Enroll an iOS device - Weight...
Transcript of Enroll an iOS device - Weight...
AirWatch Enroll iOS device Corporate – Version 2.1 Page 1 of 13
Enroll an iOS device
Getting started
Enrolling your devices with the AirWatch app is the only way to make sure our company information can
remain secure. Because of security requirements, in order to receive corporate emails on your phone,
you must enroll your phone to the Weight Watchers AirWatch environment. Please follow the following
instructions step-by-step to enroll your device.
AirWatch Installation and Enrollment Step-by-Step for iOS
This guide covers the installation of AirWatch for all devices running iOS (essentially, iPhones and iPads).
All versions of iOS are supported, even the newest iOS 8. Therefore, the steps should be the same:
remove corporate email account, install the AirWatch app, enroll, secure your device, and access your
emails.
1. Remove Email Account Before your start installing Airwatch, remove your corporate email account (Exchange ActiveSync) if you
currently receive your corporate emails on your device. Otherwise, move directly to section 2 of this
guide.
a) Tap Settings.
Before you start, make sure you are connected to a Wifi network, that you know your Apple ID and password, and that your device is fully charged or plugged in to a power source
AirWatch Enroll iOS device Corporate – Version 2.1 Page 2 of 13
b) Scroll down and tap Mail, Contacts,
Calendars.
c) Tap on your current Weight Watchers email
account
d) Tap on “Delete Account” at the bottom of the screen
AirWatch Enroll iOS device Corporate – Version 2.1 Page 3 of 13
2. Install AirWatch app
Tap on the App Store icon on your phone to be
taken to the iOS App Store.
a) Tap “Search” and enter “AirWatch” to
search for the app “
b) You will see the “AirWatch MDM Agent”
c) Tap the “Get” button to download
AirWatch MDM Agent
d) You will see the download button on
the AirWatch MDM Agent in the top
Use your existing Apple account to access the App Store or follow this link to create an Apple ID: https://appleid.apple.com/account
AirWatch Enroll iOS device Corporate – Version 2.1 Page 4 of 13
right corner of the screen. Tap on it to
begin the installation (you will be
prompted to enter your Apple ID and
password)
e) You will see the new app appear on
your phone when it is fully
downloaded
3. Enroll your device
Once the AirWatch MDM Agent has been
installed, open the application by tapping on the
AirWatch app on your home screen.
The first step is to establish a connection with
the AirWatch console.
a) You will be presented with a welcome
screen with an option to either “Please
enter your work email address” ex.
firstname.lastname@weightwatchers.
com
b) If you do not have a
weightwatchers.com email address
please contact the helpdesk.
AirWatch Enroll iOS device Corporate – Version 2.1 Page 5 of 13
c) Tap “Done” to close keyboard and
“Continue” to continue the installation
process.
d) Provide your WW user name and
password to authenticate your device.
e) Select Corporate – Dedicated when
enrolling your corporate device.
First tap on the arrow pointing down and
then selecting the ownership that
applies in the lower part of the screen.
Tap “Continue” when you are done
Log in with the “Username” and “Password”
AirWatch Enroll iOS device Corporate – Version 2.1 Page 6 of 13
Your web browser will briefly open and
close confirming that you authenticated
successfully and that you are now ready
to start enrollment
f) On the next screen you will be asked to
install a device profile.
i) Tap on “Install” button to begin the
installation process
AirWatch Enroll iOS device Corporate – Version 2.1 Page 7 of 13
g) You will then be prompted to enter your
device Passcode “The passcode must
not have ascending or descending
characters”
h) Tap “Install” to confirm installation of
Installation of Profile.
AirWatch Enroll iOS device Corporate – Version 2.1 Page 9 of 13
i) Once the profile has been installed, you
will receive a Profile Verified screen.
Please read the profile installation
warning, and proceed by tapping on
“Install.”
Note: This security warning applies to
WW data stored on the device. On
your corporate issued phone, this can
apply to all data on the device.
j) Tape “Trust” to allow enrollment of
device into remote management.
k) After the installation is completed tap
“Done” to proceed to next step.
Depending on your connection speed,
the enrollment phase may take some
time.
AirWatch Enroll iOS device Corporate – Version 2.1 Page 10 of 13
Your web browser will briefly open and close
again
l) Once the enrollment has completed, a
success screen will appear
Note: If you do not tap “Continue” within
a few minutes, the agent will
automatically redirect you to the next
screen)
m) The agent may ask you to share the
device’s location, Tap “Ok”
AirWatch Enroll iOS device Corporate – Version 2.1 Page 11 of 13
n) A successfully enrolled device will look
something like this:
AirWatch Enroll iOS device Corporate – Version 2.1 Page 12 of 13
4. Secure your device
a) Tap on the home button to get to the home
screen.
b) If you don’t have a 6-digit passcode, you will
be prompted to create a new one to secure
your device.
Note:
The passcode must be created within
60 minutes of installation. If you chose
to create passcode later, the device will
be prompting you every minute to create
one)
The passcode must be 6 numbers
minimum.
You now have installed and enrolled the
AirWatch MDM Agent on your iOS device
successfully! You can now proceed to access
your emails in the next steps.
AirWatch Enroll iOS device Corporate – Version 2.1 Page 13 of 13
5. Access your emails
To access your Weight Watchers email, tap on
the email app icon from the home screen and
enter your WW email password.
Your emails will be downloaded to your phone.
Depending on your connection speed, it may
take some time to sync your email with the
server, after which you should be able to access
your emails.