Endon LIghting Ltd supplement 2013

52
2013 SUPPLEMENT

description

Endon Lighting Ltd - Catalogue Supplement

Transcript of Endon LIghting Ltd supplement 2013

Page 1: Endon LIghting Ltd supplement 2013

2013 SUPPLEMENT

Page 2: Endon LIghting Ltd supplement 2013
Page 3: Endon LIghting Ltd supplement 2013

1

Families of pendants, fittings, wall brackets,

floor and table lamps as well as new product for

kitchen and outdoor.

WELCOME

CONTENT

Page 4: Endon LIghting Ltd supplement 2013

QUALITY POLICY STATEMENTEndon Lighting Ltd is committed to ensuring that its customers needs are fully understood and are courteously and appropriately satisfied by the provision of products fit for their intended purpose. We recognise that our customers are our business and that continuing success and customer satisfaction will be greatly assisted by the application of a programme of continuing self improvement with the ultimate aim of getting it ‘right first time, every time’.

OUTDOOR LIGHTINGCast aluminium, stainless steel and nylon fibre products have a 3 year guarantee against corrosion. These guarantees are null and void if products are installed where there is salt, fertilisers and chemical pollution in the air.

DIMENSIONSAll measurements are in millimetres, are approximate and include chain (unless stated), ceiling cup and glass. All table / floor lamps include the shade dimensions, except where indicated.

DIMMER SWITCHESA dimmer switch is a third part accessory and compatability is not guaranteed with Endon products. These notes are for guidance only. For further advice, please contact a qualified electrician or the manufacturer of the Dimmer Switch you intend to use.

Do not use dimmer switches for tubular fluorescent lamps, energy efficient replacement compact fluorescent or LED lamps. The dimmer switch will eventually burn out if used for these applications!

Products incorporating Integral Low Voltage Electronic / Toroidal Transformers.We do not generally recommend dimming these products, but if dimming is necessary, then a specialised dimmer switch may be required. Please consult a qualified electrician or dimmer manufacturer.

Products Using Main Voltage Halogen Bulbs (GU10, G9, ECO halogens and Linear Halogen Lamps).When using halogen lamps make sure that the dimmer is rated with at least twice the total wattage of the lamps to be dimmed, eg if using 3 x 50w GU10 halogen (150w), then make sure the dimmer is rated at 300w. See table below.

Follow the guide for maximum loads:-

Maximum Load onDimmer Switch Label

300w500w1000w

Dimmer switches must not be overloaded.Some dimmer switches are designed to run warm and it is quite usual for the front plate to reach temperatures of approximately 50 degrees Celsius during normal operation.

It is also quite normal to hear a slight buzzing coming from the dimmer switch in operation.

ENERGY SAVING EQUIVALENT INFORMATIONWhere reference is made to ‘energy saving equivalent’, this merely indicates that energy saving lamps such as CFL or LED exist, which provide a similar light output as the listed incandescent lamp.

However due to the ever changing design of such lamps, it is not possible to guarantee that a particular energy saving version of such a lamp will physically fit into the particular light fitting. It is recommended that the customer seeks advice from their retailer regarding this.

COPYRIGHT All text, illustrations and photographs are the property of Endon Lighting Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted by any means, electronic, mechanical, photocopying or otherwise, without the express written consent of Endon Lighting Ltd. Endon is a participant ofThe Lighting Industry Association Code of Practice.

SOLID AND LIQUID INGRESS PROTECTION RATINGS -

Ingress protection against liquids

IPX0 No protectionIPX1 Drip proofIPX2 Drip proof at an angle of 15°IPX3 Rain proof

IPX4 Splash proof IPX5 Water jet proofIPX6 Powerful water jet proof IPX7 Watertight (immersible)

Ingress protection against solids

IP2X protection against solid objects greater than 12mm

(ie fingers can not touch live parts).

IP3X protection against solids greater than 2.5mm

IP4X protection against solids greater than 1mm

IP5X Dust proof

IP6X Dust tight

2

This light fitting is not suitable for fitting to normally flammable surfaces.

This light fitting must be earthed.

This light fitting is double insulated and does not require an earth.

This light fitting is supplied from an isolating transformer at less than 50v.

This light fitting is fitted with a high frequency ballast.

This output from this equipment is safety isolated from the mains supply.

This light fitting is suitable for mounting inside furniture.

KEY TO SYMBOLS

150w250w500w

Maximum Load formains halogen

Page 5: Endon LIghting Ltd supplement 2013

Pendants, flush and semi-flush fittings, wall brackets, kitchen & display, spot lights,

table lamps, shades and outdoor.

