en1090 - WPS Library · of ISO 3834. Dal 1/07/2014 è entrata in vigore la normativa EN 1090 che...
Transcript of en1090 - WPS Library · of ISO 3834. Dal 1/07/2014 è entrata in vigore la normativa EN 1090 che...
en1090 - WPS Library
WPS (Welding Procedure Specification)
From 1st July 2014 the EN 1090 became effective which requires all manufacturers of artefacts for civil engineering CE labelling.The application of existing legislation will bring changes in the production process of the companies that will have to adapt by creating internal quality procedures and ensure that the welding process is carried out according to the required specifications of ISO 3834.
Dal 1/07/2014 è entrata in vigore la normativa EN 1090 che impone a tutti i costruttori di manufatti per ingegneria civile la marcatura CE.L’applicazione della normativa vigente porterà cambiamenti nel processo produttivo delle aziende che dovranno adeguarsi creando procedure interne di qualità e assicurarsi che il processo di saldatura sia eseguito secondo le specifiche richieste secondo ISO 3834.
en1090 EN 1090 is made of 3 parts:EN 1090-1: general requirements for structural components conformity (CE marketing)EN 1090-2: technical requirements for steel buildings executions.EN 1090-3: technical requirements for aluminium buildings executions.When the CE labelling will be manufactory for construction products?This rule will be in force starting from 1st Luglio 2014.
For all the execution Class 1 and 2 EXC1/and/EXC2 (the most used) procuts, FIMER will offer a standard production WPS packaging (Welding Procedure Specifications) which will help companies in perfectioning their CE certification of welded products facilitating the procedure.
EN1090 is a serie made of European rules which regulate the manufaturing of steel and aluminium construction products for the realization of civil engineering works.
en1090 La EN 1090 si compone di 3 parti:EN 1090-1: I requisiti generali per la conformità dei componenti strutturali (CE marking)EN 1090-2: Requisiti tecnici per l’esecuzione di strutture di acciaio.EN 1090-3: Requisiti tecnici per l’esecuzione di strutture in alluminio.Quando sarà obbligatorio per i prodotti da costruzione di essere marchiati CE?Qesto regolamento entrerà in vigore il 1 Luglio 2014.
Per tutti i prodotti di Execution Class 1 e 2 EXC1 e EXC2 (i più usati) FIMER offrirà un pacchetto di WPS Standard di produzione (Welding Procedure Specifications) che contribuiranno alle aziende di perfezionare la loro Certificazione CE dei prodotti saldati facilitando la procedura.
La EN 1090 è una serie di normative europee che regolamentano la fabbricazione di prodotti di costruzione di acciaio e alluminio per la realizzazione di opere di ingegneria civile.
Who muSt comPLy to en 1090?All manufacturers who build parts welded steel welded parts for civil enginneering constructions, including the installation on site.
What'S a cLaSS execution exc?The EN 1090-2 requires the work designer to define the level of risk in the manufacturing process, called specifically Class of Execution (EXC). Performing Classes have a field EXC1 to EXC4, Class 1 is the simplest while Class 4 is the most complicated.
• EXC1-Agriculturalbuildings• EXC2-OfficesandResidentialConstruction.Thisisalsothedefaultclasswhennotspecified.• EXC3-Bridgesandotherstructuresexposedtostressorstructuresexposedtoseismicrisk• EXC4-Specialfacilitieswithqualityrequirementsextended
chi dovrà eSSere conforme aLLa en 1090?Tutti i produttori che costruiscono parti saldate in acciaio per construzioni di ingegneria civile, compresi le messa in opera in cantiere.
coS'è una cLaSSe di eSecuzione exc?La EN 1090-2 richiede che il progettista dell’opera definisca il livello di rischio nel processo di fabbricazione, questo è chiamato appunto Classe di Esecuzione (EXC). Le Classi di Esecuzione hanno un campo da EXC1 a EXC4, la Classe 1 è la più semplice mentre la Classe 4 la più complessa.• EXC1-Costruzioniagricole• EXC2-UfficieCostruzioniResidenziali.Questaèanchelaclassedidefaultquandononspecificata.• EXC3-Pontiealtrestruttureesposteastressostruttureespostearischiosismico• EXC4-Strutturespecialiconrequisitidiqualitàestesi
WPS (Welding Procedure Specification)
QuaLification Procedure and WPSProcedura di QuaLificazione e WPS
for all products and exc1 exc2, such as welded products for residential bui ldings, offices, agricultural bui ldings etc ... fimer offers WPS package, a serie of certi fications made according to iSo 3834 by accredia.
this will provide a significant support to the customer, who will not have to run the entire chain qual ity for the preparation of WPS, but will have to qual i fy the personnel, equipment and materials.
