End of chapter problem 5

EC202-Computer Aided Design

PRACTICAL EVALUATION FORM

NAME:………………………………………………………. CLASS.: ………………

REGISTRATION NO.: ………………………………………

END OF CHAPTER PROBLEM: 5

APPLICATION OF AUTOCAD PACKAGE IN TECHNICAL AND ELECTRICAL

DRAWINGS: ELECTRONIC SCHEMATIC CIRCUIT & GENERATE DRAWING

OUTPUT

No.

Skill

i. Accuracy

ii. Within time frame

Excellent

(8-10 marks)

Average

(5-7 Marks)

Weak

(0-4 Marks)Total

1. Setting drawing limits & display grid

2. Create layer

3. Layer Border

4. Insert Block Components

5. Layer Components

6. Layer Wiring

7. Layer Text Label

8. Print out drawing

Sub-Total /80

No. Report Total

1. Reflection /10

Sub-Total /10

Total /90

amy/khk/jke/puo EC11.1


END OF CHAPTER PROBLEM: 5

TITLE : APPLICATION OF AUTOCAD PACKAGE IN TECHNICAL AND

ELECTRICAL DRAWINGS

COURSE LEARNING OUTCOME:

CLO 5: Produce with precision the drawings of graphics, electronic circuits

schematics and electrical wiring layout diagrams faster and neat.

OBJECTIVES: The students should be able to:

1. Draw accurately and neatly electronic schematic drawings.

2. Insert Block drawings from other drawing files and make use of the

Explode command to break block drawings into individual entities.

3. Make use of the AutoCAD commands such as the Draw, Edit, Drawing

Aid commands skillfully to produce technical drawings.

EQUIPMENT : 1. Desktop Computer/Laptop

2. AutoCAD 2004 software

PROCEDURE:

1. Create a new drawing space using the Metric measurement.

2. Set the drawing limits to A4 paper size.

3. Display the grid to the extent of all drawing limits.

4. Create layers and rename the layers as below:

i. Border

ii. Components

iii. Schematic Wiring

iv. Text

5. Make the layer Border as the current layer and redraw Fig. 11.1.



6. Refer to Fig. 11.2:

Make the layer Components as the current layer.

Using the Insert command, insert the basic electronic components from the

‘Basic Electronics’ file into the drawing space and rearrange the

components.

Make layer Schematic Wiring as the current layer and make the wiring

connections.

Make layer Text as the current layer and rewrite the numerical and

component values of the components respectively.

7. Print the drawing file as follows:

i. Layer Border.

ii. Layers Border and Components.

iii. Laers Border, Components and Schematic Wiring.

iv. Layers Border, Components, Schematic Wiring and Text.

8. Save the drawing file and exit AutoCAD.

Fig. 11.1: Drawing Border & Title Block



Fig. 11.2: Schematic Circuit of a Sensor

REFLECTION:

At the end of this practical work, I have learnt that:

…………………………………………………………………………………………………

…………………………………………………………………………………………………

…………………………………………………………………………………………………

…………………………………………………………………………………………………

…………………………………………………………………………………………………


End of chapter problem 5

Education

Transcript of End of chapter problem 5