Enerpac Hydraulic Presses
Transcript of Enerpac Hydraulic Presses
148
JFB
DC
GA J
E
H
K
K
C
D
G
B
F
J
EH
A
148 www.enerpac.com
Enerpac Hydraulic Presses are available
in a wide variety of standard capacities and
configurations, or you can “build your own”
with the easy-to-use matrix.
The press frames are a welded construction
for maximum strength and durability, and when
combined with the power of high-pressure
hydraulics, will provide years of safe and
dependable service in your workshop.
Enerpac press capacities range from 10-ton to
200-ton and are available in Bench, C-Frame,
Arbor, H-Frame and Roll-Frame models.
Enerpac Hydraulic Presses
These press features increase productivity and broaden the range of applications:
Standard on many Enerpac IP Presses, the exclusive Hydra-Lift™ offers effortless adjustment to the press daylight by use of a hydraulic lift.
Easy horizontal cylinder position is achieved with the unique “roller-head” cylinder mounting block, standard on most Enerpac IP Presses.
Optional “V-blocks” for positioning of complex parts are designed with high-strength steel for long life.
149
J
F
B
D
CG
A
J
E
H
JFB
DC
GA J
E
H
JFB
DC
GA J
E
H
▶
▶
▶
▶
▶
▶
▶
▶
▶
150
154
156
156
156
158
159
160
161
10-200
50-200
5-20
10-30
10
10-200
10-200
5
1-100
IP
IPR
A
A
AIP
TM
LH
IP
www.enerpac.com
Press Section Overview
H-Frame Presses
Roll Frame Presses
C-Clamp Presses
Arbor Presses
Bench Frame Press
Press AccessoriesPress Speed Chart
Custom Built Presses
Tension Meter
Load Cells
Custom Hydraulic Presses
Capacity(tons)
Press Type and Functions Series Page
▼
150 www.enerpac.com
158
158
158
153
158
IP-Series, H-Frame Presses
• Quality welded frame for maximum strength and long life• Exclusive “Hydra-Lift™” bed for effortless adjustment
of the vertical daylight (10-ton models are manual)• Roller head design is standard to allow movement and
locking of the cylinder from side to side (10-ton, 25-ton and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package
Press shown: IPE-5060
Setting the Industry Standard
Cylinder Mounting Block
Allows cylinder mounting into a press frame, while also allowing side to side adjustment of cylinder position.
Page:
Hydra-Lift™
Allows easy, effortless daylight adjustment. Standard on most H-Frame presses.
Page:
Pump Mounting Bracket
Heavy-duty steel brackets allow mounting of one of the Enerpac Power Sources to power your press.
Page:
Gauge Included
All standard press models include a gauge and gauge adaptor, matching the press capacity.
Page:
◀ An Enerpac H-Frame press quickly removes the shaft from this assembly.
V-Blocks
These optional V-Blocks are designed for easy fixturing of round stock and other non-uniform materials. Featuring precise fit into the press bolster.
Page:
151
158
H-Frame Presses
Man. Man.Elec. Air Elec.
Stroke
(in)
Speed
(sec/in)*
Power Source Press ModelNumber
Maximum Vertical Daylight
(in)
Maximum Bed
Width
(in)
PressCapacity
(tons)
Rapid Advance
PressingType Valve
Cylinder
IPSeries
Capacity:
10-200 tonsMaximum Daylight and Width:
54.50 & 48.00 inchesMaximum Operating Pressure:
10,000 psi
▼ QUICK SELECTION CHART For more technical information see next page.
* {--} Speed in strokes per inch plunger travel
Cylinder Types
= Single-acting,
Spring Return
= Double-acting, Hydraulic Return
Ordering Variations
Any variations to a listed part number must be ordered as two separate items. For example,
if you need a different voltage electric pump, please order from the modular matrix on page 159 and the electric pump from the modular matrix on page 99 (electric) or page 111 (air).
Any questions should be directed to our Technical Service Department.
