ENOC Approved Vendor and Subcontractor List
-
Upload
sajith-krishnan -
Category
Documents
-
view
2.000 -
download
137
description
Transcript of ENOC Approved Vendor and Subcontractor List
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 1 of 19
HORIZON JEBEL ALI TERMINALS LIMITED (HJTL)
DUBAI, U.A.E.
PROJECT FALCON: BULK LIQUID TERMINAL IN JAFZA & JETFUEL
PIPELINE TO DIA
TENDER DOCUMENTS FOR
ENGINEERING, PROCUREMENT AND CONSTRUCTION OF PHASE 1
DOC. NO.: P/HJTL/078/2011
SECTION F
ANNEXURES
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 2 of 19
HORIZON JEBEL ALI TERMINALS LIMITED (HJTL)
DUBAI, U.A.E.
PROJECT FALCON: BULK LIQUID TERMINAL IN JAFZA & JETFUEL PIPELINE TO DIA
TENDER DOCUMENTS FOR
ENGINEERING, PROCUREMENT AND CONSTRUCTION OF PHASE 1
SECTION F, ANNEXURES
ANNEXURE VI: APPROVED VENDOR & SUB CONTRACTOR LIST
Notes:
1. All materials shall be of North American, Japanese, Europe only, except for
deviations mentioned in the list below. For Carbon steel plates & pipes South
Korea, South Africa and Saudi Arabian origin may also be considered.
2. In case of deviations, if any to the below list, shall be highlighted in the tender
offer for Employer’s evaluation.
3. If the item is not listed below,, the Contractor shall obtain prior approval for any
Vendor from Employer’s Representative
4. Contractor shall follow the approved vendor list for procurement and supply of
material to the extent possible. Supply, acceptance and installation of any
alternative Product / Vendor shall be subject to prior approval of the Employer
/ Employer’s Representative (Refer Note:5).
5. Tenderer may propose alternate Vendors along with the bid for consideration.
Alternate proposals shall be from reputed Manufacturers/experienced Vendors
in the field/material considered, for minimum of last ten years. Tenderer will be
required to submit all necessary documentary evidence/credentials as
required by the Employer for pre-qualification / verification leading to approval
of Vendor. Tenderer may also be required to arrange for inspection of the
proposed Vendor’s facility by Employer / Employer’s Representative, if
required.
Bids received with no deviation stipulated for the above list will be considered
as acceptance of the approved vendor and sub-contractor list and no
deviation will be permitted after award of contract.
A. List of Approved Vendors :Mechanical & Piping Works :
Item
No. Description Manufacturer Country of Origin
1 Air Compressor Atlas Copco Sweden
Kaeser USA
Ingersoll Rand USA
2 Ball Valves
Borsig Germany
Crane UK / USA
Grinnel / Hindle UK / USA
J.C. Fluid Flow FZE UAE
Kitz Japan
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 3 of 19
Item
No. Description Manufacturer Country of Origin
ECON Netherlands
Klinger USA
Neles Jamesburg UK
OMB Italy
Orbit Valves UK
Walworth USA
Tyco Italy
SWI Korea
Virgo Italy
Sern France
3 Butterfly Valves (Triple
eccentric metal seated
Zero leakage)
Crane USA/UK
KSB Italy
Orbit USA
Vanessa Italy
Tomoe Japan
Orion Europe
Tyco Italy
Virgo Italy
Wallworth USA
4 Check Valves Crane UK / USA
Flowcheck UK
Goodwin UK
Grinnel / Hindle UK / USA
Hattersley Heaton UK
J.C. Fluid Flow FZE UAE
Walworth USA
KITZ Japan
KTM Japan
Lazaro Ituarte Spain
Muller Canada / USA
Orion Italy
Stockham Triangle U.K.
