ENGRAVING MATERIALS, SUPPLIES AND SERVICES. 800.383 - able-engravers… · able engravers, inc....
Transcript of ENGRAVING MATERIALS, SUPPLIES AND SERVICES. 800.383 - able-engravers… · able engravers, inc....
ABLE ENGRAVERS, INC. PRODUCT CATALOG
800.383.5185ENGRAVING MATERIALS, SUPPLIES AND SERVICES.
ABLE SERIES SHEET PLASTIC
ROWMARK SHEET PLASTIC
BADGES, FRAMES & FINDINGS
METALS
TAPES & ADHESIVES
ENGRAVING CUTTERS
CUSTOM FABRICATION
JRS FRAMES & HOLDERS
p4
p20
p42
p57
p65
p69
p38
p76
CONSIDER IT DONE.
1w w w . A b l e-E n g r a v e r s . c o m
TABLE OF CONTENTSABLE ENGRAVING MATERIALS & SUPPLIES
Suggested Material Selection Guide
ABLE SERIES PLASTICS Know Your PlasticsLaserablesAwardMark PremierAwardMarkAll Weather Premier Satins & Mattes All Weather GlossLight BlockersOutdoor Metallic TexturesTexturesA.D.A. Appliqué & SubstrateLaser .004MetallicsAll Weather Premier Metals Microsurfaces & Woodgrains Interior SatinsPrint ReceptivesInk Receptives
Rowmark PlasticsMattesSatinsUltraGrave MattesUltraGrave SatinsUltra-Mattes FrontUltra-Mattes ReverseLaserMaxTexturesFlexiBrass & FlexiColorLaserMarkReverse LaserMarkLaserGlowMetalGraph PlusADA AlternativeLaserLIGHTSLASERmagLacquersSlickersNoMark Metals PlusSafe-T-MarkAdditional Rowmark Products
CUSTOM FABRICATIONFabrication CapabilitiesPrinting & Hot StampingFabrication Equipment
BADGES & ACCESSORIESMetal Name BadgesHow to Engrave Metal Badges
2-3
4-1945
6-77899
10-1111
12-13131414151617
18-19
20-37202122232425
26-272829303132323334343535363637
38-4138-39
4041
43-564445
Military Name BadgesReady Made Badge FramesImage Maker Badge FramesImage Maker Picture FramesImage Maker Clear LensesIdentifier Badge FramesGripper Tag MagnetsBadge FindingsAdhesives & Accessories
METALSAluminumAlumaJetDuraBlackAlumaMarkBrassNickel SilverLaser Marking SpraySteelDie Cut Circles
TAPES & ADHESIVES Seklema Table MatFat MatAble Super Stick Thin Disks Able Foam DisksAble Engraving Table Tape Felt Disks3M Tapes and Adhesives Velcro TapeAble Magnetic TapeAble Heat TapeAble Double-Sided Tapes
ENGRAVING CUTTERSHalf Round CuttersQuarter Round CuttersBurnishersParallel CuttersProfile CuttersADA Braille Dot CuttersDiamond GraversBevel CuttersEZ Rider Burnishing Attachment
SUBLIMATIONName Badge Blanks2” CirclesDye Sub PaperFRP Sheet Stock
JRS FRAMES & HOLDERS
46474849
50-515253
54-5556
57-6458-59
606061626363
63-6464
65-686666666666666768686868
69-73707172727273737373
74-7575757575
76-112
ABLE ENGRAVERS, INC.
9521 N. Kedvale Ave. Skokie, IL 60076800.383.5185
©2014 Able Engravers, Inc. All descriptions, terms, policies and/or prices are subject to change without notice. All rights reserved.
2 8 0 0 . 3 8 3 . 5 1 8 5
SUGGESTED MATERIAL SELECTION GUIDE
What will the final application of the product be?
Tactile Braille ADA Compliant SignageAble ADA Appliqué p13 Rowmark ADA Alternative Appliqué p33
Able ADA Substrate p13Rowmark ADA Alternative Substrate p33
Able Light Blocker Reverse p9 Rowmark Ultra-Matte Reverse p25
Signage, Identification or for Curved SurfacesAble AwardMark Premier p7 Bur-Lane AwardMark p7Rowmark Flexibrass & Flexicolor p29
Able Laser004 p13 Rowmark Laserlights p35
Award Plates, Plaques or Trophy Tags
Signage, Identification or Badges for Flat SurfacesAble Laserables p5 Rowmark Lasermax p26 Rowmark Lasermark p30
•Suitable for Outdoor or Indoor Use•Suitable for Indoor Use Only
Able Light Blocker p9 Rowmark Reverse LaserMark p31
Able Laser004 p13 Rowmark Laserlights p34
Able AwardMark Premier p7 Able AwardMark p7Rowmark Flexibrass & Flexicolor p29
Able Textures p11 Rowmark Textures p28
Able Ink Receptive p19
Able All Weather Premier Satins p8 Able All Weather Premier Mattes p8
Able Laserables p5 Rowmark Lasermax p26 Rowmark Lasermark p30
Able AwardMark Premier p7 Able AwardMark p7Rowmark Flexibrass & Flexicolor p29
Able All Weather Premier Satins p8 Able All Weather Premier Mattes p8
Able Ink Receptive p19 Rowmark Metalgraph Plus p32
Direct Surface Printing Able Ink Receptive p19
Able ADA p13 Rowmark ADA Alternative p33
Rowmark Laserglow p32Rowmark Metalgraph Plus p32Rowmark Lasermag p34
LASER ENGRAVING What engraving method will be used?
w w w . A b l e-E n g r a v e r s . c o m
3
SUGGESTED MATERIAL SELECTION GUIDE
Able ADA Appliqué p13 Rowmark ADA Alternative Appliqué p33
Tactile Braille ADA Compliant Signage Able ADA Substrate p13 Able Light Blocker Reverse p9 Rowmark ADA Alternative Substrate p33 Rowmark Ultra-Matte Reverse p25
Signage, Identification or for Curved SurfacesAble AwardMark Premier p7 Able AwardMark p7Rowmark Flexibrass & Flexicolor p29
Able Laser004 p13 Rowmark Laserlights p34
Award Plates, Plaques or Trophy Tags
Signage, Identification or Badges for Flat SurfacesAble Laserables p5 Rowmark Lasermax p26 Rowmark Lasermark p30
Able Light Blocker p9 Rowmark Ultra-Mattes Reverse p25 Rowmark Reverse LaserMark p31 Rowmark Slickers p35
Able Laser004 p13 Rowmark Laserlights p34
Able Textures p11 Rowmark Textures p28
Able AwardMark Premier p7 Able AwardMark p7Rowmark Flexibrass & Flexicolor p29
Able All Weather Premier Satins p8 Able All Weather Premier Mattes p8 Able All Weather Gloss p9Able Microsurfaces p15Able Interior Satins p16 Rowmark Ultra-Mattes Front p24 Rowmark Mattes p20Rowmark Satins p21Rowmark Lacquers p35
Able ADA p13 Rowmark ADA Alternative p33
Able Laserables p5 Rowmark Lasermax p26 Rowmark Lasermark p30
Able AwardMark Premier p7 Able AwardMark p7Rowmark Flexibrass & Flexicolor p29
Able All Weather Premier Satins p8 Able All Weather Premier Mattes p8 Rowmark Mattes p20
Able Metallics p14 Rowmark Metalgraph Plus p32 Rowmark NoMark Metals Plus p36
Able Print Receptive p17 Able Ink Receptive p19
Able Ink Receptives p19
Direct Surface Printing Able Print Receptives p17
Able Metallics p14 Rowmark Metalgraph Plus p32 Rowmark NoMark Metals Plus p36
Able Print Receptive p17 Able Ink Receptive p19
Rowmark Laserglow p32
Rowmark Safe-T-Mark p36
What will the final application of the product be?
ROTARY ENGRAVINGWhat engraving method will be used?
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
4
A GUIDE TO Able SERIES PLASTICS
NEW!
NEW!
NEW!NEW!
NEW!
NEW!
KNOW YOUR ABLE PLASTICS
Our standard laserable product constructed of an acrylic core with thin foil cap designed for detailed engraving. Laserables are available in a range of colors, finishes and gauges to suite the needs of today’s laser engraver and can be rotary engraved as well. With the exception of the metallic finishes, Able Laserables are UV sable and suitable for both indoor and outdoor applications.
Building on the success of our hugely popular AwardMark line, AwardMark Premier is an .020” thick, acrylic core material perfect for curved surface applications or high-end awards. AwardMark Premier adds a deep brushed finish which serves to greatly reduce fingerprint visibility. AwardMark Premier comes with adhesive pre-applied for your convenience.
Our original .020” flexible material design specifically with the awards industry in mind. It’s flexible acrylic core and thin foil cap works with both lasers and rotary machines and it’s ability to allow for highly detailed engraving makes it a perfect choice for awards, trophies, indoor signage and specialized curved-surface applications.
All Weather Premier Satins and Mattes are extremely versatile indoor/outdoor materials available with either a matter or a classic satin finish. constructed of an acrylic core with a micro-polymer cap that is ultra-durable, UV stable and .003” thin allowing for detailed engraving. The versatility of the this new product allows you to stock one satin and one matte product for all your needs. Suitable for laser and rotary engraving.
Light Blockers are designed exclusively for reverse engraving and are suitable for indoor or outdoor applications. These materials combine a matte or gloss finish on top of a vibrant color foil and exclusive Light Blocker coating. This special coating allows you to color fill or backlight with no worries of paint or light showing through except in the engraved area. Suitable for laser and rotary engraving.
Outdoor Metallic Textures combine brilliant metallic colors with a classic textured finish and Bur-Lane’s micro-polymer cap to create a product that’s UV stable, outdoor weatherable, extremely durable and allows for detailed engraving. With a 10 year UV stability rating, Outdoor Metallic Textures are perfect for high traffic outdoor environments such as zoos, golf courses, botanical gardens or parks. Suitable for laser and rotary engraving.
ABLE LASERABLES
ABLE AWARDMARK PREMIER
ABLE AWARDMARK
ABLE ALL WEATHER PREMIER MATTES & SATINS
NEW!
All Weather Premier Metals combine a brushed metal finish with a durable micro-polymer cap. This protective cap allows for outstanding protection from outdoor elements and the acrylic core provides complete laser compatibility. All Weather Premier Metals are perfect for exterior signage applications as well as indoor signage, personal identification and awards.
ABLE ALL WEATHER PREMIER METALS
ABLE LIGHT BLOCKERS
NEW!
The textured surface and micro-polymer cap on our Textures allows for detailed engraving from a laser or rotary engraver. Durable and resistant to fingerprints, Textures work well for industrial environments and high traffic areas. Able Textures are outdoor weatherable and UV stable.
ABLE TEXTURES
ABLE OUTDOOR METALLIC TEXTURES
Our .004" thick, adhesive backed, laserable engraving material is perfect for bar-codes, cylindrical labeling, ID plates or trophy plates. Sold in 12” x 24” sheets in convenient packages of 10.
ABLE LASER .004
Able A.D.A. materials provide the substrate (core) and appliqué (cap) layers separately allowing the engraver to create raised letter signage capable of complying with all ADA raised-letter regulations. Suitable for indoor or outdoor applications and laser or rotary engraving.
ABLE A.D.A.
ABLE ALL WEATHER GLOSS
Able Metallics have the appearance of metal but at a reduced weight. Constructed with an ABS core and metallic foil cap for rotary engraving, Metallics are perfect for indoor metallic signage and badges. Most Able Metallics are clear-coated for increased scratch resistance.
The original Able All Weather material in a glossy finish is UV stable and outdoor weatherable, making them prefect for difficult application.
ABLE METALLICS
The Able Micro series is our most popular material for rotary engraving. Combining a matte finish with a micro-thin surface color, these materials require minimum cutting depth and allow detail engraving. Available in all of the most popular color combinations as well as woodgrain finishes.
ABLE MICROSURFACES & WOODGRAINS
The original rotary engraving plastic updated to meet the needs of today’s engraver. The .003 polymer cap on our Interior Satins provides a durable brushed finish that allows for fine detailed engraving. Interior Satins are an excellent choice for interior signage and personal identification.
ABLE INTERIOR SATINS
Able Series Print Receptives are designed to meet the needs of the fast growing market of digital printing with an engravable plastic sheet product designed to go straight from your thermal ribbon printer to your rotary engraver.
ABLE PRINT RECEPTIVES
Able Series Ink Receptives are designed to meet the needs of the fast growing market of digital printing with an engravable plastic sheet product that is also ink receptive without the need for additional agents or surface treatments. Available in acrylic or ABS cores, Ink Receptives allow for direct printing via Inkjet, Flatbed Digital Print UV & UV/LED or Solvent-Based Inkjet printers and engraving with your laser or rotary engraver creating a truly versatile material perfect for this rapidly growing market segment.
ABLE INK RECEPTIVES
Laser or Rotary EngravableRotary Engravable Only
ICON KEY CAN BE LASER ENGRAVED
CAN BE ROTARY ENGRAVED
MATERIAL IS UV STABLE
SUITABLE FOR OUTDOOR USE
SUITABLE FOR INDOOR USE FRONT ENGRAVABLE
REVERSE ENGRAVABLE
MADE IN U.S.A.REDUCED FINGERPRINT VISIBILITY
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
5
INTERIOR & EXTERIOR SIGNAGE
• All Able Laserable metallics are clear coated for scratch resistance. Metallics are not UV stable
SURFACE CORE 1/32”
COLOR
1/16”
2 PLY
1/8” 1/16”
3 PLYABLE Laserables
COLOR 2 PLY
BlackNavy BlueRedPine GreenCharcoal Gold Fleck
GoldGoldGoldGoldGold
SURFACE COREBU962-601BU962-602BU962-603BU962-604BU962-623
.050”
Able Laserables Gold Series
BU912-901
BU982-750BU982-751
BU982-754BU982-755
BU982-901
WhiteWhiteWhiteWhiteWhiteBlackWhiteBlueBlackWhiteWhiteBlackRedWhiteWhiteWhiteWhiteWhiteWhiteWhiteWhiteWhiteBlackBlackBlackBlackBlackBlackBlackBlackBlack
BU962-726BU962-736BU962-739BU962-740BU962-749BU962-750BU962-751BU962-752BU962-753BU962-754BU962-755BU962-756BU962-757BU962-758BU962-759BU962-760BU962-762BU962-763BU962-766BU962-770BU962-800BU962-801BU962-900BU962-901BU962-902BU962-903BU962-904BU962-906BU962-907BU962-933BU962-938
BU963-754
Dark BrownMedium BrownGreyBright GreenOrangeWhiteRedWhiteYellowBlackBlueAlmondWhiteForest GreenMaroonSapphire BlueNavy BluePurpleCeladon GreenLight BlueAmerican WalnutLight WalnutEuropean GoldBrushed Aluminum MatteBrushed BrassRadiant GoldSmooth GoldBrushed CopperBrushed Aluminum GlossBrushed SilverSmooth Silver
ABLE SERIES LASERABLES
BU962-726Dark Brown/White
BU962-736Medium Brown/White
BU962-739Grey/White
BU962-740Bright Green/White
BU962-749Orange/White
BU962-750White/Black
BU962-751Red/White
BU962-752White/Blue
BU962-753Yellow/Black
BU962-754Black/White
BU962-755Blue/White
BU962-756Almond/Black
BU962-760Sapphire Blue/White
BU962-762Navy Blue/White
BU962-763Purple/White
BU962-757White/Red
BU962-758Forest Green/White
BU962-759Maroon/White
BU962-766Celadon/White
BU962-601Black/Gold
BU962-602Navy/Gold
BU962-603Red/Gold
BU962-604Pine Green/Gold
BU962-623Char Gold Fleck/Gold
BU962-770Light Blue/White
BU962-800Amer Walnut/White
BU962-801Light Walnut/White
BU962-900♦●Euro Gold/Black
• Indoor• Outdoor• Scores• Saws• Drills• Laser Vector Cuts• Bevels
• Heat Bendable• Screen Prints• Hot Stamps• Bonds• UV Stable• Shearing NOT
recommended
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced Impact Acrylic
Matte, Brushed, Gloss, Pattern
1/32”, 1/16”, 1/8”
Laser or Rotary Carbide
.003” (.08mm)
24 1/4 x 49”
CHARACTERISTICS:Material Specifications:
BU962-901♦●Brushed Aluminum/Black (Matte CC)
BU962-902♦●Brushed Brass/Black
BU960-903♦●Radiant Gold/Black
BU962-904♦●Smooth Gold/Black
BU962-906♦Brushed Copper/Black
BU960-907♦●Brushed Aluminum/Black (Gloss CC)
BU962-933♦●Brushed Silver/Black
BU962-938♦●Smooth Silver/Black
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
6
NEW AwardMark Premier >>PREFLEX633Brushed Gold / Black
*When compared to Traditional AwardMark line.
The All New AwardMark Premier Series with its new, enhanced brushfinish provides a more realistic brushed-metal appearance and virtuallyeliminates visible fingerprints on the finished product.*<< Traditional AwardMark
BUFLEX01Brushed Gold / Black
showing fingerprint
INTERIOR SIGNAGE , IDENTIFICATION & UPSCALE AWARDSABLE SERIES AWARDMARK PREMIER NEW!
NOTICEABLY LESS VISIBLE FINGERPRINTS*
Put your laser to work for you. Engrave and cut all your trophy plates at once on yourlaser. Your league trophies will be ready in minutes... not hours!
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
BUFLEX01Brush Gold/Black
BUFLEX04Brush Copper/Black
BUFLEX05Brush Alum/Black
BUFLEX06Gloss Black/Gold
BUFLEX07Matte Black/Gold
BUFLEX08Mirror Gold/Black
BUFLEX09Mirror Silver/Black
BUFLEX10Matte White/Black
BUFLEX15Glossy Gold/Black
BUFLEX16Matte Red/White
BUFLEX17Matte Blue/White
INTERIOR & EXTERIOR SIGNAGE, AWARDS
SURFACE CORE
COLOR
.020”
2 PLY - w/ Adh2 PLYAble AwardMark
BlackBlackBlackGoldGoldBlackBlackBlackBlackWhiteWhiteWhite
BUFLEX01BUFLEX04BUFLEX05BUFLEX06BUFLEX07BUFLEX08BUFLEX09BUFLEX10BUFLEX15BUFLEX16BUFLEX17BUFLEX18
.020”BUFLEX01ABUFLEX04ABUFLEX05ABUFLEX06ABUFLEX07ABUFLEX08ABUFLEX09ABUFLEX10ABUFLEX15ABUFLEX16ABUFLEX17ABUFLEX18A
Brushed GoldBrushed CopperBrushed AluminumGloss BlackMatte BlackMirror GoldMirror SilverMatte WhiteGloss GoldMatte RedMatte BlueMatte Black
ABLE SERIES AWARDMARK
PREFLEX625FABrushed Champ/Black
INTERIOR & EXTERIOR SIGNAGE, UPSCALE AWARDS
NEW!
SURFACE CORE
COLOR
.020”
2 PLY - w/ AdhesiveAble AwardMark Premier
Obscures Fingerprint Visibility!
BlackBlackBlackBlackWhiteGoldWhiteGoldBlackBlackBlackGold
PREFLEX625FAPREFLEX626FAPREFLEX627FAPREFLEX628FAPREFLEX629FAPREFLEX630FAPREFLEX631FAPREFLEX632FAPREFLEX633FAPREFLEX634FAPREFLEX637FAPREFLEX640FA
Brushed ChampagneBrushed BronzeBrushed CopperBrushed PewterBrushed BlueBrushed BlueBrushed RedBrushed RedBrushed GoldBrushed AluminumBrushed SilverBrushed Black
ABLE SERIES AWARDMARK PREMIER
BUFLEX18Matte Black/White
PREFLEX626FABrushed Bronze/Black
PREFLEX627FABrushed Copper/Black
PREFLEX628FABrushed Pewter/Black
PREFLEX629FABrushed Blue/White
PREFLEX630FABrushed Blue/Gold
PREFLEX631FABrushed Red/White
PREFLEX632FABrushed Red/Gold
PREFLEX633FABrushed Gold/Black
PREFLEX634FABrushed Alum/Black
PREFLEX637FABrushed Silver/Black
PREFLEX640FABrushed Black/Gold
7
• Indoor• Scores• Saws• Drills• Shears• Bevels
• Laser Vector Cuts• Screen Prints• Hot Stamps• Laser Kiss Cuts
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced Impact Acrylic
Matte, Brushed, Gloss
.020”
Laser, Rotary, Burnish
.003” (.08mm)
24 3/16 x 49”
CHARACTERISTICS:Material Specifications:
• Indoor• Scores• Saws• Drills• Shears• Bevels
• Laser Vector Cuts• Screen Prints• Hot Stamps• Laser Kiss Cuts
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced Impact Acrylic
Brushed
.020”
Laser, Rotary Carbide
.003”
24 3/16 x 49”
CHARACTERISTICS:Material Specifications:
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
• Indoor• Outdoor• Bevels• Saws• Drills• Scores• Bonds
• UV Stable & Outdoor Weatherable• Laser Vector Cuts• Screen Prints• Hot Stamps• Heat Bendable• Permits Detailed Engraving
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
.003 Polymer Capped Impact Acrylic
Matte Non-Glare
1/16”, 1/8“
Laser or Rotary Carbide
.005”
24 1/4 x 49”
CHARACTERISTICS: Material Specifications:
• Indoor• Outdoor• Bevels• Saws• Drills• Scores• Bonds
• UV Stable & Outdoor Weatherable• Laser Vector Cuts• Screen Prints• Hot Stamps• Heat Bendable• Permits Detailed Engraving
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
.003 Polymer Capped Impact Acrylic
Brushed
1/16” (1/8“ available - call for details)
Laser or Rotary Carbide
.005”
24 1/4 x 49”
CHARACTERISTICS: Material Specifications:
8
NEW!
INTERIOR & EXTERIOR SIGNAGE, PERSONAL IDENTIFICATION
SURFACE CORE
COLOR
1/16”
2 PLYAble All Weather Premier Satins
BlackRedBlueWhiteWhiteBlackWhiteWhiteWhiteWhiteWhiteWhiteGold
BU962-700BU962-701BU962-702BU962-704BU962-705BU962-706BU962-707BU962-708BU962-715BU962-718BU962-728BU962-732BU962-737
True WhiteTrue WhiteTrue WhiteBlackBlueYellowRedPine GreenBright GreenOrangeNavyDark BrownBlack
ABLE SERIES ALL WEATHER PREMIER SATINS
NEW!
INTERIOR & EXTERIOR SIGNAGE, PERSONAL IDENTIFICATIONABLE SERIES ALL WEATHER PREMIER MATTES
BU962-700True White/Black
BU962-701True White/Red
BU962-702True White/Blue
BU962-704Black/White
BU962-705Blue/White
BU962-706Yellow/Black
BU962-707Red/White
BU962-708Pine Green/White
BU962-715Bright Green/White
BU962-718Orange/White
BU962-728Navy/White
BU962-732Dark Brown/White
BU962-737Black/Gold
SURFACE CORE
COLOR
1/16”
2 PLYAble All Weather Premier Mattes
WhiteBlackWhiteWhiteBlackWhiteWhiteWhiteWhiteWhiteRedBlueGoldSilverGold
BU062-510BU062-511BU062-512BU062-513BU062-516BU062-518BU062-520BU062-522BU062-524BU062-529BU062-530BU062-531BU062-534BU062-535BU062-536
1/8”BU082-510BU082-511BU082-512BU082-513
BU082-529
BlackTrue WhiteRedBlueYellowBright GreenBlueberryTealSapphireDark BrownTrue WhiteTrue WhiteBlackBlackTrue White
BU062-510Black/White
BU062-511True White/Black
BU062-512Red/White
BU062-513Blue/White
BU062-516Yellow/Black
BU062-518Bright Green/White
BU062-520Blueberry/White
BU062-522Teal/White
BU062-524Sapphire/White
BU062-529Dark Brown/White
BU062-530True White/Red
BU062-531True White/Blue
BU062-534Black/Gold
BU062-535Black/Silver
BU062-536True White/Gold
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
BU721-000Matte/Matte
SURFACE CORE
COLOR 2 PLY Able Light Blocker Mattes
MatteBrushed AluminumParchmentSmooth SilverBlackYellowWhiteRedSmooth Gold*Pine GreenGreyNavy BlueAzure BlueDark BrownSapphireBurgundyChina BlueBlueberry
MatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatte
1/32”BU711-000
BU711-152
1/16”BU721-000BU721-100BU721-017BU721-079BU721-094BU721-122BU721-152BU721-158BU721-159*BU721-178BU721-179BU721-182BU721-257BU721-258BU721-342BU721-346BU721-376BU721-481
1/8”BU741-000BU741-100
BU741-079BU741-094
BU741-152
BU741-257BU741-258
BU721-100Matte/Brushed Alum
BU721-017Matte/Parchment
BU721-079Matte/Smooth Silver
BU721-094Matte/Black
BU721-122Matte/Yellow
BU721-152Matte/White
BU721-158Matte/Red
BU721-159*Matte/Smooth Gold
BU721-178Matte/Pine Green
BU721-179Matte/Grey
BU721-182Matte/Navy Blue
BU721-257Matte/Azure Blue
BU721-258Matte/Dark Brown
BU721-342Matte/Sapphire
BU721-346Matte/Burgundy
BU722-000Gloss/Clear
BU722-094Gloss/Black
BU722-152Gloss/White
BU722-158Gloss/Red
BU721-376Matte/China Blue
BU721-481Matte/Blueberry
SURFACE CORE
COLOR 2 PLY Able Light Blocker Gloss
ClearBlackWhiteRed
GlossGlossGlossGloss
1/16”BU722-000BU722-094BU722-152BU722-158
9
INTERIOR & EXTERIOR SIGNAGEABLE SERIES ALL WEATHER GLOSS
• Outdoor• Indoor• Saws• Drills• Bonds• UV Stable** BU721-159 Not UV Stable
• Heat Bendable• Screen Prints• Hot Stamps• Laser Vector Cuts• Permits Detail Engraving
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced Impact Acrylic for Reverse Engraving
Matte Non-Glare, Gloss
1/32”, 1/16“, 1/8”
Laser, Rotary
.003” (.03mm)
24 1/4 x 49”
CHARACTERISTICS:Material Specifications:
• Outdoor• Indoor• Saws• Drills• Bevels
• Heat Bendable• Screen Prints• Hot Stamps• Bonds
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Laminated Impact Acrylic
Gloss
1/16“, 1/8”
Rotary
.012” (.3mm)
24” x 48 3/4”
CHARACTERISTICS:Material Specifications:
INTERIOR & EXTERIOR SIGNAGEABLE SERIES LIGHT BLOCKERS
* BU721-159 Not UV Stable
BU462-500Black/White
SURFACE CORE
COLOR
1/16”
2 PLYAble All Weather Gloss
WhiteBlackWhiteWhiteRed
BU462-500BU462-501BU462-502BU462-503BU462-504
BlackWhiteRedBlueWhite
BU462-501White/Black
BU462-503Blue/White
BU462-504White/Red
BU462-502Red/White
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
INTERIOR & EXTERIOR SIGNAGE, IDENTIFICATIONABLE SERIES METALLIC LASER TEXTURES
10
BU862-790 Copper / Black
BU862-791 Gold / Black
BU862-792 Chrome / Black
BU862-792 Chrome / Black
NEW!
