ENE040607000004 BSC6810V200R010 System Commissioning Issue1.0

8/3/2019 ENE040607000004 BSC6810V200R010 System Commissioning Issue1.0

1/33

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved

Internal

www.huawei.com

BSC6810 System

Commissioning

BSC6810V200R010


2/33

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 2

The commissioning of the

RNC is performed after the

hardware and software are

installed. The commissioning

ensures that the RNC works

properly as designed.


3/33


Upon completion of this course, you

will be able to:

Describe the procedure of BSC6810

system commissioning

Discuss loading commissioning, local

office commissioning, interface and

service commissioning


4/33


References

RNC System Description RNC Architecture and Principle RNC Commissioning Guide


5/33


Chapter 1 System Commissioning Overview

Chapter 2 System Commissioning

Chapter 3 Checking RNC Commissioning


6/33


RNC Commissioning Preparations

This task describes how to obtain the installation software

License

MML command scripts

System Commissioning Overview


7/33HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 7

Main contents of system commissioning

1. Commissioning RNC Equipment

2. Verifying Interface : Iub,Iur,Iu-cs,Iu-ps Interface

3. Handling Alarms During RNC Commissioning

4. Verifying RNC Services

5. Integrating the RNC into the M2000

6. Creating RNC Scheduled Tasks

7. Checking RNC Commissioning Results

System Commissioning Overview


8/33






9/33


2.1 Commissioning RNC Equipment

2.2 Verifying Interface : Iub,Iur,Iu-cs,Iu-ps Interface

2.3 Handling Alarms During RNC Commissioning

2.4 Verifying RNC Services

2.5 Integrating the RNC into the M2000

2.6 Creating RNC Scheduled Tasks

Maincontentsof system commissioning



10/33


Commissioning BAMs

Obtain the Installation Information of the BAM Software

Administrator password of Windows Server 2003 .

Password for the user sa to log in to SQL Server 2000 .

Fixed IP addresses of the internal and external networks .

Remotely Logging In to the BAM

Choose Start > Run . The Run dialog box is displayed.Enter mstsc /console and click OK. The Remote Desktop

Connection dialog box is displayed.

When entering the mstsc /console, leave a space between mstsc and

/console!

Enter the external virtual IP address of the BAM for remote login, and

then click Connect.

Enter the name and password of an administrator-level user of the

BAM, and then click OK. You are remotely logged in to the BAM.


11/33


Checklist for BAM Software Settings Performed Before Delivery

Installing Windows Server 2003The default password of the administrator of the active and standby BAMs is11111111.

Starting the Routing and Remote Access serviceThe Routing and Remote Access service is started and Startup Type is setto Automatic.

Starting the Terminal Services serviceThe Terminal Services service is started and Startup Type is set toAutomatic.

Creating the internal network team

The preset IP addresses of the internal Ethernet adapters are:

Active BAM: 80.168.3.50 (255.0.0.0)

Standby BAM: 80.168.3.60 (255.0.0.0)

Creating the external network team

The preset IP addresses of the external Ethernet adapters are:

Active BAM: 172.121.139.201 (255.255.255.0)

Standby BAM: 172.121.139.202 (255.255.255.0)

Configuring backup channel IP addresses of the active andstandby BAMs

The preset backup channel IP addresses are:

Active BAM: 192.168.3.50 (255.255.255.0)

Standby BAM: 192.168.3.60 (255.255.255.0)

Configuring commissioning IP addresses of the active andstandby BAMs

The preset commissioning IP addresses are:

Active BAM: 192.168.6.50 (255.255.255.0)

Standby BAM: 192.168.6.60 (255.255.255.0)

Installing SQL Server 2000 The default password of the sa account is 11111111.

Installing SQL Server 2000 Service Pack 4 The version number is 8.00.2039.

Commissioning BAMs


12/33


Checking BAM Software

Check the version of Windows Server 2003 on the BAM.

Check active services on the BAM.

Check the version of SQL Server on the BAM.

Check the operation of the SQL Server database.

Check the login mode of the SQL Server database on the BAM.

Check the data sequence of the SQL Server database on the BAM.

Check the name consistency between the BAM and SQL Server.

Check and ensure that no BAM has the same name as that of the current BAM

in the same subnet.

Check the teaming of the Ethernet adapters on the BAM.

Check the teaming modes of the Ethernet adapters on the BAM.

Check the system time and time zone of the BAM and ensure that it is

consistent with the local time.

Check and ensure that the system patron is not installed on BAMs.

Commissioning BAMs


13/33


Installing the BAM Application inthe Active Workspace

For details, refer to Software Installation Slide.

Checking the Operation of the BAM Application

Working Modes ofBAM

Description

Single-BAM modeWhen the BAM application is installed, State of each service is

Started, and Startup Type of each service is Automatic.

Dual-BAM mode

When the BAM application is installed successfully,

For the active BAM, State of each service is Started, andStartup Type of each service is Automatic.

For the standby BAM, the State parameter values of SNTPClient, FTP Server, DynMonitor, and FTP Client are Started

and the Startup Type parameter values of these services areAutomatic. The State parameter values of other services areStopped and the Startup Type of them are Disabled.

If the heartbeat test between the active and standby BAMssucceeds, the status bar displays DSS OK.

Commissioning BAMs


14/33


Checking the RNC LMT

Installing the RNC LMT Application

Connecting the RNC LMT to the BAM

Starting the Local Maintenance Terminal of the RNC

Commissioning the RNC LMT


15/33


Loading RNC Software and Data Files

Generating RNC Data Files

The generated subrack loading file is saved in BAM ActiveWorkspace Installation Directory\LoadData.

