ENodeB Performance Monitoring Reference(Draft D)(PDF)-En

eNodeB

Performance Monitoring Reference

Issue Draft DDate 2014-03-26

HUAWEI TECHNOLOGIES CO., LTD.

Copyright Huawei Technologies Co., Ltd. 2014. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior writtenconsent of Huawei Technologies Co., Ltd. Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.All other trademarks and trade names mentioned in this document are the property of their respective holders. NoticeThe purchased products, services and features are stipulated by the contract made between Huawei and thecustomer. All or part of the products, services and features described in this document may not be within thepurchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,and recommendations in this document are provided "AS IS" without warranties, guarantees or representationsof any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in thepreparation of this document to ensure accuracy of the contents, but all statements, information, andrecommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd.Address: Huawei Industrial Base

Bantian, LonggangShenzhen 518129People's Republic of China

Website: http://www.huawei.comEmail: [email protected]

Issue Draft D (2014-03-26) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.

i

Contents

1 About This Document..................................................................................................................12 Change History..............................................................................................................................33 Introduction....................................................................................................................................83.1 Overview........................................................................................................................................................................83.2 Performance Monitoring Types......................................................................................................................................83.3 Precautions....................................................................................................................................................................113.3.1 Precautions for Monitoring on 3900 Series Base Stations........................................................................................113.3.2 Precautions for Monitoring on BTS3202Es and BTS3203Es...................................................................................123.3.3 Precautions for Monitoring on BTS3205Es..............................................................................................................123.3.4 General Parameter Input Description........................................................................................................................134 Cell Performance Monitoring...................................................................................................154.1 UL CoMP (Cell) Monitoring........................................................................................................................................154.1.1 Usage Scenario..........................................................................................................................................................154.1.2 Service Impact...........................................................................................................................................................154.1.3 Parameters.................................................................................................................................................................154.1.4 Monitoring Results....................................................................................................................................................164.2 Satisfaction of Service Monitoring...............................................................................................................................164.2.1 Usage Scenario..........................................................................................................................................................164.2.2 Service Impact...........................................................................................................................................................174.2.3 Parameters.................................................................................................................................................................174.2.4 Monitoring Results....................................................................................................................................................174.3 General Throughput Monitoring..................................................................................................................................194.3.1 Usage Scenario..........................................................................................................................................................194.3.2 Service Impact...........................................................................................................................................................194.3.3 Parameters.................................................................................................................................................................204.3.4 Monitoring Results....................................................................................................................................................204.4 Service Statistics Monitoring........................................................................................................................................244.4.1 Usage Scenario..........................................................................................................................................................254.4.2 Service Impact...........................................................................................................................................................254.4.3 Parameters.................................................................................................................................................................254.4.4 Monitoring Results....................................................................................................................................................25

eNodeBPerformance Monitoring Reference Contents


ii

4.5 User Statistics Monitoring............................................................................................................................................264.5.1 Usage Scenario..........................................................................................................................................................264.5.2 Service Impact...........................................................................................................................................................264.5.3 Parameters.................................................................................................................................................................264.5.4 Monitoring Results....................................................................................................................................................274.6 Usage of RB Monitoring..............................................................................................................................................294.6.1 Usage Scenario..........................................................................................................................................................294.6.2 Service Impact...........................................................................................................................................................294.6.3 Parameters.................................................................................................................................................................304.6.4 Monitoring Results....................................................................................................................................................304.7 ICIC (Cell) Monitoring.................................................................................................................................................324.7.1 Usage Scenario..........................................................................................................................................................324.7.2 Service Impact...........................................................................................................................................................324.7.3 Parameters.................................................................................................................................................................324.7.4 Monitoring Results....................................................................................................................................................324.8 Multi-User MIMO Monitoring.....................................................................................................................................354.8.1 Usage Scenario..........................................................................................................................................................354.8.2 Service Impact...........................................................................................................................................................354.8.3 Parameters.................................................................................................................................................................354.8.4 Monitoring Results....................................................................................................................................................364.9 RSSI Statistic Monitoring.............................................................................................................................................364.9.1 Usage Scenario..........................................................................................................................................................364.9.2 Service Impact...........................................................................................................................................................364.9.3 Parameters.................................................................................................................................................................364.9.4 Monitoring Results....................................................................................................................................................374.10 Interference Detection Monitoring.............................................................................................................................394.10.1 Usage Scenario........................................................................................................................................................394.10.2 Service Impact.........................................................................................................................................................394.10.3 Parameters...............................................................................................................................................................404.10.4 Monitoring Results..................................................................................................................................................404.11 TDD Interference Detection Monitoring....................................................................................................................424.11.1 Usage Scenario........................................................................................................................................................424.11.2 Service Impact.........................................................................................................................................................424.11.3 Parameters...............................................................................................................................................................424.11.4 Monitoring Results..................................................................................................................................................434.12 Multi-User BF (Cell) Monitoring...............................................................................................................................454.12.1 Usage Scenario........................................................................................................................................................454.12.2 Service Impact on....................................................................................................................................................454.12.3 Parameters...............................................................................................................................................................454.12.4 Monitoring Results..................................................................................................................................................464.13 Scheduled Users Statistic Monitoring........................................................................................................................50