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
NEW!
BU862-750True White/Black
BU862-753Yellow/Black
BU862-754Black/White
BU862-755Blue/White
Outdoor Metallic Textures feature a 10 year UV stability rating!
SURFACE CORE
COLOR
.060”
2 PLY
BlackBlackWhiteWhite
BU862-750BU862-753BU862-754BU862-755
True WhiteYellowBlackBlue
BU862-791Gold/Black
BU862-790Copper/Black
BU862-792Chrome/Black
Able Laser Textures
11
NEW!
INTERIOR & EXTERIOR SIGNAGE, IDENTIFICATIONABLE SERIES METALLIC LASER TEXTURES
• Indoor• Outdoor• Bevels• Saws• Drills• Shears• Bonds
• UV Stable & Outdoor Weatherable• Laser Vector Cuts• Screen Prints• Hot Stamps• Heat Bendable• Permits Detailed Engraving• Obscures Fingerprint Visibility
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
.003 Capped Impact Acrylic
Textured
.060”
Laser or Rotary Carbide
.005”
24 1/4 x 49”
CHARACTERISTICS:Material Specifications:
• Indoor• Outdoor• Bevels• Saws• Drills• Shears• Bonds
• UV Stable & Outdoor Weatherable• Laser Vector Cuts• Screen Prints• Hot Stamps• Heat Bendable• Permits Detailed Engraving• Obscures Fingerprint Visibility
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
.003 Capped Impact Acrylic
Textured
.060”
Laser or Rotary Carbide
.005”
24 1/4 x 49”
CHARACTERISTICS:Material Specifications:
INTERIOR & EXTERIOR SIGNAGE, IDENTIFICATION
INTERIOR & EXTERIOR SIGNAGE, IDENTIFICATIONABLE SERIES LASER TEXTURES
SURFACE CORE
COLOR
.060”
2 PLY
Able Outdoor Metallic Laser Textures
BlackBlackBlack
BU862-790BU862-791BU862-792
CopperGoldChrome
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
12
ABLE SERIES A.D.A.
Many options are available when it comes to the design of your ADA signage. Create extra depth and appealby combining substrate and appliqué materials for different looks. The examples below use both traditional single-ply ADA materials as well as our Light Blocker 2-ply reverse material to createadded color depth and a more high-end look and feel.
Dress up your A.D.A. signsDress up your A.D.A. signs
A.D.A. COMPLIANT INTERIOR & EXTERIOR SIGNAGE
Light Blocker ADA SignBU721-178 Matte / Pine Green Substrate (p9)BU711-152 Matte / White Appliqué (p9)Shown with Raster Braille Beads
Traditional ADA Sign w/ Raster Braille BeadsBU662-803 Dark Brown Substrate (p13)BU612-201 White Appliqué (p13)
Hybrid ADA Sign w/ Raster Braille BeadsBU662-401 Black Substrate (p13)BU711-152 Matte/White Light Blocker Appliqué (p9)
Light Blocker ADA Sign w/ Raster Braille BeadsBU721-152 Matte/White Substrate (p9)BU711-094 Matte/Black Appliqué (p9)
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
BU662-201White
BU662-204Bright White
BU662-307Charcoal Grey
BU662-401Black
BU662-501Blue
BU662-601Red
BU662-602Burgundy
BU662-803Dark Brown
INTERIOR & EXTERIOR SIGNAGE
SURFACE 1/32”
COLOR
1/16”
1 PLYAble ADA Appliqué & Substrate
BU612-201BU612-204BU612-307BU612-401BU612-501BU612-601BU612-602BU612-803
BU662-204BU662-307BU662-401BU662-501BU662-601BU662-602BU662-803
1/8”
BU682-204BU682-307BU682-401BU682-501BU682-601BU682-602BU682-803
White*Bright White*CharcoalBlack*BlueRedBurgundyDark Brown
ABLE SERIES A.D.A.
13
BU004WBQTrue White/Black
INTERIOR SIGNAGE & INDUSTRIAL LABELING
NEW!
SURFACE CORE
COLOR
FINISH
2 PLY - w/ AdhAble Laser .004
BlackWhiteGoldSilverBlackBlackBlackBlack
MatteGlossGlossGlossGlossBrushedBrushedBrushed
.004”BU004WBQBU004BWQBU004BGLDQBU004BSILQBU004GGQBU004BGQBU004BSQBU004COQ
True WhiteGloss BlackGloss BlackGloss BlackGloss GoldBrushed GoldBrushed AluminumBrushed Copper
ABLE SERIES LASER .004
BU004BWQGloss Black/White
BU004BGLDQGloss Black/Gold
BU004BSILQGloss Black/Silver
BU004GGQGloss Gold/Black
BU004BGQBrushed Gold/Black
BU004BSQBrushed Alum/Black
BU004COQBrushed Copper/Black
* All Laser .004 products are sold pre-packaged in packs of 10 quarter sheets.
• Indoor• Scores• Saws• Drills• Bevels• Bonds
• Laser Vector Cuts• Heat Bendable• Screen Prints• Hot Stamps• Braille Engravable
Material
Finish
Thickness
Engraving Methods
Std. Sheet Size
Single-Ply Modified Acrylic
Matte Non-Glare
1/32”, 1/16“, 1/8”
Laser or Rotary
24” x 48 3/4”
CHARACTERISTICS:Material Specifications:
• Indoor• Scores• Saws• Drills• Shears
• Laser Vector Cuts• Screen Prints• Hot Stamps• Laser Kiss Cuts
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
MIcrosurfaced, Pre-Adhesived Plastic
Gloss, Matte, Brushed
.004”
Laser
.002“
12” x 24” - 10 Sheets per pack
CHARACTERISTICS:Material Specifications:
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
14
ABLE SERIES METALLICS
• Indoor• Scores• Saws• Drills• Shears• Bevels
• Heat Bendable• Screen Prints• Hot Stamps• Bonds• Permits Detailed Engraving
Material
Finish
Clear Coat
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced ABS
Brushed, Smooth
Gloss, Matte, None
1/32”, 1/16“, 1/8“
Rotary
.003” (.08mm)
24 1/4 x 49”
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
CHARACTERISTICS: Material Specifications:
CHARACTERISTICS: Material Specifications:
INTERIOR SIGNAGE & PERSONAL IDENTIFICATION
BU362-910Brush Brass/Black
BU362-930Euro Gold/Black
BU362-931Brush Gold/Black
BU362-932Brush Alum/Black
BU362-933Brush Silver/Black
BU362-934Euro Gold/Black
BU362-935Euro Gold/Black
BU362-936Brush Alum/Blue
BU362-937Smooth Gold/Black
362-938Smooth Silver/Black
362-939Brush Copper/Black
362-943Brush Bronze/White
362-946Brush Silver/Black
362-947Brush Gold/Black
362-948Brush Alum/Black
SURFACE CORE
COLOR
1/32”
Able Metallics
BlackBlackBlackBlackBlackBlackBlackBlueBlackBlackBlackWhiteBlackBlackBlack
CLEARGlossGlossGlossMatteGlossNoneMatteMatteGlossGlossGlossGlossNoneNoneNone
BU312-910
BU312-932BU312-933
1/16”
2 PLY
BU362-910BU362-930BU362-931BU362-932BU362-933BU362-934BU362-935BU362-936BU362-937BU362-938BU362-939BU362-943BU362-946BU362-947BU362-948
1/8”
BU382-931BU382-932
Brushed BrassEuropean GoldBrushed GoldBrushed AluminumBrushed SilverEuropean GoldEuropean GoldBrushed AluminumSmooth GoldSmooth SilverBrushed CopperBrushed BronzeBrushed SilverBrushed GoldBrushed Aluminum
- Item is Clear Coated for scratch resistance.
• Indoor• Outdoor• Bevels• Saws• Drills• Scores• Bonds
• UV Stable & Outdoor Weatherable• Laser Vector Cuts• Screen Prints• Hot Stamps• Heat Bendable• Permits Detailed Engraving
NEW!
INTERIOR & EXTERIOR SIGNAGE, PERSONAL IDENTIFICATIONABLE SERIES ALL WEATHER PREMIER METALS
SURFACE CORE
COLOR
1/16”
2 PLYAble All Weather Premier Metals
BlackBlackBlack
BU962-301BU962-302BU962-303
Brushed StainlessBrushed CopperBrushed Gold
.003 Polymer Capped Impact Acrylic
Brushed
1/16”
Laser or Rotary Carbide
.005”
24 1/4 x 49”
BU962-301Brushed Stainless/Black
BU962-302Brushed Copper/Black
BU962-303Brushed GoldBlack
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
15
INTERIOR SIGNAGE & PERSONAL IDENTIFICATION
SURFACE CORE
COLOR
1/16”
2 PLYAble Microsurfaces
Pine GreenWhiteBlackRedBlueBlackWhiteWhiteWhiteWhiteWhiteWhiteWhiteWhiteWhiteWhiteWhiteBlackWhiteWhiteWhiteBlackWhiteBright WhiteBright WhiteBright WhiteBright WhiteBright WhiteBright White
BU262-711BU262-719BU262-720BU262-721BU262-722BU262-723BU262-724BU262-725BU262-726BU262-727BU262-728BU262-729BU262-736BU262-737BU262-739BU262-740BU262-749BU262-756BU262-762BU262-763BU262-764BU262-765BU262-766BU262-824BU262-825BU262-826BU262-827BU262-828BU262-829
1/8”
3 PLY
BU283-720
BU283-724BU283-725
BU283-727
WhiteLight BlueWhiteWhiteWhiteYellowBlackBlueDark BrownRedPine GreenBurgundyMed BrownSapphire BlueGreyBright GreenOrangeAlmondNavy BluePurpleLight GreyLight GreyCeladon GreenBlackBlueDark BrownRedPine GreenBurgundy
SURFACE CORE
COLOR
1/16”
2 PLYAble Woodgrains
WhiteWhiteWhiteBright WhiteBright WhiteBright White
BU262-730BU262-752BU262-753BU262-830BU262-852BU262-853
Light WalnutMedium WalnutMystic WalnutLight WalnutMedium WalnutMystic Walnut
BU262-711White/Pine Green
BU262-719Lt Blue/White
BU262-720White/Black
BU262-721White/Red
BU262-722White/Blue
BU262-723Yellow/Black
BU262-724Black/White
BU262-725Blue/White
BU262-726Dk Brown/White
BU262-727Red/White
BU262-728Pine Green/White
BU262-729Burgundy/White
BU262-736Med Brown/White
BU262-737Sapphire Blue/White
BU262-739Grey/White
BU262-740Bright Green/White
BU262-749Orange/White
BU262-756Almond/Black
BU262-762Navy Blue/White
BU262-763Purple/White
BU262-764Lt Grey/White
BU262-765Lt Grey/Black
BU262-766Celadon/White
BU262-824Black/Bright White
BU262-825Blue/Bright White
BU262-826Dk Brown/Bright White
BU262-827Red/Bright White
BU262-828Pine Green/Bright White
BU262-829Burgundy/Bright White
BU262-730Light Walnut/White
BU262-753Mystic Walnut/White
BU262-830Light Walnut/Bright White
• Indoor• Scores• Shears• Saws• Drills• Bevels• Bonds
• Heat Bendable• Screen Prints• Hot Stamps• Permits Detailed Engraving
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced ABS
Matte Non-Glare, Woodgrain
1/16“, 1/8”
Rotary
.003” (.08mm)
24 1/4 x 49”
CHARACTERISTICS:Material Specifications:
BU262-752Medium Walnut/White
BU262-853Mystic Walnut/Bright White
BU262-852Medium Walnut/Bright White
ABLE SERIES MICROSURFACES & WOODGRAINS
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
16
• Indoor• Bonds• Saws• Drills• Bevels
• Heat Bendable• Screen Prints• Hot Stamps• Braille Engravable• Rotary / Routable• Permits Detail Engraving
Material
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced ABS*
.060” *
Rotary Carbide*
.003”
24 1/4 x 49”
CHARACTERISTICS: Material Specifications:
BU762-500White/Black
INTERIOR SIGNAGE & PERSONAL IDENTIFICATION
NEW!
SURFACE CORE
COLOR
1/16”
2 PLYAble Interior Satins
BlackRedBlueBlackRedBlueWhiteWhiteBlackWhiteWhiteWhiteWhiteWhiteWhiteWhiteRedWhiteWhite
BU762-500BU762-501BU762-502BU762-700BU762-701BU762-702BU762-704BU762-705BU762-706BU762-707BU762-708BU762-713BU762-714BU762-715BU762-718BU762-720BU762-725BU762-728BU762-732
WhiteWhiteWhiteTrue WhiteTrue WhiteTrue WhiteBlackBlueYellowRedPine GreenAir Force BlueMedium BrownBright GreenOrangePurpleYellowNavy BlueDark Brown
ABLE SERIES INTERIOR SATINS
BU762-501White/Red
BU762-502White/Blue
BU762-700True White/Black
BU762-701True White/Red
BU762-702True White/Blue
BU762-704Black/White
BU762-705Blue/White
BU762-706Yellow/Black
BU762-707Red/White
BU762-708Pine Green/White
BU762-715Bright Green/White
BU762-713Air Force Blue/White
BU762-714Medium Brown/White
BU762-718Orange/White
BU762-720Purple/White
BU762-725Yellow/Red
BU762-728Navy Blue/White
BU762-732Dark Brown/White
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
FOR THERMAL RIBBON PRINTERS
NEW! ABLE SERIES PRINT RECEPTIVES
17
• Indoor• Bonds• Saws• Drills• Bevels
• Heat Bendable• Screen Prints• Hot Stamps• Braille Engravable• Rotary / Routable
Material
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced ABS*
.060” *
Rotary Carbide*
.003”
24 1/4 x 49”
CHARACTERISTICS:Material Specifications:
SURFACE CORE
COLOR Rotary engravble plastic for Thermal Ribbon Printers!
.060” PLY
Able Print Receptive Rotary Engravables
BlackRedBlueBlackBlackBlack
FINISHGlossGlossGlossGlossGlossGlossGloss
PR162-100PR162-155PR162-156PR162-157PR362-930PR362-932PR362-933
1222222
Monolithic WhiteWhiteWhiteWhiteEuropean GoldBrushed AluminumRadiant Silver
PR162-100MonolithicWhite
PR162-155White/Black
PR162-156White/Red
PR162-157White/Blue
PR362-930European Gold/Black
PR362-933Radiant Silver/Black
PR362-932Brushed Alum/Black
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
18
INTERIOR SIGNAGE & PERSONAL IDENTIFICATIONABLE SERIES INK RECEPTIVES NEW!
Able Series Ink Receptives are designed to meet the needs of the fast growing market of digital printing with an engravable plastic sheet product that is also print receptive. Ink Receptives allow for direct printing via Inkjet, Flatbed Digital Print UV & UV/LED or Solvent-Based Inkjet printers. This allows you to print full color graphics directly to the material surface then transfer the entire sheet to your engraving machine for finishing.
Ink Receptives are available in both ABS and Acrylic cores in full-size 24”x48” sheets to satisfy the needs both rotary and laser engravers alike.
See page 19 for available options.
Able SeriesINK RECEPTIVE PLASTIC
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
IR962-100Gloss White
LASERABLE ENGRAVABLE
ROTARY ENGRAVABLE
NEW!
IR962-155Gloss White/Black
IR962-156Gloss White/Red
IR962-157Gloss White/Blue
IR962-750Matte White/Black
IR962-751Matte White/Red
IR962-752Matte White/Blue
IR962-900European Gold/Black
IR962-901Brushed Alum/Black
* Additional gauges and substrates are available.Please call for more information.
Laserable Acrylic Core for Inkjet, Flatbed UV & UVLED or Solvent Inkjet Printers
IR162-100Gloss White
IR162-155Gloss White/Black
IR162-156Gloss White/Red
IR162-157Gloss White/Blue
IR262-720Matte White/Black
IR262-721Matte White/Red
IR262-722Matte White/Blue
IR362-930European Gold/Black
IR362-932Brushed Alum/Black
19
SURFACE CORE
COLOR
.060”
Able Ink Receptive Laser Engravables
FINISH PLY
ABLE SERIES INK RECEPTIVES
NEW! ABLE SERIES INK RECEPTIVES
• Indoor• Bonds• Saws• Drills• Bevels• Scores• Heat Bendable
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced Acrylic*
Gloss, Matte
.060” *
Laser or Rotary Carbide*
.003”
24 1/4 x 49”
CHARACTERISTICS:Material Specifications:
• Indoor• Bonds• Saws• Drills• Shears• Bevels• Scores• Heat Bendable
• Screen Prints• Hot Stamps• Braille Engravable• Rotary / Routable• Ink-Jet Receptive (UV & UV-LED)• Flatbed Digital Print w/ UV & LED
Curing Inks
Material
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced ABS*
.060” *
Rotary Carbide*
.003”
24 1/4 x 49”
CHARACTERISTICS:Material Specifications:
SURFACE CORE
COLOR Rotary ABS Core for Inkjet, Flatbed UV & UVLED or Solvent Inkjet Printers.060”
Able Ink Receptive Rotary Engravables
BlackRedBlueBlackRedBlueBlackBlack
FINISHGlossGlossGlossGlossMatteMatteMatteGlossGloss
IR162-000IR162-155IR162-156IR162-157IR262-720IR262-721IR262-722IR362-930IR362-932
122222222
Gloss WhiteGloss WhiteGloss WhiteGloss WhiteMatte WhiteMatte WhiteMatte WhiteEuropean GoldBrushed Aluminum
BlackRedBlue
BlackRedBlueBlackBlack
GlossGlossGlossGlossMatteMatteMatteMatteGlossGloss
IR962-000IR962-155IR962-156IR962-157IR962-700IR962-750IR962-751IR962-752IR962-900IR962-901
1222122222
Gloss WhiteGloss WhiteGloss WhiteGloss WhiteMatte WhiteMatte WhiteMatte WhiteMatte WhiteEuropean GoldBrushed Aluminum
• Screen Prints• Hot Stamps• Braille Engravable• Laser Vector Cuts• Rotary / Routable• Ink-Jet Receptive (UV & UV-LED)• Flatbed Digital Print w/ UV & LED
Curing Inks
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
• Indoor• Scores• Saws• Drills• Shears• Bevels
• Heat Bendable• Screen Prints• Hot Stamps• Braille Engravable• Detailed Engraving
• For All-Weather Matte Laserablematerial, see page 8.
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced ABS
Matte Non-Glare
1/32”, 1/16“, 1/8“
Rotary
.003” (.08mm)
24” x 48 3/4”
CHARACTERISTICS: Material Specifications:
20
FOR INKJET, FLATBED DIGITAL UV & UVLED OR SOLVENT INKJET PRINTERSINTERIOR SIGNAGE & IDENTIFICATIONROWMARK MATTES
222-204White/Black
222-205White/Blue
222-206White/Red
222-312Medium Grey/White
222-322Lt Grey/White
222-324Lt Grey/Black
222-325Lt Grey/Marine Blue
222-326Light Grey/Burgundy
222-382China Blue/White
222-402Black/White
222-412Black/Bright White
222-502Sapphire/White
222-512Blue/White
222-552Navy Blue/White
222-562Light Blue/White
222-572Blue/Bright White
222-582Purple/White
222-209White/Bright Green
222-226White/Burgundy
222-228Ivory/Dark Brown
222-269White/Pine Green
222-602Red/White
222-612Orange/White
222-622Burgundy/White
222-642Red/Bright White
222-842Dk Brown/White
222-854Almond/Black
222-912Pine Green/White
222-932Br Green/White
222-972Celadon Green/White
222-002Black Walnut/White
222-172Walnut/White
222-192English Walnut/Bright White
222-662Ribbon Pink/White
222-664Ribbon Pink/Black
222-744Yellow/Black
222-822Med Brown/White
SURFACE CORE 1/32”
COLOR
1/16”
2 PLY
1/8”
3 PLYRowmark Mattes
BlackBlueRedBright GreenBurgundyDark BrownPine GreenWhiteWhiteBlackMarine BlueBurgundyWhiteWhiteBright WhiteWhiteWhiteWhiteBright WhiteBright WhiteWhiteWhiteWhiteWhiteBright WhiteWhiteBlackBlackWhiteWhiteBlackWhiteWhiteWhiteWhiteWhiteBright White
222-204222-205222-206222-209222-226222-228222-269222-312222-322222-324222-325222-326222-382222-402222-412222-502222-512222-552222-562222-572222-582222-602222-612222-622222-642222-662222-664222-744222-822222-842222-854222-912222-932222-972222-002222-172222-192
212-204
212-402
212-512
212-562
212-602
243-204
243-402
243-512
243-562243-572
243-602
243-642
243-002243-172243-192
1/16”223-204223-205223-206223-209223-226223-228223-269223-312223-322223-324223-325223-326223-382223-402
223-502223-512223-552223-562
223-582223-602223-612223-622
223-744223-822223-842223-854223-912223-932223-972
WhiteWhiteWhiteWhiteWhiteIvoryWhiteMedium GreyLight GreyLight GreyLight GreyLight GreyChina BlueBlackBlackSapphireBlueNavy BlueLight BlueBluePurpleRedOrangeBurgundyRedRibbon PinkRibbon PinkYellowMedium BrownDark BrownAlmondPine GreenBright GreenCeladon GreenBlack WalnutWalnutEnglish Walnut
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
INTERIOR SIGNAGE
SURFACE CORE 1/32”
COLOR
1/16”
2 PLY
1/16” 1/8”
3 PLYRowmark Satins
3/32”BlackBlueRedDark BrownBright GreenOrangeDark BrownBlackBlueBright GreenRedPine GreenWhiteBlackWhiteWhiteWhiteRedYellowBright WhiteGoldSilverWhiteYellowWhiteSilverWhiteWhiteWhiteWhiteBlackYellowWhiteBlackWhiteBlackBlueRedWhiteWhiteDark BrownWhiteBlackWhiteWhiteWhiteWhite
122-204122-205122-206122-208122-209122-216122-228122-234122-235122-239122-246122-269122-302122-304122-312122-362122-402122-406122-407122-412122-417122-423122-512122-517122-532122-533122-542122-552122-582122-602122-604122-607122-612122-614122-622122-704122-705122-706122-822122-832122-838122-842122-854122-902122-912122-932122-942
112-204112-205112-206112-208112-209112-216112-228112-234
112-269112-302112-304112-312112-362112-402112-406112-407112-412112-417112-423112-512112-517112-532112-533112-542112-552112-582112-602112-604112-607112-612112-614112-622112-704112-705112-706112-822112-832112-838112-842112-854112-902112-912112-932112-942
132-204132-205132-206132-208132-209
132-228132-234
132-269132-302132-304132-312132-362132-402132-406132-407
132-417132-423132-512132-517132-532132-533132-542132-552132-582132-602132-604132-607132-612132-614132-622132-704132-705132-706132-822132-832132-838132-842132-854132-902132-912132-932132-942
123-204123-205123-206123-208123-209
123-228123-234
123-269123-302123-304123-312
123-402123-406123-407
123-417123-423123-512123-517123-532123-533123-542123-552123-582123-602123-604123-607123-612123-614123-622123-704123-705123-706123-822123-832123-838123-842123-854123-902123-912123-932123-942
143-204143-205143-206143-208143-209143-216143-228143-234
143-269143-302143-304143-312143-362143-402143-406143-407143-412143-417143-423143-512143-517143-532143-533143-542143-552143-582143-602143-604143-607143-612143-614143-622143-704143-705143-706143-822143-832143-838143-842143-854143-902143-912143-932143-942
ROWMARK SATINS
WhiteWhiteWhiteWhiteWhiteWhiteIvoryPolar WhitePolar WhitePolar WhitePolar WhiteWhiteMedium GreySilver GreyMetallic GreyBattleship GreyBlackBlackBlackBlackBlackBlackBlueBlueAir Force BlueBlueMetallic BlueNavy BluePurpleRedRedRedOrangeBurnt OrangeBurgundyYellowYellowYellowMedium BrownBeigeBeigeDark BrownAlmondGreenPine GreenBright GreenAqua
122-204White/Black
122-205White/Blue
122-206White/Red
122-234Polar White/Black
122-235Polar White/Blue
122-239Polar White/Bright Green
122-246Polar White/Red
122-269White/Pine Green
122-302Grey/White
122-304Grey/Black
122-312Metallic GreyWhite
122-362Battleship Grey/White
122-402Black/White
122-406Black/Red
122-407Black/Yellow
122-412Black/Bright White
122-417Black/Gold
122-208White/Dark Brown
122-209White/Bright Green
122-216White/Orange
122-228Ivory/Dark Brown
122-423Black/Silver
122-512Blue/White
122-517Blue/Yellow
122-532Air Force Blue/White
122-602Red/White
122-604Red/Black
122-607Red/Yellow
122-612Orange/White
122-614Burnt Orange/Black
122-622Burgundy/White
122-704Yellow/Black
122-705Yellow/Blue
122-706Yellow/Red
122-822Medium Brown/White
122-832Beige/White
122-838Beige/Dark Brown
122-842Dark Brown/White
122-854Almond/Black
122-902Green/White
122-912Pine Green/White
122-932Bright GreenWhite
122-942Aqua/White
122-533Blue/Silver
122-542Metallic Blue/White
122-552Navy Blue/White
122-582Purple/White
21
• Indoor• Scores• Saws• Drills• Shears
• Bevels• Heat Bendable• Screen Prints• Hot Stamps• Bonds
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Acrylic Cap / ABS Core
Brushed
1/32”, 1/16“, 3/32”, 1/8“
Rotary
.012” (.3mm)
24” x 48 3/4”
CHARACTERISTICS:Material Specifications:
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
• Outdoor• Indoor• Saws• Drills• Bevels• Bonds• Back-lighting*
• UV Stable• Laser Vector Cuts• Heat Bendablea• Screen Prints• Hot Stamps• Permits Detailed Engraving• Sand Blasts• Braille Engravable
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
High Impact Modified Acrylic Blends
Matte Non-Glare
.010”, .020“, 1/16”
Laser, Rotary
.005”
24 1/8” x 49”
CHARACTERISTICS: Material Specifications:
22
INTERIOR & EXTERIOR SIGNAGE
NEW!ROWMARK ULTRAGRAVE™ MATTES
SURFACE CORE
COLOR
.010”
2 PLY
.020”
Rowmark UltraGrave Mattes
Clear*BlackRedBlueTaupeBlackClear*WhiteGoldSilver GrayGoldWhiteWhiteWhiteGoldWhiteGoldWhiteBlackWhiteBlackWhiteGoldGoldBlackWhiteWhiteWhiteWhiteBlackWhiteWhiteWhiteWhiteWhiteWhiteEggshellGold
* Clear core is suitable for back-lighting.
