Energy, Fuel, Power & Water Energy, Fuel, Power & Water IndependenceIndependence

The mark of successThe mark of successin our quest forin our quest forenergy independence energy independence will be the moon shot will be the moon shot of our generation.of our generation.

J.G. Roger LerouxJ.G. Roger Leroux

ENERGY FROM WASTESENERGY FROM WASTES

A PROJECT UNDERTAKEN BY A PROJECT UNDERTAKEN BY

The foundation for our children’s childrenThe foundation for our children’s childrenGreen U.S.A.Green U.S.A.novaaqua botswana pty ltd.novaaqua botswana pty ltd.UNESCO - United Nations Education,UNESCO - United Nations Education, Scientific & Cultural Organisation Scientific & Cultural Organisation

Energy, Fuel, Power & Water Energy, Fuel, Power & Water IndependenceIndependence

through space-age advanced simplified equipment, machinery and know-how

all powered by a mighty mini engine permitting all powered by a mighty mini engine permitting immense savings and money making, low cost, immense savings and money making, low cost,

new globe leading productsnew globe leading products

A technology package destined to affect global economies through new local cities and towns infrastructure support

system, allowing for a self-sustained economic development programme for every country.

Introducing The M Engine

This document contains confidential and proprietary information belonging exclusively to the Foundation for our children’s children - and its technology suppliers

#5. Intake of the bottom half#6. Relief hole of the

engine compression

#7. Compressed air inlet for the power stroke of the bottom half

#8. Exhaust hole of the bottom half.

#1. Intake of the top half

#2. Relief valve of the compression on the top half

#3. Compressed one way air inlet for the power stroke of the top half

Additional Section to be added to double the hp or provide compression and pumping capability.

#4. Exhaust hole of the top half

Rpm meter

Air Motoring tests of the M Engine on Dynamometer

Comparisons of weight to hp & CID

Cummins Turbo Diesel Engine

Bore: 5.5”, Stroke: 6”, 6 Cyl.855 Cubic Inch Displacement

Approx 2,000 lbs. 475 hp @ 1,800 rpm

Mazda Rotary Engine4 Cyl. Equivalent80 Cubic Inch DisplacementApprox 200 lbs. 140 hp @ 4,500 rpm

The M ENGINEBore: 3”, Stroke: 3.75”32 Cyl. Equivalent850 Cubic Inch DisplacementApprox. 150 lbs.3,000 hp @ 2,000 rpm

A 5’dia x 7’ M Pump can perform the work of a 50’x10’x10’ Natural Gas

Compressor costing $50M80% reduction in fuel

(consumption)Comparative sizes Comparative sizes forforthe same powerthe same power

Applications and usesApplications and usesfor the M Enginefor the M EngineAviation: Aircrafts, helicopters, human propulsion, aero space, support equipment and so on.

Automotive: cars, trucks, tractors, buses, off-road, farm equipment, military vehicles, industrial vehicles, engines replacing electric motors, utility vehicles, etc.

Rail vehicles: light rail, metro, high speed trains, inter citytrains, commuters/regional trains, locomotives/ or self-powered railroad cars (rear wheel powered at the wheel)

Marine: large ship, ferries, ice-breakers. engines and electric power, other engines replacing motors, yachts, power boats, small in- and outboard power boats

Recreation: snowmobiles, off-road, all-terrain, bikes, golf& other carts and many more.

Uses1. Internal Combustion Engine

A. Compression Ignition – DieselB. Spark Ignition – GasolineC. Spark Ignition – Alternate fuel

Other applications and usesOther applications and usesfor the M Enginefor the M Engine

2. Flexible Fuel Engine Designs

3. Incinerators – uses 70 % garbage for fuel

4. Micro engines – Battery power pack charging system

The M Air Car-3rd Gen. The M Air Car-3rd Gen. (retrofitted on Ford Focus retrofitted on Ford Focus

for demonstration purpose)for demonstration purpose)

The M Air Car-3rd Gen. Demo

(retrofitted on a Ford Focus)

Next will be the new concept

The

Carries No Compressed Air TankBattery use is minimal

ZEV (zero emission vehicle) (clean air credit?) for every car

Free body design mini engine – mini battery- mini reservoir –

no transmission - no cooling

RESULTSsuper low cost “people’s car”

beats the original concept of the Volkswagen

What is special about theM Engine?

It’s an efficient engine, pump, an air motor (expander).

The M Engine threw away 80% of operating parts common in conventional engine design.

High torque makes it possible to eliminate the use of transmission and differential.

A 14” diameter by 14” long M Engine generates more than 3,000 horsepower from 850 CID.

4 3/4” x 7” M Engine (fuel) will power passenger cars with mileage in excess of 100 miles (160 km) per gallon.

This engine will spawn the new industrial revolution.