iii

4.13.1 Usage Scenario........................................................................................................................................................504.13.2 Service Impact.........................................................................................................................................................504.13.3 Parameters...............................................................................................................................................................514.13.4 Monitoring Results..................................................................................................................................................514.14 HARQ Statistic Monitoring........................................................................................................................................524.14.1 Usage Scenario........................................................................................................................................................524.14.2 Service Impact.........................................................................................................................................................524.14.3 Parameters...............................................................................................................................................................524.14.4 Monitoring Results..................................................................................................................................................524.15 DCI Statistic Monitoring............................................................................................................................................574.15.1 Usage Scenario........................................................................................................................................................574.15.2 Service Impact.........................................................................................................................................................574.15.3 Parameters...............................................................................................................................................................574.15.4 Monitoring Results..................................................................................................................................................584.16 DRB Statistics Monitoring.........................................................................................................................................594.16.1 Usage Scenario........................................................................................................................................................594.16.2 Service Impact.........................................................................................................................................................594.16.3 Parameters...............................................................................................................................................................594.16.4 Monitoring Results..................................................................................................................................................604.17 Idle MLB Monitoring.................................................................................................................................................644.17.1 Usage Scenario........................................................................................................................................................644.17.2 Service Impact.........................................................................................................................................................644.17.3 Parameters...............................................................................................................................................................644.17.4 Monitoring Results..................................................................................................................................................644.18 MLB Monitoring........................................................................................................................................................654.18.1 Usage Scenario........................................................................................................................................................654.18.2 Service Impact.........................................................................................................................................................654.18.3 Parameters...............................................................................................................................................................654.18.4 Monitoring Results..................................................................................................................................................674.19 eICIC CEU Throughput Monitoring..........................................................................................................................924.19.1 Usage Scenario........................................................................................................................................................924.19.2 Service Impact.........................................................................................................................................................934.19.3 Parameters...............................................................................................................................................................934.19.4 Monitoring Results..................................................................................................................................................934.20 eICIC Statistic for CRE Area Monitoring..................................................................................................................954.20.1 Usage Scenario........................................................................................................................................................954.20.2 Service Impact.........................................................................................................................................................954.20.3 Parameters...............................................................................................................................................................954.20.4 Monitoring Results..................................................................................................................................................954.21 DL CoMP (Cell) Monitoring....................................................................................................................................1004.21.1 Usage Scenario......................................................................................................................................................100



iv

4.21.2 Service Impact.......................................................................................................................................................1004.21.3 Parameters.............................................................................................................................................................1004.21.4 Monitoring Results................................................................................................................................................1004.22 Cell-Level Interference Randomization...................................................................................................................1014.22.1 Usage Scenario......................................................................................................................................................1014.22.2 Service Impact.......................................................................................................................................................1014.22.3 Parameters.............................................................................................................................................................1014.22.4 Monitoring Results................................................................................................................................................1025 User Performance Monitoring................................................................................................1035.1 UL CoMP (User) Monitoring.....................................................................................................................................1035.1.1 Usage Scenario........................................................................................................................................................1035.1.2 Service Impact.........................................................................................................................................................1035.1.3 Parameters...............................................................................................................................................................1035.1.4 Monitoring Results..................................................................................................................................................1045.2 VQI Monitoring..........................................................................................................................................................1045.2.1 Usage Scenario........................................................................................................................................................1045.2.2 Service Impact.........................................................................................................................................................1045.2.3 Parameters...............................................................................................................................................................1055.2.4 Monitoring Results..................................................................................................................................................1055.3 DL RSRP/RSRQ Monitoring.....................................................................................................................................1075.3.1 Usage Scenario........................................................................................................................................................1075.3.2 Service Impact.........................................................................................................................................................1075.3.3 Parameters...............................................................................................................................................................1075.3.4 Monitoring Results..................................................................................................................................................1085.4 BLER Monitoring.......................................................................................................................................................1085.4.1 Usage Scenario........................................................................................................................................................1085.4.2 Service Impact.........................................................................................................................................................1085.4.3 Parameters...............................................................................................................................................................1095.4.4 Monitoring Results..................................................................................................................................................1095.5 Power Headroom Monitoring.....................................................................................................................................1125.5.1 Usage Scenario........................................................................................................................................................1125.5.2 Service Impact.........................................................................................................................................................1125.5.3 Parameters...............................................................................................................................................................1125.5.4 Monitoring Results..................................................................................................................................................1135.6 Quality of Channel Monitoring..................................................................................................................................1145.6.1 Usage Scenario........................................................................................................................................................1145.6.2 Service Impact.........................................................................................................................................................1145.6.3 Parameters...............................................................................................................................................................1145.6.4 Monitoring Results..................................................................................................................................................1155.7 Scheduling Monitoring...............................................................................................................................................1185.7.1 Usage Scenario........................................................................................................................................................118



v

5.7.2 Service Impact.........................................................................................................................................................1185.7.3 Parameters...............................................................................................................................................................1185.7.4 Monitoring Results..................................................................................................................................................1195.8 RLC Data Stream Monitoring....................................................................................................................................1215.8.1 Usage Scenario........................................................................................................................................................1225.8.2 Service Impact.........................................................................................................................................................1225.8.3 Parameters...............................................................................................................................................................1225.8.4 Monitoring Results..................................................................................................................................................1225.9 Throughput Monitoring..............................................................................................................................................1235.9.1 Usage Scenario........................................................................................................................................................1235.9.2 Service Impact.........................................................................................................................................................1235.9.3 Parameters...............................................................................................................................................................1235.9.4 Monitoring Results..................................................................................................................................................1245.10 AQM Monitoring......................................................................................................................................................1265.10.1 Usage Scenario......................................................................................................................................................1265.10.2 Service Impact.......................................................................................................................................................1265.10.3 Parameters.............................................................................................................................................................1275.10.4 Monitoring Results................................................................................................................................................1275.11 UL Power Control Monitoring.................................................................................................................................1285.11.1 Usage Scenario......................................................................................................................................................1285.11.2 Service Impact.......................................................................................................................................................1285.11.3 Parameters.............................................................................................................................................................1285.11.4 Monitoring Results................................................................................................................................................1295.12 DL Power Control Monitoring.................................................................................................................................1305.12.1 Usage Scenario......................................................................................................................................................1305.12.2 Service Impact.......................................................................................................................................................1305.12.3 Parameters.............................................................................................................................................................1305.12.4 Monitoring Results................................................................................................................................................1315.13 ICIC (User) Monitoring............................................................................................................................................1335.13.1 Usage Scenario......................................................................................................................................................1335.13.2 Service Impact.......................................................................................................................................................1335.13.3 Parameters.............................................................................................................................................................1335.13.4 Monitoring Results................................................................................................................................................1345.14 MCS Count Monitoring............................................................................................................................................1365.14.1 Usage Scenario......................................................................................................................................................1365.14.2 Service Impact.......................................................................................................................................................1375.14.3 Parameters.............................................................................................................................................................1375.14.4 Monitoring Results................................................................................................................................................1375.15 Multi-User BF (User) Monitoring............................................................................................................................1405.15.1 Usage Scenario......................................................................................................................................................1405.15.2 Service Impact.......................................................................................................................................................140