UG662-204
UG662-402
UG662-512
UG662-602
UG662-704
UG602-201UG602-204
UG602-401UG602-402
UG602-512
UG602-597UG602-602
UG602-704
UG602-932
1/16”UG922-201UG922-204UG922-205UG922-206UG922-208UG922-304UG922-401UG922-402UG922-417UG922-423UG922-427UG922-512UG922-532UG922-552UG922-557UG922-592UG922-597UG922-602UG922-604UG922-612UG922-614UG922-622UG922-627UG922-637UG922-704UG922-802UG922-822UG922-832UG922-842UG922-854UG922-862UG922-882UG922-912UG922-932UG922-942UG922-992UG922-993UG922-997
WhiteWhiteWhiteWhiteWhiteLight GrayBlackBlackBlack MatteBlack Black GlossBlueAir Force BlueNavy BlueNavy BlueRoyal BlueRoyal BlueRedRedOrangeOrangeBurgundyBurgundyRedYellowTaupeBrownCraftsmenChocolate BrownAlmondTorridExoticaPine GreenApple GreenTurbulentForest GreenForest GreenForest Green
UG922-201White/Clear
UG922-204White/Black
UG922-205White/Red
UG922-402Black/White
UG922-417Matte Black/Gold
UG922-423Black/Silver Gray
UG922-427Matte Black/Gold
UG922-512Blue/White
UG922-532Air Force Blue/White
UG922-552Navy Blue/White
UG922-557Navy Blue/Gold
UG922-592Royal Blue/White
UG922-597Royal Blue/Gold
UG922-602Red/White
UG922-604Red/Black
UG922-612Orange/White
UG922-614Orange/Black
UG922-206White/Blue
UG922-208White/Taupe
UG922-201Light Gray/Black
UG922-401Black/Clear
UG922-622Burgundy/White
UG922-622Burgundy/Gold
UG922-637Red/Gold
UG922-704Yellow/Black
UG922-854Almond/Black
UG922-862Torrid/White
UG922-882Exotica/White
UG922-912Pine Green/White
UG922-932Apple Green/White
UG922-942Turbulent/White
UG922-992Forest Green/White
UG922-993Forest Green/Eggshell
UG922-997Forest Green/Gold
UG922-802Taupe/White
UG922-822Brown/White
UG922-832Craftsmen/White
UG922-842Chocolate Brown/White
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
NEW!
INTERIOR & EXTERIOR SIGNAGE
SURFACE CORE
COLOR
1/16”
2 PLYRowmark UltraGrave Satins
BlackRedBlueWhiteSilver GrayWhiteWhiteWhiteWhiteWhiteBlackWhiteBlackWhiteBlackWhiteWhiteWhiteWhiteBlackWhiteWhiteWhiteWhiteWhiteWhiteEggshell
UG122-204UG122-205UG122-206UG122-402UG122-423UG122-512UG122-532UG122-552UG122-592UG122-602UG122-604UG122-612UG122-614UG122-622UG122-704UG122-802UG122-822UG122-832UG122-842UG122-854UG122-862UG122-882UG122-912UG122-932UG122-942UG122-992UG122-993
ROWMARK ULTRAGRAVE™ SATINS
WhiteWhiteWhiteBlackBlackBlueAir Force BlueNavy BlueRoyal BlueRedRedOrangeOrangeBurgundyYellowTaupeBrownCraftsmenChocolate BrownAlmondTorridExoticaPine GreenApple GreenTurbulentForest GreenForest Green
23
• Outdoor• Indoor• Saws• Drills• Bevels• Bonds• UV Stable
• Laser Vector Cuts• Heat Bendablea• Screen Prints• Hot Stamps• Permits Detailed Engraving• Sand Blasts• Braille Engravable
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
High Impact Modified Acrylic Blends
Satin
1/16”
Laser, Rotary
.005”
24 1/8” x 49”
CHARACTERISTICS:Material Specifications:
UG122-204White/Black
UG122-205White/Red
UG122-206White/Blue
UG122-552Navy Blue/White
UG122-592Royal Blue/White
UG122-602Red/White
UG122-604Red/Black
UG122-612Orange/White
UG122-614Orange/Black
UG122-622Burgundy/White
UG122-704Yellow/Black
UG122-802Taupe/White
UG122-822Brown/White
UG122-832Craftsmen/White
UG122-842Chocolate Brown/White
UG122-854Almond/Black
UG122-862Torrid/White
UG122-402Black/White
UG122-423Black/Silver Gray
UG122-512Blue/White
UG122-532Air Force Blue/White
UG122-882Exotica/White
UG122-912Pine Green/White
UG122-932Apple Green/White
UG122-942Turbulent/White
UG122-992Forest Green/White
UG122-993Forest Green/Eggshell
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
322-204White/Black
322-205White/Blue
322-206White/Red
322-236Cement/Garnet
322-238Cement/Canyon
322-244AshCinder
322-246Ash/Garnet
322-302Charcoal Grey/White
322-312Sea Grey/White
322-382China Blue/White
322-384Vintage Silver/Black
322-392Graphite/White
322-217White/Gold
322-218Sandalwood/Canyon
322-219Sandalwood/Balsam
322-228Ivory/Dark Brown
322-402Black/White
322-407Black/Yellow
322-413Cinder/Clay
322-517Blue/Yellow
322-527Blueberry/Gold
322-542Blueberry/White
322-562Sapphire/White
322-592Ocean Blue/White
322-595Driftwood/Alpine
322-602Red/White
322-607Red/Yellow
322-632Ruby/White
322-417Black/Gold
322-423Black/Silver
322-432Cinder/White
322-512Blue/White
322-642Garnet/Ash
322-662Dusty Rose/White
322-704Yellow/Black
322-823Canyon/Cement
322-832Beige/White
322-838Beige/Dark Brown
322-842Dark Brown/White
322-862Canyon/Ash
322-902Black ForestGreen/ White
322-932Bright Green/White
322-942Balsam/Ash
322-962Teal/White
322-774Vintage Gold/Black
322-794Safety Yellow/Black
322-802Taupe/White
322-814Parchment/Black
322-972Celadon Green/White
322-992Hunter Green/White
322-997Hunter Green/Gold
• Outdoor• Indoor• Saws• Drills• Bevels• UL approved for component products -yellowcard E534751.
• Heat Bendable• Screen Prints• Hot Stamps• Bonds• UV Stable
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Laminated Impact Acrylic
Matte Non-Glare
1/16“, 1/8
Rotary
.012” (.3mm)
24” x 48 3/4”
CHARACTERISTICS: Material Specifications:
24
INTERIOR & EXTERIOR SIGNAGEROWMARK ULTRA-MATTES FRONT
SURFACE CORE
COLOR
1/16”
2 PLY 3 PLY
1/8”
Rowmark Ultra-Mattes Front
BlackBlueRedGoldCanyonBalsamDk BrownGarnetCanyonCinderGarnetWhiteWhiteWhiteBlackWhiteWhiteYellowClayGoldSilverWhiteWhiteYellowGoldWhiteWhiteWhiteAlpineWhiteYellowWhiteAshWhiteBlackBlackBlackWhiteBlackCementWhiteDk BrownWhiteAshWhiteWhiteAshWhiteWhiteWhiteGold
322-204322-205322-206322-217322-218322-219322-228322-236322-238322-244322-246322-302322-312322-382322-384322-392322-402322-407322-413322-417322-423322-432322-512322-517322-527322-542322-562322-592322-595322-602322-607322-632322-642322-662322-704322-774322-794322-802322-814322-823322-832322-838322-842322-862322-902322-932322-942322-962322-972322-992322-997
342-204342-205342-206342-217342-218342-219342-228342-236342-238342-244342-246342-302342-312342-382342-384342-392342-402342-407342-413342-417342-423342-432342-512342-517342-527342-542342-562342-592342-595342-602342-607342-632342-642342-662342-704342-774342-794342-802342-814342-823342-832342-838342-842342-862342-902342-932342-942342-962342-972342-992342-997
1/8”343-204343-205343-206343-217343-218343-219343-228343-236343-238343-244343-246343-302343-312343-382343-384343-392343-402343-407343-413343-417343-423343-432343-512343-517343-527343-542343-562343-592343-595343-602343-607343-632343-642343-662343-704343-774343-794343-802343-814343-823343-832343-838343-842343-862343-902343-932343-942343-962343-972343-992343-997
WhiteWhiteWhiteWhiteSandalwoodSandalwoodIvoryCementCementAshAshCharcoal GreySea GreyChina BlueVintage SilverGraphiteBlackBlackCinderBlackBlackCinderBlueBlueBlueberryBlueberrySapphireOcean BlueDriftwoodRedRedRubyGarnetDusty RoseYellowVintage GoldSafety YellowTaupeParchmentCanyonBeigeBeigeDark BrownCanyonBlack Forest GreenBright GreenBalsamTealCeladon GreenHunter GreenHunter Green
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
INTERIOR & EXTERIOR SIGNAGEROWMARK ULTRA-MATTES REVERSE
25
• Outdoor• Indoor• Saws• Drills• Bevels• Heat Bendable• Screen Prints• UL approved for component products -yellowcard E534751.
• Hot Stamps• Bonds• Thermal Prints• Ink Prints• UV Stable• Embosses• Braille Compatible
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Laminated Impact Acrylic for Reverse Engraving
Matte Non-Glare
1/32”, 1/16”, 1/8”
Rotary
.012” (.3mm)
24” x 48 3/4”
CHARACTERISTICS:Material Specifications:
322-101Matte/Clear
322-201Matte/White
322-211Matte/Sandalwood
322-311Matte/Sea Grey
322-371Matte/Vintage Silver
322-381Matte/China Blue
322-391Matte/Graphite
322-401Matte/Black
322-431Matte/Cinder
322-511Matte/Blue
322-541Matte/Blueberry
322-221Matte/Ash
322-231Matte/Ivory
322-241Matte/Cement
322-301Matte/Charcoal grey
322-561Matte/Sapphire
322-581Matte/Driftwood
322-591Matte/Ocean Blue
322-701Matte/Yellow
322-731Matte/Vintage Gold
322-801Matte/Taupe
322-811Matte/Parchment
322-831Matte/Beige
322-841Matte/Dark Brown
322-861Matte/Canyon
322-901Matte/Black Forest Green
322-911Matte/Bright Green
322-601Matte/Red
322-631Matte/Ruby
322-651Matte/Orange
322-661Matte/Dusty Rose
322-921Matte/Teal
322-931Matte/Celadon Green
322-991Matte/Hunter Green
SURFACE CORE
COLOR
1/32”
2 PLY
1/16” 1/8”
Rowmark Ultra-Mattes Reverse
ClearWhiteSandalwoodAshIvoryCementCharcoal GreySea GreyVintage SilverChina BlueGraphiteBlackCinderBlueBlueberrySapphireDriftwoodOcean BlueRedRubyOrangeDusty RoseYellowVintage GoldTaupeParchmentBeigeDark BrownCanyonBlack Forest GreenBright GreenTealCeladon GreenHunter Green
322-101322-201322-211322-221322-231322-241322-301322-311322-371322-381322-391322-401322-431322-511322-541322-561322-581322-591322-601322-631322-651322-661322-701322-731322-801322-811322-831322-841322-861322-901322-911322-921322-931322-991
311-101312-201312-211312-221312-231312-241312-301312-311312-371312-381312-391312-401312-431312-511312-541312-561312-581312-591312-601312-631312-651312-661312-701312-731312-801312-811312-831312-841312-861312-901312-911312-921312-931312-991
342-101342-201342-211342-221342-231342-241342-301342-311342-371342-381342-391342-401342-431342-511342-541342-561342-581342-591342-601342-631342-651342-661342-701342-731342-801342-811342-831342-841342-861342-901342-911342-921342-931342-991
MatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatteMatte
• For Reverse Laserable material, see pages 9 & 31.
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
• Outdoor• Indoor• Saws• Drills• Shears• Bevels
• Laser Vector Cuts• Heat Bendable• Screen Prints• Hot Stamps• Bonds• UV Stable*
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced Impact Acrylic
Matte, Non-Glare, Gloss, Brushed Metal
NoMark Coating Available
1/16”
Laser, Rotary
.003” (.08mm)
24” x 48 3/4”
CHARACTERISTICS: Material Specifications:
26
INTERIOR & EXTERIOR SIGNAGEROWMARK LASERMAX®
LM922-204White/Black
LM922-205White/Sky Blue
LM922-206White/Crimson
LM922-312Smoke Grey/White
LM922-324Light Grey/Black
LM922-325Light Grey/Marine Blue
LM922-326Light Grey/Burgundy
LM922-334Brushed Silver/Black
LM922-344Smooth Silver/Black
LM922-354Brushed Alum/Black
LM922-382China Blue/White
LM922-209White/Bright Green
LM922-226White/Burgundy
LM922-228Ivory/Dark Brown
LM922-269White/Pine Green/
LM922-402Black/White
LM922-407Black/Yellow
LM922-413Black/Silver
LM922-512Sky Blue/White
LM922-517Sky Blue/Yellow
LM922-552Patriot Blue/White
LM922-562Light Blue/White
LM922-577Celestial Blue/Gold
LM922-582Purple/White
LM922-602Crimson/White
LM922-607Crimson/Yellow
LM922-417Black/Gold
LM922-422Gloss Black/White
LM922-427Gloss Black/Gold
LM922-502Sapphire/White
SURFACE CORE
COLOR 3 PLY2 PLY
1/8” 1/8”1/32” 1/16”
Rowmark LaserMax
BlackSky BlueCrimsonBright GreenBurgundyDark BrownPine GreenWhiteBlackMarine BlueBurgundyBurgundyBlackBlackWhiteWhiteYellowSilverGoldWhiteGoldWhiteWhiteYellowWhiteWhiteGoldWhiteWhiteYellow
LM922-204LM922-205LM922-206LM922-209LM922-226LM922-228LM922-269LM922-312LM922-324LM922-325LM922-326LM922-334LM922-344LM922-354LM922-382LM922-402LM922-407LM922-413LM922-417LM922-422LM922-427LM922-502LM922-512LM922-517LM922-552LM922-562LM922-577LM922-582LM922-602LM922-607
LM912-204
LM912-354
LM912-402
LM912-512
LM912-602
LM942-204
LM942-354
LM942-402
LM942-512
LM942-602
LM943-204
LM943-354
LM943-402
LM943-512
LM943-602
WhiteWhiteWhiteWhiteWhiteIvoryWhiteSmoke GreyLight GreyLight GreyLight GreyBrushed Silver**Smooth Silver**Brushed Aluminum**China BlueBlackBlackBlackBlackGloss BlackGloss BlackSapphireSky BlueSky BluePatriot BlueLight BlueCelestial BluePurpleCrimsonCrimson
** Metals not recommended for outdoor applications.
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
INTERIOR & EXTERIOR SIGNAGEROWMARK LASERMAX®
LM922-612Tangerine/White
LM922-622Claret/White
LM922-662Ribbon Pink/White
LM922-714Smooth Gold/Black
LM922-734Brushed GoldBlack
LM922-754European Gold/Black
LM922-822Medium Brown/White
LM922-842Dark Brown/White
LM922-854AlmondBlack
LM922-872Brushed Bronze/White
LM922-874Brushed Bronze/Black
LM922-884Deep Bronze/Black
LM922-664Ribbon Pink/Black
LM922-677Port Wine/Gold
LM922-704Canary/Black
LM922-894Brushed Copper/Black
LM922-912Evergreen/White
LM922-932Kelley Green/White
LM922-937Verde/Gold
LM922-972Celadon Green/White
LM922-012Kona/White
LM922-082Kona/Ash
LM922-022Cinnamon Stick/Ash
LM922-222Cinnamon Stick/White
LM922-112Toffee/White
LM922-122Toffee/Ash
LM922-134Cashew/Black
LM922-138Cashew/Taupe
LM922-188Cashew/Dark Brown
27
• Outdoor• Indoor• Saws• Drills• Shears• Bevels
• Laser Vector Cuts• Heat Bendable• Screen Prints• Hot Stamps• Bonds• UV Stable*
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced Impact Acrylic
Matte, Non-Glare, Gloss, Brushed Metal
NoMark Coating Available
1/16”
Laser, Rotary
.003” (.08mm)
24” x 48 3/4”
CHARACTERISTICS:Material Specifications:
SURFACE CORE
COLOR 3 PLY2 PLY
1/8” 1/8”1/32” 1/16”
Rowmark LaserMax
WhiteWhiteWhiteBlackGoldBlackBlackBlackBlackWhiteWhiteBlackWhiteBlackBlackBlackWhiteWhiteGoldWhiteWhiteAshAshWhiteWhiteAshBlackTaupeDark Brown
LM922-612LM922-622LM922-662LM922-664LM922-677LM922-704LM922-714LM922-734LM922-754LM922-822LM922-842LM922-854LM922-872LM922-874LM922-884LM922-894LM922-912LM922-932LM922-937LM922-972LM922-012LM922-082LM922-022LM922-222LM922-112LM922-122LM922-134LM922-138LM922-188
LM912-704
LM912-734LM912-754
LM942-704
LM942-734LM942-754
LM942-704
TangerineClaretRibbon PinkRibbon PinkPort Wine*CanarySmooth Gold**Brushed Gold**European Gold**Medium BrownDark BrownAlmondBrushed Bronze**Brushed Bronze**Deep Bronze**Brushed Copper**EvergreenKelley GreenVerdeCeladon GreenKona*Kona*Cinnamon StickCinnamon StickToffeeToffeeCashewCashewCashew
* Port Wine sheet size 23 1/2” x 49”* Kona sheet size 23 5/8” x 49”** Metals not recommended for outdoor applications.
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
28
• Outdoor• Indoor• Saws• Drills• Bevels• Bonds• UL approved for component products -yellowcard E534751.
• UV Stable• Laser Vector Cuts• Heat Bendable• Screen Prints• Hot Stamps• Permits Detailed Engraving
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Co-Extruded Impact Acrylic
Textured
1/16”, 1/8”
Laser, Rotary
.007” (.010mm Acid Yellow)
24” x 48 3/4”
CHARACTERISTICS: Material Specifications:
INTERIOR & EXTERIOR SIGNAGEROWMARK TEXTURES
822-205Winter White/Blue
822-244Winter White/Black
822-246Winter White/Red
822-503Sapphire/White
822-592Royal Blue/White
822-622Ruby/White
822-642Pimento/White
822-652Tangerine/White
822-774Acid Yellow/Black
822-778Acid Yellow/Dark Brown
822-854Desert Sand/Black
822-892Coffee Bean/White
822-962Jungle Green/White
822-992Teal/White
822-258Bermuda Tan/Brown
822-302Ash Grey/White
822-374Ash Grey/Black
822-422Coal Black/White
SURFACE CORE
COLOR
1/16”
2 PLY
1/8”
Rowmark Textures
BlueBlackRedBrownWhiteBlackWhiteWhiteWhiteWhiteWhiteWhiteBlackDark BrownBlackWhiteWhiteWhite
822-205822-244822-246822-258822-302822-374822-422822-503822-592822-622822-642822-652822-774822-778822-854822-892822-962822-992
842-244
842-422
842-592
842-642
Winter WhiteWinter WhiteWinter WhiteBermuda TanAsh GreyAsh GreyCoal BlackSapphireRoyal BlueRubyPimentoTangerineAcid YellowAcid YellowDesert SandCoffee BeanJungle GreenTeal
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
INTERIOR SIGNAGE, TROPHIES & AWARDS
SURFACE
COLOR
.020”CORE
2 PLYRowmark FlexiBrass & FlexiColor
BlackBlackBlackBlackWhiteSilverBrassSilverBrassWhiteWhiteBrassWhiteWhiteBrassBlackBlueBlackBlackBlackBlackBlackBlackBrass
602-204602-334602-354602-394602-402602-413602-417602-423602-427602-512602-572602-577602-602602-672602-677602-734602-735602-744602-754602-794602-874602-884602-894602-937
ROWMARK FLEXIBRASS® & FLEXICOLOR®
WhiteBrushed SilverBrushed AluminumTrophy SilverBlackMatte BlackMatte BlackGlossy BlackGlossy BlackBlueCelestial BlueCelestial BlueRedPort WinePort WineBrushed GoldBrushed GoldYellowEuropean GoldTrophy GoldBrushed BronzeDeep BronzeBrushed CopperVerde
29
• Indoor• Scores• Saws• Drills• Shears• Bevels
• Laser Vector Cuts• Screen Prints• Hot Stamps• Permits Detailed Engraving
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced Impact Acrylic
Matte Non-Glare, Gloss, Patterned, Brushed Metal
.020“
Laser, Rotary and Burnish
.003” (.08mm)
24” x 48 3/4”
* 23.5” x 49”
CHARACTERISTICS:Material Specifications:
602-423Glossy Black/Silver
602-402Black/White
602-413Matte Black/Silver
602-417Matte Black/Brass
602-394Trophy Silver/Black
602-204White/Black
602-334Brushed Silver/Black
602-354Brushed Alum/Black
602-734Brushed Gold/Black
602-602Red/White
602-672Port Wine/White
602-677Port Wine/Brass
602-427Glossy Black/Brass
602-512Blue/White
602-572Celestial Blue/White
602-577Celestial Blue/Brass
602-937Verde/Brass
602-874Brushed Bronze/Black
602-884Deep Bronze/Black
602-894Brushed Copper/Black
602-794Trophy Gold/Black
602-735Brushed Gold/Blue
602-744Yellow/Black
602-754European Gold/Black
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
SURFACE CORE
COLOR
.052”
2 PLYRowmark LaserMark
WhiteWhiteWhiteWhiteBlackBlueRedBrownWhiteWhiteBlackBlackBlackWhiteYellowGoldWhiteGoldWhiteWhiteYellowWhiteGoldWhiteYellowGoldBlackBlackBlackBlackWhiteWhiteWhiteWhiteGold
922-002922-152922-172922-192922-204922-205922-206922-228922-312922-322922-334922-344922-354922-402922-407922-417922-422922-427922-502922-512922-517922-552922-577922-602922-607922-677922-704922-714922-734922-754922-822922-842922-912922-932922-937
Black WalnutCherryWalnutEnglish WalnutWhiteWhiteWhiteIvoryGreyLight GreyBrushed SilverSmooth SilverBrushed AluminumBlackBlackMatte BlackGloss BlackGloss BlackSapphireBlueBlueNavy BlueCelestial BlueRedRedPort Wine**YellowSmooth GoldBrushed GoldEuropean Gold*Medium BrownDark BrownPine GreenBright GreenVerde
922-002Black Walnut/White
922-152Cherry/White
922-172Walnut/White
922-734Brushed GoldBlack
922-192English Walnut/White
922-204White/Black
922-205White/Blue
922-206White/Red
922-228Ivory/Brown
922-312Grey/White
922-322Light Grey/White
922-402Black/White
922-407Black/Yellow
922-417Matte Black/Gold
922-422Gloss Black/White
922-427Gloss Black/Gold
922-502Sapphire/White
922-512Blue/White
922-517Blue/Yellow
922-552Navy Blue/White
922-577Celestial Blue/Gold
922-602Red/White
922-607Red/Yellow
922-704Yellow/Black
922-822Medium Brown/White
922-842Dark Brown/White
922-912Pine Green/White
922-932Bright Green/White
* Not recommended for harsh or high humidity indoor or outdoor applications.** Sheet Size - 23.5” x 49”
922-677Port Wine/Gold
922-714Smooth Gold/Black
922-937Verde/Gold
922-754European Gold/Black
922-354Brushed Aluminum/Black
922-334Brushed Silver/Black
922-344Smooth Silver/Black
• Scores• Saws• Drills• Bevels• Bonds
• Laser Vector Cuts• Screen Prints• Permits Detailed Engraving• Hot Stamps•Heat Bendable
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced Impact Acrylic
Matte Non-Glare, Brushed Metal, Patterned, Gloss
.052“
Laser, Rotary
.003” (.08mm)
24” x 48 3/4”
CHARACTERISTICS: Material Specifications:
30
INTERIOR SIGNAGE, PERSONAL IDENTIFICATION & AWARDSROWMARK LASERMARK®
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
INTERIOR SIGNAGE, EXTERIOR SIGNAGE &PERSONAL IDENTIFICATIONROWMARK REVERSE LASERMARK®
31
• Indoor• Scores• Saws• Drills• Shears• Bevels• Laser Vector Cuts• Heat Bendable• Screen Prints
• Hot Stamps• Bonds• Permits Detailed Engraving• Backfills• Backlights
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced Impact Acrylic for Reverse Engraving
Matte Non-Glare
.052“, .125”
Laser, Rotary
.003” (.08mm)
24” x 48 3/4”
CHARACTERISTICS:Material Specifications:
922-511Matte/Blue
922-340Gloss/Smooth Silver
922-341Matte/Smooth Silver
922-401Matte/Black
922-221Matte/Ivory
322-101Matte/Clear
422-100Clear/Clear
922-201Matte/White
922-931Matte/Bright Green
922-710Gloss/Smooth Gold
922-711Matte/Smooth Gold
922-841Matte/Dark Brown
922-701Matte/Yellow
922-551Matte/Navy Blue
922-601Matte/Red
922-621Matte/Burgundy
SURFACE CORE
COLOR 2 PLY
1/8”1/16”
Rowmark Reverse LaserMark
ClearClearWhiteIvorySmooth SilverSmooth SilverBlackBlueNavy BlueRedBurgundyYellowSmooth GoldSmooth GoldDark BrownBright Green
322-101422-100922-201922-221922-340922-341922-401922-511922-551922-601922-621922-701922-710922-711922-841922-931
342-101422-100
942-340942-341
942-710942-711
MatteClearMatteMatteGlossMatteMatteMatteMatteMatteMatteMatteGlossMatteMatteMatte
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
• Outdoor• Indoor• Scores• Saws• Drills• Shears• Laser Vector Cuts• Heat Bendable• Permits Detailed Engraving
• Bevels• Screen Prints• Hot Stamps• Bonds• UV Stable
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Modified Impact Acrylic
Brushed
1/32”, 1/16”, 1/8“
Laser, Rotary
.003” (.08mm)
24” x 48”
CHARACTERISTICS: Material Specifications:
32
INTERIOR, EXTERIOR, SAFETY & TACTILE SIGNAGEROWMARK LASERGLOW®
INTERIOR & EXTERIOR SIGNAGE, IDENTIFICATIONROWMARK METALGRAPH PLUS®
• Indoor• Saws• Drills• Bevels• Screen Prints• Hot Stamps• Laser Vector Cuts• Heat Bendable• MEA certified MEA# 203-08-M
• Braille Engravable• Bonds• UV Stable• Back-Lighting• Back-Filling• Embosses• Ink Prints• Thermal Prints
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced Impact Acrylic
Matte Non-Glare
1/32”, 1/16”, 1/8“
Laser, Rotary
.022” (.56mm) *.025” (.64mm)
24” x 48 3/4”
CHARACTERISTICS: Material Specifications:
LG302-911Glowwith Adhesive
LG311-911GlowADA Compliant
LG322-911GlowReverse
LG322-919Glow/Safety Green
LG322-914Glow/Safety Black
LG322-915Glow/Safety Blue
LG322-916Glow/Safety Red
SURFACE CORE
COLOR 1 PLY
1/16”1/32” 1/8”
Rowmark Laserglow
1 Ply1 Ply1 Ply
LG311-911 LG341-911LG302-911LG32-911LG322-911
Glow - w/ AdhesiveGlow - ADA-compliantGlow - Reverse
SURFACE CORE
COLOR 2 PLY
1/16”Black*Blue*Red*Green*
LG322-914*LG322-915*LG322-916*LG322-919*
GlowGlowGlowGlow* For best results, Rowmark recommends to rotary engrave these select products.