Page:
0.902.20{4}{2}
2.201.50.70
5.20{5}.60.90{7}
1.021.00{2}
{11}2.901.001.00{2}
1.901.90{3}
1.90{3}
2.203.10
6.7013.40{15}{15}
13.4015.407.70
30.90{34}
43.009.80{34}
11.0474.00{38}{73}
28.9022.2011.00{38}
41.2020.60{70}
20.60{70}
15.4022.10
•••
••••
•••••
•••
40.0040.0040.0040.0040.0054.5054.5054.5054.5054.5054.5054.5048.5648.5648.5648.5648.5648.5648.5648.5642.5042.5042.5042.5042.5048.5048.50
IPE-1215IPA-1220IPH-1240IPH-1234IPA-1244IPE-2505IPE-2510IPA-2520IPH-2531IPA-3071IPE-3060IPH-3080IPE-5010IPA-5021IPH-5030IPH-5031IPE-5005IPA-5073IPE-5060IPH-5080IPA-10023IPE-10010IPH-10030IPE-10060IPH-10080IPE-15065IPE-20065
18.6318.6318.6318.6318.6329.0029.0029.0029.0029.0029.0029.0028.7528.7528.7528.7528.7528.7528.7528.7535.0035.0035.0035.0035.0048.0048.00
10
25
30
50
100
150200
••
•••
•••
••••
•
••
•
•
•
•
•
•
••
••
•
•
••
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
••
10101010106
141414141414136666
131313101010136
1313
••••••
•••
•
•••••
••
•
•
152 www.enerpac.com
666
32326666
32323266666
323232666
32323232
8410870721088296108721059672961057272821109672110967296729696
IP-Series, H-Frame Presses
A
(min)
A
(max)
B C D E
Press ModelNumber
PressCapacity
(tons)
H-Frame Press Dimensions (in)PumpModel
Number
◀ For full features see page 137.
Page:Page:
CylinderModel
Number
▼ The moveable “cylinder mounting block” allows the user to quickly adapt the press to a specific job.
IPE-1215IPA-1220IPH-1240IPH-1234IPA-1244IPE-2505IPE-2510IPA-2520IPH-2531IPA-3071IPE-3060IPH-3080IPE-5010IPA-5021IPH-5030IPH-5031IPE-5005IPA-5073IPE-5060IPH-5080IPA-10023IPE-10010IPH-10030IPE-10060IPH-10080IPE-15065IPE-20065
10
25
30
50
100
150200
PEM-1201BXA-12P-392P-84
XA-12VPUJ-1200B
ZE3310SB-NXA-12P-80
PAM-1042ZE3410SB-N
P-84ZE4320SB-N
PAM-1022P-462P-80
PUJ-1200BZA4408MX
ZE4420SB-NP-464
ZA4208MXZE4320SB-N
P-462ZE4420SB-N
P-464ZE5420SG-NZE5420SG-N
RC-1010RC-1010RC-1010RR-1010RR-1010RC-256
RC-2514RC-2514RC-2514RR-3014RR-3014RR-3014RC-5013RC-506RC-506RC-506RC-506RR-5013RR-5013RR-5013
RC-10010RC-10010RC-10010RR-10013RR-1006
RR-15013RR-20013
40.0040.0040.0040.0040.0054.5054.50 54.50 54.50 54.50 54.50 54.50 48.5648.56 48.56 48.56 48.56 48.56 48.56 48.56 42.5042.50 42.50 42.50 42.50 48.5048.50
2.442.44 2.44 2.44 2.44 7.007.007.007.007.007.007.007.067.067.067.067.067.067.067.067.007.007.007.007.00
12.5012.50
––––––––––––
18.7618.7618.7618.7618.7618.7618.7618.7620.0020.0020.0020.0020.0028.0028.00
46.7546.7546.7546.7546.7557.0057.0057.0057.00 57.0057.0057.0054.0054.0054.0054.0054.0054.0054.0054.0051.0051.0051.0051.0051.0054.5054.50
5.005.005.005.005.00
11.8811.8811.8811.8811.8811.8811.8810.3810.3810.3810.3810.3810.3810.3810.3811.6911.6911.6911.6911.6910.0010.00
18.6318.6318.6318.6318.6329.0029.0029.0029.0029.0029.0029.0028.7528.7528.7528.7528.7528.7528.7528.7535.0035.0035.0035.0035.0048.0048.00
153
L
KG
J F
E
M
C
H
D
B
N
131
158
H-Frame Presses
Weight
(lbs)
F G H J K L M N
Press ModelNumber
H-Frame Press Dimensions (in)
IP Series
Capacity:
10-200 tonsMaximum Daylight and Width:
54.50 & 48.00 inchesMaximum Operating Pressure:
10,000 psi
H-Frame Press Gauges
All standard press models include a gauge and gauge adaptor, matching the press capacity:
For more information on gauges, please refer to the System Components section.
