Electrolytic Capacitor Product Specification CE-AFC … Capacitor Product Specification...

Electrolytic Capacitor Product Specification CE-AFC-BE-0-15

A type FC seriesPage No.

Contents

Contents

Scope

Parts Number

Can Size

Standard Rating

Dimensions and Appearance

Constructions

Performance Characteristics

Marking

Others Specifications

Parts Lists

Dimensions

(Snap-in lead formed type)

Taping Shape and Dimensions

Taping Specifications

Notices in using

Aluminum Electrolytic Capacitor

P.1 ～ P.4

P.5

P.6 ～ P.9

P.10

P.10

P.11 ～ P.18

P.19

P.20 ～ P.23

P.24 ～ P.27

P.28 ～ P.31

Remarks

Matsushita Electronic Components Co.,Ltd.　LCR Device Company

Capacitor Business Unit


A type FC series 1

1. Scope Fixed capacitors for use in electronic equipment, Aluminum electrolytic capacitors with non-solid electrolyte.

2. Parts Number

E E U FC 2-1 2-2 2-3 2-4 2-5

2-1 Aluminum Electrolytic Capacitor Type : Radial lead type ( JIS : 04 type )

2-2 FC series

2-3 Rated Voltage Code

Voltage Code 0J 1A 1C 1E 1V 1H 1J 2ARated Voktage (V.DC) 6.3 10 16 25 35 50 63 100

2-4 Capacitance Code : Indicating capacitance in uF by 3 letters.

The first 2 figures are actual values and the third

denotes the number of zeros.

"R" denotes the decimal point and all figures are the

actual number with "R".

For example, 1uF is expressed as 1R0 in this case.

ex. 0. 1μF R10 , 10μF 100 , 1000μF 102

2-5 Suffix Code for Appearance : Special Code for Appearance

Blank Standard Long Lead

E Snap-in lead

H Lead taping For φ4×11,φ5×11,φ6.3×11.2

φ5×15,φ6.3×15

B Lead taping

Refer to page 19 for snap-in lead, page 20 ～ 23 for lead taping dimensions,

And page 24 ～ 27 for lead taping specifications.

Remarks




A type FC series 2

Capacitance and Can Size Table

[μF] at 120Hz 20V.DC

Can Size(φD×L）

68 47 39 27 18 10 6.8100 82 47 39 22 1 12 5.6

100S 56 47 27 2.268 33 3.3

4.710L12151822

150 100 82 56 39 27 18 8.2220 150 100 82 47 33 22 12270 180 120 100S 56 39 33330S 220S 68 47330 220 180 120 82 56 39 18390 330 220 180 100 68 47 22470 390 270 220 120 82 56560 470 330 150 68820L 680L 470L 330L 220L 120L 100L 33L1200L 1000L 680L 470L 330L 180L 150 39L

* L, S = the last letter of part numbers. Examples : EEUFC0J682L…φ12.5×40

EEUFC0J682 …φ16×25EEUFC0J682S…φ18×20

10050 633510 16 25

4×115×11

6.3

5×156.3×11.2

6.3×158×11.5

8×158×20

Remarks




A type FC series 3

Capacitance and Can Size Table

[μF] at 120Hz 20V.DC

Can Size(φD×L）

820 560 390 270 180 100 82 331000 680 470 330 220 120 1001200 820 560 390 270 150 120 39

1000 680 470 330 1801500 1200 820 560 390 220 180 56

1000S 680 470 220X1800 1500 1000 820 560 270 220 68L2200 12002700L 2200L 1500L 1000L 680L 330L 330L 100L

470L1500S 1200S 820S 560S 390S 220S 180S 682700 1800 1500 820S 560S 330 220S 1003300 2200 1000 680 390 3303900 2700 1800 1200 820L 470 390 150

2200 1500 1000 5604700 3300 2700L 1800L 1200L 680L 470L 180L5600L 3900L 3300 2200 1500L 820L 680L 220L6800L 4700L 1800L 1000L 820L 270L2200S 1800S 1200S 1000S 680S 390S 270 120S2700S 1500S4700S 3300S 2200S 1500S 1200 680 470 1805600 3900 2700 1800 1000S6800 4700 3900 2700 1500 1000 560 220

5600 1800 6808200 6800 4700 3300 2200 1200 820 330

1000U10000 8200L 5600L 3900L 2700L 1500L 1000 390L12000L 6800 1800L 1200L 4703300S 2700S 1800S 1200S 820 560S 390S 150S6800S 5600S 3300S 2200S 1500S 820 680S 270S

3900S 1800S10000S 6800S 4700S 3300S 2200S 1200S 820S 330S12000 8200 5600 3900 2700 1800 1200 39015000 10000 8200 4700 3300 2200 1500 560

12000 5600 3900 1800 680

* L, S = the last letter of part numbers. Examples : EEUFC0J682L…φ12.5×40

EEUFC0J682 …φ16×25EEUFC0J682S…φ18×20

16×4018×15

18×35.518×40

18×20

18×2518×31.5

16×31.5

16×35.5

16×20

16×25

12.5×3012.5×3512.5×4016×15

10×25

12.5×25

12.5×1512.5×20

16 25 50 63 1006.3

10×30

10×20

10×12.5

10×16

3510

Remarks




A type FC series 4

3. Standard Ratings

No. Item Ratings

1 Category Temperature Range -55 ～ +105

2 Rated Voltage Range 6.3 ～ 100 V.DC

3 Capacitance Range 1.0 ～ 15000 μF

(120Hz 20)

4 Capacitance Tolerance ± 20%　　　　 (120Hz 20)

5 Surge Voltage R.V. 6.3 10 16 25 35 50 63 100

(V.DC) S.V. 8 13 20 32 44 63 79 125

6 Rated Ripple Current Page 11 ～ Page 18,Table3

7 Impedance Page 11 ～ Page 18

4. Dimensions and Appearance Body Color ( Black Blue ) , Marking ( Gold )

Standard Long Lead (Suffix : Blank)

　　　　　　　　　　　

　　　　[mm]

　　

Body Dia. ΦD 4 5 6.3 8 10 12.5 16 18Lead Space F 1.5 2.0 2.5 3.5 5.0 5.0 7.5 7.5Lead Dia. Φd 0.45 0.5 0.5 0.6 0.6 *1 0.8 0.8

*1 L≦25:0.6, L≧30:0.8

Remarks



or

φ4 ～ 8

φ10≦

min.3

φD+0.5max.

φｄ±0.05

14 min.*L

Ｆ±0.5

Pressure reliefφ6.3≦

*L≦16:L+1.0max.

L≧20:L+2.0max.

[mm]

φ8x15,φ16x15,φ18x15:L+1.5max.


A type FC series 5

5. Constructions

　　　5-1 Inside Construction

　5-2 Construction Parts

Parts Materials Parts Materials

1 Lead Wire Solid tinned copper weld 5 Separator Manila hemp

steel wire

2 Vinyl Sleeve Thermoplastic Resin 6 Anode Foil High purity

Aluminum foil

3 Aluminum Can Aluminum 7 Cathode Foil Aluminum foil

4 Sealing Rubber Synthetic rubber 8 Electrolyte －

Remarks



1 Lead wire

Aluminum lead(5 Separator, 6,7 Anode andInside unit

2 Sleeve

3 Aluminum can

4 Sealing rubberPressure

φ6.3≦

cathode foil, 8 Electrolyte)

relief


A type FC series 6

6. Performance Characteristics

No Item Performance Ｃｈａｒａｃｔｅｒｉｓｔｉｃｓ Test

1 Leakage Current ≦ I = 0. 01CV or 3μA, whichever is greater.I : Leakage current C : CapacitanceV : Rated voltage

2 Capacitance Within the specified capacitancetolerance.

( ≦0.5V for AC.)3 Tangent of Loss Less than the table 1 value of page 10.

Angle(tanδ) Added 0. 02 per 1000μF for items with

over 1000μF. ( ≦0.5V for AC.)4 Impedance 20 Less than the initial limit. : 100 kHz

-10 ( See page 11 ～ 18 ) : 20±2,-10±2: Impedance shall be measured

at a point ( 2mm max. from the surface of a sealing rubber ) of the lead wire.

5 Characteristics at Step 2High and Low Impedance Ratio :Temperature Ratio for the value in step 1 shall be

less than the value from table 2 in page 10. *

Step 4 　　15 minutes

Leakage Current : 2 hours

≦ 800% of the value of item 6. 1. *Capacitance Change : Impedance should be measured at the frequency

Within ±25% of the value in step 1 of 120 Hz±10%.Tangent of Loss Angle (tanδ):

≦ the value of item 6. 3. ※ -25±3,-40±3,-55±3* Capacitors should be stored at each

temperature until measured impedance or capacitance is stabilized.

6 Surge Leakage Current : Test Temperature : 15 ～ 35 ≦ the value of item 6.1.

Capacitance Change : Series Protective Resistance :Within ±15% of the initially measured value.

Tangent of Loss Angle (tanδ): R = Series protective resistance (kΩ)≦ the value of item 6. 3. C =Capacitance (μF)

Appearance : Test Voltage : Surge voltage item 3. 5No significant change can be Applied Voltage : 1000 cycles of 30±5 sec.observed. 　“ON” and 5 min. 30 sec. "OFF"

Time

45

Test Temperature Step

2

1※2

3

Measuring : After 2 minutes

Measuring Frequency

Series Resistor : 1000±10 ΩApplied Voltage : Rated voltage

Measuring Circuit Measuring Voltage

: 120 Hz±20%: Equivalent series circui: +1. 5 ～ 2 V. DC

Measuring Frequency Measuring Circuit Measuring Voltage

: 120 Hz±20%: Equivalent series circui: +1. 5 ～ 2 V. DC

20± 2

Measuring Frequency Measuring TemperatureMeasuring Point

105± 2

20± 2

20±

C

50100R

±=

Remarks




A type FC series 7


7 Robustness of Terminations Diameter [mm] Pull Strength

Tensile φ0.45 ～ 0.5 5 N

φ0.6 ～ 0.8 10 NApplied above steady pull axially for a 10±1

There is no damage or breakage after seconds.

Bending test.Diameter [mm] Static Load

φ0.45 ～ 0.5 2.5 N

φ0.6 ～ 0.8 5 NAt first, a capacitor is placed in vertical position

with the weight specified above being applied to

one of leads. Then the capacitor is slowly

rotated 90°to horizontal position and subsequently returned to vertical position.

The above bending procedure takes for 2 ～ 3

seconds.An additional bending is done in the opposite

direction.

8 Vibration Capacitance : Frequency : 10 ～ 55 HzMeasured value is to be stabilized (1 minute per cycle.)

during test. (Measured several times Total Amplitude : 1. 5 mm

within 30 min. Direction and Duration of Vibration :before completion of test) It is done in the X, Y, Z axis direction for 2

Appearance : hours each, with a total of 6 hours.

No significant change can be Mounting Method :observed. The capacitor shall be fixed with its lead wires

Capacitance Change : at the point of 4 mm from the bottom of

Within ±5% of the initially capacitor body. The capacitor with diametermeasured value. greater than 12. 5 mm or longer than 25 mm

must be fixed in place with a bracket.

9 Solderability More than 3/4 of the terminal surface Solder Type : H60A, H60S, or H63A (JIS Z3282)shall be covered with new solder. Solder Temperature : 235±5

Immersing Time : 2±0. 5 sec.

Immersing Depth : 1. 5 ～ 2. 0 mm from the root.

Flux : Approx. 25% rosin (JIS K5902) in ETHANOL (JIS K8101)

10 Resistance to Leakage Current : Solder Type : H60A, H60S, or H63A (JIS Z3282)

Soldering Heat ≦ the value of item 6.1. Solder Temperature : 260±5 Capacitance Change : Immersing Time : 10±1 sec.

Within ±10% of the initially Immersing Depth : 1. 5 ～ 2. 0 mm from the root.

measured value.Tangent of Loss Angle (tanδ):

≦ the value of item 6. 3.

Appearance :No significant change can be

observed.

Remarks




A type FC series 8


11 Solvent There shall be no damage and legible Class of Reagent : Isopropyl Alcohol

Resistance of marking. Marking can be easily Test Temperature : 20 ～ 25

Marking comprehended. Immersing Time : 30±5 sec.

12 Pressure Relief Pressure relief shall be operated without AC Current Method

( More than any hazardous expulsion or emission of

φ6. 3 diameter flame.

products ) No emission of gas after 30 minutes of

the voltage application also meets the

specification.

Applied Voltage :

AC voltage equals to rated W. V. × 0. 7 or

250 V (rms), whichever is smaller.

(Ω)

≦1

＞1 ≦10

＞10 ≦100

＞100 ≦1000

＞1000 ≦10000

＞10000

* When capacitance is over 10000μF,the value

of series resistance equals to the half of the

tested capacitor’s impedance.

Reverse Voltage Method

≦22.4 1 (const)

＞22.4 10 (const)

Capacitance DC Resistance

0.1±0.01

*

1000±100

100±10

10±1

1±0.1

Nominal Diameter [mm] DC Current (A)

(μF)

～

A～

～

～

R

V C x

V

A. C.

Power supply

50Hz or 60Hz

A :A.C. ammeter R :Ser ies resister

Cx :Tested capacitor:A.C. voltmeter

A

A :D.C. ammeter Cx :Tested capacitor

CxD.C.Power supply

Remarks




A type FC series 9


13 Damp Heat Leakage Current : Test Temperature : 40±2

(Steady state) ≦ the value of item 6.1. Relative Humidity : 90 ～ 95%

Capacitance Change : Test Duration : 240±8 hours

Within ±20% of the initially

measured value. After subjected to the test, capacitors shall

Tangent of Loss Angle (tanδ): be left for 2 hours at room temperature and

≦ 120% the value of item 6. 3. room humidity prior to the measurement.

Appearance :

No significant change can be

observed.

14 Endurance Leakage Current : Test Temperature : 105±2

≦ the value of item 6.1. Test Duration : 1000 +48

0 hours (φ4 ～ φ6.3)

Capacitance Change : : 2000 +72

0 hours (φ8)

Within ±20% of the initially : 3000 +720 hours (φ10)

measured value. : 5000 +720 hours (φ12.5～)

Tangent of Loss Angle (tanδ): : Rated specified ripple current.

≦ 200% of the value of item 6. 3. The sum of DC and ripple peak

Appearance : voltage shall not exceed the rated

No significant change can be voltage.

observed.

After subjected to the test, capacitors shall be left at

room temperature and room humidity for 2 hours prior

to the measurement.

15 Shelf Life Leakage Current : Test Temperature : 105±2

≦ the value of item 6.1. Test Duration : 1000 +480 hours

Capacitance Change :

Within ±20% of the initially

measured value. After subjected to the test with no voltage applied,

Tangent of Loss Angle (tanδ): capacitors shall undergo voltage treatment* and

≦ 200% of the value of item 6. 3. be left for 1～2 hours at room temperature and

Appearance : humidity prior to the measurement.

No significant change can be

observed.

Applied Voltage

Remarks　　　* Voltage treatment : The rated voltage shall be applied to the capacitors, which are connected to series protective

　　　resistors (1000±10 Ω), for 30 minutes as a posttest treatment (performing discharge).




A type FC series 10

7. Marking (1) Markings indicated on the products :

　 a) Rated Voltage.

b) Capacitance

c) Negative Polarity

d) Matsushita Electric Trademark

e) Upper Category Temperature

f ) Series Code

g ) Lot No.

(2) Label On the Packaging Box by English

ａ） Rated Voltage, Capacitance

ｂ） Matsushita Electric Trademark

ｃ） Part Number

ｄ） Packing Quantity

ｅ） Serial No.