2013 LIGHTING SUPPLEMENT

3

Page 6: Endon LIghting Ltd supplement 2013

BARDEM MIRROR MOSAIC INNER

4

BARDEM-WH

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

BARDEM-BL, RE & WH 1240 420 500 n/a 1 x 60w ES 3 1

BARDEM-BL

BARDEM-RE

Page 7: Endon LIghting Ltd supplement 2013

5

Page 8: Endon LIghting Ltd supplement 2013

MUNI LED

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

MUNI-CH 1780 713 480 n/a 126 x 0.08w LED n/a n/a 2

MUNI-CH

6

Page 9: Endon LIghting Ltd supplement 2013

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

CHAPLIN-6 1620 800 540 n/a 6 x 40w SES 3 1

CHAPLIN-6

7

CHAPLIN METAL

Page 10: Endon LIghting Ltd supplement 2013

8

FONDA GLASS

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

FONDA-9WH 1230 610 420 n/a 9 x 20w G4 Included n/a 1

FONDA-9WH

Page 11: Endon LIghting Ltd supplement 2013

CALHERNCALHERN-3CH

CALHERN-2WBCH

CALHERN-5CH

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

CALHERN-2WBCH 160 n/a 255 140 2 x 33w G9 Included 3 1

CALHERN-3CH 380 n/a 390 n/a 3 x 33w G9 Included 3 1

CALHERN-5CH 380 n/a 510 n/a 5 x 33w G9 Included 3 1

9

Page 12: Endon LIghting Ltd supplement 2013

CAGNEY

CAGNEY-1WBAB

10

CAGNEY-3AB

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

CAGNEY-1WBAB & 1WBSC 185 n/a 202 250 1 x 33w G9 Included 4 1

CAGNEY-3AB & 3SC 425 n/a 547 n/a 3 x 33w G9 Included 4 1

CAGNEY-5AB & 5SC 460 n/a 640 n/a 5 x 33w G9 Included 4 1

CAGNEY-5AB

Page 13: Endon LIghting Ltd supplement 2013

11

CAGNEY-1WBSC

CAGNEY-3SC

CAGNEY-5SC

Page 14: Endon LIghting Ltd supplement 2013

12

ARKIN-5CHARKIN-2WBCH

ARKIN-3CH

ARKIN

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

ARKIN-2WBAB & 2WBCH 247 n/a 275 160 2 x 33w G9 Included 3 1

ARKIN-3AB & 3CH 410 n/a 400 n/a 3 x 33w G9 Included 3 1

ARKIN-5AB & 5CH 410 n/a 560 n/a 5 x 33w G9 Included 3 1

ARKIN-2TLAB & 2TLCH 398 n/a 160 X 325 n/a 2 x 33w G9 Included 3 2

ARKIN-2TLCH

Page 15: Endon LIghting Ltd supplement 2013

13

ARKIN-5AB

ARKIN-3AB

ARKIN-2WBAB

ARKIN-2TLAB

Page 16: Endon LIghting Ltd supplement 2013

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

HARRISON-3AB & 3CH 555 n/a 580 n/a 3 x 33w G9 Included 3 1

HARRISON-5AB & 5CH 555 n/a 690 n/a 5 x 33w G9 Included 3 1

HARRISON

14

HARRISON-3CH

HARRISON-5AB

HARRISON-3AB

HARRISON-5CH

Page 17: Endon LIghting Ltd supplement 2013

ARLISSARLISS-3CH

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

ARLISS-3CH 565 n/a 520 n/a 3 x 33w G9 Included 3 1

ARLISS-4CH 1280 380 1025 x 330 n/a 4 x 33w G9 Included 3 1

ARLISS-5CH 570 n/a 760 n/a 5 x 33w G9 Included 3 1

ARLISS-5CH

ARLISS-4CH

15

Page 18: Endon LIghting Ltd supplement 2013

1616

BAXTER-3CH

BAXTER-5CH

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

BAXTER-3CH 327 n/a 380 n/a 3 x 33w G9 Included 3 1

BAXTER-5CH 327 n/a 400 n/a 5 x 33w G9 Included 3 1

CARNEY-6CH 170 n/a 700 x 375 n/a 6 x 33w G9 Included 3 1

BAXTER & CARNEY

CARNEY-6CH

CARNEY shade detail

Page 19: Endon LIghting Ltd supplement 2013

17

ALZIRA METAL

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

ALZIRA-BC, GR, RE & WH 1205 480 250 n/a 1 x 60w ES 3 1

ALZIRA-BC ALZIRA-GR ALZIRA-RE

ALZIRA-WH

17

Page 20: Endon LIghting Ltd supplement 2013

LANCASTER GLASS

LANCASTER-TLTE LANCASTER-1TE

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

LANCASTER-1TE & 1SMK 1000 490 130 n/a 1 x 15w CFL ES n/a 1

LANCASTER-TLTE & TLSMK 615 n/a 320 n/a 1 x 60w ES 3 2

18

Page 21: Endon LIghting Ltd supplement 2013

1919

LANCASTER-1SMK LANCASTER-TLSMK

Page 22: Endon LIghting Ltd supplement 2013

NICHOLSON-1NI

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

NICHOLSON-1NI 1600 641 240 n/a 1 x 60w ES 3 1

NICHOLSON-1WBNI 300 n/a 182 115 1 x 60w ES 3 1

NICHOLSON-2FNI 133 n/a 302 n/a 2 x 60w ES 3 1

NICHOLSON-1WBNI

NICHOLSON-2FNI

NICHOLSON

20

Page 23: Endon LIghting Ltd supplement 2013

COLMAN GOLD LEAF INNER

COLMAN-BLCOLMAN-CR

21

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

COLMAN-BL & CR 850 290 343 n/a 1 x 60w ES 3 1

Page 24: Endon LIghting Ltd supplement 2013

22

MARCONI-3CH(chrome effect mirror finish)