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
MP922-864Br Copper Penny/Black
MP922-764Br Antique Gold/Black
MP922-765Br Antique Gold/Blue
MP922-766Br Antique Gold/Red
MP922-364Br Bright Nickel/Black
MP922-314Br Stainless Steel/Black
MP922-315Br Stainless Steel/Blue
MP922-316Br Stainless Steel/Red
SURFACE CORE
COLOR 2 PLY
1/16”1/32”
Rowmark Metalgraph Plus
BlackBlueRedBlackBlackBlueRedBlack
MP912-314MP912-315MP912-316MP912-364MP912-764MP912-765MP912-766MP912-864
MP922-314MP922-315MP922-316MP922-364MP922-764MP922-765MP922-766MP922-864
1/8”MP942-314MP942-315MP942-316MP942-364MP942-764MP942-765MP942-766MP942-864
Brushed Stainless SteelBrushed Stainless SteelBrushed Stainless SteelBrushed Bright NickelBrushed Antique GoldBrushed Antique GoldBrushed Antique GoldBrushed Copper Penny
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
INTERIOR & EXTERIOR TACTILE SIGNAGE
SURFACE
COLOR
1/32” W/ ADH1/32” 1/8”1/16”
1 PLY APPLIQUÉ 1 PLY SUBSTRATERowmark ADA Alternative
311-201V311-204V311-214311-218311-301311-302311-304311-305311-306311-307311-308311-398311-401V311-413311-501311-502311-504311-507311-509311-595311-601311-602311-661311-671311-701311-771311-801311-802311-803311-808311-811311-823311-831311-891311-901311-902311-903311-905311-921
311-201AV311-204AV311-214A311-218A311-301A311-302A311-304A311-305A311-306A311-307A311-308A311-398A311-401AV311-413A311-501A311-502A311-504A311-507A311-509A311-595A311-601A311-602A311-661A311-671A311-701A311-771A311-801A311-802A311-803A311-808A311-811A311-823A311-831A311-891A311-901A311-902A311-903A311-905A311-921A
321-201V321-204V321-214321-218321-301321-302321-304321-305321-306321-307321-308321-398321-401V321-413321-501321-502321-504321-507321-509321-595321-601321-602321-661321-671321-701321-771321-801321-802321-803321-808321-811321-823321-831321-891321-901321-902321-903321-905321-921
341-201341-204341-214341-218341-301341-302341-304341-305341-306341-307341-308341-398341-401341-413341-501341-502341-504341-507341-509341-595341-601341-602341-661341-671341-701341-771341-801341-802341-803341-808341-811341-823341-831341-891341-901341-902341-903341-905341-921
ROWMARK ADA ALTERNATIVE®
WhiteBright WhiteAshSandalwoodGreyChina BlueSilverLight GreyPearl GreyCharcoal GreySilver GreyGraphiteBlackCinderBlueMarine BlueAir Force BlueMaui BlueBahama BlueDriftwoodRedBurgundyPassion PinkBordeauxYellowGoldAntique IvoryTaupeDark BrownSandParchmentCanyonBeigeCopperBright GreenPine GreenBlack Forest GreenGrass GreenTeal
311-201VWhite
311-204VBright White
311-214Ash
311-808Sand
311-218Sandalwood
311-301Grey
311-302China Blue
311-304Silver
311-305Light Grey
311-306Pearl Grey
311-307Charcoal Grey
311-308Silver Grey
311-501Blue
311-502Marine Blue
311-504Air Force Blue
311-507Maui Blue
311-509Bahama Blue
311-595Driftwood
311-601Red
311-602Burgundy
311-661Passion Pink
311-671Bordeaux
311-701Yellow
311-771Gold
311-802Taupe
311-823Canyon
311-831Beige
33
• Indoor• Scores• Saws• Drills• Bevels• Bonds
• Laser Vector Cuts• Heat Bendable• Screen Prints• Hot Stamps• Braille Engravable
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Single-Ply Modified Acrylic
Matte Non-Glare
1/32”, 1/16”, 1/8“
Laser, Rotary
1/4” round .020 tip @ 20-25º angle
24” x 48 3/4”
CHARACTERISTICS:Material Specifications:
311-801Antique Ivory
311-803Dark Brown
311-811Parchment
311-891Copper
311-902Pine Green
311-903Black Forest Green
311-901Bright Green
311-905Grass Green
311-921Teal
311-413Cinder
311-398Graphite
311-401Black
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
• Outdoor• Indoor• Scores• Shears• Laser Vector Cuts• Thermal Prints
• Ink Prints• UV Stable• Permits Detailed Engraving• Sandblasts
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced Flexible Magnetic Material
Brushed or Gloss
.020“
Laser
.001” (.025mm)
12“ x 24”
CHARACTERISTICS: Material Specifications:
• Outdoor• Indoor• Scores• Drills• Shears• Ink Prints• Permits Detailed Engraving
• Bonds• UV Stable• Embosses• Sandblasts• Laser Vector Cuts• Thermal Prints
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced Pre-Adhesive Acrylic
Brushed or Gloss
.004“ with Pre-applied Adhesive
Laser or Rotary
.002” (.051 mm)
12” x 24”
CHARACTERISTICS: Material Specifications:
34
PERSONAL IDENTIFICATION, INDUSTRIAL APPLICATIONS
ROWMARK LASERLIGHTS
S69-1224Brushed Bronze/Black
S64-1224Brushed Brass/Black
S65-1224Black/Gold
S68-1224Yellow/Black
S63-1224Brushed Silver/Black
S26-1224White/Gold
S61-1224Black/White
S62-1224White/Black
SURFACE / CORE
COLOR 2 PLY
LENGTHWIDTH
Rowmark Laserlights
White / GoldBlack / WhiteWhite / BlackBrushed Silver / BlackBrushed Brass / BlackBlack / GoldYellow / BlackBrushed Bronze / BlackSmooth Silver / BlackSmooth Gold / BlackBlack / Silver
12”12”12”12”12”12”12”12”12”12”12”
24”24”24”24”24”24”24”24”24”24”24”
S26-1224S61-1224S62-1224S63-1224S64-1224*S65-1224S68-1224S69-1224S73-1224S74-1224*S75-1224
S73-1224Smooth Silver/Black
S74-1224Smooth Gold/Black
S75-1224Black/Silver
* Not recommended for outdoor applications.
LM63-1224Brushed Silver/Black
LM64-1224Brushed Gold/Black
LM65-1224Black/Gold
SURFACE / CORE
COLOR 2 PLY
LENGTHWIDTH
Rowmark Lasermag
Brushed Silver / BlackBrushed Gold / BlackBlack / Gold
12”12”12”
24”24”24”
LM63-1224LM64-1224*LM65-1224* Not recommended for outdoor applications.
PROMOTIONAL MAGNETS & NAMEPLATESROWMARK LASERMAG
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
INTERIOR & EXTERIOR SIGNAGE
SURFACE CORE
COLOR
1/16”
2 PLY 3 PLY
1/8”
Rowmark Lacquers
BlackBlueRedDk BrownBlackWhiteYellowGoldWhiteYellowWhiteWhiteWhiteYellowBlackBlackBlackBlackWhiteWhiteWhite
422-204422-205422-206422-228422-384422-402422-407422-417422-512422-517422-542422-562422-602422-607422-704422-774422-794422-814422-842422-932422-962
442-204442-205442-206442-228442-384442-402442-407442-417442-512442-517442-542442-562442-602442-607442-704442-774442-794442-814442-842442-932442-962
1/8”443-204443-205443-206443-228443-384443-402443-407443-417443-512443-517443-542443-562443-602443-607443-704443-774443-794443-814443-842443-932443-962
ROWMARK LACQUERS
WhiteWhiteWhiteIvoryVintage SilverBlackBlackBlackBlueBlueBlueberrySapphireRedRedYellowVintage GoldSafety YellowParchmentDark BrownBright GreenTeal
SURFACE CORE
COLOR
1/16”
2 PLY
1/8”
Rowmark Slickers
ClearWhiteIvoryBlackBlueBlueberrySapphireRedYellow
422-100422-200422-230422-400422-510422-540422-560422-600422-700
442-100442-200
442-400
ClearClearClearClearClearClearClearClearClear
422-204White/Black
422-205White/Blue
422-206White/Red
422-407Black/Yellow
422-417Black/Gold
422-512Blue/White
422-517Blue/Yellow
422-542Blueberry/White
422-562Sapphire/White
422-602Red/White
422-607Red/Yellow
422-704Yellow/Black
422-228Ivory/Dark Brown
422-384Vintage Silver/Black
422-402Black/White
422-774Vintage Gold/Black
422-794Safety Yellow/Black
422-814Parchment/Black
422-842Dark Brown/White
422-932Bright Green/White
422-962Teal/White
35
• Outdoor• Indoor• Saws• Drills• Bevels• UL approved for component products -yellowcard E534751.
• Heat Bendable• Screen Prints• Hot Stamps• Bonds• UV Stable
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Laminated Impact Acrylic
Glossy
1/16”, 1/8“
Rotary
.012” (.3mm)
24” x 48 3/4”
CHARACTERISTICS:Material Specifications:
• Outdoor• Indoor• Saws• Drills• Bevels• Backfills• UL approved for component products -yellowcard E534751.
• Heat Bendable• Screen Prints• Hot Stamps• Bonds• UV Stable• Backlights
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Laminated Impact Acrylic for Reverse Engraving
Glossy
1/16”, 1/8“
Rotary
.012” (.3mm)
24” x 48 3/4”
CHARACTERISTICS:Material Specifications:
INTERIOR & EXTERIOR SIGNAGEROWMARK SLICKERS
422-200Clear/White
422-230Clear/Ivory
422-400Clear/Black
422-540Clear/Blueberry
422-100Clear/Clear
422-510Clear/Blue
422-700Clear/Yellow
422-560Clear/Sapphire
422-600Clear/Red
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Representative for current availability.
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Representative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
INTERIOR SIGNAGE & IDENTIFICATION
SURFACE
COLOR
1/8”CORE
2 PLY 3 PLYRowmark Safe-T-Mark
BlackWhiteBlackWhiteWhiteWhiteBlackBlackWhite
FR242-204FR242-312FR242-314FR242-402FR242-512FR242-602FR242-624FR242-744FR242-932
1/16”FR223-204FR223-312FR223-314FR223-402FR223-512FR223-602FR223-624FR223-744FR223-932
1/8”FR243-204FR243-312FR243-314FR243-402FR243-512FR243-602FR243-624FR243-744FR243-932
1/16”FR222-204FR222-312FR222-314FR222-402FR222-512FR222-602FR222-624FR222-744FR222-932
• Indoor• Scores• Saws• Drills• Bevels• Bonds
• Hot Stamps• Thermal Prints• Heat Bendable• Screen Prints• Permits Detailed Engraving
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Fire retardant functional polymer
Matte Non-Glare
1/16“, 1/8”
Rotary
.003” (.08mm)
24” x 48 3/4”
CHARACTERISTICS: Material Specifications:
• Indoor• Scores• Saws• Drills• Shears• Bevels
• Heat Bendable• Screen Prints• Hot Stamps• Bonds• Permits Detailed
Engraving
Material
Finish
Thickness
Engraving Methods
Engraving Depth
Std. Sheet Size
Microsurfaced ABS
Brushed Metal w/ Hardcoat / Shiny Metal
1/16“, 1/8“
Rotary
.003” (.08mm)
24” x 49”
CHARACTERISTICS: Material Specifications:
36
ROWMARK NOMARK® PLUS
WhiteGreyGreyBlackBlueRedOrangeYellowBright Green
INDUSTRIAL TAGS, ELECTIRCAL TAGS & CONTROL PANELSROWMARK SAFE-T-MARK™
FR222-744Yellow/Black
FR222-512Blue/White
FR222-602Red/White
FR222-624Orange/Black
FR222-402Black/White
FR222-204White/Black
FR222-312Grey/White
FR222-314Grey/Black
FR222-932Bright Green/White
Avoid the handling and fabrication frustration of traditional phenolic sheet materials. Electrically non-conductive, Insulative, Fire retardant, Non-flammable. Meets 10ˆ12 Ohms/square meter or higher in electrical resistiv-ity, UL 94 V0, RoHS compliant (halogen-free), PVC-free, Formaldehyde and Phenol free.
SURFACE CORE
COLOR
1/16”
2 PLY
1/8”
Rowmark NoMark Plus
BlackBlackBlackBlackBlackBlackBlackBlack
522-3340+522-3440+522-3540+522-7140+522-7340+522-7540+522-8840+522-8940+
542-3340+542-3440+542-3540+542-7140+542-7340+542-7540+542-8840+542-8940+
Brushed SilverSmooth SilverBrushed AluminumSmooth GoldBrushed GoldEuropean Gold * Deep BronzeBrushed Copper
522-3340+Brushed Silver/Black
522-3440+Smooth Silver/Black
522-3540+Brushed Alum/Black
522-8940+Brushed Copper/Black
522-7140+Smooth Gold/Black
522-7340+Brushed Gold/Black
522-7540+European Gold/Black*
522-8840+Deep Bronze/Black
* Not recommended for harsh or high humidity indoor or outdoor.
Not all Rowmark products are stocked in all warehouse locations. Please contact your Account Executive or Customer Service Represen-tative for current availability.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
37
ADDITIONAL ROWMARK PRODUCTS
COLORCAST ACRYLICS™Your signage will really stand out with the new ColorCast Acrylics. They are harder and clearer than extruded acrylics, and they allow you to perform fine, detailed laser and rotary engraving.
COLORHUES™ColorHues provide the benefits of glass in a lightweight, scratch resistant material. ColorHues is a single-ply decorative sheet material with brilliant shades of color offered in 25 popular translucent and opaque hues.
DIGIMARK™ OSiIn response to recent technological advancements in the small format digital printing market, Rowmark announces DigiMark OSi™ print receptive, engravable acrylic sheet material featuring “Optical Surface imaging (OSi)” technology.
FUSIONGRAFIX™A designer inspired new product that puts the engraver in complete control with the freedom to combine graphic patterns over color capped durable acrylic cores to create distinctive designs. FusionGrafix interior and exterior grade 2-ply sheets are available in 1/16” thickness in a semi-gloss finish.
HARDWOOD COLLECTIONNEW!
NEW!
NEW!
A line of all natural, quality constructed laserable wood substrates to meet a wide variety of application needs, from architectural, craft and artistry projects to awards and recognition pieces, custom gifts and promotional products. Available in 1/8” and 1/4” thicknesses and 12”x24” or 18”x24” sheets sizes.
THE VARSITY COLLECTIONShow your school spirit with the Varsity Collection of school colors available from Rowmark! Laser and Rotary engravable, UV stable, these products are perfect for school badges, stadium and locker room signage, or anywhere your local high schools, colleges and universities want to show their school spirit!
HEAVY WEIGHTS™Like a world champion, Heavy Weights goes the distance against the harshest elements. This heavy-gauge 3-ply polymer sheet is perfect for exterior signage where weather is a factor.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
Choose this method for enhancingyour name badges when you:
• have complex, multi-coloredart to reproduce.
• need a small quantity.• require a quick turnaround.
DIGITAL PRINTING
Choose this method for enhancingyour name badges when you:
• want a PMS color match.• need a large quantity.• Have a detailed logo or
graphic to reproduce.
SILK SCREENING
Choose this method for enhancingyour name badges when you:
• want a metallic color.• need a small quantity.• Have simple type or
graphic to reproduce.
HOT STAMPING
40
VARIABLES TO CONSIDERPRINTING & HOT STAMPING
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
Table Shear
3-In-1 Maxi Press
Corner Rounder
Heavy-Duty Corner Rounder
Brass / Aluminum CutterPlastic / Flexible Engraving Stock CutterUpper Replacement BladeLower Replacement Blade
SM96SM95
SM95-96UBSM95-86LB
Description Part No.TABLE SHEAR
Metal or plastic shear designed to cut material 12” wide by any length. SM96 cuts brass up to .025 thickness, and aluminum up to .040. SM95 shears flexible engraving stock up to .125 thickness.
Rounder (cutting unit not included)Replacement Table TopHeavy-Duty Rounder (cutting unit not included)
SM90SM90T
SM91
Description Part No.CORNER ROUNDERS
Upper and lower knives cut engraving material uniformly to produce sharp, crisp rounded corners on your signs. Excellent results on 1/32, 1/16, and 3/32 inch flexible engraving stock. The heavy-duty unit features an improved table and better handle leverage.
1/8” Radius Cutting Unit1/4” Radius Cutting Unit5/16” Radius Cutting Unit3/8” Radius Cutting Unit1/2” Radius Cutting Unit
CDACDBCDECDDCDC
Description Part No.CUTTING UNITS
Use with SM90 or SM91 Corner Rounders.
Name Plate Punch & Die Cutter EN31Description Part No.3-in-1 Maxi-Press
Optimum performance and versatility for hole punching, notching and rounding perpetual name plates. Hardened and ground punch and die components. Fast, and easy to add beauty and styling to square or rectangular name plates with clean, burr-free cuts.
FOR DO-IT-YOURSELF FABRICATIONFABRICATION EQUIPMENT
418 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
Military Name BadgesUSAF BadgesMilitary Badges
Image Maker Badge FramesAluminum Badge FramesPlastic Badge Frames
Identifier Badge FramesRadius Corner FramesSquare Corner FramesOval FramesMetal Badge Frames
Gripper Tag® Magnets
Findings
Liquid Adhesives & Accessories
Ready-Made Badges & Frames1/16 Ready-Made3/32 Ready-MadeSeries 58 Badge FramesSeries 15 Badge FramesSeries 19 Badge Frames
Metal Name Badges 444546
48-49
52
53
54-56
56
47
How to Engrave Metal Badges
Image Maker Lenses & Inserts 50-51
42
METAL, PLASTIC, INSERTS & LENSESBADGES, FRAMES & FINDINGS
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
THE QUALITY YOU DEMAND FROM THE NAME YOU TRUST.HIGH QUALITY NAME BADGES
43
At Able Engravers, we offer the absolute highest quality metal badges available anywhere. Our badges are worn by some of the finest public servants in the world. Police departments, fire departments, security agencies and EMS personnel from all over the world rely on Able quality and service to identify service members every day. You too can have the exact same quality badges that these and other organizations around the world enjoy for your team members.
We offer a variety of sizes and finishes to suit any application. Quality doesn’t mean expensive either. No matter the need, we have the badge for you. Call your customer service representative today and ask how Able can solve you badge needs.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
Bright GoldSatin GoldBright SilverSatin SilverChrome Plated
MBG38CMSG38CMBS38CMSS38CMCP38C
MBG38PMSG38PMBS38PMSS38PMCP38P
MBG38CBMSG38CBMBS38CBMSS38CBMCP38CB
FINISH / COLOR3/8” X 2 1/4”
CLUTCH PIN BACK BLANKMetal Name Badges
Bright GoldBright Silver
MSBGMSBS
FINISH / COLOR PART NUMBERService Bars
Bright GoldSatin GoldBright SilverSatin SilverChrome Plated
MBG12CMSG12CMBS12CMSS12CMCP12C
MBG12PMSG12PMBS12PMSS12PMCP12C
MBG12CBMSG12CBMBS12CBMSS12CBMCP12CB
1/2” X 2 3/8”
Bright GoldSatin GoldBright SilverSatin SilverChrome Plated
MBG58CMSG58CMBS58CMSS58CMCP58C
MBG58PMSG58PMBS58PMSS58PMCP58P
MBG58CBMSG58CBMBS58CBMSS58CBMCP58CB
5/8” X 2 1/2”
Bright GoldSatin GoldBright SilverSatin SilverChrome Plated
MBG34CMSG34CMBS34CMSS34CMCP34C
MBG34PMSG34PMBS34PMSS34PMCP34P
MBG34CBMSG34CBMBS34CBMSS34CBMCP34CB
3/4” X 3” *
Service Bars can only be paint filled, not oxidized.
ENOXSBENOXSQB
4 oz.32 oz.
STOCK NUMBER SIZEBrass Oxidation Solution
This solution produces permanent blackened letters on engraved brass, nickel silver,and chrome plated brass.
Bright GoldSatin GoldBright SilverSatin SilverChrome PlatedYou may specify Service Bar spacing on our clutch backed metal badges byadding “S” to the end of the stock number.
* No service bar spacing available on 3/4” x 3” or 1” x 3” badges.
MBG1CMSG1CMBS1CMSS1CMCP1C
MBG1PMSG1PMBS1PMSS1PMCP1P
MBG1CBMSG1CBMBS1CBMSS1CBMCP1CB
1” X 3” *
44
SERVICE BARS & OXIDATION SOLUTIONMETAL NAME BADGES
3/8” x 2 1/4” Satin Gold
1/2” x 2 3/8” Bright Gold
5/8” x 2 1/2” Satin Silver
3/4” x 3” Bright Silver
1“ x 3” Chrome Plated
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
ENGRAVING & PAINT FILLINGHOW TO ENGRAVE METAL BADGES
45
MOUNTSecure metal badge in fixture. Apply a piece of Scotch Tape over the metal badge without removing the paper mask that comes on the product. The Scotch Tape will keep the paper mask from balling up as you work and aid in removing the paper after engraving. An oversize nose cone may replace the need for Scotch Tape.
ADJUST DEPTHIn order to easily paint fill, you will need to engrave your badges to a depth of .012. This may or may not be accom-plished in one pass, depending on whether you are engrav-ing leaded brass, 70/30 brass or nickel silver. If the letters seem rough when you run your finger across the surface of the badge, a second pass is needed. Simply lower your cutter .001 and run again.
DUST OFFIf you have an air hose, blow off the badges prior to removing the mask, and again after you remove the masking. This will help eliminate any scratches to the badge surface. Next, fill the letters with an enamel paint such as Testor. You don’t have to be neat, just make sure the letters are completely filled.
REMOVE EXCESSTake a squeegee and remove the excess paint and set the badges aside to dry. If possible, allow product to dry overnight, this will make cleaning easier without removing any paint from inside the lettering.
FINISHING UPPut odorless mineral spirits on a lint-free paper towel and lay it on a flat surface. Simply buff the badge, face down, across the paper towel until the remaining paint on the badge has been removed. You can polish any residue from the mineral spirits with a clean lint-free paper towel.
OTHER ENGRAVING METHODS• Burnishing• Diamond Drag
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
USAF 3/4” x 3” Bright Silver
USAF Clutch Fastener
1“ x 3”Satin Black/White
5/8“ x 3 3/16”Satin Blue/White
1“ x 3”Textured Black/White
5/8” x 3”Matte Black/White
3/4“ x 3”Satin Black/White
Satin GoldBright GoldSatin SilverBright Silver
MSGAFCMBGAFCMSSAFCMBSAFC
ClutchClutchClutchClutch
FINISH/COLOR3/4” x 3”
PART NO. FASTENERUSAF Badges Metal
Satin Black/WhiteTextured Black/White
TM2101CTM6326021C
ArmyMilitary/Army (Pebble Finish)
TM2103C Navy
FINISH/COLOR1” x 3”
PART NO. BRANCHMilitary Badges Plastic 3/32”
Satin Black/White3/4” x 3”
MC210C MarineMatte Black/White5/8” x 3”
AF223C Air ForceSatin Blue/White5/8” x 3 3/16”
46
USAF & MILITARY BADGESMILITARY NAME BADGES
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
Acetate Backed Pinback and DoublePost Bar with Clutches
Heat Fused Findings
Series 58 Bright Rose Gold
Series 15 Bright Rose Gold
Series 19 Bright Rose Gold
Bright Rose GoldBright Rose GoldBright Rose GoldBright SilverBright Silver
5/8” x 2 5/8”5/8” x 2 5/8”5/8” x 2 5/8”5/8” x 2 5/8”5/8” x 2 5/8”
PinbackClutch BackNonePinbackNone
MFG58PMFG58CMFG58BMFS58PMFS58B
COLOR INSERT SIZE FASTENER PART NO.Series 58 Badge Frames Aluminum Frame, 1/8” Radius Corner
3/4” x 3”3/4” x 3”1” x 3”1” x 3”
PinbackDouble Post BarPinbackDouble Post Bar
ENTFP(+ color #)ENTFC(+ color #)ENTEP(+ color #)ENTEC(+ color #)
TAG SIZE FASTENER PART NO.1/16” Plastic: Acetate Backed Findings
Black/WhiteBlack/WhiteWhite/BlackWhite/BlackWhite/BlueWhite/BlueRed/WhiteRed/WhiteAzure Blue/WhiteAzure Blue/White
3/4” x 3”1” x 3”3/4” x 3”1” x 3”3/4” x 3”1” x 3”3/4” x 3”1” x 3”3/4” x 3”1” x 3”
TM2103CTM2101CTM2003CTM2001CTM2033CTM2031CTM2483CTM2481CTM2263CTM2261C
COLOR/CORE SIZE PART NO.3/32” Plastic: Heat Fused Findings (satin finish)
Bright Rose GoldBright Rose GoldBright Rose GoldBright SilverBright Silver
15/16” x 2 15/16”15/16” x 2 15/16”15/16” x 2 15/16”15/16” x 2 15/16”15/16” x 2 15/16”
PinbackClutch BackNonePinbackNone
MFG15PMFG15CMFG15BMFS15PMFS15B
COLOR INSERT SIZE FASTENER PART NO.Series 15 Badge Frames Aluminum Frame, 1/8” Radius Corner
Bright Rose GoldBright Rose GoldBright Rose GoldBright SilverBright Silver
1 7/16” x 2 3/4“1 7/16” x 2 3/4“1 7/16” x 2 3/4“1 7/16” x 2 3/4“1 7/16” x 2 3/4“
PinbackClutch BackNonePinbackNone
MFG19PMFG19CMFG19BMFS19PMFS19B
COLOR INSERT SIZE FASTENER PART NO.Series 19 Badge Frames Aluminum Frame, 1/8” Radius Corner
PLASTIC w/ FINDINGS & BADGE FRAMESREADY-MADE BADGE FRAMES
478 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
Bright Yellow GoldBright Silver
.620” x 2.62”
.620” x 2.62”NoneNone
IM58BYGBIM58BSB
COLOR INSERT SIZE FASTENER PART NO.
Image Maker Aluminum Badge Frames
Bright Yellow GoldBright SilverBright Yellow Gold
.937” x 2.937”
.937” x 2.937”
.937” x 2.937”
NoneNonePinback
IM15BYGBIM15BSBIM15BYGP
with 1/8” Radius Corners
Ideal for 1/32”, & 1/16” Plastic, Alumamark, AwardMark, and Sublimation Aluminum
Ideal for 1/32”, & 1/16” Plastic, Alumamark, AwardMark, and Sublimation Aluminum
Bright Yellow GoldBright Silver
1.346” x 2.746“1.346” x 2.746“
NoneNone
IM19BYGBIM19BSB
Ideal for 1/32”, & 1/16” Plastic, Alumamark, AwardMark, and Sublimation Aluminum
COLOR INSERT SIZE FASTENER PART NO.