vi

5.15.3 Parameters.............................................................................................................................................................1405.15.4 Monitoring Results................................................................................................................................................1415.16 SFN Detection Monitoring.......................................................................................................................................1425.16.1 Usage Scenario......................................................................................................................................................1425.16.2 Service Impact.......................................................................................................................................................1425.16.3 Parameters.............................................................................................................................................................1425.16.4 Monitoring Results................................................................................................................................................1435.17 Cell Combination Monitoring..................................................................................................................................1465.17.1 Usage Scenario......................................................................................................................................................1465.17.2 Service Impact.......................................................................................................................................................1465.17.3 Parameters.............................................................................................................................................................1465.17.4 Monitoring Results................................................................................................................................................1475.18 eICIC (User) Monitoring..........................................................................................................................................1495.18.1 Usage Scenario......................................................................................................................................................1505.18.2 Impact on Services.................................................................................................................................................1505.18.3 Parameters.............................................................................................................................................................1505.18.4 Monitoring Results................................................................................................................................................1515.19 DL CoMP (User) Monitoring...................................................................................................................................1545.19.1 Usage Scenario......................................................................................................................................................1545.19.2 Impact on Services.................................................................................................................................................1545.19.3 Parameters.............................................................................................................................................................1555.19.4 Monitoring Results................................................................................................................................................1556 Device Monitoring....................................................................................................................1576.1 CPRI BER Monitoring...............................................................................................................................................1576.1.1 Usage Scenario........................................................................................................................................................1576.1.2 Service Impact.........................................................................................................................................................1576.1.3 Parameters...............................................................................................................................................................1576.1.4 Monitoring Results..................................................................................................................................................1586.2 CPU Usage Monitoring..............................................................................................................................................1596.2.1 Usage Scenario........................................................................................................................................................1596.2.2 Service Impact.........................................................................................................................................................1596.2.3 Parameters...............................................................................................................................................................1596.2.4 Monitoring Results..................................................................................................................................................1606.3 RRU/RFU/BRU Output Power Monitoring...............................................................................................................1606.3.1 Usage Scenario........................................................................................................................................................1606.3.2 Service Impact.........................................................................................................................................................1606.3.3 Parameters...............................................................................................................................................................1616.3.4 Monitoring Results..................................................................................................................................................1616.4 Board Temperature Monitoring..................................................................................................................................1626.4.1 Usage Scenario........................................................................................................................................................1626.4.2 Service Impact.........................................................................................................................................................162



vii

6.4.3 Parameters...............................................................................................................................................................1636.4.4 Monitoring Results..................................................................................................................................................1636.5 Clock Quality Test Monitoring...................................................................................................................................1646.5.1 Usage Scenario........................................................................................................................................................1646.5.2 Service Impact.........................................................................................................................................................1646.5.3 Parameters...............................................................................................................................................................1646.5.4 Monitoring Results..................................................................................................................................................1656.6 IP Clock Data Collection Monitoring.........................................................................................................................1656.6.1 Usage Scenario........................................................................................................................................................1656.6.2 Service Impact.........................................................................................................................................................1656.6.3 Parameters...............................................................................................................................................................1666.6.4 Monitoring Results..................................................................................................................................................1666.7 RRU/RFU Output Power Monitoring.........................................................................................................................1676.7.1 Usage Scenario........................................................................................................................................................1676.7.2 Service Impact.........................................................................................................................................................1676.7.3 Parameters...............................................................................................................................................................1676.7.4 Monitoring Results..................................................................................................................................................1686.8 Rx Frequency Scanning..............................................................................................................................................1696.8.1 Usage Scenario........................................................................................................................................................1696.8.2 Service Impact.........................................................................................................................................................1696.8.3 Parameters...............................................................................................................................................................1696.8.4 Monitoring Results..................................................................................................................................................1706.9 DTF Test.....................................................................................................................................................................1716.9.1 Usage Scenario........................................................................................................................................................1716.9.2 Service Impact.........................................................................................................................................................1716.9.3 Parameters...............................................................................................................................................................1716.9.4 Monitoring Results..................................................................................................................................................1726.10 FFT Frequency Scan.................................................................................................................................................1736.10.1 Usage Scenario......................................................................................................................................................1736.10.2 Service Impact.......................................................................................................................................................1736.10.3 Parameters.............................................................................................................................................................1736.10.4 Monitoring Results................................................................................................................................................1746.11 AAS..........................................................................................................................................................................1756.11.1 Usage Scenario......................................................................................................................................................1756.11.2 Service Impact.......................................................................................................................................................1756.11.3 Parameters.............................................................................................................................................................1766.11.4 Monitoring Results................................................................................................................................................1766.12 Frequency Scanning Intermodulation Interference Detection Monitoring...............................................................1776.12.1 Usage Scenario......................................................................................................................................................1776.12.2 Service Impact.......................................................................................................................................................1776.12.3 Parameters.............................................................................................................................................................177