ｆ） Manufacturer’s Name

g ) Country of Origin

8. Others　　　　　　　Unless otherwise specified, the product shall conform to JIS C 5141.

Table 1. Tangent of Loss Angle(tanδ)

V.DC 6.3 10 16 25 35 50 63 100D.F. 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07

Added 0. 02 per 1000μF for items with over 1000μF items.

Table 2.Characteristics at low temperature Impedance ratio (at 120 Hz)

V.DC 6.3 10 16 25 35 50 63 100Z(-25)/Z(20) 2 2 2 2 2 2 2 2Z(-40)/Z(20) 3 3 3 3 3 3 3 3Z(-55)/Z(20) 4 4 4 4 4 4 4 4

Table 3.Frequency Correction Factor of Rated Ripple Current

Cap.(μF) 60 120 1k 10k 100k～

1.0～330 0.55 0.65 0.85 0.90 1.00390～1000 0.70 0.75 0.90 0.95 1.001200～2200 0.75 0.80 0.90 0.95 1.002700～15000 0.80 0.85 0.95 1.00 1.00

Ｆrequency　(Hz)

* Rated ripple current shall be calculated as below :

　　Where

I p = I x k f I p = Rated Ripple Current

I = Specified Ripple Current at 100 kHz

k f = Frequency Correction Factor

In case the calculated ripple current is too high and the peak-to-peak ripple voltage exceeds its

rated voltage, the rated ripple current shall be calculated by the following formula.

Where

I p’ =π x f x C x VN / √2 x 10 –6 　 I p’= Rated Ripple Current [ A rms ]

f = Frequency [ Hz ]

C　= Capacitance [uF ]

　 VN= Rated Voltage [V]

Remarks




A type FC series 11

Leakage Rated Ripple

Part No. V.DC Cap. Current CurrentμF μA mA　rms

max. max.*1 +20 -10 φD L φ d

EEUFC0J680 6.3 68 4.2 120 1.300 2.600 4 11 0.45

EEUFC0J101 6.3 100 6.3 175 0.800 1.600 5 11 0.5

EEUFC0J151 6.3 150 9.4 235 0.500 1.000 5 15 0.5

EEUFC0J221 6.3 220 13.8 290 0.350 0.700 6.3 11.2 0.5

EEUFC0J271 6.3 270 17.0 290 0.350 0.700 6.3 11.2 0.5

EEUFC0J331S 6.3 330 20.7 290 0.350 0.700 6.3 11.2 0.5

EEUFC0J331 6.3 330 20.7 400 0.250 0.500 6.3 15 0.5

EEUFC0J391 6.3 390 24.5 555 0.117 0.234 8 11.5 0.6

EEUFC0J471 6.3 470 29.6 555 0.117 0.234 8 11.5 0.6

EEUFC0J561 6.3 560 35.2 555 0.117 0.234 8 11.5 0.6

EEUFC0J821L 6.3 820 51.6 730 0.085 0.170 8 15 0.6

EEUFC0J821 6.3 820 51.6 755 0.090 0.180 10 12.5 0.6

EEUFC0J102 6.3 1000 63.0 755 0.090 0.180 10 12.5 0.6

EEUFC0J122L 6.3 1200 75.6 995 0.065 0.130 8 20 0.6

EEUFC0J122 6.3 1200 75.6 1050 0.068 0.136 10 16 0.6

EEUFC0J152 6.3 1500 94.5 1220 0.052 0.104 10 20 0.6

EEUFC0J152S 6.3 1500 94.5 1205 0.065 0.130 12.5 15 0.6

EEUFC0J182 6.3 1800 113.4 1440 0.045 0.090 10 25 0.6

EEUFC0J222 6.3 2200 138.6 1440 0.045 0.090 10 25 0.6

EEUFC0J222S 6.3 2200 138.6 1690 0.043 0.086 16 15 0.8

EEUFC0J272L 6.3 2700 170.1 1815 0.035 0.070 10 30 0.6

EEUFC0J272 6.3 2700 170.1 1655 0.038 0.076 12.5 20 0.6

EEUFC0J272S 6.3 2700 170.1 1690 0.043 0.086 16 15 0.8

EEUFC0J332 6.3 3300 207.9 1655 0.038 0.076 12.5 20 0.6

EEUFC0J332S 6.3 3300 207.9 2000 0.038 0.076 18 15 0.8

EEUFC0J392 6.3 3900 245.7 1945 0.030 0.060 12.5 25 0.6

EEUFC0J472 6.3 4700 296.1 2310 0.025 0.050 12.5 30 0.8

EEUFC0J472S 6.3 4700 296.1 2205 0.029 0.058 16 20 0.8

EEUFC0J562L 6.3 5600 352.8 2510 0.022 0.044 12.5 35 0.8

EEUFC0J562 6.3 5600 352.8 2205 0.029 0.058 16 20 0.8

EEUFC0J682L 6.3 6800 428.4 2655 0.018 0.036 12.5 40 0.8

EEUFC0J682 6.3 6800 428.4 2555 0.022 0.044 16 25 0.8

EEUFC0J682S 6.3 6800 428.4 2490 0.028 0.056 18 20 0.8

EEUFC0J822 6.3 8200 516.6 3010 0.018 0.036 16 31.5 0.8

EEUFC0J103 6.3 10000 630.0 3150 0.016 0.032 16 35.5 0.8

EEUFC0J103S 6.3 10000 630.0 2740 0.020 0.040 18 25 0.8

EEUFC0J123L 6.3 12000 756.0 3360 0.015 0.030 16 40 0.8

EEUFC0J123 6.3 12000 756.0 3635 0.016 0.032 18 31.5 0.8

EEUFC0J153 6.3 15000 945.0 3680 0.015 0.030 18 35.5 0.8

100kHz

Dim. [mm]Impedance

(Ωmax.)