On the MML client, run the SET OFFLINE command , Run the RSTDATA command.

Running commands in batches.

Run the FMT DATA command to set Format type toALL_SUBRACK(Format all subracks) for formatting all subracks.

Run the SET ONLINE.

Setting RNC Loading Modes (Commissioning)

On the MML client, run the SET LODCTRL command to set Boardstart load control. to LFB (Load from BAM and write flash) .

Starting the RNC Message Tracing (Commissioning).

Starting the Loading Progress Window.


16/33


Loading the RSS Subrack

Switch on the power distribution boxes SW3 and SW6 to power onthe RSS subrack. The boards in the RSS subrack automatically load

the host software and data file from the BAM.

On the MML client, run the RST SUBRACK command to set

Subrack No. to 0. A dialog is displayed, asking you whether to

proceed. Click Yes. The boards in the RSS subrack automatically

load the host software and data file from the BAM.

Observe the loading progress of the associated RSS subrack in

Progress Management.

After the loading of the RSS subrack, click the Device Panel tab in

the navigation tree and then double-click the shelf node to be

queried.

The RSS subrack loading lasts 3 to 5 minutes.



17/33


Loading the RBS Subrack

Switch on the power distribution box to power on the RBS subrack.

On the MML client, run the RST SUBRACK command to set

Subrack No. to Number of the RBS to be loaded.

Observe the loading progress of the associated RBS subrack in the

Progress Management window.

After the current RBS subrack is loaded, go to Step 2 to load other

RBS subracks until all the RBS subracks of the RNC are loaded.

After all the RBS subracks are loaded, click the Device Panel tab in

the navigation tree and then double-click the shelf node to bequeried.

Observe the signaling connection setup on the Iub interface and cell

setup in the message tracing window.



18/33


Verifying the License

The license of the local office is in BAM Active Workspace

Installation Directory\FTP\Licenseand the file name is license.lic.

Run the LST CFGMODE to query the data configuration of all the

subracks. If the subrack is in offline mode, run the SET ONLINE

command to set the subrack to the online mode.

Run the ACT LICENSE command and set File Name to the name

of the specified license to activate the license.

Run the DSP LICENSE command and set Query type to SCU

(SPU, BAM). The system displays the current configuration of each

licensed service.

Verifying the License


19/33


The RNC supports switchover of boards such as the OMUaSCUa

SPUaGCUaAOUaUOIaFG2aGOUaPEUaAEUa

POUa

After the switchover of boards, the existing standby board becomes

the active one. The process lasts 2 to 5 seconds. The existing activeboard becomes the standby one and is reset. The process lasts 2 to

5 minutes

Verifying Switchover Between Active and Standby Boards


20/33











21/33


Verifying the Iub Interface

Checking physical link.

Checking control plane.

Checking user plane.

Checking management

plane.

Checking cell status.

ApplicationProtocol

DataStream(s)

ALCAP(s)

TransportNetwork

Layer

SignallingBearer(s)

Transport NetworkUser Plane

Control Plane User Plane


Transport NetworkControl Plane

RadioNetwork

Layer

SignallingBearer(s)

DataBearer(s)

Physical Layer

Interface and Service Commissioning


22/33


Verifying the Iu-CS

Iu-PS,Iur Interface

Checking physical links.

Checking control plane.

Checking user plane.

ApplicationProtocol

DataStream(s)

ALCAP(s)

TransportNetwork

Layer

SignallingBearer(s)


Control Plane User Plane


Transport NetworkControl Plane

RadioNetwork

Layer

SignallingBearer(s)

DataBearer(s)

Physical Layer

Interface and Service Commissioning


23/33











24/33


On the main menu of Local Maintenance Terminal, choose

Fault Management > Browse Alarm

Check whether there are alarms in the alarm browse window

Handle the alarm according to the suggestions in the Alarm

Handling part

If the alarm cannot be cleared, contact Huawei for technical

support

Handling Alarms During RNC Commissioning


25/33











26/33


Start the following RNC message tracing tasks: message tracing

over the Uu, Iu, Iub, Iur (Optional. Mandatory in inter-RNC handover),and CDT and REDIRECT serial-port print

Verify the voice service

Verify the CS streaming service

Verify the PS service

Verify mobility management

Verify OM management

Verify HSDPA

Verify HSUPA

Verify Other Services

Verifying RNC Services


27/33











28/33


Integrating the RNC into the M2000

BSC6810 physical connecting

with the operation and

maintenance network

Set the route from BSC6810 to

M2000

Add BSC6810 in M2000

Collecting the information of

location and IP address of

BSC6810 Add a new network and

BSC6810 in M2000


29/33











30/33


Automatically back up the RNC configuration data, performance

data, and alarm data

Automatically back up RNC logs

Creating RNC Scheduled Tasks


31/33






32/33


Check RNC commissioning results according to Checklists

for RNC Commissioning

Please refer to the manual about the detailed forms

Action ExecutionData Record (End Time, Personnel,

Data)/Reason for No Execution

The RSS subrack isloaded.

All the RBS subracksare loaded.

Checking RNC Commissioning Results


33/33

Thank You

www.huawei.com

ENE040607000004 BSC6810V200R010 System Commissioning Issue1.0

Documents

Transcript of ENE040607000004 BSC6810V200R010 System Commissioning Issue1.0