ENGINE POWERED FORKLIFT TRUCK

Offers different engine selectionwith low emission: ISUZU, YANMARCUMMINS, CHINESE

Engin cover with gas-filled cylindersand sound absorbing material.

Up set exhaust.

Lowering speed safety valve.

The optional of cabin with heater.

ADVANTAGES:

Stability -Cab design by SIP point , conform to EN- ISO 5353, ensure compartment with great comfortable and fatigue- free operating. -Leak-free O-rings imported from Japan NOK face seal fittings reduce leaks -Drive axle and steering axle , transmission made by TCM technology , float type structure achieve a flexible connection between engine and frame , reduce vibrations greatly. JAPAN SHIMADSU type hydraulic pump with low noise -The cylinder have dual safety system --- with lowering safety valve and lowering limited valve.

Safety -Advanced multifunction LCD/digital display provides fast and accurate Monitoring truck status. -The cylinder offers new design by dual safety system --- with lowering safety valve and lowering limited valve. -The electric F/R lever with neutral safety start system. -An intelligent sensor and buffer monitoring system: with safty check valve to absorb the mast drop speed

automatically to avoid crashing the floor and damaging goods.Ergonomics & Efficiency -Wide view mast, clear visibility. -Cowl-mounted hydraulic levers design offers big operation space. -Adjustable tilt steering column offers the most comfortable operator position. -The optional of the magnetic electric F/R control lever ,simple for operation and less efforts. -Low noise <82AB(A) : sound absorbing material mounted within the front engine cover, with air intake system on the back pillars of overhead guard maximum reduces the noise. -New designed aluminum structural radiators.

Easy Maintenance -Insulated engine cover with gas-filled cylinders with automatic locking device to assist in opening and preventing the cover from unexpected closing. The cover can opens up to 78-90 degrees. -Steering axle uses the traverse tanks. The compact construction with large open space, easy to maintain. -Use integral sealed electric circuitry. Optimized the control system and easy maintenance.

-Floor board are easily removed, reduce time for quick service assess.

KFD15/20Diesel Forklift

KFG15/20Gasoline Forklift

Multifunction LCD digital display

Model KFD15 KFD20 KFG15 KFG20

Power diesel diesel gasoline gasoline

Operator type seat seat seat seat

Capacity/rated load Q(kg) 1500 2000 1500 2000

Load centre distance c(mm) 500 500 500 500

Lift height h3(mm) 3000-6000 3000-6000 3000-6000 3000-6000

Load distance,centre of drive axle to fork

x(mm) 395 395 395 395

Wheelbase y(mm) 1580 1580 1580 1580

Service weight kg 2680 3200 2680 3200

Axle loading,laden front/rear kg 3280/900 4576/624 3280/900 4576/624

Axle loading,unladen front/rear kg 1183/1497 1280/1920 1183/1497 1280/1920

Tyres type pneumatic/solid pneumatic pneumatic/solid

Tyre size,front φ590X179/φ577X162

Tyre size rear φ470X137/φ461X127

Wheels,number front rear(x=driven wheels) 2x2 2x2/4x2 2x2 2x2/4x2

Tread,front b10(mm) 890 890 890 890

Tread,rear b11(mm) 920 920 920 920

Tilt of mast/fork carriage forward/backward

Grad 6°~12° 6°~12° 6°~12° 6°~12°

Height,mast lowered h1(mm) 2015-2610 2015-2610 2015-2610 2015-2610

Free lift h2(mm) 0 0 0 0

Height,mast extended h4(mm) 4067-7067 4067-7067 4067-7067 4067-7067

Height of overhead guard(cabin) h6(mm) 2030 2030 2030 2030

Seat height/stand height h7(mm) 1043 1043 1043 1043 Overall length l1(mm) 3401 3445 3401 3445

Length to face of forks l2(mm) 2331 2375 2331 2375

Overall width b1(mm) 1100 1100 1100 1100

Fork dimensions s/e/l(mm) 35/100/1070 40/120/1070 35/100/1070 40/120/1070

Fork carriage DIN 15173,class/type A.B

2A 2A 2A 2A

Fork-carriage width b3(mm) 1088 1088 1088 1088

Ground clearance,laden,below mast

m1(mm) 105 105 105 105

Ground clearance,centre of wheelbase

m2(mm) 115 115 115 115

Aisle width for pallets 1000x1200 crossways

Ast(mm) 3700 3740 3700 3740

Aisle width for pallets 800x1200 lengthways

Ast(mm) 3500 3540 3500 3540

Turning radius Wa(mm) 1885 2140 1885 2140

Internal turning radius b13(mm) 750 850 750 850 Travel speed,laden/unladen Km/h 0~16 0~16 0~16 0~16