Remarks　　　　　　*1 100kHz 105




A type FC series 12

Leakage Rated RipplePart No. V.DC Cap. Current Current

μF μA mA　rmsmax. max.*1 +20 -10 φD L φ d

EEUFC1A470 10 47 4.7 120 1.300 2.600 4 11 0.45

EEUFC1A820 10 82 8.2 175 0.800 1.600 5 11 0.5

EEUFC1A101S 10 100 10.0 175 0.800 1.600 5 11 0.5

EEUFC1A101 10 100 10.0 235 0.500 1.000 5 15 0.5

EEUFC1A151 10 150 15.0 290 0.350 0.700 6.3 11.2 0.5

EEUFC1A181 10 180 18.0 290 0.350 0.700 6.3 11.2 0.5

EEUFC1A221S 10 220 22.0 290 0.350 0.700 6.3 11.2 0.5

EEUFC1A221 10 220 22.0 400 0.250 0.500 6.3 15 0.5

EEUFC1A331 10 330 33.0 555 0.117 0.234 8 11.5 0.6

EEUFC1A391 10 390 39.0 555 0.117 0.234 8 11.5 0.6

EEUFC1A471 10 470 47.0 555 0.117 0.234 8 11.5 0.6

EEUFC1A561 10 560 56.0 755 0.090 0.180 10 12.5 0.6

EEUFC1A681L 10 680 68.0 730 0.085 0.170 8 15 0.6

EEUFC1A681 10 680 68.0 755 0.090 0.180 10 12.5 0.6

EEUFC1A821 10 820 82.0 1050 0.068 0.136 10 16 0.6

EEUFC1A102L 10 1000 100.0 995 0.065 0.130 8 20 0.6

EEUFC1A102 10 1000 100.0 1050 0.068 0.136 10 16 0.6

EEUFC1A122 10 1200 120.0 1220 0.052 0.104 10 20 0.6

EEUFC1A122S 10 1200 120.0 1205 0.065 0.130 12.5 15 0.6

EEUFC1A152 10 1500 150.0 1440 0.045 0.090 10 25 0.6

EEUFC1A182 10 1800 180.0 1655 0.038 0.076 12.5 20 0.6

EEUFC1A182S 10 1800 180.0 1690 0.043 0.086 16 15 0.8

EEUFC1A222L 10 2200 220.0 1815 0.035 0.070 10 30 0.6

EEUFC1A222 10 2200 220.0 1655 0.038 0.076 12.5 20 0.6

EEUFC1A272 10 2700 270.0 1945 0.030 0.060 12.5 25 0.6

EEUFC1A272S 10 2700 270.0 2000 0.038 0.076 18 15 0.8

EEUFC1A332 10 3300 330.0 2310 0.025 0.050 12.5 30 0.8

EEUFC1A332S 10 3300 330.0 2205 0.029 0.058 16 20 0.8

EEUFC1A392L 10 3900 390.0 2510 0.022 0.044 12.5 35 0.8

EEUFC1A392 10 3900 390.0 2205 0.029 0.058 16 20 0.8

EEUFC1A472L 10 4700 470.0 2655 0.018 0.036 12.5 40 0.8

EEUFC1A472 10 4700 470.0 2555 0.022 0.044 16 25 0.8

EEUFC1A562 10 5600 560.0 2555 0.022 0.044 16 25 0.8

EEUFC1A562S 10 5600 560.0 2490 0.028 0.056 18 20 0.8

EEUFC1A682 10 6800 680.0 3010 0.018 0.036 16 31.5 0.8

EEUFC1A682S 10 6800 680.0 2740 0.020 0.040 18 25 0.8

EEUFC1A822L 10 8200 820.0 3150 0.016 0.032 16 35.5 0.8

EEUFC1A822 10 8200 820.0 3635 0.016 0.032 18 31.5 0.8

EEUFC1A103 10 10000 1000.0 3680 0.015 0.030 18 35.5 0.8

EEUFC1A123 10 12000 1200.0 3735 0.014 0.028 18 40 0.8

100kHz

Dim . [mm]Impedance

( Ω max.)

Remarks　　　　　　*1 100kHz 105




A type FC series 13

Leakage Rated RipplePart No. V.DC Cap. Current Current

μF μA mA　rmsmax. max.*1 +20 -10 φD L φ d

EEUFC1C390 16 39 6.2 120 1.300 2.600 4 11 0.45

EEUFC1C470 16 47 7.5 175 0.800 1.600 5 11 0.5

EEUFC1C560 16 56 8.9 175 0.800 1.600 5 11 0.5

EEUFC1C680 16 68 10.8 175 0.800 1.600 5 11 0.5

EEUFC1C820 16 82 13.1 235 0.500 1.000 5 15 0.5

EEUFC1C101 16 100 16.0 290 0.350 0.700 6.3 11.2 0.5

EEUFC1C121 16 120 19.2 290 0.350 0.700 6.3 11.2 0.5

EEUFC1C181 16 180 28.8 400 0.250 0.500 6.3 15 0.5

EEUFC1C221 16 220 35.2 555 0.117 0.234 8 11.5 0.6

EEUFC1C271 16 270 43.2 555 0.117 0.234 8 11.5 0.6

EEUFC1C331 16 330 52.8 555 0.117 0.234 8 11.5 0.6

EEUFC1C391 16 390 62.4 755 0.090 0.180 10 12.5 0.6

EEUFC1C471L 16 470 75.2 730 0.085 0.170 8 15 0.6

EEUFC1C471 16 470 75.2 755 0.090 0.180 10 12.5 0.6

EEUFC1C561 16 560 89.6 1050 0.068 0.136 10 16 0.6

EEUFC1C681L 16 680 108.8 995 0.065 0.130 8 20 0.6

EEUFC1C681 16 680 108.8 1050 0.068 0.136 10 16 0.6

EEUFC1C821 16 820 131.2 1220 0.052 0.104 10 20 0.6

EEUFC1C821S 16 820 131.2 1205 0.065 0.130 12.5 15 0.6

EEUFC1C102S 16 1000 160.0 1220 0.052 0.104 10 20 0.6

EEUFC1C102 16 1000 160.0 1440 0.045 0.090 10 25 0.6

EEUFC1C122 16 1200 192.0 1440 0.045 0.090 10 25 0.6

EEUFC1C122S 16 1200 192.0 1690 0.043 0.086 16 15 0.8

EEUFC1C152L 16 1500 240.0 1815 0.035 0.070 10 30 0.6

EEUFC1C152 16 1500 240.0 1655 0.038 0.076 12.5 20 0.6

EEUFC1C152S 16 1500 240.0 1690 0.043 0.086 16 15 0.8

EEUFC1C182 16 1800 288.0 1945 0.030 0.060 12.5 25 0.6

EEUFC1C182S 16 1800 288.0 2000 0.038 0.076 18 15 0.8

EEUFC1C222 16 2200 352.0 1945 0.030 0.060 12.5 25 0.6

EEUFC1C222S 16 2200 352.0 2205 0.029 0.058 16 20 0.8

EEUFC1C272L 16 2700 432.0 2310 0.025 0.050 12.5 30 0.8

EEUFC1C272 16 2700 432.0 2205 0.029 0.058 16 20 0.8

EEUFC1C332 16 3300 528.0 2510 0.022 0.044 12.5 35 0.8

EEUFC1C332S 16 3300 528.0 2490 0.028 0.056 18 20 0.8

EEUFC1C392 16 3900 624.0 2555 0.022 0.044 16 25 0.8

EEUFC1C392S 16 3900 624.0 2490 0.028 0.056 18 20 0.8

EEUFC1C472 16 4700 752.0 3010 0.018 0.036 16 31.5 0.8

EEUFC1C472S 16 4700 752.0 2740 0.020 0.040 18 25 0.8

EEUFC1C562L 16 5600 896.0 3150 0.016 0.032 16 35.5 0.8

EEUFC1C562 16 5600 896.0 3635 0.016 0.032 18 31.5 0.8

EEUFC1C682 16 6800 1088.0 3360 0.015 0.030 16 40 0.8

EEUFC1C822 16 8200 1312.0 3680 0.015 0.030 18 35.5 0.8

100kHz

Dim. [mm]Impedance

( Ω max.)

