[Eng]WirelessLAN Win8

download [Eng]WirelessLAN Win8

of 7

Transcript of [Eng]WirelessLAN Win8

  • 7/29/2019 [Eng]WirelessLAN Win8

    1/7

    How to use Wireless LAN(Windows 8)

    I. Proxy Settings 1~ 4II. Network Settings 5~15III. Daily Use 16,17IV. Delete Network Setting 18,19

    . Proxy Settings (Internet Explorer 10)

    INDEX

    1

    2

    3

    If you open from the Start screen tiles,

    click the wrench-icon on the bottom ofthe screen, and click display on thedesktop.

    1

    (1) Run Internet Explorer.

    (2) Click the icon of a gear.(3) Click Internet options.

    (1) Select Connections tab.(2) Check Never dial a connection.(3) Click LAN settings.

    (1) Uncheck Automatically detectsettings and Use automaticconfiguration script.

    (2) Check Use a proxy server for yourLAN.

    (3) Click Advanced.

    Caution!

    Uncheck this box when you useoff-campus network.If you forget, you cannot useinternet off-campus (e.g. at home).

    Alumni (graduates) will not be able to connect to the intra-university networks.

  • 7/29/2019 [Eng]WirelessLAN Win8

    2/7

    . Proxy Settings (Internet Explorer 10)

    4

    Caution1 When you use wireless LAN other than Waseda and Toyama campus, see IT

    Center web site to check proxy.http://www.waseda.jp/navi/e/network/proxy.htmlDisable proxy when you use off-campus network. If you forget, you cannotuse internet at home. See 3-(2).

    . Network Settings

    5(1) Click Start and open Control

    Panel.(2) Click View network status and

    tasks.

    6(1) Click Manage

    wireless networks.

    (1) Input the following information.(2) Click OK and close Internet Option.

    2

    Proxy address to usewww-proxy.waseda.jp

    Do not use proxy server for

    addresses beginning with

    *.waseda.ac.jpDelete other settings like local.

    Port

    8080

    Check here.

    1

    View byCategory

  • 7/29/2019 [Eng]WirelessLAN Win8

    3/7

    .Network Settings

    7

    8(1) Input the following information.(2) Click Next.(3) Select Change connection settings.

    3

    (1)Select Manually create anetwork profile.

    (2)Click Next.

    Network name

    waseda-wpa2Security type

    WPA2-Enterprise

    Encryption type

    AESCheck these two.

  • 7/29/2019 [Eng]WirelessLAN Win8

    4/7

    . Network Settings

    10

    11

    9

    4

    (1) Check Connect automaticallywhen this network is in rangeand Connect even if thenetwork is not broadcasting itsname (SSID).

    (1) Click Security tab.(2) Confirm a network authentication

    method.(3) Click Settings.

    Choose a network authentication method

    Microsoft Protected EAPPEAPUncheck this box

    Uncheck all.

    Check here.(Uncheck Connect to theseservers.)

    Uncheck all.

    Uncheckhere.

    (1) Configureaccording to theright window. Dontforget configurationof EAP MSCHAPv2.

    (2) Click OK and returnto waseda-wpa2Wireless networkproperties.

  • 7/29/2019 [Eng]WirelessLAN Win8

    5/7

    . Network Settings

    13(1) Click a network icon in task tray.(2) Select waseda-wpa2 and connect.

    12(1) Click Advanced settings.(2) Configure according to the

    right in 802.1x settingstab.

    (3) Click OK in Advancedsettings.

    (4) Click OK in waseda-wpa2

    Wireless networkproperties.(5) Close Manually connect

    to a wireless network.

    5

    Checkhere.

    Userauthentication

    If you cannot find the icon, the icon is stored in

    . (Click .)Or, check your wireless switch is on.

  • 7/29/2019 [Eng]WirelessLAN Win8

    6/7

    . Network Settings

    14(1) Enter your Waseda-net ID

    and password.(2) Click OK. If you fail, try again.

    15

    Notice

    First time Windows Security Alertappears. Click connect.

    When a connection established,Connected" to the right of the "waseda-wpa2 appears, and the gray icon with a*" mark turns into white.

    . Daily Use

    16(1) Go to the place where access point is set.

    You can check the location on IT service NAVI site.http://www.waseda.jp/navi/e/network/wireless_new.html

    17(1) Turn the wireless switch on.

    (2) Connect to network. Follow 13~15 of this manual.(3) Enable proxy. Follow 1~3 of this manual.

    6

    User name

    Waseda-net ID(Waseda-net mail

    address)Password

    Password of Waseda-net portal

  • 7/29/2019 [Eng]WirelessLAN Win8

    7/7

    7

    . Delete Network Setting

    18

    Describes how to delete the wireless LAN network settings from your PC.

    (1) Click a network icon in task tray.(2) Right click "waseda-wpa2 on the

    list.

    19

    (1) Click Forget this network.

    The Settings of waseda-wpa2" will be removed.

    How to use Wireless LAN (Windows 8)

    IT Center, Waseda University June 5, 2013 Ver. 2