THE M ENGINETHE M ENGINE CONVERTS INTO A PUMP CONVERTS INTO A PUMP

MINI M ENGINE to convert it to a

PUMP

MINOR CHANGESARE REQUIRED IN THE

Application and uses for the M EngineApplication and uses for the M EnginePump ApparatusPump Apparatus

and Compressor and Compressor

Major Advantages:• Large displacement from a tiny package design• High volume, high flow and high pressure, all combined into one unit.

Uses1. Internal Combustion Engine2. Air Compressor Pumps3. Liquid Pumps4. Gas Pumps

All Land, Sea, and Air transportation Stationary and Mobile engine design Heavy Equipment (Hydraulic)

A. High volume due to large displacement: Perfect for a miniature air compressor B. Continuous air flow on demand… No need for an air tank C. Multiple stage replacements for ultra high compression D. Vacuum pumps: High vacuum at the complete range

E. Low noise blowers … example: sweepers, conveyors and so on

Applications and uses for the Applications and uses for the Air Compressor Pumps Air Compressor Pumps Uses5. Air compressor Pumps

Hydraulic pumps Hydroelectric power generation … to replace Turbine pumpsPumping stations for oil pipelines and Transfer pumpsAir-lift pumps… Oil recovery … From two miles+ deep brought up to surfaceIrrigation – Plantation & agricultural useForce pumps… Fire engine pumps,Desalination: High volume, high flow and high pressureEvacuation type pumps … example: Panama canal, Swimming pools, etc.

Applications and uses for the Applications and uses for the Liquid Pumps Liquid Pumps Uses6. Liquid Pumps

Underground natural gas excavation and transferLight Gas compression – pumps for Hydrogen, Nitrogen, Helium, Argon, on and on.

Applications and uses for the Applications and uses for the Gas Pumps Gas Pumps

Uses7. Gas Pumps

Our secret space-age supplierof leading, exclusive technologiesrepeated this idiom frequently

Great Spirits have always encountered violent opposition

from mediocre minds.-- Albert Einstein

It is important for the whole world to prevent or counter the European master plan to take control of global commodities at the expense of country's independence, loss of natural resources and of honour when they realize the inevitable.

The new concept of technology owners investing their un-commercialized technologies and know-how in exchange for futures in new companies undertaking to commercialise these profitably by selling to sister countries and exporting to all corners of the Globe.

This, coupled with new, leading, exclusive technologies, capable of being applied to a minimum of three markets will be part of the next economic development boom.

This Foundation for our children’s children, together with the Hydrology group of UNESCO have undertaken to implement a plan to help create new ventures from the bottom-up of markets such as through women led co-ops selling to their fellow citizens as well as top-down through countries and companies taking the opportunity to get into real accelerated self sustaining economic development. One counter move offered to mankind.

J.G. Roger Leroux - Chairman

The following arespecifications of the M Engine *

For your information please

Specs. of the M Engine *

* This Model is for Marine / Aircraft, Power Generation, etc.Resized models for trucks, off-road equip., will be developed.** 3.1416*(3)(3)*3.75*32/4 = 848.2

Equiv. To 32 Cylinder, 4-stroke-cycle DieselBore--mm(in) …………………………………… 76.2(3)Stroke--mm(in) …………………………… 95.25(3.75)Displacement-- Cu in(L) ………………. 848 (13.8)**Aspiration ………………………………….. NormallyCompression Ratio ………………………. 20:1Rotation (from Fly Wheel end) …………….. CCW/CWThe engine requires no lubrication except in exceedingly dusty or extreme conditions.

Cooling System …………………………… Oil CoolingLube Oil System--Quart …………………. dry sump, 5Weight, Net Dry(Approx.) Kg(lb) including flywheel …………. 90.8 (200)Advertised hp (KW) ………………… .. 850(634) NA

3,000 (2,238) SC/TC.

TheThe 14” 14” MM ENGINE ENGINE

Toroidal Type Toroidal Type 14” long x 14” diameter14” long x 14” diameter Weight: 150 lbsWeight: 150 lbs 3,000 hp 3,000 hp @@ 2,000 rpm 2,000 rpm A total of 20 parts, 12 are moving. No oil A total of 20 parts, 12 are moving. No oil

sump. No heat, and uses minimal amounts of sump. No heat, and uses minimal amounts of fuel.fuel.

An additional 32 cylinder section can be An additional 32 cylinder section can be added to the back of the engine to produce added to the back of the engine to produce 6,000 hp 6,000 hp @@ 2000 rpm. 2000 rpm.

TheThe 24” 24” M ENGINE M ENGINE Toroidal Type Toroidal Type 24” long x 24” diameter24” long x 24” diameterWeight: 200 lbsWeight: 200 lbs 7,000 hp 7,000 hp @@ 2,000 rpm 2,000 rpmAn additional 32 cylinder section can be added An additional 32 cylinder section can be added

to the back of the engine to produce 14,000 hp to the back of the engine to produce 14,000 hp @@ 2000 rpm. 2000 rpm.

Powers a 10 MW variable speed generator Powers a 10 MW variable speed generator producing continuous electric energy using 85% producing continuous electric energy using 85% less fuel than a comparable sized engine and less fuel than a comparable sized engine and generator.generator.