Remarks　　　　　　*1 100kHz 105




A type FC series 14



max. max.*1 +20 -10 φD L φ d

EEUFC1E270 25 27 6.7 120 1.300 2.600 4 11 0.45

EEUFC1E390 25 39 9.7 175 0.800 1.600 5 11 0.5

EEUFC1E470 25 47 11.7 175 0.800 1.600 5 11 0.5

EEUFC1E560 25 56 14.0 235 0.500 1.000 5 15 0.5

EEUFC1E820 25 82 20.5 290 0.350 0.700 6.3 11.2 0.5

EEUFC1E101S 25 100 25.0 290 0.350 0.700 6.3 11.2 0.5

EEUFC1E121 25 120 30.0 400 0.250 0.500 6.3 15 0.5

EEUFC1E181 25 180 45.0 555 0.117 0.234 8 11.5 0.6

EEUFC1E221 25 220 55.0 555 0.117 0.234 8 11.5 0.6

EEUFC1E271 25 270 67.5 755 0.090 0.180 10 12.5 0.6

EEUFC1E331L 25 330 82.5 730 0.085 0.170 8 15 0.6

EEUFC1E331 25 330 82.5 755 0.090 0.180 10 12.5 0.6

EEUFC1E391 25 390 97.5 1050 0.068 0.136 10 16 0.6

EEUFC1E471L 25 470 117.5 995 0.065 0.130 8 20 0.6

EEUFC1E471 25 470 117.5 1050 0.068 0.136 10 16 0.6

EEUFC1E561 25 560 140.0 1220 0.052 0.104 10 20 0.6

EEUFC1E561S 25 560 140.0 1205 0.065 0.130 12.5 15 0.6

EEUFC1E681 25 680 170.0 1220 0.052 0.104 10 20 0.6

EEUFC1E821 25 820 205.0 1440 0.045 0.090 10 25 0.6

EEUFC1E821S 25 820 205.0 1655 0.038 0.076 12.5 20 0.6

EEUFC1E102L 25 1000 250.0 1815 0.035 0.070 10 30 0.6

EEUFC1E102 25 1000 250.0 1655 0.038 0.076 12.5 20 0.6

EEUFC1E102S 25 1000 250.0 1690 0.043 0.086 16 15 0.6

EEUFC1E122 25 1200 300.0 1945 0.030 0.060 12.5 25 0.6

EEUFC1E122S 25 1200 300.0 2000 0.038 0.076 18 15 0.8

EEUFC1E152 25 1500 375.0 1945 0.030 0.060 12.5 25 0.6

EEUFC1E152S 25 1500 375.0 2205 0.029 0.058 16 20 0.8

EEUFC1E182L 25 1800 450.0 2310 0.025 0.050 12.5 30 0.8

EEUFC1E182 25 1800 450.0 2205 0.029 0.058 16 20 0.8

EEUFC1E222 25 2200 550.0 2510 0.022 0.044 12.5 35 0.8

EEUFC1E222S 25 2200 550.0 2490 0.028 0.056 18 20 0.8

EEUFC1E272 25 2700 675.0 2555 0.022 0.044 16 25 0.8

EEUFC1E332 25 3300 825.0 3010 0.018 0.036 16 31.5 0.8

EEUFC1E332S 25 3300 825.0 2740 0.020 0.040 18 25 0.8

EEUFC1E392L 25 3900 975.0 3150 0.016 0.032 16 35.5 0.8

EEUFC1E392 25 3900 975.0 3635 0.016 0.032 18 31.5 0.8

EEUFC1E472 25 4700 1175.0 3680 0.015 0.030 18 35.5 0.8

EEUFC1E562 25 5600 1400.0 3735 0.014 0.028 18 40 0.8

100kHz

Dim . [mm]

Impedance

( Ω max.)

Remarks　　　　　　*1 100kHz 105




A type FC series 15



max. max.*1 +20 -10 φD L φ d

EEUFC1V180 35 18 6.3 120 1.300 2.600 4 11 0.45

EEUFC1V220 35 22 7.7 175 0.800 1.600 5 11 0.5

EEUFC1V270 35 27 9.4 175 0.800 1.600 5 11 0.5

EEUFC1V330 35 33 11.5 175 0.800 1.600 5 11 0.5

EEUFC1V390 35 39 13.6 235 0.500 1.000 5 15 0.5

EEUFC1V470 35 47 16.4 290 0.350 0.700 6.3 11.2 0.5

EEUFC1V560 35 56 19.6 290 0.350 0.700 6.3 11.2 0.5

EEUFC1V680 35 68 23.8 290 0.350 0.700 6.3 11.2 0.5

EEUFC1V820 35 82 28.7 400 0.250 0.500 6.3 15 0.5

EEUFC1V101 35 100 35.0 555 0.117 0.234 8 11.5 0.6

EEUFC1V121 35 120 42.0 555 0.117 0.234 8 11.5 0.6

EEUFC1V151 35 150 52.5 555 0.117 0.234 8 11.5 0.6

EEUFC1V181 35 180 63.0 755 0.090 0.180 10 12.5 0.6

EEUFC1V221L 35 220 77.0 730 0.085 0.170 8 15 0.6

EEUFC1V221 35 220 77.0 755 0.090 0.180 10 12.5 0.6

EEUFC1V271 35 270 94.5 1050 0.068 0.136 10 16 0.6

EEUFC1V331L 35 330 115.5 995 0.065 0.130 8 20 0.6

EEUFC1V331 35 330 115.5 1050 0.068 0.136 10 16 0.6

EEUFC1V391 35 390 136.5 1220 0.052 0.104 10 20 0.6

EEUFC1V391S 35 390 136.5 1205 0.065 0.130 12.5 15 0.6

EEUFC1V471 35 470 164.5 1220 0.052 0.104 10 20 0.6

EEUFC1V561 35 560 196.0 1440 0.045 0.090 10 25 0.6

EEUFC1V561S 35 560 196.0 1655 0.038 0.076 12.5 20 0.6

EEUFC1V681L 35 680 238.0 1815 0.035 0.070 10 30 0.6

EEUFC1V681 35 680 238.0 1655 0.038 0.076 12.5 20 0.6

EEUFC1V681S 35 680 238.0 1690 0.043 0.086 16 15 0.8

EEUFC1V821L 35 820 287.0 1945 0.030 0.060 12.5 25 0.6

EEUFC1V821 35 820 287.0 2000 0.038 0.076 18 15 0.8

EEUFC1V102 35 1000 350.0 1945 0.030 0.060 12.5 25 0.6

EEUFC1V102S 35 1000 350.0 2205 0.029 0.058 16 20 0.8

EEUFC1V122L 35 1200 420.0 2310 0.025 0.050 12.5 30 0.8

EEUFC1V122 35 1200 420.0 2205 0.029 0.058 16 20 0.8

EEUFC1V152L 35 1500 525.0 2510 0.022 0.044 12.5 35 0.8

EEUFC1V152 35 1500 525.0 2555 0.022 0.044 16 25 0.8

EEUFC1V152S 35 1500 525.0 2490 0.028 0.056 18 20 0.8

EEUFC1V182L 35 1800 630.0 2655 0.018 0.036 12.5 40 0.8

EEUFC1V182 35 1800 630.0 2555 0.022 0.044 16 25 0.8

EEUFC1V182S 35 1800 630.0 2490 0.028 0.056 18 20 0.8

EEUFC1V222 35 2200 770.0 3010 0.018 0.036 16 31.5 0.8

EEUFC1V222S 35 2200 770.0 2740 0.020 0.040 18 25 0.8EEUFC1V272L 35 2700 945.0 3150 0.016 0.032 16 35.5 0.8

EEUFC1V272 35 2700 945.0 3635 0.016 0.032 18 31.5 0.8EEUFC1V332 35 3300 1155.0 3680 0.015 0.030 18 35.5 0.8

EEUFC1V392 35 3900 1365.0 3735 0.014 0.028 18 40 0.8

100kHz

Dim . [mm]

Impedance

( Ω max.)