Valvosider Italy
Velan Canada
TYCO Italy
5 Control Valves Brooks Valves UK
Fisher Emerson USA /Europe
Smith Valves Germany
Tyco Italy
Flowserve Italy / USA
6 Double Block & Bleed Valve
/ Twin Seal Valve
General/Orbit USA
Tyco Italy
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 4 of 19
Item
No. Description Manufacturer Country of Origin
7 Fire-Protection Equipment Angus UK
Chemguard USA
Saval NETHERLANDS
SKUM Sweden
8 Flame Arrestors Protego Germany
Groth USA
Whessoe Varec Italy
Sand & Jurs USA
9 Flanges Akahagi Flange Japan
Bebitiz Germany
FAD Flange Italy
Geldbech Germany
Loire Industrie France
Melesi Italy
Metalfar Italy
MGI France
Nicola Galperti &
Figlio Italy
Seo Koatsu Japan
Shimoda Iron Works Japan
The Rokude Japan
Ulma Forja Spain
Wilhelm Geldbech Germany
10 Flexible Fuel Piping Nupigec Italy
OPW USA
UPP UK
11 Fuel Dispensing Unit – Gas
Oil
Gilbarco Veeder
Root USA
Wayne Pumps USA
12
Gate Valves
Crane UK / USA
Grove Italy
Hattersley Heaton UK
J.C. Fluid Flow FZE UAE
KITZ Japan
ECON Netherlands
KTM Japan
Lazaro Ituarte Spain
Malbranque France
Orion Italy
Walworth USA
Valvosider Italy
Velan Canada
Tyco Italy
Virgo Italy
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 5 of 19
Item
No. Description Manufacturer Country of Origin
13 GRE Tanks, Pipes & Fittings
(Underground)
Gulf Eternit UAE
Amiantit Saudi Arabia
14 Hammer Blind
Fetterolf USA
Sammi Korea
Strahman Vlaves Inc USA
15 Level gauge-Mechanical
(Float Type)
Schand & Jurs USA
Krohne Germany
Mobrey Emerson USA
Whessoe Varec Italy
Klinger Austria
16 Oil Water Separator –
Coalescer Plate type
Brentwood Industries USA
Facet International USA
Hydrasep Inc USA
Klargester UK
Hydro-Flo
Technologies USA
Kingspan
Environmental UK
Pacific Marine USA
Pan America
Environmental USA
K-pack Netherlands
17 Paint Ameron
Hempels
International Paints
Jotun
Leighs Paints
Sigma
18
Pig Launcher Quick Closures
/ Pig Alert / Insulating joints
Pipeline Engg &
Supply Co UK
Perry Equipment
Corpn
Forain S.R.L Italy
Oil States Industries
Inc USA
T.D. Williamsons USA
19 Pipe (Carbon Steel)
Avesta Sheffield Sweden
Bentler Germany
Bergrohr Germany
British Steel Corpn UK
Dalmine SPA Italy
DMV France
Hyundai - Hysco Korea
Eisembau Kramer Germany
Europipe Germany
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 6 of 19
Item
No. Description Manufacturer Country of Origin
General Sider Italiana Italy
Kwasaki Japan
Mannesmann Germany, Brazil
Nippon Steel Japan
NKK Corp Japan
Osaks Tokushu Japan
Pietra Italy
Siderca Argentina
Sumitomo Metals Japan
Tamsa Mexico
US Steel USA
Vallourec
International / Starval France
Wemarenberg Germany
Zeljezara Sisak Croatia
Arabian Pipes Saudi Arabia
Tubos Italy
Seah Korea
Husteel Korea
20 Pipe (Stainless Steel) Avesta Sandwik Sweden
Bentham
International UK
British Steel Corpn UK
Butting Germany
Dalmine Italy
Mannesmann Germany
Marubeni Itoctru Steel Japan
Nippon Steel Japan
NKK Corp Japan
RGB/Eurotube UK
Sterling Tube UK
Sumitomo Metals Japan
Vallourec
International France
Posco Korea
Tubacex Spain
21 Pipe Fittings
Awaji Sangyo K.K. Japan
Benkan Corp. Japan
BKL U.K.
BSL France
Chero France
Coprosider Italy
Delcore / Deltinox France
ERNE Austria
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 7 of 19
Item
No. Description Manufacturer Country of Origin
Gam Raccordi Italy
Geldbach Germany
IRC Italy
Interfit France
Metalfar Italy
Korea Flange Korea
Ladish USA
Ulma Spain
OMR Italy
Reccordi Forgiatti Italy
Sumikin Kikoh Co. Ltd Japan
Technoforge Italy
Tecnobend Italy
Tectubi Italy
Thyssen Stahlunion Germany
Toyo Fitting Co. Ltd Japan
Vallourec / Interfit France
Vanleeuwen NETHERLANDS
JD France
22
Plates (Carbon Steel) Arcelormills Europe
Charleroi Belgium
Corus UK
Posco Korea
Illyich Ukraine
Dongkuk Korea
Alchevsk Steel Mill Ukraine
Ruukki Finland
Mittal Steel S. Africa, Romania
Dillinger Hutte Germany
GTS France
HIGHVELD South Africa
ISCOR South Africa
Kwasaki Corporation Japan
Nippon Steel Japan
23 Pressure reducing Valve-Fire
Service (to be UL listed)
CLA-VAL USA
OCV Control Valves USA
Tyco USA
Emerson USA
Viking Corp USA
Watts ACV USA
24 Pumps- Centrifugal Type
Product Pumps
Flowserve France
Gorman Rupp USA
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 8 of 19
Item
No. Description Manufacturer Country of Origin
KSB France
Allweiller Germany
Ebara Australia
Goulds - ITT USA
Leistritz Germany
Sterling-SIHI Germany
Sulzer David Brown International
Clyde Union Pumps USA /U.K
United Pumps USA
25 Pumps- PD Screw Pumps Albany Pumps Germany
Bornemann Germany
Flowserve France
Gorman Rupp USA
Leistritz Germany
Plenty UK
Allweiller Germany
IMO USA
Warren Pumps USA
Houttuin Netherlands
26 Pumps- Drain Sump & Other
Utility Pumps Patterson USA
Flowserve France
Blackmer USA
Gorman Rupp USA
Goulds - ITT USA
Grundfos USA
Clyde Union Pumps USA /U.K.
27 Pumps- Submersible (for
U/G Mogas/Gas Oil Tanks)
Gilbarco Veeder
Root
USA
F E Petro USA
28 Fire Pumps AURORA USA
PATTERSON USA
29 Relief Valves
Tyco Italy
Dresser UK
Weir Valves UK /USA
Broady UK
Bailey Birkett U.K.
30 Strainers Muller Canada / USA
Orion Italy
Spirax Sarco UK
Pacific UK
PBV USA
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 9 of 19
Item
No. Description Manufacturer Country of Origin
Plenty UK
Velan Canada
Barton Firtop U.K.
Eaton Germany
Fabrotech USA
31 Tank Calibration SGS
ITS Calibrett
32 Tank Roof - Aluminum
Geodesic Dome
Conservatek USA
HMT USA
Vacono Germany
Temcor CTS USA
Ultraflote USA
33 Tank Roof/ Internal
Aluminum Floater
Conservatek USA
HMT USA
Baillie Australia
Vacono Germany
Ultraflote USA
34 Third Party Inspection &
Certification Agency
ABS
Bureau Veritas
Germanischer Lloyd
Lloyds Register
TUV
35 Truck loading arms
EMCO Germany
FMC France
Liquip Germany
Oilco USA
OPW USA
36 Marine Loading Arms FMC TECHNOLOGIES FRANCE
WOODFIELD U.K
KANON Loading
Equipment NETHERLANDS
37 Truck Loading Drop Ladder
for access to truck top/ Fall
protection system
EMCO Germany
FMC France
Liquip International Germany
Oilco USA
Kanon NETHERLANDS
OPW USA
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 10 of 19
B. List of Approved Vendors for Electrical & Instrumentation :
Itm No. Description Manufacturer Country of
Origin
1
Power Cables/Control
Cables/Earthing Cables
ABB Sweden
BICC/Ducab UK/Dubai
Draka UK
Nexans France
Kerpen Cables Germany
Prysmian Italy
Riyad Cables Saudi Arabia
2 Pressure/Temperature/
Flow Transmitters
ABB Belgium
Emerson Rosemount USA
Foxboro USA
Honeywell USA
Yokogawa Japan
3 Cable Glands BICC UK
Crouse Hinds UK
CMP UK
Hawke UK
4 Cable Support System Swift UK
Vantrunk UK
Abahsain Cope Saudi Arabia
Tolmega France
Gersan Turkey
Wibe Sweden
5 Medium Voltage
Switchgear, Transformers,
Low Voltage Switchgear
ABB Italy/ Finland
Cutler Hammer Germany
Powell USA
Areva France
Merlin Gerin (Schneider) Germany
Emirates Transformers UAE
Siemens Germany
Larsen and Toubro India
6 Diesel Power Generator Caterpillar USA
Cummins UK
7 Induction Motors
(690Volts)
ABB Finland
Siemens/Loher Germany
Vacon Finland
WEG Brazil
VEM Germany
8 Induction Motors
(415Volts)
ABB Finland
Siemens Germany
Westinghouse USA
Weg Brazil
VEM Germany
9
Variable Frequency
Drives
ABB Finland
Siemens Germany
Vacon Finland
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 11 of 19
Itm No. Description Manufacturer Country of
Origin
Schneider Electric France
10 Pressure Gauges Budenberg USA
Wika USA
Bourdon Sedeme France
Weksler USA
Tel-Tru USA
Baumer France
11 Instrumentation Cables
Draka UK
Belden UK
Nexan’s France
Delta Crompton UK
BICC/Ducab UAE
Kerpen Cables Germany
12 Level and Flow Switches Magnetrol USA
E&H Germany
EMERSON USA
13 Radar Tank Gauging
System
SAAB Rosemount Sweden
Honeywell ENRAF USA
14 Ultrasonic Level
Transmitter
Magnetrol USA
E&H Germany
Vega Germany
15 Gas Detection System Draeger USA/Canada
Honeywell - Sieger USA
Siemens Switzerland
16 Lighting Fixtures and
Small Power Equipment/
Push Button Stations/ ESD
Push Button Stations
CEAG UK
Legrand / Appleton France
Philips Netherlands
Stahl Germany
Thorn Sonpak UK
17 Junction Boxes CEAG UK
Stahl Germany
Rose UK
Weildmuller Germany
18 Explosion Proof
Distribution Boards
Bartec Germany
Stahl Germany
CEAG UK
Feam UK
Rose UK
Cooper Crouse Hinds UK
19 Earthing Materials Furse UK
Wallis UK
20 Communication Cables,
Multi-drop Mob-bus loop
cables
Belden UK
21 Relays Omron/Idec Japan
Telemechanique/Allen
Bradley
USA
22 CCTV Honeywell USA
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 12 of 19
Itm No. Description Manufacturer Country of
Origin
System and Camera
Johnson Control UK
Hernis Norway
Pelco UK
Siemens Germany
Sony Japan
Tyco UK
Bosh Germany
23 Access Control System Honeywell USA
Siemens Germany
Johnson Control UK
Tyco UK
24 Turbine Flow Meter Emerson (Daniel) USA
Smith ( FMC) Germany
25 Batch Controller Emerson
(Danload/Petrocount)
USA
Smith (Accuload) UK
26 Digital Set Stop Valve Emerson (Daniel) USA
Smith (FMC) Germany
27 Truck Overfill/ Earthing
system
Earth-Rite UK
Scully UK
28 Computers and Monitors EH USA
Dell USA
Hewlett Packard (HP) USA
29 Central Control System
(SCADA / PLC)
ABB Sweden
CSI UK
Emerson USA
Yokogawa Japan
Honeywell USA
Invensys UK
Schneider France
Siemens Germany
30 Electric Actuators Rotork USA
BIFFI ITALY
31 Leak Detection System ATMOSI INT’L UK/SINGAPORE
EFA TECHNOLOGIES USA
CASON ENG Hungary
TELVENT ENERGIA Europe
KROHNE Germany
TYCO / TRACETEK-
International
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 13 of 19
C. List of Approved Vendors for Domestic Water Supply System :
Item
No. Description Make BSI Reference
1 uPVC HP Class E Pipes + all
accessories
Hepworth - UK BS 3505- 1986
G+ F - UK, BS 4346 -1969
KEYTERAIN - UK
2 Preinsulated copper pipes
including all brass
accessories.
Inter, BS 2871 Part 1
Everhot, BS 864 Part 2.
Arison glass lined -
Italy
3 Water heater glass lined 80
& 100 litres horizontal +
vertical type
Arison CEI–Std latest
amended
BS 853-1981 + BS 5500 -
1982
4 Gate valve bronze Crane, BS 1400 SCB6
Peggler
5 GRP - Hot pressed panel
tank
Gulf Eternite BS 3396 +
BS 3749 latest
amended Solico
FBI
6 Pressurized Booster pump
set.
Grundfos
SMC
DPL - NETHERLANDS
D. List of Approved Vendors for Drainage Installation :
Item
No. Description Make BSI Reference
1 Underground uPVC pipes and
fittings / polyprolyvan
Hepworth,
Terrain,
Marley
BS 4660, 5481 (1989)
2 uPVC pipes and fittings 32 & 40
mm & 50 “p” trap etc. /
vitreous clay pipes fittings
Hepworth,
Terrain,
Marley
BS 3943
BS 5254
BS 5255
3 uPVC pipes and fittings 82, 110,
160 and gully traps, rain pipe
adaptor etc.