Image Maker Plastic Badge Frames
Bright Yellow GoldBright SilverMatte Black
1” x 3”1” x 3”1” x 3”
NoneNoneNone
IM13BYGBIM13BSBIM13MBB
with 1/8” Radius Corners
Ideal for 1/32”, & 1/16” Plastic, Alumamark, AwardMark, and Sublimation Aluminum
Bright Yellow GoldBright SilverMatte Black
1.5” x 3”1.5” x 3”1.5” x 3”
NoneNoneNone
IM253BYGBIM253BSBIM253MBB
2” x 3”2” x 3”2” x 3”
NoneNoneNone
IM32BYGBIM32BSBIM32MBB
Ideal for 1/32”, & 1/16” Plastic, Alumamark, AwardMark, and Sublimation Aluminum
Bright Yellow GoldBright SilverMatte BlackIdeal for 1/32”, & 1/16” Plastic, Alumamark, AwardMark, and Sublimation Aluminum
Bright Yellow GoldBright SilverMatte Black
2.125” x 3.375”2.125” x 3.375”2.125” x 3.375”
NoneNoneNone
IM21BYGBIM21BSBIM21MBB
Ideal for 1/32”, & 1/16” Plastic, Alumamark, AwardMark, and Sublimation Aluminum
Bright Yellow GoldBright SilverMatte Black
1.5” x 2.385” Oval1.5” x 2.385” Oval1.5” x 2.385” Oval
NoneNoneNone
IM0BYGBIM0BSBIM0MBB
Ideal for 1/32”, & 1/16” Plastic, Alumamark, AwardMark, and Sublimation Aluminum
48
ALUMINUM & PLASTIC RADIUS CORNERSIMAGE MAKER BADGE FRAMES
BEST VALUE IN BADGE FRAMES!
IM58 Bright Silver
IM19 Bright Silver
IM21 Bright Silver
IM15 Bright Yellow Gold
IM13 Bright Yellow Gold
IM253 Bright Yellow Gold
IM0 Bright Yellow Gold
<< IM0MBB Matte Black
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
ALUMINUM & PLASTIC RADIUS CORNERSIMAGE MAKER BADGE FRAMES
49
Image Maker IM0BYGB (p.48)Insert BUFLEX07 (p.7)Laser Engraved
Image Maker IM19BSB (p.48)Insert AL8002 (p.58)
Sublimated
Image Maker IM80BG153 (p.49)Insert Rowmark 602-677 (p.29)Frame information above
>>
<<
>>
COLOR INSERT SIZE PART NO.
Image Maker Picture Frames
Bright GoldBright SilverBright GoldBright Silver
3/4” x 2 3/4”3/4” x 2 3/4”1 1/4” x 2 3/4” 1 1/4” x 2 3/4”
FRAME SIZEIM70BG13IM70BS13IM80BG153IM80BS153
1” x 3”1” x 3”1 1/2” x 3” 1 1/2” x 3”
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
50
ALUMINUM & PLASTIC RADIUS CORNERSIMAGE MAKER CLEAR LENSES
Great looking badges are as easy as 1... 2... 3.
Snap Into Lens Apply FindingPrepare Insert
1. 2. 3.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
IM20LENS
IM15LENS
IM13LENS
IM30LENS
IM45LENS
CLEAR PLASTIC LENSES & INSERTSIMAGE MAKER CLEAR LENSES
51
* For use with .020, .030 and .040 metals.** For use with .060 engraving stock.
Clear Lens 1” x 3”Clear Lens 1.5” x 2.75”Clear Lens 1” x 3”Clear Lens 1.5” x 3”Clear Lens 1.5” x 3”
IM13LENS*IM15LENS*IM20LENS**IM30LENS*IM45LENS**
DESCRIPTION.020 to .032 Metal.020 to .032 Metal.062 Plastic.020 to .032 Metal.062 Plastic
INSERT PART NO.Clear Plastic Lenses
* Order Quantities less than 1000 pieces require set-up charge.CAUTION: Use sliding motion when removing magnets, as pulling them off could result in the insert beingpulled from its lens.
.030 Unisub White Aluminum
.025 Gold Sublimation Aluminum
.025 Silver Sublimation Aluminum
.020 Bright Gold Brass
.032 satin Gold Brass
.016 Laser Black Steel
.020 Dynasub Gold
.020 Dynasub Silver
.020 Dynasub White
.025 White Aluminum
.020 AlumaMark - Any Color
IM13CL5570IM13AL8001IM13AL8002IM13C2001IM13C3003IM13C1021IM13DS1128IM13DS1129IM13DS1134IM13WHITEIM13AM020*
DESCRIPTION PART NO.IM13 Inserts Only
* Order Quantities less than 1000 pieces require set-up charge.CAUTION: Use sliding motion when removing magnets, as pulling them off could result in the insert beingpulled from its lens.
.030 Unisub White Aluminum
.025 Gold Sublimation Aluminum
.025 Silver Sublimation Aluminum
.020 Bright Gold Brass
.032 satin Gold Brass
.016 Laser Black Steel
.025 White Aluminum
.020 AlumaMark - Any Color
IM15CL5570IM15AL8001IM15AL8002IM15C2001IM15C3003IM15C1021IM15WHITEIM15AM020*
DESCRIPTION PART NO.IM15 Inserts Only
* Order Quantities less than 1000 pieces require set-up charge.CAUTION: Use sliding motion when removing magnets, as pulling them off could result in the insert beingpulled from its lens.
.030 Unisub White Aluminum
.025 Gold Sublimation Aluminum
.025 Silver Sublimation Aluminum
.020 Bright Gold Brass
.032 satin Gold Brass
.016 Laser Black Steel
.025 White Aluminum
.020 AlumaMark - Any Color
IM30CL5570IM30AL8001IM30AL8002IM30C2001IM30C3003IM30C1021IM30WHITEIM30AM020*
DESCRIPTION PART NO.IM30 Inserts Only
Refer to Plastic Fabrication Pricing.IM20/IM45 Inserts (Plastic)
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
52
RADIUS & SQUARE CORNER - PLASTIC & METALIDENTIFIER BADGE FRAMES
MFIDE5420 Black
MFIDE25420 Black
MFIDE33720 Gold
MFIDE76400 Gold
MFIDE36200 Silver
MBFBGC Bright Gold
Identifier Badge Frames - Plasticwith 1/8” Radius Corners
GoldSilverBlack
1.406” x 2.75”1.406” x 2.75”1.406” x 2.75”
NoneNoneNone
MFIDE3720*MFIDE4320*MFIDE5420*
COLOR INSERT SIZE FASTENER PART NO.
* These frames will accept insert with a thickness up to 1/8”
GoldSilverBlack
.812” x 2.812”
.812” x 2.812”
.812” x 2.812”
NoneNoneNone
MFIDE23720MFIDE24320MFIDE25420
COLOR INSERT SIZE FASTENER PART NO.
GoldSilverBlack
.562” x 2.5”
.562” x 2.5”
.562” x 2.5”
NoneNoneNone
MFIDE33720MFIDE34320MFIDE35420
COLOR INSERT SIZE FASTENER PART NO.
GoldSilverBlack
1.125” x 2.187”1.125” x 2.187”1.125” x 2.187”
NoneNoneNone
MFIDE76100MFIDE36200MFIDE46300
COLOR INSERT SIZE FASTENER PART NO.
Identifier Badge Frames - PlasticOval
Bright GoldBright Silver
.5” x 2.5”
.5” x 2.5”NoneNone
MBFBGCMBFBSC
COLOR INSERT SIZE FASTENER PART NO.
Metal Badge Frameswith Square Corners
GoldSilverBlack
.562” x 2.5”
.562” x 2.5”
.562” x 2.5”
NoneNoneNone
MFIDE76400MFIDE36500MFIDE46600
COLOR INSERT SIZE FASTENER PART NO.
Identifier Badge Frames - Plasticwith Square Corners
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
CSMAGCSMAG2
PERSONAL ID FASTENERSMAGNETIC BACKINGS
53
DESCRIPTION PART NO.Magnetic Backings®
Magnetic Backings Fastener (only)Pre-Assembled Gripper TagBlue Parts w/ 3 MagnetsBlack Coated Magnetic w/ WarningSuper Gripper MagnetMagnetic Backings 2000Deluxe Gripper TagMagnetic Backings Round - 5/8” diameter.375” Small Magnetic (only).5” large Magnet (only)
GT40GT40P3GRIPGTOLDGTSGT2000GTDELGTRCSMAGCSMAG2
3GRIP
GTS
GTDEL
GT2000
GTR
GTOLD
Magnet Back
Magnet Face
Magnet Back
Magnet Face
GTRDEL Badge-plate
GT2000 badge-plate is recessed for magnets
Magnet Back
GT40P
Magnet Back
Magnet Face
Badge Plate
GT40
Magnet Back
Magnet Face
Magnet Face
Magnet Back
Magnet Face
Magnet Back
Magnet Face
All adhesivebacks featurean easy-peel liner on the adhesive tape.
<<
Badge-plate part for GTDEL, GTOLD, GTS, and 3GRIP Magnetic Backings shown at right.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
Clear Double Post Bar w/ Clutch BackClear Double Post Bar w/ Adhesive BackSerrated Double Post BarClear Single Post w/ ClutchButterfly Clutches Only
DESCRIPTION PART NO.Clutches & Posts
FAB11FAB11AFAB11SFAB12FAB15
Slip On Pocket ClipClear Plastic Pocket ClipTop Load Flexible Badge Holder 2.25” x 3.5”Badge Holder w/ Clip & Pin 2.25” x 3.5”
FAB18FAB180FAB81FAB83
DESCRIPTION PART NO.Pocket Clips
54
CLUTCHES, POSTS & POCKET CLIPSFINDINGS
FAB15
FAB81
FAB12
FAB11S
ApplicationExample
FAB11
FAB11A
FAB180
Examplewith Badge
FAB18
Example withBadge
FAB83
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
FAB06
FAB76
FAB30
APPLICATIONEXAMPLE
FAB04
FAB10
PINBACKS & ASSORTED CLIPSFINDINGS
55
1.5” Serrated Pinback w/ Adhesive Back1.5” Plastic Safety Pin w/ Adhesive Back1.5” Serrated Pinback1.5” Nickel Plated Pinback1.5” Serrated Pinback w/ Acetate Back1.5” Plastic Safety Pin1.5” Plastic Safety Pin Bottom Loading
FAB05FAB77FAB04FAB10FAB06FAB76FAB76B
DESCRIPTION PART NO.Pinbacks
FAB05
FAB77
FAB25SAPPLICATION
EXAMPLE
FAB25
FAB25A
DESCRIPTION PART NO.Clips
FAB30FAB25FAB25AFAB25S
Badge AdapterSwivel Bulldog Clip w/ Acetate BackSwivel Bulldog Clip w/ Adhesive BackSwivel Bulldog Clip w/ Strap
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
56
ADHESIVES, TAG STRAPS & WOOD EASELSLIQUID ADHESIVES & ACCESSORIES
FAB60
FAB26
Application Example
JSP11N JSP11NA
ENB09
ENBC81
ENBC87
ENB14
Bur-BondInstant AdhesiveBonding CementInstant Adhesive
ENB09ENBC81ENB14ENBC87
DESCRIPTION PART NO.16 fl. oz.1.0 fl. oz.3.2 fl. oz.0.7 fl. oz.
SIZEAdhesives
FAB75
FAB72
FAB73
FAB74
ExampleApplications
Black Plastic BeltTan Leather StrapTan Imitation Leather StrapBlack Plastic LoopMetal Split RingPlastic Suction CupPartition PinPartition Pin w/ Adhesive
FAB75FAB72FAB73FAB74FAB60FAB26JSP11NJSP11NA
DESCRIPTION PART NO.7 1/4”5”6”6” X 3/8“1”1 7/8”1” x 3/4”1” x 3/4”
SIZEAccessories
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
AluminumCoated AluminumSublicoat AluminumDynaSub AluminumVersaMet Aluminum NEW!Sparkle Aluminum NEW!Aluminum Oxidizer Solution
58
AluminumLaserable AluminumExterior AluminumLaser*It AluminumLaserable Classic Marbleized AluminumAnodized Satin Aluminum
59
AluminumAlumaJet™DuraBlack™
60
AluminumAlumaMark™
61
BrassEngravers BrassLeaded BrassLaserable BrassLaserable Classic Marbleized Brass
62
Steel & Nickel SilverNickel SilverLacquered Stainless SteelUnlacquered Stainless SteelPlated Steel
63
Steel & Die-Cut CirclesLaserable SteelFrosted SteelLaser/Sublimation SteelLaserable Classic Marbleized SteelDie-Cut Circles
63
ALUMINUM, BRASS & STEELMETALS
57
Can be lasered
Can be engraved
Can be sublimated
Can be used outdoors
KEY
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
58
ALUMINUM SHEET METALMETALS: ALUMINUM
Bright Gold
Bright Silver
Bright Blue
Bright Red
Satin Gold
Satin Silver
Satin Blue
Satin Red
Opaque Gloss Black
Opaque Maroon
Bright Green
Satin Green
Opaque White
Opaque Royal Blue
Opaque Dark Green
Bright Purple
Opaque Orange
Opaque Yellow
Flat Black
AL4001*
AL4002*
AL4003*
AL4004*
AL4005*
AL4006*
AL4007
AL4008
AL4009
AL4010
AL4011*
AL4012
AL4013
AL4015
AL4016
AL4017*
AL4018
AL4020
AL4021
FINISH/COLORPARTNO.
.025”
.025”
.025”
.025”
.025”
.025”
.025”
.025”
.025”
.025”
.025”
.025”
.025”
.025”
.025”
.025”
.025”
.025”
.025”
GAUGECoated Aluminum Satin Gold (paper mask)
Satin Silver (paper mask)
White Unisub
12” x 24”
12” x 24”
Recommended sublimation settings:Temp~380˚F Time~35 sec Light pressure
Also accommodates sublimation.Recommended sublimation settings:Temp~380˚F Time~35 sec Light pressure
VersaMet is a new, extremely versatile aluminum sheetdesigned specifically for use with flatbed digital printers.
AL8001
AL8002
CL5570
FINISH/COLOR PART NO.
DS1128
DS1129
DS1134
PART NO.
.025”
.025”
.030”
GAUGESublicoat & Unisub Aluminum
Satin Gold
Satin Silver
Opaque White
FINISH/COLOR.020”
.020”
.020”
GAUGEDynasub
12” x 24”
AL6001
AL6002
AL6003
PART NO.Satin Gold
Satin Silver
Opaque White
FINISH/COLOR.020”
.020”
.020”
GAUGE
VersaMet Aluminum
Interior use only. Sheet size is 12” x 24”.
Recommended laser settings:Speed~100 Power~60 (35 watt laser)
Recommended sublimation settings:Temp~380˚F Time~35 sec Medium pressure
NEW!
Recommended laser settings:Speed~100 Power~50-60 (35 watt laser)
*Also accommodates sublimation.Recommended sublimation settings:Temp~380˚F Time~50 sec Medium pressure
Unique sparkled texture finish adds a “spark” to anyproject. (May require an extra laser pass)
12” x 24”
AL7001
AL7002
AL7003
PART NO.Gold Sparkle
Silver Sparkle
Black Sparkle
FINISH/COLOR.020”
.020”
.020”
GAUGE
Sparkle AluminumNEW!
4 oz.
32 oz.
SIZE
This solution produces permanently blackened letterson engraved lacquered aluminum.
ENOXSA
ENOXSQA
STOCK NO.Aluminum Oxidizer
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
LASERABLE ALUMINUMMETALS: ALUMINUM
59
12” x 24”
12” x 24”
Gloss Black
Gloss Black
AL1040
AL1041
FINISH/COLOR
PARTNO.
PARTNO.
LASERSTO
.020
.020
Gold
Silver
GAUGE
LaserAluminum
Recommended laser settings:Speed~100 Power~60 (35 watt laser)
Recommended laser settings:Speed~100 Power~60 (35 watt laser)
Gloss Black AL5095
FINISH/COLOR.040
GAUGEExterior Aluminum
One side will laser to matte silver. The back can be rotary engraved.
12” x 24”
Green Marble
Blue Marble
Maroon Marble
Grey Marble
AL4037
AL4038
AL4039
AL4040
FINISH/COLOR PART NO..020
.020
.020
.020
GAUGE
Laserable ClassicMarbleized Aluminum
A larger marbleized pattern. Lasers to a bright silver finish.
12” x 24”
Satin Gold
Satin Silver
Satin Black
Satin Red
Satin Blue
AL5001
AL5002
AL5003
AL5004
AL5005
FINISH/COLOR PART NO..025
.025
.025
020
020
GAUGEAnodized Satin Aluminum
All anodized aluminum is two sided. Can be conventionally or laser engraved. Not recommended for sublimation.Indoor use only except for Satin Silver AL5002.
Classic Marbleized Pattern
Laser*It Aluminum
FINISH PART NO.GAUGEAL1428AL1429AL1433AL1434
.020
.020
.020
.020
Matte GoldMatte SilverGloss BlackGloss White
ENGRAVES TOBlackBlackWhiteBlack
Designed especially for laser engraving, Laser-It allows to you laser engrave beautiful black images on gold, silver and white aluminum using standard power and speed settings and do not require multiple passes. In addition, we also offer a black aluminum that laser-engraves to white.
12” x 24”
Can be lasered
Can be engraved
Can be sublimated
Can be used outdoors
KEY
Recommended laser settings:Speed~100 Power~60 (35 watt laser)
Recommended laser settings:Speed~100 Power~80 (35 watt laser)
Recommended laser settings:Speed~100 Power~50 (35 watt laser)
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
60
LASERABLE & PRINTABLE ALUMINUMMETALS: ALUMAJET & DURABLACK
AlumaJet™ is REAL 100% aluminum that prints full color photo quality graphics right from your inkjet printer! Why try to simulate a metallic look on your printed materials when you can print directly to AlumaJet using your standard software?
FINISH/ COLOR ADH. QTY. PART NO.SIZEGAUGEAlumaJet Sheets
Printer Type Compatibility
Shipped in case quantity ONLY. Call for current lead times.
18602185501855118530185561855718569185641853318584185851860718562
101010101010101010105510
YesYesYesYesNoYesNoYesYesYesYesYesYes
A4 8.26” x 11.70” 8.5“ x 11” 8.5“ x 11” 8.5“ x 11” 8.5“ x 11” 8.5“ x 11” 8.5“ x 11” 8.5“ x 11” 8.5“ x 11” 8.5“ x 11”A3 11.70 x 16.53”A3 11.70 x 16.53”A4 8.26” x 11.70”
.005
.005
.005
.005
.012
.012
.012
.012
.012
.012
.012
.012
.016
Satin SilverMatte SilverSatin SilverSatin WhiteMatte SilverSatin SilverSatin SilverSatin SilverSatin WhiteSatin GoldSatin GoldSatin SilverBrushed Silver
DuraBlack™DuraBlack™ is CO2 laser markable aluminum for durable, on-demand marking for harsh operating environments. DuraBlack is resistant to sunlight (UV-radiation), abrasion, high-temperatures, salt-spray and chemical exposure. Because of its ability to perform across a range of challenging environments, DuraBlack meets several government, industrial and military specifications including MIL-TD 130N, A-A-50271 (≈MIL-P-514D) and MIL-STD-15024F, Type L.
DuraBlack is the ONLY laser markable metal certified for outdoor usage that does not require a chemical pre-treatment or protective topcoat.
FINISH PART NO.GAUGEDB05972DB05973DB05974DB05975DB05976
.005
.020
.020
.020
.020
Matte BlackMatte BlackMatte BlackMatte BlackMatte Black
SIZE10”x12”10”x12” w/ adhesive12”x20”12”x20” w/ adhesive20”x24”
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
LASERABLE ALUMINUMMETALS: ALUMAMARK
61
Can be lasered
Can be engraved
Can be sublimated
Can be used outdoors
KEY
Satin BrassSatin SilverSatin BrassSatin SilverSatin BrassSatin SilverSatin BrassSatin SilverSatin BrassSatin Silver
DiscDiscName BadgeName BadgeName BadgeName BadgeNotched PlateNotched PlateNotched PlateNotched Plate
COLOR SHAPEAM5940AM5941AM5842AM5943AM5944AM5945AM5946AM5947AM5948AM5949
PART NO.2“ Circle2” Circle1” x 3”1” x 3”1 1/2” x 3”1 1/2” x 3”7/8” x 2 1/2”7/8” x 2 1/2”1” x 2 1/2”1” x 2 1/2”
SIZE.020.020.020.020.020.020.020.020.020.020
GAUGEAlumaMark Blanks
AlumaMark is not recommended for exterior projects unless it is coated with a clear UVinhibiting spray.
FINISH/ COLOR ADH. QTY.AM5260AM5238AM5266AM5267AM5261AM5220AM5248AM5252AM5284AM5285
PART NO.10” x 12”12” x 20”12” x 20”12” x 20”10” x 12”10” x 12”12” x 20”12” x 20”12” x 20”12” x 20”
SIZEGAUGEAlumaMark Sheets
AlumaMark is not recommended for exterior projects unless it is coated with a clear UVinhibiting spray. Five sheets per case. Sold by case quantity only.
5555555555
YesNoNoNoYesYesNoNoNoNo
.005
.020
.020
.020
.005
.005
.020
.020
.020
.020
Satin SilverSatin GoldSatin SilverMatte SilverMatte SilverSatin GoldSatin BronzeSatin BrassMirror SilverMirror Gold
AlumaMark™ is 100% aluminum that yields black graphics when marked with a CO2 laser. It is supplied in a range of finishes. The high resolution and positive black markings make AlumaMark appropriate for the highest quality identification products such as plaques and awards, trophy plates, small format signs and industrial nameplates.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
62
LASER, MARBLEIZED & LEADED BRASSMETALS: BRASS
This solution produces permanently blackened letterson engraved lacquered brass, nickel silver and chromeplated brass.
4 oz.
32 oz.
SIZEENOXSB
ENOXSQB
STOCK NO.Brass Oxidation Solution
Bright Gold
Satin Gold
Gloss Black
Gloss Brown
Gloss Blue
Gloss Red
Gloss Green
Gloss Purple
Flat Black
C2001*
C2002*
C2003
C2004
C2005
C2007
C2008
C2012
C2015
FINISH/COLOR.020
.020
.020
.020
.020
.020
.020
.020
.020
GAUGEBrass
Our premium brass is suitable for diamond or rotary engraving and/or burnishing.Sheet size is 12” x 24”
PARTNO.
* Recommended sublimation settings: Temp~380˚F Time~35 sec Medium pressure
Satin Yellow
Satin Yellow
Bright Yellow
C3002*
C3004
C3005
FINISH/COLOR.020
.050
.050
GAUGELeaded Brass 12” x 24”
Leaded brass is more yellow than our premium brass. Specially formulated for ease in rotary engraving.
PARTNO.
* Recommended sublimation settings: Temp~380˚F Time~35 sec Medium pressure
12” x 24”
Gloss Black C1001
FINISH/COLOR PART NO..016
GAUGELaserable Brass
Specifically designed for laser engraving. Our laserable brass can easily be diamond or rotary engraved. Engraving reveals a bright gold brass finish.
Recommended laser settings:Speed~100 Power~60 (35 watt laser)
12” x 24”
Green Marble
Blue Marble
Maroon Marble
Grey Marble
C1010
C1011
C1012
C1014
FINISH/COLOR PART NO..016
.016
.016
.016
GAUGE
Laserable ClassicMarbleized Brass
A larger marbleized pattern. Lasers to a bright gold finish.
Classic Marbleized Pattern
Recommended laser settings:Speed~100 Power~60 (35 watt laser)
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
LASERABLE & SUBLIMATABLEMETALS: STEEL & NICKEL SILVER
63
Can be lasered
Can be engraved
Can be sublimated
Can be used outdoors
KEY
6 oz. Spray Can
Marking solution for unlacquered stainless steel.
LMM14
DESCRIPTION PART NO.Laser Marking Spray
Bright Silver
Satin Silver
Bright Silver
Satin Silver
C7052
C7053
C7001
C7002
FINISH/COLOR PART NO..018
.018
.050
.050
GAUGENickel Silver 12” x 24”
A solid silver colored product with a lacquer coating on one side. When engraved and oxidized, it creates a black on silver look. Is suitable for sublimation.
Recommended sublimation settings:Temp~380˚F Time~35 sec Medium pressure
12” x 24”
Satin Silver C1060
FINISH/COLOR PART NO..015
GAUGE
LacqueredStainless Steel
Recommended sublimation settings:Temp~380˚F Time~35 sec Medium pressureType 430 Stainless Steel is magnetic
12” x 24”
Satin Silver
Bright Silver
Satin Silver
C1061
C1062
C1063
FINISH/COLOR PART NO..018
.018
.029
GAUGE
UnlacqueredStainless Steel
Recommended laser settings:Speed~100 Power~60 (35 watt laser)Type 430 Stainless Steel is magnetic
Bright Gold
Satin Gold
C1050
C1051
FINISH/COLOR PART NO..015
.015
GAUGEPlated Steel
Brass plating over steel, when engraved reveals silver. Used primarily for sublimation. Is magnetic.
12” x 24”
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
Frosted Gold
Frosted Silver
C1030
C1031
FINISH/COLOR PART NO..015
.018
GAUGELaserFrost
Our frosted steel lasers to a bright silver.
Gloss Black
Opaque Red
Opaque Green
Opaque Blue
C1021
C1022
C1023
C1024
FINISH/COLOR PART NO..015
.015
.015
.015
GAUGELaserable Steel
Our laserable steel is specifically designed to laser engrave to a bright gold.Recommended laser settings:Speed~100 Power~60 (35 watt laser)
12” x 24”
Green Marble
Blue Marble
Maroon Marble
Grey Marble
C1046
C1047
C1048
C1049
FINISH/COLOR PART NO..015
.015
.015
.015
GAUGE
Laser ClassicMarbleized Steel
A larger marbleized pattern. Lasers to a bright gold finish.Recommended laser settings:Speed~100 Power~60 (35 watt laser)
12” x 24”
12” x 24”
Classic Marbleized Pattern
Can be lasered
Can be engraved
Can be sublimated
Can be used outdoors
KEY
C1032
FINISH/COLOR PART NO..015White
GAUGELaserSub
Our laser/sublimation steel lasers to a bright gold.
12” x 24”
64
LASERABLE STEEL & DIE CUT CIRCLESMETALS: STEEL & DIE-CUT CIRCLES
Bright Gold AlumSatin Gold AlumSatin Silver AlumSatin Gold Sublim.Satin Silver Sublim.White Sublim.Bright BrassSatin BrassGloss Black Brass
FINISH/MATERIAL
KA154001KA154005KA154006KA158001KA158002KA155570KB152001KB152002KB152003
1.5”PART NO.
KA14001KA14005KA14006KA18001KA18002KA15570KB12001KB12002KB12003
1”PART NO.
