Emission measurements of air pollutants and odours · Chemical analysis Technology Vehicle...
Transcript of Emission measurements of air pollutants and odours · Chemical analysis Technology Vehicle...
www.MuellerBBM.com
Emissionmeasurementsofairpollutantsandodours
Notified body (§ 29 b BImSchG, Germany) · Functional tests · Calibration · Combustion conditions
Buildings
Room acousticsMedia and communication technologyBuilding acousticsThermal building physicsBuilding climatologySustainabilityFire protectionStructural dynamicsBuilding Pollutants
Environment
Immission control:Air pollution control, Noise control,Vibration control, Light,Electromagnetic fieldsLicensing managementEnvironmental compatibilityPlant safetyLegally compliant business organizationRisk assessmentChemical analysis
Technology
Vehicle acousticsShip acousticsRailway technologylndustrial plant acousticsMachine acoustics and machine dynamicsPsychoacousticsMobile communicationProduct tests
Headquarters
Müller-BBM GmbHRobert-Koch-Strasse 1182152 Planegg / MunichGermanyPhone + 49 89 85602-0Fax + 49 89 85602-111
Comprehensive solutions from a single source
Our strengths:consulting, planning, measuring, expert reports, research
Müller-BBM GmbH is a subsidiary of Müller-BBM Holding AG, with headquarters in Planegg near Munich. Since 1962 Müller-BBM has been advising clients nationally and internationally and is now one of the world’s leading engineering firms. Over 400 highly qualified employees form an interdisciplinary team of architects, scientists and engineers in the most diverse specialist fields. The company cur-rently has thirteen offices in Germany and other locations in Austria, Switzer land and Russia.
Notification
Müller-BBM is a notified body in Germany in accordance with § 29 b of the
Federal Pollution Control Act (BlmSchG). The notification refers to
• the determination of emissions and immissions of air pollutants, noise,
and vibration
• the verification of the proper installation, functioning and calibration of
continuous emission monitoring systems as well as for the verification
of combustion conditions
Accreditation
Our test and calibration laboratories are accredited according to ISO/IEC 17025:
• testing laboratory for sound and vibration, electromagnetic fields and light
• test laboratory for immission protection, measurements of hazardous substan-
ces and chemical analysis
• acoustic test laboratory for materials, components and equipment
• calibration laboratory for acceleration and acoustical parameters
Expert witness activities
• Experts in accordance with § 29 a BlmSchG
• Publicly appointed and sworn experts for
· assessment of emissions from combustion processes
· environmental approval processes ·
· environmental impact assessments ·
· pollutants in buildings
· electromagnetic compatibility with the environment
· heat and moisture protection ·
· building acoustics and room acoustics
· energy-efficient construction and refurbishment
• VAwS experts
For further information on scope and international validity and on the respective
certificates please, visit www.muellerbbm.com/quality
www.MuellerBBM.com
Notified body in accordance with § 29 b BImSchG
Asanaccreditedtestinglaboratoryaccordingto§29bofthe
GermanFederalEmissionControlAct(BImSchG),weperform
emission measurements of air pollutants and odours for all
kinds of industrial, commercial, and agricultural plants. We
performsamplings,measurements,andanalysesofthewhole
spectrumoforganicandinorganicairpollutants.Thepermits
forpowerstationsandindustrialplantsinvolverequirements
withlimitvaluesforemissions.Thepermitauthoritiesofthe
federalstatesofGermanydonotcontrolthecompliancewith
thelimitvaluesthemselvesbutacknowledgetestinglaborato-
riesbasedon§29bBImSchG.Thetechnicalequipmentofour
§ 29b testing laboratory meets the state-of-the-art require-
ments.Allmeasurementinstrumentsandanalysisdevicesare
subjecttoregularinspectionsandthemoststringentquality
demands.
The majority of our engineers and technicians do not only
have a university degree or a specific technical training but
canalsolookbackonalongstandingprofessionalexperience
inthefieldofatestinglaboratory‘swork.
The acknowledgement of Müller-BBM GmbH according to
§29bBImSchG is basedonour accreditation according to
DINENISO/EC17025andcomprisesthefollowingareas:
Emissionandambientairmeasurementsaswellas
determinationofemissions,exposures,andchecking
theproperinstallation,function,andcalibrationof
continuouslyoperatingmeasurementappliancesfor
•inorganicgases
•dustanddustcomponents
•organiccompounds.