Remarks　　　　　　*1 100kHz 105




A type FC series 16

Leakage Rated RipplePart No. V .DC Cap. Current Current

μF μA mA　rmsmax. max.*1 +20 -10 φD L φd

EEUFC1H1R0 50 1.0 3.0 20 2.400 4.800 5 11 0.5

EEUFC1H2R2 50 2.2 3.0 45 1.800 3.600 5 11 0.5

EEUFC1H3R3 50 3.3 3.0 65 1.300 2.600 5 11 0.5

EEUFC1H4R7 50 4.7 3.0 95 1.300 2.600 5 11 0.5

EEUFC1H100 50 10 5.0 90 2.500 5.000 4 11 0.45

EEUFC1H100L 50 10 5.0 125 1.300 2.600 5 11 0.5

EEUFC1H120 50 12 6.0 135 1.300 2.600 5 11 0.5

EEUFC1H150 50 15 7.5 145 1.300 2.600 5 11 0.5

EEUFC1H180 50 18 9.0 155 1.300 2.600 5 11 0.5

EEUFC1H220 50 22 11.0 155 1.300 2.600 5 11 0.5

EEUFC1H270 50 27 13.5 215 0.900 1.800 5 15 0.5

EEUFC1H330 50 33 16.5 260 0.600 1.200 6.3 11.2 0.5

EEUFC1H390 50 39 19.5 260 0.600 1.200 6.3 11.2 0.5

EEUFC1H470 50 47 23.5 260 0.600 1.200 6.3 11.2 0.5

EEUFC1H560 50 56 28.0 360 0.400 0.800 6.3 15 0.5

EEUFC1H680 50 68 34.0 485 0.234 0.468 8 11.5 0.6

EEUFC1H820 50 82 41.0 485 0.234 0.468 8 11.5 0.6

EEUFC1H101 50 100 50.0 615 0.162 0.324 10 12.5 0.6

EEUFC1H121L 50 120 60.0 635 0.155 0.310 8 15 0.6

EEUFC1H121 50 120 60.0 615 0.162 0.324 10 12.5 0.6

EEUFC1H151 50 150 75.0 850 0.119 0.238 10 16 0.6

EEUFC1H181L 50 180 90.0 860 0.120 0.240 8 20 0.6

EEUFC1H181 50 180 90.0 850 0.119 0.238 10 16 0.6

EEUFC1H221 50 220 110.0 1030 0.090 0.180 10 20 0.6

EEUFC1H221S 50 220 110.0 1150 0.110 0.220 12.5 15 0.6

EEUFC1H271 50 270 135.0 1200 0.082 0.164 10 25 0.6

EEUFC1H331L 50 330 165.0 1610 0.060 0.120 10 30 0.6

EEUFC1H331 50 330 165.0 1480 0.063 0.126 12.5 20 0.6

EEUFC1H391 50 390 195.0 1480 0.063 0.126 12.5 20 0.6

EEUFC1H391S 50 390 195.0 1610 0.080 0.160 16 15 0.8

EEUFC1H471L 50 470 235.0 1610 0.060 0.120 10 30 0.6

EEUFC1H471 50 470 235.0 1832 0.050 0.100 12.5 25 0.6

EEUFC1H561 50 560 280.0 1832 0.050 0.100 12.5 25 0.6

EEUFC1H561S 50 560 280.0 1900 0.068 0.136 18 15 0.8

EEUFC1H681L 50 680 340.0 2215 0.040 0.080 12.5 30 0.8

EEUFC1H681 50 680 340.0 1835 0.048 0.096 16 20 0.8

EEUFC1H821L 50 820 410.0 2285 0.034 0.068 12.5 35 0.8

EEUFC1H821 50 820 410.0 2420 0.042 0.084 18 20 0.8

EEUFC1H102L 50 1000 500.0 2590 0.030 0.060 12.5 40 0.8

EEUFC1H102 50 1000 500.0 2235 0.034 0.068 16 25 0.8

EEUFC1H122 50 1200 600.0 2700 0.028 0.056 16 31.5 0.8

EEUFC1H122S 50 1200 600.0 2610 0.029 0.058 18 25 0.8

EEUFC1H152L 50 1500 750.0 2790 0.025 0.050 16 35.5 0.8

EEUFC1H182L 50 1800 900.0 2845 0.023 0.046 16 40 0.8

EEUFC1H182 50 1800 900.0 3000 0.025 0.050 18 31.5 0.8

EEUFC1H222 50 2200 1100.0 3100 0.023 0.046 18 35.5 0.8

100kHz

Dim. [mm]Impedance

( Ω max.)

Remarks　　　　　　*1 100kHz 105




A type FC series 17



max. max.*1 +20 -10 φD L φ d

EEUFC1J6R8 63 6.8 4.2 80 3.500 7.000 4 11 0.45

EEUFC1J120 63 12 7.5 145 2.000 4.000 5 11 0.5

EEUFC1J180 63 18 11.3 200 1.300 2.600 5 15 0.5

EEUFC1J220 63 22 13.8 240 1.000 2.000 6.3 11.2 0.5

EEUFC1J330 63 33 20.7 240 1.000 2.000 6.3 11.2 0.5

EEUFC1J390 63 39 24.5 330 0.700 1.400 6.3 15 0.5

EEUFC1J470 63 47 29.6 405 0.342 0.684 8 11.5 0.6

EEUFC1J560 63 56 35.2 405 0.342 0.684 8 11.5 0.6

EEUFC1J680 63 68 42.8 405 0.342 0.684 8 11.5 0.6

EEUFC1J820 63 82 51.6 535 0.256 0.512 10 12.5 0.6

EEUFC1J101L 63 100 63.0 535 0.230 0.460 8 15 0.6

EEUFC1J101 63 100 63.0 535 0.256 0.512 10 12.5 0.6

EEUFC1J121 63 120 75.6 600 0.194 0.388 10 16 0.6

EEUFC1J151 63 150 94.5 690 0.178 0.356 8 20 0.6

EEUFC1J181 63 180 113.4 885 0.147 0.294 10 20 0.6

EEUFC1J181S 63 180 113.4 1020 0.150 0.300 12.5 15 0.6

EEUFC1J221X 63 220 138.6 885 0.147 0.294 10 20 0.6

EEUFC1J221 63 220 138.6 1050 0.130 0.260 10 25 0.6

EEUFC1J221S 63 220 138.6 1285 0.085 0.170 12.5 20 0.6

EEUFC1J271 63 270 170.1 1410 0.090 0.180 16 15 0.8

EEUFC1J331L 63 330 207.9 1300 0.090 0.180 10 30 0.6

EEUFC1J331 63 330 207.9 1285 0.085 0.170 12.5 20 0.6

EEUFC1J391 63 390 245.7 1720 0.070 0.140 12.5 25 0.6

EEUFC1J391S 63 390 245.7 1690 0.086 0.172 18 15 0.8

EEUFC1J471L 63 470 296.1 2090 0.055 0.110 12.5 30 0.8

EEUFC1J471 63 470 296.1 1765 0.059 0.118 16 20 0.8

EEUFC1J561 63 560 352.8 2160 0.050 0.100 16 25 0.8

EEUFC1J681L 63 680 428.4 2265 0.047 0.094 12.5 35 0.8

EEUFC1J681 63 680 428.4 2160 0.050 0.100 16 25 0.8

EEUFC1J681S 63 680 428.4 2290 0.055 0.110 18 20 0.8

EEUFC1J821L 63 820 516.6 2560 0.042 0.084 12.5 40 0.8

EEUFC1J821 63 820 516.6 2670 0.043 0.086 16 31.5 0.8

EEUFC1J821S 63 820 516.6 2585 0.043 0.086 18 25 0.8

EEUFC1J102U 63 1000 630.0 2670 0.043 0.086 16 31.5 0.8

EEUFC1J102 63 1000 630.0 2770 0.036 0.072 16 35.5 0.8

EEUFC1J122L 63 1200 756.0 2825 0.030 0.060 16 40 0.8

EEUFC1J122 63 1200 756.0 2950 0.032 0.064 18 31.5 0.8

EEUFC1J152 63 1500 945.0 3095 0.030 0.060 18 35.5 0.8

EEUFC1J182 63 1800 1134.0 3205 0.025 0.050 18 40 0.8

100kHz

Dim . [mm]

Impedance

( Ω max.)