KA24001KA24005KA24006KA28001KA28002KA25570KB22001KB22002KB22003
2’’PART NO.GAUGE
DIE CUT CIRCLES
All circles require a minimum order of 100 pieces and a $12.50 set up charge.CAN BE SUBLIMATED
.025
.025
.025
.025
.025
.030
.020
.020
.020
Circles can be fabricatedout of any of our stock
sheet material.
R1
R2
R3
R4
R5
3/8” dia.
3/4” dia.
1“ dia.
1 1/2” dia.
2“ dia.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
Able Tapes & AdhesivesAble Super Stick Thin Disk Able Foam DiskAble Engraving Table Tape Seklema Table MatFat-Mat Table MatFelt Disks
3M Tapes & Adhesives4016/4032 Off-White Foam Tape 4416 Black Foam Tape4950 White Foam TapeAble Mounting Tape 467MP ADA Tape9502 ADA Tape9500 Clear Tape
Assorted Tapes
66
67
68Heat TapeVelcro TapeAble Magnetic Tape Double-Sided Paper Tape Double-Sided Foam Tape Super Stick
TAPES & ADHESIVES
658 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
66
SUPER STICK, FOAM, DISKS & ENGRAVING TAPETAPES & ADHESIVES
One Roll of 500 DisksOne Roll of 500 Disks
DESCRIPTIONBB2934BB29134
PART NO.3/4”1 3/4”
SIZE
Able Super Stick Thin DisksDesigned for use with our Die-Cut Disks.
One Roll of 500 DisksOne Roll of 500 Disks
DESCRIPTIONBBFD34BBFD134
PART NO.3/4”1 3/4”
SIZE
Able Foam DisksFoam tape for use with our Die-Cut Disks.
SIZEBB29TBB29T12BB29T34
PART NO.1“ x 72 yards1/2“ x 72 yards3/4“ x 72 yards
Able Engraving Table TapeHolds material firmly in place during engraving.
Can be used repeatedly, saving you time at the engraving table.
12” x 12”12” x 24”16“ x 24”24” x 24”24” x 48”
SIZETM1212TM1224TM1624TM2424TM2448
PART NO.
Seklema Table MatHolds work piece without adhesives or clamps
Seklema is a tape-less, clamp-less, and vacuum-less way to hold your material in placewhile engraving.
5”x7”8”x12”9”x12”12”x12”12”x24”24”x24”24”x48”
SIZEFMAT-01FMAT-02FMAT-03FMAT-04FMAT-07FMAT-08FMAT-09
PART NO.Fat-Mat Table Mat
DESCRIPTION PART NO.SIZE
Felt DisksProtects walls and desks from scratches.
1000 disk roll BB22585/8”
NEW!
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
3M FOAM, ADA & CLEAR TAPESTAPES & ADHESIVES
67
1/2” x 36 yards1” x 36 yards1/2” x 72 yards3/4” x 72 yards1” x 72 yards
SIZEBB401612BB40161BB403212BB403234BB40321
PART NO..062”.062”.031”.031”.031”
THICKNESS
4016 & 4032 Off-White Foam TapeFor interior use.
Bonds interior signage to smooth or rough surfaces.
12” x 60 yardsSIZE
BB467MP12PART NO.
.002”THICKNESS
3M ADA Tape 467MPFor bonding ADA applique to substrates.
Smooth surface to smooth surface applications of plastic to plastic or plastic to metal.
24” x 180 yardsSIZE
BB950224PART NO.
.002”THICKNESS
3M ADA Tape 9502For bonding ADA applique to substrates.
Smooth surface to smooth surface applications of plastic to plastic or plastic to metal.
3/4” x 36 yards1” x 36 yards
SIZE PART NO..0055”.0055”
THICKNESS
9500 Clear TapeFor plaques, trophies and name plates.
Smooth surface to smooth surface applications of name plates and plaques to trophies or name holders.
BB495012PART NO.
1/2” x 36 yardsSIZE
.045”THICKNESS
4950 White Foam TapeFor interior and exterior permanent bonding.
Ultimate strength in foam. Permanently bonds interior and exterior signage to smoothor rough surfaces.
BB29CPART NO.
12” x 36 yardsSIZE
Able Mounting TapeUse to tape large sheets prior to fabrication.
This tape can be a real time saver in your fabrication work.
BB29C
BB9500PC34BB9500PC1
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
68
FELT DISKS, VELCRO®, MAGNETIC & MISC TAPESTAPES & ADHESIVES
36 yards36 yards
SIZEBB18AABB18BB
PART NO.1/2”3/4”
WIDTH
Able Double-Sided Paper TapePermanent mounting on smooth surfaces.
Tears by hand.
White HookWhite Loop
DESCRIPTIONBBVELHBBVELL
PART NO.1“ x 25 yards1“ x 25 yards
SIZE
Velcro® TapeUse when removable applications are most desired
1/2” x 100’3/4” x 100’1” x 100’
SIZEBBMAG12BBMAG34BBMAG1
PART NO.Able Magnetic Tape
1/2” x 72 yardsSIZE
CL55148PART NO.
Able Green Heat Tape
Holds up to extreme cold, heat and humid conditions. Ideal for mounting large plaqueplates and plates to equipment and machinery.
1/2” x 72 yards3/4” x 72 yards1” x 72 yards1/2” x 36 yards3/4” x 36 yards1” x 36 yards
SIZEBB19W13212BB19W13234BB19W1321BB19W1612BB19W1634BB19W161
PART NO.1/32”1/32”1/32”1/16”1/16”1/16”
THICKNESS
Able Double-Sided Foam TapePermanent mounting on smooth or rough surfaces.
1/4” x 36 yards1/2” x 36 yards3/4” x 36 yards1” x 36 yards12” x 36 yards
SIZEBB28AAABB28ABB28CBB28BBB28ROLL
PART NO.
Able Super Stick TapeDesigned for those tough to old jobs.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
ENGRAVING CUTTERS
69
Flexible Half RoundQuarter Round CuttersBurnishersParallel CuttersProfilersADA Braille Dot CuttersDiamond GraverBevel CuttersEZ Rider® Attachment
707172727273737373
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
70
FLEXIBLE HALF ROUNDENGRAVING CUTTERS
1/8” Flexible Half RoundTC125FLXHRBB
11/64” Flexible Half RoundTC171FLXHRCC
1/4” Flexible Half RoundTC250FLXHR5
Our most frequently used tool for engraving plastics and metals. Antares cutters are made from Micrograin carbide with our exclusive MicroEdge® finish to stay sharper longer and produce cleaner cuts. Standard cutting tools produce a cut with a 30º side angle for plastics and a 40º side angle for metals. Standard cutters are available in a variety of tip widths ranging from a point (.000”) to the full width of the shank in .005” increments.
Stock cutters are listed in red.Please call for pricing and delivery on all non-stock cutter items.
TIP SIZETC125FLXHRATC125FLXHR5TC125FLXHRAATC125FLXHRBTC125FLXHRBBTC125FLXHRCTC125FLXHRCCTC125FLXHRDTC125FLXHRETC125FLXHRF
PART NO.To Point.005.010.015.020.030.040.060.090.125
1/8” Flexible Half RoundSolid Carbide 1/8” x 4 1/2”
TIP SIZETC171FLXHRATC171FLXHR5TC171FLXHRAATC171FLXHRBTC171FLXHRBBTC171FLXHRCTC171FLXHRCCTC171FLXHRDTC171FLXHRETC171FLXHRF
PART NO.To Point.005.010.015.020.030.040.060.090.125
11/64” Flexible Half RoundSolid Carbide 11/64” x 6 1/2”
TIP SIZETC250FLXHRATC250FLXHR5TC250FLXHRAATC250FLXHRBTC250FLXHRBBTC250FLXHRCTC250FLXHRCCTC250FLXHRDTC250FLXHRETC250FLXHRF
PART NO.To Point.005.010.015.020.030.040.060.090.125
1/4” Flexible Half RoundSolid Carbide 1/4” x 6 1/2”
We can special order any cutter. Please allow 4-5 weeks for delivery.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
QUARTER ROUND CUTTERSENGRAVING CUTTERS
71
1/8” Quarter RoundTC125BALQRBB
11/64” Quarter RoundTC171BALQRC
1/4” Flexible Quarter RoundTC250BALQRB
TIP SIZE PART NO..010.015.020.030
TC125BALQRAATC125BALQRBTC125BALQRBBTC125BALQRC
1/8” Quarter Round CutterSolid Carbide 1/8” x 4 1/2”
TIP SIZE PART NO..010.015.020.030
TC171BALQRAATC171BALQRBTC171BALQRBBTC171BALQRC
11/64” Quarter Round CutterSolid Carbide 11/64” x 6 1/2”
TIP SIZETC250BALQRAATC250BALQRBTC250BALQRBBTC250BALQRC
PART NO..010.015.020.030
1/4” Quarter Round CutterSolid Carbide 1/4” x 6 1/2”
We can special order any cutter. Please allow 4-5 weeks for delivery.
Stock cutters are listed in red.Please call for pricing and delivery on all non-stock cutter items.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
72
BURNISHERS, PARALLEL & PROFILING CUTTERSENGRAVING CUTTERS
CUTTERTC125BRNAATC125BRNBTC125BRNBBTC125BRNCTC171BRNAATC171BRNBTC171BRNBBTC171BRNCTC250BRNAATC250BRNBTC250BRNBBTC250BRNC
PART NO.1/8”1/8”1/8”1/8”11/64”11/64”11/64”11/64”1/4”1/4”1/4”1/4”
LENGTH4 1/2”4 1/2”4 1/2”4 1/2”6 1/2”6 1/2”6 1/2”6 1/2”6 1/2”6 1/2”6 1/2”6 1/2”
TIP SIZE.010”.015”.020”.030”.010”.015”.020”.030”.010”.015”.020”.030”
BurnishersSolid Carbide
CUTTERTC125FLXHRPLTC171FLXHRPLTC250FLXHRPL
PART NO.1/8”11/64”1/4”
LENGTH4 1/2”6 1/2”6 1/2”
TIP SIZE.125”.125”.125”
Parallel CuttersSolid Carbide
CUTTERTC125FLXHRPFTC171FLXHRPFTC250FLXHRPF
PART NO.1/8”11/64”1/4”
LENGTH4 1/2”6 1/2”6 1/2”
TIP SIZEProfileProfileProfile
Profile CuttersSolid Carbide
We can special order any cutter. Please allow 4-5 weeks for delivery.
Stock cutters are listed in red.Please call for pricing and delivery on all non-stock cutter items.
Burnishing is a surface marking technique used to expose the bare metal on coated materials, such as lacquered brass or aluminum. These tools are used in a rotating spindle without a depth nose. Burnishers are not meant to cut deeply into the material. Best results are obtained by using very light spindle pressure and a burnishing attachment. Available in a variety of tip widths ranging from a point .005” to the full width of the shank in .005” increments.
Parallel cutters produce a cut with straight edges and a flat bottom as opposed to the angled or “V” cut from a standard cutting tool. The smallest recommended tip size is .060”. We recommend that the depth of the cutter not exceed 150% of the width. Maximum depth is double the width. When ordering, be sure to specify the depth of the cutter required or the material thickness if cutting completely through.
Profiling cutting tools have a narrow cutting angle and are effective for fine detail engraving and cutting out shapes where a slight bevel is acceptable. The standard angle on Profilers is 15º. Recommended for applications where the smallest parallel tip available is too wide or fragile. The standard tip widths range from .005” to .060”
BurnishingTip
ParallelCuttingTip
ProfilingCuttingTip
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
EZ RIDER®, DIAMOND GRAVER & BEVEL CUTTERSENGRAVING CUTTERS & ACCESSORIES
73
SIZETC250HRBDTC171HRBDTC125QRBD
PART NO.1/4” x 6 1/2”11/64” x 6 1/2”1/8” x 4 1/2”
ADA braille Dot Cutters
SIZETDG12512TDG125-1TDG125-2TDG125-4TDG171TDG250
PART NO.1/8” x 1/2”1/8” x 1 1/8” 90˚1/8” x 1 1/8” 120˚1/8” x 5”11/64” x 6 1/2”1/4” x 7”
Diamond GraverScratch engraving tips
Cutter sharpening service is available from Able Please call for details.
EQUIPMENTBCB5BCB6
PART NO.SIZEBevel Cutters
1/8” x 6”1/4” x 6”
New Hermes B-5New Hermes B-6
SIZEFE18FE1164FE14
PART NO.1/8”11/64”1/4”
EZ Rider® Burnishing AttachmentEliminates pressure problems
Non-rotating tools with diamond tip intended for scratch engraving on trophy brass and aluminum.
Simple, yet powerful solution to eliminating varying pressure problems when attached to your burnishing cutter. You can now burnish in only one pass and achieve a smooth finish.
DiamondGraver
BrailleDotCutter
The Americans with Disabilities Act placed strict standards on the sign industry. We offer tools for cutting Braille dots and for making Cut-Out Letters. The Dot cutter is a special tool that routers away the material from the background and leaves Braille dots with rounded tops.
EZ Rider
Tip Cutting Chart
A AA B BB C CC D E F G H I.005 .010 .015 .020 .030 .040 .060 .090 .125 .171 .187 .250
3/32 1/8 3/16 1/4 5/16 1/2 3/4 1 1-3/8 1-1/2 2Letter Height
Recommended Stroke Width
Stock cutters are listed in red.Please call for pricing and delivery on all non-stock cutter items.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
SublimationName Badges2” White CirclesPaperFRP Sheet StockHeat Tape
75
74
SUBLIMATION PRODUCTS
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
75
BADGE BLANKS, CIRCLES, PAPER & FRP SHEETSSUBLIMATION PRODUCTS
DescriptionM62-R10PART NO.
White RoundsSIZE2“ Circle
CASE QTY.150
Circles
FINISH550155025504553055325516551755315533
PARTNO.
High GlossHigh GlossHigh GlossHigh GlossHigh GlossMatteMatteMatteMatte
SIZE1“ x 3”1 1/4” x 3”1 1/2” x 3”2” x 3”1 1/2” x 3” Oval1 1/4” x 3”1 1/2” x 3”2” x 3”1 1/2” x 3” Oval
CASEQTY.250200200150150200200150150
CORNER.0875”.1625”.1875”.25”
.1625”
.1875”
.25”
Name Badge Blankswith Radius Corners
DESCRIPTION5601F5601Q5601H5603F5603Q5603H
PART NO.One Sided GlossOne Sided GlossOne Sided GlossOne Sided MatteOne Sided MatteOne Sided Matte
SIZE23 1/4” x 47”11 1/2” x 23 1/4”23 1/4” x 23 1/4”23 1/4” x 47”11 1/2” x 23 1/4”23 1/4” x 23 1/4”
FRP Sheet Stock
DESCRIPTION PART NO.SIZE QTY.Paper
CLEPQ851CLEPQ8514CLEPQ111
100100100
8 1/2” x 11”8 1/2” x 14”11” x 17”
Dye Sub. PaperDye Sub. PaperDye Sub. Paper
1/2” x 72 yardsSIZE
CL55148PART NO.
Able Green Heat Tape
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
76
JRS FRAMES & HOLDERS
Traditional Aluminum Holders
Euro Sign System
Flex Frames
Premier Frames
Premier Plus Frames
Architectural Aluminum Frames
Heavy Architectural Frames
Sign Bases & Frames Supplies
Prestige Collection Sign Supports
Decorative Bars & Rails
Curves
Frames with Lenses
Xterior Frames
EZ Sign Kits
Architectural Frames in Molded Plastic
Designer Plastic Frames
Designer 2 Plastic Frames
Coherent Window Series
Evironmentals
Accessories
Colors & Finishes
Sales Kits & Brochures
77-81
82-83
84
85
86
87-91
92
93
94
95
97-98
99
100
101
102-104
105
106
107
108
109-110
111
112
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
77
JRS FRAMES & HOLDERSDESK HOLDERS
A
PN 48
PN 59
PN 30
PN 34
A
A
A
B
B
B
B
All sizes represent inside dimension.Custom lengths are available.All holders and frames can be combined for quantity discounts.
See price list for current pricingand quantity discounts.
Sign holders for the desk are designed in many styles and sizes. Holders are highly polished and anodized in Polished Rose Gold or Polished Silver, enhancing any décor. Styles and sizes are indicated by part number and length. Custom lengths and three custom colors, Matte Black, Satin Silver, and Polished Yellow Gold are available by special order at no extra cost and 7 to 10 days production time. Arch Bronze, JRS Bronze, Satin Yellow Gold, and Satin Rose Gold are also available upon request for a 25% up charge and up to 5 week delivery.
A = Base Width B = Material Thickness
PartNo.
Insert Size AvailableLengthsA. B.
852554701914481116483
3/4”1”
1 1/4”1 1/2”1 1/2”1 5/8”
2”2”
3 1/4”2”
1/16”1/16”1/16”1/16”1/8“1/16”1/16”1/8“1/8“3/32”
4”6”6”
7 1/2”7 1/2”7 1/2”
8”8“10“8”
6”7”
7.5”8”8”8”10”10”12”10”
8”8”8”10”10”10”12”12”
12”
10”10”10”
A = Base Width B = Material Thickness
A = Base Width B = Material Thickness
PartNo.
Insert Size AvailableLengthsA. B.
59 2” 1/16” 8” 10”
A = Base Width B = Material Thickness
PartNo.
Insert Size AvailableLengthsA. B.
34 2” 1/16” 8” Polished Rose Gold &Polished Silver Only.
10”
PartNo.
Insert Size AvailableLengthsA. B.
3130
1 1/2”2”
1/16”1/16”
8”8”
9”10”
10”
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
78
DESK HOLDERSJRS FRAMES & HOLDERS
A
A
A
A
BC
B
PN 15
PN 40
PN 35
PN P100
PN P220
Note: PlateNot Included
B
B
A = Base Width B = Material Thickness
PartNo.
Insert Size Max. SignHeight
AvailableLengthsA. B.
1550971755
3/4”15/16”1 7/16”1 3/32”2 1/2”
1/16”1/16”1/16”1/8”1/8”
2”3”7”4”8”
6”6”8”8”8”
7 1/2”8”10”10”10”
8”10”12”12”12”
10”
A = Base Width B = Material Thickness
PartNo.
Insert Size Max. SignHeight
AvailableLengthsA. B.
35422239
1 1/4”1 1/4”2 1/2”1 1/4”
1/16”1/8“1/8“3/32”
6”6”12”6”
6”6”6”6”
8”8”8”8”
10”10”10”10”
12”
A = Base Width B = Material Thickness
PartNo.
Insert Size Max. SignHeight
AvailableLengthsA. B.
40 1 1/4” 1/16” 3” 5” 8” 10”
Available in clear, aqua, green mist or black. Custom colors areavailable. Call for a quote.
PartNo.
Insert Size Max. SignHeight
AvailableLengthsA. B.
P100 2” 1/16” 6” 8” 10”
Available in black only.
PartNo.
SizeA. B. C.
P220 1 1/8” 1 1/8” 2 5/16”
Sign bases for the desk and counter are designed to support both small and large signs. Holders are highly polished and anodized in Polished Rose Gold or Polished Silver, enhancing any décor. Styles and sizes are indicated by part number and length. Custom lengths and three custom colors, Matte Black, Satin Silver and Polished Yellow Gold are available by special order at no extra charge. Arch Bronze, JRS Bronze, Satin Yellow Gold and Satin Rose Gold are also available upon request for a 25% up charge and up to 5 week deliv-ery.
Custom lengths are available with the exception of P100/P220.All holders and frames can be combined for quantity discounts.
See price list for current pricingand quantity discounts.HELPFUL ORDERING INSTRUCTIONS - Make certain to include thefollowing information: Part No., Length, Color and highlight any special instructions.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
79
JRS FRAMES & HOLDERSWALL & CORRIDOR BRACKETS
Sign holders for the door or wall are available in many stock sizes and lengths. Holders are highly polished and anodized in Polished Rose Gold or Polished Silver, enhancing any décor. Styles and sizes are indicated by part number and length.
Mounting holes are standard in all insert sizes from 1 1/4" to 4". Custom lengths and three custom colors, Matte Black, Satin Silver and Polished Yellow Gold are available by special order at no extra cost. Arch Bronze, JRS Bronze, Satin Yellow Gold and Satin Rose Gold are also available upon request for a 25% up charge up to 5 weeks delivery. Holders are available in Raw Aluminum finish. When ordered Raw, holes are NOT standard and must be requested. Holes available on parts 24"-36" in length for an added charge.
A 36" length is provided without holes in the styles and sizes below for your custom sign requirements. There is a minimum of five 36" lengths per order in any size combination.
PartNo.
Insert Size AvailableLengthsA. B.
8610044284729954687883694899037524951363
1/2”5/8”3/4”1”
1 1/4”1 /12”1 1/2”1 5/8”1 3/4”1 3/4”
2”2”
2 1/2”2 1/2”
3”3”4”4”2”
1/16”1/16”1/16”1/16”1/16”1/16”1/8”1/16”1/16”1/8”1/16”1/8”1/16”1/8”1/16”1/8”1/16”1/8”3/32”
6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”
4”4”4”4”4”4”4”4”4”4”4”4”4”4”4”4”4”4”4”
8”8”8”8”8”8”8”8”8”8”8”8”8”8”8”8”8”8”8”
10”10”10”10”10”10”10”10”10”10”10”10”10”10”10”10”10”10”10”
12”12”12”12”12”12”12”12”12”12”12”12”12”12”12”12”12”12”12”
36”36”36”36”36”36”36”36”36”36”36”36”36”36”36”36”36”36”36”
PartNo.
ANGLED-TOP HOLDERSInsert Size Available
LengthsA. B.565758
1”1 1/2”
2”
1/16”1/16”1/16”
6”8”10”
4”6”8”
8”10”12”
10”36”36”
36”
A = Material Height B = Material ThicknessScrews available in BG, BS, BL (For insert mounting only)Extra screws sold in packs of 100.Hole size is 3/16”
PartNo.
Insert Size AvailableLengthsA. B.
38 2 1/2” 1/8” 3”2” 4” 5” 10” 12” 36”
A
PN 28
PN 36
PN 58
PN 38
A
A
A
B
B
BB
2 1/2”
1/2”
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
MULTIPLE SIGN HOLDERS
80
JRS FRAMES & HOLDERS
PartNo.
Insert Size AvailableLengthsA. B. C.
23 2” 1 1/2” 1/16” 9” 10” 12”
PartNo.
Insert Size AvailableLengthsA. B. C.
61 1” 1 1/4” 1/16” 8” 10”
PartNo.
Insert Size AvailableLengthsA. B. C.
7133
1 1/4”2”
1 1/4”2”
1/16”1/16”
6”8”
8”10”
10”
PartNo.
Insert Size AvailableLengthsA. B. C.
60 2” 1 1/2” 1/16” 8” 10”
Sign holders for double signs or multiple uses are designed in various styles and sizes. Holders are highly polished and anodized in Polished Rose Gold or Polished Silver, enhancing any décor. Styles and sizes are indicated by part number and length. Custom lengths and three custom colors, Matte Black, Satin Silver and Polished Yellow Gold are available by special order at no extra cost. Arch Bronze, JRS Bronze, Satin Yellow Gold and Satin Rose Gold are also available upon request for a 25% up charge and up to 5 weeks deliv-ery.
All sizes represent inside dimensions.All holders and frames can be combined for quantity discounts.
See price list for current pricingand quantity discounts.
HELPFUL ORDERING INSTRUCTIONS - Make certain to include thefollowing information: Part No., Length, Color and highlight any specialinstructions.
A
A
A
C
A
BC
B
B
C
C
PN 23
PN 61
PN 33
PN 60
B
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
MULTIPLE WALL BRACKETS
Sign holders for multiple signs are designed to be used as individual signs or stacked on top of one another to form mini-directories. The special beveled edges insure a finished look with endless combina-tions. Holders are highly polished and anodized in Polished Rose Gold or Polished Silver, enhancing any décor. Styles and sizes are indicated by part number and length. Custom lengths and three custom colors, Matte Black, Satin Silver and Polished Yellow Gold are available by special order at no extra cost. Arch Bronze, JRS Bronze, Satin Yellow Gold and Satin Rose Gold are also available upon request for a 25% up charge and up to 5 weeks delivery. Holes are standard on all parts up to 24” in length. Holes available on parts 24” and up in length for an added charge.
2” minimum on custom lengths.5 piece minimum on 36” lengths.
PartNo.
Insert Size AvailableLengthsA. B.
115107108
2”1 1/2”1 1/4”
1”1”
3/4”
C.1/16”1/16”1/16”
6”6”6”
8”8”8”
10”10”10”
36”36”36”
PartNo.
Insert Size AvailableLengths
104110
A.1”
3/4”
B.1”
3/4”
C.1/16”1/16”
6”6”
8”8”
10”10”
36”36”
PartNo.
Insert Size AvailableLengthsA. B.
106112109
1”1 1/2”3/4”
1”1 1/2”3/4”
C.1”
1 1/2”3/4”
D.1/16”1/16”1/16”
6”6”6”
8”8”8”
10”10”10”
36”36”36”
81
JRS FRAMES & HOLDERS
PartNo.
Insert Size AvailableLengthsA. B.
103114116117118
1”3/4”
1 1/2”2”3”
1/16”1/16”1/16”1/16”1/16”
6”6”6”6”6”
8”8”8”8”8”
10”10”10”10”10”
36”36”36”36”36”
No Holes on Part Nos. 103 & 114
PartNo. DescriptionInsert Size Length75837684277877
1/16”1/8“1/16”1/8”1/8”1/16”1/16”
36”36”36”36”36”36”36”
J MoldingJ Molding
DividerDivider
See ImageSee ImageSee Image
Extruded moldings and dividers for your custom sign requirements are available in 36” lengths.
A
PN 107
PN 106
PN 104
PN 103 PN 75
PN 77
PN 76
PN 27
PN 78
A
C
B
A
B
A
C
D
B
C
B
.80”ID 1”
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
82
Size
Square and round head screws are specially designed to cap off extrusions, and lock in the holder assemblies. Simply remove the top screws and slide assemblies out for a quick change. Screw holes are tapped for repeated use. Custom sizes are available. Please fax a quote request to our Quote Department. Available colors: Satin Silver, Polished Silver, Matte Black, Polished Yellow Gold and Polished Rose Gold. Prices are for frames up to 100 perimeter inches. Please request a quote for larger frames. Frames may be subject to crating charge. Maximum frame size is 39” x 36”.
2” x 8”, 2” x 10” and other popular size directories in the Euro System use standard JRS holders (#36, 106, 109, 112, 89 and 37). Sign assemblies with sizes such as 6” x 6”, 8” x 8”, 12“ x 12” etc. and other custom sizes use two #75 J-moldings as top and bottom rails for sign assemblies.
EURO SIGN SYSTEMJRS FRAMES & HOLDERS
All holders and frames can be combined for quantity discounts.All frames must be ordered by INSIDE DIMENSION.
Commonly ordered sizes listed above. Not stocked. Non-Returnable.
Larger frames may require ABS backer for sturdiness.Nominal charge will apply.