Determinationofemissionsofspecialdust-likesubstances,
particularlyfibre-likedustsandanalysesofrespective
emissionandexposuresamples
Emissionandambientairmeasurementsaswellas
determinationofemissionsofandexposurestohighly
toxicorganic-chemicalcompoundsinextremelylow
concentrations(dioxinsandfurans)andanalysisby
mas|münsteranalyticalsolutionsgmbH,ananalysis
laboratorywithintheMüller-BBMgroupacknowledged
accordingto§29bBImSchG
Determinationofemissionsandexposurestoodours
Determinationofemissionsandexposurestonoisesand
vibrations
Emissionmeasurementsofairpollutantsandodours
Emission measurements of air pollutants and odours
Corresponding to the large scopeof the acknowledgement
according to § 29b BImSchG, Müller-BBM offers to plant
operatorsawidespectrumofvariousmeasurementsamong
whichare:
classiccombustionfluegasessuchascarbonmonoxide,
nitrogenoxide,sulphurdioxide,carbondioxideand
methane
dustandsubstancescontainedindust,e.g.antimony,
arsenic,lead,cadmium,chromium,cobalt,copper,
manganese,nickel,palladium,thallium,vanadium,tin,etc.
fibrousdusts:asbestos,artificialmineralfibres
organiccompounds:benzene,toluene,xylenes,
ethylbenzenes,ethylacetates,polycylcicaromatic
hydrocarbons,aldehydes,phenols,amines,andmany
more
highlytoxiccompounds:dioxins,furans,polychlorinated
biphenyles,polychlorinatedphenols,andmanymore
inorganiccompounds:hydrochloricacid,hydrocyanicacid,
hydrogensulphide,hydrofluoricacid,chlorine,etc.
organosiliconcompounds
odours
Wechoosethemeasurementandanalysisprocedurewhichis
bestsuitablefortherespectivemeasurementtaskandsupport
youwithourexperiencee.g. in the solutionofproduction
andprocess-specificproblems.Furthermore,wehelpyouop-
timizingyourplant technologyaswell asadjustingfluegas
treatmentinstallationsaimingatreducingemissionsasmuch
aspossible.
Inspection of combustion conditions and optimization of burn-off quality
TheservicerangeofMüller-BBMalsoincludestheexaminati-
onoftheminimumrequirementsoncombustionconditions
e.g.in:
plantsfortheincinerationandco-incinerationofwaste
(plantsforwhichthe17thBImSchVapplies)
plantsforcremation(plantsforwhichthe27thBImSchV
applies)
amongwhich:
executionofsystemmeasurementswithsuction
pyrometersandoxygenmeasurementdevicesapplied
simultaneouslytochecktheminimumtemperature,dwell
time,andmixingconditions
functionaltestandcalibrationofcontinuousemission
monitoringsystems(CEMS)tocontrolthecombustion
conditionsaccordingto§10and§11ofthe
17thBImSchVaswellasaccordingto§3and§7ofthe
27thBImSchV
measurementmonitoringofmeasurestoreduceemissions
ofnitrogenoxide(NOx),laughinggas(N2O)andammoniac
(NH3)fromincinerationplantsusingselectivecatalyticand
non-catalyticreductionprocedures(SNCR/SCR)
continuousregistrationofemissionsofnitrogenoxides
(NO/NO2),laughinggasandammoniaslip
determinationofthetemperaturewindowtodefinethe
injectionlevelforsecondarymeasurestoreducenitrogen
oxidebymeansoftheSNCR-method
23°Ce = 0.95 | Tatm = 25 | Rf = 56%
73°C
Functional test and calibration of stationary measurement equipment
Müller-BBMisanacknowledgedtestlaboratoryforchecking
theproperinstallation,function,andcalibrationofcontinuous
emissionmonitoringsystems(CEMS).
Theacknowledgementreferstothefollowingprovisionsand
administrativeregulations:
No.5.3oftheTALuft(technicalinstructionsforthe
preventionofairpollution)
1.BImSchV(smallandmediumfiringsystems)
2.BImSchV(emissionlimitofhighlyvolatilehalogenated
organiccompounds)
13.BImSchV(largescalefiringplantandgasturbine
plants)
17.BImSchV(plantsfortheincinerationand
co-incinerationofwastes)
27.BImSchV(plantsforcremation)
30.BImSchV(plantsforbiologictreatmentofwastes)
31.BImSchV(emissionlimitofvolatileorganiccompounds
whenusingorganicsolventsincertainplants)
The operators of the above mentioned plants must contin-
uously monitor and register their pollutant emission by
means of stationary measurement equipment if the plant
outputorthepollutant-specificemissionsexceedpre-defined
thresholds.
