Ellery · 2012-06-13 · Any mattress used in this crib must be at least 27 1/4 inches (69cm) by 51...

Ellery 3-in-1 Convertible Crib

Adaptable as Your Child Grows Up

Assembly Instruction ManualQuestions? Call Us at 1-800-515-4056

Website: www.lollyandme.com

Adult assembly required due to the presence of small parts, sharp points & sharp edges.

Before assembly, read these instructions. Make sure all pre-assembled parts are tight. Store this instruction manual for future reference.

Our goal is to improve the assembly process for the customer.

If you have any questions during assembly or you are missing parts

Do not return product parts to the retailer before contacting our customer service department for assistance.

Please follow contact instructions on page 9.

Any mattress used in this crib must be at least 27 1/4 inches (69cm) by 51 5/8inches (131cm) with a thickness not exceeding6 inches (15cm).

2

Crib Warnings

Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE . DO NOTuse this crib if the instructions can not be strictly followed.

Failure to follow these warnings and the assembly instructions could result in serious injury or death.

Infants can suffocate on soft bedding. Never add a pillow or comforter.

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.

Strangulation Hazard:Strings can cause strangulation! DO NOT place items with a string around a child’s neck, such ashood strings or pacifier cords. DO NOT suspend strings over a crib or attach strings to toys.

To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothingon loose fasteners.

DO NOT place crib near window where cords from blinds or drapes may strangle a child.

Fall Hazard:When child is able to pull to a standing position, set mattress to lowest position and removebumper pads, large toys and other objects that could serve as steps for climbing out.

Stop using crib when child begins to climb out or reaches the height of 35 in. (89cm). The crib can be converted to a toddler bed for extended use.

Check this product for damaged hardware, loose joints, loose bolts, and other fasteners, missing parts, or sharp edges before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing, damaged or broken. Contact LOLLY & ME at1-800-515-4056 or write to 10301 Bren Road West, # 0-379 Minnetonka, MN 55343 for replacement parts and instructional literature if needed. DO NOT substitute parts.

DO NOT use a water mattress with this crib.

If refinishing, use a non-toxic finish specified for children’s products.

Never use plastic shipping bags or other plastic film as mattress covers as they can cause suffocation.

Infants can suffocate in gaps between crib sides and a mattress that is too small.

Assemble on soft surface to prevent damage to the product finish.

To make it easier to bulid your crib have a friend help during the assembly.

Ensure that all parts and components are located before beginning assembly.

3

Toddler Bed Warnings

Infants have died in toddler beds from entrapment and strangulation. Failure to follow these warnings and the assembly instructions could result in serious injury or death.

NEVER use bed with children under 15 months.

NEVER place bed near windows where cords from blinds or drapes may strangle a child.

The mattress intended for use on the bed shall be a full-size crib mattress having minimum dimensions of 51 5/8 in. (1310mm) in length, 27 1/4in. (690 mm) in width and 4 in. (100 mm) in thickness. Not exceeding 6 in. (15cm) in thickness.

If guardrails are used as the mattress containment means, guardrail(s) provided must be used to avoid the formation of a gap between the mattress and the bed that could cause an entrapment.

The minimum age for a child using this toddler bed shall not be less than 15 months and the maximum weight shall not be greater than 50 lb (22.7 kg).

Do not use casters on the toddler bed.

Do not use a water mattress.

A child could suffocate in small spaces between the toddler bed and solid objects such as a wall or a dresser.

Strangulation Hazard: Do not place bed near windows where cords from blinds or drapes may strangle a child.

Do not suspend strings over a toddler bed for any reason.

Do not suspend strings over a toddler bed for any reason.

Do not place items with a string, cord, or ribbon around a child’s neck, such as hood strings or pacifier cords.

Congratulations on Your Purchase!Thank you for choosing a Lolly & Me product. Don’t worry about the assembly. Inside you will find understandable step-by-step instructions with clear illustrations—it’ll be a piece of cake! If you get stuck, ring us up at 1-800-515-4056. Need a replacement part or is a part missing? Just call us and we’ll get one sent off to you right away.