MARCONI-3LI(glass)

MARCONI-3DA(glass)

MARCONI-3NA(natural stone)

PRODUCT OVERALL DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

MARCONI-2WBCH, 2WBDA, 385 200 80 2 x 40w SES 3 12WBLI & 2WBNA

MARCONI-3CH, 3DA, 290 395 n/a 3 x 60w ES 3 13LI & 3NA

MARCONI MOSAIC

Page 25: Endon LIghting Ltd supplement 2013

MARCONI-2WBDA(glass)

MARCONI-2WBLI(glass)

MARCONI-2WBCH(chrome effect mirror finish)

MARCONI-2WBNA(natural stone)

23

Page 26: Endon LIghting Ltd supplement 2013

24

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

GABLE-3RE & 3SMK 1200 510 210 n/a 3 x 20w G4 Included n/a 2

GABLE-5RE & 5SMK 1200 510 295 n/a 5 x 20w G4 Included n/a 2

GABLE GLASS

GABLE-3SMK GABLE-3RE

GABLE-5RE

Page 27: Endon LIghting Ltd supplement 2013

25

GABLE-5SMK

Page 28: Endon LIghting Ltd supplement 2013

26

FINNEY, HARVEY & HUSTON GLASS

FINNEY-1AU HUSTON-1P

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

FINNEY-1AU 1325 422 198 n/a 1 x 40w ES 3 1

HUSTON-1P 1350 360 125 n/a 1 x 40w ES 3 1

HARVEY-1P 1325 422 198 n/a 1 x 40w ES 3 1

HARVEY-1P

Page 29: Endon LIghting Ltd supplement 2013

MONROE GLASS

MONROE-1CH

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

MONROE-1CH 1250 350 330 n/a 1 x 60w ES 3 1

27

Page 30: Endon LIghting Ltd supplement 2013

FRANCO

28

FRANCO-2WBBL

FRANCO-2WBGR

FRANCO-2WBRE

FRANCO-2WBWH

FRANCO-60BL FRANCO-60WH

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

FRANCO-2WBGR, 2WBRE, 178 n/a 300 160 2 x 40w SES 3 1 2WBBL & 2WBWH

FRANCO-40GR, 40RE, 185 n/a 400 n/a 2 x 60w ES 3 1 40BL & 40WH

FRANCO-60GR, 60RE, 185 n/a 600 n/a 3 x 60w ES 3 1 60BL & 60WH

Page 31: Endon LIghting Ltd supplement 2013

29

FRANCO-40BL

FRANCO-40WH

FRANCO-40GR

FRANCO-40RE

FRANCO-60GR FRANCO-60RE

Page 32: Endon LIghting Ltd supplement 2013

WELLESWELLES-3AB

WELLES-1WBAB

WELLES-1WBSC

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

WELLES-1WBAB & 1WBSC 130 n/a 298 150 1 x 60w ES 3 2

WELLES-3AB & 3SC 350 n/a 410 n/a 3 x 60w ES 3 1

30

WELLES-3SC

Page 33: Endon LIghting Ltd supplement 2013

HYATT-2WBCH

HYATT-1WBCH

HYATT

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

HYATT-1WBCH 175 n/a 145 116 1 x 60w SES 3 1

HYATT-2WBCH 114 n/a 360 118 2 x 60w SES 3 1

31

Page 34: Endon LIghting Ltd supplement 2013

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

HUDSON-2WBCH 150 n/a 252 103 2 x 60w SES 3 1

HUDSON-3CH 340 n/a 405 n/a 3 x 60w ES 3 1

HUDSON-2WBCH

HUDSON-3CH

32

HUDSON CRYSTAL

Page 35: Endon LIghting Ltd supplement 2013

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

DUVAL-1WBAG 470 n/a 130 105 1 x 60w SES 3 1

DUVAL-5AG 1165 715 600 n/a 5 x 40w SES 3 1

DUVAL-5AG DUVAL-1WBAG

DUVAL

33

Page 36: Endon LIghting Ltd supplement 2013

34

VILANA & KILBURN

KILBURN-FLAB

KILBURN-FLCH

KILBURN-TLCH

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

VILANA-TLGO 780 n/a 260 x 452 n/a 1 x 60w ES 3 2

KILBURN-TLAB & TLCH 605 415 515 n/a 1 x 40w ES 3 2

KILBURN-FLAB & FLCH 1670 1480 570 n/a 1 x 40w ES 3 2

KILBURN-TLAB

VILANA-TLGO(Antique gold leaf)