viii

6.12.4 Monitoring Results................................................................................................................................................1787 Transport Performance Monitoring.......................................................................................1807.1 Local Pass-By Traffic Monitoring..............................................................................................................................1807.1.1 Usage Scenario........................................................................................................................................................1807.1.2 Service Impact.........................................................................................................................................................1807.1.3 Parameters...............................................................................................................................................................1807.1.4 Monitoring Results..................................................................................................................................................1817.2 IP Performance Monitoring........................................................................................................................................1817.2.1 Usage Scenario........................................................................................................................................................1817.2.2 Service Impact.........................................................................................................................................................1817.2.3 Parameters...............................................................................................................................................................1827.2.4 Monitoring Results..................................................................................................................................................1827.3 Transport Port Flux Stat Monitoring..........................................................................................................................1837.3.1 Usage Scenario........................................................................................................................................................1837.3.2 Service Impact.........................................................................................................................................................1837.3.3 Parameters...............................................................................................................................................................1837.3.4 Monitoring Results..................................................................................................................................................1857.4 Transport Link Flux Stat Monitoring.........................................................................................................................1927.4.1 Usage Scenario........................................................................................................................................................1927.4.2 Service Impact.........................................................................................................................................................1927.4.3 Parameters...............................................................................................................................................................1927.4.4 Monitoring Results..................................................................................................................................................1947.5 UDP Test Monitoring.................................................................................................................................................1997.5.1 Usage Scenario........................................................................................................................................................1997.5.2 Service Impact.........................................................................................................................................................1997.5.3 Parameters...............................................................................................................................................................2007.5.4 Monitoring Results..................................................................................................................................................2017.6 PPPoE Monitoring......................................................................................................................................................2027.6.1 Usage Scenario........................................................................................................................................................2027.6.2 Service Impact.........................................................................................................................................................2027.6.3 Parameters...............................................................................................................................................................2027.6.4 Monitoring Results..................................................................................................................................................2037.7 IPSec Performance Monitoring..................................................................................................................................2047.7.1 Usage Scenario........................................................................................................................................................2047.7.2 Service Impact.........................................................................................................................................................2047.7.3 Parameters...............................................................................................................................................................2057.7.4 Monitoring Results..................................................................................................................................................2057.8 Transport OAM Monitoring.......................................................................................................................................2067.8.1 Usage Scenario........................................................................................................................................................2067.8.2 Service Impact.........................................................................................................................................................2067.8.3 Parameters...............................................................................................................................................................206



ix

7.8.4 Monitoring Results..................................................................................................................................................2067.9 Transport Auto Setup User Plane Monitoring............................................................................................................2097.9.1 Usage Scenario........................................................................................................................................................2097.9.2 Service Impact.........................................................................................................................................................2097.9.3 Parameters...............................................................................................................................................................2097.9.4 Monitoring Results..................................................................................................................................................2108 RRU/RFU Performance Monitoring.......................................................................................2138.1 Sector Performance Monitoring.................................................................................................................................2138.1.1 Usage Scenario........................................................................................................................................................2138.1.2 Service Impact.........................................................................................................................................................2138.1.3 Parameters...............................................................................................................................................................2138.1.4 Monitoring Results..................................................................................................................................................214



x

1 About This DocumentPurpose

This document describes the information about eNodeB-related performance monitoring tasks,including:l The descriptions of parameters for performance monitoringl The descriptions of monitor itemsl The value range of each monitor iteml The formula used to calculate the value of each monitor item

Product VersionsThe following table lists the product version related to this document.

Product Name Product VersionDBS3900 V100R009C00

The mapping single-mode base station version is:eNodeB: V100R007C00

DBS3900 TDDBTS3900BTS3900ABTS3900LBTS3900ALBTS3202EBTS3203E LTE V100R009C00BTS3205E V100R009C00

NOTE

In this document, BTS3203E refers to the BTS3203E LTE.

eNodeBPerformance Monitoring Reference 1 About This Document


1

Intended AudienceThis document is intended for:l System engineersl Site maintenance engineers

eNodeBPerformance Monitoring Reference 1 About This Document


2

2 Change HistoryThe following describes the changes in eNodeB Performance Monitoring Reference.The document issues are as follows:l Draft D (2014-03-26)l Draft C (2014-02-28)l Draft B (2014-02-10)l Draft A (2014-01-27)

Draft D (2014-03-26)This is the release of Draft D.Compared with Draft C (2014-02-28), this issue does not include any new information.Compared with Draft C (2014-02-28), this issue includes the following changes:

Topic Change History4.10.4 Monitoring Results Changed Max RB Number of PUCCH in

the monitoring result to Max Number ofUsed PUCCH RBs and modified itsdescription.

No information in Draft C (2014-02-28) is deleted from this issue.

Draft C (2014-02-28)This is the release of Draft C.Compared with Draft B (2014-02-10), this issue does not include the any new information.Compared with Draft B (2014-02-10), this issue includes the following changes:

eNodeBPerformance Monitoring Reference 2 Change History


3

Topic Change Description4.5.4 Monitoring Results Modified the description of the parameters CN

Operator Keep UL Synch Users Number, CNOperator General Users Number, and CNOperator NO-Activated Users Number.

4.6.4 Monitoring Results Modified the value range of the parametersDownlink Equivalent Used RB Num, UplinkEquivalent Used RB Num, Downlink FreqDiversity Used RB Num, Downlink Freq SelectUsed RB Num, Downlink Harq RB Used RBNum, and Downlink power off RB Num.

4.8.4 Monitoring Results Modified the value range of the parameter MIMOUE Pair Num.

4.18.4 Monitoring Results Deleted the parameter DlEarfcnNum.

No informations in Draft B (2014-02-10) is deleted from this issue.

Draft B (2014-02-10)This is the release of Draft B.Compared with Draft A (2014-01-27), this issue includes the following new information.l 4.21 DL CoMP (Cell) Monitoringl 4.22 Cell-Level Interference Randomizationl 5.19 DL CoMP (User) MonitoringCompared with Draft A (2014-01-27), this issue includes the following changes:

Topic Change Description5.16 SFN Detection Monitoring Modified 5.16.3 Parameters and 5.16.4

Monitoring Results.5.17 Cell Combination Monitoring Modified 5.17.3 Parameters and 5.17.4

Monitoring Results.