Page:
Press Capacity
(tons)
Adaptor Model Number
Gauge Model Number
Hydra-Lift™
Ordering Variations
Any variations to a listed part number must be ordered as two separate items. For
example, if you need a different voltage electric pump, please order from the modular matrix on page 159 and the electric pump from the modular matrix on page 99 (electric) or page 111 (air).
Any questions should be directed to our Technical Service Department.
Page:
A (m
ax.)
A (min.)
IPE-1215IPA-1220IPH-1240IPH-1234IPA-1244IPE-2505IPE-2510IPA-2520IPH-2531IPA-3071IPE-3060IPH-3080IPE-5010IPA-5021IPH-5030IPH-5031IPE-5005IPA-5073IPE-5060IPH-5080IPA-10023IPE-10010IPH-10030IPE-10060IPH-10080IPE-15065IPE-20065
24.8824.8824.8824.8824.8840.5040.5040.5040.5040.5040.5040.5042.7542.7542.7542.7542.7542.7542.7542.7551.0051.0051.0051.0051.0067.1767.17
–––––
4.004.004.004.004.004.004.005.005.005.005.005.005.005.005.006.756.756.756.756.759.129.12
–––––
13.2513.2513.2513.2513.2513.2513.258.758.758.758.758.758.758.758.758.758.758.758.758.753.093.09
29.7529.7529.7529.7529.7530.0030.0030.0030.0030.0030.0030.0036.0036.0036.0036.0036.0036.0036.0036.0036.0036.0036.0036.0036.0044.0044.00
4.254.254.254.254.255.255.255.255.255.255.255.257.257.257.257.257.257.257.257.258.758.758.758.758.7513.1213.12
7.447.447.447.447.4410.6910.6910.6910.6910.6910.6910.6914.3814.3814.3814.3814.3814.3814.3814.3817.2517.2517.2517.2517.2521.8521.85
35.0035.0035.0035.0035.0026.5026.5026.5026.5026.5026.5026.5030.7530.7530.7530.7530.7530.7530.7530.7533.1333.1333.1333.1333.1347.7547.75
52.0052.0052.0052.0052.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0090.0090.00
298160158189163605697610620684722664
1,040968968926930
1,0571,0511,0031,6501,7221,6561,7431,6653,9063,906
GF-10PGF-20PGF-835PGF-50PGF-871PGF-200PGF-200P
10253050
100150200
GA-2GA-2GA-3GA-2GA-3GA-3GA-3
▼
154 www.enerpac.com
33 33 33
9696 96
158
158
158
158
• Qualityweldedframeformaximumstrengthandlonglife• Framerollseasilyonfoursteelrollerbearings• Hydraulicclampcylinderslockframeintoposition• Exclusive“Hydra-Lift™”bolsterforeffortlessadjustment
oftheverticaldaylight• Standardrollerheaddesignallowsmovementofthe
cylinderfromsidetoside• AllmodelsintheQuickSelectionCharthavebeen
matchedtoapump,cylinder,hosesandgauge, offeringthecompletepackage
• RollFramedesignfeaturesastationarybedwith theabilitytosupportheavyloads
Shown: IPR-10075
IPR-Series,RollFramePresses
Cylinder,Double-ActingHydraulicReturn
PressModelNumber
Vertical Daylight
A (in)
HorizontalDaylight
E(in)
PressCapacity
(tons)
ModelNumber
Stroke
(in)
RapidAdvance
Pressing
Speed
(sec/in)
PumpModel Number
TheOneandOnly
Page: Page:
CylinderMountingBlock
Allows cylinder mounting into a press frame, while also allowing side to side adjustment of cylinder position.