Page 37: Endon LIghting Ltd supplement 2013

35

TURNER

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

TURNER-FL-OAK, FL-CHE, 1335 n/a 280 n/a 1 x 60w BC 3 1 FL-MAH & FL-NAT

TURNER-FL-CHE(cherry)

TURNER-FL-MAH(mahogany)

TURNER-FL-NAT(natural)

TURNER-FL-OAK(oak)

(Base only-order Carla-18 shades separately)

Page 38: Endon LIghting Ltd supplement 2013

36

PRODUCT OVERALL DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

CALDANA-1WB 135 135 135 1 x33w G9 Included 3 2

COVA-1WB 280 280 120 1 x 60w ES 3 2

GATLIN-1WBCH 130 250 80 1 x 60w ES 3 2

MAYOLA-1WB 280 280 120 1 x 60w ES 3 2

MONTI-1WB 260 260 110 1 x 60w ES 3 2

STROBINO-1WB 275 265 110 1 x 60w ES 3 2

VERNER-1WBRE 265 255 110 1 x 60w ES 3 2

CALDANA-1WB(plaster)

WALL BRACKETS PLASTER & GLASS

Page 39: Endon LIghting Ltd supplement 2013

37

COVA-1WB (plaster)

MONTI-1WB (plaster & glass)

VERNER-1WBRE (glass)

GATLIN-1WBCH (glass)

MAYOLA-1WB (plaster)STROBINO-1WB (plaster)

Page 40: Endon LIghting Ltd supplement 2013

NON ELECTRIC METAL

NE-ALBANY-WH(pearl effect)

NE-APSLEY-WH(pearl effect)

NE-RYDALL-CH

PRODUCT OVERALL DIAMETER/ MAX WATTAGE LAMP ENERGY GIMBAL SHADE SHADE CODES HEIGHT (mm) WIDTH (mm) & LAMP HOLDER SHAPE SAVING EQUIV SIZE REDUCER CARRIER

NE-ALBANY-WH 168 255 x 255 1 x 60w BC/ES 3 29/42 3 n/a

NE-APSLEY-WH 180 170 x 170 1 x 60w BC/ES 3 29/42 3 n/a

NE-BRAMHAM-BZ 225 280 1 x 60w BC/ES 3 29/42 3 n/a

NE-RYDALL-CH 250 220 1 x 60w BC/ES 3 29/42 3 n/a

NE-BRAMHAM-BZ

38

Page 41: Endon LIghting Ltd supplement 2013

39

FLUSH ENERGY SAVING

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

EL-1725-BC, BP, CH & WH 85 n/a 310 n/a 1 x 38w GR10q Included n/a 1

EL-1725-BC-28W, BP-28W, 85 n/a 310 n/a 1 x 28w GR10q Included n/a 1CH-28W & WH-28W

EL-1725-BC

EL-1725-WH

EL-1725-BP

EL-1725-CH EL-1725-CH-28W(NEW)

EL-1725-BP-28W(NEW)

EL-1725-WH-28W(NEW)

EL-1725-BC-28W(NEW)

Page 42: Endon LIghting Ltd supplement 2013

40

SPOTLIGHTS

PRODUCT OVERALL MINIMUM DIAMETER/ LENGTH MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) WIDTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

EL-10041 & EL-10042 130 120 90-105 max n/a 1 x 50w GU10 Included 3 1

EL-10043 & EL-10044 135 125 150-235 max n/a 3 x 50w GU10 Included 3 1

EL-10045 & EL-10046 157 155 90-124 max 602-627 max 4 x 50w GU10 Included 3 1

EL-10106 130 125 90-105 max n/a 1 x50w GU10 Included 3 1

EL-10107 135 125 150-235 max n/a 3 x50w GU10 Included 3 1

EL-10108 157 155 90-124 max 602-627 max 4 x50w GU10 Included 3 1

EL-10043

EL-10044

EL-10046

EL-10045

EL-10042 EL-10041

EL-10107

EL-10108

EL-10106

Page 43: Endon LIghting Ltd supplement 2013

4141

PRODUCT OVERALL MINIMUM DIAMETER/ PROJECTION MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) LENGTH (mm) (mm) & LAMP HOLDER SHAPE SAVING EQUIV

EL-10081 120 n/a 675 n/a 2 x 24w T5 Inc n/a 2

EL-10082 90 n/a 620 n/a 2 x 24w T5 Inc n/a 2

EL-10085 125 n/a 85 x 1280 n/a 2 x 28w T5 Inc n/a 1

EL-10086 100 n/a 80 x 1270 n/a 2 x 28w T5 Inc n/a 1

FLUORESCENTEL-10085

EL-10086

EL-10081

EL-10082

Page 44: Endon LIghting Ltd supplement 2013

LED DISPLAY

PRODUCT OVERALL MINIMUM WIDTH/ PROJECTION MAX WATTAGE ENERGY CLASS CODES HEIGHT (mm) HEIGHT (mm) LENGTH (mm) (mm) & LAMP HOLDER SAVING EQUIV

