Encore Powder Feed Center - Nordson
Transcript of Encore Powder Feed Center - Nordson
Fast color change in a simple, compact and easy-to-operate feed center
Encore® Powder Feed Center
Features and benefitsNordson’s Encore Feed Center combines all the features and benefits available in fast color change system feed centers with easy operation – and even more. The many features of our Encore Feed Center include:
• Compact design for smaller system footprint
• Simple and readily accessible controls for ease of operation
• High pressure purge for contamination-free color change
• Accommodates plastic square hopper, plastic rectangular hopper and powder box (includes vibratory table and local fluidizing options)
• Allows for both reclaim and virgin powder supplies
• Sieve location assures no adverse effect on cyclone efficiency as well as single point cleaning
• Open sieve design makes for easy visual inspection
• Ultrasonics available for further optimization of finish quality
Additional features provide reliable and repeatable performance – during both operation and color change
Additional features include:
• Twenty-seven pump capacity
• One piece lance with nine In-Line pump stations
• Pneumatic lift assembly for smooth up and down pump lance positioning
• Integrated LED light fixture
6
52
4
1
1 Simple and durable pump locking device for reliable seal and repeatable positioning of the delivery pumps
2 Air cylinder clamping mechanism to lock and seal lance assembly
3 Tapered guides for precise pump lance positioning
4 Two level sensors for consistent powder feed level in both hoppers and boxes, as well as controlling virgin and reclaimed powder
5 Easy clean 15" (375 mm) vibratory sieve for fast color change and optimum finish quality
Encore® Powder Feed Center
Nordson Industrial Coating Systems
100 Nordson Drive Amherst, OH, 44001 USA
Phone: +1.440.985.4000 www.nordson.com/ics
Find your local Nordson office: www.nordson.com/icslocations
/NordsonICS/Nordson_Coating
/company/nordson-industrial-coating-systems
© 2018 Nordson Corporation l All Rights Reserved l PWL-18-5708 l Revised 3/18
Encore Powder Feed Center Specifications and Utility Requirements
Voltage (Amps) 230/3/60 (6.5 amps)460/3/60 (3.2 amps)415/3/60 (3.7 amps)575/3/60 (2.6 amps)380/3/50 (4.1 amps)380/3/60 (4.1 amps)200/3/50 (7.1 amps)200/3/60 (7.1 amps)
Air Input Size 1” BSPT with NPT Adapter
Air Consumption @ 100 PSI Sieve Motor
45 SCFM Normal Operation
360 SCFM Maximum (Instantaneous flowrate during purge sequence)
Sieve Motor .13 HP (.095 KW in).06 HP (.043 KW out)0.4/0.2 amps
Vibratory Table Motor .18 HP (.13 KW)
203
1720
1200
2246 1834
1300
1209 1407
203
1720
1200
2246 1834
1300
1209 1407