Hepworth,
Terrain,
Marley
BS 4514 -1983
4 Sanitary ware Twyford - UK
Ideal Standard
RAK Ceramic - UAE
BS 3402–1969
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 14 of 19
5 Drainage sump pump with
stainless steel body and
impeller 1.5 Litres discharge at
20.0 Mts head
Grundfos,
SMC - UK,
DPL -
NETHERLANDS,
Wire - Germany
6 Dl manhole covers and frames
( To approvals )
DI street gully covers
( To approvals )
Stanton - UK,
Elington - UK,
RSI - India,
Ducast - UAE
BS 497 Part-1
E. List of Approved Vendors for Air Conditioning System :
1. Window A/C : “O “General, Carrier, National, York
2 Split Unit A/C’s : York, Trane, Carrier
3. Copper pipes : Muller Brass
4. MS pipes & Fittings : Nippon – Japan
5. Piping insulations : Armaflex / Insulux
6. Duct work : GI Sheeting as per specification to approvals
7. Duct insulations : Atlas (USA), KIMCO
8. All Valves : Crane UK, Peggler - UK
9. Thermo-stats : Honeywell, Climaterial
10. Coating on Canvas : Foster – USA
11. CANVAS : 6 Oz. Indoor and 8 Oz Outdoor
12. Industrial Extract Fans : Green heck, Nuaire, Woods/approved
equivalent
13. Wall mounted propeller fans: Xpelair, Ventaxia, Vortice/approved
equivalent
Notes:
All external refrigeration pipes shall have overall coating with Aluminium
sheets of min 2.0 mm thick with hammer tome finish, after providing the foam
insulation on pipes with canvas cloth and foster coating.
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 15 of 19
F. List of Approved Vendors for Fire Alarm & Fire Protection System :
Sr. Description Make BS Ref. Remarks
1 Fire alarm System Cerebrus – UK
Gent - UK
Simplex - UK
Synchro – UK
Thorn - UK
Eurocal - UK
Photain- UK
TYCO - France
AFAMinerva– UK
Honeywell - USA
2 Smoke Detectors /
Heat Detectors/Fire
Alarm bell/ Break
Glass
Eurocal,
Photain,
GENT,
TYCO,
AFA Minerva - UK
5750 Part 2
1987, 3402-
1969, 4662 +
5839 Part 2
3 Co2 extinguishers –
5 Kgs.,
hose reel
Angus – UK,
Walter,
Unitor UAE,
NFPA
(UL/FM
approved)
4 Dry powder
extinguishers – 5
Kgs. Hose reel
Angus – UK,
Walter,
Unitor UAE
Unitor helios,
Angus,
NFPA
(UL/FM
approved)
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 16 of 19
G. List of Approved Makes for Electrical Installation (Building MEP Works) :
Sr. Description Make Cat # BS Ref. Remarks
1 HD PVC rigid
conduits
And accessories
EGA Tube
Marhsall Tuflex – UK
or equivalent
4607
and
6099
2 Rigid GI Conduits
and accessories
Barton – UK
3 Rigid GI Trunking
and accessories
Davies – UK
Vantruck - UK
4 GI switch boxes MK / Delta /Crabtree –
UK
4662
5 Switches MK / Delta / Crabtree
UK
Metallic
Plate Cover
(out door)
3676
For indoor
plastic cover
switches
6 Switches – Ex proof Stahl / O-Z Gedney
7 13 Amps. Switch
sockets outlets
MK / Delta / Crabtree-
UK
1363/A
For indoor
Plastic cover
switches
8 15 Amp switches
sockets outlets
MK / Delta / Crabtree -
UK
Metallic Plate
Cover (out
door)
546-1950
For indoor
plastic cover
switches
9 20 Amps DP switches
with neon indication
MK / Delta / Crabtree-
UK
Metallic plate
cover
( out door )
3676-
part
For indoor
plastic cover
switches
10 Flex outlets 20 A with
fuse
MK / Delta / Crabtree-
UK
Metallic plate
cover
(out door )
For indoor
plastic cover
switches
11 Cooker connection
units 45 Amps.
