�"��#�#��>��#����� ����+�#�"
+"� ��"���Q������#����"��#� �.����#�"�$���#����#��
���#����6:���#���������#�+����"��#���-#�����#
��������#�(��C���#�. ��71 ���&9�
����)�+���)������;�"#�������� �����#�"��� ��
������+�� #�������� �� �#"����#��������"#��
��#�������#������ �����.���1���=��� �����#����Q
��������
D�#�3������#����=���#�#��#�#�����#"���#"�����#���
+�����������#�����#�����#�� �#"���"#�#�*��#������ �#�
�������#"�����++"�"�����������#��++��#�#�#� ���#�
�++"�"�����������"��������+�#�����#�"�#���"++���#
��#���������#���++"�"�����������#��������#������#"��
��.��*����� "����+�����*�����
5��#� ������ ��������#��+��#�"��� �����
>�� ������ ���������+��#�"��� ������
Determining Available Capacity
3–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
;5 (������+"���������7��0;59�#��#�"���#"+"��#�����"#��+
��������#�+����������#���@���#"#���1���=��� ���"#
���������#���.�� ��.�=����."����#��� "#�����������
�����
��*����#��;#" "G�#"�� (������#����#��#�"��"��#������"�#��"�� ������*����#�
"�.�"����������"��� ������ ���+��#������"�������-#
"�#����#"���+�#����"��#�#"����������+�������#"��
��#"�"#"��#��#���� ����������
����)�+���)������;�"#�������� �����#�"��� ��
������+�� #�������� �� �#"����#��������"#��
��#�������#������ �����.���1���=��� �����#����Q
��������
Processing Options for Work Center Resource Units
Defaults
1. Enter the Default Unit of Measure for Work Center Resource Units. If left blank, HR will be used as the default Unit of Measure.
Unit of Measure as Input ____________ Work Day Calender (P00071) ____________
Manufacturing and Distribution Planning
3–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Generating Resource Profiles
<���C����� ����"�����#"��#���+���������� ������������@�"���#�����#� ����/��#"���������#��"��� ���C����� �����#����#�������������+" ���������������+" ��"��� "#��+�� ���*����#������#��"� ����@�"����#�+������#�C����� ���"#����������������+" ��"�#�������+�� �.�������"���������#��������@�"���+��� ���*����#������+��� ���#"��#����� #" ��� �." ��+���#�"� �+������#�C����� ���"#���
>������������#����#�����#���#"�� �������#������������+" ����������������� ����#��#�����+" ��
���� �#��#���+� ��"���#�*3
� 8����#����������+" ����#���#"�� �
� ��+"�����������+" ������� �
Generating Resource Profiles Automatically
1���#���2�"��"��)�����0�����"#��2 ���"��������78 �$9��������8����#�)������2�+" ��
-+������������+"����." ��+���#�"� �76�59�������#"���+���������"#������� ��+�"#��.���. "��������������8����#��)������2�+" ��#����#���#"�� ������#��#�����������+" ��������������� �� �#��#��� �����������*����#�.���=#���"���#�������"��#�����#"���.��#���+����#���@���#"#"��+��#����#�C����� ���"#���
����8����#��)������2�+" �����������#����"#��+��������� ��"�����7F)9����#��#�����������+" ������� ��"+��������#�#������#�����"#��+������
Manufacturing and Distribution Planning
3–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
8����#��)������2�+" ���������������#��#�����������+" ���"����������#��"#���++��#"�"#����#���"#�"��#�����"���#��#��������"+���������"+"��"#����++��#���.��#��������������#��"����.��#���+� ��"���+��#�3
� �����#����#"������#"����� ��+��6�5���������#�#��#�����++��#"���"#�"��#���������+��++��#"�"#����#��"��#�������"�����#"���+��#��������#"���
� �����#������#����������+" ���� ��+���6�5���������#��"#��++��#"�"#����#��#��#�����"#�"��#����++��#"�"#����#���"�����#��#���"#������#�������"�����#"���
� �����++��#"���1�����#��"��#�����������+" ��"�#��� �#�#��+�#�����#��"�#�������"�����#"����#���6�5����#�����#"����++��#"���1�����#��
� �����++��#"������������#��+����������+" ��"�#����� "�#��+�#�����#�"��#�������"�����#"����#���6�5����#�����#"����++��#"�����������#��
����+� ��"�������"��" �#�#��� �#���6�5�������#"����"#���++��#"�"#����#�#��#�����"#�"��#����++��#"���1��������++��#"������������#���
Regeneration Effectivity Dates:4/01 – 10/31
BOMComponent 1:
1/1 – 2/28
BOMComponent 2:
3/1 – 11/30
BOMComponent 3:
2/1 – 8/15
Operation Sequence 1 Operation Sequence 2
Included in generation
1/1 1/31 2/28 3/31 4/30 5/31 6/30 7/31 8/31 9/30 10/31 11/30 12/31
Generating Resource Profiles
3–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Before You Begin
� ��#��� ���� "��. ��." ��+���#�"� ����#"����������*����#�������#��+� ��"���#��"��"��#����������&�������� ��������-
� !��"���#�����������������
� !��"���#�����������
� !��"���#���!��"�������
Processing Options for Resource Profile Regeneration
Process
1. Enter the effectivity dates for the regeneration:
Effective From: ____________ Effective Thru: ____________
Defining Resource Profiles Manually
>�������� ����#��#�����+" ��"+������������#���+"����." ��+���#�"� ������#"���+���������"#����>�������� �����#�������� ���#����+����#�#���"#����������������#�
Before You Begin
� ��#��"#���.����0� ��#�"�+���#"���������������������� ���������� ������"��#����������������� ��������+
������������������������������
1���#���2�"��"��)�����0�����"#��2 ���"��������78 �$9���������#�0�������)������2�+" ��
$� �����*��"#��)������2�+" ��)��""�������� �#��#���+� ��"���+"� �3
� -#���D��.�
� 6����02 ��#
�� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*�1"��3
� �*"��#����*����#�
� ;�"#�����
� ������#��������+����"����������#�#����+"�������������+" ������ "�*��� ��#����� "�*�(���#����#����������������+" ��
Manufacturing and Distribution Planning
3–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
:� ���)������2�+" ��)��""�������� �#��#���+� ��"���+"� ������� "�*�T3�
� �++��#"���1��
� �++��#"������
� ;�"#�����
� �"���6�"
����� /&��������
�++��#"���1�� (���#��#��#�"��"��#�������+�#���+� ��"��3
� ���������������#���#�����"�#���++��#������." �+���#�"�
� ���������#"���#�������"�#���++��#�����@���������#�����#"���+�����"#��
� ��������#������� ��"�"���++��#
������+�� #�"�#�������#��#�����#���>���������#�
+�#����++��#"�����#����#��#�#����#���� ���+�
�����"�����������-#���#��#������� ������++��#"���"�
#���+�#�������#" �.������������������"G���"��2����#
��#"���������1 ���5��������#�����������"#�
)�@�"����#�2 ���"��������5�#�"� �)�@�"����#
2 ���"����#�����#��"����� "����������#�.�
�++��#"�"#����#�����#�.��#���." ��+���#�"� ���""��� ��� �
�����+����"� �����#��.�������#����++��#"�"#����#�
������#��
Generating Resource Profiles
3–23OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
�++��#"������ (���#��#��#�"��"��#�������+�#���+� ��"��3
� ���������������#���#�"���� �����"���++��#�����." ��+���#�"�
� ���������#"���#���"���� �����"���++��#�����@���������#�����#"���+�����"#��
� ��������#������� ��"���� �������#"��
������+�� #�"������.�� $��+�#�����+�� #�������+"����"�
#�����#���"�#"�����+�����#����������>����>������
��#��+�#����++��#"�����#����#��#�#����#���� ���+�
�����"�����������-#���#��#������� ������++��#"���"�
#���+�#�������#" �.������������������"G���"��2����#
��#"���������1 ���5��������#�����������"#�
)�@�"����#�2 ���"��������5�#�"� �)�@�"����#
2 ���"����#�����#��"����� "����������#�.�
�++��#"�"#����#�����#�.��#���." ��+���#�"� ���""��� ��� �
�����+����"� �����#��.�������#����++��#"�"#����#�
������#��
;�"#����� (������#��#�"��"��#��#���#�����+���������"#����"�#��
�"#��#�"���*����#���2�". ��#������3
$ )���<�.��F��
� ��#���<�.��F��
5���"���F��
% 5"�� ������7�#��������������������9
�"���6�" (������+"���������7 �0�69�#��#�"��"��#����������"��
�� �.����������=�����+���������#���"���.�"
�����"���#"+��#���#"���.�"����#��#��.������+�
����"����� �.��������#����+���������#"���#���
1���=��� ����4��������$������"������$4�������
$�������"�����>���������"�#�"��#���#"���.�"������"�
�"���6�"������
�����#������#����� ���"��#������"�#"��C��+"� ����
#���;����+"���������+���+����#"������������ "��
�� �� �#"�����������"�#"���"����#�#�������������#�
.�#�"���#�����"���� �� �#"���
Manufacturing and Distribution Planning
3–24 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3–25OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Generating Resource Requirements Plans
1���#���2�"��"��)�����0�����"#��2 ���"��������78 �$9��������)�����)�@�"����#�2 ���"���
(+#�������������#������������"#�������������+" ����������#��������#��#������#��#����������@�"����#�� ��������� ������#�"� ���C������#"��#���+�#��������"#��������#�������*����#�������������"��#�"�� ���3�
� �������.���+������#"���#�++�#��#����������#���"������#�����#�+�#�������#"�������
� �������.���+����"#"��� �����"���#��#������" ������+�������������# "��
� ������ ��#�#��#��#������" ������#��.���+�����"#"��� �+��" "#"�
6�������������#���+����#�"��� �����+���*�����+�� ���C������ ���"���#�����#��#��#�#�"����������#��"�����#"��#���+������"#�������.�������#��+����#��������������+" ���++�#��@�"�����#��+�������"#��
����#�����+���#��#��#������������#��"�� ���3
� ���C�����"#��������C�����"#�������
� 2�"�������"���.��#���*����#�
� D��� ������+" ��"�+���#"���.�������#���#�����+���*����#�� ���3
� )�#�����+" ��"�#������" �. ����"#�+"����+���#���)������;�"##�. ��71 ��!9
� <��������+" ��"�#���+����#��� ������"����+���#�����#�� ������"#��H�+����#�����#��"���������+" �
� 2����#�����������"�#��� ��������+" ���"�"����.��#����#����+" �
� )���������" �. ��"�#����#�����+" ���"���#��� ��������+" �
� (����� �#������������" �. ��"������"���#�#� ��+�#�����������" �. �
Manufacturing and Distribution Planning
3–26 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����������#����#�����"���+��� ���"��������������@�"����#����������#����#��"�����#��� ��#"���+��#���+� ��"��3
"�� ��������������� >���������*�������+�#���+� ��"�����*����"��3
D 2������ ������"#"�� ���*����#�
$ 2�����"#"�� ���*����#��"���� �� �#"��
�������@�"����#�� ����� �
� 2�����"#"�� ���*����#��"���� �� �#"��
�����"#���@�"����#�� ����� �
2�����"#"�� ���*����#��"���� �� �#"��
�������@�"����#�� ������������"#�
�@�"����#�� ��
: D�#��������"#����*����#��7�" ���#�.�
�������"��#��������"#��)�@�"����#
2 ���"����#��9
.�����3�������
�����������
>�������� ��#�#���+� ��"���+��� ���"���+��" "#"�����
�"��#�������3
� (����"+"��� ���"���+��" "#����#����"��#���������.�#�
� (�������+�� ���"���+��" "#"����#����"��#��������"���#���)(D8����<-����� �����.�#�
Before You Begin
� A�"+��#��#���������"#��="#�+��� ���*����#��"������+��" "#������&���� ����������������������+
� A�"+��#��#���������+" ���="#�+��� ���#�C����� ���"#���������������������������������+
� A�"+��#��#�#�����������+" ��"��#�����"#��#��������"�#����"#��+�������>��������������="�����+�+"�����"#��+�������������������������������������+
� ���#������#�" �+����#�+��#�����#�C����� ���"#����"���#����#�0�������1����#������������!��"���#���&�����*���������"��#��*���������������+
� ��#��"�����"���+����#�#�����������#�#�����"��#��������#"����>�������������="�����+�+"��������'��������'� ���*���������"��#��*���������������+
� ��#����#�������+ ����� �����+��� �������#"�����"���+����"���������#�#�������#���������@�"����#�� ��������'������������������������� ������"��#���'���*��������� ��������+
Generating Resource Requirements Plans
3–27OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
See Also
� �����#�������������.���� ����������+��"�+���#"������#����� #��+#�����#��#�+��������#"���)������)�@�"����#�2 ��
Processing Options for Resource Requirements Planning (R3380)
Bucket Information Tab
���������"�����#"���� �������#�����"+��#���������#"���#�#���#���#��� ���"�����"G�����"��������#�����#�������"���"����� ���"��������
1. Regeneration Start Date
;��#�"�����"�����#"���#�����"+��#�����#��#��#�#������������#��#�#�#��� ���"�����������"���#��"�� ��#���.��"��"����+�#���� ���"�����"G����-+���� �����#�"���#"���. ��*��#����#������#����#�����#��
2. Planning Horizon Periods
Planning Weeks
;��#�"�����"�����#"���#�����"+��#������.���+����*�#��#�#����#��"��"��#��"����� ���"�����"����1���=��� ��������#����#����"� ���#����"����"��������72 :$ 9��#����#���� ����������#��+��#������.���+� ���"������*�
Number of Months
;��#�"�����"�����#"���#�����"+��#������.���+����#��#��#�#����#��"��"��#��"����� ���"�����"����1���=��� ��������#����#����"� ���#���"�����"��������72 :$ 9��#����#���� �����������#� ����#��+��#�����.���+�� ���"������#��
3. Past Due Periods
;��#�"�����"�����#"���#���"� ���#������.���+���#�������"���#��#�#���#��������#��+���� ��������+" ���������� ��������#�#������.���+��#�������"���+��#��������H������#"�����#���A� "���� �����3
� ����"���7��+�� #9$ ������#�������"��� #�����#�������"��
Manufacturing and Distribution Planning
3–28 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Process Tab
���������"�����#"���� �������#�����"+��#���.�����#��#����#������+�#����)20)��2�2 ���"���)������#"���������7) ��9�����#��������#����+������#�����������#��������"#���(��"#"��� ���������#��"������#���������#���*����#��#��.��� ������.���"��#��������"��#���� ���"���
1. Branch
;��#�"�����"�����#"���#�����"+��#���.�����#��#�#����#������+��#���)20)��2�2 ���"���)������#"���������7) ��9�
2. Under Rated Capacity Percent
;��#�"�����"�����#"���#�����"+��#��������#������#����#��������"#��#��##����#������#����#��"������#�������*���#��"����� ������������#���"� ����������"#����#�#���+�;�7����9�+�������"#�� ����#��#���� ��#���#���"���#"+"��������#���������#����#����� ���
1���=��� ���"+�#����#��������"#��"�$�����"#�����#��������#��������"#��"��##��4Q��#����#����#���#" ����"����������"#�� �����+�%4���"#������� "�� ����#�����*����#����"�" � ���#����#������ �����"����������"#�� �����+�%:��"#���������� ����
3. Over Rated Capacity Percent
;��#�"�����"�����#"���#�����"+��#��������#�����#����#��������"#��#��#�#���#������#����#��"������#�������*����#��"���� ������������#���"� ����������"#����#�#���+���7���9�+��#��������"#�� ����#��#�"����#�#����#���"���#"+"��������#��������#����#����� ���
1���=��� ���"+�#����#��������"#��"�$�����"#�����#�������#��������"#��"��##��4Q��#����#����#������ ��#" ����"����������"#�� �����+�$�4������� "� �����#�����*����#����"�" � ���#����#������ �����"����������"#�� �����+$�&���"#��������� ����
4. Roll Up to Dispatch Group
;��#�"�����"�����#"���#�����"+�����#����� #"� ����*����#���"#�"����"��#��������� ����#��#��#��"��#��������+����"����A� "���� �����3
6 ��* �����#���������#�� ������*����#��#�����"��#��������$ �����#���� ������*����#��#�����"��#��������
Forecast Types Tab
���������"�����#"���� �������#�����"+��#���+����#�#����#��#�#����#�������������"#����#���)������)�@�"����#�2 ���"���������7) ��9�
Generating Resource Requirements Plans
3–29OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
>���������#�����#��+"���+����#�#����"��#����#����1����#�#��������C��+"��������#����"��#�����#�" �1����#�#�. ��71 :&�9�
1. Forecast Type 1
;��#�"�����"�����#"���#�����"+��#���+����#�#����#��#�#����#��������������������#���)������)�@�"����#�2 ���"���������7) ��9��1����##���������C��+"�����������#����"��#�����#�" �1����#�#�. ��71 :&�9�
2. Forecast Type 2
;��#�"�����"�����#"���#�����"+��#���+����#�#����#��#�#����#��������������������#���)������)�@�"����#�2 ���"���������7) ��9��1����##���������C��+"�����������#����"��#�����#�" �1����#�#�. ��71 :&�9�
3. Forecast Type 3
;��#�"�����"�����#"���#�����"+��#���+����#�#����#��#�#����#��������������������#���)������)�@�"����#�2 ���"���������7) ��9��1����##������������+"�����������#����"��#�����#�" �1����#���. ��71 :&�9�
4. Forecast Type 4
;��#�"�����"�����#"���#�����"+��#���+����#�#����#��#�#����#��������������������#���)������)�@�"����#�2 ���"���������7) ��9��1����##���������C��+"�����������#����"��#�����#�" �1����#�#�. ��71 :&�9�
5. Forecast 5
;��#�"�����"�����#"���#�����"+��#���+����#�#����#��#�#����#��������������������#���)������)�@�"����#�2 ���"���������7) ��9��1����##���������C��+"�����������#����"��#�����#�" �1����#�#�. ��71 :&�9�
Unit of Measure Tab
���������"�����#"���� �������#�����"+��#�����"#��+�������#��#�#���#���������������������#���)������)�@�"����#�2 ���"��������7) ��9�������#���������������#��+"�����"#��+��������#���#"���
1. Unit of Measure 1
;��#�"�����"�����#"���#�����"+��#�����"#��+�������#��#�#����#��������������������#���)������)�@�"����#�2 ���"���������7) ��9�
Manufacturing and Distribution Planning
3–30 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2. Unit of Measure 2
;��#�"�����"�����#"���#�����"+��#�����"#��+�������#��#�#����#���������������#���)������)�@�"����#�2 ���"���������7) ��9�
3. Unit of Measure 3
;��#�"�����"�����#"���#�����"+��#�����"#��+�������#��#�#����#��������������������#���)������)�@�"����#�2 ���"���������7) ��9�
4. Unit of Measure 4
;��#�"�����"�����#"���#�����"+��#�����"#��+�������#��#�#����#��������������������#���)������)�@�"����#�2 ���"���������7) ��9�
5. Unit of Measure 5
;��#�"�����"�����#"���#�����"+��#�����"#��+�������#��#�#����#��������������������#���)������)�@�"����#�2 ���"���7) ��9�
3–31OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing Resource Requirements Plans
��������������#�����������@�"����#�� ����#����#������#����#"���"��#��#�����#��� ������"��������� ���"�����"���+������*����#���-+��������"G������ ���*����#�������"��#�������������"���#��������+���#"����"�" ������#"������#���"������#"�������������"���#��������#��������#��������#"���� ����++��#������"#���+�#�����*����#�����������
�����"����������@�"����#�� �������� �#��#���+� ��"���#�*3
� )��"����"��#��������+��))2
� )��"�����*����#�� ����+��))2
� )��"�����"�������"�
� )��"�����������#�"
� A� "��#���������@�"����#�� ��
>���������"�������"���+��������"���#����#��"���#��� ����#��#�"�� �����������*����#��.�������"#����������>�������� ����"���������+��������*����#�������� �#���� ������#����� ��������
-+�#����#���������#�����C�����"#��������C�����"#������"#"�������������"���#���� �������"���#"+��#�����"�������*����#��"����"���#������"#"���������-#��"��#�.���������#����/�#�#���+����#��������"#������#������#��#����������@�"����#�� ������"��
Reviewing Dispatch Groups for RRP
-+����� ���*����#���������"G��������"��#�������������������"���#�������#����#��"������������"#���++��#�� ��+�#�����*����#��"��#���������"��#�����������. ������#������"G����*����#�������"���#��������+���#"����"�" ������#"������#���"������#"����
�����������"����"��#������������������ ����"����������.��#�� �#����*����#��"��#���������������#��#�"�+���#"���#����"#".�#��#��� ����"#�"��#��������
Manufacturing and Distribution Planning
3–32 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%��'������������
1���#�����" ��)������)�@�"����#�2 ���"��������78 $$9��������)��"���"��#���8����
$� �����*��"#�������"#��5����������������� �#��#���+� ��"���+"� �3
� �"��#���8���
�� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*�1"��3
� �"#"�� ��0�
� 5���������
� ;05
� )��"���#���+� ��"���+"� �3
� ��##���"���5����
����� /&��������
�"��#���8��� (���#��������������#���������*����#���"#�"����
���� �.�"�����"#��1���=��� ��������������#�"�����
#�������"�" ������"�������#"�����#��+����� ���*
���#��#��#����#�#������.�"�����"#�
Reviewing Resource Requirements Plans
3–33OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
�"#"�� ��0� (������#��#�"��"��#�����#���#�����*����#��"��"#"��
����#��"#"�� ������#����#����� �� �#�������"#���A� "�
�� �����3
D D�#����"#"�� ���*����#��
$ (��"#"�� ���*����#��"���� �� �#"���))2��� ��
� (��"#"�� ���*����#��"���� �� �#"���)��2����
�)2�
(��"#"�� ���*����#��"���� �� �#"���))2��)��2�
�����)2�������#���� ���"� �������� ���*
���#������������ ��#������$����������"�
#�"�+"� ��
: D�#��������"#����*����#��������#������
��#�"�� ����#�"���*����#��"�������"#�
� ���"���
D�#�3�������#��� ��#"���"����#���+��#���#��#������
��#�"��������+�"�+���#"����"#��#����)2�����)��2
������
5��������� (������#��#��"#"���"����"++���#�������#��#���
�����#���"��#��������"#��2 ���"����#����A� "������
��3
( ���"��������
5 5���� ������
� ���������"#�
; ;���������"#�
;05 (������+"���������7��0;59�#��#�"��"��#��#���@���#"#�
"����"���#���=������"����#���"#����+���=��� �����
7���9���6R�7.�=9�
��##���"���5���� (�."�+����"�#"����+����"#�������*�����=� ���#"���
*�� ,������������� �����+++++++++++++ ++++++++++++++
(��������+�#�����#�" ���������+��#�����*����#��
1���=��� ���"+�#�����*����#�����+�������C�����"#�
������7������#����;9��#�"�+"� ���"� ���;;;;�
Manufacturing and Distribution Planning
3–34 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Capacity Message Summary
Defaults
1. Enter the Critical Work Center ____________ Code to be displayed or blank for all Work Centers. 2. Enter the Capacity Mode: ____________ ’1’ = Resource Requirements ’2’ = Rough Cut Capacity ’3’ = Capacity Requirements 3. Enter the default Unit of ____________ Measure.
Versions
Enter the version for each program. If left blank, version ZJDE0001 will be used.
Work Center Revision (P3006) ____________
Reviewing Work Center Load for RRP
����))2����������"���������"�� �.��*������.��� ���"�����"�����+�#�������"#�� ����� ������������*����#���;��#�"�"�+���#"���#����#��"�����#���#����/�#������"#����#���+����#��
���������"��#���2"���<����+"� �������*����#��5�#��)��""�����#��"��#���#�����+� �����1���=��� ���"+�������#������"��������#���������#���"��� ����������#������.��#��#��������"++��+���#����#��#�������"+������#������"��������� ��
�� �� �#"���+��#���#�����+� ������3
*���������� ���������#��+������"#�����" �. ��+������*����#��
9����������� ���������"#��#��#�"��@�"���#�����#�#���+����#�
<��������+" ��?�7+����#�@���#"#��P� �.��������"��
���9�0�7�++"�"�����P��#" "G�#"��9�P�#"���.�"�����
������������������� ���� ��������+" ���"�"����.��#����#�����+" ��
*��������%������� �����#�����+" ���"���#��� ��������+" ��
��������������������
�%�������
(����"���#�#� ��+����������" �. ��
Reviewing Resource Requirements Plans
3–35OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����#����#����� �� �#��#����������"#�"��++�#�.��#���)�������++�#��� ��+���#���)������2�+" ��71 � 9�#�. �������)�������++�#��� �����#��"��#������.���+�����#��#�#�����#�� �����+�����*����#����������� ��.��++�#�+���#���+����#���������
Before You Begin
� 8����#��#���))2��"#��� ���������#���������"#������#� ���#����
���%��''�� �������������**�
1���#�����" ��)������)�@�"����#�2 ���"��������78 $$9��������)��"����*����#��<����
$� ���)��"�����*����#��<��������� �#��#���+� ��"���+"� ������� "�*1"��3
� ��*����#�
�� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*�1"��3
� �#�#���#�
� ;�"#��+�5����
� )��"���#���+� ��"���+"� �3
� ���"�#"��
Manufacturing and Distribution Planning
3–36 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
���"�#"�� (������+"��������������*�
*�� ,������������� �����+++++++++++++ ++++++++++++++
-��#���������������"�#"����+�#����"��� ���������+�
#�����*����#���-��#�����#�" �����������"�#"����+�#��
*"����+���#��#��#�������"��#��#����
Processing Options for Capacity Load
Defaults
1. Enter the Capacity Mode: ____________ ’1’ = Resource Requirements ’2’ = Rough Cut Capacity ’3’ = Capacity Requirements 2. Enter the User Defined Code for ____________ the list of row descriptions to appear. 3. Enter the default Unit of ____________ Measure. 4. Enter the version of the ____________ Dispatch List program to call. The default is ZJDE0001.
Versions
Enter the version for each program. If left blank, version ZJDE0001 will be used.
Operation Dispatch Inquiry ____________ (P31220)
Reviewing Period Summaries
-�����"#"���#����"��"���#��������"#�� �����+�����*����#������������ ���� ��#��#��� ����#��#�"�� ������������*����#������ ��#��#��� ����.����"������.��"#����>���������"��3�
� ����"#���#��#��������� ���+������*����#��
� �������.���+���"#��+����"#���#��#���*�����#��� ����
� ���������#��+�#���#�#� � �������#�����*����#��#��#�"�+�������"+"�"#��H�+����#�������#�������"G��#��� ����.��#�����"����"���#����"#��+�������#��#��������"+��
>������#�"�"�+���#"���#����#��"������#���#����/�#�#���+����#���#�������"#���#�#�����*����#��
Reviewing Resource Requirements Plans
3–37OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%��'��������������
1���#�����" ��)������)�@�"����#�2 ���"��������78 $$9��������)��"��2�"����������
$� �����*��"#��2�"����������)��"�������� �#��#���+� ��"���+"� �3
� ��*����#�
�� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*�1"��3
� ;�"#��+�5����
� 2�"���1��
� ��
� )��"���#���+� ��"���+"� �3
� 2�"���1��
� -#��
� ;�"#
� 2����#
� ����D��.�
Manufacturing and Distribution Planning
3–38 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Period Summary
Defaults
1. Enter the Capacity Mode: ____________ ’1’ = Resource Requirements ’2’ = Rough Cut Capacity ’3’ = Capacity Requirements
2. Enter the default Unit of ____________ Measure. 3. Enter the version of the ____________ Dispatch List to call. The default is ZJDE0001.
Versions
Enter the version for each program. If left blank, version ZJDE0001 will be used.
1. Work Center Revision (P3006) ____________ 2. Forecast Revision (P3460) ____________ 3. MRP/MPS Message Revision ____________ (P3411) 4. Mfg Scheduling Workbench ____________ (P31225)
Reviewing Message Detail
�����#"���#��#����������#�����������@�"����#�� ����#����#������#�������#��"���#"+����*����#������� �������+ "�#��"#��� �����������"#��)��"���5�������#�" �"��"��#�����#��������������� ���������� �������"#"����5�����+���������*����#��������� ���.�#"�� ��.�������#�����
;��)��"���5�������#�" �#��� ������ ������� �#���������>��������#����������"#���������>��������������*�+�������������#�������#����#"�������#�*���-�����"#"������������������ �#���+���#�����+"������������#��������#����������+��#�"�����#��+��*���� ��#�+��#�����*����#��
>������������#����� �������#�������������������������#����������@�"����#�� ����#����#����� �#��� ��������=���#�#���+� ��"��3
� 5�����#��#�������#��������� �
� 5�����#��#������ ���������� �
Reviewing Resource Requirements Plans
3–39OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%��'�������������
1���#�����" ��)������)�@�"����#�2 ���"��������78 $$9��������)��"��5�������#�" �
$� �����*��"#�������"#��5���������� �#��#���+� ��"���+"� ������� "�*1"��3
� ��*����#�
�� )��"���#���+� ��"���+"� �3
� 5������
� 5����
� ��#� �;�"#
� ;5
� 2����#
� 2 �����)���*
� ���� ������������� ��#�"#������������ ���+���#���)��������
���������� ������������"#���� ��������������#���)��"���5������#�" �+���
:� ����"���� ����������������*�#���-�� ����� �����.�=������ "�*�1"���
Manufacturing and Distribution Planning
3–40 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4� ����� ����� �������������� ��#�"#�����������F� �0)� ����+���#��
)��������
5���������� ������"�� "��#���������#����#�"���� ����������#" ��������� ��� ������ �������� �#��#����
&� ����� �#������������ ��#�"#�����������)��""���+���#���)��������
!� ��������"#��5�����)��""����������#�������"#��#������������� "�*��� �#��
Processing Options for Capacity Planning Message Revisions
Defaults
1. Enter the Capacity Mode: ____________ ’1’ = Resource Requirements ’2’ = Rough Cut Capacity ’3’ = Capacity Requirements 2. Enter the default Unit of ____________ Measure. 3. Enter the default version of ____________ Work Center Revision (P3006)
Validating Resource Requirements Plans
A� "��#"������������@�"����#�� ������"#��+�"���#"+�"���#������ �������*����#�����*"�����/�#���#�"��+����#�������������������#"���#��� ������"��#��������#���������/�#���#��"#".�#���#��� ����������#����*����#��
$� ���� �#��#���#���+����"��"���#����������@�"����#�� ���
���������#�������������.���� ���������+
�� )��"��#���+����#�
����!��"���#���'� ���/��&�����*��������"��#���*���������������+
� ���� �#��#���#���+��������#"���#����������@�"����#�� ���
������������������������.���� ���������+
:� )����#�#���#�����#" �� � �����#��������*����#����������"�#��
3–41OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Validating Master Schedules
(+#���������#��#�����#������� ����� "��#��"#�#�������#��#����������++"�"��#���*����#�������"#���;��#���)�������#������"#��2 ���"���7)��29.�#���������#�������#�������"#��� ���"���"�+���#"���
-��������������+#�����#�������.�#��������������#�������"#��� ���"��"�+���#"���+��.�#��)��2����������"#��)�@�"����#�2 ���"���7�)29�������� ��"++������"�"��#�����*����#��#��#�����"���#"+��"��#�����#��� ��#"��������#������+"������� ������52����*�����������#"���"�#��#"���+�"���#�#��)��2�
-+��"#"�� ���*����#��������"��#�����#"����+���������#���*�����#��#��������#���.��5�#�"� �)�@�"����#�2 ���"���75)29��#����#����#�������� �"�� ����5)2�����"��)��2��.������.�#��)��2������)2����#�������.�#��������
�����#��������#��#���+� ��"�����#��#�+���)��23
� ���C�����"#����������C�����"#�������
� ��*����#�� ���
� 2�"��������
�������"���������+���"#"�� ���*����#��"��"#��� �.��������"���������"��������"���������� ��"������#�����*����#�H������"#���(���*���#��"�������.�� �.��"+����"������ �����#��#�����*����#��"����������"#���(���*����#��"�������.������"���"+����"�������"���"����������"#���;��#���2"���<��������������*����#��5�#��)��""���#����+"��#������"���������
A� "��#"���#�����#������� �����"#��+�#���+� ��"���#�*3
� 8����#"����������#������"#��� ��
� )��"��"�����*����#�� ����+��)��2
� )��"��"�����"�������"��+��)��2
� )��"��"�����*������ ��+�������#"���#�#�
� )��"��"����#������� ��������*����#�� ���
Manufacturing and Distribution Planning
3–42 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+� ��"���#������"���#��#�+������#���"�����#������� �3
*������������ ������������"#�"��"��#��#�����"#�#��#�������"�#��
�"#������*����#��+���������*�������#�����*����
�� �����������#����"� �����������"#�������
��"#������#��������#��+ ���������������������"
"�+���#"���"����"�#����"#������*����#��+������
��*�������#�����*������� �����������#������#�"
"�+���#"���#��.��*����� ����*�����"��#�������
1 ���5��������#��#�������#���� �� �#�����" �. �����
+�������"#��� ���"����>������������ ����#������"�
��������"#�"�+���#"���+���������*����#������+�
�������*�����"���#�����#�0�������)������;�"#
������
"�� ����������� ;��#���)�+���)������;�"#�������#����� �� �#��#��
��*����#�������>������#�"��������� ��+�
����"�����#���-#�������#�����������"�#������#�
F����������������"���#����� #��+�#�����#�����#
�+�������#"������#�����*����#��)������;�"#
+���
Generating Rough Cut Capacity Plans
1���#���2�"��"��)�������#������"#��2 ���"��������78 �$9��������)������#������"#��2 ��+
;��#����������#������"#��� ���7)��29�#��������������#"���52��������@�"����#�#��#��������"#�����" �. ��"���"#"�� ���*����#���)��2�"��"��#����#���������� ����"��#�����#������� ��#�����#��+��". ����*� �����"������#�������+� "�"#���������
��������������#��#���)��2��#����#��3
� -���#"+"���"#"�� ���*����#�
� -���#"+"��#������"���������+���"#"�� ���*����#�
� �� �� �#��#����#��������"#��+���"#"�� ���*����#�
� �� �� �#��#���52�� ����+���"#"�� ���*����#�
����� �� �#���#��������"#��+���"#"�� ���*����#���#����#������#��
+� ��"���#������+��� �3
D��.���+���� �����7������"��9�P������������P��++"�"�����+��#��P�#" "G�#"���+��#�
Validating Master Schedules
3–43OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
>������������ ���� �� �#���++"�"�����.���"�"�"���#����������.����#�� �����1���=��� ���"+�"#�#�*��������$������#������ �#����/�.�#��#���#�����������#�. "�����#��������#�������"���*"����#���������#�++"�"�����7��0�$��?����9�
1���+�������#���"���������#"���7��#�� �����0�#���������9�"��� ���� "G�#"���
;#" "G�#"���"��� �� �#���.��+"��"���#������.���+�����"��������#��#�#�����*���#��"���#�� �����" �. ��+����*"�����������#��#�������$��������#�#" "G�#"���"�������� "#"����� �.�����������#"�����"�#����������� ����.��*�������#���+��#��#��"�� ���++��#��#" "G�#"���
>����� �� �#��#���52�� ����+���"#"�� ���*����#��.���"����"#���#�����#"��#�. ��+��� ��������*�����7O2<�9���#�����#"���"�#��#"���#�. ��+��+"���*�����7O��9��"#������#"����##�������-+�#�����*�����"�+"��7����"��#��#���������"����#��9�.�#�������#����������#"���"�#��#"����##�������#���#������#�����#"���#�. �������+��� ��+���� �� �#"���52�� ������3
2 ����������P����"�������+���#�����#"���#�. �
1"������P����"�������+���#�����#"���"�#��#"���#�. �
���������"��#���2"���<����+"� ��"��#�����*����#��5�#��#�. ��71 ���&9��#��"���#���#�����+����"����#�#�����*����#��
����#"������.��*����� ����"���#������� ��"��"��#��������1 ��5��������#��#������"�����#"�������� ��� ���� ����"�#��#��������#"��+�����>�����#���#��#���#"���.�"��������������@���#"#��"�#��#����@��#"��+�� ������ �� �#"���
�����#������#���+� ��"���+��� ��#���� �� �#��#��� ����+���������#"��3
��*�����@���#"#��P����.���+����"������������#"��0#"���.�"�����
�����#��������#��������#��#�"��"��#�����#������� ����"����C�����"#�������C�����"#��
Before You Begin
� )���#���������@���#"#"��+������#"���#��#�������� �#������#"� ����� �#��#�������#��#�#���+"����+��)� �����<�������"�"���+��="#"�����*������������#�������������������)�������%���������"��#���'���*��������� ��������+
� A�"+��#��#���������"#��="#�+��� ��"#"�� ���*����#��"����������#"��������'������������������������� ������"��#���'���*��������� ��������+
Manufacturing and Distribution Planning
3–44 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ��#������� �������������"�� �"���� ��+��)��2������'��������'��������&� �����������������+
� )���#���5�#��2����#"��������� �����������������������'�����,$���������'���������
Processing Options for CRP/RCCP Planning Regeneration (R3382)
Process Tab
���������"�����#"���� �������#�����"+��#�����"�. ��"�+���#"���#��#�#���#������#��������#��#����)20)��2�
1. Under Rated Capacity
;��#�"�����"�����#"���#�����"+��#��������#������#����#��������"#��#��##����#���#" ����"������������ ��������*����#��������#����"� ���������"#����#�#���+�;�7����9�+���������"#�� ����#��#�"� ��#����#��"���#"+"��������#���������#����#����� ���
2. Over Rated Capacity
;��#�"�����"�����#"���#�����"+��#��������#�����#����#��������"#��#��#�#���#����"� ���������#��������������� ��������*����#��������#���"� ����������"#�������#�#��7���9�+�������"#�� ����#��#�������#��#���#���"���#"+"��������#��������#����#����� ���
3. Branch
;��#�"�����"�����#"���#�����"+��#���.�����#��#�#����#������+��#���)20)��2�2 ���"���)������#"���������7) ��9�
4. Supply/Demand Inclusion Rule
;��#�"�����"�����#"���#�����"+����"������ �������������"�� �"���� �#��#�#����#������+��#��������#"����+����"#�������� �������������"�� �"��� ����+"���#����"#�"��#��#�#����#������#��� ��#���#"�������+�����"���
5. Capacity Mode
;��#�"�����"�����#"���#�����"+����"��������"#�������#����#�������A� "��� �����3
� �����#�������������#������"#��� ���"��� �����#�����������"#���@�"����#�� ���"���
Validating Master Schedules
3–45OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6. Unit of Measure
;��#�"�����"�����#"���#�����"+��#�����"#��+�������#��#�#����#������+�.��*����� "���#��������"#�� �����������+�� #���"#��+�������"�F)�7���9�
7. Roll Up to Dispatch Group
;��#�"�����"�����#"���#�����"+�����#���#����#���� ������ #"� ����*���#��#�����"��#��������+����"����A� "���� �����3
6 ��* ��*����#�������#�� ����#�����"��#��������$ ��*����#��� ����#�����"��#��������
See Also
� ����������������������������
� �����#���������'� �����
� �����#���&������������
� �����#���!��"'���������������������'�����
� �����#�������'����������!��"������$����
Reviewing Work Center Load for RCCP
;��)��"�����*����#��<����#����"���#��� �������������"#��"�+���#"���+�#�����*����#��#��#������ ��#������ �������������"#��"�+���#"������������#���2"���<���������#��#�������#����+��#�����*����#�������*����#�)��""���
Manufacturing and Distribution Planning
3–46 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%��''�� �������������*���
1���#�����" ��)�������#������"#��2 ���"��������78 $�9��������)��"����*����#��<����
$� ���)��"�����*����#��<��������� �#��#���+� ��"���+"� ������� "�*�1"��3
� ��*����#�
�� )��"���#���+� ��"���+"� �3
� �#�#���#�
� ;�"#��+�5����
� ���"�#"��
Reviewing Period Summaries for RCCP
;��)��"���2�"����������#����"������"+"��"#���#��#���*�����#��������"#� ����+������+"������"���+������*����#���>��������"���#�����#�" ��+�� ����#�����+�#�������#��#������.��������� ���+������*����#��
�����#�������"G��#��� ����.����"����"���#�����"#��+�������#��#����� ��#�������#���� ������#��������#�����+�#�#� � ����� ������+��#��#��"���+�����"#�������������
Validating Master Schedules
3–47OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%��'�����������������*���
1���#�����" ��)�������#������"#��2 ���"��������78 $�9��������2�"���������C�)�������#������"#��
$� �����*��"#��2�"����������)��"�������� �#��#���+� ��"���+"� ������ "�*�1"��3
� ��*����#�
� ;�"#��+�5����
� 2�"���1��
� ��
�� )��"���#���+� ��"���+"� �3
� 2�"������
� -#��
� ;�"#
� 2����#
� ����D��.�
Manufacturing and Distribution Planning
3–48 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing Work Schedules for Production Status
;������#"����"��#���-�@�"��#�� ���#����������#����*����#������� "��"�+���#"������"���*.��������"�����#���������#�#"�����"�#�+����*���#������� "�������#���� �����+���*�#��#�������+ ����;��#�"�������#�3
� (������*�����"�+���#"����"�� ��"���#����������#�����#� "#������#����#"���"�#��#"��
� )��"�����*�����"�+���#"������������*����#������"�"��� �.����������"��������#������
� ��#���*�����.��#�#���#����@��#�����#���������#"���#�#������
� �������#�����*�����#�#��������#�#���#������@��#�����#�
���%��''�� ���������������������������
1���#�����" ��)�������#������"#��2 ���"��������78 $�9������������#"���"��#���-�@�"��
�����*��"#������#"����"��#�������� �#��#���+� ��"���+"� ������� "�*1"��3
� ��*����#�
� ��������#�#�
Validating Master Schedules
3–49OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
��������#�#� ;����+"����������#��� $��#������������#�������#"��
#�#��"����������������"�#�#��� ��#���*����
"�+���#"���#���"� ���
Processing Options for Operation Dispatch Inquiry
Defaults
1. Enter the Default OPERATION Status Information to preload to the screen at initial inquiry. If left blank, no value will be preloaded:
From Status ____________ Thru Status ____________
2. Enter the Default Number of Days:
Prior to todays date for the From ____________ Date After todays date for the Thru ____________ Date
Versions
Enter the version of Work Order Parts Inquiry to execute. If left blank, ’ZJDE0001’ will be used:
Work Order Parts Inquiry Version ____________
Process
1. Enter ’1’ to subtract Quantity ____________ Cancelled/Scrapped from the Remaining Quantity. If left blank, the remaining quantity value will include cancelled/scrapped quantity.
Reviewing Rate Schedule and Work Center Loads
;�������� ��)��"���#����"���#����#������� �� ��������#�����*����� ���+������*����#���>���������"�������������*�������#���+�#����#������� � ��������#�����*����� �����>�������� ��� ��#������"+"����#�������+���"���#���"���#��� ����+��#�����*����#���-+����������#����/�#�#�������� �� �����#�#�����*����#�������������������� ��"++���#�+��������"���#���*����/�#���#��
������ ��)��"���"������"��" ��+���#�C.����"#�������"����� #���#"���+��"��"���#��� �����������*����#���(�����"�����#"���� �������#��"�� ��� ���������#���.������*������.�+������+#���#�� ����
Manufacturing and Distribution Planning
3–50 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%��'���������������'�� �����������
1���#�����" ��2���"���C�)���#"#"��������78 $$49����������*����#������� ��)��"���
$� �����*����#�������� ��)��"�������� �#��#���+� ��"���+"� ��#�� ���#�������*����#������� �3
� 6����02 ��#
� ��*����#�
�� ���������������������� �#��#���+� ��"�����#"��� �+"� ������� "�*1"��3
� ��������
� �++��#"���1��
� ���
Processing Options for Work Center Schedule Review
Defaults
1. Document Type ____________
A specific document type Blank = No default
Validating Master Schedules
3–51OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Disp Options
1. Subfile Dates ____________
1 = Monthly 2 = Weekly 3 = Daily
WO Processing
1. Include Work Order Generated ____________ Loads
1 = Before Rate loads 2 = After Rate loads Blank = No Work Order loads 2. From Operation Status ____________
Include as an active operation Blank = No specific status to include 3. To Operation Status ____________
Include as an active operation Blank = No specific status to include
Versions
Exit Versions
A specific version Blank = ZJDE0001
1. Rate Revisions (P3109) ____________
Manufacturing and Distribution Planning
3–52 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3–53OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Validating Material Requirements Plans
(+#�����������#��#�����#�"� ��@�"����#�� �������������� "��#��"#�#������#��#�����������++"�"��#���*����#�������"#���;�������"#��)�@�"����#2 ���"���7�)29�#����#��"������#���#�����#�"� �� �������.���=���#����"#�#������" �. ��������
>���� ������)2�#�3
� (�� �G��� ���#"�����*����#�
� -���#"+��#������"���������+����*����#�����"���"��"#��� �.�������"����������"��������"������ ��"����������*����#�H������"#�
� �� �� �#��#����#��������"#��+����*����#�
� �� �� �#��#���5)2� ����+����*����#�
-��������������+#�����#�������.�#��������������#�������"#��� ���"��"�+���#"���+��.�#���)2�����)�������#������"#��2 ���"���7)��29��>����������#����##"���"��#�������"�����#"���#�����������#��#����"++���#�@�"����#�+���)2�
�����"�����"++������.�#������)2�����)��2���3
� �)2���� �G��� ���#"�����*����#��"�#�����+��� ��#����"#"�� ���*���#�
� �)2��++������� #���#"���#�� ��� ������� ������#"���+���
�����#������#���+� ��"���"���#�#���)23
� 1"��5)2���*�����������#"���"�#��#"��
� 2 ������5)2���*�����������#"��
� -�#�� ��#�������
�����#��������#��#���+� ��"�����#��#�+����)23
� ���C�����"#����������C�����"#�������
� ��*����#�� ���
� 2�"��������
Manufacturing and Distribution Planning
3–54 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
A� "��#"���#�����#�"� ��@�"����#�� ������"#��+�#���+� ��"���#�*3
� 8����#"��������"#���@�"����#�� ��
� )��"��"��������"#���@�"����#�� ��
����������#��#��������#���� "��#��#�����#�"� ��@�"����#�� ������#������������#��#��������#���� "��#��#�����#������� ��+���)2��52������)��2�
Before You Begin
� �)2�+� ���#������� ��� ��+�����#"��� �� ���"�����5)2��>������ �������"G��#���+� ��"���"�+���#"���+��.�#��5)2������)23
� ����� ���"�����"G��
� ������*������������#�#���
� ����#�#���"��#������ �������������"�� �"���� �
See Also
� 0��������������'��������+����#�" ���"�+���#"�����������#"��������"��"���#���)��2
Generating Capacity Requirements Plans
1���#��2�"��"��)�����0�����"#��2 ���"��������78 �$9�������������"#�)�@�"����#�2 ���
;��#��������"#��)�@�"����#�2 ���������#��������������#"���5)2�������@�"����#�#��#��������"#�����" �. ��"����*����#����)2�"��"��#����#���������� ����"��#�����#�"� ��@�"����#�� ���#�����#��+��". ���*� ������"������#�������+� "�"#���������
Before You Begin
� )���#���������@���#"#"��+������#"���#��#�������� �#������#"� ����� �#��#�������#��#�#���+"����+��)� �����<�����������#������������������)�������%����������"��#���'���*��������� ���������
� A�"+��#��#���������"#��="#�+��� ���*����#��"�����������#"�������'������������������������� ������"��#���'���*��������� ���������
Validating Material Requirements Plans
3–55OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ��#������� �������������"�� �"���� �������'��������'��������&� ������������������
� )���5)2������#"���������������������������.���� ���������+
See Also
� �������������������������������+��"�+���#"������#�������"����#"��
� �����������������������������"+��������#�#�������#��#���"�+���#"������� ��"�#�����+�.��.�#�������"��
Reviewing Capacity Requirements Plans
��������������#���������"#���@�"����#�� ����#����#������#����#"���"��#��#�����#��� ������"��������� ���"�����"���+������*����#���-+�������������"G������� ���*����#�������"��#�������������"���#��������+���#"����"�" ������#"������#���"����#"�������������"���#��������#�������������"#���++��#�� ��+�#�����*����#��"��#��������
>���������"�������"���+��������"���#����#��"���#��� ����#��#�"�� �����������*����#��.�������"#����������>�������� ����"���������+��������*����#�������� �#���� �������� ���������-+�#����#���������#����C�����"#��������C�����"#������"#"��������������"���#���� ������"���#"+��#�����"�������*����#��"����"���#�������"#"���������-#��"��#�.��������#����/�#�#���+����#��������"#�����������#��#��������"#��@�"����#�� ������"��
�����"���#��������"#���@�"����#�� ������������"++���#���"����+�#������������#��#���������#����"���#����������@�"����#�� ���
���� �#��#���+� ��"���#�*3
� )��"����"��#��������+���)2
� )��"�����*����#�� ����+���)2
� )��"�����"�������"��+���)2
� )��"���5)2���*������ �����#����"��#��� "#
� )��"���5)2��#������� ��������*����� ���
� A� "��#��#��������"#���@�"����#�� ��
Manufacturing and Distribution Planning
3–56 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing Dispatch Groups for CRP
1���#�����" �������"#��)�@�"����#������78 $ 9��������)��"����"��#��8����
-+����� ���*����#���������"G��������"��#������������������"���#�������#����#��"������������"#���++��#�� ��+�#�����*����#��"��#���������"��#�����������. ������#������"G����*����#�������"���#��������+���#"����"�" ������#"��������#"���#���
�����������"����"��#������������������ ����"����������.��#�� �#����*����#��"��#���������������#��#�"�+���#"���#����"#".�#��#��� ����"#�"��#��������
�����������"����"��#��������+���)2���������#�������������������������"����"��#��������+��)������)�@�"����#�2 ���"����>����������#����##"���"��#�������"�����#"���#�����������#��#����"++���#�@�"����#�+���)2�
See Also
� �����#���&�������������������
Reviewing Work Center Load for CRP
1���#�����" �������"#��)�@�"����#������78 $ 9��������)��"�����*���#��<����
>���������"���#��������"#�� �����#��������*����#���;��#�"�"�+���#"���#���#��"������#���#����/�#������"#����#���+����#�������������#����"��������"�� �.��*������.��� ���"�����"�����+�#��� ����� ������������*���#��
)��"�����*����#��<����+���)2����#���������������)��"�����*���#��<����+��)������)�@�"����#�2 ���"����>�����������#����##"���"�#�������"�����#"���#�����������#��#����"++���#��@�"����#�+���)2�
Before You Begin
� A�"+��#��#�������������"#����������"#���@�"����#�� ����������#�
See Also
� �����#���!��"������$���������
Validating Material Requirements Plans
3–57OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing Period Summaries for CRP
1���#�����" �������"#��)�@�"����#������78 $ 9��������2�"����������C�����"#��)�@�"����#�
-�����"#"���#����"��"���#��������"#�� �����+�����*����#�������������� ��#�#��� ����� ������������*����#��.��"#����>���������"��3
� ����"#���#��#��������� ���+������*����#�
� �������.���+���"#��+����"#���#��#���*�����#��� ���
� ���������#��+�#���#�#� � �������#�����*����#��#��#�"�+�������"+"�"#��H�+����#
>������#�"�"�+���#"���#����#��"������#���#����/�#�#���+����#���#�������"#���#�#�����*����#��
�����������"�����"�������"��+���)2���������#�������������������������"�����"�������"��+��)������)�@�"����#�2 ���"����>����������#����##"���"��#�������"�����#"���#�����������#��#����"++���#�@�"����#�+���)2�
������ ��#��#��� ����� ������������*����#��.��"#��������������"���#��2�"����������)���#�
See Also
� �����#���������'� �����
Reviewing MRP Work Schedules on the Dispatch List
1���#�����" �������"#��)�@�"����#�2 ���"��������78 $ 9��������"��#���<"#�
;��#����"��#���<"#�#�� ���#����������#����*����#������� "���"�+���#"�����"���*.��������"�����#���������#�#"�����"�#�+����*����#������ "�������#���� �����+���*�#��#�������+ ����;��#�"�������#�3
� (������*�����"�+���#"����������#���������������#� "#
� A"�����*�����"�+���#"������������*����#������"�"��� �.������"�������������#������
� ��#���*�����.��#�#���#����@��#�����#�����#�#�����������#"��
� �������#�����*�����#�#��������#�#���#������@��#�����#�
Manufacturing and Distribution Planning
3–58 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
-+�����*����#��"���� ������������"��#����"���#���+� ��"���� #���#"���#��"#".�#����#�"� ����� �.���@�"����#�#����*��#�����*����#�� ��������������". �3
� �++�"������#"��
� �����"����"���C ��� �������� ��� �.�� ���
� 2��"�"���� #���#"�����#"��
� (��"����"+#
� ;"���������+����#�����*����#�
� ��#���"��
�����"��#���<"#�+��5)2����#���������������#����"��#���<"#�+��)2052���>�����������#����##"���"��#�������"�����#"���#�����������#�#����"++���#��@�"����#�+��5)2�
See Also
� �����#���!��"'���������������������'������+��#�������"�����#"��+��#�"������
Reviewing MRP Rate Schedule and Work Order Loads
1���#�����" ��2���"���C�)���#"#"��������78 $$49����������*����#������� ��)��"���
;�������� ��)��"���#����"���#����#������� �� ��������#�����*����� ���+������*����#���>���������"�������������*�������#���+�#����#������� � ��������#�����*����� �����>�������� ��� ��#������"+"����#�������+���"���#���"���#��� ����+��#�����*����#���-+����������#����/�#�#�������� �� �����#�#�����*����#�������������������� ��"++���#�+���+�����"���#���*����/�#���#�
������ ��)��"���"������"��" ��+���#�C.����"#�������"����� #���#"���+��"��"���#��� �����������*����#���(�����"�����#"���� �������#��"�� ��� ���������#���.������*������.�+������+#���#�� ����
�����������"�������� ��+��5)2��������#�������������������������"�������� ��+���)2�����52���>�����������#����##"���"��#�������"����#"���#�����������#��#����"++���#��@�"����#�+��5)2�
See Also
� �����#�������'����������!��"������$����
Validating Material Requirements Plans
3–59OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Validating the Capacity Requirements Plan
A� "��#"���#��������"#���@�"����#�� ������"#��+�"���#"+�"���#������ �������*����#�����*"�����/�#���#�"��+����#�������������������#"���#��� ������"��#�����"+�#�����/�#���#�#��#������������������� ���"#".�#���#�� �������#�����*����#��
$ ���� �#��#���#���+����"��"���#��������"#���@�"����#�� ���
���������#�������������.���� ���������+
�� )��"��#���+����#�
������������'����(����)�������"��#���*���������������+
� ���� �#��#���#���+��������#"���#��������"#���@�"����#�� ���
������������������������.���� ���������+
:� )����#�#���#�����#" �� � �����#��������*����#����������"�#��
Manufacturing and Distribution Planning
3–60 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Master Production Scheduling
Manufacturing and Distribution Planning
3–62 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Master Production Scheduling
(���#������� ��"���#�#����#��+����#�#������������=���#�#��������.�������#���#��#"�� �� �������.����#����#�"�#��(���#�C����� ���"#���"�"#"�� �"��"#�"����#���� ���C ��� ���������#����������������*" �� �.���*�������"���������������"�� �C ��� ������ "���"�� "����#������ "����#�#���"#��� ��� ��+���������� "���. ����5� #" ��� ���#������� ��=� ����� ���������������#����������#�"#���
������#������� "�����������"#��+3
� ��#��"�"������#����������7+����#����#�������������"�#�� ��#������9
� ��.#��#"������#����������7"����#����������������������*����9
� �� �� �#"�����#��@�"����#�������������������#���
>������������#������#������� ��+��� �"#�����+������#�������������#"�����"���"�� ������ ��"#���#��#������.�����++��#���.��#����#"���"����#��� �#�����#"����(+#�����������#��#�����#������� �������������"������������#��������
2����"�������#������� �����"#��+�#���+� ��"��3
� ;���#���"���#"���+���������#���#"����"��
� 8����#"���"�� �C ��� ���#������� �
� )��"��"���#���#"����"�
� ��*"����"#���)2052����#��#
� ;���#���"���+����#�������#"��
� A� "��#"�����#������� �
� 2���"�������
� ��*"����"#���� #" ��� ���#������� �
Manufacturing and Distribution Planning
4–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
DRP and Purchased Items
1���"#".�#"���.�"������)2����"������#� "G������#� ��+��"#".�#"��"����#�"���������#��������"��#����� ��"����#�� ����
Tactical Plan
Demand Supply
Forecast Open Purchase Orders
Open Sales Orders Inventory
In Receipt Routing
Product DataManagement
Purchase Orders Messages
Time Series
Supply/Demand Inquiry
DRP
MPS and Manufactured Items
>������52��#�������#��#�����#������� ��+������+��#����"#���������������#���� ����� ��"����#�+��.�#����������"#������
4–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+��#����"#���"��#������������#"����������2���"�����#"������#� ����#����#������#��������#"���
Tactical Plan
Demand Supply
Validated Forecast Firm Work Orders
Open Sales Orders Rate Schedules
Open Purchase Orders
In Receipt Routing
Inventory
Product Data Management Rough Cut Capacity Planning
Purchase Orders Planned Work Orders
Firm Work Orders
Messages
Time Series
Supply/Demand Inquiry
MPS
Validated Master Schedule
Material Requirements Planning
Manufacturing and Distribution Planning
4–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Understanding Time Fences and the Time Series
�"���+����������"�#�"��#"���#��#�����������*���������#���"#����� "��������#"������������������������+#����"�� ����#����+����3�
� 1��G�
� 2 ���"��
� 5������"� ��
����(��������� �������.���+�����+���#��������#"���#�#���#���"#�"�
��"���#����#������ ����#��"� ��������������1�
�=��� ���"+�#��������#"���#�#���#��"��$0� 0�4������#��
+��G��#"���+�����"� ������#���� ���"����#���������#
�"� ����������"#����#���"��#�����@�� �#���$0�&0�4�
���������������� �������.���+�����#��#�#����#������"�����/���#"��
�"#��#���#"���+������ ��#����#��"�������#���+����#�"
�������#��#������.���+������+#��#��������#"���#�#
��#�������#���#"���+������ ���������+���#���+"#�� �
#��#���������� ���1���=��� ���"+�#���#"���+������ ��"��
7��#�����������.�+���#���#"���+������+����#��+#��#��
#"���+����9��#��������#"���#�#���#��"��$0� 0�4������#��
� ���"���#"���+�����"� ������#����#���� ��������"��
#����#�����������#�������$0�&0�4��6��"��"�����
�$0�!0�4��#����#���� ��������"���#��#���+����#�
,������$����������
�$�
�������.���+������+#��#��������#"���#�#���#���"#�"�
��"���#����#������ ���"� ��������������1�
�=��� ���"+�#��������#"���#�#���#��"��$0�$0�4������#��
������+�����"� �������#����#����"� ��������
�"#����#�� ��#�������@�� �#���$0 $0�4�������#������
��#��"� ����������"#����#���+���0�$0�4��� �#��
F�������#���� ���"�����"G���+���������#"������#
#�"���#������"��+ ��#���"�����" �. ��#�����"��#�#� �
�"���+�����������"#"�� �"���#�#��#�����#������� �������#"����"��"�#���"������#��#��+�#�����#������� ��
Manufacturing and Distribution Planning
4–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
EmergencyChanges Only
Planning Fence RuleDescription 1
PlanningFence Rule
Description 2
HaltMessages
Final Assembly andDelivery
ManufactureComponents
PurchaseMaterial
FlexibleSchedule
Today Freeze Planning MessageDisplay
>������"+�����#���5���+��#�"�����#��+���#������.���+������+#��#�������#"���#�#���#��#��.��"�� �����"�������#"���+�������"����D�#��#��+� ��"����.��#�#"���+����3
� �����#���������#�����#�#��������#"���#�#���#�M�#��#�"��#��������+#�#��������#"���#�#���#��"�����$�
� 1������+��#����"#����#����#�������#���*"������������+"����"��#�������1 ����� �����
� 1����������"#����#����#�������#��� ���������
What Are Time Fence Rules?