No informations in Draft A (2014-01-27) is deleted from this issue.

Draft A (2014-01-27)This is the release of Draft A.Compared with issue 05 (2013-08-01) of V100R006C00, this issue includes the following newinformation.



4

Idle MLB Monitoring4.19 eICIC CEU Throughput Monitoring4.19 eICIC CEU Throughput MonitoringCompared with issue 05 (2013-08-01) of V100R006C00, this issue includes the followingchanges:

Topic Change Description3.3.2 Precautions for Monitoring onBTS3202Es and BTS3203Es

Modified the value range of Local Cell ID.

4.3.3 Parameters Added the parameter Save File.4.5.3 Parameters4.6.4 Monitoring Results Updatad the value range and description in Table

4-16.4.9.4 Monitoring Results Modified the description of parameter antenna[y]

RSSI in Table 4-27.4.18.3 Parameters Added the parameter PLMN ID of Local Cell.

Updated the results of MLB monitoring in Table4-48.4.18.4 Monitoring Results

5.12.4 Monitoring Results Updated the description of parameter PowerOffset of PDCCH in Table 5-34.

5.6.4 Monitoring Results Updated the parameter of CQI in Table 5-16.Modified the value range of the parameterEffective Len in Table 5-16.

5.16.3 Parameters Updated the context in the section Test TypeBitmap.

5.16.4 Monitoring Results Updated the context in the parameter Uplink SRSRSRP.Modified the value range of the parameters ULRRU Flag and DL RRU Flag in Table 5-46.

7.1.4 Monitoring Results Modified the eNodeB Bypass Traffic to BypassTraffic in Table 7-2.

7.2.4 Monitoring Results Modified the parameters in Table 7-4.l Modified the Number increment of RX to

Receive Packets.l Modified the Number increment of TX to

Send Packets.l Modified the Number increment of

discarded packets to Receive Drop Packets.



5

Topic Change Description7.3.3 Parameters Modified the description of the paremeter Sub

Board Type in Table 7-5.Updated the description of the parameter ExtendOption Table 7-5.

7.3.3 Parameters Modified the monitoring results in Table 7-5.l Deleted the RX Packets Discard Ratio of IP

Layer, TX Packets Discard Ratio of IPLayer, RX Packets Discard Ratio of LinkLayer, TRX Packets Discard Ratio of LinkLayer, RX Packets number of Link Level,and TX Packets number of Link Level.

l Added the Rx Traffic, Tx Traffic, Rx Packets,Tx Packets, Rx Loss Packets, and Tx LossPackets.

7.4.4 Monitoring Results Modified the parameters in Table 7-8.l Modified RX Rate of OMCH to RX Rate.l Modified TX Rate of OMCH to TX Rate.Modified the parameters in Table 7-9.l Modified Path Index to Index.l Modified Path ID to Flag.l Modified RX Rate of IPPATH to RX Rate.l Modified TX Rate of IPPATH to TX Rate.Modified the parameters in Table 7-10.l Modified RX Rate of SCTP to RX Rate.l Modified TX Rate of SCTP to TX Rate.l Modified Receive Error Packets of SCTP to

RX Error Packets.l Modified Retransmit Ratio of SCTP to

Resend Trunk Rate.l Modified RX Packet Discard Rate of SCTP

to RX Packet Discard Rate.7.9.3 Parameters Modified the description of the parameter IPPM

Flag in 7.9.3 Parameters.7.9.4 Monitoring Results Modified the value range and description of

parameter Test Type in Table 7-21.All Changed the name of Huawei mobile element

management system from M2000 to U2000.

No informations in issue 05 (2013-08-01) of V100R006C00 is deleted from this issue.



6



7

3 Introduction3.1 Overview

Performance monitoring is used to monitor the equipment running status and service status ofeNodeBs by using iManager U2000 Mobile Element Management System (referred to as U2000)or the local maintenance terminal (LMT). Monitoring results are displayed in tables or charts.In this way, equipment can be maintained and faults can be rectified by analyzing the exceptionsshown in monitoring results.

3.2 Performance Monitoring TypesTable 3-1 Performance monitoring types

Type Task PlatformCell Performance Monitoring UL CoMP (Cell) Monitoring U2000

Satisfaction of ServiceMonitoring

U2000

General ThroughputMonitoring

U2000&LMT

Service StatisticsMonitoring

U2000

User Statistics Monitoring U2000&LMTUsage of RB Monitoring U2000ICIC (Cell) Monitoring U2000Multi-User MIMOMonitoring

U2000

RSSI Statistic Monitoring U2000

eNodeBPerformance Monitoring Reference 3 Introduction


8

Type Task PlatformInterference DetectionMonitoring

U2000&LMT

TDD Interference DetectionMonitoring

U2000

Multi-User BF (Cell)Monitoring

U2000

Scheduled Users StatisticMonitoring

U2000

HARQ Statistic Monitoring U2000DCI Statistic Monitoring U2000DRB Statistics Monitoring U2000MLB Monitoring U2000eICIC CEU ThroughputMonitoring

U2000

eICIC Statistic for CRE AreaMonitoring

U2000

DL CoMP (Cell) Monitoring U2000Cell-Level InterferenceRandomization

U2000

User PerformanceMonitoring

UL CoMP (User)Monitoring

U2000

VQI Monitoring U2000DL RSRP/RSRQMonitoring

U2000

BLER Monitoring U2000Power HeadroomMonitoring

U2000

Quality of ChannelMonitoring

U2000

Scheduling Monitoring U2000RLC Data StreamMonitoring

U2000

Throughput Monitoring U2000AQM Monitoring U2000



9

Type Task PlatformUL Power ControlMonitoring

U2000

DL Power ControlMonitoring

U2000

ICIC (User) Monitoring U2000MCS Count Monitoring U2000Multi-User BF (User)Monitoring