Per tutti i prodotti exc1 e exc2, come ad esempio prodotti saldati per costruzioni residenzial i, uffici, costruzioni agricole ecc... fimer offre i l WPS packag, una serie di certi ficazioni real izzate secondo iSo 3834 da accredia.
ciò costituirà un notevole supporto al cl iente, che non dovrà eseguire tutta la catena qual itativa per la stesura della WPS, ma dovrà comunque qual i ficare i l personale, le attrezzature ed i material i.
Approvigionamento materiale certificato:
materiale base, materiale d'apporto (filo, gas, ecc...), attrezzatura, certificazione saldatore
inizio prove di saldatura e stesura pWPS
Certified supply material:base materials, filler material (wire, gas, etc ...),
equipment, welder certification
Start welding testsand pWPS drawing up
SteP
1.
the whole process was performed by fimer to provide the final solution WPS user.
L'intero processo è stato eseguito da fimer per fornire la soluzione finale WPS
all'uti l izzatore.
Esecuzione controll i:visivi l iquidi penetranti
non distruttivi, radiografie, distruttivi, prove meccaniche
Stesura WPQR
StesuraWPS
Checking execution:Penetrant visual l iquids, non-
destructive x-rays, destructive mechanical tests
WPQR drawing up
WPS drawing up
SteP
2.
SteP
3.
reSuLtS
WPS (Welding Procedure Specification)
SAVING:the average saving for a l ittle/medium company which requires a minimum of n° 5 WPS has been calculated on 6.000,00 euro.
QUALITY:fimer WPS are certi ficated by accredia according to iSo 3834.
METHOD:the purchase of WPS packaging is needed only for the first machinery the company (final user) will be registered into fimer system which will recognize the registration for the next purchased ones.
RISPARMIO:il risparmio medio per una piccola/media azienda che richiede almeno n.5 WPS è stato calcolato di almeno 6.000,00 euro.
QUALITA’:Le WPS fimer sono certi ficate da accredia secondo iSo 3834.
METODO:L'acquisto del pacchetto WPS è solo per i l primo impianto. L’azienda (utl izzatore finale) verrà registrata nel sistema fimer che riconoscerà la registrazione per i futuri impianti acquistati.
QUALITY
METHOD
SAVINGS
vantaGGi
advantaGeS
WPS (Welding Procedure Specification)
PROGRAMWPS
PROGRAMMA
WPS NAME POSITION JOINTGIUNTO
BASE MATERIALMATERIALE DI
BASE
FILLER MATERIALMATERIALE
DI APPORTO
RANGE(mm)
PROTECTION GASGAS
DI PROTEZIONE
S3.1 S3.1 PA BWAcciaio
(S355J2)G3 Si1 2.1 – 3.9
82%Ar18%CO2
(M21)
S3.2 S3.2 PC BWAcciaio
(S355J2)G3 Si1 2.1 – 3.9
82%Ar18%CO2
(M21)
S3.3 S3.3 PG BWAcciaio
(S355J2)G3 Si1 2.1 – 3.9
82%Ar18%CO2
(M21)
S3.4 S3.4 PB FWAcciaio
(S355J2)G3 Si1 2.1 – 3.9
82%Ar18%CO2
(M21)
S3.5 S3.5 PF FWAcciaio