��������������#"���+������ ��+��� ���"���#��#��� �� �#��������"������" �. ������#�#��#�"�.�������#������#���+�+����#�����#������������#���+����#"�K��������L�1��� ��������8��#�"������#��#�#���+����#�"��������.��#�������#��+�#�����#��������������#��#�����#"���.��*�#�������#����"� ��� ���/�#�����������/�#����� ����-��#���+� ��"���#�. ���#�"���� "��#��� ����8������F��
������������+#�������#���+� ��"���#"���+������ ��+��� ���"��3
*���� ���"�#"���$
� ��#����������
���"�#"����
� ��"������"����#���+����#�����#����������
*���� ���"�#"���$
� 1����#
���"�#"����
� 1����#�� ����#����������
Understanding Time Fences and the Time Series
4–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
*���! ���"�#"���$
� ��"������"����#���+����#�����#����������
���"�#"����
� 1����#
)� ��8�"�#�����+�� #�
*���� ���"�#"���$
� ��"������"����#���+����#�����#����������
������������� ���"���+������ ��F������������
���������#��#������#�#���2 ���"���1�����+"� �����#��
2 ��#�5���+��#�"�����#��+���#��%%%�
*���� ���"�#"���$
� ��#����������
���"�#"����
� 1����#
*���1 ���"�#"���$
� U��
���"�#"����
� 1����#
*���5 ���"�#"���$
� U��
���"�#"����
� 1����#�� ����#����������
What Are the Time Series Calculations?
����#"����"�������#�#������������#������� ���)��"���#���#"����"�#�����"������#���#�������#������"���#���� ���"���#��#�#����#�������#�
����5���+��#�"��������"#".�#"���2 ���"����#������"���#�����"++���##"����"���� �� �#"������+� ��3
� ���"������" �. �
� (��" �. ��#�����"�
� ���� �#"������" �. ��#�����"�
Manufacturing and Distribution Planning
4–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
See Also
� *������������ ����������������
Example: Ending Available Calculation
���"���(��" �. ��7�(9�"�#��������#��+������#����" �. ���#�#��������+���#"��.��*�#��+#��#����#����� �� �#��#����++��#��+�� ���� "������� ��������+�#���#"���.��*�#�������#������#���� ���"���#"���+������ ������#���+� ��"��
�� �� �#"���#���� �� �#��#������"������" �. �������#3�
� (����"#�"��#���#"���.��*�#3
� 6��"��"���(��" �. ��7O6(9
1��#���+"#�#"�����"����O6(�?�@���#"#����������C��+�#��#��*
1�����"�"���#"�����"����O6(�?����"������" �. ��+���#�����"���#"�����"���7?�(9
� ��.#��#������"���#��#���� ���"���#"���+������ �3
� 1����#�7C1���9
� ��#�����������7� ����������"�#�� ��#�������9
� �������"����"�#������"������" �. ��7�(9
����+� ��"���#�. ����������#����#����� �� �#��#��������#��+������#���" �. ���#�#��������+���#"�����"����(����#��#�#��� �#�"G��?� �#�+�� �#���+�#�#��*�?�����#"���+������ ��+��� ���"���?�������� ���#"���?�$������� ���"��+�����"�.�#�������"���+�������+"���
������������
���F����?��� 1 4 5 0 ; 6 8 <
O6( &� :� �4 �4 � � � �
C1��� �� �� �� �� �� �� �� ��
C�� �� $4 :� :4
?�( :� �4 �4 � � � � �
O�)2 $4 �� �� :4 ��
7�����#�#9 $4 �� �� :4 ��
Example: Available to Promise Calculation
(��" �. ��#�����"��7(�29�"�#���������"##�����#"����+����������H�"����#����� ��������@�""#"����>������#�"������#�#�������#� �����"����#��������(� ����������+��#�"���������������"���#��#���52������� ���*������"#���#������"���#��#���(�2�"�+���#"����#�"���#����"�����
��#������"�������������"����#������"�����#�
Understanding Time Fences and the Time Series
4–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
(��" �. ��#�����"�������#�� ���#��������#��"���#"+��"����#���#��#����.�����"���#������#���������#"���+������ ��+��� ���"����������++��#���(�2��1����#�"������"�� �����"��(�2��� �� �#"���
�����#����� �� �#��#���(�2�@���#"#����+� ��3
� 1"#���"���(�2�?���C�����.� �����C��+�#��#��*�O���*�����O�����������O�� ����������C�� ������C���*�������#� "#�������C�"�#�� ��#��������C����������� �#�@���#"#"��#��#�����=�"��
� (+#��#���+"#���"����(�2�?���*�����O������������O�� ���������C�� ������C���*�������#� "#��������C�"�#�� ��#��������C���������� �#�@���#"#"��#��#�����=�"��
�����#���������#��"� �������#"���(�2�+��+� ��"�����"����F������#����#���������#������� �#"������" �. ��#�����"��7�(�29�.��#������#"��������#�
Example: Cumulative Available to Promise Calculation
���� �#"������" �. ��#�����"��7�(�29�"������"���#�#� ��+�#���(�2��
1�����������#�������� ������#��.�" �"���"����#����"��#�.����#��+�#�����������#�#�#�����-��#���������� ��������*�#"����"��#���#�.���=���#��#��� ��"#�"��#����� ��"����#�.��*�#������.� *��+�� ���"��#���#�.��"��#������+�#���
�����#����� �� �#���(�2���+� ��3
� 1"#���"����(�2�?�.��"��"������" �. ��O��� ��"����#�C�����+��#����������������#��������.�+���#�����=#��� ��"����#
� (+#��#���+"#���"�����(�2�?��(�2�+��� �#���"���O��� ��"����#�C����+���#����������������#��������.�+���#�����=#��� ��"����#
�(�2�������#���������� �#����� �#"����)�#����#����#������#"����#�����"����#���
Manufacturing and Distribution Planning
4–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+� ��"���#�. ����������#����#����� �� �#���(�2��(����#��#�#��� �#"G��?�+"=���&����+�#��#��*�?����#"���+������ ��+��� ���"���?�������� ���#"���?$������� ���"���+�����"�.�#�������"���+�������+"���
������
���F����?��� 1 4 5 0 ; 6 8 <
O6( �� 4� �4 44 :4 �4 4� �
C1��� �� �� �� �� �� �� �� ��
C�� � �4 � $� 4
?�( 4� �4 44 :4 �4 4� � $�
O�)2 &� &�
(�2 �4 �� �4
�(�2 �4 �4 :4 :4 :4 !� !� !�
4–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Generating Single-Level Master Schedules
>������������#������#������� ��+����"�� ��"#������ �"#�����������������#������#������� ���#����#������ ��#��� ��#���"�+���#"������+���� �� �#"�������������������#"��C������� ���"�������� ��+��� �� ��#��"#����(#����"�"������������ �������#������#������� �����* ��#��*����#��� �������#�
>��������#�#���8����#"���5��������"�����#"���#�������#�����������"���#�������)������#"�������D�#����������"�����"#����#�����������"����#����#���"�� ������ ��#����"#���#��#��������������"����#��� �#�����#"����;��#���D�#��������)��"���������#����#��"�����"���"#���#�"�� ����"��#�����#�������������#"���
���� �#��#���+� ��"���#�*3
� 8����#������#������� ��+��� �"#��
� )��"���"#���+����#�������
� 8����#������#������� ��+��� ��#���"#��
Before You Begin
� 8����#����+����#�+��"���������#��������"#����������������&�����*���������"��#���*����������������
� 8����#�����������@�"����#�� ����������������������������.���� ����������
Generating a Master Schedule for All Items
1���#����"�� ���"#��2�"��"��2 ���"�������#"��������78 :��9��������)2�52��)������#"���
Manufacturing and Distribution Planning
4–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�)2�����52��������#"������#�������������#�����������"�� �C ��� �)2���52������� ��+��� �"#���#��#����#�#�����#��� ��#"����"#�"�����������3
� )����#���� ��#���+����#���� �����
� ;����#��+���#����)2052�05)2�"�� �"���� ��#���� �� �#��@�"����#�+����#��� ������"#��
� ������#��=� ����� ����������#��#���." ��+���#�"� ���������#
>�������� �������#������#������� ��+��"#����"���+����#�������#"��� ���"���� ��F��1����#�������#"�������������+����#����������"�������.����#�� �� ���������"�������"���������#��#���+����#��@���#"#���6�������"���#���+����#������������"�����������#"�������� �#���+ ��#�#�����#���C#�C��#��"�+���#"����6�+���#��������������#�������� ���"#��� �#��#�������������#"����"��#�. ��+��#���� ��#���"#���
>����������52�0�)205)2���� � �����"��������#���#������#�*�����.�������� �#���"���#����#����-��#������ � �����"�����#�����#����#��� �������#��������"#���"�� #����� ��.���#" "G"����� #"� �����������"��#����#�*��� ������������#����=���#����.�#������������������#��#�������#���������������������� � �����"�����#�������"���"��"+"���#���+���������"�����"������ "�"#����� ��.��#������.���+������#��#�������" �. �������������
�����#������#��������#���.�#�����"���#�������� � �����"����-�#�"���"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������������#������#����������#���=���#��#���.�#�����"���
����������#����������"���#�������#������#������� ���������� ����"���#���+� ��"���"�+���#"��3
$������������ 6���������#��� ��#"������.����0� ��#����#���������
7��� ��5�#��2 ���"���1��" �9������� ���"���������(��
� ��#"���+���.���C���#�. ��+"� ������.���������
$�����+����� �����#�����#���@������+���#������#��=��� ��������#
�������#�"��@�������������"�#�. ���� #��"��#������
See Also
� �������������*������������ ������+�����"#"��� �"�+���#"����������#"�������#������� ���"���� ���"���� ��F
� ��������������������������������+�����"#"��� �"�+���#"������������ � �����"�����*
Generating Single-Level Master Schedules
4–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for DRP/MPS/MRP (R3482)
Horizon Tab
���������"�����#"������"+����#������#"�����"���#�������������������#"���#���� ���
1. Generation Start Date
;��#�"�����"�����#"���#�����"+��#�����#��#������������#��#�#�#��� ���"�����������"���#��"�� ��#���.��"��"����+�#���� ���"�����"G���
2. Past Due Periods
����������"�� ������� �������������+���#�"����.���+���"����"��#�#���8����#"����#�#���#��
A� "���� �����3
� ����"���7��+�� #9$ $���"��� ����"��
3. Planning Horizon Periods
Number of planning days
;��#�"�����"�����#"���#�����"+��#������.���+�����#��.��"�� �����"��#��� ����1���=��� �������������"���#���#"����"������������" ����#��+��#�����.���+�� ���"��������#�������* ����#��+��#������.���+�� ���"������*�#�������#� ����#��+��#������.���+�� ���"������#��
Number of planning weeks
;��#�"�����"�����#"���#�����"+��#������.���+����*�#��.��"�� �����"��#��� ����1���=��� �������������"���#���#"����"������������" ����#��+��#�����.���+�� ���"��������#�������* ����#��+��#������.���+�� ���"������*�#�������#� ����#��+��#������.���+�� ���"������#��
Number of planning months
;��#�"�����"�����#"���#�����"+��#������.���+����#��#��.��"�� �����"�#���� ����1���=��� �������������"���#���#"����"������������" ����#��+��#�����.���+�� ���"��������#�������* ����#��+��#������.���+�� ���"������*�#�������#� ����#��+��#������.���+�� ���"������#��
Manufacturing and Distribution Planning
4–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Parameters Tab
;��#��������"�����#"���#����+"�������"����"#�"���2 ������#��#��+� ��"����.��#��������"����+������#"���#����
8����#"��������$�?�"�� �C ��� �52�0�)2����"������#"���#��������.������"#���"�����"#".�#"������"�����#�+������������#��"#��������#0��������#�� �#"���"�����"��������+��#�"������"�����#��"#�����#0��������#�� �#"���"��
� �������������������#"����"��+�������"#������"+"���"��#�����#�� ��#"����"#����2 ���"���������+�$����#���2 ��#�5���+��#�"�����#��+������#���#���"#���"�����+��#��������������
� 1������+��#����"#��������������"��=� ����������#��#����������#��;�������#"���#����$�"+��������#�#��������� ��#�����#������ �������"#���+"#��������������#�." "G��#�������� ��.�+��� ��"�������������#�����������#�
� D������"��������������#���
8����#"����������?�� ���"���." ��;��#�"������#"���#����#��� ���+��"#���#��#�������� ���"���." ��+���#�"� ��(�� ���"���." ������K�����L�����#�"#���#��#"��������#�� ������+��#�����.�#��#�������#�������#�#��������������"#"����+���������+������#�
��"������#"���#�����=� ����������#�+����#�#��"#���������#�.���� #"� �"��#�������#H�+����#�.��#���1��#���2 ������2����#�7+���#���." ��+���#�"� 9+���������������#������������#�������#��������+����#�+��#����������#��1���=��� ���������������#�"#���."*���"��#��������+����#��+$�����������������"#".�#��#��#�+����#�"�#����+����#��+�$�������#�"�."*���4���#��"���."*�������:��������#��."*��
����+� ��"�����#�.���#��������# ��#�����#�"������#"���#���3
� ��������������#�"#�����#��������2 ���"���������+�:����2 ��#5���+��#�"�����#�
� ������������#���#��������2 ���"���������+�4
� ����1��#���2 ������2����#���#�.���#��������# �
� >�����#����"+��"������"�����#"���#���+����#�#����#������+���#������#������#�����#��+��#�����������#
8����#"�������� �?��� #"C ��� �52�����"������#"���#����"����� #���#"���#������#"���#����$��������+��������� �#��#��C#�C.�##�������"����+���#������ ���"#���������������=� �����������+��� �����#�"#����������"+�"��#�����#��� ��#"��������#��#�����������#��>�����#����"+��� �"#���#��.��������"��#�����#��� ��#"������#�/�#�#�������#�"#��������������� ����#������"��������
Generating Single-Level Master Schedules
4–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
8����#"��������:�?�5)2��"#�����"#���#�52�����"������#"���#�������#������+���#"��� "#���������#"���#���� ��-+��������������������� �#�������#"������#�." "G���������#������� ����������� "�"#���#��� ��#"���#��5)2�"#��7�"#��2 ���"���������+����� 9��#���.������"�������"���#"������"�"��". ��.�������������+���#�����#������� ���"#���"�#" �#����"��#��52�05)20�)2�<����<��� �)�@�"����#�72���"��9�#�. ��
8����#"��������4�?�5)2��"#��+�G���52�����"������#"���#����+��G��#����#������� ���+#��"#����.����#�." "G����6�+������"���#�"������#"���#����������� ����*��� ����������/�#���#�#����#������� ���"#������� ��������#�������#�������������"������#"���#����+��G��#�����#"�� ���"�����"G���"�" ��#��#�������#���+��G��+�����+��G������#��+�#����"G����)���"���#�"������#"���#�������#���+� ��"����� #3
� D�����������" �.��� ������
� D��������+���="#"��������" �.�����#���
� ����(�/�#������"���(��" �. ��@���#"#��"�� �����#���������#"���
� �������"��� ���=� ����������#����������#�+����="#"�����*����������"����C2����������+�������#�"#������ ��C1����������
1. Generation Mode
(����������#"���"�� ���������"#������"+"���"��#�����#��� ��#"����(���#�������"�� ������ ��#����"#���"��#�����#��� ��#"���#��#��������������"���#��� �#�#"����������#���������
A� "���� �����3
$ ��#�������� ���������#"��
2. Generation Type
2 �������#����� ��+��#���2����#��#�.�+����#�" ���"�+���#"���
A� "���� �����3
$ "�� �C ��� �52�0�)2� � ���"���." �� #"C ��� �52�: 5)2��"#�����"#���#�52�4 5)2��"#��+�G���52�
3. UDC Type
;��#�"�����"�����#"���#�����"+��#���;���#�. ��7�#��� :9�#��#����#�"��#�� "#��+�@���#"#��#����#��.���� �� �#��������"##���#��#����"�����"��#�. �71 :$ 9����+�� #�?�E��
Manufacturing and Distribution Planning
4–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4. Version of Supply/Demand Inclusion Rules
;��#�"�����"�����#"���#����+"�����"�����"����+���� �0�������"�� �"��� ��#�������������������� ����+"���#����"#�"������#��� ��#�"#���+�����"���
On-Hand Data Tab
���������"�����#"�����+"�������#����������� �� �#����C�����"����#���
1. Include Lot Expiration Dates
;��#�"�����"�����#"���#�����"+�����#���#����#������"��� �#��=�"�#"����#��������� �� �#"�����C�����"����#����1���=��� ���"+���������������C������"#������=�"�#"�����#���+�(���#� $�����4������������������������#��.��$�����4��#���������������#������"G��#����=�"��� �#��������#���������#������������+��#��������+�#���"#���#���#"+���������
A� "���� �����3
. ��* �����#����"��� �#��=�"�#"�����#��������� �� �#"�����C�����"����#��$ ���"��� �#��=�"�#"�����#��������� �� �#"�����C�����"����#��
2. Safety Stock Decrease
;��#�"�����"�����#"���#�����"+�����#���#��� ���.���������.��"��"�����" �. ��@���#"#��+�����"���#����+�#��#��*�@���#"#�����.�����.#��#���
A� "���� �����3
. ��* �����#�������$ ������
3. Receipt Routing Quantities
Quantity in Transit
-��������+��#�"������"�����#�����#"���"#�"��������#���#�. "������#��*�"��"������#����#��"������#�������#�"#�"����" �. ��+��"����"�#�������#��$�"+��������#�@���#"#"��"��#��"#�#��.��"�� �����"��#���6��"��"���(��" �. ��� �� �#"������#���#"����"����#���"���#���������"�� ����#����@���#"#"�"��#���-��)���"�#�7O-)9� "����+�#���#"����"�������@���#"#"�����#" ����"�������" �. ��.��#�"�������������"++������"��� ��"�����������"���#���@���#"#"�"��#���#"����"��
A� "���� �����3
. ��* �����#�"�� ����"����C�����"����#��
Generating Single-Level Master Schedules
4–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
$ "�� ����"����C�����"����#��
Quantity in Inspection
-��������+��#�"������"�����#�����#"���"#�"��������#���#�. "������#��*�"��"������#����#��"������#�������#�"#�"����" �. ��+��"����"�#�������#��$�"+��������#�@���#"#"��"��"����#"���#��.��"�� �����"��#���6��"��"��(��" �. ���� �� �#"�����#���"���#���������"�� ����#����@���#"#"��"��#���-�)���"�#�7O-)9� "����+�#���#"����"�������@���#"#"�����#" ����"��������" �. �.��#�"���������������������"++������"��� ��"�����������"���#���@���#"#"�"��#���#"����"��
A� "���� �����3
. ��* �����#�"�� ����"����C�����"����#��$ "�� ����"����C�����"����#��
User Defined Quantity 1
-��������+��#�"������"�����#�����#"���"#�"��������#���#�. "������#��*�"��"������#����#��"������#�������#�"#�"����" �. ��+��"����"�#�������#��$�"+��������#�#���������+"����@���#"#"��7��+"�������)���"�#�)��#"��)��""���"��#���;���#������#"���$�+"� �9�#��.��"�� �����"��#���6��"��"��(��" �. ���� �� �#"�����#���"���#���������"�� ����#����@���#"#"��"��#���-�)���"�#�7O-)9� "����+�#���#"����"�������@���#"#"�����#" ����"��������" �. �.��#�"���������������������"++������"��� ��"�����������"���#���@���#"#"�"��#���#"����"��
A� "���� �����3
. ��* �����#�"�� ����"����C�����"����#��$ "�� ����"����C�����"����#��
User Defined Quantity 2
-��������+��#�"������"�����#�����#"���"#�"��������#���#�. "������#��*�"��"������#����#��"������#�������#�"#�"����" �. ��+��"����"�#�������#��$�"+��������#�#���������+"����@���#"#"��7��+"�������)���"�#�)��#"��)��""���"��#���;���#������#"�����+"� �9�#��.��"�� �����"��#���6��"��"��(��" �. ���� �� �#"�����#���"���#���������"�� ����#����@���#"#"��"��#���-�)���"�#�7O-)9� "����+�#���#"����"�������@���#"#"�����#" ����"��������" �. �.��#�"���������������������"++������"��� ��"�����������"���#���@���#"#"�"��#���#"����"��
A� "���� �����3
. ��* �����#�"�� ����"����C�����"����#��$ "�� ����"����C�����"����#��
Manufacturing and Distribution Planning
4–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4. Lot Hold Codes (up to 5)
;��#�"�����"�����#"���#�����"+��#��� �#�#��.��"�� �����"��#����� �� �#"����+��C�����"����#����>���������#������="�����+�4� �#��� �������7:$0<9�
. ��* "�� ��������� �� �#�"���� �� �#"����+���C�����"����#��P "�� ����� ��� �� �#�"���� �� �#"����+���C�����"����#��
Forecasting Tab
���������"�����#"�������#��������3
� �����#��"������#�+����#�#����#���������������������
� ���"�"#"�#�����"� � ��"��+��+����#�������#"��
1. Forecast Types Used (up to 5)
1����#������������+���������>����������#��+����#��"���$���"++���#+����#�#����7 :0�19��"#�"��#���1����#"����#��������"����"�����#���6�#1"#�7619�#������������#�����"#��H��"#����+���������;��#�"�����"����#"���#����+"�����"���+����#�@���#"#"�����#���.����"���+����#�#������"�� �����"��#���� ���"�����������#���� #"� ���� ����"#�����������+��=��� �3��$��61�
2. MPS Forecast Type for Planning Bills
�����������������#"���#������7+��� ���"���." 9��+����#�+��#�������#�"�=� ����������#�����#��+����#�+��#�����������#��;��#�"�����"����#"���#�����"+��#���+����#�#����7 :0�19��������#�#�����#��+��#����������#��>�����#�� ����#��#�"�+����#�#����"��#���1����#������;������"�����#"���
3. Forecast Consumption Logic
-+��������+����#�������#"��������� ����������"��#���������"�����#��+����#�"�"�� ���������#��+�#���+����#�+��#��#���"����-#�"���#�������"#"��� ������+��������
������+����#�������#"�������"#��H�2 ���"���1�����)� ����#�.��F�����#��2 ���"���1�������#�.��%%%��������� �������#����#���2 ��#�5���+��#�"����#��+���
A� "���� �����3
. ��* �����#����+����#�������#"��$ ���+����#�������#"��
Generating Single-Level Master Schedules
4–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Document Types Tab
���������"�����#"����#�. "����+�� #��������#�#����
1. Purchase Orders
������������"���������� �#���#����������������#"����#�"��������##�����" ���������#�����+�� #��������+�� #��� ���"��2�
2. Work Orders
������������"���������� �#���#����*��������#"����#�"��������#�#����" ���������#�����+�� #��������+�� #��� ���"����
3. Rate Schedules
������������"���������� �#���#���#������� �����#"����#�"��������##�����" ���������#�����+�� #����#��#���;�����0����+�#����������#�#����+�#����#������� ��#��#��������#�#�����
Leadtimes Tab
;���+�#�� ���#"���#��� ����=#��#"���+���� ���"�����"�#��������#"����;�����������#��+" #����#������#���������
1. Purchased Item Safety Leadtime
1��"#����"#��#��*"���#����2��#�������������#����� ���������#������#��#��"#��H� ��� � ���#"���#���� �� �#��#���#�#� � ���#"���
2. Manufactured Item Safety Leadtime
1��"#����"#��#��*"���#����5��#�������������#����� ���������#������#�#���"#��H� ��� � ���#"���#���� �� �#��#���#�#� � ���#"���
3. Expedite Damper Days
�=���"#�������������������#�#"������#��������#"���#�#���#��������#"��"���+��#������.���+�����������#������
4. Defer Damper Days
��+�������������������#�#"������#��������#"���#�#���#��������#"��"���+��#������.���+�����������#������
Manufacturing and Distribution Planning
4–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Performance Tab
���������"�����#"�����+"�����#��#������"�������������������"��#"���
1. Clear F3411/F3412/F3413 Tables
;��#�"�����"�����#"����"#���=#�������#"��I�-+�������#��$�������"��#��52�05)20�)2�5�����#�. ��71 :$$9��52�05)20�)2�<����<��� �)�@�"����#72���"��9�#�. ��71 :$�9������52�05)20�)2��������7�"�����"�9�71 :$ 9#�. �����������
(����#��#�"���������� ��.�� "�"#����-+��� #"� ��������#�"�������������# ���"#��#�"�����"�����#"����#�#��$��������� ��*������ #���������#����� �#������"���
A� "���� �����3
. ��* �����#�� ���#�. �$ � ���#�. �
2. Initialize MPS/MRP Print Code
-+�������#��$�"��#�"�����"�����#"����#���������"�"#"� "G������������"�#���-#���6�����#�. ��71:$��9�.���##"���#���-#����"� ��������75)2�9�#�. ��*�
-+����� �����#�"�+"� ��. ��*������"���#"���"���������.�#�#���5)2��+"� ��+��� ��#���"#���"��#�����#��� ��#"����������#���������#����" ���#�� ���#�������"��#���-#���6�����#�. ��71:$��9������� ������#��#����"#���"��#����#��� ��#"����#��"#����$�������
)���� ���+����������#�#�"�����"�����#"����+�������"#���"��#�����#�� ��#"���#���5)2��+"� ��"�����#�����+� ��3
� $�"+�������������#����#��
� ��"+��������������#��
����2"�#�5�#��2����#"��������� ��������7) :4�9�� �������#����#����#�� ��#"���.�������#���5)2��+"� ��
A� "���� �����3
. ��* �����#�"�"#"� "G��#���-#���6�����+" ��$ -�"#"� "G��#���-#���6�����+" ��
Generating Single-Level Master Schedules
4–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3. Messages and Time Series for Phantom Items
;��#�"�����"�����#"���#�����"+�����#���#��������������#�����������#"����"��+������#���"#���
A� "���� �����3
. ��* �����#������#�$ �����#�
4. Ending Work Order Status
;��#�"�����"�����#"���#�����"+��#�����*�����#�#���#���"�������������� ������=� �����#����������#��-+����� �����#�"�+"� ��. ��*��� ����������=� �����#����������#�
5. Extend Rate Based Adjustments
;��#�"�����"�����#"���#�����"+�����#�����/�#���#�+���#��.����"#������=� �����#����������#��#���.�����#"���������+��#�����������#�
Manufacturing and Distribution Planning
4–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
A� "���� �����3
. ��* �����#��=#���$ �=#���
6. Closed Rate Status
��#��#���#�#���+�� �����#��������� ���"���+�����#��.����"#����#��������������#����"����#�������#�#�"�#�#�����"����
Process Mfg Tab
-+�����������������+��#�"������#��$�#�������#��#���� ���.�������#��+����#��+�#�����C0.�C�����#�+��#�������������������#�������#�������+��#��������
1. Process Planning
-+�����������������+��#�"������#��$�#�������#��#���� ���.�������#��+����#��+�#�����C0.�C�����#�+��#�������������������#�������#�������+��#��������
A� "���� �����3
. ��* �"��#�$ ����
Parallel Tab
���������"�����#"������"+��#������.���+�������#��#�#����#�������"������ � �����"�����������#"���� �����"+�����#���#����#�����������"�����"������ � �����"���
1. Number of Processors
;��#�"�����"�����#"���#�����"+��#����+����.���.�#���"��������������+�� #�"���7G��9�
2. Pre processing
;��#�"�����"�����#"���#�����"+�����#���#����#������������"����"������ � �����"������"���������"����#����#�������*���� ����������������� ����� ��#���"#����"#�"����� ��������������2�����"��"��������+�������������������5)2�����"��� "���� �������#������.���+"#�����#�� ��� ������"� ��#����#���#�#� ����.���+�"#���"��#�����#�� ��#"����A� "���� �����3
Generating Single-Level Master Schedules
4–23OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6 ��* �����#���������#����������"���$ �����#������������"���
Reviewing Items for Net Change
;��#���D�#��������)��"���������#����"���"#���#��#����������������"#��#��������#�"��� ����������� ��������#"�"#"��#�������#�#���5���+��#�"�������"#".�#"���2 ���"����#����>������� ���#����� ��#���������+�"#���.�� ��������.���� ���"���+��" ���.����0� ��#���������"+"��� ���"���������>������������ �#���#"����"���"����#������������� "���"�+���#"���+���+������+�#���"#����
-+����"#���������������"#����������#���D�#��������)��"���+����"#����>�"�#���D�#��������+"� �������+� ��"��� "#�"���#"+"��#���������#��#���#���#"�� �
��#"��#��#�����#��������+ ��3
�����9���*�%������ (������"#"���������������� �#"�����#"��#��#���+ ���+��#��#
"#����-+���.������������+�����"#����#����#�������#�
.�#��� ���������� ���#"���
�����9�������������� (���� ��#"�����#"��#��#���+ ���+��.�#��#���� ��#���"#��
����#���"#���.�"����.#"#�#���
"�� -����/���� (������"#"������� �#"�����#"��#��#���+ ���+��#���"#����-+
��������������@��#���#��+�����"#�����@���#"#���#��
�#�����#"��#��#���+ ���+��#���"#����-+����"#���#�#�
�������#��%%������#���@���#"#��������"���#��@�� �#��#��
@���#"#������ �#����#����#�����#"��#��#���+ ���+��#��#
"#����-+���.������������+�����"#����#����#�������#�
.�#��� ���������� ���#"���
"�� -������%������
������
�� �����"�����#"��#��#���+ ���
"�� -������%������
����������
-+����"#���#�#���������#��%%������#���@���#"#�������
������#��@�� �#���@���#"#������ �#����#����#��
��#"��#��#���+ ���+��#��#�"#���
��%��������C�������� �����#�����#"��#��#���+ ���+������"#��������"����#��
���.������/�#���
��%������ �������� �����"����#���"�#��+����+�������.�����#�����#���
#����#�����#"��#��#���+ ���+��#����++��#���"#���"��.�#�
���#"���
Manufacturing and Distribution Planning
4–24 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
.�����,��������,����� (������"#"������� �#"����+�����������#�"#�����#"��#�
#���+ ���+��#�������#��+�#�������������������#��-+�#��
"#����@���#"#��������������++��#"�"#����#���������+�
������������#�"#����#����#�����#"��#��#���+ ���+��#��
����#��+�#��#���������#�
,������"����7���
7����
(����������#������������#�"#�����#"��#��#���+ ���+��#��
����#��+�#�������������������#�
$�����,������*�%��' -+�����#�*����#"�����������������������#���@���#"#��
#�#���#������@��#���#����������#����#�����#"��#�
#���+ ���+��#���"#����-+�����#�*����#"����������=���"#���
��+������������#��������������#�#���#���
������������@��#���#����������#����#�����#"��#�
#���+ ���+��#���"#���
��������*�%������ (������"#"���������������� �#"�����#"��#��#���+ ���+��#��
"#���
,������������$���
*�%������
(������"#"���������������� �#"�����#"��#��#���+ ���+��#��
"#���
*����-��D��������� (����#������ �#�������"##���@���#"#���+����
��������#�"����#��������*�����#��#��������#�#�
�@�� �#��#���#�#��"��"��#���"��#�������"�����#"��
7��� ��#�#��%%9���������#���#"��#��#���+ ���+�����
����� ���"����#���
9�������*���� ��"�������������������"#"�� �����+��#�"�����#��"�
#���-#���6�����#�. ��71:$��9��-+����������#���+ ���"
����#���+�����"#���
�����-����/���� (������"#"���������������� �#"�����#"��#��#���+ ���+��#��
"#���
��������-����/���� (������"#"���������������� �#"�����#"��#��#���+ ���+��#��
"#���
E��������*�%��' (�������� �����#��#��#���D�#��������+"� ����#"��#��#��
+ ���+��#���"#���
Generating Single-Level Master Schedules
4–25OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
(��"#"��� �������#����#"���#��#���������������"����� �������������"��#�����=#�5)2��������#��#�����#��������+ ���"��#���-#���6�����#�. ��71:$��9��=��� ��"�� ���3
� >��������#�*�����#"�������������������������"#���#���@���#"#���#�#��#������@��#�����#���������
� >��������#�*�����#"����������=���"#������+�������������#�������������#�#���#����������������@��#�����#��������
� >�������� ��������
E���F�>�����������#��#�����#��������+ ���+���#���D�#��������)��"�����������#�#������"#�������#��#��#��� �������"�#�������� ��������#�����#������ "�������"�������������
���%��'�����������������
1���#���2�"��"���"�� ���"#��2 ���"��������78 :��9��������D�#�������)��"���
�����*��"#��D�#�������������������� �#��#���+� ��"���+"� ������ "�*�1"���#�� ���#��#���"#���#��#��" �.��"�� �����"��#�����=#���#������������#"��3
� 6����02 ��#
� 5�#��2 ���"���1��" �
Manufacturing and Distribution Planning
4–26 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Net Change Review
Defaults
Enter Planning Code or a blank for All
1. Planning Code ____________
Generating a Master Schedule for Selected Items
1���#���2�"��"���"�� ���"#��2 ���"��������78 :��9���������)2���52��D�#�������
�)2�����52����#�����������#�������.�#�����������#����)2�����52�������#"����;��������"�����#"���#�����"+����#���������>�������+�#����+"���#�����#��� ��#"���#��"�� ������ �����"+"��"#���#��#����������#���D�#�������)��"���+�����������������)2�D�#����������52��D�#���������#���#��3
� ��� ��#��� ��#���"�+���#"��
� 2�+����� �� �#"��
� 8����#����#"����"������������+��#���� ��#���"#��
�����#���� ��#�"#���+���D�#��������)��"���.�������#���+� ��"���#����+���#"�"#"�3
� 6" ��+���#�"� �������
� -����#���#����#"��
� 1����#���/�#���#
� ��*�����������
� 2����������������
� <���#"���� ���#��#��� #�"������ ���#"����� ��
� �� ������������
� �������"������#������@�"����#
>������ �����D�#���������������� ��.�"�#�����#"��� ������#���������� ��������������"#��#��#���(�#"���5������2���"���������"�����"�#�. ���>��������"���#���"�+���#"���#��#�"������#���.��#�"��������� "���.��"���#���#"����"��������������"���������
See Also
� ����������������'���������������� �+��#�������"�����#"���+�#�"������
4–27OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing the Time Series
;��#����)2���52��#"����"��"�@�"��������#����"���#�����#������� ��������"������#���#�������#�#���� ���"���#��#�#����#�������#���#����"���"#��������#���"� �����"���"����+���#�����#�����#������#"�������#�����������>������ ����"���#�����#"���������+��"��"�"��� �"#������.�#����#��"�����"�����#"����"+������#��#�*���;������"�����#"���"��#���)2052�������#"���������#���#������" ������* ��������#� ��#"�����"��7.��*�#9��
�����"���#���#"����"������� �#�������+�#���+� ��"���#�*3
� )��"����)2�#"����"�
� )��"���52��#"����"�
����+� ��"��� "#����".�������+�#�����#"���#�"�+���#"������.�#��#����)2��52��#"����"�3
D�������������������
����������
>���������"���#���+� ��"��3
� �"��C������"����#�����#"�"#��"��������"#��+������� (��" �. ��#�����"��@���#"#"��"�������� "����"#��+
������ �"���+���������#��� ���#"����#�#���"#��� ��� � ���� �#"�����������+��#�"��� ���#"�����������
��C�����������C�����
�����+���������
2�"���@���#"#"������"#�����/�#���������/�#���
������ �� �#"���+����/�#���@���#"#"�������#��#�#��
����" ������#���������
������ �� �#"���+������/�#���@���#"#"�������#��#�#��
����" ���#������#�����#"��������������;��#�#��
�����+���@���#"#��#����"��"��#��#��#���"���@���#"#"����
����/�#���
)�+��#��#��� "#��+�@���#"#��#����+� ��"���#�"�#�. ��+���
��+"�"#"����+��������"���@���#"#��#����
Manufacturing and Distribution Planning
4–28 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
������������������ ��������������� ���"���#"���+������ ��#��#��� �� �#�
#������"������" �. ��#��#�"�.�������#������#���+
+����#�����#������������������� ��8�������F��#��
+����#�"����������K�������L������#��#�#���+����#
"��������.��#��������#��+�#�����#�����������"��#��
������"����
?������������������� >��������"� ���#���#"����"��"���"++���#�+���#����
��#���+� ��"��3
� �����"G��� �������� "���"�#������������� "��� �����"G��� ���� �� "���"�#��������� �� "��� ����������+�"�+���#"���#��� ��#�������� ���� ��.�#�����#����"++���#�@���#"#��#�������#���
"��#�������"�����#"��
�������������
�������
>�������������#�����������" ����"��"���#���#"��
�"�3
� ���� �0�������-�@�"������2���"���-�@�"��#���#��"���������"���� ��� �����������.�"�������#��
� 5�����1" ��)��""���#����"�����������#�" ����#�*�����������"�#����#"��
� 5���+��#�"�����#��)��""���#����"+��"#����#����#�"
� ��#�" �1����#�)��""���#����"���"#���+����#����� ���"#��
� )�#�������� ��)��""���#����"���"#����#������� �� 52�����)2������#"���#���������� "���������#"��
+��#����"� �����"#��
DRP Quantity Types
����+� ��"���#�. �� "#�#����� "��@���#"#��#�����������"�#"���+���)2�"������+"���������#�. �� :0�)3
@.� O�6��"��"���(��" �. �
@�* O�-��)���"�#�)��#"��
@�- O�2���������
G9/H� '��<�#��=�"��
G��� '�52�01����#
G���� '���"�����E���#"#�
G�- '��� �����
G�$ '�-�#�� ��#�������
>/� ?����"���(��" �. �
@$*� O��"#".�#"���)�@�"����#�2 ��
� � (��" �. ��#��2��"�
�� � ���� �#"���(��" �. ��#��2��"�
Reviewing the Time Series
4–29OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
(+#���������#���52�������#"����(�2�����(�2;�#��#������������#"����� ��������. ��*����#����"�����"�0(�2�-�@�"��+�����=���#�+��#���+"#���"����-+(�2;�"�����#"���"�"���#���� ���"���#"���+������#����#����#����"� ���#���� #"����(�2;�����#���"#�"���"#"���������#"����"��� ����"���#"�����"���������(�2;�"��@�� �#�������"���#�#� ��+�(�2;��#����� �� �#"��������#��##�����������#���#������#����������
MPS Quantity Types
����+� ��"���#�. �� "#�#����� "��@���#"#��#�����������"�#"���#��#�����+"����+��52��"�������+"���������#�. �� :05�3
@.�7 O�6��"��"���(��" �. ��7;���/�#��9
@.� O�6��"��"���(��" �. �
@�* O�-��)���"�#�)��#"��
@�-7 O�2����������7;���/�#��9
@�- O�2���������
@"-7 O���*�����7;���/�#��9
@"- O���*����
@*�7 O�)�#�������� ��7;���/�#��9
@*� O�)�#�������� �
G9/H� '��<�#��=�"��
G���7 '�52�01����#�7;���/�#��9
G��� '�52�01����#
G���� '���"�����E���#"#�
G�-7 '��� ������7;���/�#��9
����������#����#���#"����"��"�@�"��������������#�������������+"��������#�. ��+��#���@���#"#��#���������������#��������"�#������"�����#"��#���"� ���#�"�����#�. ���>�������� ���������"�����#"���#���"� ���#���"++���#�#�. �����������/�#�����������/�#���@���#"#"��
�����#�. ���"� ����� ��"#���#��#������#"���#�#��"#���� "��#"����1���=��� �������+"���������#�. �� :0�)��"� ����� ����#��"#���#��#���� ��#���)2�"#���-+�#��������"���#���+"����"�������+"���������#�. �� :0�)��"#�������#���������#����)2��"�����"�0(�2�-�@�"��+��������#���)2�����52���� �� �#"�������#��++��#���.��#��������������+�#�"������
-+����������#����"+������#"�� �������+"��������� "#��� �@���#"#��#����"� ����F�������#���#"����"���� �� �#"���"���#��++��#���.��#���@���#"#��#���#��#������#���#"���#�#��#������ "��#"���
See Also
� !��"���#���&�� �'(������+��"�#��#"�����������"���#��#��������+���#���#"����"��"�@�"��+��
Manufacturing and Distribution Planning
4–30 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%��'$*�����������
1���#�����" ���)2�����#"��������78 :$$9���������)2��"�����"�0(�2-�@�"��
$� �����*��"#���"�����"������� �#��#���+� ��"���+"� ������� "�*�1"��3
� 6����02 ��#
� -#���D��.�
�� ����������#����"� ���������������+�#���+� ��"�����#"�������� "�*�1"��3
� ������6 ��*�<"��
� �����"G������ ��������
� ( #���#��E���#"#������
� �����������"#"��� �+����������+���#���1��������
Reviewing the Time Series
4–31OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%��',������������
1���#�����" ��52������#"��������78 :$�9��������52���"�����"�0(�2-�@�"��
$� �����*��"#���"�����"������� �#��#���+� ��"���+"� ������� "�*�1"��3
� 6����02 ��#
� -#���D��.�
�� ����������#����"� ���������������+�#���+� ��"�����#"�������� "�*�1"��3
� ������6 ��*�<"��
� �����"G������ ��������
� ( #���#��E���#"#������
� �����������"#"��� �+����������+���#���1��������
Manufacturing and Distribution Planning
4–32 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for DRP/MPS Time Series (P3413)
Defaults Tab
���������"�����#"���� �������#�����"+��#����@�"�������� #���#��;��#����+��#���#"����"��������"�#"���"��#����"�����"��������72 :$ 9�
1. UDC Type (Required)
;��#�"�����"�����#"���#�����"+��#���;��������"���#��� :�+��#��� "#��+������"�#"���#��#����������#���#"����"���-+����� �����#�"���#"���. ��*�#����#������#���@���#"#��#���������7E�9�
2. Alternate UDC Type (Optional)
;��#�"�����"�����#"���#�����"+��#���;��������"���#��� :�+��#��� "#��+� #���#��������"�#"���#��#����������+������"�#����"#��#����"�����"�������72 :$ 9��������#���( #���#��E���#"#���������#"���#���"� ���#��� #���#��������"�#"����-+����������#�����*������#"����#����#���������#�"� ���#���� #���#��������"�#"���
Process Tab
���������"�����#"���"���#"+�����#���������#���"�+���#"����" ��"� �����#����"�����"��+����>����������������"+"����#���������+����#������#"�����"����(��"#"��� �����������������#������"G����� ��������������#��"�#����"�� �����
1. Past Due Periods
;��#�"�����"�����#"���#�����"+��#������.���+���"���#��#�#����#���"� ����"��#��#���5)2������#"���#�#���#�����#���#"����"���A� "���� ����3
� ����"���7��+�� #9��"��#��#���5)2������#"���#�#���#�$ ������"����"��#��#���5)2������#"���#�#���#�� #�����"����"��#��#���5)2������#"���#�#���#�
��"��� ������ �����������"#��#���5)2�8����#"���7) :��0) :� 9���#������"����-+�#���5)2�8����#"������������������#�������"����#�"���#"����� ��.���#�#������
2. Summarize Supply and Demand
;��#�"�����"�����#"���#������"G����� �� "���"�#����"�� ��������������� "���"�#�����#���"�� ��������+������"�#����"#��#����"�����"�������72 :$ 9��A� "���� �����3
Reviewing the Time Series
4–33OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6 ��* �����#���������#�����"G����� ������������� "���"�#��"�� ����
$ �����#�������"G����� ������������� "���"�#��"�� �����
3. Forecast Consumption Periods
;��#�"�����"�����#"���#�����"+�����#���#����#���"��"��#��#���+����#������#"�����"���"��#����"�����"��������72 :$ 9������5)2���+����#�������#"����A� "���� �����3
6 ��* �����#���������#�"��"��#��#���+����#�������#"�����"���$ �����#���"��"��#��#���+����#�������#"�����"���.��� ��"�����
�#�"*���=#�#��#�����#��
Versions Tab
���������"�����#"���� �������#�����"+����"����+����#�����������������"�� ��-#���5)2�7) :��9�����5)2���#�" �5�����)��"���72 :$$9�#��#���������#�������������+����="#�+���#����"�����"��������72 :$ 9�
1. Single Item MRP (R3482)
;��#�"�����"�����#"���#�����"+��#�����"����+�#����"�� ��-#���5)2������7) :��9�#��#�#����#��������������������"#�+���#���+����="#���#�����*��"#���"�����"��+����-+����� �����#�"���#"���. ��*��#����#�����#���U������$���"���
2. MRP Detail Message Review (P3411)
;��#�"�����"�����#"���#�����"+��#�����"����+�#���5)2���#�" �5����)��"���������72 :$$9�#��#�#����#��������������������"#�+���#������="#����#�����*��"#���"�����"��+����-+����� �����#�"���#"���. ��*��#���#������#���U������$���"���
3. Supply and Demand Inquiry (P4021)
;��#�"�����"�����#"���#�����"+��#�����"����+�#������� ������������-�@�"��������72:��$9�#��#�#����#��������������������"#�+���#���+���="#����#�����*��"#���"�����"��+����-+����� �����#�"���#"���. ��*��#���#������#���U������$���"���
4. Forecast Revisions (P3460)
;��#�"�����"�����#"���#�����"+��#�����"����+�#���1����#�)��""��������72 :&�9�#��#�#����#��������������������"#�+���#���+����="#���#�����*��"#���"�����"��+����-+����� �����#�"���#"���. ��*��#����#�����#���U������$���"���
Manufacturing and Distribution Planning
4–34 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5. Pegging Inquiry (P3412)
;��#�"�����"�����#"���#�����"+��#�����"����+�#���2���"���-�@�"�������72 :$�9�#��#�#����#��������������������"#�+���#���+����="#����#�����*�"#���"�����"��+����-+����� �����#�"���#"���. ��*��#����#������#��U������$���"���
6. Rate Schedule Revisions (P3109)
;��#�"�����"�����#"���#�����"+��#�����"����+�#���)�#�������� ��)��""��������72 $�%9�#��#�#����#��������������������"#�+���#���+����="#���#�����*��"#���"�����"��+����-+����� �����#�"���#"���. ��*��#����#�����#���U������$���"���
7. Work Day Calendar (P00071)
;��#�"�����"�����#"���#�����"+��#�����"����+�#�����*������� ����������72���!$9�#��#�#����#��������������������"#�+���#���+����="#���#�����*��"#���"�����"��+����-+����� �����#�"���#"���. ��*��#����#�����#���U������$���"���
8. Item Branch (P41026B)
;��#�"�����"�����#"���#�����"+��#�����"����+�#���-#���6����������72:$��&9�#��#�#����#��������������������"#�+���#���+����="#����#����*��"#���"�����"��+����-+����� �����#�"���#"���. ��*��#����#������#��U������$���"���
4–35OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Working with DRP/MPS Output
(+#�����������#���)2052����#��#��#����#������#����#"���������#��#3�
� ( �#�#�����#������� ���+���". ������������"#"��
� �"� �����#"������������#"���#��#�#�����#������� ����������
�����#����"� ���������.��#�����>�������"���#"+����"���"#����@�"��##��#"���.�������#���+� ��"���������#���3
� ���"���5����
. ���������=���"#�
� �����
$ ��+�
/ �=���"#�
� 1�G��
! -����������E���#"#����
� �������)�#��E���#"#����
� -������)�#��E���#"#����
9 �����������E���#"#����
, 5���� �)��"���
E ���#��)�#�
- ���
� 1"�����
� 12��(�/�#���#������#"��
2�#��������
Manufacturing and Distribution Planning
4–36 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
��*"����"#���)2052����#��#����"#��+�#���+� ��"���#�*3
� ��*"����"#�������
� (��"�����+��G�������#��������������
� (��"�����+��G�������#������*����
See Also
� �������1�-��������������+������"�+���#"���������#������������#����#���������������
Working with Messages
>������������ ����"�������������������"���#�����#�" �5����)��"�������������#���#"�� �������#����������"���#�����#�" �5����2���"���������
��*"����"#�����������"#��+�#���+� ��"���#�*3
� )��"��"�����#�" ������
� 2���"�����*����������
� 2���"�������������������
� 2���"���������+����� ���"���+��" �
� 2���"�����������#���#"�� �
� 2 ��"�������������� �
� � ��"��������
;��#�������"�����#"���+���)2052�05)2�#�����"+��#�����+�� #��� ���+�#�������#����#��#������������#�" �5�����)��"���
������#"���������+���)2052�05)2������+"����"�������+"���������#�. � :05������������#��������������������������#��������#��������#������"��#�"� "#�
�������3�������"������#�������"G�#"����+��������������#����������*"���"#��#����)2052�05)2���#"������������ ������"��#���"#�������1 ����2����"��������� �.�+���#�*"�����#"�������������++��#"�������#���#�
Working with DRP/MPS Output
4–37OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing Detail Messages
(+#�����������#���)2052���������"���#�����#"���������+��#���"��"�"��� "#������.���(+#��������"�������������������������+��������+�#��+� ��"��3�
� 2 ����#�������������� �
� � ���#��������
� �� �#��#��������
>��������� �#������������#��#������������"�����.�#��"����#������
� 2����#��������
���%��'��������������
1����)2���" ������#"���78 :$$9���������)2���#�" �5�����)��"���
$� �����*��"#����#�" �5���������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���������+��#���"#��3
� -#���D��.�
� �������6����
�� )��"���#���+� ��"���+"� �3
� 5�����
� 5����
Manufacturing and Distribution Planning
4–38 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ����D��.�
� ����
Processing Options for DRP/MPS Detail Message Revisions
PO Info Tab
;��#��������"�����#"���#����+"��������������"�+���#"���
1. Line Type
;��#�"�����"�����#"���#�����"+������#����#��������� "�������#����#"�������� "���#�����++��#�#����#����"#����"���#���#����#"��"�#�+����78���� �<��������.���#��(�����#�2���. ���(�����#�)���"��. ������-����#���5��������#9������ "���#����� �����"+"��#�������"#"���+�"�� ��"����� "���������#�����"���� �� �#"����������=��� ���+��� "���� �����"��������.������+"�������#���<"�����������#��#�)��""���+���72:���49���3
� �#��*�"#��� ��.���#���.���#��#���������"���#��#���8���� �<����6 80<�������#�����"#������.�D D��C#��*�"#��1 1�"��#� ��=#�"�+���#"��5 5"�� �������������������"#� ��*����
2. Beginning Status
;��#�"�����"�����#"���#��"��"��#��#���.��"��"���#�#�����"���"�#���+"#�#��"��#�������������>�����#����"+���������+"���������7:�0(�9�#��#���.�����#�������#�������(�#"�"#��)� ��+���+��#�������#��������#��� "���#���#��#���������"���
3. Consolidate
;��#�"�����"�����#"���#��"��"��#�����#����������#�#������ "��#��� �������������#��#���� ��#��������� "��������������������
Working with DRP/MPS Output
4–39OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
A� "���� �����3
$ ���� "��#��������6 ��* �����#����� "��#��������
WO Info Tab
;��#��������"�����#"���#����+"�����*�����"�+���#"���
1. Beginning Status
;��#�"�����"�����#"���#�����"+��#��������+"���������7��0��9�#��#�"���#"+"�#�����+�� #�#�#���+�#�����*�����#��������������*�����"����#���
2. Canceled Orders Status
;��#�"�����"�����#"���#��"���#"+��#�����+�� #������+"����#�#������7��0��9�+��������� �����*�����
OT Info Tab
;��#�"�����"�����#"���#����+"���#��+������"�+���#"���
1. Consolidate
;��#�"�����"�����#"���#��"��"��#�����#����������#�#������ "��#��� �������������#��#���� ��#������.����0� ��#��������#��+������
A� "���� �����3
$ ���� "��#��������6 ��* �����#����� "��#��������
Blanket Info Tab
;��#�"�����"�����#"���#����+"���. ��*�#�����"�+���#"���
1. Blanket Order Document Type to Release
;��#�"�����"�����#"���#��"��"��#�����#����������#�#���������#����+�����"�#���#"���� �������"�#�����#��"���. ��*�#��������������"��������#�����#�������������
� ��#�����������#�#����#��� �������"�#�
� -+����� �����#�"�+"� ��. ��*��#���������������#�� �������"�#��. ��*�#�����
Manufacturing and Distribution Planning
4–40 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Versions Tab
;��#��������"�����#"���#����+"������#���"���#����������#�"���������������#���������
1. Blanket Order Release (P43060)
;��#�"�����"�����#"���#�����"+������"����+�#���6 ��*�#�����)� ���������������#����� �#�"���"�����������������6 ��*�#�����)� ���+���#�"�������
�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�
2. Time Series (P3413)
;��#�"�����"�����#"���#�����"+������"����+�#����"�����"�������������#����� �#�"���"�������������������*��"#���"�����"��+���#���1��������+���*��"#����#�" �5���������#�" �5�����)��""���
�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�
3. Pegging Inquiry (P3412)
;��#�"�����"�����#"���#�����"+������"����+�#���2���"���-�@�"�������������#����� �#�"���"�������������������*��"#��2���"���-�@�"��+��#���1���������+���*��"#����#�" �5���������#�" �5�����)��""���
�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�
4. Supply/Demand Inquiry (P4021)
;��#�"�����"�����#"���#�����"+������"����+�#������� ������������-�@�"��������������#����� �#�"���"�������������������*��"#����� �������������+���#���1���������+���*��"#����#�" �5��������#�" �5�����)��""���
�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�
5. Purchase Order Entry (P4310)
;��#�"�����"�����#"���#�����"+������"����+�#���2���������������������#����� �#�"���"�������������������*��"#��������#�" �+���#��)���������+���*��"#����#�" �5���������#�" �5�����)��""���
Working with DRP/MPS Output
4–41OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�
6. Work Order Entry (P48013)
;��#�"�����"�����#"���#�����"+������"����+�#�����*�����2���"��������������#����� �#�"���"�������������������*�����2���"��+���#�"�������
�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�
7. Rate Schedule Revisions (P3109)
;��#�"�����"�����#"���#�����"+������"����+�#�����#�0�������)�#������� ��������������#����� �#�"���"�������������������*��"#�)�#�������� ��+���#���1���������+���*��"#����#�" �5���������#�" 5�����)��""���
�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�
8. Transfer Order Entry (P4210)
;��#�"�����"�����#"���#�����"+������"����+�#����� ��������#�������������#����� �#�"���"������������������� ��������#��+���#�"������
�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�
9. Scheduling Workbench (P31225)
;��#�"�����"�����#"���#�����"+������"����+�#���5���+��#�"��������� "����*.�����������������#����� �#�"���"�������������������*��"#���*����������� "���+���#���1���������+���*��"#����#�" �5��������#�" �5�����)��""���
�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�
10. Bill of Material Inquiry (P30200)
;��#�"�����"�����#"���#�����"+������"����+�#���6" ��+�5�#�"� �-�@�"�������������#����� �#�"���"�����������������6" ��+�5�#�"� �-�@�"�+���#���)���������+���*��"#����#�" �5���������#�" �5�����)��""���
Manufacturing and Distribution Planning
4–42 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�
11. Item Branch (P41026)
;��#�"�����"�����#"���#�����"+������"����+�#���-#���6����������������#����� �#�"���"�����������������2 ��#�5���+��#�"�����#��+���#��)���������+���*��"#����#�" �5���������#�" �5�����)��""���
�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�
Display Tab
;��#�"�����"�����#"���#�����"+�����#���#���"���������+��������.����0� ��#������ ��.����0� ��#�
1. Viewing Messages For
;��#�"�����"�����#"���#�����"+�����#���#���"���������+��������.����0� ��#������ ��.����0� ��#�
A� "���� �����3
$ A"���������+����� ��.����0� ��#�6 ��* A"���������+���������.����0� ��#�
Processing Work Order Messages
(+#��������"���#�����������������������#���������������������*�����������#����#������#����*�����������"��#�����*����5�#��#�. ��71:��$9������"�����*��������.���D����#� "#�����#"���##������#�#�"�#"����
>��������������*������������"���#���+� ��"�����#���3
� 2������"�� ����#"���������+�����"#��
� 2������ #"� ����#"���������+�����"#��
� 2�����������"������ ���"���+��" �
� 2������������#���#"�� �
�����#���+"#���������*������������������#������� �����"�+"����������#��������+���#���.��"��"�����#��#������#���������#��#��#�#���#���������#������*�����������������+"�������" ���#�.���#���#"�� ���� ������"���.�@���#�52�������#"����F�������"+�#���.�@���#�52�������#"���+"������"��#���.�#�����#������ ��@���#"#"���
Working with DRP/MPS Output
4–43OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
��#������#����������@���#"#"������#���#�������������������� "�����#�+�#����="#"�����*�����
������������+"=�������@���#"#��71�E9��52�0�)2�������#������#����-������������+������="#"�������#���������������-�#�����#����#�������#������������"���� #"� ���+�1�E����������#�������#����������
������������#��������#���������������������"+��#���#�#���+�#�������#�"��"��#��#���#�����+������#"���������������#��������#�#��"��#����#�#��+"� �������#����"� ���#�"�+"� ���� ��+��������#��#����� �#���#���������"���
�������'�� �������������
1���52����" ������#"���78 :$�9��������52����#�" �5�����)��"���
$� �����*��"#����#�" �5���������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���������+��#���"#��3
� �������6����
� -#���D��.�
�� ������#���������#��#��������#�#�������
� 1���#���)���������������2����5�����
:� ����"���#���������#��#�������������������2������5����+���#���A"��������
Processing Purchase Order Messages
>��������������������������������"���#���+� ��"�����#���3
� 2������"�� ����#"����������"#���#�. ��*�#���������*"�������� "��#"��
� 2����������������#"����������"#��. ��*�#���������*"��
� 2�����������"������������������ "��#"���#��"�� �������#��������"#������������������
� 2����������������������"������ ���"���+��" �
� 2�����������"���#������� "�������� "����#��
��������������������#��#������#�������"++���#���"����+���*��"#���#�" �5�����+��������+�#������"�����#�����������"++���#���"���=���"#������������"�������#�"���#����������"���#���������"�� ���#"����������"#���#�. ��*�#���������*"��������� "��#"�������#�����"��#�������������������#"����������"#��. ��*�#���������*"�������������
���� �#��#���+� ��"���#�*3
Manufacturing and Distribution Planning
4–44 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� 2������"�� ����#"��������
� 2�����������"������� "��#"��
� ����� �"#������������������
������"���������������#�#�������"�����#"���+��#����)2052�������#"���������#������������#���"#�������������@�""#"���7�������#�#�����)9���������������7�������#�#�����29������������"�� ���������-�����#��������������������#����#�����#����#�����#��#��#�#�������������������#���
-�����"#"����#������������#��#��������������"��#��������"�����"#��+������������#������#�����#"����������"� ���#����"������"#��+�������������������*��#��������"�#����"#��+������������"����(+#��#�����=#�)2052��������#"����#���@���#"#"��#��#�������"�#����"#��������������������"��#���#"����"���"� ������#���O2��@���#"#��#�������
���������������������#����#���+"��#��#���#"����+�#����)2052��� ��"����#�� ������.�@���#��)2052��������#"����" ���#��������#��#"�"�����@���#"#"�����"�#����"#�����"�� ����������������F�������"+#�������������#"���+"������"��#���.�#�����#������ ������������@���#"#"������#���#���������"�������������������"����� "�����#��+#����="#"���O2��
See Also
� ����������(�����
� ����������'�������'���������+��"�+���#"����.��#�����"���������"���#�"��#��
���������������������������
1���52����" ������#"���78 :$�9��������52����#�" �5�����)��"���
$� �����*��"#����#�" �5���������� �#��#���+� ��"���+"� ������� "�*1"��3
� �������6����
� -#���D��.�
�� ������#���������#��#��������#�#�����������#����������2���5����79�+���#���)��������
E���3�-+����"#���������#����������� "���"�����#��"#��#����#���"� ������������������#������� "�����.������� "�*��T�
� � "�*�� ���
Working with DRP/MPS Output
4–45OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
:� ������� "���� ��#���+�������������8����#�����79�+���#���1�������
4� ���8����#���2������������ "�*�� ���
&� ����"� ���#���������#��#�����������������*��"#����#�" �5�����������2������5�����+���#���A"��������������#����"������������������.�������"� ���"#�"��#�������D��.��+"� ��
Manufacturing and Distribution Planning
4–46 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���������������������������������
�����#������#������������������������"#�����������#�" � "���"#��������������#����������#��#����������-+�����#��������#���������� "������������������#������ "�����.��"��#�����������#�" ����������#�����������������������+���������� "���
1���#����)2���" ������#"��������78 :$$9���������)2���#�" �5����)��"���
$� )"��#�� "�*��)2���#�" �5�����)��"��������#����������2���#�+�A� ���
�� ��#�#��������"�#������"�����#"���#������ "��#��� �������+��#��������� "��"�#����������������������#����� "�*��T�������#���"� �����*��"#����#�" �5�����
� �����*��"#����#�" �5���������� �#��#���+� ��"���+"� ��#�� ���#��#��������+��#���"#�������� "�*�1"��3
� �������6����
� -#���D��.�
:� ������#���������#��#��������#�#�����������#����������2���5�����+���#���)��������
�����#����"�����������������.�������"� ���#����"��#������D��.��+"� ��+�������"#���
E���3�-+����"#���������#����������� "���"�����#��"#��#����#���"� ������������������#������� "�����.������� "�*��T�
4� ����"� ���#���������#��#�������������������2������5����+���#���A"��������
���������������������������
-+�"#���#��#����������#����#�#��"�� ������������������������������������ �#��#����+���#���������������
$� �����*��"#����#�" �5������������#���"#���#��#��������#�#���� �#�+���#��������������
�� � "�*��� �#��
Working with DRP/MPS Output
4–47OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Messages for a Planning Family
>������������������+����� ���"���+��" ��.���"����)2�2 ���"���1��" �)��"���
��������������������������������
1���#����)2���" ������#"��������78 :$$9���������)2�2 ���"���1��" �)��"���
$� �����*��"#��5����������������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#����� ���"���+��" �3
� 6����0�2 ��#
� 2 ���"���1��" �
�� ������#���"#���������������������#�#�����������������5�����+���#���)��������
�)2���#�" �5�����)��"���������+�������"#���#��#�����������2���#���������+�������"#���#�����������#��#�����������������"������ "��#"���
Manufacturing and Distribution Planning
4–48 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Messages Automatically
1���#����)2���" ������#"��������78 :$$9���������)2���#�" �5����2���"���
(����� #���#"���#������"���������"�#���#"�� ����������������#�" 5�����2���"��������������������#���+� ��"���#�����+�������+���*����������������������#��+�����3
. ���������=���"#�
� �����
$ ��+�
/ �=���"#�
! -����������E���#"#����
9 �����������E���#"#����
- ���
����������������#�������������#��>���������"������������"��#����� �������*����#��"��#�����.�"##�����.�E������>��������"������������#��#�#����������"����#�����������*��"#����#�" �5�����
See Also
� !��"���#�����������"��#���(��!����*��������������
Placing Messages on Hold
>�������� ��������������� ����#��#�#����#���������#��������#����������"���#�����=#������#"���7+���=��� ���#��������������� ��"���9�������#����#�"���� ����������#" ���������� ��� ������� �#�#����
Working with DRP/MPS Output
4–49OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������������������
1����)2���" ������#"���78 :$$9���������)2���#�" �5�����)��"���
$� �����*��"#����#�" �5������� ��#����������������5�����)��""��+���#���)��������
�� ������F� �0)� ����+���#���)��������
�����#����"�� "��#��� ��������
Clearing Messages
>�������� �����������+�����#�" �5�����)��"���"+�������������#�#������"#��
��������������
1����)2���" ������#"���78 :$$9���������)2���#�" �5�����)��"���
$� �����*��"#����#�" �5���������������������#����������� ��5�����+���#���)��������
�� ����"���#������������"���+#��"#����.����� ������������( �5����+���#���A"��������
Adding a Freeze Code to a Purchase Order
>�������+��G��#���#"�������@���#"#���� ���"�����������������#��#�)2052��������#������#��������#"���������#���������#��������>��+��G�������������.�+�������#"�#"������+"�� ���������������"�����#��#����.����"������"#������� "��
���������(��������������������
1���#���2����������2���"��������78: ($$9����������#��2���������
$� �����*��"#������F���������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��������������3
� ����D��.�
� 6����02 ��#
Manufacturing and Distribution Planning
4–50 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�� ������#������������������#������������#�" �)��""���+���#���)�������
� ���������#�" �����������������#����������(��"#"��� �-�+��+���#��)���������
:� ���������#�" �C�2����--������ �#��#���+� ��"���+"� ������� "�*��T3
� 1��G������
Working with DRP/MPS Output
4–51OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
1��G������ (������#��#�"��"��#��"+�#�������"�+�G����52�05)2����
��#�� ���+��+�G�������
A� "���������3
> >���+��G��#�������
D D��������#�+��G��#�������7��+�� #9�
Adding a Freeze Code to a Work Order
>�������+��G��#���#"�������@���#"#���� ���"������*�������#��#��)2052�������#������#��������#"���������#���������#��������>���+��G����*���������#�������"��"#�"��#���+��G��#"���+������
���������(��������'�� �����
1���#�����" ������2����#"���C��"��#�������78 $$$9���������#�0�����������
$� �����*��"#��5���+��#�"�����*���������� �#��#���+� ��"���+"� ������ "�*�1"��3
� ����
� ����-#���D��.�
� 6����0�2 ��#
�� ������#�����*�����#��#��������#�#��+��G������� "�*��� ��#�
Manufacturing and Distribution Planning
4–52 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����*�������#�" ��� "�*�#����#�#��,������#�.��������� �#��#��+� ��"���+"� �3
� 1��G������
4–53OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Understanding Forecast Consumption
1����#�������#"���"����"�#����"#��� ���"���+������ ��F��1����#������#"���"�.�������#�������#"���#��#���#�� �� ����������������������#���+����#���@���#"#"�������� ���.��"���"#������#"��#��7+����#9�(�#�� ��������� �����#��#��������#����#"��#���1����#�������#"����������������#������#���+�+����#���� ������"��#����� �� �#"���
1����#�������#"�����"���71�29���������+"�����������#����"��#��1����#�������#"���2�"���#�. ��71 :�49���"#�"�����1�2��#����#��������� ���������"�#�#�����������+����#�7@���#"#��#�����+�C1��;9�����+"#C"���+"#C��#�71-1�9�.�"�������#������#�����"#"��� �#"�����"���"+�#��+����#�������#���+�#���������#"�����"��������#���"��"����"#��#�����"��������#���+�#���#"����"��
�������"#"��� �+����#�������#"���#"�����"������"������#� �#��#������.��+�#"�����"���"���#"+"���"��#����"#".�#"���)�@�"����#�2 ���"����5�#�2����#"��������� �������5�#�"� �)�@�"����#�2 ���"��������#"�������������#�#� �+��� �#"�����"��������#��=�����4��
�����#����� ����� "��#���+����#�������#"����� �� �#"���"+������#�#�������"�#������"�����#"���
See Also
� '��������*������������ ������������
� �������������2� �*�����������2� �'�����
Manufacturing and Distribution Planning
4–54 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Past Due Time Buckets
>��������#�#������.���+���#�����#"���.��*�#�#��$������
Generationdate
PD1 PD2 1 2 3 4 5
Priorto current
FCP
FCP
Past Due Time Buckets
� ����+"#���#�����.��*�#�72��9�"�� ����� ���#"�"#��#��#�"������ ���#������.�+���#�������#������#"�����#��.�#��"#�"��#�������#�+����#������#"�����"���
� ������������#�����.��*�#�72�$9�"�� ����� ���#"�"#��#��#�"������ ���#������.�+���#���.��"��"����+�#�������#�+����#�������#"�����"���
-+���������#� ��#�������#�������"����#����#����� �� �#�����������@���#"#��+��#���+"#�#"���.��*�#���+� ��3
� 2�#�����+����#�7C1�����"��#��#��������#"�����#���.�#��+#��#��+����#�������#"���.��"��"�����#�9������������.�3
� 2�#������ ������7#��#��������#��"����9��.�#�����"#�"��#��+����#�������#"�����"���
� �� ������#��#������"������"#�"��#���+����#�������#"����"����.�#��"��#��#��������#"�����#��
� (������"�"���C1����"�������#��#���C1����"��#���+"#�.��*�#�#��#�"���#��#�����
Planning Horizon Time Periods
>����������"+��.�#��+����#�������#"���������"���������#���+�#���#"���"�����#���1����#�������#"���2�"���+����>������"+��#������.���+��" ������* �������1�2���"���"�� �����"��#���� ���"�����"G���"��#������"�����#"���+��#����)2052��������#"���������������#���������#� �������#����4��#�#� �#"����"������+����#�������#"�����"���.��*�#�
Understanding Forecast Consumption
4–55OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
-+��������"+�������.���+�� ���"�����"G������*�"��#�������"�����#"������#���#"����"������������#���"��"����"#����+����#�������#"�����"�������#����#������#�����#���#"����"��.��*�#�#���+ ��#�#���+����#������#"�����"���
-+�������+"���#���+����#�������#"�����"���.�����#������#���+����#������#"�����"�������������#���"��"����"#��#������#�C������#��"��#������+ ����� ������#����#����"� ���#���+����#�������#"�����#��7��#�#�����#�C������#�9�����#"����"��.��*�#�
>��������#�������"�����#"�����#��#�#����#����"�� "��#�� �#���+����#������#"�����"�������"�����"��-�@�"�����"��� �������"++���#"�#�.�#�����#���#"����"������#���+����#�������#"�����"���
Forecast Consumption Calculation
>�����+"���+����#�������#"�����"���#�������#�����"���"����"���� ��#��+����#������#"� ����+� ����������������C��������.��� ���������"��#"���� �������#��"�� ��������#��������#"����"��.��*�#�"��#����� �� �#"���+�#���+����#�������#"�������#�"������������"���#���� �������"����+�#"��7#���+����#�������#"�����"��9�+��#����#���#���������#������+����##��#������."�������� �������"����#��
�"#��+����#�������#"�������"����#����#������#���+� ��"���@���#"#�#���3
����7 1����#�@���#"#��+�������"+"��"#���+���#�����#�" �+����#�#�. �
��-7 (�#�� �� ������+���#���� ��������#�" �#�. �
��- �� ������#��#��=�����#���+����#��"� ����� �������C���"
���#��#����C1���
����� ��"����#�#��#�������"#�"��#���+����#�������#"�����"��
���� ;���������+����#
@"-)@�9- ��*���������� ���������3��� ��"����#�����#��#�����
#������#���+�+����#�����#�� ���������#���1�2
-��#���+� ��"����=��� �����*�����+��4������$4����"#�������������+����#�"���"#"������#�#���.��"��"����+�#���+����#�������#"�����"�������#����"�����@���#"#��7$:�9�������������+�#���+����#�7$�:��C�$:��?�$$��9���*���������������#��=���"#"�������"����"���#����="#"�����*����+���4��"����"��� �#��&4!�"����"���$�#��.� �������� ���"#���������"����"��$�
Manufacturing and Distribution Planning
4–56 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� ��������"#"������+#��#���+����#�������#��������#���+����#��(����#����� ��7#�����*�����"����"���:9������#���� ������
������
1 4 5 0 ;
O6(; ::4 C&4! C&4! C&�! C:4!
O6( ::4
O��; 4� $4�
O�� &4!
'1��; $�:�
'1��� $$��
'�F-2 $:�
'��; $4�
?�(; C&4! C&4! C&�! C:4! C:4!
?�(
6�" �"���� ����������#��#���+����#��#�#���.��"��"����+�#���+����#������#"�����"����"�"�"G��#��������+���=���"#"�������
4–57OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Orders
1���#�����" ������2����#"��������78 $$$9������������2���"��+
(+#���������52��)������#"�����52��D�#����������������2���"���#�������� #"� ����*���������������3�
� (##�����#�����#� "#�������#"���"�#��#"��
� ("������"�"#"� �����#�#�
� 8����#��#����������*�#��"�� ��"��3
� 2�#� "#
� )��#"���"�#��#"��
� ��������*�#������
� ��������#���#���
Before You Begin
� A�"+��#��#���*����������.������#��������� ���������.�������#��.��#���52��2 ���"���5�����������
See Also
� ����������!��"(������������'���������"��#���'���*��������� ��������
Processing Options for Work Order Generation
Process
1. Generate Parts List and ____________ Routing Instructions 1 = Parts list only 2 = Routing instructions only 3 = Both parts list and routing instructions Blank = Do not generate a parts list or routing instructions
Manufacturing and Distribution Planning
4–58 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2. Update Parts List and Routing ____________ Instructions 1 = Update the existing parts list and routing instructions. Blank = Do not update the existing parts list or routing.
Defaults
1. Work Order Date ____________ 2. Header Status Code ____________
Parts List
1. Substitutions ____________ 1 = Substitution processing performed Blank = Substitution processing not performed. 2. Prior Revision Level ____________ 1 = Prior revision level used Blank = Prior revision level not used 3. Preflush Items ____________ 1 = Material issued for all items Blank = Material issued only for preflushed items 4. Commitment Processing Bypass ____________ 1 = Commitment processing not performed Blank = Commitment processing performed per commitment control 5. Batch Bill of Material ____________ Processing 1 = Bypass batch bill processing Blank = Perform batch bill processing 6. Parts List Text ____________ 1 = Copy the component’s generic text Blank = Do not copy the component’s generic text
Routing
1. Unit of Measure ____________ 2. Document Type ____________ 3. Line Type ____________ 4. Beginning Status ____________ 5. Subledger Field ____________ 1 = Work order number entered into the subledger field of the purchasing journal entries Blank = Work order number not used.
Processing Orders
4–59OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6. Batch Routing Processing ____________ 1 = Bypass batch routing processing Blank = Perform batch routing processing 7. Routing Text ____________ 1 = Copy the operation’s generic text Blank = Do not copy the operation’s generic text
Sales/Config
1. Line Type ____________ 2. Next Status ____________ 3. Standard Cost Calculation ____________ 1 = Calculate standard cost 2 = Calculate standard cost only if it has not already been calculated Blank = Do not calculate standard cost
Printing 1
1. Work Orders ____________ 1 = Print work orders Blank = Do not print work orders or any associated information 2. Parts Lists ____________ 1 = Print parts list Blank = Do not perform any parts list print processing 3. Parts List Detail ____________ 1 = Print detail information Blank = Do not print detail information 4. Parts List on Separate Pages ____________ 1 = Print each parts list on a new page Blank = Print parts list on work order header page 5. Consolidated Parts List ____________ (FUTURE) 1 = Consolidate the parts list Blank = Do not consolidate the parts list 6. Parts List Component Text ____________ 1 = Print component (generic) text Blank = Do not print component text
Printing 2
1. Routing Instructions ____________ 1 = Print routing instructions Blank = Do not perform any routing instructions print processing 2. Routing Instructions on ____________ Separate Pages 1 = Print routing instructions on a new page Blank = Do not print routing instruction on new page
Manufacturing and Distribution Planning
4–60 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3. Routing Instructions Text ____________ 1 = Print routing instructions (generic) text Blank = Do not print routing instructions text 4. Shop Packet Summary ____________ 1 = Print shop packet summary Blank = Do not print summary 5. Sales Order Text Lines ____________ 1 = Print sales order text lines Blank = Do not print sales order text
Warehouse Mgt
1. Pick Requests ____________ 1 = Generate request only 2 = Generate request and process using subsystem Blank = No request processed 2. Location Driver Processing ____________ Version (R46171) 3. Staging Location ____________ 4. Staging Location Availability ____________ 1 = Check staging location for availability Blank = Does not check for availability
Versions
1. Work Order Print (R31415) ____________ 2. Shortage Report (R31418) ____________ 3. Bar Coding Report (R31413) ____________ 4. Inventory Issues (P31113) ____________ 5. Purchase Order Entry (P4310) ____________ 6. Manufacturing Specifications ____________ (R37470)
Interop
1. Work Order Transaction Type ____________ 2. Parts List Transaction Type ____________ 3. Routing Instructions ____________ Transaction Type 4. Work Order Header Before Image ____________ 1 = Include before image Blank = Do not include before image 5. Parts List Before Image ____________ 1 = Include before image Blank = Do not include before image 6. Routing Instructions Before ____________ Image 1 = Include before image Blank = Do not include before image
4–61OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Working with Multilevel Master Schedules
5� #" ��� ���#������� ������#����. �C#�C���������#"��������� "����
>����#�������������#���� #" ��� ���#������� ��#�3
� ��+"����������"�+���#"��������+��" ��.�"�������*�����������������
� ��+"���� ���"���." �#����@�"��#�����#"�������+��#���#��#������=���##��� ����������� ���#�"� ������"�����#"���������" �. ������� �����������*��"�+��������""����"#�"��#������" �. ��#"���+���������#������� ���"���." �#����#"+��� �������������"� ��##��#"���"�������
� ;���#���������#�� ����"#�����������"����#���������������"�����"+"��#"���
� ��#��"G����������� �������#"���#��"�� ������ ��#���"�+���#"���#��#�����@�"��
� �=� ����� ���������������#����������#�"#���
��*"����"#���� #" ��� ���#������� �����"#��+�#���+� ��"���#�*3
� ��##"������+��#���� �����������#���
� 8����#"����� #" ��� ���#������� �
What Are Planning Bills?
2 ���"���." ����������+�"#����"����." ��+���#�"� �+���#��#��#��+ ��#�������"#���"�� ���2 ���"���." ��� �������������#�����@�""#"����+�����"�#���+��#"�������+��#���#��#��"��#�.��"�� �����"����� ��. ������"#���
2 ���"���." �� �������#�����+"������K�����L�����"#����1����������"#�����������#������#���"�������"@�����#����.������"�#�"����." ��+���#�"� +����������."��#"����+���#"�������+��#���#��#��"��#�.��"�� �����"��#�����������#�
>�����+"���� ���"���." �#����@�"��#�����#"�������+��#���"��#�������#"��#��#������=���#�#��� ��(�+"�� ����. ������� ������"��#��#�����#�"� � ��#"����������. ���+#����������#��������#���#"���
Manufacturing and Distribution Planning
4–62 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+� ��"�������"��" �#�#����� ���"���." �+�������#���." ���"#��#�����"�����#"��3�
T1000 (Automobile)
(Options)
V–8 (75%) V–6 (25%)
ENG 100 (Engine Feature)
(���#����.������.���"�����#��#������"���+��#���+��� ���"�������������#������"�����#"��������#�.�����. ���#���#������#������"���+��#���������#�� ���="#�"��"����#����-#�"���������"#���
(�#��*"���#�����+�T�"���#"+"��#��#�#�������#�7��#���." �9�"�� ������+��"��#��������������*"#������+��#���"#���7���"��9������#��*"���#�����+��7����#��9��2���#����� �+�������"� �#�����+�����"���+����"���#�� ���#"���"�G�������#��������� "���"� �#C+�C �#�
����� �����������#�*������"�����#���." ���" ��"���"#����"������"�����=#���#���.�#�#����#"���+����"���#������������"����"�#�. �������� ���"���." �+���#�"� ��.����"���#"+"��#��������#�����+������#�����+����"���#��#�����=���#�#���"��
6���=� ��"���#�"�." ����"�#�#�����#������� ��+��#����$����+��" ���+��#���." ���#����#��������� �� �#��#���#�#� ��@�"����#�+�������#�����+���"���
Example: Exploding Planned Orders
-��#�"��=��� ���#����#����������#�������"���#������ ���������� ����+���#�������#�7�$������#���." �9��"��# ��#������#��#���� ���������� �����+�#������"���+��#���������#������#���+��#���� ���"�������#����#���=� ����#���� ����������� ����+��#������"���+��#�������#��#�������@�"����#�+��AC������AC&����"���
Working with Multilevel Master Schedules
4–63OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Weeks
Projected GrossRequirements
ScheduledReceipts
Projected AvailableBalance
Planned OrderRelease
2 3 4 5 6 7 81Weeks
Projected GrossRequirements
ScheduledReceipts
Projected AvailableBalance
Planned OrderRelease
2 3 4 5 6 7 81
Weeks
Projected GrossRequirements
Projected AvailableBalance
Planned OrderRelease
2 3 4 5 6 7 81
50 50 50
Weeks
Projected GrossRequirements
ScheduledReceipts
Projected AvailableBalance
Planned OrderRelease
2 3 4 5 6 7 81
50 50 50
50 50 50
12 12 1238 38 38
T1000 Auto
EngineFeature
V-8 V-6
Leadtime = 0
Feature Planning % = 75 % Feature Planning % = 25 %
ScheduledReceipts
5)2���@�"��#����@�"������"�����������#���������"#����. ��*�����������#��.�" ��#�������"����������������"����������+�����$������#���." ��"#�������"+"�����."��#"����+���#"����#�����"������"���"�����"##���#��#��� ��. ������"#����+#�������##����#�����#� "#�#��#�����*�����+��+"�� ���. ���
See Also
� ���������������'����������+���������"����+���#������� "��������#�����#��
Manufacturing and Distribution Planning
4–64 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Setting Up Feature Planned Percentages
>��������#������+��#���� �����������#����#����+"���#��������#�����+�������+�������"+"���+��#����.���������/��#���� ���
����������#������+��#���� �����������#��������������������#�������#���������"���#�������#��#"�� �����#�"#���"�.������ ���� ������#��������#�+������� ���"�����"�#"��������"��������"��#�.���� ���������
����������������������������
1���#�����" ��2�5��"��#�������78 �$$9����������#�0�������6" �
$� �����*��"#��6" ��+�5�#�"� ������ �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���"#���+����"����������#�#��� ������3
� 6����
� -#���D��.�
�� ������������������ "�*��� ��#�
Working with Multilevel Master Schedules
4–65OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����#��6" ��+�5�#�"� �-�+���#"�������� �#��#���+� ��"���+"� ������ "�*��T3�
� 1��#�2 ���Q
����� /&��������
1��#�2 ���Q ���������#�����+��������+�������"+"���+��#���.���
�����/��#��������#"����1���=��� ��������������"��#
�������&4Q��+�#��"� �."���#��"#���"����"��"#������
4Q��"#�� ����"��"#���.���������#�����������
����5�#�"� �2 ���"����#������#�"������#����#�
�����#� ��� ���+��������H���C�����#����
.�C�����#����#�������#��������� �����.���+�
�=��� �����#��4Q���4����������+�� #��� ���"��Q�
Generating Multilevel Master Schedules
1���#���2�"��"���"�� ���"#��2 ���"��������78 :��9��������52�)������#"���
������������#���52��)������#"����������#����#�������" ������#������ ���������#���52��D�#��������������������������#�#��"�� ������ �#����"#���#��#��������������"����#��� �#������#"����>����������#�����"����+�#���52��D�#�����������������"+"�� ��+���� #" ��� ���#������ "���
��������������#������ #" ��� ���#������� ���#����#����=� ����� ���������#��#���." ��+���#�"� ���������#������"���#"+"��#��������#�����+��
Manufacturing and Distribution Planning
4–66 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
��������#�"#����6���=� ��"���#���." ��+���#�"� ����"�#�#���#�#� ����.���+�=���#���� ���+�������#�"#�������������.#�"��#���#�#� ��@�"����#�+������"#����#������ ��� �"��#���." ��+���#�"� �
��������������#������#������� ���#����#������ ��#��� ��#��"�+���#"������+����� �� �#"�������������������#"��C������� ���"������� ��+��� �� ��#���"#���
Before You Begin
� ��#������ #" ��� ���#������� "���
See Also
� ����������'�����,$���������'���������+������"�+���#"����.��#�����#"�����#������� ������#����"���#�������"�����#"��
� �����#������2� �'������+��"�+���#"����.��#�����#����"���#"����"�������#"��������
MPS/DRP/MRP Parallel Processing
-��#������ � �����"�����#�����#����#���� �������#��������"#��"�� #����� ��.���"����� #"� �����������"���#����#�*��� �����������#����=���#����.�#������������������#��#��������#��������������������� � �����"�����#�������"����"��"+"���#���+���������"�����"����� "�"#����� ��.��#������.���+�������#��#�������" �. �������������
�����#������#��������#���.�#�����"���#�������� � �����"����-�#�"���"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������#��#�#����#������#���=���#��#����.�#�����"���
E���3������"�� ������#������#������ �#��#������#�*�"���#����#��.�+������������=���#��#������ � �����"�����#����
See Also
� �������������������������������
Material Requirements Planning
Manufacturing and Distribution Planning
4–68 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Material Requirements Planning
5�#�"� �)�@�"����#�2 ���"���75)29����"�+���#"���+���#���." ��+���#�"� ����"����#��������#���� �� �#��#���#"��C��������#���#�"� ��@�"����#�+��������������#�"#��������.���. ���5)2�����#����� ��"����#�� ���#�����#�#��������#"����+�#���@���#"#"��#��#�������"+"���"��#���5�#�2����#"��������� ��752�9�
(�"�� �C+��" "#���@�"����#�� ����"#"�� ���++��#� ���C ��� ���������#���������������*" ��� �.�������������"�� �C+��" "#��"�� "��5)2��#�#����������#� ��� �
����5)2���������"#��+3
� ��#��"�"������#����������7+����#����#�������������"�#�� ��#������9
� ��.#��#"������#����������7"����#����������������������*����9
� �� �� �#"������#����������������������������"#
>����������������#�"� ��@�"����#�� ���"�������+�#������3
� 1��G��#���52�����������#��5)2
� A� "��#��#���52������#���������#�������."��#"����+�52������5)2
������������������#�"� ��@�"����#�� ����#����#�������"G������#�"� ��@�"����#�+����������. �����������#��������#����.��+������#�"� �������@�"����#�� �������#�#���52��+�������#"�����"���"��#��� ���"�����"G���
>������������#������#�"� ��@�"����#�� ���+��� �"#�����+������#������������#"������"���"�� ������ ��#���"#���#��#��������������"����#��� �#�����#"����(+#�����������#��5)2���#��#������������"�������������#�������
�����#������#���+� ��"���"���#�#��5)23�
� ������
� (���"�����#H�+����#������ �����
� ��������#H�� ����������+"����*�����������
Manufacturing and Distribution Planning
5–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ���� �
� 1"����*����
� )�#������� �
� 2���������
� -����#��
� -�C���"�#���#"��
� 2����#���#�
� -#���6�����71:$��9
� 6" ��+�5�#�"� �5�#��71 ���9
�����#��������#��#���+� ��"�����#��#�+���5)23�
� (�#"����������"��������
� �"����"���"#���� �� �#���@���#"#"��+�3
� ���"���(��" �. ��7�(9
� (��" �. ��#��2��"��7(�29
� ���� �#"���(��" �. ��#��2��"��7�(�29
� 2 ���������
5�#�"� ��@�"����#�� ���"������"#��+�#���+� ��"���#�*3
� 8����#"�����#�"� ��@�"����#�� ��
� ��*"����"#����#�"� ��@�"����#�� ��
� A� "��#"�����#�"� ��@�"����#�� ��
� 2���"�������+��5)2
How Do You Use Bills of Material in MRP?
����." ��+���#�"� ����"��������#�#��#���"�+���#"���#��#�5)2����#��=� ����#�����#�������#"�������� ��#��� ���������#�"#����-+�����#� "#������#��="#�+������*������5)2������#"������#���#������." ��+��#�"� �#���=� �����������
����+� ��"���+��#�����#��"�����"�����������#��=� ���������#�����"+�#���@���#"#�����������#����#����� �� �#������� ����#�3
� �++��#"�"#������*"��
� 1��#���� ���"��������#���
� E���#"#����
5–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� 6" ��+���#�"� �����+��#�
� <���#"����++�#
� ����#"������
� 1"=�������"�. ��@���#"#��������. �
What Are the Differences between MRP and MPS?
52������� �����"���������#�����������" ��5)2������������#��������-���������#��������"��������+�����"#���#��#�"���� �#���#��#����������+��#���"#�����������������+��+"�"������������������#��������"�������#��#�"��"��# ��� �#���#������"����+���#���." ��+���#�"� �#��#���+���#��"#��������������#��5)2��"��#�� ��"�� ����+����#������ ������"+�"#������ ������"���7���9���#��������/�"#���+�����������������"�������+�������#��������������������5)2�"�� ���3
� 1"������� ��������*�����+��������#�"#��
� �� ����������+����#�+������"�����#
� -�#�� ��#�������
Manufacturing and Distribution Planning
5–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+� ��"���" �#�#"����������#���5)2�����52��+ ����
Validated MasterProduction Schedule
Demand Supply
Service Part’s Validated Forecast Firm Work Orders
Messages
Time Series
Supply/Demand Inquiry
Validated Material Plan
Service Part’s Open Sales Orders Rate Schedules
Parent’s Planned Work OrderOpen Purchase Orders
Parent’s Firm Work Order Demand
In-Receipt Routing
Inventory
Purchase Orders Planned Work Orders
Product DataManagement
Capacity RequirementsPlanning
MaterialRequirements
Planning
Firm Work Orders
Shop Floor ManagementPurchasing
5–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
How Do You Run MRP Effectively?
5)2������#��++��#"�� ����������������#����������������� "�"#���+�#��+� ��"���"#��3
,������������� �����#��#�#�����#������� ��"��#� ��#�%4������#
�����#���(�������"��������.�������"���#������#"��
�+�������������#�#��#�����+��������+�#�������� ��
.������������� �����#��#�#���." ��+���#�"� �"��#� ��#�%�������#
�����#���������#�"��#�������#���������#����
@���#"#"���(�������"��������.�������"�������#��
"#���"�.�" #�"��#���+��#���#��#�������#���������#����
@���#"#"�����#�"����"��#���." ��+���#�"� ��-+�����+"����
�"��������.�#�����#�����#� "#�����#���." ��+���#�"� �
#���." ��+���#�"� �"���#������#��
��%������ �����#��#�����"����#�������#�"��#� ��#�%4������#
�����#���>����������"����#�"���������#������#������ �
����#������
9�������� �����#��#����� ���#"�������� "���D�#��#��#�#����#��
���"���� ������ ���#"����-�����#"����#�����#�� �#"���"#
#�*��#������ �#�����������������
Manufacturing and Distribution Planning
5–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Generating Material Requirements Plans
1���#����"�� ���"#��2�"��"��2 ���"�������#"��������78 :��9�������5)2)������#"��+
;��5)2�)������#"���#�����������"�� �C+��" "#��5)2�� ���"�������� ��+�#���"#���#��#������ ��#��( #���#"�� ��������������5)2�D�#��������#����������"�� �C+��" "#��5)2�� ���"�������� ���>������������#������#�"� �@�"����#�� ���+�3
� (�"�� ��"#��
� ( �"#��
� �� ��"#���#��#�����++��#���.��#����#"���"����#��� �#������#"��
��������������#������#�"� ��@�"����#�� ����#����#������ ��#��� ��#��"�+���#"������+����� �� �#"�������������������#"��C������� ��"����#�� ���+��� �� ��#���"#����5)2�������#"������#���������������)2052��������#"���
)��"���#���+� ��"���#��"��+��+�#���"�+���#"����.��#������#"���#���5)23
.������������� 5)2����#���." ��+���#�"� �#���=� �����������#���
��������#�"#����-+�����#� "#�������#��="#�+������*
�����5)2������#"������#���#������." ��+���#�"�
#���=� ������������
>������ ����+"�����." ��+���#�"� �#����5�7#�����
����+��#�"���." 9�+����*������������"#���#��
��#� "#�����+������#�� ���������������5)2
�����#"������." �#����5�#���@������"#��������"��
#������#��������#�"�.�" #�
9�'���%������ �����#������#��� ��C ��� ������#����#��"�������#
������������#�� �#"���"��������#����=� ���
����#��������#��#�����������#��5)2������#"��
�=� ���� ���� ��� ���������� ��+������+��#���
"#���������#���������#��=� �����������#�� ���
.� �������������"#���������"+�#��#�"#��������." ��+
��#�"� ��
Manufacturing and Distribution Planning
5–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
!������������ >�����#���������#"���#����:�����4�#�������#���
��#��� ���"�������� ��+��5)2�"#����-+�#���#�#���+
52��"�+�G���������#"���#����4��=� ������ ��#��
��������#�"#����+�#�����#������� ���"#������ ��#
�����#"���#����:�#���=� ����52��"#���������������#
"#����
���(�������� -+�����"���#"+����*������������������+�����"#��
��+�G����#���������������#��� �����������+��#��
"#����-�#������������"�����+�G�������������+��#��#
"#����
$������������ ���������5)2�������#"����.�������� ��#"�����
.����0� ��#����#���������������� ���"������������
�#����������������� ��#"���+���.���C���#�. �
+"� ���
����������#�������������#"�����#�#�����#��������+ ���#�
$�#��� ��#�"#���#��#��������������"����#��� �#
�����#"����+�#���������
>������������"��#���������� �#����#���+����� � �����"����-��#����� � �����"�����#�����#����#���� �������#��������"#��"�� #����� ��.���#" "G"����� #"� �����������"���#����#�*��� �����������#����=���#����.�#������������������#��#��������#��������������������� � �����"�����#�������"����"��"+"���#���+���������"�����"��
��� "�"#����� ��.��#������.���+�������#��#�������" �. �������������
�����#������#��������#���.�#�����"���+����� � �����"����-��#�"��"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������������#������#����������#���=���#��#���.�#�����"���
Before You Begin
� A�"+��#��#�5)2����.�����#����
� ;���#����#���������#�����#������".���"�����������������'���������+
� 8����#����+����#�+��"���������#C�������"#����������������&�����*���������"��#���*���������������+
See Also
� �������������������������������
Generating Material Requirements Plans
5–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� '�������������������'���� �+��"�+���#"����.��#�����#����+"���5)2��#��#��#�#����#��������"�������"��
� �����#������ ����3��������+��"�+���#"����.��#�����#�����#���D�#�������)��"���������#����"���"#���#��#����������������"#��#������� ����������� ��������#"�"#"�
� ����������'�����,$���������'���������+��#�������"�����#"���+�#�"������
Manufacturing and Distribution Planning
5–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Working with Material Requirements Plans
5)2���#��#����"#��+�"�+���#"���"��#���#"����"��������#"����������;�#���#"����"��"�+���#"���#�����"������#���#�������#�#���� ���"�������#��.��#����#�����#�����"���"#��>������ ����"���#�����#"���������+�"��"�"��� �"#������.��#����#��"�����"�����#"����"+������#��#����������#�#�*��
��*"����"#����#�"� ��@�"����#�� ������"#��+�#���+� ��"���#�*3
� )��"��"���5)2�#"����"�
� )��"��"���� ���"���+��" "��+��5)2
� ��*"����"#��������+��5)2
� ��*"����"#������� "���"�+���#"��
Reviewing MRP Time Series
1���#���5)2���" ������#"��������78 :$ 9��������5)2��"�����"�0(�2-�@�"��
;��#���5)2��"�����"��-�@�"��������#����"���#���"#����"��+��#����#�"� ��@�"����#�� ��������#"����"��"���������+�#"��C��������� ��������������##"���+��� ��#���"#���������#����#"����#�"���#��+���#����#�����#������#"�������#������������;������"�����#"���#���#�����" ������* ��������#� ��#"�����"���7.��*�#9�
5)2��"�����"��-�@�"��"�#����������������)2052���"�����"�0(�2-�@�"���>�����������#����##"���"��#�������"�����#"���#�����������#��#���"++���#��@�"����#�+��5)2�
Manufacturing and Distribution Planning
5–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
;��5)2���#�" �5�����)��"���#����"���#���@���#"#��#����#��#���������#��+��#�����#�"� ��@�"����#�� ���������@���#"#��#����"�� ���3
�������������@�9-� )�����#�������������� ��"����#�����+����
"#���
�������'�� �����
�G�"-�
)�����#��������+����������#�#��#��" �.�
������������#��+�#���� ��������*�����+��#��
����+��#����+�#�������#�"#���
"�� ������@"-� )�����#�������+��#�"�������#��#�"�����# ��"�
�������#��#����.������#��"G���#��.����*������
����'�� �����
�G�"-�
)�����#��������+����������#�#��#��" �.�
������������#��+�#���� �������*�����+��#��
����+��#����+�#�������#�"#���
Before You Begin
� 8����#��������#���#�"� ��@�"����#�� ���#��#�"�� ����#���#�#����������#��+��#���� ���"�����"���#��#��������#�#����"��������������������������.���� ���������+
See Also
� �����#������2� �'�����
Reviewing Planning Families for MRP
1���#���5)2���" ������#"��������78 :$ 9�������5)2�2 ���"���1��" �)��"���
(+#�����������#��#�����#�"� ��@�"����#�� ��������������"���� �"#�����.��#��#�������������>��������"� ���#��� "#��+�"#����"#��������.��"���#���+� ��"���+" #�3
� 6����02 ��#
� ������#�
� 2 ���"�������
� 5����������#��*"�������
� 2 �����D��.�
Working with Material Requirements Plans
5–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� 6����D��.�
� 5�#��2 ���"���1��" �
5)2�2 ���"���1��" ��)��"���"�#����������������)2052��2 ���"���1��" �)��"����>�����������#����##"���"��#�������"�����#"���#�����������#��#���"++���#��@�"����#�+��5)2�
See Also
� �����������������������������*� ���
Working with Messages for MRP
1���#���5)2���" ������#"��������78 :$ 9��������5)2���#�" �5����)��"���
(����#����������"��# ���"���#�����#�" �5�����)��"������������� �#��#���+� ��"���#�*3
� )��"���5)2���#�" ������
� 2������*�����������+��5)2
� 2���������������������+��5)2
Manufacturing and Distribution Planning
5–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����#"������������#������#�"� ��@�"����#�� ����#����#��������#���#"���������#��"���#"+��"#��#"���"����"�����������@�"�������+�#��+� ��"��3
� �����"���#����="#"������ �����
� 2 ��"����������
;��5)2���#�" �5�����)��"���#����"����=���#"���������+���#��� �#�#� ���"��������#"����������������"��#��� ��������� ��#��� ����������="#"��������>���������"���#�����#��"#"�� �������+"#�������"����#��������"��#�������#��#����������#����
5)2���#�" �5�����)��"������#����������������)2���#�" �5����)��"����>�����������#����##"���"��#�������"�����#"���#�����������#��#���"++���#��@�"����#�+��5)2�
See Also
� !��"���#����������+��#�������"�����#"���+��#�"������
Reviewing MRP Detail Messages
��#�" �������"�� ����� ��+�#��������������#�" �5�����)��"����(+#����������#������#�"� ��@�"����#�� ����������"���#�����#"���������+�#���"��"�"��� �"#������.���(+#��������"�������������������������+�������+�#���+� ��"��3
� 2 ����#�������������� �
� � ���#��������
� �� �#��#��������
� 2����#��������
6�������#���������+��#�������#�"#����#����"��#���������#�� �����"�����"����������(#�#�����������#� ��� ��#����������"� ���������#��#���"�" ��#�����"���������7(9��( #������.�#��#�����+��������"�"��#�+���#�������#��#�����������"��"��#��#��#�#�������#��������"�+"�� ������
����+� ��"���#�. �����".������#����#�������������#�#�����@���#"#�#�����������*������������"���#���5)2������#"��������
E���3��#�#���������������+"����
Working with Material Requirements Plans
5–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
"�� -����-��������$*�3,��3,*�
$������� ��� ����������
-���������
$��������� ��������$�����
�2�7O2<�9 �#�#��?�27� �����9
2 ������������2�"����#��C�����#���������#�#�����"#���#���������"��#����*�����5�#��#�. ��71:��$9��)2052�05)2���#���#"�� ������������� ����#������@���#"#"�������#"���������#���������
'2��
���7O��������#� �����@�� O��;�"������ ���#���@���#"#"�9
�#�#��?�$�7+"�9
1"������������"���������"��#����*�����5�#��#�. ��71:��$9��)2052�05)2����#��������#��#�@�"��� �������#"���#��.� �������� �������������1����������#��������#����#��������#��#�#���� ������" #�*����#"���
'1��0'1��;��5����#����(������.��#����#���� �0������"�.� ������'1��������#�� �����@�� '1��;�"������� ���#����@���#"#"��
���7O��������#� �����@�� O��;�"������ ���#���@���#"#"�9
�#�#��?�:�7+"�9
1"������#��#��������#� "#������#"���"�#��#"����##�������)2052�05)2����#��������#��#�@�"��� �������#"���#��.� �������� �������������1����������#��������#����#��������#��#�#���� ������" #�*����#"���
'1��0'1��;��5����#����(������.��#����#���� �0������"�.� ������'1��������#�� �����@�� '1��;�"������� ���#����@���#"#"��
���7O��������#� �����@�� O��;�"������ ���#���@���#"#"�9
�#�#��?�:$7+"�� ��������9
1"�������"#��+"��� ���������������#��#������.����� ������.��������#"����+��)2052�05)2����"+�"��#�#��:$�"��#������"�����*������#�#�����"�����#"�����)2052�05)2����#�������#��#��@�"��� �������#"���#�.� �������� ��������������1���������#���������#����#�������#��#�#���� ������" ���#�#�*����#"������������������12��� ��������*�
'1��0'1��;��5����#�����������.��#��� �0������"�.� �����+��12�����#��'1���� ����@�� �'1��;�"������ ����#���@���#"#"��
���7O���@�� �O��;"������� ���#���@���#"#"�9
-�"��+��G�+�����7���#�#�����9
( �+"������"�"���+��G��+������)2052�05)2�������#��"� �����#"��������"�"���#���+��G��+������������������#��������#����(����"��#��"��"��#��#����"������ ������������"�.� �����"�"���#���+��G��+��������������������#�������#"����������#"���#���+��G��+�����#������#�#����� �0�������"�.� �����
'1��0'1��;�����������������#����#�������+���#������#��������
���7O���@�� �O��;"������� ���#���@���#"#"�9
1��G����������*���������7����#�#�����9
1�G���+"��������)2052�05)2������#����#����#"���������+��#������*������������������#�������#����(�����1����"����������������#��������+����������#���#"+���� �0�������"�.� �����
'1��0'1��;�����������������#����#�������+���#������#��������
See Also
� �����#���&������������
Manufacturing and Distribution Planning
5–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Work Order Messages for MRP
��*����������������������#�" �5�����)��"����"#���������#�����+��������������������*������������#�����#������� ��.�����+"��#������#�����#���+�#��������������������+"�������" ���#�.���#���#"�� ��� ������"���.�@���#�52�������#"���
Processing Purchase Order Messages for MRP
2���������������������������#�" �5�����)��"����"#���������#����+��2�������������������������������������������3�
� 2������"�� ����#"����������"#���#�. ��*�#���������*"�������� "��#"���
� 2����������������#"����������"#��. ��*�#���������*"���
� 2�����������"������������������ "��#"���#��� ��������#�������"#�������������������
� 2����������������������"������ ���"���+��" ��
� 2�����������"���#������� "�������� "����#���
E���3�-+����"#���������#����������� "���"�����#��"#��#����#���"� ������������������#������� "�����.������� "�*��T�
See Also
� ����������!��"(�����������
� ������������������(�����������
� �����������������������������*� ���
Working with Scheduling Information
-����" ������#"���������"��#������#��"���#"+����#�" �"�+���#"����.��#�"#�����*����#������ ���"���+��" "���;��#���5)2�"�@�"��������#����#��"��#���#�#���+�"#�������*����#��
���� �#��#���+� ��"���#�*3
� )��"���5)2�����"���������
� )��"���5)2���� ������������
� )��"�������+ �����*.�����+��5)2
� )��"��� ���#"���+��5)2
Working with Material Requirements Plans
5–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing MRP Pegging Demand
;��2���"���-�@�"��#����#��"������K����L�#���������+��������+���������#��@�"����#��2���"���-�@�"���"� ����� ��#��������#�#��#���#�"��� ������������������2���"���-�@�"��� �������#�3
� �"� ���#�����*�����+������#"�� ��"#��
� �����#���������+��������+�������"#��
� �"� ���#����"++���#� ��� �"����." ��+���#�"� ���#��#�������������������+���#���.��"��"��� ��� �#������#�������#�"#��
>�������#����#�����#���+���������#��@�"����#����#����������#�"#���#�#���+"�� ����. ���"#������������#��#���� ��������+����#��>���������#�"�"�+���#"���#����#��"���"+����������#�������� ���������������
���%��',*�������������
1���#���5)2���" ������#"��������78 :$ 9��������2���"���-�@�"��
$� �����*��"#��2���"���-�@�"������� �#��#���+� ��"���+"� ��#�� ���#�#���"#���+����"����������#�#����"�������"���������3
� 6����02 ��#
� -#���D��.�
�� �����������������#�������"+"����#������� �#��#���+� ��"���+"� ������ "�*�1"��3
� )�@��#�����#�
Manufacturing and Distribution Planning
5–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
)�@��#�����#� ������#��#��#����"#���"�#���"�����#��#������#"���"�#��.�
���� �#��
Processing Options for Pegging Inquiry
Versions
Enter the version for each program. If left blank, version ZJDE0001 will be used.