EL-10037 35 n/a 255 33 47 x 0.052 cool white LED n/a 2

EL-10037-WW 35 n/a 255 33 47 x 0.052 warm white LED n/a 2

EL-10037-CON n/a n/a 16 x 438 n/a n/a n/a n/a

EL-10038 35 n/a 555 33 121 x 0.045 cool white LED n/a 2

EL-10038-WW 35 n/a 555 33 121 x 0.045 warm white LED n/a 2

EL-10079 30 n/a 332 33 65 x 0.05 cool white LED n/a 2

EL-10079-WW 30 n/a 332 33 65 x 0.05 warm white LED n/a 2

EL-10037 EL-10038

EL-10079

EL-10037-WW

EL-10038-WW

EL-10079-WW

42

EL-10037-CON(fits EL-10037, 38

& 79 ranges)

Page 45: Endon LIghting Ltd supplement 2013

43

PRODUCT OVERALL DIAMETER/ PROJECTION IP MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) WIDTH (mm) (mm) Rating & LAMP HOLDER SHAPE SAVING EQUIV

EL-40060 & EL-40061 100 315 90 IP44 1 x 11w ES CFL n/a 2

EL-40062 211 70 105 IP44 2 x35w GU10 Included 3 1

EL-40063 149 70 108 IP44 1 x35w GU10 Included 3 1

OUTDOOR EL-40060

EL-40061

EL-40062(PIR)

EL-40063(PIR)

IP44

IP44

IP44

IP44

Page 46: Endon LIghting Ltd supplement 2013

44

OUTDOOR

PRODUCT OVERALL DIAMETER/ PROJECTION IP MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) WIDTH (mm) (mm) Rating & LAMP HOLDER SHAPE SAVING EQUIV

EL-40064 320 240 350 IP44 1 x 40w ES 3 1

EL-40065 320 240 350 IP44 1 x 40w ES 3 1

EL-40066 320 240 350 IP44 1 x 40w ES 3 1

EL-40064

EL-40065

EL-40066

IP44

IP44

IP44

All have polycarb diffusers & a glass cover

Page 47: Endon LIghting Ltd supplement 2013

45

EL-10W-LED-FLOOD

EL-10W-LED-PIR-FLOOD

EL-20W-LED-FLOOD

EL-20W-LED-PIR-FLOOD

PRODUCT OVERALL DIAMETER/ PROJECTION IP MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) WIDTH (mm) (mm) Rating & LAMP HOLDER SHAPE SAVING EQUIV

EL-10W-LED-FLOOD 87-147 max 115 112-149 max IP65 10 x LED n/a n/a 1

EL-10W-LED-PIR-FLOOD 180-237 max 115 150-162 max IP44 10 x LED n/a n/a 1

EL-20W-LED-FLOOD 140-162 max 180 140-167 max IP65 20 x LED n/a n/a 1

EL-20W-LED-PIR-FLOOD 193-256 max 180 210-230 max IP44 20 x LED n/a n/a 1

OUTDOOR HIGH POWER LED

IP65

IP44

IP44

IP65

Page 48: Endon LIghting Ltd supplement 2013

PRODUCT OVERALL DIAMETER/ PROJECTION IP MAX WATTAGE LAMP ENERGY CLASS CODES HEIGHT (mm) WIDTH (mm) (mm) Rating & LAMP HOLDER SHAPE SAVING EQUIV

EL-ESTERNO-01 100 55 x 55 n/a IP20 18w n/a n/a 2

EL-ESTERNO-02 70 60 n/a IP68 1 x 1.5w LED n/a n/a 3

EL-ESTERNO-03 98 60 n/a IP67 1 x 1.5w LED n/a n/a 3

EL-ESTERNO-04 178 60 n/a IP68 1 x 1.5w LED n/a n/a 3

EL-ESTERNO-05 112 70 82 IP66 1 x 1.5w LED n/a n/a 3

EL-ESTERNO-06 62 54 2.5 IP68 1 x 1.5w LED n/a n/a 3

EL-ESTERNO-07 72 60 63 IP66 1 x 1.5w LED n/a n/a 3

EL-ESTERNO-08 86 60 63 IP66 2 x 1.5w LED n/a n/a 3

EL-ESTERNO-09 85 51 x 60 n/a IP44 22w n/a n/a 2

New

ESTERNO LOW VOLTAGE LED

46

EL-ESTERNO-02 EL-ESTERNO-03

EL-ESTERNO-04 EL-ESTERNO-05 EL-ESTERNO-06

EL-ESTERNO-01

EL-ESTERNO-07 EL-ESTERNO-08 EL-ESTERNO-09

IP20 IP68

IP68 IP66

IP67

IP68

IP66 IP66 IP44

Page 49: Endon LIghting Ltd supplement 2013

47

Lawn spike is supplied with EL-ESTERNO-02, 03 & 04.