Remarks　　　　　　*1 100kHz 105




A type FC series 18



max. max.*1 +20 -10 φD L φ d

EEUFC2A5R6 100 5.6 5.6 80 4.100 8.200 5 11 0.5

EEUFC2A8R2 100 8.2 8.2 90 2.800 5.600 5 15 0.5

EEUFC2A120 100 12 12.0 114 1.800 3.600 6.3 11.2 0.5

EEUFC2A180 100 18 18.0 155 1.100 2.200 6.3 15 0.5

EEUFC2A220 100 22 22.0 260 0.680 1.360 8 11.5 0.6

EEUFC2A330L 100 33 33.0 340 0.450 0.900 8 15 0.6

EEUFC2A330 100 33 33.0 306 0.530 1.060 10 12.5 0.6

EEUFC2A390L 100 39 39.0 455 0.330 0.660 8 20 0.6

EEUFC2A390 100 39 39.0 400 0.360 0.720 10 16 0.6

EEUFC2A560 100 56 56.0 463 0.240 0.480 10 20 0.6

EEUFC2A680L 100 68 68.0 599 0.210 0.420 10 25 0.6

EEUFC2A680 100 68 68.0 511 0.230 0.460 12.5 15 0.6

EEUFC2A101L 100 100 100.0 698 0.150 0.300 10 30 0.6

EEUFC2A101 100 100 100.0 671 0.180 0.360 12.5 20 0.6

EEUFC2A151 100 150 150.0 807 0.110 0.220 12.5 25 0.6

EEUFC2A181L 100 180 180.0 937 0.098 0.196 12.5 30 0.6

EEUFC2A221L 100 220 220.0 1040 0.087 0.174 12.5 35 0.6

EEUFC2A271L 100 270 270.0 1130 0.072 0.144 12.5 40 0.6

EEUFC2A121S 100 120 120.0 793 0.140 0.280 16 15 0.8

EEUFC2A151S 100 150 150.0 917 0.120 0.240 18 15 0.8

EEUFC2A181 100 180 180.0 995 0.110 0.220 16 20 0.8

EEUFC2A221 100 220 220.0 1170 0.089 0.178 16 25 0.8

EEUFC2A271S 100 270 270.0 1230 0.080 0.160 18 20 0.8

EEUFC2A331 100 330 330.0 1520 0.062 0.124 16 31.5 0.8

EEUFC2A331S 100 330 330.0 1420 0.070 0.014 18 25 0.8

EEUFC2A391L 100 390 390.0 1730 0.035 0.106 16 35.5 0.8

EEUFC2A391 100 390 390.0 1600 0.062 0.124 18 31.5 0.8

EEUFC2A471 100 470 470.0 1920 0.047 0.094 16 40 0.8

EEUFC2A561 100 560 560.0 1770 0.041 0.082 18 33.5 0.8

EEUFC2A681 100 680 680.0 2300 0.036 0.072 18 40 0.8

100kHz

Dim . [mm]

Impedance

( Ω max.)

Remarks　　　　　　*1 100kHz 105




A type FC series 19

Snap-In Lead Formed Type ( Matsushita Part No. Suffix : E )

φ4～φ8

φ10～φ18

　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　 * Direction of bending is random.

　　　　

　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　[mm]φD H1±0.5 H2 H3 max. F±0.5 P E max. φd±0.05 P.W.B

φ t 4 4.5 2.7 2.5 5.0 0.95 1.0 0.45 0.9 1.6 5 4.5 2.7 2.5 5.0 1.00 1.0 0.50 0.9 1.6 6.3 4.5 2.7 2.5 5.0 1.00 1.0 0.50 1.0 1.6 8　 4.5 2.7 2.5 5.0 1.00 1.0 0.60 1.0 1.6 10　 4.5 2.7 －　 5.0 1.00 1.0 0.60 1.0 1.6 12.5 4.5 2.7 －　 5.0 1.00 1.0 0.60 1.0 1.6

4.5 2.7 －　 5.0 0.90 1.0 0.80 1.1 1.6 16　 4.5 2.7 －　 7.5 0.90 1.0 0.80 1.1 1.6 18　 4.5 2.7 －　 7.5 0.90 1.0 0.80 1.1 1.6

Remarks *The lead forming dimensions above shall only be subjected to our outgoing inspection and

not to the customer's incoming inspection.

Due to the application of mechanical stress during transportation, actual dimensions might

not meet the specification.



φD+0.5max.P

E

FH2

H1H3

φd or

φD+0.5max.

φd

PE

F

H2

H1


A type FC series 20

　　Lead Taping ( Body Diameter φ4 ～φ6. 3 ) The Suffix of Matsushita Taping Part Number : H

　　　1) Applicable Range

This specification is applied to products, which are Aluminum Electrolytic Capacitors (JIS04 type)

that taped with single tape.

　　　2) Taping Shape & Dimensions

　 φ4 ,φ5 φ6.3

　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　 [mm]Item Symbol Dimensions Tolerance Remarks

Body diameter φD 4 5 6.3 +0.5 　　　　　　　　　　　　　　Body length L 11.0 ～ 15.0 　　　　　　　　　　　　　　Lead wire diameter φd 0.45 0.5 ±0.05 　　　　　　　　　　　　　　Body pitch P 12.7 ±1.0 　　　　　　　　　　　　　　Feed hole pitch *1 P0 12.7 ±0.2 　　　　　　　　　　　　　　

Specified by the contact surface betweentape & lead

Feed hole center to product center 　　　　　　　　　　　　　　


Mount tape W 18.0 ±0.5 　　　　　　　　　　　　　　Adhesive tape W0 6.0 ≦ 　　　　　　　　　　　　　　Hole position W1 9.0 ±0.5 　　　　　　　　　　　　　　Adhesive tape slipping W2 0 ～ 1.5 　　　　　　　　　　　　　　Height of product +0.75from the center -0.50 　Feed hole diameter φD0 4.0 ±0.2Inclination of body h 1.0 ≧ Specified by the top of an aluminum canInclination of body P 1.0 ≧ Specified by the top of an aluminum canTotal tape thickness t 0.6 ±0.3 CP wire is excluded

H 18.50

P2 　　　　　 6.35　　　　　 ±1.00

Hole center to lead

Lead to lead distance

P1

F

5.1

2.5

±0.5

±0.5

　　 *1 Cumulative deviation of “feed hole pitch” shall be less than 1 mm in 20 sections.

Remarks



P2 P

FP1

P0

W

W2W0

W1

H

t

φDP

L

h

φd φD0

P2 P

FP1

P0

W

W2W0

W1

H

t

φDP

L

h

φD0φd


A type FC series 21

　　Lead Taping ( Body Diameter φ4 ～φ8 ) The Suffix of Matsushita Taping Part Number : B





　 φ4,φ5,φ6.3 φ8

　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　[mm]

Item Symbol Dimensions Tolerance RemarksBody diameter φD 4 5 6.3 8 +0.5 　　　　　　　　　　　　　　Body length L 11.0 ～ 20.0 　　　　　　　　　　　　　　Lead wire diameter φd 0.45 0.5 0.6 ±0.05 　　　　　　　　　　　　　　Body pitch P 12.7 ±1.0 　　　　　　　　　　　　　　Feed hole pitch *1 P0 12.7 ±0.2 　　　　　　　　　　　　　　



+0.8 Specified by the contact surface between

-0.2 tape & leadMount tape W 18.0 ±0.5 　　　　　　　　　　　　　　Adhesive tape W0 6.0 ≦ 　　　　　　　　　　　　　　Hole position W1 9.0 ±0.5 　　　　　　　　　　　　　　Adhesive tape slipping W2 0 ～ 1.5 　　　　　　　　　　　　　　Height of product +0.75from the center -0.50 　Lead wire clinch height H0 16.0 ±0.5Feed hole diameter φD0 4.0 ±0.2Inclination of body h 1.0 ≧ Specified by the top of an aluminum canInclination of body P 1.0 ≧ Specified by the top of an aluminum canTotal tape thickness t 0.6 ±0.3 CP wire is excluded

±1.00

Hole center to lead


P1

F

3.85

5.0

±0.5

H

P2 　　　　　6.35　　　　　

17.5 18.5 20.0

*1 Cumulative deviation of “feed hole pitch” shall be less than 1 mm in 20 sections.

*2 Lead forming angle

A=90°min

Remarks



A

P2 P

FP1

P0 φd

W

W2W0 W1

H0H

t

φDP h

φD0

P2 P

FP1

P0

W

W2

W0

W1

H0H

t

φDP h

φD0φd


A type FC series 22

　　Lead Taping ( Body Diameter φ10 ,φ12.5 ) The Suffix of Matsushita Taping Part Number : B





　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　[mm]

Item Symbol Dimensions Tolerance RemarksBody diameter φD 10 12.5 +0.5 　　　　　　　　　　　　　　Body length L 12.5 ～ 25.0 　　　　　　　　　　　　　　Lead wire diameter φd 0.60 ±0.05 　　　　　　　　　　　　　　Body pitch P 12.7 15.0 ±1.0 　　　　　　　　　　　　　　Feed hole pitch *1 P0 12.7 15.0 ±0.2 　　　　　　　　　　　　　　



+0.8 Specified by the contact surface between-0.20 tape & lead


5.0

±0.53.85

H 18.50

P2

5.00

6.35　　　　　 7.50 ±1.00

Hole center to lead


P1

F


Remarks



P2 P

FP1

P0

W

W2W0

W1

H

tφDP

L

h

φD0φd


A type FC series 23

　　Lead Taping ( Body Diameter φ16 ,φ18 ) The Suffix of Matsushita Taping Part Number : B





　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　[mm]

Item Symbol Dimensions Tolerance RemarksBody diameter φD 16 18 +0.5 　　　　　　　　　　　　　　Body length L 15.0 ～ 25.0 　　　　　　　　　　　　　　Lead wire diameter φd 0.80 ±0.05 　　　　　　　　　　　　　　Body pitch P 30.0 ±1.0 　　　　　　　　　　　　　　Feed hole pitch *1 P0 15.0 ±0.2 　　　　　　　　　　　　　　





Hole center to lead


P1

F 7.5

±0.5

H 18.50

P2

3.75

7.5

±0.5

±1.00


Remarks



W

P0 t

HL

P2 P

FP1

P

φD

h

φD0 φd

W1

W2

W0


A type FC series 24

1. Taping Method

1-1 The capacitors shall be placed vertically on the base tape, and their lead wires are fixed with

the adhesive tape. In addition, the direction of polarity is standardized as the base tape

is situated underneath of an adhesive tape, and lead wires with the same polarity are placed on

the right hand side (the direction of polarity for bipolar products is not specified).