1. Message File Revisions ____________ 2. Time Series ____________ 3. Supply and Demand Inquiry ____________ 4. Item Branch (P41026B) ____________
Reviewing MRP Supply and Demand
;������ �������������-�@�"��#����"���#�������#��������+����� ��#��"#�������� �������������-�@�"��� �������#�3
� �"� ���#�������#�"����#�����"#"����"�� ��"���� ������ ������ �����������
� )��"���"#���@���#"#����� ����������������������" �." "#��"����#�����
Working with Material Requirements Plans
5–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%��',*��������������
1���#���5)2���" ������#"��������78 :$ 9������������ �0������-�@�"��
$� �����*��"#������ ������������������ �#��#���+� ��"���+"� ��#� ���#��#���"#���+����"����������#�#����"������ ������������3
� 6����02 ��#
� -#���D��.�
�� �����������������#�������"+"��������#������� �#��#���+� ��"��+"� ������� "�*�1"��3
� ������#�
Processing Options for Supply/Demand Inquiry (P4021)
Display 1 Tab
;��#��������"�����#"���#�����"+�����#���#����#����"� ���#��+� ��"����� ���"��#������� �0�������-�@�"��������72:��$93
� (��" �." "#���"#���#��+�#��#��*
� )��#"���"�#��#"���@���#"#"�
� )��#"���"�#��#"���#���@���#"#"������"G��
Manufacturing and Distribution Planning
5–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
1. Deduct Safety Stock
;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#����+�#�#��*� "��������������#����+�#��#��*�+���#������" �. ��@���#"#���A� "��� �����3
6 ��* �����#���������#������#��+�#��#��*�$ �����#��������#��+�#��#��*�
2. Routing Quantities
Quantity in Transit
;��#�"�����"�����#"���#�����"+�����#���#����#������"���#���E���#"#�"�����"#���#��+�#�����C�����@���#"#���-��������+��#�"������"�����#����#"���"#�"��������#���#�. "�������#��*�"��"������#����#��"�����#���"#�"����" �. ��+��"����"�#������A� "���� �����3
6 ��* �����#����"� ���#���E���#"#��"�����"#�+��#��������"�#����#��$ �����#���"�� ����#���E���#"#��"�����"#�"��#�����C�����"����#���
Quantity in Inspection
;��#�"�����"�����#"���#�����"+�����#���#����#������"���#���E���#"#�"��-����#"�����#��+�#�����C�����@���#"#���-��������+��#�"������"�����#����#"���"#�"��������#���#�. "�������#��*�"��"������#����#��"�����#���"#�"����" �. ��+��"����"�#������A� "���� �����3
6 ��* �����#����"� ���#���E���#"#��"��-����#"���+��#��������"�#����#��$ �����#���"�� ����#���E���#"#��"��-����#"���"��#�����C�����"����#���
User Defined Quantity 1
;��#�"�����"�����#"���#�����"+�����#���#����#������"���#���;���+"����E���#"#��$���#��+�#�����C�����@���#"#�����"�@���#"#��"���+"����"��#��;���#������#"���$�+"� �����#���)���"�#�)��#"�����+"�"#"���+����-�������+��#�"������"�����#�����#"���"#�"��������#���#�. "�������#��*"��"������#����#��"������#���"#�"����" �. ��+��"����"�#������A� "���� ����3
6 ��* �����#����"� ���#���;����+"����E���#"#��$�+��#��������"�#����#��$ �����#���"�� ����#���;����+"����E���#"#��$�"��#�����C����
"����#���
User Defined Quantity 2
;��#�"�����"�����#"���#�����"+�����#���#����#������"���#���;���+"����E���#"#������#��+�#�����C�����@���#"#�����"�@���#"#��"���+"����"��#��
Working with Material Requirements Plans
5–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
;���#������#"�����+"� �����#���)���"�#�)��#"�����+"�"#"���+����-�������+��#�"������"�����#�����#"���"#�"��������#���#�. "�������#��*"��"������#����#��"������#���"#�"����" �. ��+��"����"�#������A� "���� ����3
6 ��* �����#����"� ���#���;����+"����E���#"#����+��#��������"�#����#��$ �����#���"�� ����#���;����+"����E���#"#����"��#�����C����
"����#���
3. Receipt Routing Summary
;��#�"�����"�����#"���#�����"+�����#���#����#�������"G��� @���#"#"��+��#���-��)���"�#���#"���#���"�#������ "����A� "���� �����3
6 ��* �����#���������#�����"G��$ �����#�������"G��#���-��)���"�#���#"���#���
Display 2 Tab
;��#��������"�����#"���#�����"+�����#���#����#����"� ���#��+� ��"��3
� �����"G���"#��� ���#"�������
� ���� �0�������-�@�"��������72:��$9�"��#����"�����+���#
� 2 ���������
� 6� *�#��*"���#��������
1. Item Location Summary
;��#�"�����"�����#"���#�����"+�����#���#����#�������"G��� �#��@���#"#"��"��#���"#��� ���#"��������"�#������ "����A� "���� �����3
6 ��* �����#���������#�����"G��$ �����#�������"G��� �#���@���#"#"��"��#���"#��� ���#"��������
2. Window Mode Display
;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#������� ��,�������-�@�"��������72:��$9�"��#����"�����+���#�"+��� ���+������#���������A� "���� �����3
6 ��* �����#����"� ���#���������"��#���+� �+���+���#�$ �����#����"� ���#���������"��#����"�����+���#�
Manufacturing and Distribution Planning
5–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3. Include Planned Orders
;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���� ���������+���52�05)20�)2������#"����A� "���� �����3
6 ��* �����#���������#��"� ���� ����������$ �����#����"� ���� ����������
4. Exclude Bulk Items
;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���.� *�#��*"��#����������A� "���� �����3
6 ��* �����#����"� ���.� *�#��*"���#���������$ �����#���������#��"� ���.� *�#��*"���#���������
Display 3 Tab
;��#��������"�����#"���#�����"+������#����#���������#���+� ��"��@���#"#"�3
� ��*�����@���#"#�
� (��" �. ��@���#"#�
1. Convert Quantity
;��#�"�����"�����#"���#�����"+�����#���#����#��������#�@���#"#"��#�#���#��������#������A� "���� �����3
6 ��* �����#���������#������#�#���@���#"#"��$ �����#��������#�#���@���#"#"��
2. Reduce Expired Lot Quantities
;��#�"�����"�����#"���#�����"+�����#���#����#��������#�#����=�"�� �#�@���#"#"��+���#������" �. ��@���#"#���A� "���� �����3
6 ��* �����#���������#�������#������" �. ��@���#"#��$ �����#���������#������" �. ��@���#"#��
��"�����"�����#"���������#���*��"#�����" �. ��#�����"�� "����-+������������ ���$�"��#�"�����"�����#"����������#��#�#���(��" �. ��#��2��"�<"���1 �������"�����#"���������#���2����$���.��#���"#���. ��*�����
Working with Material Requirements Plans
5–23OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Process 1 Tab
;��#��������"�����#"���#�����"+�����#���#����#����"� ���#�����" �. ��#�����"�� "�����#������� �#"������" �. ��#�����"�� "��������#����+�� #�"�� �"�����"���������+�� #��#�C.��������� ��#����
1. Available to Promise Line Flag
;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���������" �. �#�����"�� "���������� �#"������" �. ��#�����"�� "��������"#����A� "���� ����3
6 ��* �����#���������#��"� ����"#��� "���$ �����#����"� ���#������" �. ��#�����"�� "���� �����#����"� ���#������� �#"������" �. ��#�����"�� "���
-+�����������#���"� ���#������" �. ��#�����"�� "���7�� ���$9�"��#�"����"�����#"�������������#����#����"� ��� ���.��)�������=�"���<�#E���#"#"������"�����#"���7�.���9�
2. Supply and Demand Inclusion Rules Version
;��#�"�����"�����#"���#�����"+��#������ �������������"�� �"���� ���"���+��#����#���#������������ ����+"���#�������#����� "���#������� "���#�#���-�� �"���� ����"���"��������+"���������7:�0)A9�#��#�"���#"+"�#�����"���#�����+������"������#�����"�� �"���� ��#�������#�����+�� #�� �����������"#�+���#����� ��#�;����+"��������+���
3. Rate-Based Schedule Type
;��#�"�����"�����#"���#�����"+��#����#�C.��������� ��#����+��#���#���#���"� ����)�#�C.��������� ��#����"��������+"���������7 $0��9�#��#"���#"+"��#�������� ��#�������#��#���#����#�������#�����+�� #��� ����������"#�+���#����� ��#�;����+"��������+����-+����� �����#�"�+"� ��. ��*��#���#���������#��"� ��������#�C.��������� ��
Process 2 Tab
;��#��������"�����#"���#�����"+����"���+����#�#����#��"�� ����"��#��"�@�"������#������.���+�����+���#����#�����#��#��"�� ����"��#���+����#�����
1. Forecast Types
;��#�"�����"�����#"���#�����"+����"���+����#�#��������#��+"����#��#�#���#���"�� ����"��#���"�@�"���-+����� �����#�"�+"� ��. ��*��#����#���������#"�� ��������+����#���������#���� #"� ��+����#���+� ��3������#���$���������61��#�����$��61�
Manufacturing and Distribution Planning
5–24 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2. Number of Days
;��#�"�����"�����#"���#�����"+��#������.���+�����7O���'9�+���#���#�����#��#��#��������#�#����#���#��"�� ����+����#�������-+����� ����#�"�+"� ��. ��*��#����#������#����#�����#��
Versions 1 Tab
;��#��������"�����#"���#�����"+��#�����"����+�#���+� ��"��������#��#�#����#�������"#��#������� �0�������-�@�"��������72:��$93
� 2������������#��72: $$9
� 2����������-�@�"��72: $�9
� �� ��������#��72:�$$9
� �� ������-�@�"��72:��:49
� ������ "�����*.�����72 $��49
� 5)2052�0�)2�2���"���-�@�"��72 :$�9
A�"������#� �����#����������"� ���"�+���#"��������+���������"��#�����#���#�#�������"�����#"���#�����"+"����"���#�����#����������
1. Purchase Order Entry (P4311)
;��#�"�����"�����#"���#�����"+��#�����"����+�#���2������������#�������72: $$9�#��#�#����#������������� �+����������+����="#�+��#�����*��"#������ �������������+����-+����� �����#�"�+"� ��. ��*��#���#������#���U������$���"����+�#���2������������#��������
A�"������#� �����#���2������������#���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������
2. Purchase Order Inquiry (P4310)
;��#�"�����"�����#"���#�����"+��#�����"����+�#���2����������-�@�"�������72: � �$9�#��#�#����#������������� �+����������+����="#+���#�����*��"#������ �������������+����-+����� �����#�"�+"� ��. ��*��#���#������#���U������$���"����+�#���2����������-�@�"��������
A�"������#� �����#���2����������-�@�"���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������
Working with Material Requirements Plans
5–25OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3. Sales Order Entry (P4211)
;��#�"�����"�����#"���#�����"+��#�����"����+�#����� ��������#�������72:�$$9�#��#�#����#������������� �+����������+����="#�+��#�����*��"#������ �������������+����-+����� �����#�"�+"� ��. ��*��#���#������#���U������$���"����+�#����� ��������#��������
A�"������#� �����#����� ��������#���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������
4. Sales Order Inquiry (P42045)
;��#�"�����"�����#"���#�����"+��#�����"����+�#����� ������-�@�"�������72:��:49�#��#�#����#������������� �+����������+����="#�+��#�����*��"#������ �������������+����-+����� �����#�"�+"� ��. ��*��#���#������#���U������$���"����+�#����� ������-�@�"��������
A�"������#� �����#����� ������-�@�"���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������
5. Scheduling Workbench (P31225)
;��#�"�����"�����#"���#�����"+��#�����"����+�#��������� "�����*.����������72 $��49�#��#�#����#������������� �+����������+����="#�+��#�����*��"#������ �������������+����-+����� �����#�"�+"� ��. ��*��#���#������#���U������$���"����+�#��������� "�����*.�����������
A�"������#� �����#��������� "�����*.������������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������
6. Pegging Inquiry (P3412)
;��#�"�����"�����#"���#�����"+��#�����"����+�#���52�05)20�)2�2���"��-�@�"��������72 :$�9�#��#�#����#������������� �+����������+���="#�+���#�����*��"#������ �������������+����-+����� �����#�"�+"� �. ��*��#����#������#���U������$���"����+�#���2���"���-�@�"��������
A�"������#� �����#���2���"���-�@�"���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������
Manufacturing and Distribution Planning
5–26 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Versions 2 Tab
;��#��������"�����#"���#�����"+��#�����"����+�#���+� ��"��������#��#�#����#�������"#��#������� �0�������-�@�"��������72:��$93
� 5)2052�0�)2��"�����"��72 :$ 9
� 5)2052�0�)2�5�������#�" �72 :$$9
� 6" ��+�5�#�"� �-�@�"��72 ����9
� -#���6�����72:$��&69
� 5���+��#�"�����*�����2���"���72:��$ 9
� ��#�0�������)�#�������� ��72 $�%9
� -#���(��" �." "#��72:$���9
A�"������#� �����#����������"� ���"�+���#"��������+���������"��#�����#���#�#�������"�����#"���#�����"+"����"���#�����#����������
7. MPS Time Series (P3413)
;��#�"�����"�����#"���#�����"+��#�����"����+�#���52���"�����"�������72 :$ 9�#��#�#����#������������� �+����������+����="#�+��#�����*��"#������ �������������+����-+����� �����#�"�+"� ��. ��*��#���#������#���U������$���"����+�#���52���"�����"��������
A�"������#� �����#���52���"�����"���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������
8. MRP/MPS Detail Message Revisions (P3411)
;��#�"�����"�����#"���#�����"+��#�����"����+�#���52�05)2���#�" 5�����)��""���������72 :$$9�#��#�#����#������������� �+���������+����="#�+���#�����*��"#������ �������������+����-+����� �����#�"+"� ��. ��*��#����#������#���U������$���"����+�#���52�05)2���#�" 5�����)��""���������
A�"������#� �����#���52�05)2���#�" �5�����)��""����������"� ��"�+���#"��������+���������"��#������#���#�#�������"�����#"���#�����"+"���"���#�����#����������
9. Bill of Material Inquiry (P30200)
;��#�"�����"�����#"���#�����"+��#�����"����+�#���6" ��+�5�#�"� �-�@�"�������72 ����9�������#��#�#����#������������� ���+���������+����="#�+���#�����*��"#������ �������������+����-+����� �����#�"�+"� �. ��*��#����#������#���U������$���"����+�#���6" ��+�5�#�"� �-�@�"�������
Working with Material Requirements Plans
5–27OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
A�"������#� �����#���6" ��+�5�#�"� �-�@�"���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������
10. Item Branch (P41026B)
;��#�"�����"�����#"���#�����"+��#�����"����+�#���-#���6����������72:$��&9�#��#�#����#������������� ���+����������+����="#�+���#����*��"#������ �������������+����-+����� �����#�"�+"� ��. ��*��#����#�����#���U������$���"����+�#���-#���6�����������
A�"������#� �����#���-#���6������������"� ���"�+���#"��������+��������"��#������#���#�#�������"�����#"���#�����"+"����"���#�����#���������
11. Manufacturing Work Order Processing (P48013)
;��#�"�����"�����#"���#�����"+��#�����"����+�#���5���+��#�"�����*����2���"���������72:��$ 9�������#��#�#����#������������� ��+����������+����="#�+���#�����*��"#������ �������������+����-+���� �����#�"�+"� ��. ��*��#����#������#���U������$���"����+�#��5���+��#�"�����*�����2���"���������
A�"������#� �����#���5���+��#�"�����*�����2���"���������"� ���"�+���#"��������+���������"��#������#���#�#�������"�����#"���#����"+"����"���#�����#����������
12. Enter/Change Rate Schedule (P3109)
;��#�"�����"�����#"���#�����"+��#�����"����+�#�����#�0�������)�#������� ��������72 $�%9�������#��#�#����#������������� ���+���������+����="#�+���#�����*��"#������ �������������+����-+����� �����#�"+"� ��. ��*��#����#������#���U������$���"����+�#�����#�0�������)�#������� ��������
A�"������#� �����#�����#�0�������)�#�������� ���������"� ��"�+���#"��������+���������"��#������#���#�#�������"�����#"���#�����"+"���"���#�����#����������
13. Item Availability (P41202)
;��#�"�����"�����#"���#�����"+��#�����"����+�#���-#���(��" �." "#�������72:$���9�#��#�#����#������������� ���+����������+����="#+���#�����*��"#������ �������������+����-+����� �����#�"�+"� ��. ��*��#���#������#���U������$���"����+�#���-#���(��" �." "#��������
A�"������#� �����#���-#���(��" �." "#���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������
Manufacturing and Distribution Planning
5–28 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing Shop Floor Workbench for MRP
(+#������*�����"����#�������+ ����������#���"���#���������������*�����"#���#�#���� �����������#"��� "����>����"��#������#���������������� �#��*����#���5�#�"� �)�@�"����#�2 ���"�������� ���� "��
���%��'��������'�� ��������,*�
1���#���5)2���" ������#"��������78 :$ 9�������������1 �����*.�����
$� �����*��"#������������ "�������� �#��#���+� ��"���+"� ��#�� ���#�#���.����0� ��#�+����"����������#�#���"� ���#�������+ ����*.����3
� 6����02 ��#
�� �����������������#�������"+"����*���������� �#��#���+� ��"��+"� ������� "�*�1"��3
� -#���D��.�
� 2 ����
� ��#���
� 2���#���
� 1����#�#�
� ���
� ������R')�+
Working with Material Requirements Plans
5–29OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� )��"���#���+� ��"���+"� �3
� E���#"#������
����� /&��������
2 ���� ���������.��*����.���+������������� �����
D�#�3�(�����"�����#"���+������+���� �������#�
��#������+�� #��� ���+��#�"�+"� ��.��������� ���+�
��#����������$�72���9��������� ��>����#����#�����+�� #
�� ������#�����+�� #�5���������������"��+���
(+#�������#����#�����+�� #��� �������#�������"��
��#"����#�����+�� #�"�+���#"����"� �����#���#"�� ����
������*�����#��#��������#��"+�#�����#���������
�"#�"���"���#��>��������"#��������#������"���#��
��+�� #��� ���
��#��� (����.��#��#�"���#"+"�������#��"��#���(����6��*
�#����;��#�"����.��#��"���#"+����� �����
��� "���#����#"�"���#����#�������� "���#����#���
���#"�������������#��������.��*����.��
2���#��� (����.��#��#�"���#"+"��#�������#���*������>������
���#�"����.��#�����#���+� ��"��3
� ��#����+�� #��� ���+��������*�����������������2"�"#����#�#�������5�����
� 8������*�����+����/��#��#���������#"��
1����#�#� ;����+"����������#�������#��������#��#����".��#��
#�#���+�����*������(���#�#���������+���%��#���%%
��#���#"�� ������#��#�����#������ �#���
������R')�+ (��� �������"���� �������������C�+�������
���������+���������.������"�� ���#�"�"�#��
��#�������.������ "�����.�����/�.����.��
E���#"#������ �����"�"�� �@���#"#��+��#���������#�" � "����� ���
�"��������������#��#��#�@���#"#����"���� �@���#"#"�
�"���������"������������������#����#��
Manufacturing and Distribution Planning
5–30 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Manufacturing Scheduling Workbench
Status/Item
1. Select Status Range or Item
From WO Status ____________ Thru WO Status ____________ Item Number ____________ Item Cross Reference ____________
Addresses
1. Select Planner and/or Customer
Address Number-Planner ____________ Address Number-Customer ____________
Categories
1. Select WO Categories
WO Type ____________ WO Priority ____________ Phase (Category 1) ____________ Category 2 ____________ Category 3 ____________
Document
1. Select WO Document Type
WO Document Type ____________
Versions
1. Note: Versions will default to ZJDE0001
Sales Order Inquiry Version ____________ Purchase Order Inquiry Version ____________ Work Order Completions Version ____________ Super Backflush Version ____________ Inventory Issues Version ____________ Work Order Entry Version ____________ Sales Order Entry Version ____________ Purchase Order Entry Version ____________ Work Order Parts List Version ____________ Work Order Routing Version ____________
Working with Material Requirements Plans
5–31OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing Leadtime for MRP
;��<���#"���-�@�"��#����"��� ���#"���+������������#���"����"��#�
���%��'�����������,*�
1���#���5)2���" ������#"��������78 :$ 9��������<���#"���-�@�"��
$� ���<���#"���-�@�"��C�5� #"�<��� �-����#�������� �#��#���+� ��"���+"� ������ "�*�1"���#�� ���#��#���"#���+����"����������#�#���"� ��� ���#"��3
� 6����
� -#���D��.�
�� )��"���#���"�+���#"���"��#���+� ��"���+"� �3
� <���
� 5���+��#�"��
� ���� �#"��
Processing Options for Bill of Material Inquiry
Defaults Tab
���������"�����#"������"+��#�����+�� #���#"���#��#�#����#������ "���"���#�������"�������"�@�"��������." ��+���#�"� �#����������"� ���@������
Manufacturing and Distribution Planning
5–32 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
1. Processing Mode
;��#�"�����"�����#"���#�����"+������#����#����"� ���#���"�+���#"�������"�������"�@�"���������+���#���+� ��"�������"�������3�"�� �"�@�"�����#����" �." "#����� ���#"���"�@�"��
����"�� ��"�@�"��������"� ���#�����������#��+���." ��+���#�"� �
������#����" �." "#��������"� ���#�����������#��+���." ��+���#�"� �����#�����" �. ��@���#"#"��+��#������������#��-+��������#�"����������"+����#����������#�#����#���#���.#��#��+�#��#��*�+���#���@���#"#����������������#���#���"� �������#"���@���#"#"���"���#�����+�#���#��*�����D���#"��-#�������"�����#"��������#����� ��#�#�.�
���� ���#"���"�@�"��������"� �����#�� ������� �� �#��� ���#"���+�����"#���(�#�� � ���#"��������"����+���#��� ���#"���������#���"��#���-#���6����#�. ��.��#���<���#"���)� ������������ �� �#��� ���#"������#������.���+����#��#�������#�#�#�#������+��#�������#��"��#��#�����#��#��#�#�������#�����"#��>����������#�"�������+�����"���#����+"��� ���#"���+�����"#����#�������#"���"�#��#"���#�����#���������#�����#�� ������� �� �#��� ���#"���-+��������#�"����������"+�����#����������#�#����#���#���"� ���#�����#�� ���� �� �#��� ���#"���"��#���<���#"���A� �������"�����#"��������#���� ��#�#�.�
A� "���� �����3
$ �����#����"� ���#���"�� ��"�@�"�������� �����#����"� ���#�����#����" �." "#������� �����#����"� ���#��� ���#"���"�@�"�������
-+����� �����#�"�����"�����#"���. ��*��#����#����"� ���#���"�� ��"�@�"������
2. Inquiry Mode
;��#�"�����"�����#"���#�����"+��#��� ��� ��+���#�" �#��#��������#�#���#���#���"� ��������"�� �� ��� �������"� ���#�������#�"#�������"#��������#�������� #" ��� �������"� ���#�������#�"#����"#���������#�����#����.���. "���+�#�����������#�������� #" ��� �"����#���������"� ��#�������#�"#����"#���������#������#����.���. "���+�#�����������#��-����"#"����"#�"����#�#����.���. "���A� "���� �����3
$ �����#����"� ���#���"�� �� ��� ������� �����#����"� ���#����� #" ��� ������ �����#����"� ���#����� #" ��� �"����#��������
-+����� �����#�"�����"�����#"���. ��*��#����#����"� ���#����� #" ��� "����#��������
Working with Material Requirements Plans
5–33OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3. Bill of Material Type
;��#�"�����"�����#"���#�����"+��#���#�����+�." ��+���#�"� �#��#�#����#�������#�����+�� #��� ���"��#���������+�6" �+"� �����#�����*��"#��6" ��+5�#�"� �+����6" ��+���#�"� �#����"��������+"���������7:�0�69�#��#��"���#��#���#�����+�." ��+���#�"� ����#��#���." ��+���#�"� �#����#������������"#�+���#����� ��#�;����+"��������+����-+����� �����#�"�����"����#"���. ��*��#����#������5�+������+��#�"���." ��+���#�"� �
4. Display Sequence
;��#�"�����"�����#"���#�����"+�������������#�#����#���#���#"�+���#"������#�����*��"#��6" ��+�5�#�"� �+����>�������������#��@������#�����#��.����������#� "������.����.������#"����@��������.���������������#� "������.��"��"��#��#����@�������+�#�����������#�����." ��+���#�"� ����������#"����@���������.��"��"��#��#����@�������+#���+�."��#"��������. ��#���"��#�������+��#����+����"#����A� "���� ����3
$ �����#����#�.����������#� "������.��� �����#����#�.������#"����@���������.��
-+����� �����#�"�����"�����#"���. ��*��#����#����#�#�����#��.���������#� "������.��
Versions Tab
���������"�����#"������"+����"�����"���#����#������+��#��+� ��"��������3�6" ��+�5�#�"� �2"�#��������*.����������F������6" ��+5�#�"� �)��""����-#���5�#���2����-�@�"�����*��"#��)��#"���5�#��-#���(��" �." "#���-#������)�+�����������-#���������
1. Bill of Material Print (R30460)
;��#�"�����"�����#"���#�����"+��#�����"����+�#���6" ��+�5�#�"� �2"�#���#�#��#�#����#�������-+����� �����#�"�����"�����#"���. ��*��#���#������#���U������$���"���
A�"������#� �����#���6" ��+�5�#�"� �2"�#����#��"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�������"+"����"���#����#����������
2. ECO Workbench (R30460)
;��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#���)����="#�#��#���������*.�����������+���#�����*��"#��6" �+�5�#�"� �+����-+����� �����#�"�����"�����#"���. ��*��#����#������#��U������$���"���
Manufacturing and Distribution Planning
5–34 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
A�"������#� �����#���������*.������������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�������"+"����"���#����#����������
3. ECO Header (P48020)
;��#�"�����"�����#"���#�����"+��#�����"����+�#�������F����������#��#�#����#���������������������#���1����="#�#��#���6" ��+�5�#�"� )��""���������+���#�����*��"#��6" ��+�5�#�"� ��-+����� �����#�"����"�����#"���. ��*��#����#������#���U������$���"���
A�"������#� �����#�������F������������"� ���"�+���#"��������+��������"��#������#���#�#�������"�����#"���#�������"+"����"���#�����#���������
4. Bill of Material Revisions (P3002)
;��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#���1����="#�#��#���6" ��+�5�#�"� �)��""���������+���#�����*�"#��6" ��+�5�#�"� �+����-+����� �����#�"�����"�����#"���. ��*��#����#�����#���U������$���"���
A�"������#� �����#���6" ��+�5�#�"� �)��""����������"� ��"�+���#"��������+���������"��#������#���#�#�������"�����#"���#������"+"����"���#�����#����������
5. Item Master (P4101B)
;��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#���1����="#�#��#���-#���5�#��������+���#�����*��"#��6" ��+��#�"� �+����-+����� �����#�"�����"�����#"���. ��*��#����#������#��U������$���"���
A�"������#� �����#���-#���5�#���������"� ���"�+���#"��������+��������"��#������#���#�#�������"�����#"���#�������"+"����"���#�����#���������
6. Process Inquiry (P30240)
;��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#���1����="#�#��#���2����-�@�"��������+���#�����*��"#��6" ��+5�#�"� �+����-+����� �����#�"�����"�����#"���. ��*��#����#������#��U������$���"���
A�"������#� �����#���2����-�@�"���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�������"+"����"���#����#����������
Working with Material Requirements Plans
5–35OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
7. Work With Routing Master (P3003)
;��#�"�����"�����#"���#�����"+��#�����"����+�#�����*��"#��)��#"��5�#��������#��#�#����#�������-+����� �����#�"�����"�����#"���. ��*�#����#������#���U������$���"���
A�"������#� �����#�����*��"#��)��#"���5�#���������"� ��"�+���#"��������+���������"��#������#���#�#�������"�����#"���#������"+"����"���#�����#����������
8. Item Availability (P41202)
;��#�"�����"�����#"���#�����"+��#�����"����+�#���-#���(��" �." "#�������#��#�#����#�������-+����� �����#�"�����"�����#"���. ��*��#���#������#���U������$���"���
A�"������#� �����#���-#���(��" �." "#���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�������"+"����"���#����#����������
9. Item Cross Reference
;��#�"�����"�����#"���#�����"+��#�����"����+�#���-#������)�+�����������#��#�#����#�������-+����� �����#�"�����"�����#"���. ��*��#���#������#���U������$���"���
A�"������#� �����#���-#������)�+�������������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�������"+"����"���#����#����������
10. Item Search
;��#�"�����"�����#"���#�����"+��#�����"����+�#���-#��������������#��#�#����#�������-+����� �����#�"�����"�����#"���. ��*��#����#�����#���U������$���"���
A�"������#� �����#���-#����������������"� ���"�+���#"��������+��������"��#������#���#�#�������"�����#"���#�������"+"����"���#�����#���������
Select Tab
���������"�����#"����"� ���#������" �." "#���+���#�+��#����+�#��#��*�����#"���@���#"#"������� ���#"����� ���
Manufacturing and Distribution Planning
5–36 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
1. Safety Stock
;��#�"�����"�����#"���#�����"+�����#���#����#����.#��#�#����+�#�#��*�+���#���@���#"#�����������;��#�"�����"�����#"���"�����/���#"����"#�#���2�#�(��" �." "#�������"��#���2���"���5��������"�����#"��������#����+�� #�#�.��A� "���� �����3
6 ��* �����#���������#��.#��#��+�#��#��*�+���#���@���#"#����������$ �����#����.#��#��+�#��#��*�+���#���@���#"#����������
2. Negative Quantities
;��#�"�����"�����#"���#�����"+�����#���#����#����"� �������#"�������#�+��#�����������#�@���#"#"���;��#�"�����"�����#"���"����/���#"����"#��#���2�#�(��" �." "#�������"��#���2���"���5��������"����#"��������#�����+�� #�#�.��A� "���� �����3
6 ��* �����#����"� ���� ������#�$ �����#����"� ����� ������#"��������#�
3. Leadtime Values
;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#�����#�� ���� �� �#��� ���#"����� ����;��#�"�����"�����#"���"�����/���#"����"#��#��<���#"���-�@�"�������"��#���2���"���5��������"�����#"��������#����+�� #�#�.��A� "���� �����3
6 ��* �����#����"� ���#�����#�� � ���#"����� ���+���#���-#���6�����#�. �71:$��9�
$ �����#����"� ���#����� �� �#��� ���#"����� ���
Process Tab
���������"�����#"������"+�����#���#����#���"�� �������=� �������#���"#���������"#����#�=#� "���������.���. "����"���"�@�"��( ������#��������"�����#"���#�����"+�����#���#����#������� "��#���������#�"#��M����#���#����#���"�� �������=� �����"�*�����������"� ��+���#����� �� �#"����+��=#������@���#"#�M��������#���#����#�������#�#�����=#� ��� ��+���������"#���
1. Phantom Items
;��#�"�����"�����#"���#�����"+�����#���#����#����=� ����#������#���#��#�����=#� ��� �������"#�#����"� ����+�#�������#����(�����#���"���� ����+"����+�����"���"���������+��#�"����������2���#���� �����������#��#��#�������������#�.�����. ����#��.���������"����." ��+
Working with Material Requirements Plans
5–37OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
��#�"� �#��#����������"��"���#���." ��+���#�"� �������������#�#���"� ���� ��#����.���. "�����������#�"� ��A� "���� �����3
6 ��* �����#�����"#�#�������#���"#���+���#���"�@�"�������"� ����� �#����.���. "�����������#�"� �
$ �����#���"�� ��������#���"#���"��#���"�@�"��
2. Process items
;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#�������"#����2����"#���"�� ����#�����������C�����#��.�C�����#�����"����"��#��(��"��#��." ��������#�"������������#�#��#�"���������+����������>������#�"�����"�����#"���������������."����"��#��������������+��#�"���#���"� ��������� �#��#��#����+�#����@�"����#��A� "��� �����3
6 ��* �����#����=� ���������"#���+���#���"�@�"��$ �����#���"�� ���������"#���"��#���"�@�"��
3. Text Lines
;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#���#�=#� "���A� "���� �����3
6 ��* �����#����=� ����#�=#� "���+���#���"�@�"��$ �����#���"�� ����#�=#� "���"��#���"�@�"��
4. Consolidate Component
;��#�"�����"�����#"���#�����"+�����#���#����#������� "��#����� "��#���������#������������������#�����.�� "#���"��#���." ��+���#�"� ����� #"�����"#�������"++���#��.���. "�������#��������.���. ���#��"++���#����#"����������������#�"�����"�����#"����"#��#�����.���. "�����"�����#"����#����#������� "��#����������#��#�#����.���. �� ��� ��+��� � ��� ��+�#���." ��+���#�"� ��������"��"���#������� "��#����������#��#���@���#"#���@�"���"������� �#���+����� "��#����������#�A� "���� �����3
6 ��* �����#����"� ���"��"�"��� �����������+���� "��#����������#�"�#���"�@�"��
$ �����#������� "��#����� "��#����������#�"��#���"�@�"��
Manufacturing and Distribution Planning
5–38 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5. Subassemblies
;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#���.���. "���(��.���. ��"�������. ��#��#�"������#����"���� ��� �#���*��������#������. ���A� "���� �����3
6 ��* �����#����=� �����.���. "��+���#���"�@�"��$ �����#���"�� �����.���. "��"��#���"�@�"��
6. Shrink
;��#�"�����"�����#"���#�����"+�����#���#����#�����/�#�#����@��#��@���#"#��+���"�*�������"�*����"�#���� ������ ���+�������#�"#���������.�+��#��������.��*�����#��+#����#�"��#"��������������#"����A� "���� �����3
6 ��* �����#���������#���/�#�#����@��#���@���#"#��$ �����#�����/�#�#����@��#���@���#"#��+���"�*����
7. Scrap
;��#�"�����"�����#"���#�����"+�����#���#����#�����/�#�#����=#�����@���#"#��+������������"�����. ����#�"� �#��#��� #�+���#��������#"��������-#�"���#�"� ���#"����+����"+"��#"��������+����������#�"#"��#��#���*�"�"����#"�� ��A� "���� �����3
6 ��* �����#���������#���/�#�#����=#������@���#"#��$ �����#�����/�#�#����=#������@���#"#��+������
8. Yield
;��#�"�����"�����#"���#�����"+�����#���#����#�����/�#�#����=#�����@���#"#��+���"� ���>"� ��"�#����#"���+���. ����#��#�+����������#��"#�"���#�A� "���� �����3
6 ��* �����#���������#���/�#�#����=#������@���#"#��$ �����#�����/�#�#����=#������@���#"#��+���"� ��
9. Purchased Items
;��#�"�����"�����#"���#�����"+�����#���#����#����=� ����#��#�����=# ��� ��+���������"#���"��#���." ��+���#�"� ����#��A� "���� �����3
6 ��* �����#����=� ���� ���C ��� ���������"#���+���#������#�$ �����#���"�� ���� ���C ��� ���������"#���"��#������#�
5–39OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Validating Material Requirements Plans
(+#�����������#��#�����#�"� ��@�"����#�� ����������#��� "��#��"#�#������#��#�����������++"�"��#���*����#�������"#���;�������"#�)�@�"����#�2 ���"���7�)29�#����#��"������#���#�����#�"� �� �������.��=���#����"#��#������" �. �������������0������������������.���� ����������
Manufacturing and Distribution Planning
5–40 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5–41OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Orders for MRP
1���#�����" ������2����#"���C��"��#�������78 $$$9�����������2���"���
(+#���������5)2�)������#"�����5)2�D�#������������#�������2���"��.�#���������#��������� #"� ����*�����������#��3
� (##�����#�����#� "#
� (##�����#�����#"���"�#��#"��
� ��#����"�"#"� �����#�#�
� 8����#��#����������*�#��"�� ��"��3
� 2�#� "#
� )��#"���"�#��#"��
� ��������*�#������
� ��������#���#���
����������#��#��������#�����������+��5)2�"�#�������������#��#�������#�����������+���"#".�#"���)�@�"����#�2 ���"����5�#�2����#"��������� �������)�������#������"#��2 ���"���
See Also
� ����������!��"(������������'���������"��#���'���*��������� ��������
Manufacturing and Distribution Planning
5–42 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Manufacturing and DistributionEnvironments
Manufacturing and Distribution Planning
5–44 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Manufacturing and Distribution Environments
�����H���#���C�"��������+��#�"���#�#��"���@�"��+ �=". ������+��#�"�������"#".�#"����#���
5���+��#�"��������"#".�#"������"�����#����"#��+�#���+� ��"���#�*3
� ��*"����"#��.�#���� ���"��
� ��*"����"#�������� ���"��
� ��*"����"#�����#"#"���� ���"��
����+� ��"�������"����������+��#�"��������"#".�#"������"�����#�#��#����� ���������#"�����+����"��#��� ��C�� ���������#"����+���#��"G����"���#���������"��C�� ���������#"����+�������"#"��
Variety
Job Shop
Batch
Line
Continuous
Volume
1
2
3
4
������"������#��������#�����+��#�����������"��#����#�����#�����+��#�"��������"#".�#"������"�����#�� ����#����"����� ��+�#�������������#"#"��������#�������������������������������������������#��#��"��#�7#��#�"������+��#��������� ����� �����"#��������"�#�9�
Manufacturing and Distribution Planning
6–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����#"�������������������"���������#"#"��������#����.�����#"�����"=��C���������+��#�"������"�����#��-���"=��������������"��C�� ��������#����������"��C��"�#�������#����������"#�"��#���������������.�#�"���"++���#�����+��#�"��������"#".�#"������"�����#�
����5���+��#�"��������"#".�#"���2 ���"����#��H��������#�.������"���"=��C���������." "#���5���+��#�"��������"#".�#"���2 ���"������"�� #����� ����������"��#��"#���+����/�.�������#�C.����"#���+����+ ��������������#"�����"#���+���������"���#��
����������������"#".�#"����#�����*�#���#����"#��#�������+��#�"���#���#�������#��#�#���"��#�"#���"�"��#���"��#�� �����#�#���"��#�#"���#����#���#���������������� ���������������������#���#�.� �����#������#��#�#�"�����������1���=��� ���#���-����#���5��������#��#������#���+� ��"��3�
� �#���"#���"�+���#"���+��#�������+��#�"����#��
� �#���� �����������"�����#�����@���#"#"�����" �. ��.�� ���#"��
� ���*�"#�������� ��+�� ���#"���+�����"���������� ����#��
� ;���#��#���"����#���������#�.� �����"��#�������� � ������"#������������"��"����#����� ��#"��������#���"���������������#
�"��#������+��#�"������." ��+���#�"� �������#"��������." ��+���#�"� ���#�"��"��"�"��� ���#�����������#������������#��.� #���"�������� �#"�����#� ���#��+���+"=�������"�. ��@���#"#���2����#����+�#����"�"����"�#��.���. "��#��#��������"����"��� �������. "��
���"�� ��=��� ���+������#��+��"��#������+��#�"�����3
� ��
� 1��"#��
� � ��#��"�
� ("� ���
�"��#������+��#�"���"���� ��+�#��������#�"G���.��#�������+��#�"��#�#��������������3
� 5�*�C#�C#��*���"����"#������"�� �����#"#"��������������.����#��
� (����+�#���K#�C����L���������*�C#�C��������. �C#�C���������"���C#�C���
� ����K���C�++L���/�.��������"�����#
E���-�-+���������+��#��������#��"������+"���#"����5)2�������#������"G����+"��������#"�����"++������+�������+"�����"#������!��"���#�������������'�����)������"��#��'���������������������+
6–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Working with Batch Planning
�"#��.�#�������+��#�"�����������#�"������+�����." ��+���#�"� �"���#����������� �#�"G������� �#�"G��"���#��"����.����� �"G����#�������� ���#������"�� ������#�#��#����.�#�������+��#�"���"�� ���3
� 2�������#"��
� 1���
� 8 ��
� 1����#���.������
� 2�"�#
�����./��#"���+��.�#�������+��#�"���"�#���������*������"#����.�#��@���#"#��#��#���������#����.�#���." ��+���#�"� �����#�����#��������+�5)2�����"������#���#���." �#������"@�� ����+"�����." ��+���#�"� ������������#���.�#���@���#"#���"#��." �#����#��+�#�����+"�������"@���." �
�"#��#�"�����+��#�"�����#����������#"�#"�����������"#����#��"���#��"G���+�#���.�#������������1���=��� ��������"��#������#��+" �#�����#�#�����#�"�� ��� �+��#��������#����+������� ��
-�����"#"����#����#������"+"�� ����+"���#�����������#�@���#"#"��+��#��.�#����1���=��� �����4�C�� �����#��@�"�����"����@���#"#���+������������#��.�#�#����#���������#������" �����. ��#�����������#�+���$��C�� �����#���������������#�����+#�����G��������#� �#�
A�#�����+#������"�� �� ���#���� ���#�����������#"#"�������#���������1���=��� ���"��#�������+��#����+�.�����������"��"=������� �+#�#��"��"�����#�.�+���+�����"�#��"��"�"��� � �����������#�+��.�*"����������*��"���
>����+#����=�����"#��+�������+��.�#����"��#����+��� ��������"��#������� "#����*" �����
(+#���������#����.�#���." ��+���#�"� �����.�#�����#"���+��#�����*��������������������#���.�#�����*�����#���##����#�����#� "#�������#"��"�#��#"���#��#�����*��������������������������#������#������� ���+.�#�����*�����������"���#�����#��#�
Manufacturing and Distribution Planning
6–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
��*"����"#��.�#���� ���"������"#��+�#���+� ��"���#�*3
� )��"��"���.�#���." ��+���#�"�
� 8����#"���52��+��.�#���."
� )��"��"���.�#�����#��#�+���52��7��#"��� 9
See Also
� !��"���#����������������������"��#����������&�������� ���������+������"�+���#"����.��#�.�#�����#"��
Reviewing Batch Bills of Material
>������.�#���." ��+���#�"� �#�����������#�����"�� ����#�"�#��1��=��� �������"���#"���������#�����������#"�� ���+����"���#"��������������#�#����*�������#�"��+"=���@���#"#"����.�#�����>���������#���������."��#"����+�.�#���"G������." �#�����
Before You Begin
� ��#�#��������"�#������"�����#"���#���"� ���#���6�#���E���#"#��+"� ��
Working with Batch Planning
6–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���������������������������
1���#�����" ��2�5��"��#�������78 �$$9���������#�0�������6" +
$� �����*��"#��6" ��+�5�#�"� ������ �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���." ��+���#�"� 3
� -#���D��.�
� 6����02 ��#
� ������+�6"
�� )��"���#���+� ��"���+"� �3
� ;�5
� 6�#���E#�
� ������+�6"
Manufacturing and Distribution Planning
6–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
������+�6" (������+"���������7:�0�69�#��#���"���#��#���#�����+
." ��+���#�"� ��>���������+"����"++���#�#�����+�." ��+
��#�"� �+���"++���#�����1���=��� �3
5 �#����������+��#�"���."
)�T )���*�."
�2) �������#�."
�����#�����#��." �#����5�"��#�����*����������
������������#������*�������� ���������"+�
���#���." �#����������#�������#���." �#�����������
#�����*�����������#��*������"���." ��+���#�"� �#�
���#�����#��#�����*�������#� "#��5)2����#���."
#���������#��"���#"+��#���." ��+���#�"� �#����������"#
�##�����5)2��������6�#���." ��+���#�"� ���#�.�
#����5�+������+ ������������#�������#���#"�������
5)2�����"���
6�#���E#� ����@���#"#���+�+"�"������"#�#��#������=���#�#�"�." ��+
��#�"� �����#"���#����������>����������"+�����"��
@���#"#"���+���������#�.�������#��������#��+
+"�"������������������1���=��� ���$��������+
� ���#�"��@�"��������"#����#��$�����"#��+�+"�"���
�����#��F�������"+�������"#��+�+"�"���������#�"
������������������+�� ���#�����@�"������+"�"���
��"#��-��#�"��=��� ���������� ���#����.�#���@���#"#"�
+��$�������������"#��+�+"�"���������#�����"+�"���#��
����������#��+�� ���#������"#�
See Also
� !��"���#������������������"��#����������&�������� ���������+�����"�+���#"����.��#�.�#���." ��+���#�"�
Processing Options for Bill of Material Revisions
Defaults
1. Component Branch ____________
Blank = The system uses component branch when copy BOM. 1 = The system uses parent branch when copy BOM.
2. Bill of Material Type ____________
Blank = The system uses M for manufacturing bill of material.
Working with Batch Planning
6–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3. As of Date ____________
Blank = The system uses all dates. 1 = The system uses the current date.
4. Display Sequence ____________
Blank = The system sequences by component line number. 1 = The system sequences by component line Number. 2 = The system sequences by operation sequence number.
Display
1. Bill Type ____________
Blank = The system does not display the Bill Type field. 1 = The system displays the Bill Type field.
2. Batch Quantity ____________
Blank = The system does not display the Batch Quantity field. 1 = The system displays the Batch Quantity field.
Versions
Enter the version for each program. If left blank, version ZJDE0001 will be used.
1. Single Level BOM Print ____________ (R30460) 2. Multi Level BOM Print (R30460) ____________ 3. ECO Workbench (P30225) ____________ 4. Component Maintenance (P3015) ____________ 5. ECO Header [P30BREV] ____________ 6. Bill of Material Where Used ____________ (P30201) 7. Item Master (P4101B) ____________ 8. Co/By- Products Inquiry ____________ (P30211) 9. Bill of Material Inquiry ____________ (P30200)
Edit
1. Item Branch Validation ____________
Blank = The system does not check to see if the item branch is valid. 1 = The system checks for a valid item branch record.
Manufacturing and Distribution Planning
6–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Interop
1. Transaction Type ____________
Blank = The system does not perform outbound interoperability processing. JDEBOM = The system performs outbound interoperability processing.
2. Write Image for a Change ____________ Transaction
Blank = The system stores the after image from F3002 to F3002Z1 1 = The system stores the before image from F3002 to F3002Z1
3. Interoperability Outbound ____________ (R00460)
Blank = Ths system uses the ZJDE0001 version of R00460.