Remember to complete your product registration card and mail it in to activate your product’s one year limited warranty. You can also go online to www.lollyandme.com and complete it there. Then—and this is the good part— you will be registered in our monthly drawing for a gift to enhance your little ones nursery!

Sincerely, Lolly & Me

Questions? Call Us at 1-800-515-4056Website: www.lollyandme.comEmail: [email protected]

4

Instructions for Assembly

Ellery 3-in-1 Convertible Crib Adaptable as Your Child Grows Up

OKLet’s Put This Baby Together!

5

Adult assembly required due to the presence of small parts, sharp points,and sharp edges.Before assembly, read these instructions. Make sure all preassembled parts are tight and thatall neccessary hardware is included. Store the instruction manual for future reference. Our goalis to improve the assembly process for you, our customer. If you have any questions during assembly or you are missing parts, please contact us directly. Do not contact the retailer.Do not return product parts to the retailer before contacting our customer service department for assistance. We are here for you.

Left & Right End (x2)

Toddler Bottom Rail (x1) Toddler Rail (x1)

6

Parts

DC

A B

Mattress Base (x1) E

Crib Side (x2)

M6x55mm Bolt (x8)

M6x16mm Bolt (x4)

M6x44mm Bolt (x3)

Dowel (x2)

7

Hardware

aa

bb

cc

dd

nellA ”S“

nellA ”L“

hcnerW

hcnerW

STOPIF YOU EXPERIENCE ANY

ISSUES WITH THIS PRODUCT

BEFORE YOURETURN THIS TO

THE RETAILERPLEASE FOLLOW THE

PROCEDURES LISTED ONTHE FOLLOWING PAGE

8

9

PRODUCT ASSITANCE PROCEDURES

IF YOU HAVE ANY QUESTIONS DURING ASSEMBLY OR YOU ARE MISSING PARTS, PLEASECONTACT US DIRECTLY.

PROCEDURES TO FOLLOW SHOULD YOU HAVE ANY QUESTIONS:

FOR THE BEST AND MOST TIMELY SERVICE PLEASE CONTACT US VIA E-mail:[email protected]

phone us at 1-800-515-4056 or write to 10301 Bren Road West, # 0-379 Minnetonka, MN 55343

PLEASE PROVIDE THE FOLLOWING INFORMATION IN YOUR E-mail.

1. YOUR NAME

2. ADDRESS

3. BEST DAY TIME PHONE NUMBER

4. PLACE AT DATE OF PURCHASE

5. MODEL NUMBER, NAME AND COLOR OF YOUR PRODUCT

6. MANUFACTURER’S CODE (THE MANUFACTURER’S CODE CAN BE FOUND ON A LABEL AFIXED TO THE BOX AS WELL AS A LABEL AFIXED TO THE CRIB ITSELF.)

7. SHORT DESCRIPTION OF THE ISSUES AND ATTACH PHOTOS IF POSSIBLE. PLEASE INCLUDE SPECIFIC PART NUMBERS IN QUESTION FOR MORE EFFICIENT SERVICE.

SOMEONE WILL CONTACT YOU VIA E-mail OR PHONE TO HELP YOU WITH YOUR ISSUES.

IF YOU DO NOT HAVE INTERNET ACCESS, PLEASE FAX THE ABOVE INFORMATION TO :612-573-6678

IF YOU DO NOT HAVE INTERNET OR FAX ACCESS, PLEASE CAL US AT 1-800-515-4056 AND BESURE TO HAVE ALL THE ABOVE INFORMATION TO GIVE TO THE CUSTOMER SERVICE REPRESENTATIVE.

WE ARE HERE FOR YOU!

Parts Needed:"L" Allen Wrench Left & Right End (x2) Crib Side (x1)

OR

M6x55mm Bolt (x4)

Attach 2pcs Left & Right End (A) to Crib Side (B) using 4pcs Bolts (aa).

Continue to Step 2...

10

A B

Crib Assembly 1

aa

"S" Allen Wrench

aa

aa

aaA

A

aa

B

Parts Needed: Mattress Base (x1)

Figure 1

Figure 2


11

Rotate out four mattress brackets (one on each end) on (1) Mattress Base (E) as shown (see Figure 1) before attaching to Crib Assembly. Then attach Instruction Envelope (see Figure 2).

E

Crib Assembly2

WarningEnvelope

E

12

Parts Needed:"L" Allen Wrench Mattress Base (x1)

OR

M6x16mm Bolt (x4)

Attach Mattress Base (E) to Cribusing 4pcs Bolts (bb).


E

Crib Assembly 3

bb

"S" Allen Wrench

bb

E

x4 on this bolt assembly zoom

Parts Needed:"L" Allen Wrench Crib Side (x1)

OR

M6x55mm Bolt (x4)

Attach Crib Side (B) to Right and Left Crib End using 4pcs Bolts (aa).


13

B

Crib Assembly4

aa

"S" Allen Wrench

aa

aa aa

aa

EB

14

Please note that there are 3 different heights to adjust the mattress support as your baby grows.Place newborns and non-sitting babies on mattresses positioned on the highest mattresssupport position. (top hole) Once a baby is sitting up, adjust the mattress to the second position so that the baby is lower than the crib railing. (middle hole) When the baby canpull up to the railing, move the mattress to the lowest mattress support position. (Bottom hole).Your mattress must be at the lowest level before the child begins to stand up.

To change the position of the mattress base, unscrew bolts, line up the base with the holes at the desired height and re-attach the mattress base using the same bolts.


Crib Assembly 5

Your Lolly & Me crib is now built. Be sure to gently retighten all bolts to square upthe sides and you are good to go. Well done!

Parts Needed:"L" Allen Wrench

"S" Allen WrenchOR

Remove 4pcs Bolts (aa)and the Front Side (B) from

Crib Assembly as shown.

Continue to Step 7..

15

Toddler Bed Assembly6

aa

aa

aa

aa

B

Parts Needed:"L" Allen Wrench Toddler Bottom Rail (x1) Toddler Rail (x1)

OR

M6x44mm Bolt (x2)

Attach Toddler Rail (D) to Toddler Bottom Rail (C)using 2pcs Bolts (cc).


16

C D

Toddler Bed Assembly 7

cc

"S" Allen Wrench

C

Dcc

cc


OR

M6x55mm Bolt (x2)


17

Toddler Bed Assembly8

aa

"S" Allen Wrench

M6x44mm Bolt (x1)cc Dowel (x2)dd Dowel (x2)

Toddler Rail (x1)

Attach Toddler Rail to Crib using 2pcs Bolts (aa) and 1pcs Bolt (cc) and 2pcs Dowels (dd).

The Lolly&Me toddler rail allows our customer greater flexibilty in usage as rail can be attached at the head of the bed or at the foot. Flip it left to right depending on individual preference.

cc

ddddaa

aa


"S" Allen WrenchOR

Remove 3pcs Bolts (cc) andthe Toddler Rail (D) from Crib Assembly as shown.


18

Day Bed Assembly9

cc

cc

ccD


19

Day Bed10

Parts Needed:

.2.1

3.

After unit is assembled, use thefollowing instructions to keepinstruction manual for future use.

1. Pick up instruction manual.

2. Fold instruction manual in half.

3. Slide instruction manual intowarning envelope attached to mattressbase assembly.

20

Storing Instruction Manual11

Fold Line

21

base and

1-800-515-4056E-mail: [email protected]

Ellery · 2012-06-13 · Any mattress used in this crib must be at least 27 1/4 inches (69cm) by 51...

Documents

Transcript of Ellery · 2012-06-13 · Any mattress used in this crib must be at least 27 1/4 inches (69cm) by 51...