Note: All Euro Holders hold1/16”
3/8” Rail
3/8” Rail
See price list for current pricingand quantity discounts.
PartNo. Size
218208 Square220208 Round218210 Square220210 Round218312 Square220312 Round218618 Square220618 Round218606 Square220606 Round218212 Square220212 Round218808 Square220808 Round218806 Square220806 Round
2” x 8”2” x 8”2” x 10”2” x 10”3” x 12”3” x 12”6” x 18”6” x 18”6” x 6”6” x 6”
12” x 12”12” x 12”8” x 8”8” x 8”8” x 6”8” x 6”
NOTE: All frames are madeto order. Custom sizes available. Non-returnable.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
EURO SIGN SYSTEM
83
JRS FRAMES & HOLDERS
Sign assemblies are stacked to create mini directories which round out the Euro Sign System.
Specially designed machine screws lock the entire group of sign assemblies in place. Simply remove the top screws and slide assem-blies out for a quick change. Screw holes are tapped for repeated use. Vertical dividers are used for multiple columns.
Prices are for frames up to 100 perimeter inches. Please request a quote for larger frames. Frames may be subject to crating charges. Maxi-mum frames size is 39” x 36”
Examples: Holds 1/16” inserts.
All frames are made to order.Custom sizes are available.
Non-returnable.
See price list for currentpricing and quantitydiscounts.
Frames are to be orderedby INSIDE DIMENSION.
Rails measure 3/8”
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
FLEX FRAMES
84
JRS FRAMES & HOLDERS
Attractive, functional and flexible, FLEX is a tamper resistant sign frame option that can be utilized for virtually any interior signage application. Square side rails with finished ends use a mix of our wall brackets that slide into the rails and are secured with a set screw combination offering a wide range of signage options while maintain-ing ease of maintenance and changeability. FLEX can be mounted using magnets inside of our other frame systems* to make simple personnel signs or directories. Available in 5 anodized colors: SATIN SILVER, POLISHED SILVER, MATTE BLACK, POLISHED YELLOW GOLD AND POLISHED ROSE GOLD.
Square Rail: 3/16" face width and 1/2" outside depth.
Designed to accommodate 1/16" material.
Uses 3/16 ABS backer.
Mounting holes available upon request.
Max rail length = 39".
Technical Information:
Room Identification
Directional signage/directories
Personal ID signs
Departmental ID signs
A solution for banks, financial institutions, call centers, office facilities, hospitals, schools, colleges and libraries.
Applications:
FLEX can be mounted using magnets inside of our other frame systems* to make simple personnel signs or directories.* Please call for details.
Frames are designed for mounting with double-sided tape, silicone adhesives or mounting holes. Holes are provided by request only at no additional charge.
Installation:
The Flex line is manufactured with a 3/16” ABS backing and comes as a flush wall mount. Screw holes avail-able by request at no charge. Mag-netic metal backing can be requested for a nominal charge.
Fax or email drawing for directory pricing.
*USES A 5/64” ALLEN WRENCH -NOT INCLUDED.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
PREMIER FRAMES
85
JRS FRAMES & HOLDERS
ACCESSORIES
B08000 - 1 3/16” Diameter Suction Cup
B09450 - 1/2” x 12” Light 3M DUAL LOCK
SEE PAGE 110 FOR MORE ACCESSORIES.
Sign Snap contains both topand bottom with adhesive.
B09500 - 1/2” x 12” Sign Snap
B09400 - 1/2” x 12” Dense 3M DUAL LOCK
3M DUAL LOCK B09400 & B09450can be combined for quantity break.
See price list for current pricingand quantity discounts.
Precision mitered from an extrusion of premium alloy in three profes-sional styles - Beveled, Radiused and Boxed - makes this sign system a top of the line favorite. Each style has several features that make professional signs simple:
Prices are for frames up to 100 perimeter inches. Fax for special quote on frames of 100 perimeter inches or greater. Frames may be subject to crating charges.
All holders and frames can be combined for quantity discounts.
Desk frame model available. Fax for a quote.
Each frame is designed for complete support of 1/16” sign material.
Nine rich anodized colors are available in all three styles: Polished Silver, Satin Silver, Polished Yellow Gold, Satin Yellow Gold, Polished Rose Gold, Satin Rose Gold, Matte Black, Arch Bronze and JRS Bronze.
Minimum size is 2” x 4”. Maximum size is 36” x 36”.
A trough 1/2” wide runs the entire inside perimeter of each frame which accommodates adhesive-backed 3M DUAL LOCK or Sign Snap so that a tamper-resistant plate snaps in and out with the use of a suction cup.
Frames are designed for mounting to wall or door with double-sided tape or silicone-type adhesive. Holes will be provided upon request, at no extra charge.
Powder Coat finishes available.
Premier cannot accommodate a lens or dividers,see Premier Plus.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
PREMIER PLUS FRAMES
86
JRS FRAMES & HOLDERS
See price list for current pricingand quantity discounts.
Please specify part number, inside dimen-sion, inside depth, and color. Prices are for frames up to 100 perimeter inches. Fax for a special quote on frames 100 perimeter inches or greater. Frames may be subject to crating charges.
All holders and frames can be combined for quantity discounts.
Premier Plus Frames are available with stan-dard 1/8” or custom 1/4” dividers in vertical or horizontal positions. Divided frames should be ordered by giving the inside dimension of each section and the overall inside dimension of the frame.
2” Divider minimum
1/8” standard divider on all frames except quarter inch solid
1/4” standard divider on quarter inch solid frames
Precision mitered from an extrusion of premium alloy in four profes-sional styles: Beveled, Quarter Round, Boxed, and Quarter Inch Solid, this sign system a top of the line favorite.
HELPFUL ORDERING INSTRUCTIONS: When ordering, specify INSIDE DIMEN-SION of frame, INSIDE DEPTH and COLOR. Divider frames are priced by adding the linear-inch of dividers, multiplying by per-inch price and adding the total to the perimeter price of each frame.
Nine rich anodized colors are available in all four styles: Polished Silver, Satin Silver, Polished Yellow Gold, Satin Yellow Gold, Polished Rose Gold, Satin Rose Gold, Matte Black, Arch Bronze and JRS Bronze.
Seven powder coat finishes are available: Medium Gray, Pewter (light gray), Black, White, Almond, Brown, and Arch Brown. Lenses not available with powder coat finishes (2” minimum size).
Each frame style is available with either a 3/16” or 5/16“ inside depth. Inside depth must be specified when ordering.
Frames are designed for mounting to wall or door with double-sided tape or silicone adhesives. Holes will be provided upon request.
All frames are available with optional matte black inside, suitable for changeable magnetic signs for an additional cost. See price guide.
Lenses are laser cut from semi-flexible .060 or .080 non-glare acrylic and are designed with tabs that snap securely into frames.
Lenses can easily be removed by using a suction cup placed inside the center of the frame. *For lens pricing, please refer to pricing book. Maximum lens size is 200 sq. inches.
Minimum size is 2” x 4”. Maximum size is 36” x 36” for frames and dividers.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
ARCHITECTURAL ALUMINUM FRAMES
87
JRS FRAMES & HOLDERS
MASONITEBACKER
HELPFUL ORDERING INSTRUCTIONS: Please watch for the BOLD numbers in our price guide as those represent our default specifications. All frames will be made according to these standards unless otherwise specified when ordering. Please call special attention to any deviations from our default specifications. ALWAYS SPECIFY INSIDE DIMENSIONS.
Architectural Aluminum Frames are custom fabricated to your specifi-cations based on the inside dimension of the frame. Custom Wall Frames, Frames with Dividers, Desk Frames, Counter Frames, Corri-dor and Ceiling Frames are all available with:
Nine anodized finishes: Polished Silver, Satin Silver, Polished Yellow Gold, Satin Yellow Gold, Polished Rose Gold, Satin Rose Gold, Matte Black, Arch Bronze and JRS Bronze.
Seven powder coat finishes are available: Medium Gray, Pewter (light gray), Black, White, Almond, Brown, and Arch Brown. May require additional lead time. (2” min size)
Available with a matte black inside metal surface for changeable magnetic signs for an additional charge. See price guide.
1/16” Wall Thickness - Part number 240 square corner and 340 round corner frames are available with either a 3/8” or 1/2” outside depth plus a 1/8” backer plate. If no outside depth is specified, we will make the frames using the 3/8” outside depth. Frames without backer plates are available by request.
The inside depth (distance from, the surface of frame to inside masonite) is 3/16” for 3/8” frame and 5/16” for 1/2” frame. 3/16” depth is available by request for the 1/2” frame. Please refer to the illustrations on this page for further details.
1/8” Wall Thickness - Part number 540 square corner and 640 round corner frames are available with a 1/2” outside depth plus a 1/8” back plate. Frames without backer plate are available by request.
The inside depth (distance from the surface of frame to inside masonite) is 5/16”. 3/16” depth is available by request. Please refer to the illustrations on this page for further details. Other custom depths are available by special quotation.
Four radius corners - Inside dimensions 3/8”, 1/2”, 9/16” and 13/16”. Unless otherwise specified, we will make all radius frames with a 3/8” corner. Please call for pricing and availability on special radii.
STANDARD RADII
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
ARCHITECTURAL ALUMINUM FRAMES
88
JRS FRAMES & HOLDERS
See price list for current pricing and quantitydiscounts.
Architectural sign frames are custom fabricated from continuous alumi-num extrusion from 1/16” or 1/8” wall thickness to your custom size requirements.
Frames are available in nine anodized finishes: Polished Silver, Satin Silver, Polished Yellow Gold, Satin Yellow Gold, Polished Rose Gold, Satin Rose Gold, Matte Black, Arch Bronze and JRS Bronze.
Seven powder coat finishes are available: Medium Gray, Pewter (light gray), Black, White, Almond, Brown, and Arch Brown. Powder coat finish frames must have backs. (Min 2” size)
Please specify part number, inside dimensions, outside depth, inside depth and color.
All frames are available with optional matte black inside, suitable for changeable magnetic signs for an additional cost. Black plastic is also available inside and outside instead of masonite. See price list (up charge applies).
Prices are for frames up to 100 perimeter inches. Please fax for quote on larger frames.
Holes available upon request at no extra charge.
Net price is calculated by multiplying the perimeter inch price by the perimeter inches of the frame.
Example: A340 2” x 8” = 2 + 8 + 2 + 8 = 20 perimeter inches20 perimeter inches x cost per inch = Net PriceAdd the length of all internal dividers to perimeter inches*
Lead time may vary for special colors on desk, counter, corridor and ceiling.
PartNo.
DOOR OR WALLWall
ThicknessCorner
IDFrameDepth
340240640540
1/16”1/16”1/8“1/8“
Round (3/8”, 1/2”, 9/16”, 13/16”)Square
Round (3/8”, 1/2”, 9/16”, 13/16”)Square
3/8” or 1/2”3/8” or 1/2”
1/2”1/2”
PartNo.
DESKWall
ThicknessCorner
IDFrameDepth
311211611511Maximum sign height 4”
All holders and frames can be combined for quantity discounts.
Standard sizes listed in bold.
1/16”1/16”1/8“1/8“
Round (3/8”, 1/2”, 9/16”, 13/16”)Square
Round (3/8”, 1/2”, 9/16”, 13/16”)Square
3/8” or 1/2”3/8” or 1/2”
1/2”1/2”
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
ARCHITECTURAL ALUMINUM FRAMES
89
JRS FRAMES & HOLDERS
PartNo.
COUNTERWall
ThicknessCorner
IDFrameDepth
321 Single322 Double221 Single222 Double621 Single622 Double521 Single522 Double
1/16”1/16”1/16”1/16”1/8“1/8“1/8“1/8“
Round (3/8”, 1/2”, 9/16”, 13/16”)Round (3/8”, 1/2”, 9/16”, 13/16”)
SquareSquare
Round (3/8”, 1/2”, 9/16”, 13/16”)Round (3/8”, 1/2”, 9/16”, 13/16”)
SquareSquare
3/8” or 1/2”3/8” or 1/2”3/8” or 1/2”3/8” or 1/2”
1/2”1/2”1/2”1/2”
Maximum sign height 10”
PartNo.
CORRIDORWall
ThicknessCorner
IDFrameDepth
361 Single362 Double261 Single262 Double661 Single662 Double561 Single562 Double
1/16”1/16”1/16”1/16”1/8“1/8“1/8“1/8“
Round (3/8”, 1/2”, 9/16”, 13/16”)Round (3/8”, 1/2”, 9/16”, 13/16”)
SquareSquare
Round (3/8”, 1/2”, 9/16”, 13/16”)Round (3/8”, 1/2”, 9/16”, 13/16”)
SquareSquare
3/8” or 1/2”3/8” or 1/2”3/8” or 1/2”3/8” or 1/2”
1/2”1/2”1/2”1/2”
Minimum height 2”
PartNo.
CEILINGWall
ThicknessCorner
IDFrameDepth
371 Single372 Double271 Single272 Double671 Single672 Double571 Single572 Double
1/16”1/16”1/16”1/16”1/8“1/8“1/8“1/8“
Round (3/8”, 1/2”, 9/16”, 13/16”)Round (3/8”, 1/2”, 9/16”, 13/16”)
SquareSquare
Round (3/8”, 1/2”, 9/16”, 13/16”)Round (3/8”, 1/2”, 9/16”, 13/16”)
SquareSquare
3/8” or 1/2”3/8” or 1/2”3/8” or 1/2”3/8” or 1/2”
1/2”1/2”1/2”1/2”
HELPFUL ORDERING INSTRUCTIONS: Please watch for the BOLD numbers in our price guide as those represent our default specifications. All frames will be made according to these standards unless otherwise specified when ordering. Please call special attention to any deviations from our default specifications. ALWAYS SPECIFY DIMENSIONS.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
ARCHITECTURAL ALUMINUM FRAMES
90
JRS FRAMES & HOLDERS
Special requirements for room control and identification are accom-plished with these unique frames of anodized aluminum.
Both 1/16” wall and 1/8“ wall frames have 1/2” outside depth plus 1/8“ backer and 3/16” inside depth.
Frame sizes are all inside dimensions.
Nine standard colors: Polished Silver, Satin Silver, Polished Yellow Gold, Satin Yellow Gold, Polished Rose Gold, Satin Rose Gold, Matte Black, Arch Bronze and JRS Bronze.
All frames on this page are available in custom sizes. Please request quote.
6“ x 6” frame containing a 1“ x 6” extrusion for a 1/16“ message plate and a secondary 1/16” slot for a 1“ x 3” sliding plate to uncover alternate mes-sage.
8“ x 8” frame containing a 1“ x 8” extrusion for a 1/16“ message plate and a secondary 1/16” slot for a 1“ x 4” sliding plate to uncover alternate message.
2” x 13” Slider Frame is designed for 2” x 10” message plates to slide left or right to expose message at opposite end.
6“ x 6” Mini-Directory features a one-piece magnetic backed extru-sion with six 1/2” x 6” slots for easy plate changes.
8“ x 8” Mini-Directory features a one-piece magnetic backed extru-sion with seven 5/8” x 8” slots for easy plate changes.
3/8” InsideRadius Corner
SquareCorner
6” x 6”1/16” Wall1/8” Wall
341-66641-66
241-66541-66
8” x 8”1/16” Wall1/8” Wall
341-88641-88
241-88541-88
2” x 13”1/16” Wall1/8” Wall
344-23644-23
244-23544-23
3/8” InsideRadius Corner
SquareCorner
MINI-DIRECTORIESCorner
All frames made to order. Non-returnable.
6” x 6”1/16” Wall1/8” Wall
342-66642-66
242-66542-66
8” x 8”1/16” Wall1/8” Wall
343-88643-88
243-88543-88
CHANGEABLE MESSAGE FRAMES
All frames are available with dividers in either horizontal, vertical or both positions. These frames must have a backer plate.
To price frames, simply add the total of the perimeter inches to the total of the dividers and multiply that by the total cost per inch of the particular frame type ordered. Divider frames should be ordered by giving the inside dimension of each section. Overall frame size is increased by the thickness of each divider within the frame.
DIVIDED FRAMES & MINI-DIRECTORIES
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
CUSTOM SHAPED ARCHITECTURAL ALUMINUM FRAMES
91
JRS FRAMES & HOLDERS
Circles, Triangles, Ovals, Half Round Directories and more are avail-able in our 300 (1/16” wall) or 600 (1/8” wall) Aluminum Extrusion Frames. Frames with custom shapes with or without dividers are fabricated to your specifications in all of our standard anodized and powder coat finishes. Please send drawings with size specifications, finish and quantity for quotation via fax.
CALL US WITHYOUR CUSTOMFABRICATION
NEEDS.WE CAN HELP!
2” Divider Minimum.
All frames are orderedby inside dimension.
Please specify part number, inside dimension, inside depth and color when ordering.
All holders and frames can be combined for quantity discounts.
All frames are made to order and are non-returnable.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
This line of frames fabricated from a heavy 1/8” thick wall and 1 3/4” or 1 1/4” wide extrusions. They can be used either as a double or single sided frame for counters, desks or walls. All Frames are custom fabricated to your specifications. Sharp, clean, square corners are fabricated from continuous extrusion.
Frames available in nine anodized finishes: Polished Silver, Satin Silver, Polished Yellow Gold, Satin Yellow Gold, Polished Rose Gold, Satin Rose Gold, Matte Black, Arch Bronze and JRS Bronze.
Not available in Powder Coat finishes.
All frames are available with optional Matte Black metal inside suitable for changeable magnetic signs. (Up charge applies)
Please specify part number, inside dimension, inside depth and color when ordering.
Net price is calculated by multiplying perimeter inch price by the perimeter inches of the frame.
Example: a 932D frame:2” x 8” = 2+8+2+8=20 Perimeter Inches.20 perimeter inches x price per inch = $ Net Cost
PartNo.
FrameThickness
InsideDepth
932D Double Sided932S Single Sided942D Double Sided942S Single Sided
1 3/4”1 3/4”1 3/4”1 3/4”
5/16”5/16”5/16”5/16”
Please specify part number, inside dimension, inside depth and color when ordering.
All holders and frames can be combined for quantity discounts.
See price list for current pricing and quantity discounts.
All Frames ordered by inside dimension.
HEAVY ARCHITECTURAL SIGNAGE
92
JRS FRAMES & HOLDERS
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
ARCHITECTURAL SIGN BASES AND FRAME SUPPLIES
93
JRS FRAMES & HOLDERS
Architectural sign holders, designed in contemporary styles, come in a variety of shapes and sizes. Holders are highly polished and anod-ized in Polished Rose Gold or Polished Silver, enhancing any décor. Styles and sizes are indicated by part number and length. Custom lengths and three custom colors, Matte Black, Satin Silver and Polished Yellow Gold are available by special order at no extra cost. Arch Bronze, JRS Bronze, Satin Yellow and Satin Rose Gold are also available upon request for a 25% up charge and up to 4 week deliv-ery. MOUNTING PLATE FOR CORRIDOR AND CEILING BRACK-ETS CONCEAL MOUNTING SCREWS.
PartNo.
SizeA B
MaximumSign Height
727374111200294
2 1/8”2”
1 1/2”1 1/2”
2”2 1/8”
1/8“1/8“1/8“1/8“
12” No Holes5”4”
12”12”
PartNo.
Product Thickness Sheet Size(approx)
B02140B02116B02118
Thin TinBlack Styrene
Black ABS
.0101/16”1/8”
21” x 40”24” x 48”24” x 48”
PartNo.
Product Lengths
202203206*Standard without holes
six 1/2” x 1/16” slotsseven 5/8” x 1/16” slotsone 4 13/16” x 1/16” slot
6”6”6”
8”8”8”
10”10”10”
36”36”36”
SIGN BASES
A= Height B = Material Thickness
THIN TIN (Magnetic Material)Thin Tin for mounting sign magnetically. .010 thick with adhesive back and black paper coated front surface. Thin Tin can be cut with shears or industrial scissors. See price guide for pricing.
BLACK STYRENEBlack styrene with unfinished surfaces is used as filler material. See price guide for pricing.
BLACK ABS AIR CELL BLACKTough, durable Air Cell finish on one side used for backing material.
FRAME SUPPLIES
FRAME EXTRUSIONS
1/2”1/16” thickness
PN200 + PN94 = PN294
1/2”
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
THE PRESTIGE COLLECTION
94
JRS FRAMES & HOLDERS
Special Anodized colors areavailable for a 25% up chargeand up to 5 weeks delivery foraluminum sign supports.
Special Anodized Colors:Arch Bronze, JRS Bronze,Satin Yellow Gold andSatin Rose Gold
Example:CN1925CP is the brass signsupport in polished chrome.
When ordering, add color codeto the end of the part number toindicate color choice.
PartNo.
Description Dimensions(W x L)
CN1925CA1925CN1319CA1319
Sign Support - BrassSign Support - AluminumSign Support - BrassSign Support - Aluminum
3/4” x 1 1/4”3/4” x 1 1/4”
1/2” x 7/8”1/2” x 7/8”
Typical Uses: Interior Signage Fixture
Material Type: Plated Brass or Anodized AluminumFull Supports 1/16” to 1/2” MaterialInstallation Method: Mount utilizing appropriate #6 or #8 screws for walltype. (screws not included)Standard Available Colors:
Personnel ID SignsDepartment ID SignsDirectional SignsInformational or Regulatory SignsBuilding Directories
Aluminum: Satin Silver (SS), Matte Black (BL), Polished Silver (BS),Polished Rose Gold (BG), Polished Yellow Gold (BYG)Brass: Polished Chrome (CP), Satin Chrome (SC), Polished Yellow Gold (BYG), Satin Yellow Gold (SG)Special colors available for aluminum sign supports.
STANDARD FEATURES AND OPTIONS
Stand-offs are packaged 4 per pack.
ARCHITECTURAL SIGN SUPPORTS
Length
Width
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
DECORATIVE BARS & RAILS
95
JRS FRAMES & HOLDERS
Four sizes of decorative bars create bold metallic borders for your signs. Standard format of top and bottom bars will be manufac-tured unless left side, right side bars are specified. Use same size bar or mix two different sizes for a unique look. When ordering, please specify bar size.
The Decorative Rail frame system is a clean, simple frame system that utilizes similar dynamics as our Deco Bar system in a more subtle appearance. Ideal for room identification, personnel nameplates, and evacuation plans, the Decorative Rail system is the solution when looking for a classic architectural look without breaking the budget.
All four sides can be made into a complete four-sided frame.
Bars available in 9 anodized finishes: Satin Silver and Matte Black are standard. Polished Silver, Polished Rose Gold, Polished Yellow Gold, Arch Bronze, JRS Bronze, Satin Yellow Gold and Satin Rose Gold are available for a 35% up charge. All parts are anodized individually to give finished ends.
Please specify part number, inside dimension and color when ordering. Inside depth is 1/4” unless specified.
Fax for quote on frames over 100 perimeter inches.
Divided frames available. Maximum 2 dividers per frame.
Not all formats accommodate a lens.
Decorative Rails
PartNo.
Size
213214215216
5/8”1”
1 1/2”2”
Bars Only
2132214221522162
5/8”1” Bar
1 1/2” Bar2” Bar
2-Sided Frame
2134214421542164
5/8”1” Bar
1 1/2” Bar2” Bar
4-Sided Frame
PartNo.
Size
208217
1/2”1/4”
Bars Only
20822172
1/2”1/4”
2-Side Frame
20842174
1/2”1/4”
4-Side Frame
LENSESLenses are made of a semi-flexible .060 or .080 non-glare acrylic and designed with tabs that snap the lens securely into the frame.
Lenses snap out by the use of a suction cup placed in the center of the lens. Maximum lens size is 200 square inches.
Net price of lens is calculated by total square inches.
Please specify part number, inside dimension, inside depth and color. Prices are for frames up to 100 perimeter inches. Please request quote for larger frames.
All holders and frames can be combined for quantity discounts.
Deco Bar Two-Sided Frames2132, 2142, 2152, 2162
Deco Bar Four-Sided Frames2134, 2144, 2154, 2164
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
CURVED FACE SIGN FRAMES
96
JRS FRAMES & HOLDERS
What happens when you combine the simple easy to use aspects of our Traditional Holder line with the flexible nature of our Custom Frame lines? You get Curves! Innovative and cost effective.
FEATURES9 anodized color choicesTamper resistantCustom sizing availableUses 1/16” engraving materialCan use a lens with paper insertDesk mount also available
TYPICAL USESPersonnel SignsRoom IdentificationPoint of PurchaseDirectional Ceiling and Wall SignageDirectories
Manufactured from premium alloy with either molded or custom fabri-cated aluminum end caps. Curves has many applications including: personnel signs, room identification sign and directional way-finding signs. Curves can be mounted to a wall or partition, hung from the ceiling with a fixed bracket or wire, flag mounted or used as a desk sign holder. Literally, the options end only with your imagination.
FLEXIBLE... SIMPLE... EASY!
NOTE: 1/32” material will beused for lensed on frames 4”and under.Standard BL plastic endcaps will be used if color isnot specified.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
CURVED FACE SIGN FRAMES
97
JRS FRAMES & HOLDERSPartNo.
End CapWidth
A B
Insert MaterialThickness
229229L229F1229F2229C1229C2229C3229C4
2 1/2”Frame with LensSingle-Sided Flag MountDouble-Sided Flag MountSingle-Sided Hanging CeilingDouble-Sided Hanging CeilingSingle-Sided Flush-Mount CeilingDouble-Sided Flush-Mount Ceiling
1/16”
230230L230F1230F2230C1230C2230C3230C4
4”Frame with LensSingle-Sided Flag MountDouble-Sided Flag MountSingle-Sided Hanging CeilingDouble-Sided Hanging CeilingSingle-Sided Flush-Mount CeilingDouble-Sided Flush-Mount Ceiling
1/16”
231231L231F1231F2231C1231C2231C3231C4
6”Frame with LensSingle-Sided Flag MountDouble-Sided Flag MountSingle-Sided Hanging CeilingDouble-Sided Hanging CeilingSingle-Sided Flush-Mount CeilingDouble-Sided Flush-Mount Ceiling
1/16”
232232L232F1232F2232C1232C2232C3232C4
8”Frame with LensSingle-Sided Flag MountDouble-Sided Flag MountSingle-Sided Hanging CeilingDouble-Sided Hanging CeilingSingle-Sided Flush-Mount CeilingDouble-Sided Flush-Mount Ceiling
1/16”
233-811233-811L233-811F1233-811F2233-811C1233-811C2233-811C3233-811C4
8 1/2” x 11”Frame with LensSingle-Sided Flag MountDouble-Sided Flag MountSingle-Sided Hanging CeilingDouble-Sided Hanging CeilingSingle-Sided Flush-Mount CeilingDouble-Sided Flush-Mount Ceiling
1/16”
233-814233-814L233-814F1233-814F2233-814C1233-814C2233-814C3233-814C4
8 1/2” x 14”Frame with LensSingle-Sided Flag MountDouble-Sided Flag MountSingle-Sided Hanging CeilingDouble-Sided Hanging CeilingSingle-Sided Flush-Mount CeilingDouble-Sided Flush-Mount Ceiling
1/16”
Flush Ceiling Mount
Flag Mount*
Hanging Ceiling Sign
*Some size restrictions on Flag Mount,Call for details.