Generating MPS for Batch Bills
1���#���'"�� ���"#��2�"��"��2 ���"�������#"��������78 :��9��������52�)������#"���
;��52��)������#"���#�������#������#������� ��+��� �"#�����+��� ��#��"#������"�������+���#"����"++���# ��������"���������#�������#�������.�#���." ��="#�
-+��� ������.�#���." ��="#��52�����#���.�#���@���#"#����+� ��3
� (����� #"� ���"+�#�����#��@�"����#�������#��#����#���.�#���@���#"#�
� (����"�"�����"+�#�����#��@�"����#���� ��#����#���.�#���@���#"#�
-���"#��������#��������������#��������#��� ����������+�������.�#��@���#"#��
1���=��� �3
6�#���E���#"#� 52��)�@�"����# )�� #"���52��2 ��������
$��� $4�� $���
$���
$��� %&! $���
Working with Batch Planning
6–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
-+�����.�#���." �"����#��#����� ��+�#���.�#���@���#"#"���#������������#�� ���#�.�#���@���#"#��"�����."��#"����"#�������+�#����#���@���#"#"��#����#�����#� ���#"+��#����@�"����#�
1���=��� �3
6�#���E���#"#� 52��)�@�"����# )�� #"���52��2 ��������
:��
&��
���
$���
$4�� $���
&��
:��
&��
���
$���
��� $���
$���
$���
-+��� #"� ��.�#���." ��="#�����#�����#��@�"����#�"� ��#����#��� ���#�.�#��@���#"#���#������������#�����=#��"���#�.�#���@���#"#��#���#"+��#���@�"����#�
1���=��� �3
6�#���E���#"#� 52��)�@�"����# )�� #"���52��2 ��������
:��
&��
���
$���
!�� ���
>������������"��#���������� �#����#���+����� � �����"����-��#����� � �����"�����#�����#����#���� �������#��������"#��"�� #����� ��.���"����� #"� �����������"���#����#�*��� �����������#����=���#����.�#������������������#��#��������#��������������������� � �����"�����#�������"����"��"+"���#���+���������"�����"��
��� "�"#����� ��.��#������.���+�������#��#�������" �. �������������
�����#������#��������#���.�#�����"���#�������� � �����"����-�#�"���"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������#��#�#����#������#���=���#��#����.�#�����"���
See Also
� �������������������������������
� ����������'�����,$���������'��������+��#�������"�����#"���+�#�"������
Manufacturing and Distribution Planning
6–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing Batch Output from MPS
(+#�����������#������#������� ������52���"�����"��-�@�"������52���#�" �5�����)��"���#����"���#���#"����"������������+���#���52������#"����
����#"����"��"���������+�#"��C��������� ���������������##"���+�� ��#���"#���������������+ ��#�����#����#������.�#����#�������#�����@���#"#"��+����#��@�"����#�+�������#"�����"���
)��"��"���.�#�����#��#����"#��+�#���+� ��"��3
� )��"��"���#���#"����"��+��.�#�����#��#
� )��"��"�����#"���������+��.�#�����#��#
See Also
� �����#������2� �'�����+������"�+���#"����.��#��"�����"��-�@�"������+��#�������"�����#"��
� !��"���#����������+��#�������"�����#"���+��52����#�" �5����)��"��
���%��'��������������������������
1���#���52����" ������#"��������78 :$�9��������52���"�����"�0(�2-�@�"�+
Working with Batch Planning
6–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
$� �����*��"#���"�����"������� �#��#���+� ��"���+"� ��#�� ���#��#��#"����"��+������"#��3
� 6����02 ��#
� -#���D��.�
�� ��������#���@���#"#��#����#��#���������@���#"#��"��#���#"����"��� "�*�#���+� ��"�����#"�������#����� "�*�1"��3
� ������6 ��*�<"��
���%��'���������������������������
1���#���52����" ������#"��������78 :$�9��������52����#�" �5����)��"��+
�����*��"#����#�" �5���������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���������+������"#��3
� �������6����
� -#���D��.�
Manufacturing and Distribution Planning
6–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Working with Process Planning
2��������+��#�"����� #�"�������#������� "@�"���+".����������������2�������#"�� ��+���#�++������.����������#��"�� ��=��� ���+����������#��2����#�������#���������� ������+��#����.���#��C#�������3
� 5"="�����. ���"��
� 1" "��������*��"��
�����*"����+������#��"��#�"��� ���"�#����"�#��#������������"���.�*"�����������#"���
2��������+��#�"������"����"��#�����." ��+���#�"� ��-����"��#�����.��"#�����������������������"���#�������+��#�"���������-��������." ��+���#�"� ��#���@���#"#���+�����������#��������������"���#��"#���������#�����
;�"@���+��#����+����������+��#�"�����3
� 2��"�����C�����#
� 2 ��������C�����#�7.�C�����#������� �����9
� (��"#"��� �����"�����#"���"��52�05)2
2��������+��#�"������������C�����#�����.�C�����#��(���C�����#�"��� ��. ������"#���#��#��� #�+�����������(�.�C�����#�"�����#�"� ��+��� ��#��#�"���������"��"���#� �#���������"��� ��+�#��������
�����"++���#�#�����+����������+��#�"�����3
� 6�#��
� ���#"����
-��.�#�������"����������� ����������������#�"����#����������� �#�"G���#��"����.����� �"G��� "����#�����#��������� ���#���6�������+�#��� "+���� ���+�#��������#��+#��"#����� �#"��������#��"�� ������� ��"#��������#�"����"����#������#"���������C�����#�����.�C�����#�����.�������#����"���.�#�������"�������"�� �"#������������"#��.�#�������"���"�� ���3
� 2�������#"��
� 1���
Manufacturing and Distribution Planning
6–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� -�*�������"�#
� 8 ��
� �" �������"�� ������#
-��#������#"�����+ ������"�����#�������#"������#��"�� �����#"����+�����=#���������#"�����@�"����#�"����"��#���#�����������#��������#� "������"��#�����+�����+��#�"���"������#�"G���.���"++"�� #��"����#��"�����#��#�� �����"#����������������"����"� ��+������������#"�����=��� ������#� ���C.���������#�������#����"+"��#"������C�����#�����.�C�����#�������� ���������� ��#�"�����#"���������"���#����"��.�#�������"���
52���� �� �#��#���#"����"��+����C�����#���������+��#�����C�����#�����#��52������������#���"���#��������#"�����������C�����#�#��#���+� ���#"+"���.��#�������������#����"��������������2������"��#� ����*����.�C�����#�#��#������ ����.�#�"���#�#������#� ��������+�#��������1���=��� ���#��� �."���#�����������C�����#��+������� � �."���#���������"#�� �."���#��������.�C�����#��+� ���������� �."���#��� ����#�.����������"��" ��#���.#�"�� �����
;�� ���.�#��.�#����������#"���������"�����#�����@�"���=#��"�������*���"��������������"���@�� "#������#� �������� �����"���#������������#"�#����������#�� �#�#��"�������#��*"���
���"���#"+�����"#���+�����������+��#�"����������#���+"���#���"#��H#��*"���#����#���"#"���"��"#�+�����C�����#����"��#��"#����>�����#�#������"+��.�#��#��������#�����+�#����������+����C�����#�#��#�"��#"+"���+���������*���������#��������#����#��#�"��#"+"���+����#����������������*�����+��#�����C�����#��>�������#���������#��������"������#������� ���+�� ��������*�����������#��#����"���#��#����"#��+#"����"������������+��#�����C�����#�����.�C�����#�
��*"����"#�������� ���"������"#��+�#���+� ��"���#�*3
� 8����#"���52��+��#��������"���#�
� )��"��"����������#��#�+���52�������#"��
Before You Begin
� ��#����#���#��*"���#����+��� �"#��������&�������'���"���2�����������������
� ��#����#�����C�����.�C�����#������&���������,�������������,���������
Working with Process Planning
6–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Generating MPS for the Process Industry
1���#����"�� ���"#��2�"��"��2 ���"�������#"��������78 :��9��������52�)������#"��+
���������������52��)������#"����#����#��3
� ��� ��#��� ��#���"�+���#"��
� 2�+����� �� �#"��
� 8����#����#"����"������������+��#���� ��#���"#��
>������������"��#���������� �#����#���+����� � �����"����-��#����� � �����"�����#�����#����#���� �������#��������"#��"�� #����� ��.���"����� #"� �����������"���#����#�*��� �����������#����=���#����.�#������������������#��#��������#��������������������� � �����"�����#�������"����"��"+"���#���+���������"�����"��
��� "�"#����� ��.��#������.���+�������#��#�������" �. �������������
�����#������#��������#���.�#�����"���#�������� � �����"����-�#�"���"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������������#������#����������#���=���#��#���.�#�����"���
See Also
� �������������������������������
� ����������������'����������'���������� �
Reviewing Process Output from MPS Generation
(+#�����������#������#������� ������52���"�����"��-�@�"������52���#�" �5�����)��"���#����"���#���#"����"������������#��#�#����#�������#���
5������������������� #"� ����C�����#��-�������#"�����"������"�������C�����#����#������#���������"�#������"�����C�����#��1���=��� ����������"��#��������.�#��� �#"�������#�� ����� ��� �7��#"C+��G�9��-+�#����"���#���������+��� �#"��"����#"�����"����#����#���� ���+��#�������.�������#����������+��� �#"�����"����"��#��� #�"���=�����#"+��G������#"���
����#"����"��"���������+�#"��C��������� ���������������##"���+�� ��#�����C�����.�C�����#����C�����#�#��#����+� ���#"+"���.��#������������#����"��������������-�#�����#����#������#�����"��������+����C�����#�#��#����� ������.���������
Manufacturing and Distribution Planning
6–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
E���3�2����"#������.�������#��������#"����"��
)��"��"����������#��#�+���#���52�������#"���"�� ����#���+� ��"���#�*3
� )��"��"���#"����"��+����C�����#�����.�C�����#
� )��"��"���������+�������
���%��'������������������������������������
1���#���52����" ������#"��������78 :$�9��������52���"�����"�0(�2-�@�"��
$� �����*��"#���"�����"������� �#��#���+� ��"���+"� ��#�� ���#��#��#"����"��+������C�����#���.�C�����#3
� 6����02 ��#
� -#���D��.�
�� ��������#���@���#"#��#����#��#�����������#��"��#���#"����"���� "�*#���+� ��"�����#"�������#����� "�*�1"��3
� ������6 ��*�<"��
Working with Process Planning
6–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%��'�������������������
1���#���52����" ������#"��������78 :$�9�������52����#�" �5����)��"��+
�����*��"#����#�" �5���������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���������+���������"#��3
� �������6����
� -#���D��.�
E���3���C�����#�#��#����+� ���#"+"���.��#�������������#����"������������
See Also
� !��"���#���&�� �'(�����
Manufacturing and Distribution Planning
6–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Working with Repetitive Planning
;�����#"#"�������+��#�"���+���"�� �����#"#"��������#"���#��#�� "�����������#"����#���)���#"#"�������+��#�"������. ������#�����"+�����#������� �.���++��#"�����#��"����" ������* ��������#� ��@���#"#"��
)���#"#"�������+��#�"������#���+� ��"��������#�"#"�3
� 2����#"����� ����"�#�. ���������"�#�. ��
� <���#"���"���#�
� 1��#��� ����#�"������#C�"��#��������+#��������#�"G�����K�� � �����+��#�"��L�"����"����""�" ������#"���������"�� ����������#��#�#��������#�+ �����"� ��+�����������#"���#��#�����=#�
� ��#��������#���#��#��"#��"���.�#����������#�������#�"��"+"���# ��++��#�#���#"������" �. ��+�������#"���
� 8����#����� ����"��+#���"������#���"�#��#�����"������"���"����������+��#�"������"���"���#�����������#��������"�#���"#�� "## ���++��#�����#��������#"��������
� ;�"#��+�������"��+#���K�����L�F�������"#������ ��.���� ���C����"��#C� �#��������"#�"�����"��������"�����#�#��#�"�"�" ��#����������+��#�"���7���������#���"��#�9�
�=��� ���+����#"#"��������#���3
� � ��#��"������
� (�#���." �
� ���. ��������������7���"�������"�����+"���#�����������9
���� ���+����#"#"��"#�������3
� -���#"+��#���"#��������#�C����� ���"#���+�������"+"��.����0� ��#
� ���#������#"���+��#���"#��
� (##����#����#�C����� ���"#���#���� "��
(+#�������#����#�������"���+�����#"#"���"#�����������������#������#������ ��������"���#�����#��#����"���#��#����"#��+�#"����"������������>�������#������ "��#��#��� ������� "������� �.���"��"���#����++��#�+����#������� ��������"������*����#��������/�#"���#����"�"#"���+�#������� ��
Manufacturing and Distribution Planning
6–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
��*"����"#�����#"#"�������+��#�"������"#��+�#���+� ��"���#�*3
� 8����#"���52��+�����#"#"���"#��
� )��"��"������#"#"�����#��#�+���52�
� )��"��"����#������� �� ���
Before You Begin
� -���#"+��#����������"�#�+�����#"#"���"#��������&�������(�����������
� �����#��#�� ���#"�������#���������0���������������������������
� �����#��#�� ������#"��� "������"���#"+"����������������$��������� ��������������
� �����#��#�� ��#������� ������#���������0������������'���������
Generating MPS for Repetitive Items
1���#����"�� ���"#��2�"��"��2 ���"�������#"��������78 :��9��������52�)������#"���
������������#���52��D�#����������)������#"����������#����#��3
� ��� ��#��� ��#���"�+���#"��
� 2�+����� �� �#"��
� 8����#����#"����"������������+��#���� ��#���"#��
��������#��52��+�����#"#"���"#��3
� ��#�#�������"�����#"���#�������#��#�����#�������#"�������� ��
� ��#��#���#�����+�#������� ��#��#��������#�#�����+������"���
� ��#�#��������"�#������"�����#"���#���=#�����#����/�#���#�#� ���C ��� �"#���
>������������"��#���������� �#����#���+����� � �����"����-��#����� � �����"�����#�����#����#���� �������#��������"#���"�� #����� �.���"����� #"� �����������"���#����#�*��� ������������#����=���#���.�#������������������#��#��������#���������������������� � ����"�����#�������"����"��"+"���#���+���������"�����"������ "�"#���� ��.��#������.���+�������#��#�������" �. �������������
Working with Repetitive Planning
6–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����#������#������#���.�#�����"���#�������� � �����"����-��#�"��"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������������#������#����������#���=���#��#���.�#�����"���
See Also
� �������������������������������
� ����������������'���������������� �
� ����������������'����������'���������� �
Reviewing Repetitive Output from MPS
(+#�����������#������#�������#"�������� ������52���"�����"��-�@�"�����52����#�" �5�����)��"���#����"���#���#"����"������������#��#�#���#�����������#���
����#"����"��"���������+�#"��C��������� ���������������##"���+�� ��#���"#���������#��� "�*�#���� ����������� ����+��#�������#�"#��#��#�������@�"����#��+���������#�"#���
-+�����������#�������#������"#������#������� ���#����#������ "��#���������+���#�������#�"#���������������+���#����#�C����� �������#+� ���#������� ��"������� ����*����A���������#������� ��"������+������������#��+����#�C.��������#��#����� �� �#"���"�� ����#���"�+���#"��+��#�����������#�"��.�#��#����#������� ��7O)�9���������/�#����#������� �7O)�;9���#�� "����������������#�"������������� ���������� ��5)2� ��"���� "��
Manufacturing and Distribution Planning
6–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����������+ ��#�����#����#�������#�C����� ���"#���#�������#�@���#"#"��+����#��@�"����#�+�������#"�����"��������52�05)2�������������#���+� ��"���#������"����#"���������#��#���#�"��#�����#"#"��"#��3
�>�������������� ;���#������="#"����#��#��#���"�������@���#"#��
�>$������������� ;���#������="#"����#��#��#�����������@���#"#��
E>���������� ���#����������������+���#���52�05)2���#�"
5�����)��"���+����>����������������#�������
�������#���#"���
-�#�����+����#"�����"�� ���#��+�����"��������� �
��"���#������������#��������#����#������#�����"�
�+��#��#�������#�����#"����"����1��"�#������"�#�����+
���"����������* ���#��"���++��#�+��+������*��#��
�#������#��+������* ���#��������"���++��#�+���
���*�
�������������������#��)�#���������#����#������
�##����#�����#� "#�������#"�����#���#"�� ��
�����#����#���������������#������#���#��7-�����F������9��"#������#�����*�#����� "�"#���+�#�����#�����"���������52�05)2�������#"����������������"#���� "����#���F����������������������#������#�.�+�������"���#����������������"������#"���"��� "���#��������#���� "�"#���+�#�����#��#��#�������#�����������������������������#��.�+������"���
)��"��"������#"#"����#�C����� �����#��#����"#��+�#���+� ��"���#�*3
� )��"��"���#���#"����"��+���#�C����� �����#��#
� )��"��"�����#"���������+���#�C����� �����#��#
Working with Repetitive Planning
6–23OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%��'�����������������������������������
1���#���52����" ������#"��������78 :$�9��������52���"�����"�0(�2-�@�"��
�����*��"#���"�����"������� �#��#���+� ��"���+"� ������� "�*�1"���#� ���#��#���#"����"��+������"#��3�
� 6����02 ��#
� -#���D��.�
Manufacturing and Distribution Planning
6–24 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%��'������������������������������������
1���#���52����" ������#"��������78 :$�9��������52����#�" �5����)��"���
�����*��"#����#�" �5���������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���������+������"#��3�
� -#���D��.�
� �������6����
See Also
� !��"���#���&�� �'(�����
Reviewing Rate Schedule Loads
;�������� ��)��"���#����"���#����#������� �� ��������#�����*����� ���+������*����#��+������������*�������#���>�������� ��� ��#������"+"����#������+����"���#���"���#��� ����+��#�����*����#���-+����������#����/�#�#������� ��� �����#�#�����*����#�������������������� �+���#����*���/�#���#��
������ ��)��"���"������"��" ��+���#�C.����"#�������"����� #���#"���+��"��"���#��� �����������*����#���(�����"�����#"���� �������#��"�� �����*����C�����#��� ����.�+������+#���#�� ����
Working with Repetitive Planning
6–25OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
See Also
� �����#�������'����������!��"������$����
Manufacturing and Distribution Planning
6–26 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Material and Capacity Planning Setup
Manufacturing and Distribution Planning
6–28 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
7–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Material and Capacity Planning Setup
>�����#����� �#���#���#�*��"��#���"���#�����#�"� ����������"#��� ���"���#������#���"�� ��������#�*�����#�"��������+"����������"#��"�+���#"��������#���� ��+��#���� ���"����#���
��##"��������#�"� ����������"#��� ���"������"#��+3
� ;���#���"���;���+��5���+��#�"��������"#".�#"���2 ���"��
� ��##"������#���� ���"����#��
Manufacturing and Distribution Planning
7–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
7–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Understanding UDCs for Manufacturing and DistributionPlanning
5����+"� ��#�������#�#���� ���"����#��������#��� �������+"��������7;��9��>��������#����+"���#���������.�+��������������#���� ���"���������1���=��� ���.�+������������#�����������@�"����#�� ���������#���+"���#���"�+���#"���#��#�#����#������#��� ��#������"� �����#��
;������#����"��#�. ��.���#������������#�����1���=��� �3
� 0;�������#�#����)2��#������������+"���������;�"#�����
� ��#��� :��#�����1�7 :0�19������#�#����)205)2052���#�����������+"����������"���1����
����#����;���+��#���� ���"����#����������#�"���#"+��� �#��������������#�#��������#���;����+"���������+����-+�������#���������#"���#�#������������#���+���#��#������"����#�"���#"+�����������#"���#�#���������#���;����+"���������+����#����#����"� ����������������1��=��� ������������� ����#�������"��#�������#"���#�#�������+"� ��#��#��="#"��#���;���#�. ��+���#��� $�����#�������
>������������� ������#��������"�� ��;���+����(+#������� ��#���;��+���+������������������#����#�����������������+"���������#����+"� ��#���������#���;���#�. ��������#���#��������+"���������"��#���;���+"���������#�. ��71���49�
����+� ��"���;�������"����#�������"#������������� ���"��3
� �����"#��)�@�"����#��"� ���7 0�)9
� )�������#������"#���"� ���7 0)�9
� )������)�@�"����#�7 0))9
� ;�"#������7 0;�9
����+� ��"���;�������"����#���)2��5)2������52�3
� 5����������7 :05�9
� �"���1�����)� ��7 :0�19
Manufacturing and Distribution Planning
7–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
See Also
� ����� �/�������&������������"��#���(��!����*���������������+���#�" ���"�+���#"����.��#������+"��������
Capacity Requirements Display (33/CR)
�����#������ 0�)���#��������+"���������+��#��������"#��)�@�"����#�"� ����;��#��������"#���@�"����#��"� ���#�����"+��������"�#"���+�� ��)2�+����������#��
Rough Cut Capacity Display (33/RC)
�����#������ 0)����#��������+"���������+��#���)�������#������"#��"� ����;��)�������#������"#���"� ���#�����"+��������"�#"���+��)��2+����������#��
Resource Requirements (33/RR)
�����#������ 0))���#��������+"���������+���������@�"����#������������@�"����#��"� ���"���#"+"��#���#�����+� �����������*����#��>���������"���#�������#���)��"�����*����#��<����+����
Unit Types (33/UT)
�����#������ 0;����#��������+"���������+����"#�#�����>��������#�"���#"+��� �#����"++���#�#�����+���������"#�#��#�����.�����"�#����"#�������*����#���
Message Types for DRP, MPS, MRP, and RCCP (34/MT)
�����#������ :05����#��������+"���������+��������#�����( �#���������������+"����+��#����������#��#�#����#����"� ����������������#���)2��52�������������6������#��������#�������"��������������������������#������"�#"���.�#���#�#���+���#"����+�#���������#����
Understanding UDCs for Manufacturing and Distribution Planning
7–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Time Fence Rules for DRP, MRP, and MPS (34/TF)
�"���+����������"�#��+�#"����#���"�������������*���������#���"#����� "��������#"�����������������#������ :0�1���#��������+"���������+�#"���+������ ��������#�������#�#����#"���+����3�
����(��������� �"#�"��#�"�#"�����"�������������"#������#�����
�� ������
���������������� �"#�"��#�"�#"�����"����#����#�������������+���#��
+����#�������#��������#���� �� �#�����"������" �. �
�����#�
,������$����������
�$�
(+#��#�"�#"�����"���������������"#������#�����
�"� �����
Manufacturing and Distribution Planning
7–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
7–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Setting Up the Planning Systems
>�����#���+"���#���"�+���#"���#��#�#����#�����������"#����#���� ���"����������� "���������������#�������#���"�+���#"���#����#��"������#��� ��#������"� �����#���>�����#��#���������+�#�"�"�+���#"���"���#���#����������#���-����#���5��������#�7�#���:$9��2����#���#�5��������#�7�#��� �9�����������1 ���5��������#�7�#��� $9��
����#����#���� ���"����#�������� �#��#���+� ��"���#�*3
� ��#������� �������������"�� �"���� �
� ��#����+����#�������#"�����"���7��#"��� 9
� ��#���������� "���� �
� ��#����#��*"���#���
� ��+"���#���#��*"���#����+�������
� ��+"�����C�����#�����.�C�����#
� ��+"�"��������� "��
� A�"+�"������#"#"�����#"��
� ���#"��� "�������"#���� �#"���"�
� A�"+�"����#������� �
Setting Up Supply and Demand Inclusion Rules
>����#������� �������������"�� �"���� ��#���"���#������ ������������+�����"#��������������+�#����@���#"#"��"����� ��������������@��#"�������+� ��3�
-��������%������ E���#"#���������
�������������� �����@���#"#���������������
Manufacturing and Distribution Planning
7–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
,������������'��
������
E���#"#����#���������*�����C�@���#"#������ �#���C
@���#"#��������
���������� ��+�#��#��*
����������� E���#"#����#�������� ������C�@���#"#���"�����C
@���#"#������� ��
"�� �����
��+���������
E���#"#���@�"���C�@���#"#��"���
���3��������������
����'�� ������
E���#"#��������C�@���#"#������ �#���C�@���#"#��������
��������������������������������
1���#���5�#�"� �2 ���"�����#��������78 ::�9����������� �0������-�� �"���)� �+
$� �����*��"#������ �0�������-�� �"���)� ������� �#��#���+� ��"��+"� ������� "�*�1"���#�� ���#��#���#�#���� ���+������"�� �"�������3
� )� ��A�"��
� �*"��#����������
Setting Up the Planning Systems
7–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�� ������#�����*�����#�#���#��#��������#�#��"�� ����"��������� �������������� �� �#"�������� "�*��� ��#�
����� /&��������
)� ��A�"�� (������+"���������7:�0)A9�#��#�"���#"+"�����"�� �"��
� ��#��#��������#�#����#���#�����+��#�"�.����0� ��#�
����5���+��#�"���������������5��������#��#��
���"�� �"���� ����+� ��3
� 1��5���+��#�"��3( ����� #"� ����"����+�������� ��+����"���52���5)2�����)2�
� 1����������5��������#3( ����� #"� ����"����+�"�� �"���� ��+����"�����#����������"�*"���������#���������� ��#�������� "���#��#���#���#��"�� �"���� ��+�������"+"���.����0� ��#�
-+����� �����#�"�+"� ��. ��*��#����#���������#�����#�
#��������"#��� ���������������#������*�������������
#���#�#���+�����*�����
Manufacturing and Distribution Planning
7–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
�*"��#���������� (������+"���������7��0��9�#��#�"���#"+"��#���#�����+
�������#����"������� ��"��"��#��#����"�"���+�#��
#����#"�������������������������������#�#���
�����+����������"���"�������"�#������#"������#�
��"������#����#���#"���++�#���#"����"���#�����#
�������7�������#"�������#�� +C.� ���"�����������
�"�"�� ����#��#����9
����+� ��"����������#�#���������+"����.������
������������� ����#�.���������3
2 (�����#�2���. ���������#
) (�����#�)���"��. ���������#
� 2��� ��������#
- -����#����������#
� 2����������2���"����������#
� 8���� �(�����#"��0��"�#�-�#��#�6" "��
�������#
� �� ������2���"����������#
�� ��.���#��#
�2 2���������
)� ���#��#�6" "��
Processing Options for Supply/Demand Inclusion Rules
WO Types
1. Enter the WO document types for the Inclusion rules. These can be stacked up one after another for multiple document types. If left blank, “WO” will be used.
Work Order Document Types ____________
Setting Up Forecast Consumption Periods
>����#����+����#�������#"�����"���#��"���#"+������"����+�#"���"����"��+����#������������.��� ������������#���#���#�"�"�+���#"���"��#��1����#�������#"���2�"���#�. ��71 :�49�
>�����+"���#���������#��+�������+����#�������#"�����"������#���1����#������#"���2�"���+����������"������ ���#��C�"����>��������#������"++���#�+����#�������#"�����"���+���"++���#� ���#"�����.����0� ��#�
�����#�������#���+����#�������#"�����"���#��#������.���+�#"����"���"���#��#��������"+"���"��#�������"�����#"���+��#����)2052�������#"�������������#�#� �+��� �#"�����"��������#��=�����4��
Setting Up the Planning Systems
7–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Before You Begin
� A�"+��#��#�#���+� ��"���"�+���#"������.�����#���3
� 2 ���"���+������ ��F�"�������+"��������� "#� :0�1
� ��������#����"�������+"��������� "#�:�0�1��#��"�� ����"��"����������� �� �#"��
� ����C�F-2�@���#"#��#����"�������+"��������� "#� :0E���#���� �� �#��"���������@���#"#�
� ��������#����"�������+"��������� "#�:�0-;��#������#��"����#��7"�� ��������#������9
� ����2 ���"���1�����)� ��+"� �����#���2 ��#�5���+��#�"�����#�+�����"#������ ����+�F
� ����2 ���"���1�����+"� �����#���2 ��#�5���+��#�"�����#��+����"#������ ���.������#��������+�#���� ���"�����"G��
� ���������"�#������"�����#"���"��#����)2052�������#"�������
E���3�>�����#��#����#���� ���"���+�����+"� �����2 ��#�5���+��#�"�����#��"#������ ���.������#��������+�#���� ���"�����"G����7���������������������� ���"���+������+�%%%9��-+����������#��#�#���� ���"���+����.������#���� ���"�����"G����#���.�#���� ���"���������7�)2052�05)2)������#"�������D�#�������9��" ���#���*����� ��
�����������������������������
1���#���5�#�"� �2 ���"�����#��������78 ::�9��������1����#�������#"��2�"���
Manufacturing and Distribution Planning
7–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����*��"#��1����#�������#"���)��""�������� �#��#���+� ��"��+"� ������� "�*��T3
� 2�"���������#�
� 2�"�������
����� /&��������
2�"���������#� (���#�������"���#�����+"������"�������
2�"������� (�#�����+������#��.������"�����/���#"����"#��1����#
������#"����A� "���� �����3
1� 1����#�������#"�����"��
�� �"����"��.��*�#
Setting Up Order Policy Rules
>�����#��#���������� "���� ��#�����#� ������� #" ��� ���#������� "���� �� �#����#������@���#"#"������������� "���� ��#��#������#������3�
������������ -�� ����#���"#���"��#����)2��5)2����52��� ���"������
�����#������� ���"��������#�������#���"#����;�
� ���"��������$������� �+���� #"C ��� ���#�
����� "����;��� ���"��������:�����4�+�+����#"��
�"#����� ���"���." �
Setting Up the Planning Systems
7–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
-������������� ��"���#������ ��"++���#�� ��+������"��
"����#�"���"�� ��"���+"=�������@���#"#��� �#�+�� �#���
���.���+�������� "����1���=��� ��������"����
%�C������� ���+�AC�����"���
9���������%�����
�����������
-��"��#��#���#��+����������� ���#"���+�����"#���#�
�����#��#����������"#�"��#��*����#"���
>�����#��#�#��� ���#"����+�#�������#���"#���#��G����
#��#�#�������#�� ���������������������"��# ��#��#��
��#"�����������@�"����#��"#���#�.�"����++�#�.��#��
���#"���������#����� #"� "��#���� ����������.��#��
+��#���� ���"��������#����.�+���� ��"���#���� �����
��������������#�����@�"����#�
��������������������
1���#���-����#���5�#�0�����#"��������78:$$$9��������-#��6����02 ��#�
$� �����*��"#��-#���6���������� �#��#���+� ��"���+"� ������� "�*�1"���#� ���#��#���"#���+����"����������#�#��� ������3
� -#���D��.�
�� �����������������������(��"#"��� ���#���-�+���#"���+���#���)�������
Manufacturing and Distribution Planning
7–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ���(��"#"��� ���#���-�+������� �#��#���+� ��"���+"� ��#�����#� ������ #" ��� ���#������� "����� �� �#����#������@���#"#"�������#����� "�*�T3
� ����2� "�������
� 2 ���"����"���1��������
� <���#"���<���
Setting Up Stocking Types
��#������#��*"���#����+�������"#���#��"���#"+����������#��*�"#�7+���=��� ����+"�"����������������#�"� 9��
���������� ������
1���#���-����#���5�#�0�����#"��������78:$$$9��������-#���5�#��
Setting Up the Planning Systems
7–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
$� �����*��"#��-#���5�#��6��������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���"#���+����"����������#�#��� ������3
� ����-#���D��.�
�� ������#������������� "�*��� ��#�
� ���-#���5�#��)��""�������� �#��#���+� ��"���+"� ��#��"��"��#���������#��*�#���"#�������� "�*��T3
� �#��*"�������
Manufacturing and Distribution Planning
7–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
�#��*"������� (������+"���������7:$0-9�#��#�"��"��#����������#��*
���"#����+���=��� �����+"�"���������������
��#�"� ������+� ��"���#��*"���#����������C�����
����������� ����#��������#���3
� 2���#���"#��
6 6� *�+ ���#��*
� ���+"�����"#��
� ��������0����#"�����"�#������
1 1��#��
T T"#�����#�"#��
D D��#��*
����+"#������#���+����"�#"�����"��#��������+"���
�����#�. ��"��"��#��"+�#���"#���"���������729��
����+��#����759�
Defining the Stocking Types for Processes
>�����+"���#���#��*"���#�����+������#���"#"���"��#����������"#���+��"#���C�����#����"��#��"#���
�������������� �������������������
1���#���-����#���5�#�0�����#"��������78:$$$9��������-#���5�#�+
Setting Up the Planning Systems
7–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
$� �����*��"#��-#���5�#��6�����#�� ���#�����������"#������������ �#��#���+� ��"���+"� ������� "�*�1"��3�
� ����-#���D��.�
�� ������#������������� "�*��� ��#�
� ���-#���5�#��)��""������#�����)�"��#���+� ��"���+"� ������� "�*��T3�
� �#��*"�������
����� /&��������
�#��*"������� (������+"���������7:$0-9�#��#�"��"��#����������#��*
���"#����+���=��� �����+"�"���������������
��#�"� ������+� ��"���#��*"���#����������C�����
����������� ����#��������#���3
� 2���#���"#��
6 6� *�+ ���#��*
� ���+"�����"#��
� ��������0����#"�����"�#������
1 1��#��
T T"#�����#�"#��
D D��#��*
����+"#������#���+����"�#"�����"��#��������+"���
�����#�. ��"��"��#��"+�#���"#���"���������729��
����+��#����759�
Manufacturing and Distribution Planning
7–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Defining Co-Products and By-Products
;��#�����C06�C2����#�2 ���"�����. ��#���#������C�����#�����.�C�����#������+��52������5)2����"�#�. �����"+"��#��������#�����+�#���������+����C�����#�#��#�"��#"+"���+����������*���������#��������#���#��#�"��#"+"���+����#��������
>�������� �����"+�����"� ��"���#������1���=��� ���.����#�"���!4������#"��#���#�. ����������"+��#��#�!4������#��+��������"��#"+"���+���������*���������#���.� �����+����#��������������#�����#���#"�� ��#"+"��#���.� ������+���=��� ���.��� ���"�����C�����#���*���������#"��������������
-+�����C�����#�����.����������.������#��������������.�#�������������"��#���#�. ����������� ���#��#�����C�����#��1���=��� �����&4������#�C 4������#�� �#"���"�������="#�.�#�����#���#���������
������������������������������
1���#���2����#���#"�����#��������78 �:�9����������C06�C2����#2 ���"�����. ��
$� �����*��"#����06��2����#�2 ���"�����. ������� �#��#���+� ��"��+"� ������� "�*�1"���#�� ���#��#�����06��2����#�#�. �3
� 6����02 ��#
� ��06�'2����#
�� ������������������ "�*��� ��#�
Setting Up the Planning Systems
7–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����06�C2����#�2 ���"�����. ��)��""�������� �#��#���+� ��"��+"� ������� "�*��T3
� 2 ���Q
� ��#�Q
� �++��#"���1��
� �++��#"���������#�
����� /&��������
2 ���Q ���������#�����+��������+�������"+"���+��#���.���
�����/��#��������#"����1���=��� ��������������"��#
�������&4Q��+�#��"� �."���#��"#���"����"��"#������
4Q��"#�� ����"��"#���.���������#�����������
����5�#�"� �2 ���"����#������#�"������#����#�
�����#� ��� ���+��������H���C�����#����
.�C�����#����#�������#��������� �����.���+�
�=��� �����#��4Q���4����������+�� #��� ���"��Q�
*�� ,������������� �����+++++++++++++ ++++++++++++++
���������#�����+���� ��+��������"+"�������
Manufacturing and Distribution Planning
7–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
��#�Q (������#����#��#�#����"�� �#����#�)� �����������
#���� �� �#��#�����#��+���+��#�������#"���"#������
�����#�����+�#���#�#� ���#��+�#�������#�
��#��#��������#����������� �����.���+���=��� ��
��#��4Q���4���
*�� ,������������� �����+++++++++++++ ++++++++++++++
;���#���� �� �#��#�����#��+�����C�����#�����.�C�����#
�����"#�����.����������+�������#���������������
+��������."��#"����+����������������*��������"
�� �����#��"������#������#�����+�#�����#��+�#��
��C�����#�����.�C�����#�"�� ���#���#��#���� ��#��
�����
Defining Order Policy
�����������"#���"�� �����"��52�05)20�)2��������#�"���#"+��#���� ��+����"������"#"��� ������#�+�������.����0� ��#�#��#���������#���������+��#���#���"#���
���������������������������%������
1���#���-����#���5�#�0�����#"��������78:$$$9��������-#��6����02 ��#�
Setting Up the Planning Systems
7–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
$� �����*��"#��-#���6���������� �#��#���+� ��"���+"� ������� "�*�1"��3
� -#���D��.�
�� ���������������������(��"#"��� ���#���-�+���#"���+���#���)�������
� ���(��"#"��� ���#���-�+������� �#��#���+� ��"���+"� ��#��"���#"+��#��"#��������#�C����� ���"#��3
� ����2� "�������
����� /&��������
����2� "������� (������#��#���"���#��#���� ��+��"����#�������"��
"��#���52�05)20�)2��#����A� "���������3
� )�������"�#�7��#�� ������.��52�05)20�)29
$ <�#C+�C �#������@�"��
� 1"=�������@���#"#�
������"������@���#"#��7��E9
: 2�"����+���� �
4 )�#������� ���"#��
����������.�����������������
See Also
� ����������� ������ ���������������������� ������"��#����������������� ��������
Manufacturing and Distribution Planning
7–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Verifying Repetitive Routings
(���#"���"��� "#��+�#�������#"�������������#��#�����@�"���#������ �#����������������#"#"�����#"���"�� ���� "��������� �"�+���#"���"��#�������������+�#�����#"������� ���+�����������#"���"��#�����#�" �����
�%������������%���������
1���#�����" ��2�5��"��#�������78 �$$9����������#�0�������)��#"���
$� �����*��"#��)��#"�������#"�������� �#��#���+� ��"���+"� ������� "�*1"��3
� 6����02 ��#
� -#���D��.�
�� ���)��#"����� ��#"���-�@�"���������#�����#"���#��#��������#������ "�*�� ��#�
� ���������������@�������������#��#��������� "�*��� ��#�
Setting Up the Planning Systems
7–23OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
:� �����#��)��#"���-�+���#"������"���#���+� ��"���+"� ��+����������#"����@�����3
� <"��0�� �-���#"+"�
� )������;�"#
� �����"���<���#"��
4� -+�������*���������#����������#"����� "�*��T�
����� /&��������
<"��0�� (����.��#��#���+"����������#"��� "������� ����#�" ��
��*����#������#"�������.����+"����"�"���#��� "����
�� �
)������;�"# (����.��#��#�"��"��#������������+�#��� "��H������
��"#�����������#�������������"#���
�����"���<���#"�� ����#����� ���#"���+�����"���������" �.��������
See Also
� ����������������������������"��#����������&�������� ���������#������������������ �#����#"��
Manufacturing and Distribution Planning
7–24 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Creating Line and Item Relationships
<"��0-#���)� �#"���"��"���#"+"�������"��������#"��� "����������#�"���. ����<"��0-#���)� �#"���"��� ����+"����"+#�������"���"�+���#"���+�#��#� "���
������������������������������
1���#��������1 ���5��������#���#��������78 $:$9��������<"��0-#��)� �#"���"��
$� �����*��"#��<"��0-#���)� �#"���"������� �#��#���+� ��"���+"� ������ "�*�1"��3�
� 6�����2 ��#
� -#���D��.�
�� � "�*�(���
Setting Up the Planning Systems
7–25OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ���<"��0-#���)� �#"���"��)��""�������� �#��#���+� ��"���+"� ������ "�*��T3
� <"��0�� �-���#"+"�
� �����"#���������
� ;��(���+�� #�7�0$9
-���#"+��#�����+�� #� "��0�� �.��#��"���$�
� ��+�� #���"+#
� ��+�� #�2�"��
����� /&��������
<"��0�� �-���#"+"� (����.��#��#���+"����������#"��� "������� ����#�" ��
��*����#������#"�������.����+"����"�"���#��� "����
�� �
�����"#��������� (����.��#��#�"��"��#������������+�#��� "��H������
��"#�����������#�������������"#���
;��(���+�� #�7�0$9 (������#��#���#��"�����"���� �#"���"��#����#��
������������+�� #��� ���
Manufacturing and Distribution Planning
7–26 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
��+�� #���"+# (������+"���������7��0�F9�#��#�"���#"+"����" ����*
�"+#��-������ ��#������������������"+#������#�����
�������#�����������#�#��#������ ���#�������#"������
1������ �����#"�����#�3
-+������� ������ ������*����"+#�+����"������"+#��#�
�"++���#"� �"���� "��. �����#��#��#��"+#���������#��
��� ����H���#�������������������#��#����"+#���
#������ ����H���#�����������������#������#����#�
#�����������#���#"�����������������#��#"���
-+������� ���������"��� ����*����"++���#��"+#�����
��#��#����"+#����������������� "��. ��#"������#�
���"���#�����+�� #��� ���
*�� ,������������� �����+++++++++++++ ++++++++++++++
�����#������#�"�+"� ����#�����+�� #��� �����������
��#���#��
��+�� #�2�"�� (������#��#���#��"���#���+�@�������+�#�������� ��
A� "���������3
$ 5��#� �
� ���* �
��" �
: 2����"+#�7+��+�#�����9
*�� ,������������� �����+++++++++++++ ++++++++++++++
�����#������#�"�+"� ����#�����+�� #��� �����������
��#���#��
See Also
� '����������� ��$�����������������"��#���'���*��������� ��������
Verifying Rate Schedules
(��#������� ��"����@��#�#�������������#�"��@���#"#���+�"#�����������"+"����"��"��.�"�+�����"���� ���#���+�#"����)�#������� ��� "�"��#��#��������#����#���� #"� ����*�����+��"#���#��#��������#�#������������#� ������* ������" ��"����� ��@���#"#"���>�������� ������#������� ��"�����#"#"������+��#�"���
������#�����#������� ������3
� ����"+�����"���"���"�+���#"��������������� ��#���������++��#"����#�
� ����"+�������#"���"�+���#"����������#���"#�������@���#"#"�������"��#����#��"�.���
Setting Up the Planning Systems
7–27OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
>��������������"�����#"���#����+"�������+�� #������ ��#���������� ���"��������������� ����>�������� ��������#���"� ����� ����#"�������� ��-�����"#"��������������������"�#���+���.��"��"��#"���#�����"����+�#���+���"��#�������"�����#"����>����������#����+���#���"����������"+�"�+���#"���+����#"������*����#���52�05)20�)2�#"����"����#�������#"������������ "���
�������*"����"#���#������� ���������� ��*����#���+� ��"��3
$������������������ >��������� ���� �#�����#������� ��"+�"#���������.���
�����(�#"����#������� �������#�.���� �#����>�����#
� �����#�#�������� ��
$�������������������� >���������#����� "��#���#������� ��
������������������� >�����#���#"�� �����#�����#���������������������#�
)�#��������"����#�" �5�����)��"���
Before You Begin
� ��#����#�����*����#�����������+��#�"���"����� �#��������'��������!��"��������"��#���'���*��������� ��������+
� ��#������#"���"�#��#"�������������������������������������"��#���'���*��������� ��������+
� ��#���� "��0"#���� �#"���"���������������$��������� ��������������
Manufacturing and Distribution Planning
7–28 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�%������������������
1���#���)�#��6���������� "��������78 $$49����������#�0�������)�#������� ��
$� �����*��"#��)�#�������� ������� �#��#���+� ��"���+"� ������� "�*1"��3
� 6����02 ��#
� ��������
� -#���D��.�
� <"��0��
� �++��#"���1�����#�
� ������#�
� 1����#�#�
� �����#�#�
�� )��"���#���+� ��"�����+�� #�"�+���#"��3
� 2�"��
� ��"+#
� ��#�����$
� ��#������
� ��#�����
Setting Up the Planning Systems
7–29OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� E#������ �#��
� E#���������
����� /&��������
2�"�� (������#��#���#��"���#���+�@�������+�#�������� ��
A� "���������3
$ 5��#� �
� ���* �
��" �
: 2����"+#�7+��+�#�����9
��"+# (������+"���������7��0�F9�#��#�"���#"+"����" ����*
�"+#��-������ ��#������������������"+#������#�����
�������#�����������#�#��#������ ���#�������#"������
1������ �����#"�����#�3
-+������� ������ ������*����"+#�+����"������"+#��#�
�"++���#"� �"���� "��. �����#��#��#��"+#���������#��
��� ����H���#�������������������#��#����"+#���
#������ ����H���#�����������������#������#����#�
#�����������#���#"�����������������#��#"���
-+������� ���������"��� ����*����"++���#��"+#�����
��#��#����"+#����������������� "��. ��#"������#�
���"���#�����+�� #��� ���
��#�����$ (������+"���������7��0�$9�#��#�"��"��#��#�������#
#������������+����� �����#�+������*������>������
�"�������*�����#���� �����������������#���#"���
D�#�3���#�"��+������#�"��������"�����#"���#��#
� �������#����#������+�� #��� ���+��#�"�+"� ���-+����
��#������+�� #��� ��������+���+����"�������������#
#�"�����"�����#"����#����#����"� ���#����� ���"��#��
�����"�#��+"� �����������*�����#��#��������#������
�#���� ���"� ���#����� ������#���2�/��#���#���+���
>��������"#��������#������"���#�����+�� #��� ���
D�#�3�(�����"�����#"���+��#����()���#�� �#�������#�
����+�� #��� ���+��#�"�+"� ��������� ���#�����"� ��
��#���#"�� ��"��#�����#��������+"� �����#����()���#�
+�����������������������()��>��������"#��������#��
���"���#�����+�� #��� ���
Manufacturing and Distribution Planning
7–30 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
��#������ (������+"���������7��0��9�#��#�"��"��#��#���#�����
��#������+�����*�����
D�#�3�(�����"�����#"���+������+��� �#�������#���
��+�� #��� ���+��#�"�+"� ��������#�����#��#�����+�� #
�� �����#���#"�� ��"��#��������"�#��+"� �����������*
����#��#��������#�����#����+����������#���2�/��#
��#���+����>��������"#��������#������"���#�����+�� #
�� ���
D�#�3�(�����"�����#"���+��#����()���#�� �#�������#�
����+�� #��� ���+��#�"�+"� ��������� ���#�����"� ��
��#���#"�� ��"��#��������#��+"� �����#����()���#��+��
��������������������()��>��������"#��������#��
���"���#�����+�� #��� ���
��#����� (������+"���������7��0� 9�#��#�"��"��#��#���#�����
��#������+�#�����*�����
D�#�3�(�����"�����#"���+������+���� �������#�
��#������+�� #��� ���+��#�"�+"� ��������#�����#��#��
��+�� #��� �����#���#"�� ��"��#��������"�#��+"� ����
������*�����#��#��������#�����#����+���������
#���2�/��#���#���+����>��������"#��������#������"��
#�����+�� #��� ���
D�#�3�(�����"�����#"���+��#����()���#�� �#�������#�
����+�� #��� �����#�"�+"� ��������� ���#�����"� ��
��#���#"�� ��"��#���)� �������1"=�+"� �����#����()���#�
+�����������������������()��>��������"#��������#��
���"���#�����+�� #��� ���
E#������ �#�� �������.���+���"#�����"##���+���"����#�"���� �
������#����"����"#���#�����#������#����"������"#
�+���������+"����+��#�"�"#���
-��#���5���+��#�"����#���������*������"�����#��
#�"�+"� ������"��"��#������ �#������������@���#"#"��
����@���#"#��#����"���#��"����.��#���#�����������#����
E#��������� �������.���+���"#������ ���"���� ����������*
����2���"�����"����"#���#�����#������#����"���
��"#��+���������+"����+��#�"�"#���
-������+��#�"����#�"������ ��.��#������.���+���"#
�������#����#��
E#������ �#�� �������.���+���"#�����"##���+���"����#�"���� �
������#����"����"#���#�����#������#����"������"#
�+���������+"����+��#�"�"#���
-��#���5���+��#�"����#���������*������"�����#��
#�"�+"� ������"��"��#������ �#������������@���#"#"��
����@���#"#��#����"���#��"����.��#���#�����������#����
Setting Up the Planning Systems
7–31OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
E#��������� �������.���+���"#������ ���"���� ����������*
����2���"�����"����"#���#�����#������#����"���
��"#��+���������+"����+��#�"�"#���
-������+��#�"����#�"������ ��.��#������.���+���"#
�������#����#��
See Also
� ������������'�������������!��"���#�������������'���������"��#���'���*��������� ��������
Manufacturing and Distribution Planning
7–32 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Multifacility Planning
Manufacturing and Distribution Planning
7–34 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
8–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Multifacility Planning
-������ #"+��" "#������#"����� �����������#�#����������+��" "#�����#��������+���������#�#������ ��+��" "#���>����#����������"�#�"���� #"+��" "#��� ���#�3
� 5������#����������#��+���#�"� �#�������"#".�#"�����#��*������ #"� �������#"���+��" "#"�
� 1��� "G��#���������+�#��+�"���"#�������������+��" "#"�
� ���#��"�#��� �#��+������#���� �������#����." "#���+���#�"� ����#��"���#�.�#�����+��" "#"�
� �����#��#�#���+��" "#��+�����"�������������"������������"����#���"��#��*�#��+" �#��������������� ��#������ ��� ��#�#��������"#
� ������ �������#"��������"���#���� "#"��#"���+���
� ;�����. �� "����#������ ��#�#��.��"��#������. ���+��������#�������"++���#�� ��#�+��+"�� ����. �
� F��� ��� ����� ���������#�#�������#�#�������+��#�"�����#��*
�)2052���� #"+��" "#��� ���"������"#��+�#���+� ��"���#�*3
� ��##"�������� #"+��" "#��� ���"��
� 8����#"����� #"+��" "#��� ��
� ��*"����"#���� #"+��" "#��� ��
5� #"+��" "#��� ���� ������#�����#� ��+�������#��"���>���������+"��+��" "#��� �#"���"���#����� ��� ��+���#�" �+�������#"��+��" "#����������#��������#��� ���"���+��" ��������"��"�"��� �"#������.���-�����"#"�����������"������#��� �����+��" "#"��"�#����"�� ��� ���
-��5)2��#����#���#��+��"#�����������������+��#�"���� ��#��#�#����������#� ��� �������#���#��+����������#�"#���.�������#"��3
� 2�����������#�#����������� ��#�+��#������ ��� ��#
� �� ������+���#����������� ��#��#�#������ ��� ��#
Manufacturing and Distribution Planning
8–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
-��#���+� ��"����=��� ���#����������� ��#�75449����"�����������#�+��#�����"++���#���� ��� ��#������ ��� ��#������ ������+��#���#�������� "���. ��"#���
Branch/Plant M55Item Calendar Demand Line
100 100 100 100
Branch/Plant M56 – 30%Item Calendar Planned
Orders
30 30 30 30
Branch/Plant M80 – 30%Item Calendar Planned
Orders
30 30 30 30 Branch/Plant M95 – 20%Item Calendar Planned
Orders
20 20 20 20
(�.��*������+�#��������#�������"����+����������� ��.����0� ��#"��"��#��#��#�544��#"+"����������#��+�"#��@�"����������+���#���#������ ��.����0� ��#��-��#�"������#����������� ��#�� ����� "��#�����"�"�����������#��+�#�������"#���
����#�����+��� #"+��" "#��� ���"���������" �. �3
������������� 5� #"+��" "#��� ���"���+������ "��#"���� �������#�3
� ���."���� �� ���"�����#"�"#��������������"+"�+��" "#�
� A"���#�#� ��@�"����#�#�������#�������#��*�+�������� ������#����/��#"��
� A"���"��"�"��� �+��" "#"�H����#".�#"���#����� �������������"#������" �." "#�������� �
� �� ��#�����"�����#"���#��#������#��� ���"���+����C���� "��#���.�����
� ���� "��#��� �� ���"����@�"����#��#���� ��#��.����
� ���#��� ���+��������+�����"��"�"��� �+��" "#"����� ���������� �� ���+��#�������#��������
8–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
.����������������� 5� #"+��" "#��� ���"���+��.������ �#"���"��� ������
#�3
� ;��#���.����0� ��#�� �#"���"��#���=� ����������#������#������ ����#��*
� 2��"���������+��#�"�����#��+��+��" "#�������+�����������#�"#����"#�"����." ��+���#�"�
� 2"�*�������+��#�������#��#������.��+��" "#���"#���#���#"������"�#�+��" "#��#��+�����
� ����"+���������.���+���� ��+��" "#"��+��������������#
� 2�������+�#����������+���#����������� ��#�#�#������ ��� ��#
Manufacturing and Distribution Planning
8–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
8–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Setting Up Multifacility Planning
>����#������ #"+��" "#��� ���"���#��#��*���� ����������������������#��+��#�"� �������#���"��"�"��� �+��" "#"���+�������#��"���5� #"+��" "#��� ���"�����"�����+ �=". ����#����+��� ���"������ ���������� ����#"�"#"��
-���� #"+��" "#��� ���"���������#��#������#�. ���+���� ������������� �#"���"������������+��" "#"��������#������#����� �#"���"��#������#��������"�#�"���� #"+��" "#��� ���
��##"�������� #"+��" "#��� ���"������"#��+�#���+� ��"���#�*3
� ��##"��������� �������������� �#"���"�
� )��"��"���.������ �#"���"�
Before You Begin
� A�"+��#��#��)2���52��"��#����
� ;���#����#���������#�����#������".���"�����������������'���������+
� ;���#����#���������#�����#������".���"�����������.���� ������������+
See Also
� '�������������������'���� ��+��"�+���#"����.��#�����#����+"����)2��52����#��#��#�#����#��������"�������"��
Setting Up Supply and Demand Relationships
;��6�����)� �#"���"��)��""���#���#������� �������������� �#"���"�+������ ��� ��+���#�" �#��#������������"�� ��"��3�
� 6����0� ��#
� 2����#�����
� 5�#��� ���"���+��" �
� -��"�"��� �"#������.�
Manufacturing and Distribution Planning
8–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
��"���������� �������#����"�#�"����� �������������� �#"���"��"��������#� � ���#"�������������"����#������������.������ �=�+��" "#�� �#"���"���-�����"#"��������������#������� �������������� �#"���"�������������#���+� ��"�����#"��� �+��#��3
,�� � >������������#����#�����#���#"�� ����*����#�����#
�+����"#���������������#����#��+������������#��
������/�#�#�����#�.����+"=��������#��������#����
�%�������������� ��� >������������#��#�#���.�����+�����"���������
���"�������������"����#���"��#��*�#��+" �#��������-+
#����@�"���@���#"#��"���#����" �. ���#����#�������*
�.�@���#�+��" "#"��"��#����@������#��#�������+"���
/������%�������� ;���++��#"�"#����#��#�����#� �#����������#��#���
� ��������������� ��.�������-+�����++��#"�"#����#��#��#
����"�����#������� ��.���������=�"����#����#��
����*�+�����#���+��" "#��
����5)2�6�����)� �#"���"��)��""�������������#����)2052��6����)� �#"���"��)��""������������#�����������"�����#"����>����������#����##"���"��#�������"�����#"���#�����������#��#����"++���#�@�"����#�+������#�"� ��@�"����#�� ���
�������F������������ �#������� �������������� �#"���"���#����#���� �#��#�����#"�������
Setting Up Multifacility Planning
8–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
������������������������������
1���#���5� #"C� ��#���#��������78 :: 9��������6�����)� �#"���"�)��""��+
$� �����*��"#��6�����)� �#"���"������� �#�������+�#���+� ��"���+"� �3
� ���� ��6����02 ��#
� �������2 ��#
;��#���A"��������#���"#���+����"��"���#������ ��.����0� ��#�#��"��"���#����������.����0� ��#��(�����"�����#"������#� ���"��.����0� ��#�"�#�����+�� #�
�� ���������������������� �#�������+�#���+� ��"���+"� ������� "�*1"������#�����"#������.��#���"� ���� �.����0� ��#�#��#��"#������ ��������������#�"����#����#��#���� ���"���+��" ��#���"� ���� .����0� ��#�#��#��"#������ �������������#�#��#�.� ����#�������"+"���#��� ���"���+��" ��
� -#���D��.�
� 2 ���"���1��" �
� ������#������������� "�*��� ��#�
Manufacturing and Distribution Planning
8–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
:� ���6�����)� �#"���"��)��""�������� �#��#���+� ��"���+"� ���#���� "�*��T3
� �++��#"���1��
� -�� ���0��=� ���
� ������2����#
� 2����#�#��1"
� 2����#�5�*��
� 1"=���5�*��
� ;�"#0��=#�����
4� ���� �#��#���+� ��"�����#"��� �+"� �3
� ���+��<���#"��
� 6�����<���
� 6�����2"�"#�
� (��" �." "#������*
����� /&��������
-�� ���0��=� ��� (������#��#�"��"��#�����#���#����#���"�� �����
�=� ����#���"#��0��#����������"��#���6����
)� �#"���"��5�#��#�. ��71 :� 9�����������#"����
�� #"C� ��#������ ���-+����"#��0��#����������"
�=� ������#����#��#�"#��0��#�����������" �.���������
������+��#�����#�#����������.�����
Setting Up Multifacility Planning
8–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
������2����# �����#����������������#����#����#��"������#
�����#�����+�#���� ������������� ��.����� "���.�
#��������.�����
1���=��� �3
�������6�����V�(�<���� ��6�����V���D�����������#����?:�Q���F-�����������#����?�&�Q-+�(�<������$�����#��#����#��������#���������#��#��+��:����#�+�����D�����&���#�+����F-�
(�����������#�����+�$���#��+��#�����#"����� �
+���#��#�.����0� ��#�
2����#����1" (�+"� ��������"����� #"C� ��#�����"���#����#��"��
���#������#��+����������� ��.��+" ���#��� �����
#��+�������������1���=��� �3
� 2����#�#��1" �'�!4Q� �������'����� -+�#������ ��.��������$4��7!4������#��+����9
���������" �. ���#����#���� ���"����#��� ����#���#��+������������
�����#��������#��#���#��+����������������
#��������#�#��+" �"�G���
2����#�5�*�� ���������#���*���"�#��������#��+�#�����#�#��#�#��
�#����������*���������#���"#���"�#��+����+��
����.�����#�����#���
1"=���5�*�� ���������#�#�����#����*����#�����#������#���"#���"
#��+����+�������.�����#�����#���
;�"#0��=#����� ��"��������#��"���"+�#���+"=�����#���*���"�#��.�
������#��#�����"#���#���#����=#��������#��A� "���� ��
��3
; (�����*���#��#�����"#���#
� (�����*���#��#����=#��������#
���+��<���#"�� �������.���+�����#��#�����@�"���#���"��"#���+��
#������ ��.�����#��#����������.��������"� ���#"���"
�#����"��#���6�����)� �#"���"��5�#��#�. ���������
����+���"++���#���#�������������"++���#�"#���
6�����<��� ��#��"���#��� ��� ��#���"�������������#�.����
��� ��.���������"���� #"C� ��#�����"�������
���#� ��� �.������7��"�������"��������"���
����"�� ��� ��9�����������+"#��+� �����.��#��
�"���� ��� �.������7��"�������"������� ���
����"�� ��� ��9�
D���3�("���.����� ��� ����+� ����#��#�#���� ���"��
�#��������#��� ��������.�+���� ���#"������ ��
Manufacturing and Distribution Planning
8–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
6�����2"�"#� ��#��"���#����@�������"#�"���� ��� �#��#�#���.�����
����������"���� #"C� ��#��)2052�05)2��;��#�"�+"� �
� �����"#��#���6�����<��� �+"� ��#������*�"����#��
���" �." "#��+"#�"������.����������#�������#���
(��" �." "#������* -��"��#��"+�#���� ���"����#����" �����*����" �." "#���+
#���"#�����+��" ���#�#������ ��.����0� ��#��-+����
���. �����" �." "#������*"������#���"#�����+��" ��.�"��
����������#������" �. ��"����#����#�#���.����0� ��#
�" �.������"##�����#" �#����"���G���.� ������-+����
�"�. �����" �." "#������*"����#���"����#���.� �����"��#��
��� �"���.����0� ��#�����.������#"���
Processing Options for Branch Relationship Revisions
Defaults
Enter the default Branch Relationship display mode.