Page:
PumpMountingBracket
Heavy duty steel brackets to allow conversion to one of the Enerpac Power Sources to power your press.
Page:
Hydra-Lift™
Allows easy, effortless daylight adjustment.
Page:
OptionalV-Blocks
These V-Blocks, 200 ton only, are designed for easy fixturing of round stock and other non-uniform
materials. Featuring precise fit into the press bolster.
Page:
minimum maximum
37.1241.2851.00
6.006.2811.00
IPR-5075IPR-10075IPR-20075
28.7535.0048.00
50100200
RR-5013RR-10013RR-20013
ZE4420SB-NZE5420SG-NZE5420SG-N
13.1313.1313.00
•••
1.01.53.1
11.110.322.1
155
AB
CM
K
N
GJ H
L
E
F
D
131
158
Roll Frame Presses
Weight
(lbs)B C D F G H J K L M N
Press ModelNumber
Roll Frame Press Dimensions (in)
IPR Series
Capacity:
50-200 tonsMaximum Daylight and Width:
51.00 & 48.00 inchesMaximum Operating Pressure:
10,000 psi
Ordering Variations
Any variations to a listed part number must be ordered as two separate items. For
example, if you need a different voltage electric pump, please order from the modular matrix on page 159 and the electric pump from the modular matrix on page 99 (electric) or page 111 (air).
Any questions should be directed to our Technical Service Department.
Roll Frame Press Gauges
All standard press models include a gauge and gauge adaptor, matching the press capacity:
For more information on gauges, please refer to the System Components section. Page:
Press Capacity
(tons)
Adaptor Model Number
Gauge Model Number
Page:
▼ An IPR-20075 Roll Frame Press is used to remove a large shaft from this pillow-block assembly. The Roll Frame design allows this heavy part to be safely loaded with an overhead crane.
IPR-5075IPR-10075IPR-20075
20.7126.5038.75
38.2538.0036.75
10.388.7510.00
36.7545.0064.00
5.005.759.12
55.9263.1984.63
8.008.008.00
10.6310.6315.00
30.0032.0036.00
112.96118.94125.96
1,9613,8497,869
64.0066.0086.50
GF-50PGF-871PGF-200P
GA-2GA-3GA-3
50100200
▼
156 www.enerpac.com
C-Clamp, Arbor and Bench Frame Presses
C-Clamp Press• 5, 10 and 20 ton capacity • Operational in all positions
Arbor Press• Foot mounting holes for horizontal or vertical positioning• Machined work surfaces for easier fixturing• Slotted back to simplify loading and unloading of
longer parts
Bench Frame Press • Cylinder mounting adaptor allows lateral
positioning along rails• Mounting holes for easy mounting to fixed surface
Shown from left to right: A-220, A-330 and A-258
Push Pin A-183
For applications requiring precision pressing, such as shaft removal and insertion. This attachment fits 10 ton
cylinders and requires the use of a threaded adaptor saddle (A-13).
Smooth Saddle A-185
For pressing applications of delicate parts, such as aluminum castings, this saddle decreases surface
marks during the pressing application. Requires 10-ton cylinder and threaded adaptor saddle (A-13).
The Standard In Workshop Tools
* Requires RC cylinder listed, see page 7 for specifications.** Requires RC-25 ton cylinder, limited to 20 tons.*** Complete set includes cylinder and pump.