U2000

SFN Detection Monitoring U2000Cell CombinationMonitoring

U2000

eICIC (User) Monitoring U2000DL CoMP (User)Monitoring

U2000

Device Monitoring CPRI BER Monitoring U2000CPU Usage Monitoring U2000&LMTRRU/RFU/BRU OutputPower Monitoring

U2000

Board TemperatureMonitoring

U2000&LMT

Clock Quality TestMonitoring

U2000&LMT

IP Clock Data CollectionMonitoring

U2000&LMT

RRU/RFU Output PowerMonitoring

LMT

Rx Frequency Scanning LMTDTF Test LMTFFT Frequency Scan LMTAAS LMTFrequency ScanningIntermodulation InterferenceDetection

LMT

Transport PerformanceMonitoring

Local Pass-By TrafficMonitoring

U2000&LMT



10

Type Task PlatformIP Performance Monitoring U2000&LMTTransport Port Flux StatMonitoring

U2000&LMT

Transport Link Flux StatMonitoring

U2000&LMT

UDP Test Monitoring U2000PPPoE Monitoring U2000&LMTIPSec PerformanceMonitoring

U2000&LMT

Transport OAM Monitoring LMTTransport Auto Setup UserPlane Monitoring

U2000&LMT

RRU/RFU PerformanceMonitoring

Sector PerformanceMonitoring

LMT

3.3 PrecautionsThis section describes the precautions for monitoring on 3900 series base stations andBTS3202Es, BTS3203Es, and BTS3205Es.

NOTE

This issue do not support the following monitoring tasks:l LTE IP Link Monitoringl LTE IP Path Performance Monitoringl LTE SCTP Performance Monitoringl LTE Resource Group Monitoring

3.3.1 Precautions for Monitoring on 3900 Series Base Stations3900 series base stations do not support the PPPoE Monitoring task, cell-specific eICIC statisticfor CRE area, or UE-specific eICIC statistic for CRE area. The PPPoE Monitoring task isavailable only on BTS3202Es and BTS3203Es. Cell-specific eICIC statistic for CRE area andUE-specific eICIC statistic for CRE area are available only on BTS3205Es.A carrier aggregation (CA) UE is able to access multiple cells simultaneously and report themonitoring results of each cell at the same time. However, if a CA UE whose secondary servingcell (SCell) is not configured or not activated, monitoring results in the SCell will not be reported.If a monitoring item does not involve the CA feature, actual monitoring result of the monitoringitem is reported.



11

3.3.2 Precautions for Monitoring on BTS3202Es and BTS3203EsTake the following precautions for monitoring on BTS3202Es and BTS3203Es:l The values of Cabinet No., Subrack No., and Slot No. must be 0.l The value range of Local Cell ID is 0~255.l BTS3202Es and BTS3203Es do not support the following monitoring tasks:

UL CoMP (Cell) Monitoring CPRI BER Monitoring TDD Interference Detection Monitoring Multi-User BF (Cell) Monitoring Cell-Level eICIC Statistic for CRE Area UL CoMP (User) Monitoring Multi-User BF (User) Monitoring SFN User Detection UE-Level eICIC Statistic for CRE Area DTF Test AAS Frequency Scanning Intermodulation Interference Detection Monitoring

l BTS3202Es support the following monitoring tasks: FFT Frequency Scan

l BTS3202Es do not support PPP Performance monitoring and MP Performance monitoringin the Transport Port Flux Stat Monitoring task.

l BTS3202Es do not support the CA Property monitoring item in the following monitoringtasks: BLER Monitoring Power Headroom Monitoring Quality of Channel Monitoring Scheduling Monitoring Throughput Monitoring UL Power Control Monitoring DL Power Control Monitoring ICIC (User) Monitoring MCS Count Monitoring

The monitoring results of this monitoring item in these monitoring tasks are Non CA.l In Transport Port Flux Stat Monitoring and Transport Link Flux Stat Monitoring tasks,

Subboard Type must be BASE_BOARD.

3.3.3 Precautions for Monitoring on BTS3205EsTake the following precautions for monitoring on BTS3205Es:



12

l The values of Cabinet No., Subrack No., and Slot No. must be 0.l The value of Local Cell ID must be 0.l BTS3205Es do not support the following monitoring tasks:

Cell-Level UL CoMP Monitoring Multi-User MIMO Monitoring CPRI BER Monitoring ICIC(Cell)Monitoring TDD Interference Detection Monitoring Multi-User BF (Cell) Monitoring UL CoMP (User) Monitoring Multi-User BF (User) Monitoring ICIC(User)Monitoring SFN User Detection Cell Combination Monitoring RRU/RFU Output Power Monitoring DTF Test AAS Frequency Scanning Intermodulation Interference Detection Monitoring Transport OAM Monitoring

l BTS3205Es do not support PPP Performance monitoring and MP Performance monitoringin the Transport Port Flux Stat Monitoring task.

l In Transport Port Flux Stat Monitoring and Transport Link Flux Stat Monitoring tasks,Subboard Type must be BASE_BOARD.

3.3.4 General Parameter Input DescriptionUEIDs are used to trace UE-level performance tests. UEIDs can be set to S-Temporary MobileSubscriber Identity (STMSI), Random Value, and Trace Reference No.The following describes how to obtain and use the three types of UEIDs:l STMSI and Random Value

The ue-Identity IE in the RRC Connection Request message contains the MMEc and m-TMSI fields. Therefore, you can obtain the MMEc and m-TMSI in hexadecimal formatfrom the ue-Identity IE. Enter the MMEc and m-TMSI in decimal format on the traceinterface.The RRC Connection Request message may carry a Random Value in hexadecimal format.Enter the Random Value in hexadecimal format on the trace interface.The STMSI in decimal format and Random Value in hexadecimal format can also bequeried by running DSP ALLUEBASICINFO.