1. ’D’ = Demand branch ’S’ = ____________ Supply branch
Enter a ’1’ to automatically update the Branch Level field.
2. Branch Level update ____________
E���3�>�����#��#�#�"�����"�����#"���#�������#��#�#��� ��� ��+�#����������#�.�����"����� ��� ��"����#����#���������+��#��������.���������.����� ��� ����#�����+�� #�#�.��� �����"#��#���.������"�"#�����#��"��#����@������"����"���#����#������������ �������������� ��#������#���������#���.�������"#��#����"���#�����"�� �.����� ��� �+"#�
Reviewing Branch Relationships
;��#���6�����)� �#"���"�����#�#����"������ �������������� �#"���"�"��������"�� ���"����"�� �+���#������6�����)� �#"���"�����#��"� ���#��+� ��"��3�
� 6����
� <��� ��+�#���.����
� ���� ��.������+��#����������"����������.����
����5)2�6�����)� �#"���"�����#�����������#����)2052��6����)� �#"���"�����#����������#�����������"�����#"����>�����������#���##"���"��#�������"�����#"���#�����������#��#����"++���#��@�"����#+������#�"� ��@�"����#�� ���
Setting Up Multifacility Planning
8–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%��'������������������
1���5� #"C2 ��#���#���78 :: 9��������6�����)� �#"���"�����#�
$� �����*��"#��6�����)� �#"���"��F"����������� �#��#���+� ��"��+"� ��#�� ���#��#���.����0� ��#�+����"����������#�#���"� ������ ������������� �#"���"�3
� ����0����6����
�� �����������������#�������"+"�� ��� ��+���#�" ������ �#�������+�#��+� ��"�����#"��� �+"� ������#����� "�*�1"��3
� -#���D��.�
� 2 ���1��" �
����� /&��������
2 ���1��" � ��"�"��������+"���������+����#���:$��#����2:�
�������"���������������"G�� ��"�� �C� �#���"#���
>�������"�� "+��#�����#��� ���"��������.�
������#�#"�������� ��#���#���$�Q��+�#���"����#����� ���
��"�"�"�" ��#���"���#���(6��(�� �"���=���#�#��#����
�������#�"������#��� ����=���#"���#�����C���C+�#
(6��� ��
8���� ���������� ���� ��"�� ����"#����"#���"��
"����#���"���#���#�"��5�#��2 ���"�����=���#��*
����.����"���+��"����#���"#����"#�� "## ��+"����"�
"����#�
Manufacturing and Distribution Planning
8–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
8–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Generating Multifacility Plans
1���#���2�"��"��5� #"C2 ��#�2 ���"��������78 :� 9��������52�)������#"�����5)2�)������#"���
(+#������������#����#������ �������������� �#"���"�����������.����0� ��#��������������)2052�05)2�)������#"���#�������#����� #"+��" "#��� ����( #���#"�� ���������������)2052�05)2�D�#��������#������#������ #"+��" "#��� ���
��������������#������ #"+��" "#��� ����#����#������ ��#��� ��#��"�+���#"������+����� �� �#"�������������������#"��C������� ���+��� � ��#���"#���
>����������5)2���� � �����"��������#���#������#�*������.������� �#���"���#����#����-��#������ � �����"�����#�����#����#���� ��"#���"�� #����� ���"����� #"� �����������"���#����#�*��� �����������#����=���#����.�#������������������#��#��������#��������������������� � �����"�����#�������"����"��"+"���#���+���������"�����"��
��� "�"#����� ��.��#������.���+�������#��#�������" �. �������������
�����#������#��������#���.�#�����"���#�������� � �����"����-�#�"���"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������������#������#����������#���=���#��#���.�#�����"���
E���F���+�����������#�����#���+�����+"�����"#����-����+�#��*�����+"�����"#����" ���#�.����#�������# ��"+�������������.�" ������+"������.���. ��"�����"++���#�.����0� ��#�#����#������+"���������#�
Before You Begin
� ��#�����)2052���� #"+��" "#��� ���"��������'����������������������������+
See Also
� ��������������������������������+�����"#"��� �"�+���#"������������ � �����"�����*
Manufacturing and Distribution Planning
8–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Multifacility DRP/MPS/MRP (R3483)
Horizon Tab
���������"�����#"������"+����#������#"�����"���#�������������������#"���#���� ���
1. Generation Start Date
;��#�"�����"�����#"���#�����"+��#�����#��#������������#��#�#�#��� ���"�����������"���#��"�� ��#���.��"��"����+�#���� ���"�����"G���
2. Past Due Periods
����������"�� ������� �������������+���#�"����.���+���"����"��#�#���8����#"����#�#���#��
A� "���� �����3
� ����"���7��+�� #9$ $���"��� ����"��
3. Planning Horizon Periods
Number of planning days
;��#�"�����"�����#"���#�����"+��#������.���+�����#��.��"�� �����"��#��� ����1���=��� �������������"���#���#"����"������������" ����#��+��#�����.���+�� ���"��������#�������* ����#��+��#������.���+�� ���"������*�#�������#� ����#��+��#������.���+�� ���"������#��
Number of planning weeks
;��#�"�����"�����#"���#�����"+��#������.���+����*�#��.��"�� �����"��#��� ����1���=��� �������������"���#���#"����"������������" ����#��+��#�����.���+�� ���"��������#�������* ����#��+��#������.���+�� ���"������*�#�������#� ����#��+��#������.���+�� ���"������#��
Generating Multifacility Plans
8–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Number of planning months
;��#�"�����"�����#"���#�����"+��#������.���+����#��#��.��"�� �����"�#���� ����1���=��� �������������"���#���#"����"������������" ����#��+�#������.���+�� ���"��������#�������* ����#��+��#������.���+�� ���"�����*��#�������#� ����#��+��#������.���+�� ���"������#��
Parameters Tab
;��#��������"�����#"���#����+"�������"����"#�"���2 ������#��#��+� ��"����.��#��������"����+������#"���#����
8����#"��������$�?�"�� �C ��� �52�0�)2����"������#"���#��������.������"#���"�����"#".�#"������"�����#�+������������#��"#��������#0��������#�� �#"���"�����"��������+��#�"������"�����#��"#�����#0��������#�� �#"���"��
� �������������������#"����"��+�������"#������"+"���"��#�����#�� ��#"����"#����2 ���"���������+�$����#���2 ��#�5���+��#�"�����#�+�������#���#���"#���"�����+��#��������������
� 1������+��#����"#��������������"��=� ����������#��#����������#��;�������#"���#����$�"+��������#�#��������� ��#����#������� �������"#���+"#��������������#�." "G��#�������� �.�+���� ��"�������������#�����������#�
� D������"��������������#���
8����#"�������� �?��� #"C ��� �52�����"������#"���#����"����� #���#"���#������#"���#����$�������+��������� �#��#��C#�C.�##�������"����+���#������ ���"#���������������=� �����������+��� �����#�"#����������"+�"��#�����#��� ��#"��������#��#�����������#��>�����#����"+��� �"#���#��.��������"��#�����#��� ��#"������#�/�#�#�������#�"#��������������� ����#������"��������
8����#"��������:�?�5)2��"#�����"#���#�52�����"������#"���#�������#������+���#"��� "#���������#"���#���� ��-+��������������������� �#������#"�������#�." "G���������#������� ����������� "�"#���#��� ��#"���#�5)2�"#���7�"#��2 ���"���������+����� 9��#���.������"�������"���#"�����"�"���". ��.�������������+���#�����#������� ���"#���"�#" �#���"��#���52�05)20�)2�<����<��� �)�@�"����#�72���"��9�#�. ��
8����#"��������4�?�5)2��"#��+�G���52�����"������#"���#����+��G��#����#������� ���+#��"#����.����#�." "G����6�+������"���#�"������#"���#����������� ����*��� ����������/�#���#�#����#������� ���"#������� ��������#�������#�������������"������#"���#����+��G��#�����#"�� ���"�����"G���"�" ��#��#�������#���+��G��+�����+��G������#��+�#��
Manufacturing and Distribution Planning
8–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
��"G����)���"���#�"������#"���#�������#���+� ��"����� #���"������ ��#�52��"#����� �3
� D�����������" �.��� ������
� D��������+���="#"��������" �.�����#���
� ����(�/�#������"���(��" �. ��@���#"#��"�� �����#���������#"���
� �������"��� ���=� ����������#����������#�+����="#"�����*����������"����C2����������+�������#�"#������ ��C1���������
1. Generation Mode
(����������#"���"�� ���������"#������"+"���"��#�����#��� ��#"����(���#�������"�� ������ ��#����"#���"��#�����#��� ��#"���#��#��������������"���#��� �#�#"����������#���������
A� "���� �����3
$ ��#�������� ���������#"��
2. Generation Type
2 �������#����� ��+��#���2����#��#�.�+����#�" ���"�+���#"���
A� "���� �����3
$ "�� �C ��� �52�0�)2 �� #"C ��� �52�: 5)2��"#�����"#���#�52�4 5)2��"#��+�G���52�
3. UDC Type
;��#�"�����"�����#"���#�����"+��#���;���#�. ��7�#��� :9�#��#����#�"�#��� "#��+�@���#"#��#����#��.���� �� �#��������"##���#��#����"�����"��#�. �71 :$ 9����+�� #�?�E��
4. Version of Supply/Demand Inclusion Rules
;��#�"�����"�����#"���#����+"�����"�����"����+���� �0�������"�� �"��� ��#�������������������� ����+"���#����"#�"������#��� ��#�����+�����"���
On-Hand Data Tab
���������"�����#"�����+"�������#����������� �� �#����C�����"����#���
Generating Multifacility Plans
8–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
1. Include Lot Expiration Dates
;��#�"�����"�����#"���#�����"+�����#���#����#������"��� �#�=�"�#"�����#��������� �� �#"�����C�����"����#����1���=��� ���"+���������������C������"#������=�"�#"�����#���+�(���#� $�����4������������������������#��.��$�����4��#���������������#������"G��#����=�"��� �#��������#���������#������������+��#��������+�#���"#���#���#"+���������
A� "���� �����3
. ��* �����#����"��� �#��=�"�#"�����#��������� �� �#"�����C�����"����#��$ ���"��� �#��=�"�#"�����#��������� �� �#"�����C�����"����#��
2. Safety Stock Decrease
;��#�"�����"�����#"���#�����"+�����#���#��� ���.���������.��"��"�����" �. ��@���#"#��+�����"���#����+�#��#��*�@���#"#�����.�����.#��#���
A� "���� �����3
. ��* �����#�������$ ������
3. Receipt Routing Quantities
Quantity in Transit
-��������+��#�"������"�����#�����#"���"#�"��������#���#�. "������#��*�"��"������#����#��"������#�������#�"#�"����" �. ��+��"����"�#�������#��$�"+��������#�@���#"#"��"��#��"#�#��.��"�� �����"��#���6��"��"��(��" �. ���� �� �#"������#���#"����"����#���"���#���������"�� ����#���@���#"#"��"��#���-��)���"�#�7O-)9� "����+�#���#"����"�������@���#"#"�����#" ���"��������" �. ��.��#�"�������������"++������"��� ��"�����������"��#���@���#"#"��"��#���#"����"��
A� "���� �����3
. ��* �����#�"�� ����"����C�����"����#��$ "�� ����"����C�����"����#��
Quantity in Inspection
-��������+��#�"������"�����#�����#"���"#�"��������#���#�. "������#��*�"��"������#����#��"������#�������#�"#�"����" �. ��+��"����"�#�������#��$�"+��������#�@���#"#"��"��"����#"���#��.��"�� �����"��#���6��"��"��(��" �. ���� �� �#"�����#���"���#���������"�� ����#����@���#"#"��"��#���-�)���"�#�7O-)9� "����+�#���#"����"�������@���#"#"�����#" ����"��������" �. �.��#�"�������������"++������"��� ��"�����������"���#���@���#"#"��"��#��#"����"��
Manufacturing and Distribution Planning
8–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
A� "���� �����3
. ��* �����#�"�� ����"����C�����"����#��$ "�� ����"����C�����"����#��
User Defined Quantity 1
-��������+��#�"������"�����#�����#"���"#�"��������#���#�. "������#��*�"��"������#����#��"������#�������#�"#�"����" �. ��+��"����"�#�������#��$�"+��������#�#���������+"����@���#"#"��7��+"�������)���"�#�)��#"��)��""���"��#���;���#������#"���$�+"� �9�#��.��"�� �����"��#���6��"��"��(��" �. ���� �� �#"�����#���"���#���������"�� ����#����@���#"#"��"��#���-�)���"�#�7O-)9� "����+�#���#"����"�������@���#"#"�����#" ����"��������" �. �.��#�"�������������"++������"��� ��"�����������"���#���@���#"#"��"��#��#"����"��
A� "���� �����3
. ��* �����#�"�� ����"����C�����"����#��$ "�� ����"����C�����"����#��
User Defined Quantity 2
-��������+��#�"������"�����#�����#"���"#�"��������#���#�. "������#��*�"��"������#����#��"������#�������#�"#�"����" �. ��+��"����"�#�������#��$�"+��������#�#���������+"����@���#"#"��7��+"�������)���"�#�)��#"��)��""���"��#���;���#������#"�����+"� �9�#��.��"�� �����"��#���6��"��"��(��" �. ���� �� �#"�����#���"���#���������"�� ����#����@���#"#"��"��#���-�)���"�#�7O-)9� "����+�#���#"����"�������@���#"#"�����#" ����"��������" �. �.��#�"�������������"++������"��� ��"�����������"���#���@���#"#"��"��#��#"����"��
A� "���� �����3
. ��* �����#�"�� ����"����C�����"����#��$ "�� ����"����C�����"����#��
4. Lot Hold Codes (up to 5)
;��#�"�����"�����#"���#�����"+��#��� �#�#��.��"�� �����"��#����� �� �#"���+���C�����"����#����>���������#������="�����+�4� �#��� �������7:$0<9�
. ��* "�� ��������� �� �#�"���� �� �#"����+���C�����"����#��P "�� ����� ��� �� �#�"���� �� �#"����+���C�����"����#��
Generating Multifacility Plans
8–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Forecasting Tab
���������"�����#"�������#��������3
� �����#��"������#�+����#�#����#���������������������
� ���"�"#"�#�����"� � ��"��+��+����#�������#"��
1. Forecast Types Used (up to 5)
1����#������������+���������>����������#��+����#��"���$���"++���#+����#�#����7 :0�19��"#�"��#���1����#"����#��������"����"�����#���6�#1"#�7619�#������������#�����"#��H��"#����+���������;��#�"�����"����#"���#����+"�����"���+����#�@���#"#"�����#���.����"���+����#�#������"�� �����"��#���� ���"�����������#���� #"� ���� ����"#�����������+��=��� �3��$��61�
2. Forecast Consumption Logic
-+��������+����#�������#"��������� ����������"��#���������"�����#��+����#�"�"�� ���������#��+�#���+����#�+��#��#���"����-#�"���#�������"#"��� ������+��������
������+����#�������#"�������"#��H�2 ���"���1�����)� ����#�.��F�����#��2 ���"���1�������#�.��%%%��������� �������#����#���2 ��#�5���+��#�"����#��+���
A� "���� �����3
. ��* �����#����+����#�������#"��$ ���+����#�������#"��
3. Interplant Demand Consumes Forecast
������"���+����#�������#"�������#�"�����"�����#"���#�����"+����#���#�����"�#�� ��#��������#���������+����#��������"��������#��� ���"���� ��������������#�"���#"���#�����"+�����#���#�����"���"�#�� ��#�����������#�����������������#�����#"���"��#��#����#������"��"�#�� ��#��������+��+"������� ������#��+������
�����#�����#"���"�. ��*��#����#���"�����"�#�C� ��#��������.��+����#������#"������ ���"���� ���������"���"�#�� ��#����������������#�������+���������A� "���� �����3
6 ��* �����#����"���"�#�� ��#������������#�����������$ ���"���"�#�� ��#������������#�����������
Manufacturing and Distribution Planning
8–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Document Types Tab
���������"�����#"����#�. "����+�� #��������#�#����
1. Purchase Orders
������������"���������� �#���#����������������#"����#�"��������##�����" ���������#�����+�� #��������+�� #��� ���"��2�
2. Work Orders
������������"���������� �#���#����*��������#"����#�"��������#�#����" ���������#�����+�� #��������+�� #��� ���"����
3. Rate Schedules
������������"���������� �#���#���#������� �����#"����#�"��������##�����" ���������#�����+�� #��������+�� #��� ���"�(��
Leadtimes Tab
;���+�#�� ���#"���#��� ����=#��#"���+���� ���"�����"�#��������#"����;�����������#��+" #����#������#���������
1. Purchased Item Safety Leadtime
1��"#����"#��#��*"���#����2��#�������������#����� ���������#������#�#���"#��H� ��� � ���#"���#���� �� �#��#���#�#� � ���#"���
2. Manufactured Item Safety Leadtime
1��"#����"#��#��*"���#����5��#�������������#����� ���������#������#�#���"#��H� ��� � ���#"���#���� �� �#��#���#�#� � ���#"���
3. Expedite Damper Days
�=���"#�������������������#�#"������#��������#"���#�#���#��������#"��"���+��#������.���+�����������#������
4. Defer Damper Days
��+�������������������#�#"������#��������#"���#�#���#��������#"��"���+��#������.���+�����������#������
Generating Multifacility Plans
8–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Performance Tab
���������"�����#"�����+"�����#��#������"�������������������"��#"���
1. Clear F3411/F3412/F3413 Tables
;��#�"�����"�����#"����"#���=#�������#"��I�-+�������#��$��� ������"�#���52�05)20�)2�5�����#�. ��71 :$$9��52�05)20�)2�<����<��� )�@�"����#�72���"��9�#�. ��71 :$�9������52�05)20�)2��������7�"����"�9�71 :$ 9�#�. �����������
(����#��#�"���������� ��.�� "�"#����-+��� #"� ��������#�"�������������# ���"#��#�"�����"�����#"����#�#��$��������� ��*������ #���������#����� �#������"���
A� "���� �����3
. ��* �����#�� ���#�. �$ � ���#�. �
2. Initialize MPS/MRP Print Code
-+�������#��$�"��#�"�����"�����#"����#���������"�"#"� "G������������"�#���-#���6�����#�. ��71:$��9�.���##"���#���-#����"� ��������75)2�9�#�. ��*�
-+����� �����#�"�+"� ��. ��*������"���#"���"���������������#����" ���#� ���#��������"��#���-#���6�����#�. ��71:$��9�
)���� ���+����������#�#�"�����"�����#"����+�������"#���"��#�����#�� ��#"���#���5)2��+"� ��"�����#�����+� ��3
� $�"+�������������#����#��
� ��"+��������������#��
����2"�#�5�#��2����#"��������� ��������7) :4�9�� �������#����#����#�� ��#"���.�������#���5)2��+"� ��
A� "���� �����3
. ��* �����#�"�"#"� "G��#���-#���6�����+" ��$ -�"#"� "G��#���-#���6�����+" ��
3. Messages and Time Series for Phantom Items
;��#�"�����"�����#"���#�����"+�����#���#��������������#�����������#"����"��+������#���"#���
Manufacturing and Distribution Planning
8–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
A� "���� �����3
. ��* �����#������#�$ �����#�
4. Ending Work Order Status
;��#�"�����"�����#"���#�����"+��#�����*�����#�#���#���"�������������� ������=� �����#����������#��-+����� �����#�"�+"� ��. ��*��� ����������=� �����#����������#�
5. Extend Rate Based Adjustments
;��#�"�����"�����#"���#�����"+�����#�����/�#���#�+���#��.����"#������=� �����#����������#��#���.�����#"���������+��#�����������#�
A� "���� �����3
. ��* �����#��=#���$ �=#���
6. Closed Rate Status
;��#�"�����"�����#"���#�����"+��#���#�#���+�� �����#������������� ��+�����#�C.����"#����#����#���������#�������#������#��#�����#��� ���C�#��#�#�������"����#�#��
Process Mfg Tab
-+�����������������+��#�"������#��$�#�������#��#���� ���.�������#��+����#��+�#�����C0.�C�����#�+��#�������������������#�������#�������+��#��������
1. Process Planning
-+�����������������+��#�"������#��$�#�������#��#���� ���.�������#��+����#��+�#�����C0.�C�����#�+��#�������������������#�������#�������+��#��������
A� "���� �����3
. ��* �"��#�$ ����
Multifacility Tab
���������"�����#"�����+"����"#�"��"������ #"C+��" "#�����"�����#�
Generating Multifacility Plans
8–23OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
1. Process Each Branch
-+��������� "��#"�����#����"���7.������ �#"���"�9�����#�"�����"����#"���#������������.�����+���#���6�����)� �#"���"��#�. ���#������ ��� #��#�.�������������"���#"���"����������"���#"���
A� "���� �����3
. ��* �����#�����������.����$ ����������.����
2. Date Branch
��#��#�����+�� #�.����0� ��#�+�����"���#���#"����#�������+ ����� ������-+���� �����#�"�+"� ��. ��*��#����� �����+�������.����0� ��#�"������������"���#"���"������
3. Consolidation Method
����"�� ������ "��#"�����#����7$9�����#������ �������������+������.�������� �� �#��������#"����"�������� ����#����� #�"��#������� "��#��.��������"+"���"��#������� "��#"���6���������"�����#"���
����.������ �#"���"����#����7�9����#���6�����)� �#"���"��#�. �����"�"#�����+�� #�
A� "���� �����3
$ "�� ������ "��#"��� .������ �#"���"��7��+�� #9
4. Run Regular Planning
-+��������� "��#"�����#����"�$�7"�� ������ "��#"��9����#��$�#����+���#�������#"������#���.����0� ��#�#��#����.�"������� "��#����#����"���#����#�����#���#���-+����� �����#�"�+"� ��. ��*��#�������������="#"���#"���"����#��
A� "���� �����3
. ��* �����#�"�� ����.����0� ��#�.�"������� "��#��$ "�� ����.����0� ��#�.�"������� "��#��
5. Consolidation Branch
-+��������� "��#"�����#����"�$�7"�� ������ "��#"��9����#��#���.����0� ��##�����#�"��#������� "��#����� #��-+�#������� "��#���.����0� ��#�� ����#�"��"#�����#"����"����#���#��#���#��"�"�� �����"��#���#�#� �
Manufacturing and Distribution Planning
8–24 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6. Category Code
-+��������� "��#"�����#����"���7.������ �#"���"�9����#��#�����#����������+�#�����#�#��#�"���� "���.������.����0� ��#�#�����#������������+"�������+"������#����������#�. ��
A� "���� �����3
$ :$02$� :$02� :$02 : :$02:4 :$024
7. Manufacture at Origin
��#��$�"+�#�����������+��#����������������"#���"��#���������#����������.�#������� �����#�#���.#�"��#�����������"#���+������#��.����0� ��#�����+������������������#���+����������"#���������*�����������������#���+������+��#����"#���
A� "���� �����3
. ��* ���#��#��+������+������+��#����������������"#��$ ���#��#��+�������� ��+����������"#��
8. Transfer Order Document Type
������������"���������� �#���#��#��+���������#"����#�"��������##�����" ���������#�����+�� #��������+�� #��� ���"����
Parallel Tab
���������"�����#"������"+��#������.���+�������#��#�#����#�������"������ � �����"�����������#"���� �����"+�����#���#����#�����������"�����"������ � �����"���
1. Number of Processors
;��#�"�����"�����#"���#�����"+��#������.���+��.�#���"��������������+�� #�"���7G��9�
2. Pre Processing
;��#�"�����"�����#"���#�����"+�����#���#����#������������"����"������ � �����"������"���������"����#����#�������*���� ����������������� ����� ��#���"#����"#�"����� ��������������2�����"��"��������+�������������������5)2�����"��� "���� �������#������.�
Generating Multifacility Plans
8–25OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�+�"#�����#�� ��� ������"� ��#����#���#�#� ����.���+�"#���"��#�����#�� ��#"����A� "���� �����3
6 ��* �����#���������#����������"���$ �����#������������"���
Manufacturing and Distribution Planning
8–26 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
8–27OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Working with Multifacility Planning Output
5� #"+��" "#��� ���"�����#��#����"#��+�"�+���#"���"��#���#"����"�����#��+�������������;��#���#"����"��"�+���#"���#���"#��������#�����"���#���� ���"���#��#�#����#�������#��>������ ����"���#���#��+�����������+��"��"�"��� �"#������.��#����#��"�����"�����#"����"+�����#��#����������#��#�*��
��*"����"#���� #"+��" "#��� ���"�����#��#����"#��+�#���+� ��"���#�*3
� )��"��"���#���#"����"��+��#����� #"+��" "#������� �
� 2���"���#��+������������+��#����� #"+��" "#������� �
Reviewing the Time Series for the Multifacility Schedule
;���"�����"��-�@�"��#����"���#���#"����"��+��#����� #"+��" "#������� �������� #"+��" "#������� ��"���������+�#"��C��������� �������������+�� ��#���"#������"���#��"���"����+���#�����#�����#�������#"�������#�����������2���"�����#"���"��#����)2052��������#"������������. �����#���#������" ������* ��������#� ��#"�����"���7.��*�#9�
-���� #"+��" "#��� ���"����#����#������#���+� ��"���@���#"#��#����"��#��#"����"�3
@�9- )�����#�#���������������� ��"����#�����+�����"#���
��"�@���#"#��#�������������#����������.����H�#"����"��
G�$ -�#�� ��#�����������"�@���#"#��#����"��"��#��#�����#�������
#��#�#����#���#��+��#��#������ ��.����0� ��#�+���
�������.����0� ��#�
Manufacturing and Distribution Planning
8–28 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%��'��������������������������
1���#���5� #"C1��" "#��2 ���"�����" ������#"��������78 :$:9���������"����"�0(�2�-�@�"��
�����*��"#���"�����"������� �#��#���+� ��"���+"� ������� "�*�1"��#�� ���#��#���#"����"��+�����"#��3�
� 6����02 ��#
� -#���D��.�
See Also
� �����#������2� �'�����
Processing Transfer Order Messages for the Multifacility Schedule
;����#�" �5�����)��"���#����"���#���#��+������������+��#���� #"+��" "#������� ���5� #"+��" "#������� "������#��������#��#��������"�#��#��#����������������� ��+��" "#"���-+����������#���������#����#�����#���#"�� �����#��#��+�������>�������#��+��"#���.�#����+��" "#"���"#����#���#����#�����*����
Working with Multifacility Planning Output
8–29OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����������������������������������������
1���#���5� #"C1��" "#��2 ���"�����" ������#"��������78 :$:9����������#�" 5�����)��"���
$� �����*��"#����#�" �5���������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���#��+������������+�����"#��3�
� �������6����
� -#���D��.�
�� ������#���#��+������������#��#��������#�#�������
� 1���#���)���������������2����5�����#�����#��#���+� ��"��3
� ���+������+��#���"#��
� 2�������������.��+��#����������� ��#
� �� ���������.��+��#������ ��� ��#
:� )��"���#���"�+���#"���+��#�����������"��#���+� ��"���+"� �3
� )�@��#���#�
� )����H������ �#�
� )����H���#�#���#�
� �#�#���#�
� ����D��.�
� �������6����
� ���� ��6����
Manufacturing and Distribution Planning
8–30 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Multifacility Forecast Consumption
5� #"+��" "#��+����#�������#"���"��5�#�"� �)�@�"����#�2 ���"���75)29�"�������#��������#���+����#�@���#"#��#������#������.���+�� ����������"����������������� ��+�+����#�������#"���"�#�����������+����#@���#"#��.�����#��#����#���#�#� ��+�� �����������"�������������+����#�@���#"#��"����������"#���+� ������#"� ���1���=��� ��������#��� ������@���#"#��"����#��#����#���+����#�@���#"#���#����#���+����#@���#"#��"�+� ����������
Time Series Quantity Types
�����#������#���+� ��"���@���#"#��#����7 :0E�9�+���� #"+��" "#�������#"��3
G��$7 1"��"�#�� ��#�7����/�#��9����"�@���#"#��#���������#
����+��#��+��� ��#��#�#����#��������#�����"
@���#"#��������#����� ���"���������#��"������
���������=���"#�������+��#�������
G��$ 1"��"�#�� ��#�����������"�@���#"#��#���������#
����+��#��+��� ��#��#�#����#��������#�����"
@���#"#������ ���"���������#��"��������������
�=���"#�������+��#�������
G �7 ��#� �"���������#��������7����/�#��9����"�@���#"#�
#���������#�#���#�#� �@���#"#��#��#�#����#������#�
�������+����#�������������+����#�������#"���
������������������#�����������#��+����#
@���#"#���+���=��� ��#���8���#������ ���"���� ���'�-;
"�#���@���#"#��#��#�#����#����������#�����������
��"�@���#"#���"��#����"��#���#�"�� ����"�#�� ��#
�������7'-������'1-�9��-�#�� ��#�����������������
#���-�#�� ��#������������"�����#"���+��#���5�#�
2 ���"��������� ��������7) :� 9�
G � ��#� �"���������#�����������"�@���#"#��#���������#
#���@���#"#��+����#������������+#��#����#�����
+����#�������#"��� ��"��
G�$ -�#�� ��#�����������"�@���#"#��#���������#�#��
@���#"#���+��������#��#�#����#��������#��#������#
���#���+��" "#�H��@�"����#�
Working with Multifacility Planning Output
8–31OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Calculations
-+�#���-�#�� ��#������������"�����#"���+��#���5�#��2 ���"��������� ��C5� #"� ��2 ��#�������7) :� 9�"�����#���#��+�������������#������ �� ��#H�+����#�������#���������#�� ���#���#��+���������"��������#�����#���+� ��"����� �� �#"��������#���-�#�� ��#������������"�����#"��"���3
� C�-;�?�7C��;9�O�7C-�9�O�7C1-�9
� O2<��?�7C1���9�O�7C�-9
-+�#���-�#�� ��#������������"�����#"���"��++��#����#���������#��#��+�����������"#"��� ��������+��#������ ��� ��#�������#������#��+� ��"����� �� �#"��������#���-�#�� ��#������������"�����#"���"��++3
� 7�-;9�?�7C��;9
� O2<��?�7C1���9�O�7C1-�9�O�7C�-9�O�7C-�9
Additional Options for Multifacility Forecast Consumption
��������"�#�� ��#���������������+����#�����������#����������#��+�����#����#��;���#�. ��:�0�1�������#���#���������� �#���"�C���+"���#��+������#�������� �#��"��#���C�F-2�@���#"#��#�������" ��#" ��"���#������#���������+����#��( ������� ���+�#���-�#�� ��#�����������"�����#"����#����#���������"�#�� ��#�����������"#��# �����#��#�������"�� ���������������+"����������1���=��� ���"�#�� ��#��������"#������������������#��������+����#�
-+����������#����#�#�����#�������@���#"#��#���������������*����������+�#�� :0E��#�. ���"#��#����������@���#"#��#����������#������� �#��#���#���� �� �#"����.�#�������#��"� ���#�������#���#"����"��������#����"� ��#���+� ��"����� #����������������#���+� ��"���@���#"#��#���3
G��$7 �����#���������#��"#��#�������#��#���#"����"��
G��$ �����#�������#�������#��#���'-��@���#"#��#����
G �7 �����#���������#��"#��#�������#��#���#"����"��
G � �����#����"#��#�������#��#���'���@���#"#��
Manufacturing and Distribution Planning
8–32 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Supplier Scheduling
Manufacturing and Distribution Planning
8–34 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
9–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Supplier Scheduling
��##"��������� "������� �����"���������� "���"#�����"#��#��"��"��"�+���#"�������������������������+" ��#������#�������� ��+�/�#C"�C#"�������#"��������� "�����;"������ "������� �����. ������#�������#�����)2052�05)2�� ���"�#������ "#"���"��"�������� ��
���� "������� "������"#��+�#���+� ��"���#�*3
� ��+"�"������ "�����#��#
� 8����#"������ "������� �
� )��""������ "������� �
� )� ��"������ "������� �
� 2"�#"������ "������� ��7��#"��� 9
������� "������� ��"���#"+"��.�#����#C����� ���C#��������+���������"#����#�����+��" "#���>���.������"�#�"��#"�� ��"�+���#"���#�����"#����#��#�#������"�#���������#���� ����������������������� "�����#�������������� "������� ��#��� ���#��"������#"��������"��"������� ��
>����#����������"�#�"����� "������� ��#�3
� �����#�"#��C���"+"��� �#"���"��+������� ����"����#��#�#����� "�H�"#�
� ��#����. ��*�#������������������#�"� ��"��"�����������#��"#��������� "�
� 8����#�����"��"�������� ��+��� ���� "�C����� �����������"#�"������ ������"G��
� 8����#���� #"� ����� "������� ��+����"�� ��"#��
� (�/�#�#����"��"�������� ��+����� ����������#��������#��. ��*�#����� ���
Manufacturing and Distribution Planning
9–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
>����������#��������������2�������#��#���#��� �������������. ��*�#�����"#��������� "��
"���������� �������# (�. ��*�#�����"���#���"��������������#��#����
"���#������� "��+���� ����@���#"#���+�������"#����
���"+"���� "������#�������������+������ "������ "�
"#���.��"��"��#��������������2�������#��#��
�"#��#������#"����+���. ��*�#������>�����#����#���
. ��*�#�����+�������"#���#��#��������#�#������� �
+����� "���� "�����;����#��6 ��*�#�����"��#��
2�������#��#���#����#��. ��*�#�����+���"#���
>���������"���� �. ��*�#�����+����"�� ��"#�������
�����#��������� "������� ������� "��� ���
����� "���� �������#���#������ #"� ��. ��*�#����
+��#���������� "��������#��������#����"@���"�" �
#���++��#"�"#����#��#����#��"���#�����#"�����������
�#������#���. ��*�#�������#����#���#�#���#�����
#����@��#�����#����#���������#��
"��������� �������
�������# >��������. ��*�#������ ����+����� "��#������
������"��"�� ��� ��������+���� "�����+������.�#
��#�� ���+�#�������������������������1���=��� ��
�����"��#�"�����. ��*�#������ ����+��$&�����"#��
+�������� "���-�����"#"���������"��#��������
�������#�#��#�*���� "�����+����#����������"#��+�#��
"#�����������#����#" �#�������"�+" ���������#��
���� "�������� "���������������#������
����#"����#����#��������#��������������
���"�#�#���. ��*�#������)���"�#�+��#��������#��
����������#���#�#� �@���#"#��#��#����"����������#��
. ��*�#�����
"������������������%�
�����#
�����++��#"�����#�������+����. ��*�#�����"����"+"��
.��#���.��"��"���������#����#������#����=�"�#"��
�@��#������#���
����+� ��"����=��� ����# "���#���#���#��#�����+� ���#�����#������� "�
����� �3�
1A .��� ��-����/����
��#���������+�����"+"���"#���+�������#"�� ����� "��+�������"+"���#������������������������"��(�����"��#���������� ���������
4A $�������������������
��+"���#�����#�" ��+��������#��#��"#��#������ "�����#�����#�0���������� "��-�+���#"���+��������&�������'�����������������
9–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5A $��������������������
��+"�����"������������ "��#�����"������"����#����&�������'��� �����������+
0A *��$*�3,��3,*�
)����)2052�05)2�#��� �������@���#"#"��"��#����+�#"�������@���#"#�������������������������.���� ����������
;A *�%��',�����������,*�
)��"�����=���"#�����+���������� ������+�#���5)2������+���!��"���#����������������
6 ���������������������-�������
��+"����������� "#������#����.�#�������� "��.��"#�������&�������'�������'����������������
8A !���������������������
8����#������+#��+�������� "������� ���"��#������"##"���#����+"�� ����� �����������������'�������'���������
<A *�%��'���*�%�����������������
;���#���#��C����� ���@���#"#"��#���������#��+�� �#C�"��#��������#��#�������� ���������������'�������'���������
=A ���%����*��������������������
)� ����@���#"#"��+���#���. ��*�#������������#�������������+�� �@���#"#"���"#�"��#���� ���. ��#"���+������������������'�������'��������+
12A ��������������������-�������
2"�#������#����"���#����"����#������ ������#���� ���. �@���#"#"���������������'�������'��������
Manufacturing and Distribution Planning
9–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+� ��"�������"��" �#�#������#����#������. ��*�#��������� ���3
Purchase OrderQuantity 2,000
Blanket Order
Open Quantity 16,000
Blanket OrderRelease
Open Quantity 16,000Shipment Pattern Weekly
Supplier
16,000
9–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Defining Supplier Contracts
>�����#���#��#���#����+��������#��#��"#��������+�������� "�������#������#�������#��#�#���#�������#��������"�#�"����� "������� ���
-�����"#"����"+��������#�#�������#���� #"� ����� "������� ��+����"�� �"#����������#���+"����������� "#������#����.�#�����#������ "��.�"#���
���� �#��#���+� ��"���#�*3
� ��+"������ "�����#��#�"�+���#"��
� ��+"����"����#���##��
� ��+"������ "��� "#������#���
Defining Supplier Contract Information
�����������+"�������� "�����#��#����������� ����+"���#"���+�������"������ ���+��+��G"����� "����@���#"#"���� ���. ������� �����������+�#���@�"����#�
��������������#��������� ���#����#��3
� ��#�. ��*�#������ ����#��#������##���"���"�#�������"�#��#"����"���
� (����� �#����#�����@���#"#"������@���#"#"��#��#��������"�����"��#�#����@��#�����#��
� �=������#����������#�����"#"������.��"��#���2�#�����+"� ��
� �=������ �����"�#������#�"��#����� ��)���"�#�+"� ����������#�������#�#��#������� �#"������"����@���#"#��
���������������#��#�������� ���#����#����"� ���#���@���#"#"��"��#��2�#����������� ��)���"�#�+"� �������#�0����������� "��-�+���#"�������������� �#����� "��"�+���#"����#����#����� �#��#�����#"��������"�� ��"��#����"#���
Manufacturing and Distribution Planning
9–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Before You Begin
� ���#����. ��*�#�����+�������"#���#��#��������#�#������� ��#�������� "������� "��������������������"��(�����"��#���������� ��������+
��������������������������������
1���#����)2���5)2���" ������#"��������78 :$$���8 :$ 9���������#�0����������� "��-�+���#"���
$� �����*��"#��A����������� ��5�#������� �#��#���+� ��"���+"� ������ "�*�1"���#����������� ��"�+���#"���+������� "������#���. ��*�#����3
� ����D��.�
� <"���D��.�
� �����������
� ��������
�� � "�*�(���
Defining Supplier Contracts
9–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ���A����������� ��5�#��)��""�������� �#��#���+� ��"���+"� �3�
� A����������� ���0�05
� )� ���. �����
-���#"+��#�����"����+�#"���+���#��������#"���#�#���#��#��#������������" �.�����#���+��. ��*�#������(���@���#"#"�#��#��������� �����#"����+�#�"���"������#" ����"�����"�� ���"���#�#�����������#����������#�� ������������
:� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*��T3
� �� "���#��<���#"��
� ��"����#�E���#"#�
� ��"��;�"#0���#
� ��"����#�<���#"��
� 1�G������
����"+��#���#"���+����+���#��������#"���#�#���#���"#�"����"���� "��"�����+�G���
� 1�."��#"������
-���#"+��#���#"�����"���+���#��������#"���#�#���#����"#�"���"���#�����#���������#���+�."��#"�����#�+��#���@���#"#"�#�������������#�������� ��������"+�#�������"������ ������"� ��"���#"��� �
Manufacturing and Distribution Planning
9–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� )���5�#�"� ����
-���#"+��#���#"�����"���+���#��������#"���#�#���#����"#�"���"��������#�"� ���#���������#����.��#�����#����������"+#�������"������ ������"�� ��"���#"��� �
� A�����<�#��"G�
����� /&��������
A����������� ���0�05 �������.���+���*��������*��������#��#��#��" �.�
�"� ��������#������ "������� ��
)� ���. ����� (�#"���+�����#��#�"��"��#��#������.���+���*����+��
#��������#"���#�#���#��#����������"���#"+�"���#��
��#�++���#��+����#�� �. ��*�#������ ����������#��
���#���#"���+����������#������ "������� ��� ���
�����#"���������"����
�� "���#��<���#"�� ���� ���#"������"����#���� ��.���� "�����#����������
��#"�� �����"�"������*�����*����#��
��"����#�E���#"#� ��"�"�#���@���#"#��#������ "��"��" "���#���"�����
�"�"����
��"��;�"#0���# ����#������@���#"#���+����#�"���#��#��������"��#��
����+��#�"��������7#��"�� ���"�������#"#"��
����+��#�"������"�����#9������@���#"#��#��#�������#�
��#��"���#������.���+�.������� �.� �#��#������"
�����+���"��"����-#�� �����"+"������� ���
@���#"#"��
*�� ,������������� �����+++++++++++++ ++++++++++++++
-���#"+"��#������#�"����@�"����#��+�#������ "��
�����#����#��������#��#������ "������� ���"#
�� �� �#��#����"��"�����"#�������#�"��������� #"� �
������/�#�#���� ������@���#"#"�����������
��"����#�<���#"�� ����#"���"#�#�*�����"����#�#�������+���#������ "�H
���*�#��#�����#���H����*�������#������#�"��� ��
#���++�#�#����@�"�����#��#����#��"���#�����#�� ���#�
#��#�#����"����#���� ��#�*��� �����( ��*������
���"#��"�������� ��� � ���#"���+������������"#��
��� ��"�� ����#����"����#� ���#"���
1�G������ �������.���+���*����+���#��������#"���#�#���#�
#��#�#���@���#"#��.��*�#��" �.��+�G����"#�����������
����� ������". �����"��� ���"�� ������#���� �� �#�
#������� �#"���+�G���@���#"#��7����1)�9�
1�."��#"������ �������.���+���*�����+���#��������#"���#�#���#��
#��#�#�����#���������#���#���+�."��#"�����#�+��#��
@���#"#��������
Defining Supplier Contracts
9–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
)���5�#�"� ���� �������.���+���*�����+���#��������#"���#�#���#��
#��#�#�����#���������#���#��������#�"� ���#�+�
#���@���#"#��������
A�����<�#��"G� (��� ���#��#�"���#"+"��#��� �#�"G���@�"����#��+�#��
��� "��������#����#��������#��#������ "�
����� ���"#��� �� �#��#��������� �#�"G�������� #"� �
������/�#�#���� ������@���#"#"�����������
Processing Options for Vendor Schedule Master Revisions
Versions
Enter the version of each program. If left blank, ZJDE0001 will be used.