Arbor
C-Clamp
Bench
Press Type
Press Model Number
Maximum Vertical Daylight
(in)
Maximum Bed
Width
(in)
Cylinder Series
Number*
Weight
(lbs)
Press Capacity
(tons)
▼ A-310 Abor Press
8.9410.256.509.00
11.8815.3815.3815.38
A-310*A-330*A-205*A-210*A-220**A-258*IPA-1022***IPH-1040***
10305
1020101010
RC-10-xRC-30-xRC-5-x
RC-10-x**–
RC-1010RC-1010
62220143783
103140135
5.317.002.003.253.75
15.0015.00 15.00
157
K
K
C
D
O
G
B
L M N
F
J
E H
A
J
FB
D
C
G
A
K
L
M
E
H
▼
H
M
E
N
OA
FD
LJ
K
C
B
G
6
69
C-Clamp, Arbor and Bench Frame Presses
Bench Press Frame A-258
C-Clamp Press A-205, A-210, A-220
Arbor Press A-310, A-330
AIPSeries
Capacity:
5-30 tonMaximum Daylight and Width:
15.38 and 15.00 inchesMounting Capabilities:
Fixed or PortableMaximum Operating Pressure:
10,000 psi
A perfect example of the force and versatility of the Enerpac A-220 C-Clamp press.
Press Adaptor
A-110 V-Block(optional)
For high-cycle production applications, C-Clamp and Arbor presses should be limited in their capacity.
Consult Enerpac Technical Services for specific application details.
Press Model Number
Press Dimensions (in)
A B C D E F G H J K L M N O
Top View Working Surface
Hydraulic Cylinders
Cylinders for C-Clamps and Arbor Presses must be ordered separately.
Hydraulic Pumps
Pumps for C-Clamps and Arbor Presses must be ordered separately.
Page:
Page:
16.3121.9411.4416.0021.2525.63 25.63 25.63
11.0613.888.0011.1313.6318.75 18.7518.75
8.9410.256.509.0011.8816.50 16.5016.50
6.006.003.756.006.0016.00 16.0016.00
5.317.002.883.254.765.75 5.755.75
2.502.501.021.021.021.00 1.001.00
4.815.502.002.252.754.50 4.504.50
.751.002.502.502.751.25 1.251.25
3.816.501.061.691.882.75 2.752.75
6.888.004.757.638.381.88 1.881.88
2.562.631.001.131.135.30 5.305.30
2.133.88
–––
2.20 2.202.20
8.6310.88
–––
2.63 2.632.63
2¼-14 un
35•16-12 un
1½-16 un
2¼-14 un
35•16-12 un
3.253.253.25
A-310A-330A-205A-210A-220A-258IPA-1022IPH-1040
.34(8x)
11.44 (A-310)14.75 (A-330)
.50
1/2"-13UNC
1.63 (A-330)1.38 (A-310)
3.38 (A-330)4.00 (A-310) 2.32
13.92
158 www.enerpac.com
Press Accessories and Press Speed Chart
Cylinder Capacity
(tons)
Cylinder Load
Single Speed
P-391P-392 P-80
P-84P-462P-464
ZE3Series
ZE4Series
ZE5Series
XA PA-133 PAM 10Series
½ hpPort.
½ hpSubm.
Hand Operated Pumps Electric Pumps Air Pumps
Strokes per inch of plunger travel
Two-Speed @100 psi air
Seconds per inch of plunger travel
No loadLoad
No loadLoad
No loadLoad
No loadLoad
No loadLoad
Note: Values are approximate. Cylinder speed may vary in actual application.
Cylinder and Pump Selection Chart
Cylinder Mounting Block
V- Blocks
Hydra-Lift™
PumpMountingBracket
10 ton Bench10 ton H-Frame25 and 30 ton H-Frame50 ton H-Frame100 ton H-Frame200 ton H-Frame
10 ton Bench Press10 ton H-Frame25 and 30 ton H-Frame50 ton H-Frame100 ton H-Frame150 & 200 ton H-Frame200 ton Roll Frame
25-100 ton H-Frame150-200 ton H-Frame50 and 100 ton Roll Frame200 ton Roll Frame
Hand operated and small Air Pumps; P-80, P-84, P-142, P-392, PA-133, XA, Turbo II pumps
Electric, large Hand Pumps, and ZA4 Air Pumps; ZE Series, P-462, P-464, 10/90 Series Air Pumps
• AD-175 converts the Bench press to use an RD-9 ton cylinder
• All mounting blocks allow horizontal movement of cylinder
• Machined from high strength steel for long life
• A-110 includes one V-block • All other model numbers
include two V-blocks
• Allows easy, effortless daylight adjustments
• Includes accessory chain
• Both mounting brackets are pre-drilled to accept a number of different pump models
Description FrameCapacity
ModelNumber
Features
Cylinder SpeedThis chart will help you calculate the time required for an Enerpac cylinder to extend when powered by a 10,000 psi Enerpac hydraulic pump. The Cylinder Speed Chart can also be used to determine the pump type and model best suited for an application when you know the plunger speed required.