(S355J2)G3 Si1 2.1 – 3.9
82%Ar18%CO2
(M21)
STANDARD PROGRAMS 3mm - Ø 1.0 mm
PROGRAMWPS
PROGRAMMA
WPS NAME POSITION JOINTGIUNTO
BASE MATERIALMATERIALE DI
BASE
FILLER MATERIALMATERIALE
DI APPORTO
RANGE(mm)
PROTECTION GASGAS
DI PROTEZIONE
S12.1
S12.11PASS
PA BWAcciaio
(S355J2)G3 Si1 3.0 – 24.0
82%Ar18%CO2
(M21)S12.1
2-3PASS
S12.14PASS
S12.2
S12.21-2PASS
PC BWAcciaio
(S355J2)G3 Si1 3.0 – 24.0
82%Ar18%CO2
(M21)S12.23PASS
S12.24-5-6PASS
S12.3
S12.31PASS
PF BWAcciaio
(S355J2)G3 Si1 3.0 – 24.0
82%Ar18%CO2
(M21)S12.3
2-3PASS
S12.34PASS
S12.4S12.4
1-2-3PASSPB FW
Acciaio(S355J2)
G3 Si1 6.0 – 24.082%Ar18%CO
2
(M21)
S12.5
S12.51PASS
PF FWAcciaio
(S355J2)G3 Si1 6.0 – 24.0
82%Ar18%CO2
(M21)S12.52PASS
STANDARD PROGRAMS 12 mm - Ø 1.2 mm
miG/maG Standard
WPS ProGramS
PROGRAMWPS
PROGRAMMA
WPS NAME POSITION JOINTGIUNTO
BASE MATERIALMATERIALE DI
BASE
FILLER MATERIALMATERIALE
DI APPORTO
RANGE(mm)
PROTECTION GASGAS
DI PROTEZIONE
P3.1 P3.1 PA BWAcciaio
(S355J2)G3 Si1ER70-S
2.1 – 3.982%Ar18%CO
2
(M21)
P3.2 P3.2 PC BWAcciaio
(S355J2)G3 Si1ER70-S
2.1 – 3.982%Ar18%CO
2
(M21)
P3.3 P3.3 PB FWAcciaio
(S355J2)G3 Si1ER70-S
2.1 – 3.982%Ar18%CO
2
(M21)
PULSED PROGRAMS 3 mm - Ø 1.0 mm
PROGRAMWPS
PROGRAMMA
WPS NAME POSITION JOINTGIUNTO
BASE MATERIALMATERIALE DI
BASE
FILLER MATERIALMATERIALE
DI APPORTO
RANGE(mm)
PROTECTION GASGAS
DI PROTEZIONE
P12.1
S12.11PASS
PA BWAcciaio
(S355J2)G3 Si1ER70-S
3.0 – 24.082%Ar18%CO
2
(M21)S12.1
2-3-4-5PASS
S12.16PASS
P12.2
S12.21PASS
PC BWAcciaio
(S355J2)G3 Si1ER70-S
3.0 – 24.082%Ar18%CO
2
(M21)S12.2
2-3PASS
S12.24PASS
P12.3 1-2-3PASS PB FWAcciaio
(S355J2)G3 Si1ER70-S
6.0 – 24.082%Ar18%CO
2
(M21)
PULSED PROGRAMS 12 mm - Ø 1.2 mm
miG/maG PuLS
WPS (Welding Procedure Specification)
funzionamento e meSSa in ServiziooPeratinG and StartuP
Sarà sufficiente contattare fimer per acquistare i l packaging previa registrazione con i dati identi ficativi dell'azienda - nome ed indirizzo.
riceverete i l packaging completo di:• l ibreria cartacea con 16 WPS• l ibreria in Pdf su uSB ed Sdcard con programmi WPS precaricati
it will be easy contacting fimer to buy the packaging - after a registration with company identifing dates - name and address
you will receive the packaging including:• paper l ibrary with 16 WPS• Pdf l ibrary on uSB and Sd card together with previolusly installed WPS programs
tm 236evo
tm335evo
tm355evo
tm415evo
KronoS 500
Queen 212evo
Queen 226evo Syn
KinG320evo
KinG350evo
KinG410evo
KinG515evo
PULSED SERIES
SYNERGIC SERIES
the ranGeLa Gamma
910.
200.
187
REV
03
via J.f. Kennedy - 20871 vimercate (mB) italy - Phone: +39 039 98981 - fax +39 039 6079334
www.fimer.com - [email protected]