MK / Delta / Crabtree -
UK
Metallic plate
cover
(out door )
5733-
1979
For indoor
plastic cover
switches
12 45 Amps DP
switched for cooker
With neon indication
MK / Delta / Crabtree-
UK
Metallic plate
cover
(out door)
3676-
part-1
1987
For indoor
plastic cover
switches
13 Telephone outlet MK / Delta / Crabtree -
UK
Metallic plate
cover
(out door )
For indoor
plastic cover
Switches
14 TV coaxial cable
outlet
MK / Delta / Crabtree -
UK
WHI plastic
cover
For indoor
plastic cover
switches
15 Single core PVC Cu
wires
BICC– UK / DUCAB UAE 6004 IEC
502
16 XLPE / SWA PVC Cu
Cable
BICC – UK / DUCAB –
DUBAI / Delta / Pirelli
UK
5467 +
6346
(pvc)
17 MCB - DBs ABB – Sweden /
MERLIN GERIN France /
Mitsubishi /
GDS Sharjah
5486
Part
12+13
IEC 439
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 17 of 19
Sr. Description Make Cat # BS Ref. Remarks
18 (LBS) Isolator in w/p
IP 55 Enclosure
MERLIN GERIN,
France / ABB - Sweden
5419 IEC
408
19 Brass cable gland
with E - tags
BICC UK
CMP UK
20 Earthing Material Furse UK,
BICC UK
Wallis UK
21 Exhaust fan – central
exhaust fan
Xpelair – France,
Ventaxia,
Vortice,
Elicent
22 Emergency Lights Merchant Adventure,
Menveir – UK
Pescara
5499
Part -1
+ 3, 2560
23 Light Fittings Saudi Lighting FITZ,
Gerald Philips / Lite
Tech, Dubai
24 Light Fittings – Ex
proof
Stahl / O-Z Gedney /
CEAG
25 Cable Trays and
accessories (Building
MEP)
BICC,
GEC,
Tolmega - France
Wibe – Sweden
Swift – UK
Vantruck – UK
Gersan ,Turkey
Oglaend, Norway
Mita-U.K.
Cope- KSA
NOTES
MDBs, SMDBs, sub DBs shall be assembled with components from one manufacturer.
The panel boards SMDBs, sub DBs shall also be either assembled by the principals of
the manufacturer at abroad or by the authorized local agent’s workshop. All shop
tests shall be carried out by the manufacturer at free of cost, as requested by the
Engineer, includes all necessary test certificates of laboratories. An inspection at
assembled shop shall be arranged by the contractor for final approval of the main
panels, sub DBs prior to delivery to site.
APPROVED MAKES FOR ELECTRICAL ITEMS
The Approved Makes for materials are included in particular specification are
preferred to maintain the standards for all materials, but tenderer shall price his offer
to the similar materials to the standards those are specified. Contractor to submit
material list / samples etc. to the Engineer’s approval which is final.
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 18 of 19
H. List of Approved Vendors for Miscellaneous Items :
Item No. Description Make
1 Paints JOTUN, National Paints, International Paints. Sigma,
Leigh Paints
2 False Ceiling AMF
3 False Flooring Unicorn
4 Water Treatment
Plant
Water Bird – UAE,
Facet – U.K.,
K.Pack -Netherlands
I. Approved Sub Contractors :
i. Building Works
1. Khansaheb Civil Engineering
2. Six Construct
3. Al Futtaim Carillion
4. Convergent Value Engineering LLC
5. Ranya General Construction Co. LLC
6. Engineering Contracting Co LLC
7. System Construct LLC
ii. Civil Works
1. Sands Contracting
2. Khansaheb Civil Engineering
3. Six Construct
4. Al Futtaim Carillion
5. ITC Contracting LLC
6. Arcade Star
iii. Storage Tanks (API 650)
1. Belleli Energy , UAE
2. CB&I, UAE
iv. Vessels
1. Belleli Energy , UAE
2. GMMOS
3. MIS
4. Deustche Bobcock
5. Adyard Abudhabi
------------------------------------------------------------------------------------------------------------------------------------------------------
Page 19 of 19
v. Electrical & Instrumentation
1. Kentech International Ltd.
2. Kharafi National
3. Control & Applications Emirates
4. Danway LLC
5. Consilium
6. Honeywell
7. ABB
8. Larsen & Toubro Ltd
9. Audex Pte Ltd
10. Toledo Electrical & Mechanical Works
11. Schneider / Cimac
vi. Mechanical & Piping
1. Maritime Ind. Services (MIS)
2. NICO / Topaz Engineering
3. Contracting and Trading (CAT)
4. Albanna Engineering
5. Descon Engineering
6. Petron Emirates Mfg & Contracting
7. Tata Projects