Dependingonthetypeofplant(e.g.powerplants,chemical
orwaste incinerationplants), it isnecessary tocontinuously
monitorandregistertheconcentrationsofcarbonmonoxide,
nitrogen oxides, sulphur dioxides, dust, hydrochloric acid,
ammoniac,mercury,orthesumoforganiccompoundsaswell
as the flue gas boundary parameters (temperature, volume
flowrateetc.)usingcalculationprogrammefortheevaluation
oftheemissiondata.
We provide you with our advice when choosing the appro-
priate measurement equipment and installation sites and
executetherequiredcontrollingofthecorrectinstallationof
themeasurementequipmentwithinthescopeofouracknow-
ledgement. This includes the Annual Surveillance Test (AST)
aswell as the calibrationsprescribed in a threeor five-year
interval(QAL2).
Experience in measurements, for example in the following branches:
Coal-firedpowerstations
Biomasspowerplants
Wasteincinerationplants
Boilerandcombustionengineplants
Refineries
Biogasplants
Chemicalindustries
Papermills
Cementmillsandbrickmanufactures
Cremationandanimalbodycremationplants
Asphaltmixingplants
Gravelplantsandquarries
Foragedryingplants
Wastedumpsandsewagetreatmentplants
Foundries
Galvanizingplants
Printingplants
Dryingplants
Paintingplants
Smokehouses
Automobileproductionandautomotivesuppliers
Ceramicsandporcelainindustry
Semiconductorproductionandgrindingdiskfabrication
Müller-BBMoffersyoumeasurements,analysesandsupport
intheinterpretationoftheresultsaswellascontinuingcon-
sultancyfromonesource,furthermoreavarietyofinterdisci-
plinaryservicesforcomplexmissionsandproblems.
Comprehensive competence
Notonlydoweperformemissionmeasurementsinplantsof
allkinds,butwithinthescopeofourmeasuringactivitieswe
alsoofferyouotherextensivetestingandconsultingservices,
suchas:
exposuremeasurements
workplacemeasurementsofhazardoussubstances
environmentalanalytics
Our focus here is set on the emissions and exposure to
noisesandvibrations,odoursandairpollutants,germs,light
andelectromagneticfields.
Relyonourcompetenceandourcomprehensiveexperienceinmeasurementsinnumeroussectors
© 1
1 | 2
017
Buildings
Building acoustics Room acoustics Media and communications technology Thermal building physics Building climatology Sustainability Fire protection Structural dynamics Building pollutants
Environment
Noise control
Air pollution control
Vibration control
Light and electromagnetic fields
Environmental compatibility
Plant safety
Legally compliant business organization
Risk assessment
Chemical analysis
Technology
Automotive acoustics Ship acoustics Rail technology Industry plant acoustics Machine acoustics and machine dynamics Psychoacoustics Mobile communication Product testing
Comprehensive solutions from a single source
www.MuellerBBM.com
Headquarters
Müller-BBM GmbH Robert-Koch-Strasse 11 82152 Planegg / Munich Germany Phone + 49 89 85602-0 Fax + 49 89 85602-111
Notifications
Müller-BBM is notified as an expert authority in accordance with § 29 b of the
German Federal Pollution Control Act (BImSchG). The notification comprises
• determining emissions and immissions of air pollutants, noise and vibration,
• verifying the correct installation and function in addition to the calibration
of continuous emission measurement systems (CEMS),
• checking combustion conditions.
As a test laboratory, Müller-BBM is authorized to render the services of an
independent third-party provider for assessing and examining performance
reliability in accordance with EU regulation no. 305/2011 (Construction
Products Regulation).
Accreditations
Our testing and calibration laboratories are accredited according to ISO/IEC 17025:
• Test laboratory for sound and vibration, electromagnetic fields and light
• Test laboratory for immission protection, measurements of hazardous substances
and chemical analysis
• Acoustic test laboratory for materials, components and equipment
• Calibration laboratory for acceleration and acoustical parameters.
Müller-BBM has a significant number of employees with competency certifi-
cates that were awarded to them on an individual basis. They include publicly
appointed and sworn experts, state-recognised experts and otherwise appointed
and notified experts. The competency certificates are closely associated with
the specific areas of expertise, therefore, their details can be found on the web
pages of the specific areas of expertise.
Notes on the scope of accreditation, the international validity and certificates can
be found on our website at http://www.muellerbbm.com/quality/.
Consulting · Planning · Measuring Expert Opinion · Research
Müller-BBM GmbH is a subsidiary of Müller-BBM Holding AG,
with headquarters in Planegg near Munich. Since 1962 Müller-BBM
has been advising clients nationally and internationally and is now
one of the world’s leading engineering firms. More than 400 highly
qualified employees form an interdisciplinary team of architects,
scientists and engineers in the most diverse specialist fields. The
company currently has twelve offices in Germany as well as branch
offices in Austria and Switzerland.