D (mm) 60H (mm) 215

Easy installation

Indoor plug-in transformer orIP44 outdoor transformer.

IP rated light fittings.

Three year guarantee

Indoor IP20 plug in

transformer

STEP ONEPlan your garden layout to illuminate the features.

STEP TWOSelect any combination of light fittings in the Esterno range, providing that the maxmum wattage of the transformer (18w) is not exceeded.

Wattage of Fittings:Esterno-02 to Esterno-07 = 1.5w eachEsterno-08 = 3wTotal wattage should not exceed 18w.

STEP THREESelect your preferred transformer.

STEP FOURInstall the system.

IP44 Transformer

STEP ONEPlan your garden layout to illuminate the features and select your preferred transformer.

STEP TWOSelect any combination of light fittings in the ESTERNO range, providing that the maximum wattage of the transformer is not exceeded.

Wattage of fittings:EL-ESTERNO-02 to EL-ESTERNO-07 =1.5w each.EL-ESTERNO-08= 3wTotal wattage should not exceed the wattage of your selected transformer.

STEP THREEInstall the system.

Please note the drawing is for illustration purposes and only one transformer can operate each circuit of lights.

Page 50: Endon LIghting Ltd supplement 2013

48

INDEXALZIRA 17

ARKIN 12, 13

ARLISS 15

BARDEM 4, 5

BAXTER 16

CAGNEY 10, 11

CALDANA-1WB 36

CALHERN 9

CARNEY-6CH 16

CHAPLIN-6 7

COLMAN 21

COVA-1WB 37

DUVAL 33

EL-10W-LED-FLOOD 45

EL-10W-LED-PIR-FLOOD 45

EL-20W-LED-FLOOD 45

EL-20W-LED-PIR-FLOOD 45

EL-1725 39

EL-10041 40

EL-10042 40

EL-10043 40

EL-10044 40

EL-10045 40

EL-10046 40

EL-10081 41

EL-10082 41

EL-10085 41

EL-10086 41

EL-10037 42

EL-10038 42

EL-10079 42

EL-10106 40

EL-10107 40

EL-10108 40

EL-40060 43

EL-40061 43

EL-40062 43

EL-40063 43

EL-40064 44

EL-40065 44

EL-40066 44

EL-ESTERNO-01 46

EL-ESTERNO-02 46

EL-ESTERNO-03 46

EL-ESTERNO-04 46

EL-ESTERNO-05 46

EL-ESTERNO-06 46

EL-ESTERNO-07 46

EL-ESTERNO-08 46

EL-ESTERNO-09 46

FINNEY-1AU 26

FONDA-9WH 8

FRANCO 28, 29

GABLE 24, 25

GATLIN-1WBCH 37

HARRISON 14

HARVEY-1P 26

HUDSON 32

HUSTON-1P 26

HYATT 31

KILBURN 34

LANCASTER 18, 19

MARCONI 22, 23

MAYOLA-1WB 37

MONROE-1CH 27

MONTI-1WB 37

MUNI-CH 6

NE-ALBANY-WH 38

NE-APSLEY-WH 38

NE-BRAMHAM-BZ 38

NE-RYDALL-CH 38

NICHOLSON 20

STROBINO-1WB 37

TURNER 35

VERNER-1WBRE 37

VILANA-TLGO 34

WELLES 30

Page 51: Endon LIghting Ltd supplement 2013

third party’s intellectual property rights arising out of or in connection with the seller’s use of the specification. This clause shall survive termination of the contract.

11. RETENTION OF TITLE11.1 In spite of delivery having been made, property in the goods shall not pass from the seller until full payment of the price and all other sums owed by the buyer to the seller in cleared funds by the buyer.

11.2 Until payment in full for the goods, the buyer shall hold the goods on a fiduciary basis as bailee for the seller. The buyer shall store the goods separately from all other goods in its possession and marked in such a way that they are clearly identified as the seller’s property.

11.3 Whilst the buyer has the right to dispose of the goods in the ordinary course of business on a bona fide sale without notice to the seller’s rights hereunder, the entire proceeds of sale or otherwise of the goods shall be held in trust for the seller until payment in full for the goods. 11.4 Until payment in full for the goods the buyer hereby grants to the seller the right to enter any premises where the goods are stored in order to re-possess or inspect them.

11.5 The buyer appoints the seller as his agent with full authority to execute on his behalf any document or instrument which may be required in order to perfect the seller’s title and interest in the goods.

11.6 The buyer shall not be entitled to pledge or in any way charge by way of security for any indebtedness any of the goods which remain the seller’s property, but if the buyer does so all monies owing by the buyer to the seller shall (without prejudice to any other right or remedy of the seller) forthwith become due and payable.