ZA4
10
25
30
50
100
1515343443437373137137
4158341043167330137
215534743117321137
18118123238371
.76.71.5
15.51.9
19.53.3
33.26.2
61.9
.96.72.1
15.52.6
19.54.4
33.28.3
61.9
.33.4.7
7.7.9
9.801.5016.62.8
31.0
.22.2.5
5.2.6
6.51.0
11.01.9
20.7
.21.1.4
2.6.5
3.3.8
5.51.5
10.3
1.109.002.60
20.603.20
26.005.50
44.2010.3082.50
2.7016.806.20
38.607.50
48.7013.3082.9224.80
154.70
.2114.90.48
34.30.60
43.301.00
73.701.90
137.50
AD-175IPK-1012IPK-3012PK-501PK-1002PK-2002
A-110A-136A-130A-150A-175A-200A-200R
IPL-100IPL-101IPLR-100IPLR-200
PMB-1
PMB-2
.164.50.36
10.30.46
13.00.80
22.101.50
41.30
159
x=
IP H - 050 S 06 - 1
Custom Built Presses
IP Series
Capacity:
10-200 tonsMaximum Daylight and Width:
54.50 & 48.00 inchesMaximum Operating Pressure:
10,000 psi
“No Load” indicates the plunger speed as it extends toward the load (1st stage). “Load” indicates the plunger
speed as the load is applied at a system pressure of 10,000 psi (2nd stage).
Formula V = A ÷ Q
V (sec/in) = A (in2) ÷ Q (in3/min)
V = Cylinder plunger speed in seconds per inch
A = Cylinder effective area in square inches (in2)
Q = Pump oil flow in cubic inches (in3)
Cylinder Plunger Speed (sec/in)
60 sec1
Cylinder Effective Area (in2)Pump Flow Rate (in3/min)
1Product
Type
2Frame Type
3Press
Capacity
4Cylinder
Type
5Cylinder Stroke
1 Product Type IP = Industrial Press
2 Frame Type H = H-Frame R = Roll Frame 1)
3 Press Capacity 010 = 10 ton 025 = 25 ton 030 = 30 ton 050 = 50 ton 100 = 100 ton 150 = 150 ton 200 = 200 ton
4 Cylinder Type S = Single-Acting (RC-Series) D = Double-Acting (RR-Series)
Model number: IPH-050S06-2
IPH-050S06-2 is a 50-ton H-Frame press with a single-acting, 6 inch stroke cylinder (RC-506). It has a pump mounting kit (for an electric Pump or a Modular Air Pump).
See the cylinder and pump selection chart on previous page for selecting the proper pump.
1) Roll Frame Press: 50-, 100- and 200-ton press capacity only. (Assembly required) 2) Includes hoses for press, except for option 0.
6Pump
Mounting Kit
CUSTOM BUILD YOUR OWN PRESSIf the press that would best fit your application cannot be found in the charts, you can easily build your custom press here. All presses must be ordered with cylinders. The pump is ordered separately.
▼ This is how a press model number is built up:
Ordering Example
5 Cylinder Stroke (in)- 10 ton S/A: 06, 08, 10, 12, 14 10 ton D/A: 10, 12- 25 ton S/A: 06, 10, 12, 14- 30 ton S/A: 08 30 ton D/A: 08, 14- 50 ton S/A: 06, 13 50 ton D/A: 06, 13, 20- 100 ton S/A: 06, 10 100 ton D/A: 06, 13, 18- 150 ton D/A: 06, 13, 32- 200 ton D/A: 13, 18, 24
6 Pump Mounting Kit 2)
0 = No mounting kit 1 = Hand operated and small air pumps: P-80, P-84, P-141, P-142, P-202, P-391, P-392, PA-133 and all Turbo II Air pumps 2 = Electric, large hand operated and modular air pumps: PUJ-12, PEM-12, ZE3-6 Series P-462, P-464 PAM-10 and -90 Series
▼
160 www.enerpac.com
DA
BC
G (2x) EF
G F
A
D
1/2"-13UNC
CB
E
5/8"-11UNC
Tension Meter and Load Cells Shown: LH-102 and TM-5 (in middle)
TM, LHSeriesCapacity:
2,000 to 200,000 lbs. Accuracy, % of full scale:
± 2%
Direct MountedDirect Load Cell Mounted
Remote Mounted with 2 ft. Hose
Remote Mounted with 6 ft. Hose
Model Number
Gauge Capacity
Tension Meter TM-5• Accuracy, ± 2% of full scale• Zinc and bronze plated to resist rust and corrosion• Dual-range readout in kilograms and pounds• Cushioned metal case provides safe storage
and transport• Maximum indicating pointer reading for pre-selected
forces or to maintain maximum force readings
Load Cells LH Series• Accuracy, ± 2% of full scale• Swivel loading pad reduces eccentric loading for
improved accuracy• Maximum indicating pointer reading for pre-selected
forces or to maintain maximum force readings• Dual-range readout in kilograms and pounds
LH-Series
TM-5
Type
(lbs) (kg) A B C D E F G
Minimum Reading
Gauge Increments
(lbs)(kg) (kg)(lbs)
Dimensions (in)
TM and LH models are 100% tested to verify accuracy within a ± 2% range.
If your application requires a calibrated tool, it must be submitted for certification testing.
Certification is NOT available from Enerpac.
10,0002,00010,0002,00010,00020,00050,000100,000200,000
4.753.063.063.063.063.064.005.226.22
9.751.751.751.751.751.752.754.005.00
9.292.252.252.252.252.253.385.006.25
2.002.382.382.382.382.382.382.382.38
4.004.004.005.815.815.815.815.815.81
.8810.0010.0033.3133.1033.1082.4484.0685.31
.75 ¼"-20, 1.75" bc
¼"-20, 1.75" bc
¼"-20, 1.75" bc
¼"-20, 1.75" bc
¼"-20, 1.75" bc
⅜"-24, 2.5" bc
⅜"-24, 3.5" bc
⅜"-24, 4.0" bc
TM-5LH-10LH-50LH-102LH-502LH-1002LH-2506LH-5006LH-10006
4500900450090045009000210004500090000
500100500100500
100025002500
10000
10020
10020
100200500
1,0002,500
10020
10020
100200500
10001000
1,000200
1,000200
1,0002,0005,0005,00020,000
.62
161
FPO
Custom Hydraulic Presses
CUSTOMIZABLE FEATURES:• Capacity
• Cylinder Stroke
• Pump Type
• Controls
• Guarding
• Daylight Dimensions
With decades of experience and in-house capabilities look to Enerpac to help find solutions to your customization needs.
Next to our large range of standard workshop presses, Enerpac offers the possibility of customization. Because many customers have specific requirements, we offer turn-key project management, including design, engineering and manufacturing. As the market leader, we listen to our customers and with our world
wide experience we offer the best solutions, especially when safety is not negotiable. Whether a longer stroke, wider frame or complete new design is required, our custom product group has many years of experience in multiple industries to deliver
a solution that meets or
exceeds expectations.
◂ Fully Automated PLC-Controlled 1800-Ton, High-Accuracy Press
◂ 50-Ton Workshop Press for Maintenance Jobs
◂ 100-Ton Press for Assembly of Spring-Loaded Cylinders
OVERVIEW
▴ Enerpac’s hydraulic presses can be configured to fulfill a broad range of applications. Each press is designed and manufactured according to customer specifications and in cooperation with our engineering team.
CONFIGURATIONS• Vertical and horizontal press
• Cylinders mounted in upper and lower bolsters
• Height built to customer specifications
• Daylight (vertical and horizontal) built to customer specifications