Lift speed,laden/unladen m/s 480 480 480 480

Lowering speed,laden/unladen m/s <600 <600 <600 <600

Max.drawbar pull,laden/unladen N 15120 15120 15120 15120

Max.gradeability, laden/unladen % 20/27 20/27 20/27 20/27

Acceleration time,laden/unladen s 3/4 3/4 3/4 2/3

Engine manufacturer / type 490BPG/C240PKJ/4TNE92 K21/491

power acc. To ISO 1585 Kw 32/34.3/34.7 31/41

Rated speed R/Min 2650/2500/2450 2300/2500

Type of drive control mechanical/hydraulic hydraulic

Operating pressure for attachments

bar 17 17 17 17

Sound level at the driver's ear acc.to DIN 12053

dB(A) <82 <82 <82 <82

ENGINE POWERED FORKLIFT TRUCK

KFG35

KFD25Diesel Forklift

Gasoline Forklift

KFD30KFD35

KFG25KFG30

Wide view mast with best visibility. Engine cover with gas-filled cylinders andsound absorbing material.

Cowl mounted hydraulic lever offers largeoperation space.

Electric F/R control lever with naturalstarting system.

Low height access step with wide non slipplate for easy entry and exit.

The optional of semi or full suspension seatwith safety belt and arm rest.

39/202, Maryland Corner, Sion (East), Mumbai - 400022. India. Tel.: +91 22 24090563 Fax.: +91 22 24096832 E-mail: info@kompressindia.com Website: www.kompressindia.com

Model KFD25/FG25 KFD30/FG30 KFD35/FG35

Power Diesel Gasoline Diesel Gasoline Diesel

Operator type seat seat seat

Capacity/rated load Q(kg) 2500 3000 3500

Load centre distance c(mm) 500 500 500

Lift height h3(mm) 3000-6000 3000-6000 3000-6000

Load distance,centre of drive

axle to fork x(mm) 485 485 485

Wheelbase y(mm) 1700 1700 1700

Service weight kg 3980 4350 4457

Axle loading,laden front/rear kg 5702/778 6468/882 7002/955

Axle loading,unladen front/rear kg 1592/2388 1740/2610 1783/2674

Tyres type pneumatic/solid pneumatic/solid pneumatic/solid

Tyre size,front mm φ676X190/ φ657X172 φ710X220/

φ695X218

φ710X220/

φ695X218

Tyre size rear mm

φ540X160/

φ527X150

φ590X175/

φ577X162

φ590X175/

φ577X162

Wheels,number front

rear(x=driven wheels) 2x2/4x2 2x2/4x2 2x2/4x2

Tread,front b10(mm) 970 1000 1000

Tread,rear b11(mm) 970 970 970

Tilt of mast/fork carriage forward/backward

Grad 6°~12° 6°~12° 6°~12°

Height,mast lowered h1(mm) 2040-2654 2070-2684 2070-2684

Free lift h2(mm) 0 0 0

Height,mast extended h4(mm) 4067-7067 4250-7250 4250-7250

Height of overhead guard(cabin) h6(mm) 2060 2090 2090

Seat height/stand height h7(mm) 1052 1064 1064

Overall length l1(mm) 3650 3750 3860

Length to face of forks l2(mm) 2580 2680 2790

Overall width b1(mm) 1150 1205 1225

Fork dimensions s/e/l(mm) 40/130/1070 45/130/1070 45/140/1070

Fork carriage DIN

15173,class/type A,B 2A 3A 3A

Fork-carriage width b3(mm) 1160 1200 1200

Ground clearance,laden,below mast

m1(mm) 125 135 135

Ground clearance,centre of

wheelbase m2(mm) 135 150 150

Aisle width for pallets 1000x1200 crossways

Ast(mm) 3790 3950 4000

Aisle width for pallets 800x1200 lengthways

Ast(mm) 3590 3750 3800

Turning radius Wa(mm) 2190 2350 2400

Internal turning radius b13(mm) 875 902 902

Travel speed,laden/unladen Km/h 0~18 0~20 0~20

Lift speed,laden/unladen m/s 460 450 400

Lowering speed,laden/unladen m/s <600 <600 <600

Max.drawbar pull,laden/unladen N 15120 17120 21600

Max.gradeability,laden/unladen % 20/27 20/27 20/27

Acceleration time,laden/unladen s 3/4 2/3 4/5 3/4 4.5/5.5

Engine manufacturer / type 490BPG/C240

/4TNE92 K21/K25/491

490BPG/C240/4JG2 /4TNE92/4TNE98

K25/491 490BPG/498BPG/

4JG2/4TNE98

Engine power acc. To ISO 1585 Kw 32/34.3/34.7 31/37.4/41 37/34.3/44.2/

34.7/44.3 37.4/41

37/36.8/44.2/

44.3

Rated speed R/Min 2650/2500/2450 2300/2300/2500 2650/2500/2450/ 2450/2300/2500

2300/2500 2650/2400 /2450/2300

Type of drive control mechanical/hydraulic mechanical/hydraulic mechanical/hydraulic

Operating pressure for attachments

bar 16.5 16.5 16.5

Sound level at the driver's ear dB(A) <82 <82