12 BREACH AND INSOLVENCYIf the buyer breaches any condition of these conditions or the contract or becomes subject to an administration order or the buyer becomes bankrupt or has a receiver appointed for or distress is levied on any part of its assets or business or goes into liquidation or makes anycomposition with its creditors, or ceases or threatens to cease to carry on all or substantially the whole of its business, the seller shall be entitled (whether in respect of this contract or any other) to:

12.1 withhold any further deliveries to the buyer and/or cancel the contract without any liability;

12.2 appropriate any payments made by the buyer to such of the goods (whether supplied under this contract or any other) as the seller shall think fit;

12.3 immediate payment of all such sums whatever owing by the buyer to the seller notwithstanding any previous agreement to the contrary; and/or

12.4 exercise any of its rights pursuant to Clause 11.

13 FORCE MAJEUREThe seller shall not be liable for any default in its obligations under this contract due to any event such as (but not limited to) an act of God, war, strikes, lock-outs or other industrial action, difficulties in obtaining labour or parts, governmental or other restrictions or regulations or other event beyond the reasonable control of the seller.

14. GENERAL14.1 All disputes arising out of or in connection with the contract shall be governed by English law and subject to the exclusive jurisdiction of the courts of England.

14.2 The contract and the rights granted under the conditions shall not be assigned by the buyer without the prior written consent of the seller. Any assignment or purported assignment by the buyer shall be wholly void and ineffective unless made in conformity with this condition.

14.3 Any notices must be in writing and may be delivered by hand, first class post, special delivery post, fax or email, addressed to the recipient at its registered office or to any other address, fax number or email address as notified in writing to the sender by the other party.

14.4 No term of this contract shall be enforceable under the Contracts (Rights of Third Parties) Act 1999 by a person who is not a party to this contract.

14.5 The buyer shall keep confidential any information they may acquire about the seller and shall not use the information for any purpose other than to perform its obligations under this contract and will ensure that its officers and employees comply with the provisions of this clause.

Endon Lighting Ltd, Units 1-3 Cross Green Way,Leeds LS9 0SE EnglandT: 0113 380 5700 F: 0113 248 4519 E: [email protected]

6 WARRANTY CLAIMS & EXCLUSIONS6.1 The seller warrants that the goods will correspond with their description at the time of delivery.

6. 2 Glass breakages and shortages must be notified in writing within three days of receipt, otherwise responsibility cannot be accepted. Damaged goods must be notified in writing within 10 days of receipt. The seller’s liability shall be limited to, at the seller’s option, replacing the damaged goods or refunding the price of the damaged goods. Under no circumstances shall the liability of the seller whether in contract, tort (including negligence) breach of statutory duty or otherwise exceed the price received for the sale of the goods. Replacements for damaged goods will be charged and credit issued on the return of the damaged goods to the seller in the original packaging. The seller will not accept returned goods without prior written agreement and the issuance of an authorisation number by the seller. Goods returned without such prior agreement and authorisation number will not be credited by the seller who will not be liable for any costs involved. Any goods returned without prior written agreement and authorisation number may at the option of the seller be returned to the buyer for which an additional carriage charge may be made.

6. 3 Nothing in these conditions shall limit or exclude the seller’s liability for fraud or fraudulent misrepresentation or for personal injury or death caused by its negligence or for any matter in respect of which it would be unlawful for the seller to exclude its liability.

6.4 Subject to clause 6.3, the seller shall under no circumstances be liable to the buyer whether in contract, tort (including negligence), breach of statutory duty, or otherwise for any loss of profit or any indirect or consequential loss (including, without limitation, economic loss, loss of business, depletion of goodwill or similar) howsoever caused.

6.5 Save as expressly provided in these conditions all terms, conditions and warranties (whether implied by statute or otherwise or made expressly) whether by the seller or its servants or agents or otherwise relating to the quality and/or fitness for purpose of the goods are excluded. 7. CARRIAGECarriage and packing is free for UK mainland deliveries provided net invoice value is above the current minimum invoice value (excluding VAT) as published from time to time by the seller and obtainable upon request. For invoices that do not meet the current carriage paid value or for deliveries by carrier (at the buyer’s request) carriage and handling will be charged. All goods forwarded at the buyer’s special request by a third party are at their own risk.

8. PRICES8.1 Whilst every endeavour will be made to deliver at the prices quoted, the seller reserves the right to invoice at the price ruling at the date of delivery. The price is exclusive of VAT which shall be due at the rate ruling at the date of the seller’s invoice.

8.2 The buyer shall pay all amounts due under the contract in full without any deduction or withholding except as required by law and the buyer shall not be entitled to assert any credit, set-off or counterclaim against the seller in order to justify withholding payment of any such amount in whole or in part. The seller may at any time, without limiting any other rights or remedies it may have, set off any amount owing to it by the buyer against any amount payable by the seller to the buyer.