13

NOTE

If the EPC does not support IMSI-based single UE tracing on the entire network, use the STMSI andRandom Value to collect data for single UE tracing and monitoring.A maximum of 30 NEs of the same version can be selected when creating the tracing and monitoring tasksbased on the STMSI and Random Value. If the specified UE can be successfully handed over amongmultiple selected NEs over the X2 interface, the UE data can be continuously collected in the tracing andmonitoring task.If the eNodeB is not a selected NE for this tracing task, the U2000 cannot continue collecting data, evenwhen the UE is handed over to the original eNodeB.Due to the timing sequence problem, however, some data may fail to be recorded when the UE is handedover to the target NE.

l Trace Reference No.For details about the Trace Reference No., see Trace ID in 3GPP TS 32.422. The valuerange is 0~16777215 (3 bytes).Use a Trace Reference No. in the following conditions:The EPC of a vendor must support single UE tracing on the entire network based on theIMSI (complying with 3GPP TS 32.422), and the tracing task has been initiated.For example, the EPC of Huawei has initiated LTE/EPC End-to-End User Trace.The Trace Reference No. on the LTE side can be obtained from:For the Huawei EPC, obtain the TraceID that is automatically displayed on the interfacewhen LTE/EPC End-to-End User Trace is created.Obtain the Trace Reference No. from the Trace Activation IE from the S1 interfacemessages (INITIAL CONTEXT SETUP REQUEST, HANDOVER REQUEST, TRACESTART) and the X2 interface message (HANDOVER REQUEST).Click displayed at the end of the User Trace ID of each tracing and monitoring task, theU2000 will provide the existing Trace Reference No. on the live network.

NOTE

The U2000 lists the Trace Reference No. of the first 200 tracing tasks in the recent two days.If the EPC supports IMSI-based single UE tracing on the entire network, use the Trace Reference No. tocollect data for single UE tracing and monitoring.A maximum of 30 NEs can be selected when creating the tracing and monitoring tasks based on the TraceReference No. The UE data can be continuously collected as long as the UE is served by the selected NEs.If the eNodeB is not a selected NE for this tracing task, the U2000 cannot continue collecting data. However,the U2000 can collect the data again when the UE is handed over to the original eNodeB.



14

4 Cell Performance Monitoring4.1 UL CoMP (Cell) Monitoring4.1.1 Usage Scenario

This task is used to monitor the number of cell-level UEs using uplink (UL) coordinated multi-point (CoMP). This counter measures the UL CoMP Users Num of Scenario 1, UL CoMPUsers Num of Scenario 2, and UL CoMP Users Num of mixed Scenario. This monitoringitem is used to initially determine the usage of the UL CoMP function in a cell.

4.1.2 Service ImpactNone.

4.1.3 ParametersTable 4-1 Parameters for UL CoMP (Cell) monitoring

Parameter DescriptionLocal Cell ID Local cell ID of the cell performing cell-level

UL CoMP monitoring.Monitor Period (ms) Interval of reporting monitoring results. It can

be set to 1000, 2000.

eNodeBPerformance Monitoring Reference 4 Cell Performance Monitoring


15

4.1.4 Monitoring ResultsTable 4-2 Results of UL CoMP (Cell) monitoring

Parameter Unit ValueRange

Description Formula

UL CoMP UsersNum ofScenario 1

Number 0 to 1000 The eNodeB reports thenumber of UEs using the ULCoMP in scenario 1 to theU2000 at the end of eachmonitoring period.UL CoMP Users ofScenario 1: UEs located atthe cell edge using the ULCoMP function.

N/A

UL CoMP UsersNum ofScenario 2

Number 0 to 1000 The eNodeB reports thenumber of UEs using the ULCoMP in scenario 2 to theU2000 at the end of eachmonitoring period.UL CoMP Users ofScenario 2: UEs that areinterfered by UEs using theULCoMP of scenario 1 in acollaborative neighboringcell use the UL CoMPfunction.

N/A

UL CoMP UsersNum of mixedScenario

Number 0 to 1000 The eNodeB reports thenumber of UEs using the ULCoMP in mixed scenario tothe U2000 at the end of eachmonitoring period.UL CoMP Users of mixedScenario: UEs using the ULCoMP of both scenario1 andscenario 2 during amonitoring period.

N/A

4.2 Satisfaction of Service Monitoring4.2.1 Usage Scenario

This task is used to monitor the QoS satisfaction rate of VoIP services with QoS class identifier(QCI) 1. This task is also used to monitor the QoS satisfaction rates of GBR services with QCIs



16

2 to 4 in a cell based on the throughput. The QoS satisfaction rates of GBR services indicatewhether the QoS requirements of admitted GBR services are met and can be used to determinethe cell load status.


4.2.3 ParametersTable 4-3 Parameters for satisfaction of service monitoring

Parameter DescriptionTest Items It can be set to DL QCI1 Satisfaction rate of

Service, DL QCI2 Satisfaction rate ofService, DL QCI3 Satisfaction rate ofService, DL QCI4 Satisfaction rate ofService, UL QCI1 Satisfaction rate ofService, UL QCI2 Satisfaction rate ofService, UL QCI3 Satisfaction rate ofService, UL QCI4 Satisfaction rate ofService, Congestion State, or a combinationof some items.

Local Cell ID ID of the cell on which satisfaction of servicemonitoring is performed.

CN Operator ID In a RAN sharing scenario, a cell can beshared by a maximum of six operators. In anon-RAN sharing scenario, a cell can be usedby only one operator.

Monitor Period (ms) Interval of reporting monitoring results. It canbe set to 50, 100, 200, 500, 1000, or 2000.

4.2.4 Monitoring ResultsTable 4-4 Results of satisfaction of service monitoring

Parameter Unit Value Range Description FormulaCN Operator ID N/A 0 to 5 ID of the operator for which

satisfaction of servicemonitoring is performed.