TheThe M ENGINE M ENGINE forforelectric generationelectric generation

The 14” & 24” engine will power a 2.5 MW, or The 14” & 24” engine will power a 2.5 MW, or 5 MW, or 10 MW variable speed generator 5 MW, or 10 MW variable speed generator systems to provide constant Power Quality (PQ) systems to provide constant Power Quality (PQ) at any rpm. at any rpm.

The systems are self contained and portable The systems are self contained and portable with low decibel levels to allow installation in, with low decibel levels to allow installation in, adjacent to, or on top of buildings.adjacent to, or on top of buildings.

TheThe M ENGINE M ENGINE forforelectric generationelectric generation

The systems provide Delivered Generation The systems provide Delivered Generation without the need of long distance transmission without the need of long distance transmission or local distribution system. or local distribution system.

To eliminate interruptions in service, the To eliminate interruptions in service, the systems are redundant with all engines systems are redundant with all engines operating and available on demand. The operating and available on demand. The M M

EngineEngine fueled withfueled with ALCOHOL/FUELALCOHOL/FUEL provides provides renewable energy. renewable energy.

TheThe M ENGINE M ENGINE for Pumpingfor Pumping

The unique design of the engine allowsThe unique design of the engine allows the rear section the rear section to be added to serve as a true displacement pump that to be added to serve as a true displacement pump that can provide flow, volume, and pressure simultaneously. can provide flow, volume, and pressure simultaneously.

The 24” model of the engine will pump 25,000 gallons of The 24” model of the engine will pump 25,000 gallons of water per minute, or 1,500,000 gallons per hour.water per minute, or 1,500,000 gallons per hour.

The engine will consume a minimal amount of The engine will consume a minimal amount of ALCOHOL/FUELALCOHOL/FUEL,, reducing the cost to pump an acre foot of reducing the cost to pump an acre foot of water by 60%.water by 60%.

A standard pump for an equal amount of water is A standard pump for an equal amount of water is approximately 8 feet high and 3 feet wide, and will approximately 8 feet high and 3 feet wide, and will require a minimum of a 3,000 hp electric motor. require a minimum of a 3,000 hp electric motor.

TheThe M ENGINE M ENGINE for Compressionfor Compression

Utilizing the rear section of the Engine as a compressor with Utilizing the rear section of the Engine as a compressor with simultaneous flow, volume, and pressure, will provide air simultaneous flow, volume, and pressure, will provide air volume equal to equipment 8 to 10 times the size of the volume equal to equipment 8 to 10 times the size of the M M ENGINE. ENGINE.

The 24” model will deliver 8,000 cu ft of air per minute, on The 24” model will deliver 8,000 cu ft of air per minute, on demand, with 2,000 rpm shaft speed. demand, with 2,000 rpm shaft speed.

No lubricating oil is required, and the engine produces No lubricating oil is required, and the engine produces minimal heat. minimal heat.

Fuel requirements are 70% less than a comparable sized Fuel requirements are 70% less than a comparable sized

compressor.compressor.

• The systems will eliminate the need of landfills in Cities,

States, Countries at no cost to the governmental entity. The systems will eliminate municipal solid waste, medical waste and tires without emissions. Every 600 tons per day of waste that is not deposited in a landfill will eliminate 90 tons of emissions per day for the next 30 years. The cost to eliminate waste (tipping fees) can be established for a term of 10 years or more.

• The elimination of every 600 tons per day of waste, sewage and tires, produces 450,000 bbl. per year of renewable carbon-based ALCOHOL/FUEL.ALCOHOL/FUEL.

THE SOLUTION ISTHE SOLUTION IS:

• ALCOHOL/FUELALCOHOL/FUEL will be a single fuel for gasoline engines significantly reducing emissions, and will be equally effective in the reduction of emissions when used as an additive in diesel fuel.

• ALCOHOL/FUELALCOHOL/FUEL is the alternative for heating fuel. It burns emission free, and eliminates all residual soot.

• The price of ALCOHOL/FUELALCOHOL/FUEL can be established for a decade or more.

THE SOLUTION ISTHE SOLUTION IS:

• The M ENGINE that will reduce the demand for fuel by 80% when powering Delivered Generation Systems, Pumps, Compressors, and desalination systems.

• The renewable Delivered Generation Systems will provide compact, self contained 2.5 MW, 5 MW, and 10 MW units, that can be operated independently, or in multiples of 50 or more to provide redundant, continuous, uninterrupted, Quality Power in any location.

THE SOLUTION IS:THE SOLUTION IS:

• The power, efficiency, and simplicity of the M ENGINE will reduce the use of electric energy for pumping and compression by 60%. It will eliminate heat and lubricating oil when operating as a pump or compressor.

• The compact M ENGINE, with its low weight to power ratio and fuel efficiency, is the new economical and environmentally acceptable power source to serve all industries.

THE SOLUTION IS:THE SOLUTION IS: