ENGINEERING PLASTICSDSM Excellent flow - long thin walls High HDT - soldering High toughness - pin...

ENGINEERING PLASTICSDSM

• Excellent flow- long thin walls

• High HDT- soldering

• High toughness- pin insertion

• High strength- pin

retention

Competition: LCP

Memory module connectors: DIMM, RIMM, DDR-DIMM: TE250F8, 46HF5040

Stanyl applications: E&E


Mobile phone connectors (battery charger, ear plug): TE250F6

• Excellent flow- fine pitch


• High toughness- pin insertion- durability (plug in/out)

• Low system costs- LCP

replacement



CPU sockets (ZIF PGA, BGA): 46HF5040, TS250FK33

• Excellent flow- fine pitch

• Low warpage- assembly


• Low system costs- LCP replacement




Wire-wound components/bobbins: TE200F6, TE250F6/8

• High toughness- less reject (winding)

• High HDT- soldering- encapsulation

• High stiffness at high T• Low creep • Excellent flow• Dielectric strength• UL1446 classification

- insulation system

Competition: PPS, PPA, PBT, PA66, thermosets


Stanyl applications: automotive

Automotive signalling lamps: TW200F6

• High HDT- operating T

• High toughness- snap-fit

• Good heat stability- durability

• Laser markability


Intercooler endcaps: TW200F6, TW200F8

• High stiffness at high T- 160 - 220 °C

• Good fatigue, low creep - safety, durability

• Good heat stability- safety, durability

• High toughness- assembly

• Fast crystallisation- high

productivity

Competition: PPA, PA66, aluminium




Adjustable clutch rings: TW200F6

• High stiffness at high T• Low creep at high T

- durability- dimensional stability

• Low post shrinkage- narrow dimensional tolerances

• More comfort• Reduction maintenance/costs

Stanyl unique


Air intake manifolds: TW200F6, TW200F8


• High stiffness at high T- 160 - 220 °C

• Good heat stability- safety, durability

• Fast crystallisation- high

productivity• Weight reduction

- fuel efficiency• Part integration/complex

designs

Competition: aluminium, PPA, PA66


Mechanical torsion damper: TW341

• High stiffness at high T- peak T 280 °C

• Low creep at high T- safety, durability

• Low wear, good fatigue- safety, durability

Competition: PPS, PA66 failed



• Low wear, good fatigue - safety, durability

- life time: 3-7 x PA66

• High stiffness at high T - full plastic part - cost reduction

• Good oil resistance at high T - durability

Competition: PA66- metal

Chain tensioners: TW341



Chain tensioners: TW341, TW200F6

• Low wear, good fatigue - safety, durability

• High stiffness at high T - full plastic part - cost reduction

• Good oil resistance at high T - durability

Competition: PA66-metal




Starter motor gears: TW200F8

• Low wear, good fatigue- safety, durability

• High toughness

• High stiffness at high T- diesel engines

• Good oil resistance at high T

- durability

• Weight and noise reduction

Competition: PA66-metal



Positioning switch: TW200FM33

• Low creep at high T- safety,

durability

• High stiffness at high T

• Low warpage

Competition: PPS, PA66


Stanyl applications: general industries

Crank shaft saddle: TW200F6

• High stiffness at high T - metal replacement

• Weight reduction

• Parts integration

Competition: PA66


Cooking spatulas: TE300


• Design freedom-metal/wood replacement- hygiene

• High HDT- hot oil contact

• Oil resistance - hot oil contact

• Food approval

Competition: PA66


Gas curler parts, TW200F6

• High HDT- high peak T

• Surface appearance

• Colour matching



Thermostatic control for water kettle: TE250F6


• High HDT- operating T = 275 °C

• High toughness- snap-fit function

• No flash- no after

treatments

• Flammability- safety

Competition: PPS

ENGINEERING PLASTICSDSM Excellent flow - long thin walls High HDT - soldering High toughness - pin...

Documents

Transcript of ENGINEERING PLASTICSDSM Excellent flow - long thin walls High HDT - soldering High toughness - pin...