End suction pumps
-
Upload
saibabatraders -
Category
Business
-
view
143 -
download
0
description
Transcript of End suction pumps
END SUCTION PUMPS
End Suction Pumps are all non- self-priming single-stage, centrifugal volute pumps with axial suction port, radial discharge port and horizontal shaft. These pumps are coupled pumps with TEFC squirrel cage induction motors with main dimensions complying with IEC standard. These pumps have the discharge range from up to 2700 m3/h & head range from 129 m. End suction centrifugal pump suitable for multi-purpose application. SAER End suction Pumps come in two ranges:-
1) End Suction Pumps dimensions according EN 733
2) End Suction Pumps dimensions exceeding EN 733
3) END SUCTION PUMPS ACCORDING TO EN 733
Operation Condition:-
Max Head 129 M (423 ft)Max Capacity : 675 m3/hr Temp of Pumped Liquid : -15°C up to +120°CFrequency : 50 HzRPM : 2900
Other Materials Available on offer:-
Carbon Steel, Brass, Stainless steel, SS-316, Cast Iron
Features:-
The motor unit and the rotating part of the pump can be taken away without removing the pump body from the system piping.
Closed impeller dynamically balanced and with balance holes for the balancing of the axial thrust.
Shaft completely in stainless steel, greased ball bearings, flanges (UNI EN 1092-2): up to DN
NCB : bare shaft end-suction centrifugal pumps,
NCBZ : bare shaft end-suction centrifugal pumps with electric motor, on a base.
NCBT : bare shaft end-suction centrifugal pumps with dimensions exceeding
APPLICATIONS
Recycling plants
Heating, air conditioning
Heat recovery
Plants of water supply procurement,
Pressurizing units
Fire-fighting systems.
SPECIAL VERSIONS
Constructive materials
Different mechanical seals
Special tensions
ACCESSORIES ON REQUEST
Kit counter flanges
Motors with PTC protection
END SUCTION PUMPS WITH DIMENSIONS EXCEEDING EN 733
Operation Condition:-
Max Head : 97 M (318 ft)Max Capacity : 2300 m3/hr Temp of Pumped Liquid : -15°C up to 90°CRpm : 2900Frequency : 50 HzDN aspiration : DN200 to DN350 DN delivery : DN150 to DN300;
Features:-
Hydraulics : pump body with dimension and performances exceeding
EN 733 rules, closed impeller dynamically balanced and with balance holes for the balancing of the axial thrust.
Shaft completely in stainless steel, greased ball bearings (oil lubricated on request), flanges (UNI EN 1092-2): PN16
Shaft seal : stuffing box seal, mechanical seal on request.
NCBK : bare shaft end-suction centrifugal pumps,
6NCBKZ : bare shaft end-suction centrifugal pumps with electric motor, on a base.
APPLICATIONS
Recycling plantsHeatingAir conditioningHeat recoveryPlants of water supply procurement,Pressurizing units Fire-fighting systems.
SPECIAL VERSIONS
Version with oil lubricated bearingConstructive materials Different mechanical seals Special tensions