1. Purchase Order Header, ____________ Purchase Order Header (P4310) 2. Purchase Orders, Work With ____________ Purchase Order Detail (P4310) 3. Supplier Schedule (P34301) ____________ 4. Supplier Split Percentage ____________ (P43211)
Defaults
1. Enter the Document Type to ____________ display.
Defining Shipment Patterns
>�����#���+"�����"������������ "��#�����"������"����#��>���������+"������##���#��#�������#���+�@�������+���� "���� "��"���1���=��� ������������+"��������+�#���+� ��"����"����#���##��3
� ( ���*���
� �����5�����
� 5������#������1"�����+�#���+"#�����#�"�����*��+�#������#�
��+"�"����"����#���##������"#��+3
� ���#"����"����#���##��
� )��""����"����#���##��
Manufacturing and Distribution Planning
9–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���������������������
1���#����)2���5)2���" ������#"��������78 :$$���8 :$ 9���������#�0����������� "��-�+���#"���
$� �����*��"#��A����������� ��5�#������� �#��#���+� ��"���+"� ������ "�*�1"���#�� ���#���� "������#���. ��*�#����3
� ����D��.�
� <"���D��.�
�� ������������������ "�*��� ��#�
� ���A����������� ��5�#��)��""������������"����#�2�##���+���#��1��������
:� �����"����#�2�##���)��""�������� �#��#���+� ��"���+"� �3
� �++��#"���1��
� ���
4� �����������������+�#���+� ��"�����#"����������"�����3
� ������
� 5�����
� ������
� ��������
� ������
Defining Supplier Contracts
9–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� 1"���
� ��#����
&� ( #���#"�� ��������������+�#���+� ��"�����#"����������"�����3
� �����+�5��#�
� ( ���*����
!� �����������������+�#���+� ��"�����#"��� �+"� ���������"�����*3
� ���*�$
� ���*��
� ���*�
� ���*�:
� ���*�4
E���F����*�$�.��"���"#��#���+"#������+�#������#���1���=��� �������*��"��#�.�����������#�������������
�� ( #���#"�� ������� �#��#���+� ��"�����#"��� �+"� ���������"�����*3
� )������������*�79
%� � "�*��T�
E���3������#��������#�����"����#���##������"�������������"���.�#�*"�����1����="#�#����"����#���#���5��"+"��#"���#��#������ �������#���"����#���##�����������+���#�����*��"#����"����#���#��+���
����������C��#��#�����"����#�2�##���)��""���+����� ��� ������. ��*�>���������������+�#���+� ��"��3
� ��#�������� ������������#���������"����#���##��
� ;��#�����*��"#����"����#���#��+���#���"� ���#�������#��"����#��##��
����� /&��������
�����+�5��#� �����+�#������#��7�$�#��� $9
( ���*���� (������+��� ��#"���� ���*�����"�������*�
)������������*�79 (������#��#���#��"���#������* ����##���#��#�#��
�#���.�" ��.�������#����++��#"���+�����#��
A� "���������3
$ ��������*�"������ ��
� ��������������*�"������ ��
Manufacturing and Distribution Planning
9–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%�����������������
1���#����)2���5)2���" ������#"��������78 :$$���8 :$ 9���������#�0����������� "��-�+���#"���
$� �����*��"#��A����������� ��5�#������� �#��#���+� ��"���+"� ������ "�*�1"���#�� ���#���� "������#���. ��*�#����3
� ����D��.�
� <"���D��.�
�� ������������������ "�*��� ��#�
Defining Supplier Contracts
9–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ���A����������� ��5�#��)��""������������"����#���#��+���#��1��������
:� �����*��"#����"����#���#��������������������� "�*��� ��#�
4� �����"����#���#��)��""������"���#����"����#���##����-+����������"��#�����##���.������ �#"���#���+� ��"���+"� ��+����������"��#�����#�3
� ��"���. �����
Defining Supplier Split Percentages
6�����+#�������#�������"#���+����� #"� ����� "��#�����"��� �"�������"�� ����� "������� "������� "���� ����� #"� ����� "��#����� ����"�� �"#���.�������������#��"����� "#������#�����;������ "���� "#�2����#���#����+"���#���� "#������#����������#������ "��
Manufacturing and Distribution Planning
9–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���������������������������
1���#����)2���5)2���" ������#"��������78 :$$���8 :$ 9����������� "���� "#�2����#����
$� �����*��"#������ "���� "#�2����#��������� �#��#���+� ��"���+"� ������ "�*�1"���#����+"���� "#������#������������� "�3
� 6����02 ��#
� -#���D��.�
�� ������������������ "�*��� ��#�
Defining Supplier Contracts
9–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ������� "���� "#�2����#����)��""�������� �#��#���+� ��"���+"� �3
� (����D��.�
� ���"�#"��
� �� "#�2����#
� �++��#"���1��
� �++��#"������
:� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*��T3
� (��+���#�
� 6�����2 ��#
����� /&��������
�� "#�2����# ���������#������� "���
1������ ��)� ���������� "��3�����������#�����+�#��
� ������@���#"#��#��#�#����#������ "��#��#��
�������"������ "�������#�#� �� ������@���#"#����#
�@�� �$��Q���#���"���#����#����"� ��������
������
Manufacturing and Distribution Planning
9–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
�++��#"���1�� (���#��#��#�"��"��#�������+�#���+� ��"��3
� ���������������#���#�����"�#���++��#������." �+���#�"�
� ���������#"���#�������"�#���++��#�����@���������#�����#"���+�����"#��
� ��������#������� ��"�"���++��#
������+�� #�"�#�������#��#�����#���>���������#�
+�#����++��#"�����#����#��#�#����#���� ���+�
�����"�����������-#���#��#������� ������++��#"���"�
#���+�#�������#" �.������������������"G���"��2����#
��#"���������1 ���5��������#�����������"#�
)�@�"����#�2 ���"��������5�#�"� �)�@�"����#
2 ���"����#�����#��"����� "����������#�.�
�++��#"�"#����#�����#�.��#���." ��+���#�"� ���""��� ��� �
�����+����"� �����#��.�������#����++��#"�"#����#�
������#��
�++��#"������ (���#��#��#�"��"��#�������+�#���+� ��"��3
� ���������������#���#�"���� �����"���++��#�����." ��+���#�"�
� ���������#"���#���"���� �����"���++��#�����@���������#�����#"���+�����"#��
� ��������#������� ��"���� �������#"��
������+�� #�"������.�� $��+�#�����+�� #�������+"����"�
#�����#���"�#"�����+�����#����������>����>������
��#��+�#����++��#"�����#����#��#�#����#���� ���+�
�����"�����������-#���#��#������� ������++��#"���"�
#���+�#�������#" �.������������������"G���"��2����#
��#"���������1 ���5��������#�����������"#�
)�@�"����#�2 ���"��������5�#�"� �)�@�"����#
2 ���"����#�����#��"����� "����������#�.�
�++��#"�"#����#�����#�.��#���." ��+���#�"� ���""��� ��� �
�����+����"� �����#��.�������#����++��#"�"#����#�
������#��
9–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Generating Supplier Schedules
1���#����"�� ���"#��2�"��"��2 ���"�������#"��������78 :��9�������8����#������ "�������� �+
;��#���8����#������ "�������� ��#���������7���9�#�������������#��5)2��-+����������#����#���8����#������ "�������� ������������������������������������� ��������#���������#��"� ���#������������#������� ��#��#������ "��
��������������#��#������ "������� ���#����#������#���������+��#�����#�����#�5)2������#"����. ��*�#����������#���"�+���#"�����+"����"�#������� "�������� ��5�#��#�. ��#�����#������� "������� ��������#����#��"����������+���#���5)2�������
>��������#�#��������"�#������"�����#"���������� "�������� ��8����#"��#��� ���5)2��������+#������� �������#"���������#���� ����� ��#���������"�"���#���� ���. ��#"���+�����
�������3������#��������#��������������#����#�����������#���#���+���5)2�
��������������#������� "������� ���#����#������#������+#��+������� "������� �������"�#������#�#��#���#�" ������"������"��#��#��"��#��*��������� "������� ��"��++��#"����>���������"���#�����+#��+������� "������� ���"�����#�0������������� ��������*��������������""����"��#������"##"���#����+"�� ������ ��
-+���������� #"� ����� "���#����#������#���� #"� ����� "������� ��+���"�� ��"#����-#�������.��� "##"���#���5)2�������.��#��������#����#��#������+"����"��#������� "���� "#�2����#����#�. ��71: �$$9�
>������������"��#���������� �#����#���+����� � �����"����-��#����� � �����"�����#�����#����#���� ���"#���"�� #����� ��.���"���� #"� �����������"���#����#�*��� ������������#����=���#����.�#�����������������#��#��������#���������������������� � �����"����#�������"����"��"+"���#���+���������"�����"������ "�"#����� ��.��#��
���.���+�������#��#�������" �. �������������
(�����#���.�#�����"���"����#���#�������� � �����"����-��#�"��"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������������#������#����������#���=���#��#���.�#�����"���
Manufacturing and Distribution Planning
9–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Before You Begin
� A�"+��#��#�#���+� ��"���"�+���#"������.�����#���3
� �����)2���52���#��
� (����#"���. ��*�#�����+��#���"#��
� (��"�#������ "��"�+���#"���+��#������
� ����. ��*�#����������#����� "���#���������#�#��"��#�����"����+��� �0�������"�� �"���� ��#��#����������"������ "������ �������#"��
� )���#���52�05)20�)2������#"�����#��#�#����#������3
� ���#������������+����� "������� ���"#��
� 2��������#"��C�"����#�"� �� ���������������� �G��#���"����#�+�����"���#�������#����/��#�� ���"�������#"��
� )��"���������+���#���5�������#�" �+��
See Also
� �������������������������������
� '�������������������'���� �
� ����������'�����,$���������'��������
� !��"���#����������
� �����#�����2� �'�����
� ��������'�������'��������
� �455667'�������'������������������"��#����������������+�������#��� �
Processing Options for Generating Supplier Schedule Report(R3440)
Defaults Tab
���������"�����#"���� �������#�����"+��#��������#"���#�#���#���������#�#�����������"�����"����+�#������ �0�������"�� �"���� ��#��##����#��������������������#������� "������� ��
Generating Supplier Schedules
9–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
1. Generation Start Date
;��#�"�����"�����#"���#�����"+��#�����#��#��#�#����#������#��#�#�#������ "�������� ��8����#"���������-+����������#����"+������#���#����#�����#�������#���#��
2. Document Type
;��#�"�����"�����#"���#�����"+��#����������#�#����+����"���#��������������+�����"#��H�. ��*�#�������"���#������� "�������� ��8����#"��������-+����������#����"+��#����������#�#�����#����#�������6�7. ��*�#���9�
3. Supply/Demand Inclusion Rule
;��#�"�����"�����#"���#�����"+����"�����"����+�#������ �0������"�� �"���� ��#����#����������"�� ����+"���#����"#�"��#��#�#�����������#��� ��#�. ��*�#�����#�����#������ "������� "��������
Process Tab
���������"�����#"���� �������#�����"+������#����#���� ����������������#��#�������� ���-�����"#"���������������"+��#���������"����"���#���#������������
1. Supplier Schedule Status
;��#�"�����"�����#"���#�����"+��#�������� ��#�#���+#��#����#�����#������� "�������� ��8����#"����������-+����� �����#�"���#"���. ��*��#���#���������#�����#��#�������� ��
2. Clear Messages
;��#�"�����"�����#"���#�����"+�����#���#����#���� ���52�05)20�)2�������+#��"#����#������� "�������� ��8����#"���������7) ::$�9�A� "���� �����3
6 ��* �����#���������#�� ����������+#��#������� "�������� �8����#"������������
$ �����#���� ����������+#��#������� "�������� ��8����#"�����������
3. Regeneration Flag
;��#�"�����"�����#"���#�����"+�����#���#����#����C���#������� "������� ��8����#"��������������#����#���������"�� ��� ����52�05)20�)2�������������#����"� ����������� ���+#��#���5)2)������#"����������������A� "���� �����3
Manufacturing and Distribution Planning
9–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6 ��* �����#������� �����������$ �����#���������#����� �����������
4. Frozen Days Flag
;��#�"�����"�����#"���#�����"+�����#���#����#���"�����#���+�G��#"���+�����+����� "��� ��������� ������� �����#"����"#�"��#���+�G��#"���+������-+�#����#���"�����#���+�G���#"���+������"#�� ����@���#"#"��"#�"��#���+�G���#"���+������A� "���� �����3
6 ��* �����#���������#�"�����#���+�G���#"���+������ �����#���"�����#���+�G���#"���+�����
5. Transfer Order Messages Flag
;��#�"�����"�����#"���#�����"+�����#���#����#���"�����#���#��+�������������" �������#"���#�������� ���-+�#����#���"�����#���#��+������������"#������ ��@���#"#"���� ��+��#��������������������A� "���� �����3
6 ��* �����#���������#�"�����#���#��+������������� �����#���"�����#���#��+������������
9–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Revising Supplier Schedules
>���������"���������"��#������ "������� ��#��#����������#����1��=��� ��������"��#������#�����"����#��C����� ���@���#"#"��#��������#��+�� �#C�"��#���������#��#�������� ��
(+#��������"���#�������� ��������*���������������""����������#�����#�#���"�+���#"��������#�0������������� ��#������"#�#����+"�� ������ ��
��#�0������������� ��� �������#�3
� )��"���� �������� �����������"#�"�� �@���#"#��"�+���#"��
� �"� ���#�������#���� "������� �
� )��"������� �#"���@���#"#��"�+���#"��
� ;���#��� ������@���#"#"��"��#�������� ��.�+�������� ����#���
� 1"�� "G��#������ "������� �
����2 ������+"� ��"�#����� ��+"� ��#��#�������������������#���(��0������������ ��+���������#������ �� �#��#���@���#"#"��"��#������� �#"���1�G������� �#"���1�."��#����������� �#"���)���5�#�"� �+"� ����������������"�����
(����������#��#�������*��#��#�������� ���" ���#�++��#�#�����#�����#�52��5)2�����)2������#"����(+#������� ����#������ "������� ���������#������������+��#���. ��*�#������ �����#�����=#�52���5)2�����)2�����#"���#��#�#�������������������" �. ����� ��"#���
Manufacturing and Distribution Planning
9–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���%��������������������������������
1���#���5)2���" ������#"��������78 :$ 9���������#�0������������� �+
$� �����*��"#��A����������� ������� �#��#���+� ��"���+"� ������� "�*1"���#���"� �������������. ��*�#�����#��#��="#�+��#���� ��#��"#��3
� -#���D��.�
� 6����02 ��#
� (��+���#�
�� ������������������ "�*��� ��#�
� ���A����������� ��)��""������"���#���+� ��"���"�+���#"��3
� ���� "�
� ��"��D��.�
� �� "���#�
� �#�#�
� 1���6�
� <�#�) �2���
� <�#�)���"�#
� )���"�#�E#�
� ����)���"�#
Revising Supplier Schedules
9–23OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ����1�G��
� ����1�."��#�
� ����)���5�#�
:� (����#�#��������.��� "�*"����T�������� �#��#���+� ��"���+"� ��#�����#��� ������@���#"#"��"��#�������� ������#����� "�*��T3
� 2 �����
����� /&��������
���� "� (����.��#��#�"���#"+"�������#��"��#���(����6��*
�#����;��#�"����.��#��"���#"+����� �����
��� "���#����#"�"���#����#�������� "���#����#���
���#"�������������#��������.��*����.��
��"��D��.� ���������.��*����.���+�#�����"�����"���"
���"+"���.��#�����#������.����������"G�#"����>��
�"��#����#�"���"��.�������+���#���@�"����#��
���"� ����� "����@�"����#�
�� "���#� ���� ���#"������"����#���� ��.���� "�����#����������
��#"�� �����"�"������*�����*����#��
1���6� (������+"���������7:�01)9���"���#"���#�����#����.�
��"������ "���"����#������ "������1���=��� ���#��
��� "����� ���� "���#���������*����������� ���"�*���
#����"����#��#�#������ "�H����*�
>�������� �����#���������#��"��"��#��������
����"." "#��+��+�"��#��������1���=��� ����������
������������"��"��#"���#��#�#�����#���� ��� ��#�*�
���"����+��������������#���� �����#������ "�
������������"�����". ��+��#����#�#"��������
#��#�����#"��#"���
-#���D��.� (����.��#��#�#����#����"���#�����"#����-#�����.��"�
��#�� �������#�"��"#������.��+���#�
1���������*������#���"#������.��"�#��������
6����02 ��# -���#"+"����.�������� ��#�
D���3�>���������#�����.�����������#��"��#�"
+"� ��������#���"��#C/�#"+"��#����7+���=��� �����$�
��������S�S�S���$� 9��>��������#� ���#��.�"�����"#
+����"�����������������#��"#��
(��+���#� �������"����"����#���#��+���"#������ �������
������������������� ���������������������
#�"���#��#���� �� �#�����" �. ��#�����"��7(�29
"�+���#"������"��� �������.����#���#"�� ���� �� �#��
��"���� ��������#�����"���#�������#�#�������#��#
#���"#�������.���"�����+���#�����������
Manufacturing and Distribution Planning
9–24 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����� /&��������
�#�#� ��������#�#�#���+�#������ "������� �����"�"
����#�����#�������� �������#������#����#���
<�#�) �2��� (����.��#��#�"���#"+"��#����"�"�� ��������#���������
��������"���"��������� "��������/���� ���#��������
���������#��+�������������"���#����"�"�� ��������#
���.���� �#�#����#����"���"#�#������D�=#�D��.��
5�#��"����������#�7���59����.��"���#"+��� �#��
�������#�"��#���(�����#�)���"��. ������(�����#
2���. ���#����������=��� ����3
� (�#���#��05���� �2�����#�"�"�� ��������#�C�A�����5�#��"����������#�C�2�����#
� (0)��"�"�� �-���"���"�"�� ��������#�C�-���"��
� )���"�#�(�� "��#"���"�"�� ��������#�C�-���"��5�#��"����������#�C�)���"�#
� ���"#�5���0(�/�#���#�"�"�� ��������#�C�-���"��5�#��"����������#�C����"#�5���
� ;���� "���)���"�#�"�"�� ��������#�C�)���"�#
<�#�)���"�# ������#��#��#�#��� �#��"����#��+�#���"#���������"����
)���"�#�E#� ����@���#"#�����"�������#�����#�����#��"����#�
����)���"�# ����@���#"#�����"����#����#�����"�#���. ��*�#�������
����
����1�G�� )�� #�"������ �� �#"���
����1�."��#� )�� #�"������ �� �#"���
����)���5�#� )�� #�"������ �� �#"���
Processing Options for Supplier Schedule Revisions
Versions
Enter the version for each program. If left blank, version ZJDE0001 will be used for 1 through 7.
1. Open Order Inquiry ____________ (P4310) 2. Supply/Demand Inquiry ____________ (P4021) 3. Purchase Order Entry ____________ (P4310) 4. Vendor/Blanket Information ____________ (P4321) 5. Pegging Information ____________ (P3412)
Revising Supplier Schedules
9–25OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6. Supplier Schedule Release ____________ Generation (R34410) 7. Item Branch (P41026B) ____________ 8. Enter the version of ____________ Supply/Demand Inclusion Rules to use for active Blanket Order selection
Defaults
1. Enter the Document Type to filter on the form
Document Order Type ____________ 2. Supplier Self Service ____________ Functionality
blank = Bypass Supplier 1 = Activate Supplier Self Service functionality for use in JAVA/HTML
Status Update
1. Enter Status for Vendor Schedule Update
Vendor Schedule Status ____________
2. Enter status beyond which changes cannot be made to the Vendor Schedule. If left blank, the schedule will always be open to change.
To Status ____________
Manufacturing and Distribution Planning
9–26 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
9–27OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Releasing Supplier Schedules
1���#���2�"��"���"�� ���"#��2 ���"��������78 :��9��������)� �������� "������� ��
(+#������+"�� "G��������� ���"�����#�0������������� ������������ ����#������#���� "������� ���(+#��#�������� ��"���������#����#�������#�#���� ������@���#"#"��"�"���#���#"���+�����
����)� ���������������##���"����������������="#"���. ��*�#������������ "��� ����"�+���#"���#��#�"����"+"��#�������. ��*�#�����#�����#�3
� 2���������������#���+���. ��*�#������ ����+��� �@���#"#"�#��#�����������"�"���#���#"���+����
� (��"��"�������� ��.���������������������#���"#����#����"��"�� ���#"���������#�����+"������"�. �
� (�"�� ��������������"#���� #"� �� "���+��������"++���#�� ������#������� #"� �� "���+�������"#���� �����+��#������ "�
>������������"��#���������� �#����#���+����� � �����"����-��#����� � �����"�����#�����#����#���� ���"#���"�� #����� ��.���"���� #"� �����������"���#����#�*��� ������������#����=���#����.�#�����������������#��#��������#���������������������� � �����"����#�������"����"��"+"���#���+���������"�����"������ "�"#����� ��.��#�����.���+�������#��#�������" �. �������������
�����#������#��������#���.�#�����"���#�������� � �����"����-�#�"���"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������#��#�#����#������#���=���#��#����.�#�����"���
Before You Begin
� 8����#��������#���� "������� �����������������'�������'��������+
See Also
� ��������������������������������+������"�+���#"������������� � ����"�����*
� �455867'�������'�������������������������"��#����������������+������#���� �
Manufacturing and Distribution Planning
9–28 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Supplier Schedule Release Generation(R34410)
Defaults Tab
���������"�����#"���� �������#�����"+������+�� #��� ���+�� "���#����.��"��"���#�#����������#�#���������#�=�����
1. Line Type (Required)
;��#�"�����"�����#"���#�����"+������+�� #� "���#�����<"���#�������#� ����#����#��������� "��������#����#"�������� "���#�����++��#�#����#���"#����"���#���#����#"���"�#�+�����������8���� �(�����#"������.���#�(�����#�2���. ���(�����#�)���"��. �������-����#���5��������#������ "��#����� �����"+"��#�������"#"���+��"�� ��"����� "���������#�����"��� �� �#"��������+� ��"�������=��� ���+��� "���� ���#��#�#����#�������+"�������#���<"�����������#��#�)��""��������3
� �#��*�"#���� ��.���#���.���#��#���������"���#��#���8���� �<����6 80<�������#�����"#������.�D D���#��*�"#��1 1�"��#� ��=#�"�+���#"��5 5"�� �������������������"#� ��*����
�����#������ "���#������ ���#�����#�������������������������#������ "�������� ��)� ����8����#"���������
2. Beginning Status (Required)
;��#�"�����"�����#"���#��"��"��#��#���"�"#"� �#�#���+��������������#��##����#��������#��
3. Document Type
;��#�"�����"�����#"���#��"��"��#��#����������#�#����+��������������#��#�#����#��������#���-+����� �����#�"���#"���. ��*��#����#������#���������#�#����+���������������7�29�
4. Default Tax Area
;��#�"�����"�����#"���#�����"+��#�����+�� #�#�=������>����������#���#�=����#��#�"��#����"��#��������.��*�+��#������.��"��#�����"�����+"� ���#���#��������.��*����.��+��#������ "���A� "���� �����3
6 ��* �����#������#���#�=�����+���#������ "�������.��*����.��
Releasing Supplier Schedules
9–29OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
$ �����#������#���#�=�����+���+��#����"��#�������.��*����.��
Process Tab
�������#"���� �������#�����"+��#�������"���#����#������#�������#�#������ "������� ��� ����
1. Supplier Schedule Status
;��#�"�����"�����#"���#�����"+��#������ "������� ��#�#��#��#�#���#����"����+#���������#������� "�������� ��)� ����������7) ::$�9��-+���� �����#�"���#"���. ��*��#����#���������#�����#��#������ "������� �#�#��
2. Clear Messages
���� "������� "������#���������+���#�����#�����#�5)2������#"���#���#��"�����������;��#�"�����"�����#"���#�����"+�����#���#��� ��52�05)20�)2��������+#��#����#������#������� "�������� ��)� ���������7) ::$�9�������#���� ����� ��#���������#��#����"�"���#��� ����+������A� "���� �����3
6 ��* �����#���������#�� ���������$ �����#���� ���������
3. Blanket Order Release
;��#�"�����"�����#"���#�����"+�����#���#����#�����#���#"�� ��� ���. ��*�#�������"���#������� "�������� ��)� ����������7) ::$�9��A� "��� �����3
6 ��* �����#���������#���#���#"�� ��� ����. ��*�#�����$ �����#�����#���#"�� ��� ����. ��*�#�����
4. Price Control
;��#�"�����"�����#"���#�����"+�����#���#����#����#"����#����"��+�����. ��*�#�������#���2�������#�2"���5��������#��#����A� "���� ����3
6 ��* �����#����#"����#����"���+�����. ��*�#�����$ �����#����#"����#����"���+���#���2�������#�2"���5��������#
�#���
Manufacturing and Distribution Planning
9–30 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
9–31OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Printing Supplier Schedules
1���#����"�� ���"#��2�"��"��2 ���"�������#"��������78 :��9�������2"�#���� "��)� ���+
>����������2"�#����� "��)� ����#���"�#������#��+�#������ "������� �������#������#���"�+���#"���#��#������������#�������#����#���+��� �����"#��#�����"����+���� �0�������"�� �"���� ��#��#������ ��#�#����#��#������#����"����#�����#����"����#������ ���� ���. �@���#"#"�������� ������������#��#�#����#��������#��+���#���6 ��*�#����)� ����
>������������"��#���������� �#����#���+����� � �����"����-��#����� � �����"�����#�����#����#���� ���"#���"�� #����� ��.���"���� #"� �����������"���#����#�*��� ������������#����=���#����.�#�����������������#��#��������#���������������������� � �����"����#�������"����"��"+"���#���+���������"�����"������ "�"#����� ��.��#��
���.���+�������#��#�������" �. �������������
�����#������#��������#���.�#�����"���#�������� � �����"����-�#�"���"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������#��#�#����#������#���=���#��#����.�#�����"���
Before You Begin
� )���#���)� �������� "�������� ��.�#����������������������'�������'��������+
See Also
� �������������������������������
Processing Options for Supplier Schedule Print
Process
1. Enter the document type to use when retrieving an item’s blanket order. If left blank, ’OB’ will be used.
Blanket Order Type ____________
Manufacturing and Distribution Planning
9–32 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2. Enter the status to use for updates to the supplier schedule. If left blank, no change will be made to the schedule’s current status.
Supplier Schedule Status ____________
Versions
1. Enter the version of Supply/Demand Inculsion rules to use for active blanket order selection.
Supply/Demand Inculsion Rules ____________ Version
Associated Text
1. Enter a ’1’ to print associated blanket order text. If left blank, no associated text will be printed.
Print Associated Blanket Order ____________ Text
Appendices
Manufacturing and Distribution Planning
9–34 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
OneWorld Xe (09/00) A–1
Appendix A: Action Messages
������#"���������+���)2052�05)2������+"����"�������+"���������#�. � :05������������#�������������C������������#��������#��������#������"��#�"�#�. ���
������,���������$*�3,��3,*�
�� $��������� �������
*���� �
������������������� � ��"���,��������
���������
"�� -����� ��������-�����
( ���"�������
����""����#� "#
�"� �����*�����>������������#���." ��+��#�"� �#�����#������# "#�
D0(
( ���"�������
6�5������#��="#�+�"#��
��������������"��� "��
D0(
( ���"�������
����� ���# "#
��������������"��� "���>�����#�� ������ �#��#���������
D0(
( ���"�������
��+����# "#
��������������"��� "���>�����#�� ������ �#��#���������
D0(
( ���"�������
<���#"���"G��
� �����������"� ����*�����
D0(
6 ����,�=���"#�
6 ��* � ���������������#����+"���������������#������*����
� ���������������#����+"���������������#������������
� ����� 6 ��* � ��������������#����� �#��#�����*������#� "#�"+�#�����������##���"��"�����������#�#��#�%%�
� ���� ���������������������� "��"#�����������#�#��#�%%%�
� ��+� 6 ��* � ���������������������*�����"#���@�"�����#��
� ����������������������������� "���"#����@�"�����#��
� �=���"#� 6 ��* � ���������������������*�����#�#��#��
� ����������������������������� "���"#���#�#���#��
1 1�G������ 1�G������ D����#"����@�"����������������"����#" �� �#������ �����
D����#"����@�"����������������"����#" �� �#������ �����
Manufacturing and Distribution Planning
OneWorld Xe (09/00)A–2
������,���������$*�3,��3,*�
�� ������������������� � ��"���,��������
���������
�������
*���� �
$��������� ��
��������-�����"�� -�����
�������
*���� �
$���������
8 -��������@���#"#�
6 ��* �"� �����*�����"#������#���@���#"#��� "�*��T�#�������#�#���������������#����� �� �#������������#������.���+��@�"����������#�
�"� ��������������"#������#���@���#"#��� "�*��T�#�������#�#���������
F �������#��@���#"#�
6 ��* �"� ���#����#������ ���>�����#����� ���������#���#��@���#"#��+��#������#�����#��
D0(
- -�������#�@���#"#�
6 ��* �"� ���#����#������ ���>�����#����� ���������#���#��@���#"#��+��#������#�����#��
D0(
< ���������@���#"#�
6 ��* �"� �����*�����"#������#���@���#"#��� "�*��T�#�������#�#���������������#����� �� �#������������#������.���+��@�"����������#�
�"� ��������������"#������#���@���#"#��� "�*��T�#�������#�#���������
5 5���� ��"���
;����#���#�=#
D����#"����@�"����������������"����#" �� �#������ �����
D����#"����@�"����������������"����#" �� �#������ �����
D ���#���#� 6 ��* � ���������������#��#����#������ ����"� ����#������ ����""���
D0(
� ��� 6 ��* � ���������������#����+"���������������#����*����
� ���������������#����+"���������������#������������
2 1"����� 1"����� D����#"����@�"����������������"����#" �� �#������ �����
D����#"����@�"����������������"����#" �� �#������ �����
Appendix A: Action Messages
OneWorld Xe (09/00) A–3
������,���������$*�3,��3,*�
�� ������������������� � ��"���,��������
���������
�������
*���� �
$��������� ��
��������-�����"�� -�����
�������
*���� �
$���������
� 12���/�#���#����#"��
� -�����
2�#�<"#
� ������
2�#�<"#
� �=���"#�
2�#�<"#
� ��+�
2�#�<"#
D����#"����@�"����������������"����#" �� �#������ �����(�#"���"�#�*������#������#�"#��H�������
D����#"����@�"����������������"����#" �� �#������ �����(�#"���"�#�*������#������#�"#��H�������
� 2�#�������
6 ��* D����#"����@�"����������������"����#" �� �#������ �����
D����#"����@�"����������������"����#" �� �#������ �����
Manufacturing and Distribution Planning
OneWorld Xe (09/00)A–4
OneWorld Xe (09/00) B–1
Appendix B: SynQuest Interface
����"�#�+����.�#���������� ��� �#"���"��5���+��#�"���2 ���"���������E��#�5���+��#�"���5������7559��� ������#��������"G��������#"�"G�#���� ���"��������=���#"���������+�#�������+ ���"��#�������+��#�"�����"�����#����"�"�#�+���� �#�����"�� �#�����#�"�#�������+"��������� �#��#��#"�"G������+��#�"���� ����"#�"��#����*��������#�"�#�
����"�#�+��������#���+� ��"���"�+���#"����"#��#������E��#�553
� ��*�������#���"�� ��"�����#� "#����#"��������"�#��#"��
� ��#��+��������������������"�#
� ��#��+��� �����������"�����+"��#"��
� -����#���.� ����
� -#���.����0� ��#���#�
� 6" ��+���#�"� �������#"�����#�
� 2 ������������#��+���5)2052�0�)2�� ���������������s
� )���������#"���+������E��#�55
� ����#�����#��+������E��#�55
����"�#�+����+��"#���.����0� ��#���#��� ������#�#�����+"�"#"����+�#��+� ��"�����������������#�"#�����#�3
� ���
� 5���"��
� <�.�
� �����#�-#��
�����#�����+"���#������������"����#���"#���"������� �������=��##����#�����E��#�55������"+"��#�� ������"�������� �.���-�����"#"����#��." ��+���#�"� �������#"�����#������#�����*�������#� "#�������#"�����#�����#��������@�"����#���#��+�����E��#�55�������#����##�����#���������@�"����#�#����." ��+���#�"� �����*�������#� "#�����������#�@�"����#�"������� ��������#���#�����=��#�#����#�����E��#�55�����"+"��#�� ������"�������� �.���@�"����#�+��������+��#����"#��������*�����
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–2
�����#���� ����+"�������#�"#�����"����#���"#���"������� ������=��#�#����#�����E��#�������#�"#������������#�"#�������.���##�����#��." ��+���#�"� �������#� "#�����#����#����=��#�#�����#��������#�"#���@�"����#�#�����E��#�
6�������#��������"�+���#"����#������E��#�55������������#�����@���#"#����/�#���#�#����*���������������������#���"������� ���������E��#�55�� ������#������� ���"#��#�������#"���#�#��"��#�����*������#"������#���.��#���������@���#"#"���������#���.��#���*�������� �#"������"�"�#�+����"�.�������#��������������-�#�����." "#��5��� #��#����������#��"�.�����������#.�����#����#"���#�����"����+#�"�C��#��� �#"������������E��#����"��������#����".������#���#���#������E��#�5���+��#�"���5������"�#�+����
Inbound Messages
��������������#��������#"���� ���"�����E��#��#����#�������#��#�������������#�. ��������#���#"�� ��������5)2����������"+���������� ��������#����+���#�����#�" �5�����)��"���������72 :$$9�������#�������#������������#���+� ��"���#�����+������3
$ ��+�
/ �=���"#�
! -����������@���#"#�
9 �����������@���#"#�
Inbound Synchronizer Events
�����#����#������#������E��#�55�#�����#���#��+��#�������+ ����#��"�#�+�������"�������#�.��*�+������E��#�55�#������#���+� ��"�������3
� -�.�����F�������E���#"#"��7) $$��U$-9
� -�.�������*��������� �#"���7) $$$:U$-9
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–3
����+� ��"���#�. �����".��#�������#�����������#��#������������� ��#�����#��#�������+ ������#� ��#���"������� ������� �+#��� �������".�#������E��#�����#M�#���"��#��� �������".��#�������� ��#����#"������#���������#��#�������#����
��������������������
���������������
(��������#��#���#�#���+�����*�������#"����"#�"�
���E��#�#��#�����#��#���#�#���+�#�����#"�������#"��
"������� ���������������#���-�.�����F������
E���#"#"��2�����������7) $$��U$-9��#����#��
����#��#���#�#���+�����*�������#"���
*���������������
+���������������������
��������
(����#��+�#�����������@���#"#"������#��+������#"��
����#"����"#�"�����E��#�����#��#����������
@���#"#"���+�����#"�������#"���"������� �����������
���#���-�.�����F�������E���#"#"��2����������
7) $$��U$-9��#����#������#���������@���#"#"�
���"�#�����#"�������#"���
*�������'�� �����
����������
(����#��+�#�����*��������� �#"����"#�"�����E��#
����#��#�����*��������� �#���@���#"#������*����
#�#����.�#��+������*������������������������#��
-�.��������� �#"���2�����������7) $$$:U$-9��#��
�#������#���*��������� �#"���
-������#"���#������E��#�5���+��#�"���5������"�#�+�������"#��+�#��+� ��"���#�*3
� ��##"��������#���=��#����#�
� ��##"������+ �#�+" ����C�+�����
� ��##"����������"�����#"��
� ��##"������;�������"��
� ��##"������8���"����#��-#�������"��
� ��##"�������@�"����#�+����������+"�"#"����=��#
� <�����"�����#.������.�#���;6�
� �=��#"���� ����������#��#������E��#�55
� )���"�����#.�����"#���.� ����
� )��"��"���#�������"��� ��
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–4
Setting Up Data Export Controls
>�����+"���#����=��#�"�+���#"���+��#���"�#�+�������##"��������#���=��#���#� ����"#��+3
� ��##"��������#���=��#����#� �+����*����������
� ��##"��������#���=��#����#� �+����*�������#� "#
� ��##"��������#���=��#����#� �+����*�������#"���"�#��#"��
� ��##"��������#���=��#����#� �+������������
� ��##"��������#���=��#����#� �+��." ��+���#�"�
� ��##"��������#���=��#����#� �+����#"��
� ��##"��������#���=��#����#� �+��"#���.�������#�
� ��##"��������#���=��#����#� �+����������������"�#
� ��##"��������#���=��#����#� �+��� �����
� ��##"��������#���=��#����#� �+���"�����+"��#"��
����������&��������������'�� ������������
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �
$� �����*��"#����#���=��#����#� ��� "�*�(���
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–5
�� �����#���=��#����#� �)��""����#����������"��#���+� ��"���+"� �3
� �����#"��
� ��������"��#���+� ��"���+"� �3
� ��������
:� �����) $�>D�$�"��#���+� ��"���+"� �3
� ;6��D���
4� ������R������$�"��#���+� ��"���+"� �3
� A�"��
&� �����$�"��#���+� ��"���+"� �3
� �=���#��1��(��
� �=���#��1��;��
� �=���#��1����
� �=#��6��=��5���
� <������-����"�#� �
!� �������"��#���+� ��"���+"� �3
� �=���#��1��-�@
� 1 �#�1" ���=��5���
� �=#�(2-��=��5���
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–6
����� /&��������
�����#"�� (������#��#�"���#"+"����#����#"���.��#����
�������� (������+"���������7��0��9�#��#�"���#"+"��#���#�����+
�������#����"������� ��"��"��#��#����"�"���+�#��
#����#"�������������������������������#�#���
�����+����������"���"�������"�#������#"������#�
��"������#����#���#"���++�#���#"����"���#�����#
�������7�������#"�������#�� +C.� ���"�����������
�"�"�� ����#��#����9
����+� ��"����������#�#���������+"����.������
������������� ����#�.���������3
2 (�����#�2���. ���������#
) (�����#�)���"��. ���������#
� 2��� ��������#
- -����#����������#
� 2����������2���"����������#
� 8���� �(�����#"��0��"�#�-�#��#�6" "��
�������#
� �� ������2���"����������#
�� ��.���#��#
�2 2���������
)� ���#��#�6" "��
;6��D��� ��������� �����"#��#���"��./��#C.�������"�����
#��#��"��#���+#�����./��#����#���.�" �"���. ��*�+�
� ���� "��#"��������#��#����� ������������#����./��#
"���� #"� ����� "��#"����������./��#�"�#��*���.��#��
�./��#�<".�"�����=��� ���+������ ���./��#�"�� ���3
� 6�#���(�� "��#"���7���������#9� -�#���#"���(�� "��#"��� 6�"���A"��� 6�"���1���#"��� 6�"���1���#"�����#���#��#��� ����#�)� �� 5��"���./��#���#���#��#��
A�"�� (���C��+"�����#��+����"+"��#"���#��#����#� ����
��� "��#"����������#�����>��������"���#������
�����������#��+���C��+"��������"�����#"����� ��
������#��� ��#"��������@����"�����#"����-�#���#"��
��"���������"�#����"#����� "��#"���7��� �����
������ ��#"��9��6�#�����"���������"�#����"#��.�#��
/�.������#����������.�#���������������#������
����"���
�=���#��1��(�� (������#��#���#��"������#���#����#������#���.�#��
��� "��#"���#����������������#����#"��������
A� "���� �����3
$ ;��.�#������ "��#"���#���������������
#����#"�������
� �����#����.�#������ "��#"���#���������
������#����#"�������
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–7
����� /&��������
�=���#��1��;�� (������#��#���#��"������#���#����#������#���.�#��
��� "��#"���#��������������#���#����#"��������
A� "���������3
$ ;��.�#������ "��#"���#��������������#��
#����#"�������
� �����#����.�#������ "��#"���#���������
����#���#����#"�������
�=���#��1���� (������#��#���#��"������#���#����#������#���.�#��
��� "��#"���#����������� �#���#����#"��������
A� "���������3
$ ;��.�#������ "��#"���#����������� �#��
#����#"�������
� �����#����.�#������ "��#"���#��������
�� �#���#����#"�������
�=#��6��=��5��� (������#��#���#��"������#���#���#����#"�������
��� ��.���=��#���#������=#��� ���#�.�����A� "������
��3
$ �=��#�#����#"��������#������=#���
��#�.���
� �����#��=��#�#����#"��������#������=#���
��#�.���
<������-����"�#� � ��"�+"� �����#� �#���"����"�#���=���#"����+���.�#���/�.�
-+�#���+"� ��"��#�#����$��#���/�.��" ��=���#��"����"�#� ��
�=���#��1��-�@ (������#��#���#��"������#���#����#������#���.�#��
��� "��#"���#����������"�@�"���+���#����#"��������
A� "���������3
$ ;��.�#������ "��#"���#����������"�@�"���+��
#����#"�������
� �����#����.�#������ "��#"���#���������
"�@�"���+���#����#"�������
1 �#�1" ���=��5��� (������#��#���#��"������#���#����#����=��#�#��
#����#"��������#����+ �#�+" ��
A� "���������3
$ �=��#�#����#"��������#����+ �#�+" �
� �����#��=��#�#����#"��������#����+ �#�+" �
�=#�(2-��=��5��� (������#��#���#��"������#���#����#����=��#�#��
#����#"��������#������=#��� �(2-�
A� "���������3
$ �=��#�#����#"��������#������=#��� �(2-
� �����#��=��#�#����#"��������#������=#���
(2-
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–8
����������&��������������'�� ��������������
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �
$� �����#���=��#����#� �)��""����#�������2<�"��#���+� ��"���+"� �3
� �����#"��
�� ��������"��#���+� ��"���+"� �3
� ��������
� �����) $�>D�$�"��#���+� ��"���+"� �3
� ;6��D���
:� �����R������$�"��#���+� ��"���+"� �3
� A�"���F"#��
4� �����$�"��#���+� ��"���+"� �3
� �=���#��1��(��
� �=���#��1��;��
� �=���#��1����
� �=#��6��=��5���
� <������-����"�#� �
&� �������"��#���+� ��"���+"� �3
� �=���#��1��-�@
� 1 �#�1" ���=��5���
� �=#��6��=��5���
����������&��������������'�� ������������������������
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �
$� �����#���=��#����#� �)��""����#�������)�8�"��#���+� ��"���+"� �3
� �����#"��
�� ��������"��#���+� ��"���+"� �3
� ��������
� �����) $�>D�$�"��#���+� ��"���+"� �3
� ;6��D���
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–9
:� �����R������$�"��#���+� ��"���+"� �3
� A�"��
4� �����$�"��#���+� ��"���+"� �3
� �=���#��1��(��
� �=���#��1����
� �=���#��1��;��
� �=#��6��=��5���
� <������-����"�#� �
&� �������"��#���+� ��"���+"� �3
� �=���#��1��-�@
� 1 �#�1" ���=��5���
� �=#�(2-��=��5���
����������&���������������������������
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �
$� �����#���=��#����#� �)��""����#�������2��;��"��#���+� ��"���+"� �3
� �����#"��
�� ������2�"��#���+� ��"���+"� �3
� ��������
� �����) $�>D� �"��#���+� ��"���+"� �3
� ;6��D���
:� �����R������$�"��#���+� ��"���+"� �3
� A�"��
4� �����$�"��#���+� ��"���+"� �3
� �=���#��1��(��
� �=���#��1��;��
� �=���#��1����
� �=#��6��=��5���
� <������-����"�#� �
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–10
&� �������"��#���+� ��"���+"� �3
� �=���#��1��-�@
� 1 �#�1" ���=��5���
� �=#�(2-��=��5���
����������&�����������������������������
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �
$� �����#���=��#����#� �)��""����#�������6�5�"��#���+� ��"���+"� �3
� �����#"��
�� <�����#���+� ��"���+"� ��. ��*3
� ��������
� �����) ��>D�$�"��#���+� ��"���+"� �3
� ;6��D���
:� �����R������$�"��#���+� ��"���+"� �3
� A�"���F"#��
4� �����$�"��#���+� ��"���+"� �3
� �=���#��1��(��
� �=���#��1��;��
� �=���#��1����
� �=#��6��=��5���
� <������-����"�#� �
&� �������"��#���+� ��"���+"� �3
� �=���#��1��-�@
� 1 �#�1" ���=��5���
� �=#�(2-��=��5���
����������&����������������������
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �
$� �����#���=��#����#� �)��""����#�������)�;�"��#���+� ��"���+"� �3
� �����#"��
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–11
�� <�����#���+� ��"���+"� ��. ��*3
� ��������
� �����) ��>D�$�"��#���+� ��"���+"� �3
� ;6��D���
:� �����R������$�"��#���+� ��"���+"� �3
� A�"��
4� �����$�"��#���+� ��"���+"� �3
� �=���#��1��(��
� �=���#��1��;��
� �=���#��1����
� �=#��6��=��5���
� <������-����"�#� �
&� �������"��#���+� ��"���+"� �3
� �=���#��1��-�@
� 1 �#�1" ���=��5���
� �=#�(2-��=��5���
����������&����������������������������
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �
$� �����#���=��#����#� �)��""����#�������-��5�"��#���+� ��"���+"� �3
� �����#"��
�� <�����#���+� ��"���+"� ��. ��*3
� ��������
� �����):$�>D�$�"��#���+� ��"���+"� �3
� ;6��D���
:� �����R������$�"��#���+� ��"���+"� �3
� A�"��
4� �����$�"��#���+� ��"���+"� �3
� �=���#��1��(��
� �=���#��1��;��
� �=���#��1����
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–12
� �=#��6��=��5���
� <������-����"�#� �
&� �������"��#���+� ��"���+"� �3
� �=���#��1��-�@
� 1 �#�1" ���=��5���
� �=#�(2-��=��5���
����������&���������������������������������
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �
$� �����#���=��#����#� �)��""����#�������)�"��#���+� ��"���+"� �3
� �����#"��
�� ������2�"��#���+� ��"���+"� �3
� ��������
� �����): �>D�$�"��#���+� ��"���+"� �3
� ;6��D���
:� �����R������$�"��#���+� ��"���+"� �3
� A�"��
4� �����$�"��#���+� ��"���+"� �3
� �=���#��1��(��
� �=#��6��=��5���
� <������-����"�#� �
&� �������"��#���+� ��"���+"� �3
� �=���#��1��;��
� �=���#��1����
� �=���#��1��-�@
� 1 �#�1" ���=��5���
� �=#�(2-��=��5���
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–13
����������&�������������������������
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �
$� �����#���=��#����#� �)��""����#����������;��"��#���+� ��"���+"� �3
� �����#"��
�� ��������"��#���+� ��"���+"� �3
� ��������
� �����):��>D�$�"��#���+� ��"���+"� �3
� ;6��D���
:� �����R������$�"��#���+� ��"���+"� �3
� A�"��
4� �����$�"��#���+� ��"���+"� �3
� �=���#��1��(��
� �=���#��1��;��
� �=���#��1����
� �=#��6��=��5���
� <������-����"�#� �
&� �������"��#���+� ��"���+"� �3
� �=���#��1��-�@
� 1 �#�1" ���=��5���
� �=#�(2-��=��5���
����������&������������������������������
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �
$� �����#���=��#����#� �)��""����#����������"��#���+� ��"���+"� �3
� �����#"��
�� ��������"��#���+� ��"���+"� �3
� ��������
� �����):��>D���"��#���+� ��"���+"� �3
� ;6��D���
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–14
:� �����R������$�"��#���+� ��"���+"� �3
� A�"��
4� �����$�"��#���+� ��"���+"� �3
� �=���#��1��(��
� �=���#��1��;��
� �=���#��1����
� �=#��6��=��5���
� <������-����"�#� �
&� �������"��#���+� ��"���+"� �3
� �=���#��1��-�@
� 1 �#�1" ���=��5���
� �=#�(2-��=��5���
Setting Up Flat File Cross-References
>�����+"�����C�+������"�+���#"���+��#���"�#�+����+��"�.����������#.�����������
��##"������+ �#�+" ����C�+���������"#��+3
� ��##"��������C�+������+����*����������
� ��##"��������C�+������+����*�������#� "#
� ��##"��������C�+������+����*�������#"���"�#��#"��
� ��##"��������C�+������+������������
� ��##"��������C�+������+��." ��+���#�"�
� ��##"��������C�+������+����#"��
� ��##"��������C�+������+��"#���.�������#�
� ��##"��������C�+������+����������������"�#
� ��##"��������C�+������+��� �����
� ��##"��������C�+������+���"�����+"��#"��
������������������������'�� ������������
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������
$� �����*��"#��1 �#�1" ����C)�+�������� "�*�(���
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–15
�� ���1 �#�1" ����C)�+�������#����������"��#���+� ��"���+"� �3
� �����#"��
� �������"��#���+� ��"���+"� �3
� �"��#"���-��"��#�
:� �����$�"��#���+� ��"���+"� �3
� )���������
4� �����1:��$U$�"��#���+� ��"���+"� �3
� 1" ��D���
����� /&��������
�����#"�� (������#��#�"���#"+"����#����#"���.��#����
�"��#"���-��"��#� (������#��#�"��"��#��#����"��#"����+�#���#����#"���
)��������� ����"���#"+"������#����*���-�#����#"���������
������������#�" �"�+���#"�������"�"������-�+���#"��
�� ��
1" ��D��� �������.���+������"+"��#�. ���1���=��� ���#���8����
<�����5�#��#�. �������"�1�%�$������#����#�����
5���� ����#����������H������+�����"��
������#"���
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–16
������������������������'�� ��������������
>����#����#��� "����+�"�+���#"��������+��#�����������������+��#�����#�" �
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������
$� ���1 �#�1" ����C)�+�������#�������2<�"��#���+� ��"���+"� �3
� �����#"��
�� �������"��#���+� ��"���+"� �3
� �"��#"���-��"��#�
� ���#���+"#��"�� "����#����$�"��#���+� ��"���+"� �3
� )���������
:� �����1:��$U$�"��#���+� ��"���+"� �3
� 1" ��D���
4� ���#����������"�� "����#������"��#���+� ��"���+"� �3
� )���������
&� �����1 $$$U$�"��#���+� ��"���+"� �3
� 1" ��D���
������������������������'�� ������������������������
>����#����#��� "����+�"�+���#"��������+��#�����������������+��#�����#�" �
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������
$� ���1 �#�1" ����C)�+�������#�������)�8�"��#���+� ��"���+"� �3
� �����#"��
�� �������"��#���+� ��"���+"� �3
� �"��#"���-��"��#�
� ���#���+"#��"�� "����#����$�"��#���+� ��"���+"� �3
� )���������
:� �����1:��$U$�"��#���+� ��"���+"� �3
� 1" ��D���
4� ���#����������"�� "����#������"��#���+� ��"���+"� �3
� )���������
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–17
&� �����1 $$�U$�"��#���+� ��"���+"� �3
� 1" ��D���
�������������������������������������
>����#����#��� "����+�"�+���#"��������+��#�����������������+��#�����#�" �
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������
$� ���1 �#���C)�+�������#�������2��;��"��#���+� ��"���+"� �3
� �����#"��
�� �������"��#���+� ��"���+"� �3
� �"��#"���-��"��#�
� ���#���+"#��"�� "����#����$�"��#���+� ��"���+"� �3
� )���������
:� �����1: �$U$�"��#���+� ��"���+"� �3
� 1" ��D���
4� ���#����������"�� "����#������"��#���+� ��"���+"� �3
� )���������
&� �����1: $$U$�"��#���+� ��"���+"� �3
� 1" ��D���
���������������������������������������
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������
$� ���1 �#�1" ����C)�+�������#�������6�5�"��#���+� ��"���+"� �3
� �����#"��
�� �������"��#���+� ��"���+"� �3
� �"��#"���-��"��#�
� �����$�"��#���+� ��"���+"� �3
� )���������
:� �����1 ���U$�"��#���+� ��"���+"� �3
� 1" ��D���
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–18
��������������������������������
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������
$� ���1 �#�1" ����C)�+�������#�������)�;�"��#���+� ��"���+"� �3
� �����#"��
�� �������"��#���+� ��"���+"� �3
� �"��#"���-��"��#�
� �����$�"��#���+� ��"���+"� �3
� )���������
:� �����1 �� U$�"��#���+� ��"���+"� �3
� 1" ��D���
��������������������������������������
>����#����#��� "����+�"�+���#"��������+��#�����������������+��#�����#�" �
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������
$� ���1 �#�1" ����C)�+�������#�������-��5�"��#���+� ��"���+"� �3
� �����#"��
�� �������"��#���+� ��"���+"� �3
� �"��#"���-��"��#�
� ���#���+"#��"�� "����#����$�"��#���+� ��"���+"� �3
� )���������
:� �����1:$�$U$�"��#���+� ��"���+"� �3
� 1" ��D���
4� ���#����������"�� "����#������"��#���+� ��"���+"� �3
� )���������
&� �����1:$�$U$(�"��#���+� ��"���+"� �3
� 1" ��D���
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–19
�������������������������������������������
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������
$� ���1 �#�1" ����C)�+�������#�������)�"��#���+� ��"���+"� �3
� �����#"��
�� �������"��#���+� ��"���+"� �3
� �"��#"���-��"��#�
� �����$�"��#���+� ��"���+"� �3
� )���������
:� �����1: $�$U$�"��#���+� ��"���+"� �3
� 1" ��D���
�����������������������������������
>����#����#��� "����+�"�+���#"��������+��#�����������������+��#�����#�" �
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������
$� ���1 �#�1" ����C)�+�������#����������;��"��#���+� ��"���+"� �3
� �����#"��
�� �������"��#���+� ��"���+"� �3
� �"��#"��
� ���#���+"#��"�� "����#����$�"��#���+� ��"���+"� �3
� )���������
:� �����1:��$U$�"��#���+� ��"���+"� �3
� 1" ��D���
4� ���#����������"�� "����#������"��#���+� ��"���+"� �3
� )���������
&� �����1:�$$U$�"��#���+� ��"���+"� �3
� 1" ��D���
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–20
����������������������������������������
>����#����#��� "����+�"�+���#"��������+��#�����������������+��#�����#�" �
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������
$� ���1 �#�1" ����C)�+���������#��������"��#���+� ��"���+"� �3
� �����#"��
�� �������"��#���+� ��"���+"� �3
� �"��#"��
� ���#���+"#��"�� "����#����$�"��#���+� ��"���+"� �3
� )���������
:� �����1:��$U$�"��#���+� ��"���+"� �3
� 1" ��D���
4� ���#����������"�� "����#������"��#���+� ��"���+"� �3
� )���������
&� �����1:�$$U$�"��#���+� ��"���+"� �3
� 1" ��D���
Setting Up Processing Options
>����#��������"�����#"���#��"��"��#��#���#�����+�#����#"���#��#�#���#����=��#�#�����E��#�55�
��##"����������"�����#"������"#��+3
� ��##"����������"�����#"���+����*����
� ��##"����������"�����#"���+����*�������#� "#
� ��##"����������"�����#"���+����*�������#"���"�#��#"��
� ��##"����������"�����#"���+������������
� ��##"����������"�����#"���+��." ��+���#�"�
� ��##"����������"�����#"���+����#"��
� ��##"����������"�����#"���+��"#���.�������#�
� ��##"����������"�����#"���+����������������"�#
� ��##"����������"�����#"���+��� �����
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–21
� ��##"����������"�����#"���+���"�����+"��#"��
� ��##"����������"�����#"���+����*���������"��
�����������������������'�� ������
1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���
$� �����*��"#��-�#���#"���A�"����#����2:��$ �"��#���+� ��"���+"� ������ "�*�1"��3
� -�#���#"���(�� "��#"��
�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������
� � "�*�#���-�#����#�.�����#����������"��#���+� ��"���+"� �3
� �����#"�������
�����������������������'�� ��������������
1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���
$� �����*��"#��-�#���#"���A�"����#����2 $$$�"��#���+� ��"���+"� ������ "�*�1"��3
� -�#���#"���(�� "��#"��
�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������
� � "�*�#����=��#�#�.�����#�������2<�"��#���+� ��"���+"� �3
� �����#"�������
�����������������������'�� ������������������������
1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���
$� �����*��"#��-�#���#"���A�"����#����2 $$��"��#���+� ��"���+"� ������ "�*�1"��3
� -�#���#"���(�� "��#"��
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–22
�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������
� � "�*�#����=��#�#�.�����#�������)�8�"��#���+� ��"���+"� �3
� �����#"�������
������������������������������������
1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���
$� �����*��"#��-�#���#"���A�"����#����2: $��"��#���+� ��"���+"� ������ "�*�1"��3
� -�#���#"���(�� "��#"��
�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������
� � "�*�#���-�#����#�.�
:� �����$�"��#���+� ��"���+"� �3
� 6�+���-����
4� ��������2��;��"��#���+� ��"���+"� �3
� �����#"�������
��������������������������������������
1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���
$� �����*��"#��-�#���#"���A�"����#����2 ����"��#���+� ��"���+"� ������ "�*�1"��3
� -�#���#"���(�� "��#"��
�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������
� � "�*�#���-�#����#�.�
:� ��������6�5�"��#���+� ��"���+"� �3
� �����#"�������
4� �����$�"��#���+� ��"���+"� �3
� 6�+���-�����2���"��
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–23
�������������������������������
1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���
$� �����*��"#��-�#���#"���A�"����#����2 �� �"��#���+� ��"���+"� ������ "�*�1"��3
� -�#���#"���(�� "��#"��
�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������
� � "�*�#���-�#����#�.�
:� ��������)�;�"��#���+� ��"���+"� �3
� �����#"�������
4� �����$�"��#���+� ��"���+"� �3
� 6�+���-�����2���"��
�������������������������������������
1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���
$� �����*��"#��-�#���#"���A�"����#����2:$��&�"��#���+� ��"���+"� ������ "�*�1"��3
� -�#���#"���(�� "��#"��
�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������
� � "�*�#���-�#����#�.�
:� ��������-��5�"��#���+� ��"���+"� �3
� �����#"�������
4� �����$�"��#���+� ��"���+"� �3
� 6�+���-�����2���"��
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–24
������������������������������������������
1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���
$� �����*��"#��-�#���#"���A�"����#����2: $��"��#���+� ��"���+"� ������ "�*�1"��3
� -�#���#"���(�� "��#"��
�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������
� � "�*�#���-�#����#�.�����#�������)�"��#���+� ��"���+"� �3
� �����#"�������
����������������������������������
1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���
$� �����*��"#��-�#���#"���A�"����#����2:�$��"��#���+� ��"���+"� ������ "�*�1"��3
� -�#���#"���(�� "��#"��
�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������
� � "�*�#���-�#����#�.�
:� �����������;��"��#���+� ��"���+"� �3
� �����#"�������
4� �����$�"��#���+� ��"���+"� �3
� 6�+��0-�����2���"��
���������������������������������������
1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���
$� �����*��"#��-�#���#"���A�"����#����2:��4�"��#���+� ��"���+"� ������ "�*�1"��3
� -�#���#"���(�� "��#"��
�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–25
� � "�*�#���-�#����#�.�
:� �����������"��#���+� ��"���+"� �3
� �����#"�������
4� �����$�"��#���+� ��"���+"� �3
� )���#�����#.�������.�#���;6�
�����������������������'�� ��������������
1���#�����" ������2����#"���C��"��#�������78 $$$9�����������2���"���
$� �����*��"#��6�#���A�"����������#��������"�#����"����+����2���"���7) $:$�9�#�����+����*���������"��������#���������2���"�����#"���+���#���)��������
�� � "�*�#���-�#����#�.�
� ��������2<�"��#���+� ��"���+"� �3
� 2�#�<"#������#"�������
:� �����$�"��#���+� ��"���+"� �3
� 2�#�<"#�6�+���-����
Setting Up UDC Mappings
>��������="#"�������������������+"���������#�����E��#�������(����"����������+"����.��������������������������#�������"+��#��������"���#������.�"��������
1���=��� �3
IA$A/�'����
����������
���D����
����������
$�
$4
��
1"���
�
:�
4�
)� ����
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–26
��##"������;�������"���"�� ����#���+� ��"���#�*3
� ��#����;���5���"��
� ���������"���+��#������E��#�"�#�+���
�����7$�������
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������;���+"���������5���
$� �����*��"#�������5���"����� "�*�(���
�� ��������5���"���)��""�������� �#��#���+� ��"���+"� ������� "�*��T3
� 2����#�����
� )���������
� �"�-��
� �=#��� �A����D���
� ;����+�����
� �=#��� �����
� � #�>0D
�������3�������+�� #�+��#����� �#��>0D�+"� ��"�D����"�������������#��� �#���������#��������"#"�� �#������"���
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–27
����� /&��������
2����#����� (������+"���������7%�0�>9�#��#�"���#"+"��������������
�#���
)��������� (������#��#�"���#"+"��#���#�. ��#��#����#�"�������+"���
����������#�. ��"�� ���+����#������;���#����
�"�-�� (������#��#�"��"��#��#����"��#"����+�#���#����#"���
�=#��� �A����D��� ���������������#��#�#��������5���"���"�+��
;����+����� (� "#��+��� "�������+�������"+"�������+"��������� "#�
�=#��� ����� ��"��� �������#�"���� "#��+��� "���=#��� ����+"���
�����+�������"+"�������5���
� #�>0D ��"��������"���#�����#�������#��������� ��.�
�� �#���+���#���+" ���������+�� #��� ���"�D�
Processing Options for Code Mapping Revision
Process
1. Enter the default view mode. ____________ ’ ’ – View All Mappings (default). ’1’ – View Inbound Mappings only. ’2’ – View Outbound Mappings only. 2. Enter the Mapping revision ____________ mode. ’ ’ – Enter Mappings for UDC Values. ’1’ – Enter Mappings for Data Item Values.