9. PRODUCT INFORMATIONAlthough the seller shall use its best endeavours to ensure that the information contained in the seller’s catalogue is correct at the time of going to press, the seller shall not be under any liability for any damage, loss or expense resulting from any error or omission contained in the seller’s catalogue. All measurements given are in millimetres and are approximate.

10. DESIGN CHANGES AND INTELLECTUAL PROPERTY 10.1 The seller’s policy is one of continuing development and improvement. Consequently, the seller reserves the right to change or amend specifications without prior notice.

10.2 No right or licence is granted to the buyer in respect of the intellectual property rights of the seller except the right to use, or re-sell the goods in the buyer’s ordinary course of business.

10.3 To the extent that the goods are to be manufactured in accordance with a specification supplied by the buyer, the buyer shall indemnify the seller against all liabilities, costs, expenses, damages and losses (including any direct, indirect or consequential losses, loss of profit, loss of reputation and all interest, penalties and legal and other reasonable professional costs and expenses) suffered or incurred by the seller in connection with any claim made against the seller for actual or alleged infringement of a

DEFINITION CLAUSE1.1 The “seller” means Endon Lighting Limited (company number 03626838).1.2 The “goods” means all items which the buyer agrees to buy from the seller.1.3 The “buyer” means the person who buys or agrees to buy the goods from the seller.1.4 The “contract” means a contract for the sale of goods by the seller to the buyer based on these Conditions of Sale.1.5 The singular shall include the plural and vice versa. Headings are for convenience only and do not affect the construction and/or the interpretation of these conditions.

2. FORMATION OF CONTRACT2.1 Orders are only accepted from persons acting in the course of business subject to these Conditions of Sale and the seller shall not be bound by any other terms, written, oral or implied, or which are conditions customary in the trade and whether contained in the buyer’s order forms or not. These conditions shall apply unless expressly varied by the seller in writing.

2.2 The order and these Conditions of Sale constitute the entire agreement between the parties.

2.3 Failure by the seller at any time to require the perfor-mance of any provision of the contract shall in no manner affect the rights of the seller to enforce such provision at a later time.

2.4 No order is deemed to be accepted nor any contract made with the seller until the seller has accepted the order at which point the contract shall come into existence. No order shall be cancelled either in whole or in part without the seller’s written consent.

2.5 A quotation for the goods given by the seller shall not constitute an offer. A quotation shall only be valid for a period of 14 days from its date of issue.

2.6 Any samples, drawings, descriptive matter, or advertising produced by the seller and any descriptions or illustrations contained in the seller’s catalogues or brochures are produced for the sole purpose of giving an approximate idea of the goods described in them. They shall not form part of the contract nor have any contrac-tual force and this is not sale by sample.

2.7 In addition to the rights and remedies contained in these conditions, the seller shall have all the rights and remedies afforded to a seller pursuant to any rule of law. All rights and remedies of the seller under the conditions shall be cumulative and not in the alternative.

3. TERMSUnless otherwise agreed in writing by the seller, accounts are net and payment is due on the last day of the month following that in which the goods were despatched. Time for payment shall be of the essence. Interest on overdue invoices shall accrue from the date when payment becomes due until the date of payment at a rate of 2% per annum above Barclays Bank Plc base rate from time to time in force as well after as before any judgment.

4. DELIVERY4.1 Although the seller shall make every effort to deliver on the date in the contract, time for delivery shall not be of the essence and the seller shall not be liable for any loss or damage resulting from any delay in delivery.

4.2 The seller may deliver the goods by separate instalments. Each separate instalment shall be invoiced and paid for in accordance with the contract provisions. Failure of the buyer to pay for any one or more of the said instalments of the goods on the due dates shall entitle the seller:

4.2.1 without notice to suspend further deliveries of the goods pending payment by the buyer; and/or4.2.2 to treat the contract as repudiated by the buyer.

4.3 If the buyer refuses to accept delivery, the goods may be stored by the seller at the buyer’s risk and expense until the buyer accepts delivery

4.4 Acceptance of delivery of the goods will be deemed conclusive evidence of the buyer’s acceptance of these Conditions of Sale.

5 DELIVERY AND RISKThe place of delivery shall be at the seller’s premises or as the seller shall otherwise nominate. If the buyer so requests and pays the charges provided for in Condition 7, the seller shall arrange delivery to the buyer, but this shall be at the buyer’s risk. The risk of loss or damage to goods shall pass to the buyer when the goods are released by the seller to the carrier authorised to deliver the goods. The buyer shall be responsible for all costs of insurance of the goods from the time that risk of loss or damage passes to the buyer.

CONDITIONS OF SALE

Page 52: Endon LIghting Ltd supplement 2013

ENDON LIGHTING LTD,AN NLC COMPANY GROUP

Units 1-3, Cross Green Way, Cross Green Industrial park,

LEEDS, LS9 0SE, United Kingdom

Tel. 0113 380 5700 Fax. 0113 248 4519 [email protected] www.endon.co.uk