N/A



17

Parameter Unit Value Range Description FormulaCN OperatorUL QCI[n]Satisfaction rateof Service

% 0 to 100 Average QoS satisfaction ratesof different uplink services in acell when monitoring resultsare reported. n ranges from 1 to4.On the uplink, the uplinkQoS satisfaction rate of QCI1is represented by the averageuplink VoIP servicesatisfaction rate in a cell, thatis, the ratio of the total uplinkVoIP service satisfaction ratesto the total number of VoIPservices in a cell. The higherthe proportion, the higher thesatisfaction rate.The uplink QoS satisfactionrates of GBR services withQCIs 2 to 4 are evaluated foreach logical channel group.The QoS satisfaction rate of alogical channel group isevaluated based on thetransmitted data and the totalamount of data to betransmitted. The higher thetransmitted data volume, thehigher the QoS satisfactionrate.

N/A



18

Parameter Unit Value Range Description FormulaCN OperatorDL QCI[n]Satisfaction rateof Service

% 0 to 100 Average QoS satisfaction ratesof different downlink servicesin a cell when monitoringresults are reported. The valuerange of n is 1 to 4. On thedownlink, the downlink QoSsatisfaction rate of QCI1 isrepresented by the averagedownlink VoIP servicesatisfaction rate in a cell, thatis, the ratio of the totaldownlink VoIP servicesatisfaction rates to the totalnumber of VoIP services in acell. The higher the proportion,the higher the satisfaction rate.The downlink QoS satisfactionrates of GBR services withQCIs 2 to 4 are evaluated basedon the ratio of the scheduleddata volume of these servicesto the total data volume to betransmitted for these services.If the scheduled data volume ishigh or the data volume in thebuffer is low, the QoSsatisfaction rate is high.

N/A

CongestionState

N/A Congestion,Uncongestion

Current congestion state of anoperator when monitoringresults are reported.

N/A

4.3 General Throughput Monitoring

4.3.1 Usage ScenarioThis task is used to monitor uplink and downlink throughput information about all UEs in a cellin real time. Based on this information, the data transmission status of the eNodeB or UEs canbe determined.




19

4.3.3 ParametersTable 4-5 Parameters for general throughput monitoring

Parameter DescriptionLocal Cell ID ID of the cell on which general throughput

monitoring is performed.Test Items It can be set to RLC Throughput, RLC

Throughput of GBR service, RLCThroughput of NON-GBR service, or acombination of some items.

CN Operator ID In a RAN sharing scenario, a cell can beshared by a maximum of six operators. In anon-RAN sharing scenario, a cell can be usedby only one operator.

Monitor Period (ms) Interval of reporting monitoring results. It canbe set to 50, 100, 200, 500, 1000, or 2000.

Save File The Save File check box is selected bydefault, and monitoring results areautomatically saved in the default path. Thefile name, file format, and save path can beset.NOTE

This parameter is available only on the LMT.

4.3.4 Monitoring Resultsl RLC Throughput

Table 4-6 Results of RLC ThroughputmonitoringParameter Unit Value Range Description FormulaCN Operator ID N/A 0 to 5 ID of the

operator forwhich generalthroughputmonitoring isperformed.

N/A



20

Parameter Unit Value Range Description FormulaCell UplinkRLCThroughput

bps 0 to 300000000 Uplinkthroughput of acell. Only RLCpayloads areincluded. TheRLC headers,retransmitteddata, and statereports areexcluded.

(General uplinkRLC throughput(byte) x 8) x1000/MonitorPeriod (ms)

Cell DownlinkRLCThroughput

bps 0 to 300000000 Downlinkthroughput of acell. Only theRLC payloadsare included.The RLCheaders,retransmitteddata, and statereports areexcluded.

(Generaldownlink RLCthroughput(byte) x 8) x1000/MonitorPeriod (ms)

CN OperatorCell UplinkRLCThroughput

bps 0 to 300000000 Uplink RLCthroughput of anoperator of acell. Only RLCpayloads areincluded. TheRLC headers,retransmitteddata, and statereports areexcluded.

(Uplink RLCthroughput of anoperator of a cell(byte) x 8) x1000/MonitorPeriod (ms)

CN OperatorCell DownlinkRLCThroughput

bps 0 to 300000000 Downlink RLCthroughput of anoperator of acell. Only RLCpayloads areincluded. TheRLC headers,retransmitteddata, and statereports areexcluded.

(Downlink RLCthroughput of anoperator of a cell(byte) x 8) x1000/MonitorPeriod (ms)



21

l RLC Throughput of GBR service

Table 4-7 Results of RLC Throughputof GBR service monitoringParameter Unit Value Range Description FormulaCN Operator ID N/A 0 to 5 ID of the

operator forwhich generalthroughputmonitoring isperformed.

N/A

Cell GBRTraffic UplinkRLCThroughput

bps 0 to 300000000 Uplinkthroughput ofGBR services ina cell. Only RLCpayloads areincluded. TheRLC headers,retransmitteddata, and statereports areexcluded.

(General RLCthroughput ofuplink GBRservices (Byte)x 8) x 1000/Monitor Period(ms)

Cell GBRTrafficDownlink RLCThroughput

bps 0 to 300000000 Downlinkthroughput ofGBR services ina cell. Only RLCpayloads areincluded. TheRLC headers,retransmitteddata, and statereports areexcluded.

(General RLCthroughput ofdownlink GBRservices (Byte)x 8) x 1000/Monitor Period(ms)

CN OperatorCell GBRTraffic UplinkRLCThroughput

bps 0 to 300000000 Uplink GBRservicethroughput of anoperator of acell. Only RLCpayloads areincluded. TheRLC headers,retransmitteddata, and statereports areexcluded.

(Uplink GBRservicethroughput of anoperator of a cell(byte) x 8) x1000/MonitorPeriod (ms)

eNodeBPerformance Monitoring Reference 4 Cell Performance Monit

ENodeB Performance Monitoring Reference(Draft D)(PDF)-En

Documents

Transcript of ENodeB Performance Monitoring Reference(Draft D)(PDF)-En