��������������������D�������������
-#�"������������#��#�������"+��#������������"���#����#������#������#��#�� �#����#"����+�������� "���� ����"#�"������� ���������E��#������#������+� ��"������������"��3
$� ���������"���+��2����#�������������)������������
5�������� ��� �������������#�#����7����9�#�����E��#��"��@��#�����#�����>�������������#�������� ��� �������������##������ ���#��#��������#��=��#���#�����E��#�
�� ���������"���+��2����#�������������)����������2)
5�������� ����*������������"�"#��72)��9�#�����E��#���*�����"�"#��
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–28
� ���������"���+��2����#�������������)������������
5�������� ����*�����������#�#��7�)��9�#�����E��#���*����� ����#�#��
:� ���������"���+��2����#������ $�����)������������
5�������� ����*�������#"�������#"���#�#��7�2��9�#�����E��#��*�����#���#�#��
4� ���������"���+��2����#������:������)����������(�
5�������� ��� ��������*�����#�#��#�����E��#�� ��������*����� ����#�#��
5�������� ��� �����������������#�#��#�����E��#�� �������#"������ ��� ����#�#��
5�������� �������������#�#��7DR�)9�#�����E��#���#"������ �� ����#�#��
5�������� ��� ������#�#��7<��)9�#�����E��#��"���@��#�� ���#�#���>�������������#�������� ��� ������� ����#�#���#��#�������#��=��#���#�����E��#�
&� ���������"���+��2����#������:$�����)����������-
5�������� ��"#���.����0� ��#�#��*"���#����7��T�9�#�����E��#�"#����������#���#�����>�������������#�������� ��"#���.����0� ��##��*"���#������ ���#��#��������#��=��#���#�����E��#�
!� ���������"���+��2����#������F:������)����������1�
5�������� ��." ��+���#�"� ���������#�+"=�������"�. ��@���#"#�71�)E9�#�����E��#�." ��+���#�"� ���������#�+"=�������"�. ��+ ���
Setting Up Generic Data Item Mappings
>����������E��#������#��#������#����" �����" �. ��+�������� ���"������"����#��"#�������"����-�����"#"������+�� #��� ���+����#��"#���"����E��#����� ����+"��������
����#��������"����#��"#�������"������� �#��#���+� ��"���#�*3
� ��#��������"����#��"#�������"��
� A�"+������"����#��"#�������"��
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–29
��������������������������
1��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������8���"���#��-#���5���
$� �����*��"#�������5���"����� "�*�(���
�� ��������5���"���)��""�������� �#��#���+� ��"���+"� ������� "�*��T3
� ��#��-#���5���"��
� �"�-��
� �=#��� �A����D���
� ;����+�����
� �=#��� �����
� � #�>0D
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–30
Processing Options for Generic Data Item Mappings
Process
1. Enter the default view mode. ____________ ’ ’ – View All Mappings (default). ’1’ – View Inbound Mappings only. ’2’ – View Outbound Mappings only. 2. Enter the Mapping revision ____________ mode. ’ ’ – Enter Mappings for UDC Values. ’1’ – Enter Mappings for Data Item Values.
�%��������������������������
-#�"������������#��#�������"+��#�������"����#��"#�������"���#����#�����#�������#��#�� �#����#"����+�������� "���� ����"#�"������� ��������E��#�������#������#���+� ��"�������"��3
$� 8���"����#��"#�������"���+����#��"#���-��5S�>2��
5�������� ��"#���.����0� ��#�#��*"���#����7��T�9�#�����E��#�"#��#����
�� 8���"����#��"#�������"���+����#��"#���-�5S�)-�����������+"��������5(2�
5�������� ��"#���.����0� ��#���#����������+"� ��#�����E��#�"#���"#"�� �+ ������"����"� �������+"���#���+"� ��������"#�"��"#��.����0� ��#�#��#�#���#���"#����"#"�� �+ ����� ���
� 8���"����#��"#�������"���+����#��"#���-�5S(<�)�����������+"��������5(2�
5�������� ��"#���.����0� ��#���#����������+"� ��#�����E��#�"#��� �#��������"����"� �������+"���#���+"� ��������"#�"��"#��.����0� ��#�#��#�#���#���"#���� �#������� ���
:� 8���"����#��"#�������"���+����#��"#���-�5S��1����������+"��������6;>�)�
-+�#���"#���.����0� ��#�.�������.��76;>)9�"�G�����. ��*��#���#������#����� �����+"����"��#�"�����#����+�� #�#������E��#�"#��.���������
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–31
4� 8���"����#��"#�������"���+����#��"#���-�5S��1����������+"��������1(5-<>�
-+�#���"#���.����0� ��#�� ���"���+��" ��72)2:9�"�. ��*��#����#�����#����� �����+"����"��#�"�����#����+�� #�#������E��#�"#��������#�+��" ������
&� 8���"����#��"#�������"���+����#��"#���-�5S��1����������+"��������2<(DD�)�
-+�#���"#���.����0� ��#�� ��������.��7(D2<9�"�G�����. ��*��#���#������#����� �����+"����"��#�"�����#����+�� #�#������E��#�"#��� ����������
!� 8���"����#��"#�������"���+����#��"#���-�5)�<��(��
5�������� ��"#���.����0� ��#�#��*"���#����7��T�9�#�����E��#�"#��� ����#�#��
�� 8���"����#��"#�������"���+����#��"#���)S<-5)����������+"��������5(2�
5�������� ��"#���.����0� ��#���#����������+"� ��#�����E��#������ "�"#������#"���+ ������"����"� �������+"���#���+"� �������"#�"��"#���.����0� ��#�#��#�#���#��������� "�"#������#"����� ���
%� 8���"����#��"#�������"���+����#��"#���)S<������������+"��������5(2�
5�������� ��"#���.����0� ��#���#����������+"� ��#�����E��#������ ���#"���+ ������"����"� �������+"���#���+"� ��������"#�"��"#��.����0� ��#�#��#�#���#��������� ���#"���+ ���
$�� 8���"����#��"#�������"���+����#��"#���)S��F������������+"��������5(2�
5�������� ��"#���.����0� ��#���#����������+"� ��#�����E��#����������� ���+ ������"����"� �������+"���#���+"� ��������"#�"�"#���.����0� ��#�#��#�#���#�������������� ���+ ���
$$� 8���"����#��"#�������"���+����#��"#���)S�)(�����������+"��������5(2�
5�������� ��"#���.����0� ��#���#����������+"� ��#�����E��#������#��*���+ ������"����"� �������+"���#���+"� ��������"#�"��"#��.����0� ��#�#��#�#���#���������#��*���+ ���
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–32
$�� 8���"����#��"#�������"���+����#��"#���)��S��1����������+"����������2��
��"���+�� #��� ���"�����#������� �����������+�������� ��#������E��#�����������#���#��� ���
$ � 8���"����#��"#�������"���+����#��"#���)��S��1����������+"��������58��
��"���+�� #��� ���"�����#������� �����������+�������� ��#������E��#�����������+��#�"����� ������� ���
$:� 8���"����#��"#�������"���+����#��"#���)��S��1����������+"��������2<��
��"���+�� #��� ���"�����#������� �����������+�������� ��#������E��#�������� ���"����� ������� ���
$4� 8���"����#��"#�������"���+����#��"#����F-2S��1����������+"���������2�
��"���+�� #��� ���"�����#������� �����������+�������� ��#������E��#��"���@��#�#�������#"���
$&� 8���"����#��"#�������"���+����#��"#����F-2S��1����������+"��������2)��
��"���+�� #��� ���"�����#������� �����������+�������� ��#������E��#��"���@��#��"�"#�������
$!� 8���"����#��"#�������"���+����#��"#����F-2S��1����������+"��������)��
��"���+�� #��� ���"�����#������� �����������+�������� ��#������E��#��"���@��#�#������#"����� ���
$�� 8���"����#��"#�������"���+����#��"#����;2S��1����������+"����������)�
��"���+�� #��� ���"�����#������� �����������+�������� ��#������E��#�����#����#��
$%� 8���"����#��"#�������"���+����#��"#����;2S��1����������+"���������>2�
��"���+�� #��� ���"�����#������� �����������+�������� ��#������E��#�����#�"#���#����
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–33
Setting Up Requirements for Resource Definition Export
>�����+"���������#��#����"#��+�#�� ������"�������� �.��"������� ���"����#���"#���"��#���-#���5�#������-#���6����02 ��#���� "��#"�������"�#�+������ �������"G������#�+���#���"#���.����0� ��#��-������� ���#��"�#�+����"�� ����.�"��"�+���#"����.��#��������������������������"�#"���������+ ���#��#�"������ ����#��*������ ���#����-��#������E��#5���+��#�"���5�������#����������� ����"�#�"�������"#���++��#"�"#����#��
�����#��������+"���#���������"�����"����#����#�������������##���#��������������#�#����." ��+���#�"� �������*�������#� "#�������#��#���#��������"#���@�"����#�"��#���E���#"#��2��+"� ��+��#���." ��+���#�"� ����� ��"��#���E���#"#��)�@�"���+"� ��+��#�����#� "#�
>�����+"�������#�"#���"����"�" ��+��"������������>�����+"���"#���"������ ����"����#���"#���������#�"#����� �������.�"��"�+���#"��������������"�#"����(+#��������+"���#�������#�"#���"��#���"����#����#������������##����#����#��." ��+���#�"� �����#� "#�����������#��D�#��#��#��������#�"#���#��#�������+"���"��#���"����#����#��������#�"����"�#� ����" �. ��"�����E��#������������##����#�����������#�"#���#������*������#� "#�����#����#����=��#�#�����*�����#�����E��#��#������E��#�#�����#���#"�� �����#��#�������#�"#���"��"#���#��.���
�������+�������������������������������&���
1���#���8���� ���#��������78��9��������8���� �;����+"���������
$� �����*��"#��;����+"���������72���:(9��#����:$�"��#���+� ��"��+"� �3
� 2����#�����
�� �����-�"��#���+� ��"���+"� ������� "�*�1"��3
� ;����+"��������
� � "�*�(���
:� ���;����+"������������ �#��#���.�##����+�#����"���������� �#��#��+� ��"����� ��3
� ����
� ���"�#"����$
� ���"�#"�����
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–34
E���3������� ����+�#���+"#�#��������#��"�����"�#"�����"���������������"�#�+���������"G��#������ �����������
����+� ��"������#��������#��*"���#����#��#�#���"�#�+������+"���"��#�������+"���������#�. ��"������� ��
� �<�C�#�� ������
� (��C�����"��������
� <6�C� �.�������
� �-�C�����#�"#��
�����������+"���#����#��*"���#���������������������"#���"��#���"����#���#����������#��������"�#������#��*"���#����#��"���#"+��#���"#������������������#�"#����������#������������������#�"#�������# ��"�#������E��#�5���+��#�"���5������"�#�+�������������������������#��+� ��"��3
� ("��"���#���� ���"���������+�#�������������#��K���C� �����L�#���*���������� ��������#�� ���"#���"���52�05)20�)2
� ("��"������"���#����������+����"#���#����K���C"��L������#����*��������� ��������#�"������"#��
� ("��"������"#��H�#"���.�"������#����K��"#C.���L������#����*��������� ���� �� �#��#����@�"��������"#�����"#��
� ("��"������"#��H�#��*"���#����#����K#��*��L������#����*��������� ���##�����#���"#���������� ��"#��
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–35
Launching Outbound Subsystem UBEs
����6�#���A�"�������������#���+� ��"��3
� ���#������"��� ��������.���������#���=��#����#� �+������#����#"���#����
� <�������#���������#��#���+�����#��#��+��#��#������E��#�55�
>��������#����#���6�#���A�"��������� ��� �����"#���#�.���.�"##���#�#��������;� �������=��"������#���+�" �������������#�����#�"�������� �������
������������������������7./�
1���#�����#���(��"�"#�#"������ ������78F%�$$9��������6�#���A�"���
$� �����*��"#��6�#���A�"���C�(��" �. ��A�"������#��)��:&��"��#��+� ��"���+"� ������� "�*�1"��3
� 6�#���(�� "��#"��
�� )���A�"���R������$�
Exporting Planned Orders to the SynQuest MM
�������� ����������������#�����E��#����+���#����=��#������5)2�"���� �#���
��&�����������������������D����,,
1���#���5�#�"� �2 ���"���(�����������������"�� �����#"��������78 :::9�������52�05)2�2 �����������=#��#"���+���=��#�
$� �����*��"#��6�#���A�"���C�(��" �. ��A�"����� ��#���"��R������$���=��#�2 ����������#�����E��#�
�� ������2���"�����#"���+���#���)��������
� � "�*�#���2����#�.�
:� �����$�"������"�����#"���$�
4� �������"������"�����#"�����
&� ������>DE;����"������"�����#"��� �
!� �����2�"������"�����#"���:�
�� ��#"���4�?�2�7����#�#��#��#�"��������#��#������E��#�2 ������#�#�9
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–36
2�"���#�#��#��#�"��������#��#������E��#�2 ������#�#��
%� � "�*��T�
�������������#�����+�� #���"���R������$�
Processing Options for Planned Order Extraction
Process
1. Enter a ’1’ to automatically ____________ attach Parts List and Routing data to the Planned Order. 2. Enter a ’1’ to export Planned ____________ Purchase Orders only; ’2’ to export Planned Work Orders only; or ’3’ to export both types of Planned Orders. 3. Enter the Vendor Name (UDC ____________ 00/VN) that will import the Planned Orders. If left blank, the UBE will end immediately. 4. Enter the Purchase Order Status ____________ that the system will use when exporting Planned Purchase Orders. (Required) 5. Enter the Work Order Status ____________ that the system will use when exporting Planned Work Orders. (Required)
SynQuest
Only one of the following parameters must be specified. If the Data Source Name is given, the Environment Name will be ignored. If the Data Source Name is left blank, the Environment Name must be supplied.
1. Enter the OneWorld Data Source ____________ Name where the SynQuest Exchange Repository resides. 2. Enter the OneWorld Environment ____________ Name which is configured to connect to the SynQuest Exchange Repository. 3. Enter a ’1’ to export Planned ____________ Orders using the Add Work Order transaction or ’2’ to export Planned Orders using the Add End Item Demand transaction.
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–37
Running Outbound Item Balances
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������-#��6� ������=#��#"���
6�+���� ���"������������#�����E��#�55��"#��#�����#�����#���#���.��#���" �. ��@���#"#"��"������"����#����;��#�����+�� #�+��#�"��������#��6����02 ��#���#����7�#���#����#���5)2���#���9�#���� �� �#��"#������" �." "#��>����������#�"���������������������#����+���"�� �#"���"�����E��#�
-+��������#�#����������#�.�+�������#"������E��#�55�����A�"��R������$�7���+�����9����������A�"���R��������7+"�� �����9�#���������#���"����#���"�+���#"���#�����E��#�55�
Processing Options for Export Inventory Balances to SynQuest
Process 1
1. Enter a ’1’ to run this UBE in ____________ Final mode. If left blank, the UBE will run in Proof mode. 2. Enter a ’1’ to calculate ____________ nettable quantity based on Item Availability in Branch/Plant Constants. If left blank, nettable quantity is calculated using the following options. 3. Enter a ’1’ to reduce nettable ____________ quantity by the Safety Stock of the Item. 4. Enter a ’1’ to add Quantities ____________ in Transit to nettable quantity. 5. Enter a ’1’ to add Quantities ____________ in Inspection to nettable quantity. 6. Enter a ’1’ to add Quantities ____________ in User Defined Bucket 1 to nettable quantity. 7. Enter a ’1’ to add Quantities ____________ in User Defined Bucket 2 to nettable quantity. 8. Enter up to 5 Lot Hold Codes to ____________ include in nettable quantity calculations. Enter a “*” to add ALL held lots to nettable quantity. If left blank, no held lots will be added to nettable quantity.
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–38
Process 2
Only one of the following parameters must be specified. If the Data Source Name is given, the Environment Name will be ignored. If the Data Source Name is left blank, the Environment Name must be supplied.
1. Enter the OneWorld Data Source ____________ Name where the SynQuest Exchange Repository resides. 2. Enter the OneWorld Environment ____________ Name which is configured to connect to the SynQuest Exchange Repository.
Reviewing the Processing Log
1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9�������2���"���<����
1��#��*"����������������������*�#�������"��� ���#�������#��#�#��"�#�+��������������#��������"�#��#����#"���
���%��'���������������
Appendix B: SynQuest Interface
OneWorld Xe (09/00) B–39
$� �����*��"#��2���"���<�������� �#��#���+� ��"���+"� �3
� �����#"��
� ��������
�� ��#��D�"��#���+� ��"���+"� ������� "�*�1"��3
� 2�����
� A�"+��#��#�#���"�#�+������������ �#����#"���
�������3�(�K>L������#��#�#���"�#�+�����������+� ���"##�����#����#"���#�#������E��#��=�������)���"#�������E��#��"��#��/��#�#�"�#����#"�������#������#���"�#�+������#��#���#����#"���#��#����=����������"#����1��=��� ���"+�#���"�#�+�����=��#��������+�����.������ ��#�"�����#���#�#����������������#������ ����+"����"#�"�����E��#�55��#�������@��#�55��" �/��#�#�"������-��#�"��=��� �������� ������+� ����#����#����#"���#�#����=����������"#����.�#����E��#�55��/��#���"#�.������#���.������ ��#�"����#��="#�"�����E��#�
����� /&��������
2����� (��"��"��#��#����*������������+� ��������
#������#���.�#�������"����#����(+#�����������
.������*�������������"#�������� �����.������#��
#������#���.�#�������"���������
A� "���� ���+���� ���+#������3
� ;���������� �
$ 2������������������
1������� ���+#���3
�� �����#������������#��#������.���
����+� ���������
�++ �����#������������#��#��������#���#
.�����������
Manufacturing and Distribution Planning
OneWorld Xe (09/00)B–40
Index
Manufacturing and Distribution Planning
9–42 ����� ��R��7�%0��9To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
OneWorld Xe (9/00)
Index
A
(.��#���� "������� "����%'$
(����� �#������������" �. ��� ' :
(�#"�����������)2052�05)2��('$
(��"�����+��G�������#���������������
:':%
(��"�����+��G�������#������*������:'4$
(��"#"��� ��#���"�+���#"���+����!'�$
(��. �C#�C�������+"�"#"����$'�$
(�2
�� �� �#"����:'�
����#"����:'�%
(��" �. ��#�����"�������#"����:'�%
B
6�#���." �������#"���52���&'�
6�#���." ��+���#�"� ����"��"����&':
6�#�������"�������������+��#�"���
&'$
6" ��+���#�"� ��5)2��4'���4'!
6" ��+�5�#�"� �-�@�"�������"�����#"���
4' $
6" ��+���#�"� ���#�����#��������+ ���
:'�:
6" ��+�5�#�"� �)��""��������"��
��#"����&'&
6 ��*�#��������� "������� "����%'�
6 ��*�#������ �������� "������� "���
%'�
6 ��*�#��������������++��#"�����#�
������%'�
6�����)� �#"���"��)��""��������"��
��#"�����'$�
6������ �#"���"�����"��"�����'$�
C
�� �� �#"����#��������"#��+���"#"�� ���*
���#��� ':�
�� �� �#"��
���" �. ��#�����"���:'�
���� �#"������" �. ��#�����"���:'%
���"������" �. ���:'�
+����#�������#"����:'44
#"����"���:'!
����� "���"#��������������������:':&
�����"#��<���������"�����#"���� ' &
�����"#��5�����������������"��
��#"���� ' :
�����"#��2 ���"���5�����)��""���
����"�����#"���� ':�
�����"#���@�"����#��"� �����##"������
!':
�����"#���@�"����#�� ���"������"��"��
��*����#�� ����� '4&
�����"#��)�@�"����#�2 ���"���7�)29�
��+"�"#"����$'$!
�����"#���@�"����#�� ��
�����#"���� '4:
��"��"���+��5)2�� '44
�� "��#"���� '4%
�(�2���� �� �#"����:'%
� �������������#"��"���� ' %
� ��"����������:':%
��C�����.�C�����#����+"�"����!'$�
�����5���"���)��""��������"��
��#"����6'�!
�����5���"���)��""���+����6'�&
�����"�������"���+���#�" �+����#
����������+����#��'�����+"�"���#��
�"#".�#"����"������72:�%$9
���+"�����"#����&'�
#��+��������'$
���"���#"�����'$:
���� "��#��������������"����:':&
���#"���������"��������
����+��#�"����&'$:
Manufacturing and Distribution Planning
OneWorld Xe (9/00)
����"���� �������"#����'�����##"�����
��#�" �+����#
����"���������� �������"#����'��
��##"��������#�" �+����#M���##"�����
������+����#
���#"��� "�0"#���� �#"���"���!'�:
���#"����#����#���#"�� ���!'�!
���#"������#"#"�����#"����!'��
�"#"�� ���*����#����� �� �#"���52�� ����
':4
�)20)��2�2 ���"���)������#"���
����"�����#"���� '::
D
��#���=��#����#� �)��""���+����6'4
��#���=��#����#� ���##"�������6':
��#��� ��#"��
�����#"�������#������� ��+���
"#����:'$�
5)2��4'�
��+"�"�����C�����.�C�����#��!'$�
��+"�"��������� "����!'��
��+"�"�����������+" ������� ��� '�$
��+"�"����"����#���##����%'%
��+"�"������ "�����#��#�"�+���#"����%'4
��+"�"������ "�����#��#��%'4
��+"�"������ "��� "#������#�����%'$
��+"�"���#���#��*"���#����+��������
!'$&
�� �#������������"�����#�" ��
������+���� ':�
�� �#"�����#������� ���!'�!
�� �#"����������:' !
�������+����#"���� '�
���������##�����'$�
��#�" �+����#���'4
��#�" ���������"��
��#��������+ ����:'�:
�#"��"���� ������������ ' %
��#�" ������
�� �#"����:' !
+"=�������@���#"#���:':
��"��"����:' !
��"��"���+��5)2��4'$:
��*"����"#���:' &
��#��"�"������" �. �������"#��� '$$
��#��"�"��� ���C����� ����� '$%
�"��#������+��#�"����&'�
�"��#�������
��"��"����+���������@�"����#
� ���"���� ' $
��"��"���+�������"#���@�"����#
� ���"���� '4&
�"��#��� "#����"��"���5)2���*
����� ��� '4!
�"#".�#"����#����&'�
�)2
��#"����������('$
@���#"#��#�����:'��
�)2��52�������)��2���##"�������!'!
�)2052����#�" �5�����)��""���
����"�����#"����:' �
5)2����� � �����"����&'%
�)2052�05)2������"�����#"����:'$
��� "��#"�����#������� ���!'�!
E
�++��#"�����#������
. ��*�#�������������%'�
��� "������� ���%'�
���"������" �. ���� �� �#"����#"����"��
:'�
���"���C#�C�������+"�"#"����$'�$
��#��6" ��+�5�#�"� �-�+���#"���+���
:'&4
��#�0������������ ��+���72 : �$9��%'��
��#�"�����������"#������ ��� '$:
��#�"�����*����#��+��))2�� '4
����#��"�.�����������G"���6'�
�=��#�-����#���6� �����#�����E��#�
����"�����#"����6' !
�=��#"���2 ����������#�����E��#�
6' 4
F
1�#���#���������
��#�"� �� ���"����$'�%
���������������"#��� ���"����$'��
1��#���� �����������#������##"������
:'&:
1��#��
���������##�����'$�
Index
OneWorld Xe (9/00)
+����#�����������'$
+����#"�����'!
1"����*�����7'1��9��@���#"#��#���
+��5)2��4'$�
1"=�������@���#"#��71�E9����#�"
�������:':
1 �#�1" ����C)�+������+����6'$4
1 �#�+" ����C�+��������##"�������6'$:
1����#����������#�#"#"�� � �����'$
1����#����"���#"�����'$:
'�������(�����"=�6�'�1����#
�� �� �#"����=��� �
1����#�������#"������ #"+��" "#����' �
1����#�������#"����:'��
�.��#��:'4
��#�����#"���.��*�#��:'4:
� ���"�����"G���#"�����"����:'4:
1����#�������#"����� �� �#"����:'44
1����#�������#"�����"�����##"������
!'$�
1����#���""������#��������+ ����:'�:
1����#"��
�������� '�
+��#�����'!
1����#"��� ��� �������#������'�
1����#"�������"�����'4
1����#"����������'$:
1������#�0������������ ���%'��
1��
���"#"��� ��#���"�+���#"����!'�$
�����5���"���)��""����6'�&
��#���=��#����#� �)��""����6'4
��#��6" ��+�5�#�"� �-�+���#"����:'&4
1 �#�1" ����C)�+�������6'$4
-#���5�#��)��""����!'$!
<"��0"#���� �#"���"����""����!'�4
������#�" ��:'4�
������#�" �'�2����--��:'4�
)������2�+" ��)��""���� '��
A����������� ��5�#��)��""����%'!�
%'$�
��*����#��5�#��)��""���� '&
��*����#��)������;�"#�)��""���
'$4
��*��"#��6�#���A�"���'�(��" �. �
A�"����6' 4
��*��"#��6" ��+�5�#�"� ��:'&:��&'4
��*��"#��6�����)� �#"���"����'!
��*��"#��6�����)� �#"���"�
F"��������'$$
��*��"#����06�C2����#�2 ���"��
��. ���!'$�
��*��"#�������5���"����6'�&
��*��"#����#���=��#����#� ��6':
��*��"#����#�" �5������:': ��:'::�
4'$ ��&'$$��&'$!���'�%
��*��"#����#�" ��������&'�:
��*��"#��1 �#�1" ����C)�+������
6'$:
��*��"#��1����#�������#"��
)��""����!'$�
��*��"#��-�#���#"���A�"����6'�$
��*��"#��-#���6������!'�$
��*��"#��"#���.������!'$
��*��"#��-#���5�#��6�����!'$!
��*��"#��"#�����#��.�����!'$4
��*��"#��<���#"���6�5�-�@�"���4' $
��*��"#�� "��0"#���� �#"���"���!'�:
��*��"#��5���+��#�"�����*�����
:'4$
��*��"#������������ "����4'��
��*��"#��2���"���-�@�"���4'$!
��*��"#��2���"���<����6' %
��*��"#��)������2�+" ��)��""���
'�$
��*��"#��)������;�"#�� '$4
��*��"#��)��#"�������#"����!'��
��*��"#����� "��� "#������#����
%'$:
��*��"#������ ��������������4'$%
��*��"#������ �0�������-�� �"��
)� ���!'�
��*��"#���"�����"���&'$$��&'$&���'��
��*��"#��#"����"���&'�
��*��"#������������� ����#���%'&
��*��"#����*����#��� '4
1��G������
���"���#������*������:'4$
���"���#��������������:':%
1��G��+������:'4
1�G��������5)2��4'�
Manufacturing and Distribution Planning
OneWorld Xe (9/00)
G
8����#������ "�������� ��)���#�
����"�����#"����%'$�
8����#"��
�)2�� '4:
'�������8����#"���5)2M���##"�����
����������������"�� �"���� �
��#������� ��+��� �"#����:'$�
��#������� ��+��� ��#���"#����:'�&
8����#"�������#������� ��+��� �"#���
:'$�
��#��� ��#"����:'$�
��#���@�������:'$�
8����#"�����"�� �� ��� ���#������� �
��#��������+ ������#� ��:'�4
��#��������+ �������#���:'�4
8����#"�������� "������� ���5)2
�������%'$!
8����#"��������"#���@�"����#�� ���
'4:
8����#"�����#�"� ��@�"����#�� ���
4'!
8����#"���52��+��.�#���." ��&'�
8����#"���52��+��#��������"���#��
&'$4
8����#"����� #"C+��" "#��� �����'$
8����#"���� ���"���." �+����#��'��
��#�"������ ���"���."
8����#"����������@�"����#�� ���
'�4
8����#"�����������"#���#���#"�� ��
'$$
8����#"����������#������"#��� ���� ':�
8����#"���"�� �� ��� ���#������� ��
:'$$
8����#"������ "������� ���%'$!
8����#"���#�����������+" �
��#���#"�� ��� '$%
8����#"���#�����5)2��4'�
8���"����#��-#���5���"��������"��
��#"����6' �
8���"�
�)2�������������"#����:'�
�=� ��"���� �����������:'&
52����������+��#����"#����:'
52������5)2��4':
��#�����#"���.��*�#��:'4:
� ���"���." ��:'&�
��������+" �������++��#"�"#����#��
'��
#"���+������:'4
H
F� �����������"�����#�" ������
+���� ':�
I
-�.������������6'�
-�.�����������"G������#��6'�
-�� �"���� ������ ��������������!'!
-�#�� ��#�� �#"���"����'$
-����#�����/�#���#����#��������+ ���
:'�
-����#���#��+�����#��������+ ����:'�
-#���5�#��)��""���+����!'$!
L
<�����"�����#.�������.�#���;6��
6' 4
<���#"������"��"���+��5)2��4' $
<���#"���� ������#��������+ ����:'�:
<��� �������#������'�
.�#�+"#���'�
�� �� �#��������#����� �#�������'%
�=�����#"� ����#�"�����'$$���'$�
+ �=". ����#������'$$
�����#"�� ����"��#������"����������
�'$$
�#�����#��#�"�������'%
"��������="��#"�����'$�
��#������'%
���"������������'$�
�����#����� �#�������'%
����������������="��#"�����'$�
��"��#������"������������'$$
<"��0"#���� �#"���"������#"����!'�:
<"��0-#���)� �#"���"��)��""���+���
!'�4
<�������"��"����#������� ���&'�:
<��������+" ��� ' :
Index
OneWorld Xe (9/00)
<���C����������"#��� ���� '
<��� ��� �������5)2��4'!
M
5�/��#�. ����'��
5�*�C#�C�������+"�"#"����$'�$
5�*�C#�C#��*����+"�"#"����$'�$
5���+��#�"��
�"��#���&'�
�"#".�#"����#����&'�
5���+��#�"��������"#".�#"���� ���"��
�#���"�#���#"����$'$�
#�������������#��$'�$
5���+��#�"�����#����""������#�������
+ ����:'�:
5���+��#�"��������� "�����*.�����
����"�����#"����4' �
5���"�����##"������;����6'�4
5�#�������#"�������� ��������#"���+�
���#"#"���"#����&'��
5�#������� �
�����#"���+��� �"#����:'$�
�����#"���+��� ��#���"#����:'�&
5�#������� ��+��� �"#���������#"���
:'$$
5�#������� "��
�� #"C ��� ��:'&$
"�� �� ��� ��:'$
5�#�"� �� ���"����+�#���#����������
$'�%
5�#�"� �� ���"�������#"��������"���
$'$�
5��������"����$'�!
5���������"����$'�!
5�������#�" ����"��"���� ' �
5������"� ���+������:'4
5�����#������##"�������!':
5������������������#�����#�������
+ ����:'�:
5����
� ��"����:':%
�� �#���� ':�
�� �#"����:' !
�)2052�05)2��('$
�� ��� ':�
"�.������6'�
� ��"�������� ���:':�
������"������� "��#"����:':&
����"�����#���#"�� ���:':�
����"���+��������������:':
����"���+����*������:':�
�#"��"���� ������ ' %
��*"����"#���:' &
5�����+��5)2����*"����"#���4'$
52�
��#"����������('$
�����#"���+��.�#���." ��&'�
�����#"���+��#��������"���#���&'$4
@���#"#��#�����:'�%
��"��"���.�#�����#��#��&'$�
��"��"����������#��#��&'$4
��"��"������#"#"�����#��#��&'�$
52������5)2���"++�������4'
52�� ����� ':
�� �� �#"���+���"#"�� ���*����#��� ':4
52�0�)205)2����� � �����"����:'&&
5)2
." ��+���#�"� ��4'!
��#��� ��#"����4'�
+�G��������4'�
�����#"���#�����4'�
��� ��� �������4'!
��� � �����"����4'�
2�� � �����"����5)2��&'$4���'$ ��%'$!�
%' $
5)2
'�������5�#�"� ��@�"����#�� ���"��
��#"����������('$
"���#��4'$
��#��#��4'�
����"�����*������������4'$&
���"����++��#"�� ���4'4
5)2�����52����"++�������4'
5)2���#�" ����������"��"����4'$:
5)2�������������#"�������� "�
����� ���%'$!
5)2��#������� ��������*����� ����
��"��"���� '4�
5)2���� ����������������"��"����4'$�
5)2�#"����"�����"��"����4'$$
5� #"+��" "#���+����#�������#"�����' �
5� #"+��" "#���)2052�05)2�7) :� 9�
����"�����#"�����'$:
5� #"C+��" "#��� ���"�����##"��������'4
5� #"C+��" "#��� ���������#"�����'$
Manufacturing and Distribution Planning
OneWorld Xe (9/00)
5� #"C+��" "#��#"����"�����"��"�����'�!
5� #"C ��� ���#������� �
�##"��������#��*"���#�����!'$:
�##"������������ "���� ���!'$
5� #"C ��� ���#������� "����� ���"��
." ��:'&$
N
D���#"���(�20(�2;��:'�%
D�#�����������"��"���"#����:'�
D�#��������+ ��
." ��+���#�"� ���#���:'�:
��#�" ���������"����:'�:
+����#���""����:'�:
"����#�����/�#���#��:'�
"����#���#��+���:'�
���#"���� ����:'�:
����+��#�"�����#����""����:'�:
�������������������#���:'�:
��#����������"����:'�:
�������������#���:'�:
���#������@���#"#"���:'�:
� ��������#���:'�:
��*�������#���:'�
��*�����"����#������� �#"����:'�
��*�����"����#���"����:'�
D�#��������+ ������#� ��"�� �� ��� ���#�
����� ���:'�
D�#��������+ �������#���"�� �� ��� ���#�
����� ���:'�4
D�#��������)��"��������"�����#"���
:'�&
D�#����������"������#��������+ ����:'�:
O
����#"����"��#���-�@�"�������"��
��#"���� ':%
������#�" �'�2����--�+����:'4�
������#�" �+����:'4�
������ "���� ����##"�������!'$�
����#�#�����*������������:':
��#.�����"#���.� ������6' !
��#.������.�#���;6���6' 4
��� ������#"���+����� ��� "���� '4�
����"����+����#"�����'4
P
5)2����� � �����"����&'$4���'$ ��%'$!�
%' $
2�� � �����"��
5)2��&'%
52�0�)20522��:'&&
5)2��4'�
����#���"�����'�$
2�#� "#���""����:'�
2�#� "#��.#"#�#���:'�
2�#�����#"���.��*�#��+����#
������#"����:'4:
2���"�������������"��"����4'$!
2���"���-�@�"�������"�����#"����4'$�
2����#������������ ' :
2����#�����+��#���� �������:'&:
2�"�������"�
��"��"���� ' &
��"��"���+���)2�� '4!
��"��"���+��)��2�� ':&
2�"���������������"�����#"���� ' �
2 ��"�������������� ���:':�
2 ����������7O2<�9��@���#"#��#����+�
5)2��4'$�
2 �����������=#��#"��������"��
��#"����6' &
2 ���������
�=� ��"����:'&�
�=��#"���#�����E��#��6' 4
2 ��������*�����7'2<�9��@���#"#��#���
+��5)2��4'$�
2 ���"���." �+����#���'4
2 ���"���." ���� #"C ��� ���#�
����� "����:'&$
2 ���"���+��" "�����"��"���+��5)2��4'$�
2 ���"���+��" �������"���������+��
:':!
2 ���"���+������:'4
2 ���"�����"G���#"�����"����+����#
������#"����:'4:
2 ��#�����+��#�"�����#��+���72:$��!9�
!'$
2"��� ����� ' :
2"�#"�������� "������� ���%' $
Index
OneWorld Xe (9/00)
2����"���#��������#"���52���&'$4
2��������+��#�"��
.�#�������"����&'$
���#"���������"����&'$:
2���"��� ������"��"����6' �
2���"����������+����� ���"���+��" ��
:':!
2���"�����������#���#"�� ���:':�
2���"����� #"C+��" "#��#��+�����
��������'��
2���"�����#"�����)20)��2�2 ���"��
)������#"���� '::
2���"�����#"��
6" ��+�5�#�"� �-�@�"���4' $
6" ��+�5�#�"� �)��""����&'&
6�����)� �#"���"��)��""�����'$�
�����"#��<����� ' &
�����"#��5������������� ' :
�����"#��2 ���"���5�����)��""���
':�
�����5���"���)��""����6'�!
�)2052����#�" �5�����)��""����:' �
�)2052���"�����"���:' �
�)2052�05)2��:'$
�=��#�-����#���6� �����#�����E��#�
6' !
8����#������ "�������� ��)���#��%'$�
8���"����#��-#���5���"����6' �
5���+��#�"��������� "�����*.�����
4' �
5� #"+��" "#���)2052�05)2�7) :� 9���'$:
D�#��������)��"����:'�&
����#"����"��#���-�@�"��� ':%
2���"���-�@�"���4'$�
2�"����������� ' �
2 �����������=#��#"����6' &
)�+���)������;�"#�� '$�
)������2�+" ��)������#"���� '�$
)������)�@�"����#�2 ���"���� '�!
�##"������+�����E��#��6'��
���� "�������� ��2"�#��%' $
���� "�������� ��)� ����8����#"���
%'��
���� "�������� ��)��""����%'�:
���� �������������-�@�"���4'$%
���� �0�������-�� �"���)� ���!'$�
A����������� ��5�#��)��""����%'%
��*����#��)������;�"#�� '$!
��*����#�������� ��)��"���� '4�
��*�����8����#"����:'4!
2���"��������:'4!
2���"�������+��5)2��4':$
2���"��������������������+�
5)2��4'$&
2���"������"�#����� "������� "���
%'4
2���"�����*������������:':�
2���"�����*�����������+��5)2�
4'$&
2���"�����*������:'4!
2���������-�
2 : �$�7��#�0������������ �9��%'��
2:$��!�7� ��#�����+��#�"�����#�9��!'$
2��������������"���+��G�������#���:':%
2������������#�����#��������+ ����:'�:
2����������������+��5)2�
����"����4'$&
2���������
����� "���"#����:':&
����"����������:':
Q
E���#"#��#���
�)2��:'��
�)2�����52���:'�!
52���:'�%
E���#"#��#����+��5)2
+"����*�����7'1��9��4'$�
� ����������7O2<�9��4'$�
� ��������*�����7'2<�9��4'$�
��*�����7O��9��4'$�
R
)�#������� �
�� �#"����!'�!
��� "��#"����!'�!
��"+�"����!'�&
)�#��������"#����� �� �#"���+���"#"�� ���*
���#��� ':�
)�#�����+" ��� ' :
)�#������#"�����#���#"�� ���!'�!
)��2
��"��"�����"�������"��� ':&
��*����#�� �������"��"���� ':4
Manufacturing and Distribution Planning
OneWorld Xe (9/00)
)�+���)������;�"#������"�����#"���
'$�
)� ��"�������� "������� ���%'�!
)���#"#"������"��"���52����#��#��&'�$
)���#"#"���"#���������#"�������#�
�����#"�������� ���&'��
)���#"#"�������+��#�"������+"�"������
�� "����!'��
)���#"#"�����#"������"+�"����!'��
)���#������@���#"#"�����#��������+ ���
:'�:
)���������������"#��� ���"��
+�#���#�����������$'��
����"����$'$!
)���������" �. ��� ' :
)��������+"�"#"����=��#���##"�������6'
)�������++�#�� ' 4
)��������+" �
��+"�"�������� ��� '�$
�����#"�����#���#"�� ��� '$%
)������2�+" ��71 � 9�� ' 4
)������2�+" ��)������#"��������"��
��#"���� '�$
)������2�+" ��)��""���+���� '��
)��������+" ��������#"�����#���#"�� ��
'$%
)�������@�"����#��"� �����##"������
!'
)������)�@�"����#�2 ���"���
����"�����#"���� '�!
)�������@�"����#�� ���"���7))29
��+"�"#"����$'$!
���C����������"#��� ���"���� '
��"��"����"��#��������� ' $
)�������@�"����#�� ������ "��#"���
':�
)��������"#�� ':�
�� �� �#"���� '$�
��#�"�������� ��� '$:
�����#"�����#���#"�� ��� '$$
)��"��"��
�"��#��������� '4&
�"��#��������+���)2��'���)��"��"��
�"��#�������
5)2��#������� ��������*����� ����
'���2���"�����#"���+������� �
��"��
5)2��#������� ��������*����
����� '4�
��"�������"��+���)2��'���)��"��"��
��*����#�� ���
��*����#�� ����� ' 4
��*����#�� ����+���)2�� '4&
'�������)��"��"�����*����#�� ���
)��"��"���.�#���." ��+���#�"� ��&':
)��"��"���.�#�����#��#�+���52���&'$�
)��"��"���.������ �#"���"����'$�
)��"��"��������"#���@�"����#�� ���
'44
)��"��"�����#�" ��������:' !
)��"��"����"��#��������+��))2�� ' $
)��"��"����)2052���"�����"���:'�!
)��"��"���"#��� ���#"���������'��
��+"�"���#����"#".�#"����"������72:�%$9
)��"��"���"#���+����#������� �
� ��#"����:'�4
)��"��"���"#���+����#���������:'�
)��"��"��� ���#"���+��5)2��4' $
)��"��"���5�������#�" �� ' �
)��"��"���5)2�����"�����������4'$!
)��"��"���5)2��#������� ��������*
���� ����� '4�
)��"��"���5)2���� ��������������4'$�
)��"��"���5)2�#"����"���4'$$
)��"��"���5)2���*������ �����#��
�"��#��� "#�� '4!
)��"��"����� #"C+��" "#��#"����"����'�!
)��"��"�����"�������"��� ' &
)��"��"�����"�������"��+���)2�� '4!
)��"��"�����"�������"��+��)��2�
':&
)��"��"���� ���"���+��" "��+��5)2��4'$�
)��"��"����������#��#�+���52�
�����#"����&'$4
)��"��"����#������� ��������*����#�
����� ':%
)��"��"����#������� �� �����&'�:
)��"��"������#"#"�����#��#�+���52���&'�$
)��"��"����������@�"����#�� ���
' $
)��"��"�������+ �����*.�����+��5)2�
4'��
)��"��"���#���2���"���<����6' �
)��"��"�����*����#�� ����+���)2�� '4&
)��"��"�����*����#�� ����+��)��2�� ':4
)��"��"�����*����#�� ����+��))2�� ' :
)��"��"�����*������ ��+�������#"��
#�#��� ':�
Index
OneWorld Xe (9/00)
)��""�������"���+�+����#��'��
8����#"�������"���+���#�" �+����#M
8����#"���������+����#
)��""���#���������+����#��'���)��""��
������+����#��"���#���1����������
�����
)�������#������"#���"� �����##"�������!':
)�������#������"#��� ���"���7)��29�
��+"�"#"����$'$!
)�������#������"#��� ���������#"���� ':�
)���"�����#.�����-#���6� ������6' !
S
�� ��������#�����#��������+ ����:'�:
������ �������#"����=���#"������#�
��"��"����%'$!
��##"���������������+"�"#"����=��#��6'
��##"��������#��*"���#������� #"C ���
��#������� ���!'$:
��##"��������#���=��#����#� ��6':
��##"������+��#���� �����������#����
:'&:
��##"������+ �#�+" ����'�+�������6'$:
��##"������+����#�������#"�����"���
!'$�
��##"������������#����+���)2��52��
5)2������)��2��!':
��##"�������� #"C+��" "#��� ���"�����'4
��##"������������ "���� ���!'$���!'$
��##"����������"�����#"����+�
���E��#��6'�$
��##"������#��*"���#�����!'$:
��##"������������+����#��'�����##"��
�����#�" �+����#M��������+����#
��##"��������� �������������"�� �"��
� ���!'!
��##"��������� ������������
� �#"���"����'4
��##"������#��������"#���@�"����#
�"� ����!':
��##"������#���� ���"����#����!'!
��##"������#����������@�"����#
�"� ����!':
��##"������#����������#������"#���"� ���
!':
��##"������#"���+������ ��+���)2����
52���!'4
��##"���;��;���5���"����6'�&
��##"��������"#�#�����!':
��"����#���##������+"�"����%'%
�����+ �����*.��������"��"���+��5)2�
4'��
�"�� �� ��� ���#������� �
��#��������+ ������#� ��:'�
��#��������+ �������#���:'�4
�"�� �� ��� ���#������� "��
��� "��#"����:'�
�)2�������������"#����:'�
52����������+��#����"#����:'
#"���+������:'4
�#�#"#"�� � ����+����#�����������'$
�#���+�����#"�������� "������� ���%'�
�#��*"���#�������+"�"���+������
����+��#�"����!'$&
�#��*"���#������##"�������!'$:
�������+����#���'4
���� "�����#��#�"�+���#"������+"�"����%'4
���� "������� �
���#"����%'�
�++��#"�����#��������%'�
���� "������� ����#��71: �$9��#�. ��
$'�!
���� "�������� ��2"�#������"�����#"���
%' $
���� "�������� ��)� ����8����#"���
����"�����#"����%'��
���� "�������� ��)��""��������"��
��#"����%'�:
���� "������� "��
. ��*�#������%'�
. ��*�#������ �����%'�
�� #"� ���%'$!
����"������"�#��%'4
���� "��� "#������#�������+"�"����%'$
���� "��� "#������#����71: �$$9��#�. ��
$'�!
���� ����������������"��"���+��5)2�
4'$�
���� �������������"�� �"���� ����##"��
����!'!
���� �������������-�@�"�������"��
��#"����4'$%
���� �������������� �#"���"�
�++��#"�"#����#����'&
"����#������" �." "#����'&
��*�����'&
�##"��������'4���'!
Manufacturing and Distribution Planning
OneWorld Xe (9/00)
���� �0�������-�� �"���)� �������"��
��#"����!'$�
���E��#��6'$
��#���"�#���#"��
�"#".�#"���������� ���"�����'&
����+��#�"��������"#".�#"���� ���"���
$'$�
��#�������#"�������� ����'&
��#�"� ��@�"����#�� ���"�����'&
�������@�"����#�� ���"�����'&
T
��. ���$'�4
(����6��*���'��
6����02 ��#�5�#����'��
6�"���;�"#�5�#����'��
��#�" �1����#���'��
1����#����������*���'��
-#���5�#����'��
)������2�+" ��71 � 9�� ' 4
�� ��F"#�����'��
�� ��������#�" ���'��
����������#��#���'��
�������1����#���'��
��� "������� ����#��71: �$9��$'�!
��� "��� "#������#����71: �$$9��$'�!
��������������#������+��#�"������
�"#".�#"���� ���"����$'�$
�"���.��*�#����#������+����#
������#"����:'4:
�"���+������ ���:'&
�##"�������!'4
�"���+������:'4
+��G��+������:'4
�������"� ���+������:'4
� ���"���+������:'4
"�� �� ��� ���#������� "����:'4
�"���+����� ��� "������ ����� '4�
�"����"�
���" �. ��#�����"���� �� �#"����:'�
���� �#"������" �. ��#�����"�
�� �� �#"����:'%
���"������" �. ���� �� �#"����:'�
+����#�������#"����� �� �#"����:'44
�� #"C+��" "#����'�!
��"��"���+��5)2��4'$$
�"����"���� �� �#"����:'!
���+�����������������"�����'��
���+����������+"�����"#�����'$
U
;�������"�����##"�������6'�4
;���#���"��������+"����������!'
;�"#�#������##"�������!'
V
A� "��#"�����#������� ��� ':$
A� "��#"�����#�"� ��@�"����#�� ���
'4 ��4' %
A� "��#"����������@�"����#�� ���
':�
A� "��#"���#��������"#���@�"����#�� ���
'4%
A����������� ��5�#��)��""���
����"�����#"����%'%
A����������� ��5�#��)��""���+���
%'!��%'$�
A�"+�"����#������� ���!'�&
A�"+�"������#"#"�����#"����!'��
W
���#����� ���"���." B��:'&$
���#����#���#"����"���� �� �#"��B��:'!
���#����#"���+������ �B��:'&
��*����#������� ':�
��*����#�� ���
��"��"����+��))2�� ' :
��"��"���+���)2�� '4&
��"��"���+��)��2�� ':4
��*����#��5�#��)��""���+���� '&
��*����#��)������;�"#������"��
��#"���� '$!
��*����#�������� ��)��"��������"��
��#"���� '4�
��*����#��;�"#�)������)��""���+���
'$4
��*����#�
����� ':�
��"���#��"�� ����"���)2�� '�&
Index
OneWorld Xe (9/00)
��*����
���"���+��G�������#���:'4$
+�G����5)2��4'�
��*�����7O��9��@���#"#��#����+��5)2�
4'$�
��*�������#�����#��������+ ����:'�
��*�����8����#"��������"��
��#"����:'4!
��*�����"����#������� �#"������#
�������+ ����:'�
��*�����"����#���"������#�������
+ ����:'�
��*����������
����#�#���:':
����"���+����#�"� ��@�"����#
� ����4'$&
��*����������"����������:':�
��*������ �����"��"���+�������#"��
#�#��� ':�
��*��"#��6�#���A�"���'�(��" �. �
A�"���+����6' 4
��*��"#��6" ��+�5�#�"� �+����:'&:��&'4
��*��"#��6�����)� �#"���"��+�����'!
��*��"#��6�����)� �#"���"��F"�����
+�����'$$
��*��"#����06�C2����#�2 ���"�����. �
+����!'$�
��*��"#�������5���"���+����6'�&
��*��"#����#���=��#����#� �+����6':
��*��"#����#�" �5�����+����&'�:
��*��"#����#�" �5�����+����:': �
:'::��4'$ ��&'$$��&'$!���'�%
��*��"#��1 �#�1" ����C)�+������+���
6'$:
��*��"#��1����#�������#"���)��""��
+����!'$�
��*��"#��-�#���#"���A�"���+����6'�$
��*��"#��-#���6�����+����!'�$
��*��"#��-#���5�#��6����+����!'$!
��*��"#��"#�����#��.����+��
72:$�$9��!'$4
��*��"#��<���#"���6�5�-�@�"��+���
4' $
��*��"#��<"��0-#���)� �#"���"�
)��""���+����!'�:
��*��"#��5���+��#�"�����*�����
:'4$
��*��"#������������ "���+����4'��
��*��"#��2���"���-�@�"��+����4'$!
��*��"#��2���"���<���+����6' %
��*��"#��)������2�+" ��)��""���+���
'�$
��*��"#��)������;�"#�+���� '$4
��*��"#��)��#"�������#"���+����!'��
��*��"#����� "��� "#������#����+���
%'$:
��*��"#������ �������������+����4'$%
��*��"#������ �0�������-�� �"���)� �
+����!'�
��*��"#���"�����"��+����&'�
��*��"#���"�����"��+����&'$$��&'$&�
�'��
��*��"#������������� ����#��+���
%'&
��*��"#����*����#��+���� '4
��*"����"#��.�#���� ���"����&'
��*"����"#���)2052����#��#��:' 4
��*"����"#����#�"� ��@�"����#�� ���
4'$$
��*"����"#���������:' &
��*"����"#��������+��5)2��4'$
��*"����"#���� #"C+��" "#��� �����'�!
��*"����"#���� #"C ��� ���#������� ��
:'&4
��*"����"#�������� ���"����&'$
��*"����"#�����#"#"���� ���"����&'$%
��*"����"#������� "���"�+���#"����4'$&
Manufacturing and Distribution Planning
OneWorld Xe (9/00)