All frames are made to order.Not Stocked. Non-Returnable
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
PartNo.
End CapWidth
A B
Insert MaterialThickness
233-117233-117L233-117F1233-117F2233-117C1233-117C2233-117C3233-117C4CU-CUST
11” x 17”Frame with LensSingle-sided Flag MountDouble-sided Flag MountSingle-sided Hanging CeilingDouble-sided Hanging CeilingSingle-sided Flush-Mount CeilingDouble-sided Flush-Mount CeilingCustom Size Curve Frame
1/16”
PartNo.
Size
CAP2.5CAP4CAP6CAP8CAP8.5CAP9CAP10CAP11CAP12
2 1/2”4”6”8”8.5”9”10”11”12”
2 End Caps + Screws2 End Caps + Screws2 End Caps + Screws2 End Caps + Screws2 End Caps + Screws2 End Caps + Screws2 End Caps + Screws2 End Caps + Screws2 End Caps + Screws
Color Options (Please Specify
Gray or BlackGray or BlackGray or BlackGray or BlackGray or BlackGray or BlackGray or BlackGray or BlackGray or Black
Frame price includes standard black end caps and screws.Final customer assembly is required. Assembly can beaccomplished for a nominal charge.
All holders and frames can be combined for quantity discounts.See price list for current pricing and quantity discounts.
Metal end caps available in SS/BL only. Call for pricing.
Any frame specifying F1 thru C4 requires a drawing showingend cap placement.
(1/8” Thickness)
INJECTION MOLDED AND ALUMINUM END CAPS
End Caps andScrewsavailable inBL, GR, metal
CURVED FACE SIGN FRAMES
98
JRS FRAMES & HOLDERS
When ordering specify Part No and length wanted (for example 229-08, is a 2 1/2” x 8” frame)
When ordering with specific Frame Options, simply add suffix to the end of the Part No. (229-08L is a 2 1/2” x 8” frame with lens)
Max length extending from the wall on a Flag Mount frame will vary with Part No, please contact us with the Flag Mounted frames exceeding 12” in length - Please supply drawing for Flag Mounted frames to ensure accuracy.
Custom End Width from 8” to 24” is available.
First number denotes end cap width (for example a frame that is 10” x 2” would have a 10” end cap width and arc.)
Accommodates 1/16” engraving mate-rial.
Accommodates .060 lens or .030 lens.
Pricing included end caps and screws, not assembled (frames may be assembled for a nominal charge).
Holes are not standard - please request holes on order at no extra charge.
Extended lead time is required for special colors.
2” Minimum size for custom orders.
Important Ordering Notes:
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
ALUMINUM FRAMES WITH LENSES
99
JRS FRAMES & HOLDERS
SNAP IN LENSES are designed for custom size aluminum frames in sizes from 6 to 100 square inches.
Lenses are made of a semi-flexible .060” or .080” non-glare acrylic designed with tabs that snap the lens securely into the frame. Lenses snap out by the use of a suction cup. Maximum lens size is 200 square inches.
Net price of lens is calculated by total square inches.
Add frame cost and lens cost together . Treat frame and lens as one unit for quantity discounts.
HOLES BY REQUEST ONLY.
Please specify part number, inside dimension, inside depth and color. Prices are for frames up to 100 perimeter inches. Please request quote on larger frames.
All holders and frames can be combined for quantity discounts.
See price list for current pricing and quantity discounts.
Net price calculated by multiplying the perimeter inch price by the total perimeter inches of the frame.Example: Part #140 2” x 8” = 2 + 8 + 2 + 8 = 20 perimeter inches20 perimeter inches x price per perimeter inch = Net Price
DOOR OR WALL
Lenses
140 Square Corner940 Round Corner 3/8” inside radius
DESK141 Square Corner941 Round Corner 3/8” inside radius
Frames have 1/8” wall thickness, 7/16” outside depth. MUST SPECIFY DEPTH WHEN ORDERING.
Lenses snap in and out with the aid of a suction cup placed in the center of the lens.
Dividers are used to make multi-lens compartments.
Special matte black dividers can be used to make compart-ments under a single lens. (Max 3 dividers)
Frames can be made to accommodate paper and 1/32”, 1/16”, or 1/18” sign material.
Frames area available in nine anodized finishes: Polished Rose Gold, Polished Yellow Gold, Polished Silver, Arch Bronze, JRS Bronze, Matte Black, Satin Silver, Satin Rose Gold and Satin Yellow Gold.
Please specify part number, inside dimension, color, sign mate-rial thickness, and desired inside depth when ordering. (1/8” standard depth under lens unless otherwise specified)
Prices are for frames up to 100 perimeter inches. Please request quote on larger frames. (2” minimum)
7/16”
.060 or .080Clear AcrylicLens
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
XTERIOR FRAMES
100
JRS FRAMES & HOLDERS
1/8” wall thickness.
Frames designed to accommodate materials with thicknesses of 1/16” or 5/16”.
Minimum size is 3” x 3”
Maximum size is 36” x 36”.
Anodized colors: Satin Yellow Gold or Satin Silver - hard coat finish adds durability to the wear of the frame material.
Mounting options: Double-sided tape, silicone adhesive, mechanically fastened (recommended) Mounting hardware is NOT included.
Holes provided upon request.
Always specifyinside dimension.
Four corner angles areincluded with frame.
Back ViewPN 3020
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
E-Z SIGN KITS
101
JRS FRAMES & HOLDERS
PartNo.
FrameSize
5166616651446144516961695149614951296129512461246181
6 1/8” x 6 1/8”6 1/8” x 6 1/8”4 1/8” x 4 1/8”4 1/8” x 4 1/8”6 1/8” x 9 1/8”6 1/8” x 9 1/8”4 1/8” x 9 1/8”4 1/8” x 9 1/8”1 3/4” x 9 1/8”1 3/4” x 9 1/8”1 3/4” x 4 1/8”1 3/4” x 4 1/8”8 1/2” x 11”
Signs/Each Sheet
1122111133881
Corner
RoundSquareRoundSquareRoundSquareRoundSquareRoundSquareRoundSquareSquare
PartNo.7500PaperP110
Description
Desk Base for 5129 & 6129Specify Frame Part No (sold in sets of 10)Partition Hanger
The 5000 series round and 6000 series square corner molded plastic frames are designed for quality interior signage. Each frame is molded in one of 7 matte colors: Pewter Gray, Almond, White, Brown, Arch Brown, Black and Medium Gray. All frames have a 1/2” outside depth, 1/8” thick walls and mounting holes for attaching to walls. The inside radius on the round corner frames is 5/16”
FRAMES
Each set includes 1 frame with lens, 1 sheet of perforated sign paper and a suctioncup tool.
7500 Base snaps into the 1 3/4” x 9 1/8” frame (either round orsquare) making a desk or counter unit. Base is 6”
Attach a frame to P110 for easy cubicle mounting.Adobe Illustrator or MS Word is needed to download templates.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
ARCHITECTURAL FRAMES IN MOLDED PLASTIC
102
JRS FRAMES & HOLDERS
PartNo.
InsideDimension
71998199716681667144814471438143716981697149814971298129712481248181
9 1/8” x 9 1/8”9 1/8” x 9 1/8”6 1/8” x 6 1/8”6 1/8” x 6 1/8”4 1/8” x 4 1/8”4 1/8” x 4 1/8”
4 1/8” x 13 1/8”4 1/8” x 13 1/8”6 1/8” x 9 1/8”6 1/8” x 9 1/8”4 1/8” x 9 1/8”4 1/8” x 9 1/8”1 3/4” x 9 1/8”1 3/4” x 9 1/8”1 3/4” x 4 1/8”1 3/4” x 4 1/8”
8 1/2” x 11”
Corner
RoundSquareRoundSquareRoundSquareRoundSquareRoundSquareRoundSquareRoundSquareRoundSquare
Square Only
The 7000 series round corner and 8000 series square corner molded plastic frames are designed for quality interior signage. Each frame is molded in one of 7 matte colors: PETER GRAY, MEDIUM GRAY, ALMOND, WHITE, BROWN, ARCH BROWN OR BLACK. All frames have a 1/2” outside depth, 1/8” thick walls and mounting holes for attaching to walls. The size of each frame is listed as an inside dimension and the inside radius on the rounded corner frames is 5/16”. Each frame is designed to accommodate all sign material from 1/16” to 1/8” thick, or it’s own plastic snap-in plate (see previous page).
Each frame size in both round or square corner is available with an .080 semi-flexible non-glare acrylic lens. Lenses are laser cut with small tabs that snap into frames. Lenses can be painted, screen printed, engraved or have tactile and braille attached to them. Each frame is supplied with a snap-in lens and a matte black backing insert.
Add a “L” in front of the part number to request a lens.
EX: L8199BL is a black 9 1/8” x 9 1/8” frame with lens.
See price list for current pricingand quantity discounts.
FRAMES WITH LENSES
All holders and frames can be combined for quantity discounts.
7500 BASE: snaps into the 1 3/4 x 9 1/8” frame (both round or square) making a desk or counter unit. Base is 6”
Custom colors available.Call for details.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
ARCHITECTURAL FRAMES IN MOLDED PLASTIC
103
JRS FRAMES & HOLDERS
PartNo.
InsideDimension
70298029
1 3/4” x 9 1/8”1 3/4” x 9 1/8”
Corner
RoundSquare
PartNo.
PlateSize:
73298329736683667399839973438343
1 3/4” x 9 1/8”1 3/4” x 9 1/8”6 1/8” x 6 1/8”6 1/8” x 6 1/8”9 1/8” x 9 1/8”9 1/8” x 9 1/8”4 1/8” x 13 1/8”4 1/8” x 13 1/8”
Corner
RoundSquareRoundSquareRoundSquareRoundSquare
Desk Bars are designed as a simple architectural nameplateholder or counter sign. They are 1” thick and have an insidedimension of 1 3/4” x 9 1/8” to accommodate our injectionmolded plate. The desk bar is also available in WHITE,PEWTER GRAY, ALMOND, BROWN, ARCH BROWNAND BLACK.
DESK BARS
Anodized black aluminum bracket conceals screws while mounting a double sided corridor frame. CORRIDOR FRAMES ARE CUSTOM AND NON-RETURNABLE.
CORRIDOR FRAMES WITH BRACKETS
See price list for current pricingand quantity discounts.
All holders and frames can be combined for quantity discounts.
ARCHITECTURAL FRAMES IN MOLDED PLASTIC have many uses and provide a quality, inexpensive solution to your interior signage needs. On this page are some examples of the many ways in which our Architectural Plastic Frames can be used.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
ARCHITECTURAL FRAMES IN MOLDED PLASTIC
104
JRS FRAMES & HOLDERS
Gray/GrayGray/BlackGray/WhiteGray/Arch Brown
Almond/BlackAlmond/BrownAlmond/Arch BrownAlmond/AlmondAlmond/White
Brown/BrownBrown/AlmondArch Brown/Arch BrownArch Brown/AlmondArch Brown/White
Black/BlackBlack/AlmondBlack/GrayBlack/WhiteRed/WhiteBlue/WhiteBurgundy/WhiteBurgundy/Gray
White/WhiteWhite/BlackBrushed Gold/BlackBrushed Silver/Black
Teal/WhiteTeal/GrayTeal/Almond
Mauve/WhiteMauve/GrayMauve/Almond
Injected Plastic Plates
MoldedPart No.
PlateSize
LaserPart No
7299829972668266724482447243824372498249722982297224822472698269
52996299526662665244624452436243524962495229622952246224526962696281
9 1/8” x 9 1/8”9 1/8” x 9 1/8”6 1/8” x 6 1/8”6 1/8” x 6 1/8”4 1/8” x 4 1/8”4 1/8” x 4 1/8”
4 1/8” x 13 1/8”4 1/8” x 13 1/8”4 1/8” x 9 1/8”4 1/8” x 9 1/8”1 3/4” x 9 1/8”1 3/4” x 9 1/8”1 3/4” x 4 1/8”1 3/4” x 4 1/8”6 1/8” x 9 1/8”6 1/8” x 9 1/8”
8 1/2” x 11”
Corner
RoundSquareRoundSquareRoundSquareRoundSquareRoundSquareRoundSquareRoundSquareRoundSquareSquare
Molded plates are 1/8” thick with a 1/16” reveal around the perimeter leaving a handsome border. Each plate is designed to snap in and out of respective frames for changeable signs, or can be permanently mounted with two-sided tape. Plates are molded in the same six colors as the frames and then are stamped with a tough durable matte finish suitable for hot stamping, vinyl letters or silk screening. For 2-ply engraving, 7 core colors and 13 surface colors can be com-bined for a quality contracting engraved plate.
LASERABLE ARCHITECTURAL PLATES
MOLDED PLATES FOR ARCHITECTURAL FRAMES
Plates in popular colors suitable for use with laser engravingequipment. Plates are 1/16” thick and are designed
to snap in and out of their respective frames.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
DESIGNER FRAMES in Molded Plastic
105
JRS FRAMES & HOLDERS
PartNo.
InsertDimension
912091289000
91229188916691449162914291489124
1 7/8” x 9 7/8”1 7/8” x 7 7/8”6” Desk Base for9128 and 9210 Frames11 7/8” x 11 7/8”7 7/8” x 7 7/8”5 7/8” x 5 7/8”3 7/8” x 3 7/8”5 7/8” x 11 7/8”3 7/8” x 11 7/8”3 7/8” x 7 7/8”1 7/8” x 3 7/8”
PartNo.
InsertDimension
922292889266922092429262
11 7/8” x 11 7/8”7 7/8” x 7 7/8”5 7/8” x 5 7/8”1 7/8” x 9 7/8”3 7/8” x 11 7/8”5 7/8” x 11 7/8”
Our DESIGNER FRAME SYSTEM is designed for quality interior signage. Several unique features offered by this system will make designing and mounting interior signage simple.
DOUBLE SIDED CORRIDOR FRAME WITH CORRIDOR BRACKET
See price list for current pricing and quantity discounts.
Corridor frames arecustom and
non-returnable.
All holders and frames can be combined for quantity discounts.
Ten sizes in six colors: Pewter Gray, White, Medium Gray, Almond, Brown and Black
Completely supports 1/16” and 1/8” material so that multiple plates can be used as mini-directories or divided sign messages.
Plates can be mounted with adhesive-backed 3M DUAL LOCK™ or Sign Snap so that they are tamper resistant but still removable with a suction cup.
Plates can be permanently mounted to inside of frames with adhe-sives or two-sided transfer tape.
Keyhole mounting for permanent or removable frames.
Pin system that mounts into a frame for hanging from fabric office partitions.
Base that snaps into a 9120 or 9128 frame for handsome desk sign.
Double-sided frames with corri-dor bracket. Corridor bracket mounts with two-piece bracket for concealed screws.
9128/9120
9000
Custom colorsavailable.
Call for details.
1/2” depth
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
DESIGNER 2 FRAMES in Molded PlasticJRS FRAMES & HOLDERS
106
PartNo.
Part #’s 3112 & 3113 are availablein black only.
InsertDimension
3120314031289000
31883166314431123113316831483124
1 7/8” x 9 7/8”3 7/8” x 7 7/8”1 7/8” x 7 7/8”6” Desk Base for3128 and 3120 Frames7 7/8” x 7 7/8”5 7/8” x 5 7/8”3 7/8” x 3 7/8”1 7/8” x 11 7/8” End Sec1 7/8” x 11 7/8” Mid Sec5 7/8” x 7 7/8”3 7/8” x 7 7/8”1 7/8” x 3 7/8”
PartNo.
InsertDimension
328832663220
7 7/8” x 7 7/8”5 7/8” x 5 7/8”1 7/8” x 9 7/8”
PartNo.
With 3112 & 3113 frame sections
InsertDimension
324232623222
3 7/8” x 11 7/8”5 7/8” x 11 7/8”11 7/8” x 11 7/8”
Our DESIGNER 2 FRAME SYSTEM is designed for quality interior signage. Several unique features offered by this system will make designing and mounting interior signage simple.
DOUBLE SIDED CORRIDOR FRAME WITH CORRIDOR BRACKET
Nine sizes in six colors: Pewter Gray, White, Medium Gray, Almond, Brown and BlackOne 12” expandable frame that can be extended by adding 2“ sections. Plate size starts at 3 7/8” x 11 7/8“ to any size in multiples of 2” sections.Completely supports 1/16” or 1/8“ material so that multiple plates can be used as mini-directories or divided sign messages.Plates can be mounted with adhesive-backed 3M DUAL LOCK™ or Sign Snap so that they are tamper resistant but still removable with a suction cup.Plates can be permanently mounted to inside of frames with adhe-sives or two-sided transfer tape.1/4” wide divider stripes are available in matching frame colors. These dividers can be used for directories or any sign that may require multiple plates. Must be glued or taped in place.Pin system that mounts into a frame for hanging on fabric office partitions.Keyhole mounting for permanent or removable frames.Base that snaps into a 3120 or 3128 frame for a handsome desk sign.Double-sided frames with corri-dor bracket. Corridor bracket mounts in two places with concealed screws.
Corridor frames arecustom and
non-returnable.
Two end pieces make 4” x 12” (3 7/8” x11 7/8” plate size). A 2” center sectionallows the frame to be increased by 2”increments with each additional section.
CUSTOM COLORS AVAILABLE. CALL FOR DETAILS.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
COHERENT WINDOW SERIES
107
JRS FRAMES & HOLDERS
Fabricated from aluminum with a styrene backer, Coherent Window Series is a simple, straight-forward and economical frame system that will accommodate a variety of inserts from paper to 1/16” material. Inserts are protected by our matte-clear lens. Standard anodized colors include: POLISHED SILVER, POLISHED ROSE GOLD, SATIN SILVER, MATTE BLACK AND POLISHED YELLOW GOLD. Special anodized colors include: ARCHITECTURAL BRONZE, JRS BRONZE, SATIN ROSE GOLD, AND SATIN YELLOW GOLD. *Spe-cial anodized colors require additional production time and have a 25% up charge.
Top/Bottom Square Rail: 3/8” face width and 5/16” outside depth.
Side Rails: 3/32” face width.
Designed to accommodate paper and up to 1/16” material.
1/16” Black Styrene Backer
Mounting Options: Double sided tape or screw mount. (Extra charges apply for screw mount application) Must specify when ordering. (Mounting hardware is NOT included)
Max rail length: 39”
Additional backer available (additional charges apply).
Technical Information:
Room Identification, Evacuation, Room Rates
Directional Signage/Directories
Personnel ID Signs
Department ID Signs
A solution for Banks, Financial Institutions, Call Centers, Office Facilities, Hospitals, Schools & Colleges, Libraries or Hotels.
Daily Changeable Menus.
Applications:
STANDARD FORMAT
PN 3575
Standard format of top and bottom, thicker rails will be manufactured unless otherwise specified. Specify inside height x width when order-ing. Large frames may require additional backer. Additional charges will apply.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
ENVIRONMENTALS COLLECTION
108
JRS FRAMES & HOLDERS
In our continuing effort to be a steward for the environment, we are introducing our Environmentals line of holders. Manufactured to our exacting standards for workmanship and quality from a special recycled aluminum billet that is an Environmentally Preferred Prod-uct, the Environmentals will help us as we strive to provide sustain-able product solutions for your signage needs while caring for the future as well.
Environmentals are available in 3 anodized finishes: SATIN SILVER, ETCH BLACK, SATIN YELLOW GOLD.
Room Identification, Evacuation, Room Rates
Directional Signage/Directories
Personal ID Signs
Departmental ID Signs
A solution for Banks, Financial Institutions, Call Centers, Office Facilities, Hospitals, Schools & Colleges, Libraries or Hotels.
Custom lengths are available.
All holders and frames can be combined for quantity discounts.
SEE PRICE LIST FOR CURRENT PRICING ANDQUANTITY DISCOUNTS.
Applications:
PN E28
PN E37
PN E36
PN E38
PN E48
Wall Holders
Desk Holders
PartNo.
Size Available LengthsA. B.
E28E29E36E37E49
E38
E25E70E48
1”1 1/2”
2”3”4”
2 1/2”
1”1 1/2”
2”
1/16”1/16”1/16”1/16”1/16”
1/8“
1/16”1/16”1/16“
4”4”4”4”4”
6”6”6”6”6”
8”8”8”8”8”
10”10”10”10”10”
12”12”12”12”12”
36”36”36”36”36”
6”7 1/2”
8”
7”8”10”
8”10”12”
10”
36”12”10”5”4”3”2”
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
ACCESSORIES
109
JRS FRAMES & HOLDERS
B09010SUCTION CUPHANGERHas metal hanger for hangingsigns on windows and glassdoors. 1 3/4” diameter.
Sign panels and lensescan be easily inserted andremoved using convenientsuction cups.
B080001 3/16”SUCTIONCUP
P110CLEAR PLASTIC HANGER
PartitionBrackets
Mounts signs over the top of officepartitions. 3 1/2” long, 2 1/8” insidedimension, 1 7/8” high. 1/8” standardthickness.
Custom acrylic sign holders and partition brackets are available in both 1/16” and 1/8” material. Choose from any of our standard brack-ets we can custom fabricate to your specifications. Please supply a drawing with size specifications, material thickness and quantity. There is a minimum quantity of 25 on custom fabrication. Fax drawing for quote.
FRAME DIVIDERSSection off frames for
multiple plates.Custom sizes available,
call for pricing.
Dividers are available in 2”,4”, 6”, 8”, 10”, 12”.
Must be glued or taped in.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
B09100
B09200
WIRE CLIPSAvailable in 6” and 3 1/2” lengths.
Insert wire clip through holes located at top of the frame. Work around bend in wire while gentlyapplying pressure upwards.Snap wire in place betweenframe and small peg. Applyadhesive inside frame overwire to secure permanentwire placement.
*Fits conveniently intoDesigner 2 Frames.
ACCESSORIES
110
JRS FRAMES & HOLDERS
B09450
B09400
B09500 Sign Snap
LOOPED-ENDCABLESB09315Featuring 1/16”diameter zinc-platedwire rope 12” longwith 1” looped ends.Holds up to 30 lbs.
B09400 and B09450 can becombined for quantity breaks.
Includes top, bottom,and adhesive.1/2” x 12” complete.
Double-sided frames areeasily suspended from T-bar
ceilings by combining “v” clips and looped-end cables.
“V” CLIPB09310
For mounting to T-barin suspended ceilings
and over double-sidedArchitectural Frames.
Holds up to 25 lbs.
Adhesive backed B09400 engageswith B09450 giving an audible snapto ensure positive locking.
1 1/4”
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
111
COLORS AND FINISHESJRS FRAMES & HOLDERS
Anodized Aluminum Colors
Please refer to each product category for color availability.Color chain available upon request.
Plastic Frames
Powder Coat Finishes
PolishedRose Gold
PolishedSilver
PolishedYellow Gold
JRS Bronze
Matte Black
SatinRose Gold
Satin Silver
SatinYellow Gold
Arch Bronze
Medium Gray
Pewter Gray
Black
White
Medium Gray
Black
Brown
Almond
White
Arch Brown
Pewter Gray
Colors printed here arerepresentative of actualcolors; however, due to
the manufacturingprocess, colors may vary
slightly. We have stringentquality control to ensurethat all colors are within
a tolerable range.
Almond
Arch Brown
Brown
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
112
SALES BROCHURES & KITSJRS FRAMES & HOLDERS
SALES KITS
Kit #1 (SK1): Full Line Sample KitOur full line kit with over 25 samplesrepresenting the various productcategories that we offer.
Kit #2 (SK2): Metal Frame KitFeatures a cross section from our alum-inum frame lines including: Premier,Premier Plus, Architectural Aluminum, Euro, Curves, Deco Bars, Frame & Lens.12 frames in total and color key chain.
Kit #3 (SK3): Plastic Frame KitFeatures a selection of frames from ourversatile and affordable plastic framelines which include: Architectural PlasticFrames and Plates, Designer, Designer2and EZ Sign Kits. 12 frames in total anda color key chain.
Kit #4 (SK4): CurvesAdded by popular demand, this samplekit features our Curves frame system. 12 frames in total and color key chain.
Kit #5 (SK5): Sampler KitChoose 10 items from any of our framelines. Key chains and brochures included.
Traditional FramesB100
Architectural Aluminum FramesB101
Architectural Plastic FramesB102
Premier FramesB103
Designer Plastic FramesB104
Premier PlusB105
Decorative Bars and RailsB106
Euro Sign SystemB107
Aluminum Frames w/ LensesB108
Curves FramesB109
Flex FramesB110
EZ SignsB111
Coherent Window SeriesB114
EnvironmentalsB115
Xterior FramesB112
JRS AccessoriesB113
Prestige CollectionB116
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
1 Day2 Days3 Days4 Days5 Days6 Days7 Days
1 Day2 Days3 Days4 Days5 Days6 Days7 Days
1 Day2 Days3 Days4 Days5 Days6 Days7 Days
Shipping fromCalifornia Warehouse
Shipping fromFlorida Warehouse
Shipping fromOklahoma Warehouse
1 DAY4 DAYS
2 DAYS5 DAYS
3 DAY6 DAYS
7 DAYS
FREIGHT, RETURNS AND LIMITED WARRANTYTERMS AND CONDITIONS
TERMS: Minimum order $25.00. All orders will be shipped COD until credit is established. Standard terms are Net 30 days unless otherwise specifically noted. Accounts that are past due will be shipped COD. We accept VISA, MasterCard, American Express and Discover credit cards.
RETURNS: All order discrepancies must be reported within 30 days. Damage or loss incurred during shipping must be noted with the carrier upon receipt of the shipment and reported immediately to Able or no credit will be offered for said damage or loss. Only stock items and colors may be returned due to your ordering error and will incur a minimum 25% restocking charge. All merchandise must be returned in resalable condition. All custom sizes and colors of holders, frames and plastic are non-returnable. No returns will be accepted without proper authorization from a Able representative.
LIMITED WARRANTY: Able Engravers warranty is limited to product replacement only, and as such, does not extend to costs of labor, loss, or other incidental costs. Seller makes no other warranties whatsoever. Seller disclaims and excludes all other express or implied warranties, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE CONCERNING THE PRODUCTS. In no event will Seller’s liability exceed the paid purchase price of the product. No other remedy shall be available to buyer and that in no event shall Seller be liable for any incidental or consequential damages.
CREDIT REFERENCES: It is our policy not to give Credit References unless we have SIGNED authorization from you. For our protection as well as yours, this policy is strictly enforced. With your permission, we will respond to those vendors that include a prepaid, self-addressed envelope or provide a toll-free fax number or email address. If you would like a copy of your “Credit History” report, please let us know.
8 0 0 . 3 8 3 . 5 1 8 5w w w . A b l e-E n g r a v e r s . c o m
WWW.A B L E-E N G R A V E R S.COMABLE ENGRAVERS, INC. FOR ENGRAVERS. BY ENGRAVERS. FOR OVER 40 YEARS.
ABLE ENGRAVER'S9521 N. Kedvale Ave. Skokie, IL 60076800.383.5185
©2014 ABLE ENGRAVER'S