(Examples)

　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　*Polarity direction

　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　 φ4 ～φ12.5 : Negative polarity on the right.

　　φ16 ～φ18 : Positive polarity on the right.

1-2 After taping, there shall be no more than three blank spaces without lead wires on the base tape.

The number of blank spaces within a packing unit (an inner carton) is not restricted, however,

the specified packing quantity must be satisfied.

　 1-3　 The connection method is as follows. The portion shall meet the general taping specification.

　　　 The position of connection shall not be restricted.

Note ) When connecting two base tapes, they shall not be piled on top of each other.

Base tapes shall not be connected with each other by using staples.

Remarks



Connecting pointBaseAdhesive tape

Connect with theadhesive tape


A type FC series 25

1-4 In case of removing the products after taping, lead wires shall be cut or the capacitor

shall be pulled out.

　　　　　　 The length of remaining lead wire shall be less than 2.0 mm from the upper edge of

the base tape.

　 1-5 Tensile strength of lead wire after taping (specified for the positive lead wire only) :

　　　　　 Fix the tape as below and pull the positive lead wire to the vertical direction by using the

push pull scale.

　　 The tensile strength shall be greater than 2. 94 N.

　　　　　　 After continuously storing in an atmosphere of 40±2 and 90 ～ 98% R. H. for 250 hours,

the taped products shall meet the specification above, and there shall be no inclination

of the capacitors or covering of holes with the adhesive.

Remarks



2mm max.Lead wire

Base

Adhesivetape

Push pull scale

Lead wire

Fixed


A type FC series 26

　2. Packing Method

2-1 Taped products shall be packed in an inner carton ( the smallest packing unit ) in the zigzag pattern.

In an inner carton, the lead wires with positive polarity are not to be placed on the top of lead wires

with negative polarity and vice versa (however, the last sentence does not apply to bipolar products).

(Examples)

2-2 Polarity identifications on an inner carton shall match the polarity of products situated inside

the inner carton.

　　 2-3 Inner cartons shall be handled as follows.

* No more than 10 inner cartons shall be piled on top of each other.

* In case of situating cartons in upright position, the indication of polarity shall be faced upward.

* The products shall be handled with care.

　　　2-4 The inner cartons shall be packed in a cardboard box for transportation.

　　　Products with various part numbers can be packed in an outer carton upon request.

However, each inner carton (the smallest packing unit) shall only contain products

with the same part number.

Remarks



Inner packing

φ4～φ8 φ10～φ18

case

No unit atthe corner.

< Right > < Wrong >


A type FC series 27

2-5 The shape & dimensions of inner cartons shall be as follows.

(a) (ｂ) (c)φD Lφ4 ～ 8 ～ 20 340 55 320φ10 ～ 16 340 55 320

20 340 62 32025 340 66 330

φ12.5 15 ～ 20 340 65 32025 340 66 330

φ16 ～ 18 15 ～ 20 340 62 33025 340 66 330

Can size

Note : The dimensions listed above are subject to

change without notice, depending on the

auto-insert machine.

2-6 Packing quantity

Inner carton quantity Outer carton quantity

Min. packing quantity（pcs）（pcs）

φ 4 2,000 10,000φ 5 2,000 10,000φ 6.3 2,000 10,000φ 8 1,000 5,000φ 10 500 2,000φ 12.5 500 2,000φ 16 250 1,000φ 18 250 1,000

Product diameter

(mm)

3. Storage 　 3-1 With respect to the handling method, follow Item 2-3 in this specification.

3-2 Products shall be out of direct sun light. In addition, the temperature and humidity shall be normal.

4. Ordering Unit 　 The order shall be placed with a multiple of the inner carton quantity.

Examples : φ4 ～φ6. 3 : minimum 2000 pcs

φ8 : minimum 1000 pcs

φ10 ～φ12. 5 : minimum 500 pcs

φ16 ～φ18 : minimum 250 pcs

Remarks

　　　　　　　　　* Label On the Packaging Box by English



(b)

(c)

(a)


Application Guidelines 28

1. Circuit Design1. Circuit Design1. Circuit Design1. Circuit Design 1.1 Operating Temperature and Frequency1.1 Operating Temperature and Frequency1.1 Operating Temperature and Frequency1.1 Operating Temperature and Frequency Electrical parameters for electrolytic capacitors are normally specified at 20 temperature and 120 Hz frequency. These parameters vary with changes in temperature and frequency. Circuit designers should take these changes into consideration.

(1) Effects of operating temperature on electrical parametersa) At higher temperatures, leakage current and capacitance increase while equivalent series resistance (ESR) decreases.b) At lower temperatures, leakage current and capacitance decrease while equivalent series resistance (ESR) increases.

(2) Effects of frequency on electrical parameters a) At higher frequencies, capacitance and impedance decrease while tanδ increases. b) At lower frequencies, heat generated by ripple current will rise due to an increase in equivalent series resistance (ESR).

1.2 Operating Temperature and Life Expectancy1.2 Operating Temperature and Life Expectancy1.2 Operating Temperature and Life Expectancy1.2 Operating Temperature and Life Expectancy(1) Expected life is affected by operating temperature. Generally, each 10 reduction in temperature will double the expected life.

Use capacitors at the lowest possible temperature below the upper category temperature.

(2) If operating temperatures exceed the upper category limit, rapid deterioration of electrical parameter will occur and irreversible damage will result.

Check for the maximum capacitor operating temperatures including ambient temperature, internal capacitor temperature rise due to ripple current, and the effects of radiated heat from power transistors, IC's or resistors. Avoid placing components, which could conduct heat to the capacitor from the back side of the circuit board.

(3)　The formula for calculating expected life at lower operating temperatures is as follows ;

１０

ーＴＴ

１２

２１

２ＬＬ ×=L1 : Guaranteed life (h) at temperature, T1L2 : Expected life (h) at temperature, T2T1 : Upper category temperature ()T2 : Actual operating temperature, ambient temperature + temperature rise due to ripple current heating()

1.3 Common Application Conditions to Avoid1.3 Common Application Conditions to Avoid1.3 Common Application Conditions to Avoid1.3 Common Application Conditions to Avoid The following misapplication load conditions will cause rapid deterioration of a capacitor’s electrical parameters. In addition, rapid heating and gas generation within the capacitor can occur, causing the pressure relief vent to operate and resultant leakage of electrolyte. Under extreme conditions, explosion and fire ignition could result.

The leaked electrolyte is combustible and electrically conductive.

(1) Reverse Voltage DC capacitors have polarity. Verify correct polarity before insertion. For circuits with changing or uncertain polarity, use DC bipolar capacitors. DC bipolar capacitors are not suitable for use in AC circuits.

(2) Charge / Discharge Applications Standard capacitors are not suitable for use in repeating charge/discharge applications. For charge/discharge applications, consult us with your actual application condition.

(3) Over voltage Do not apply voltages exceeding the maximum specified rated voltage. Voltages up to the surge voltage rating are acceptable for short periods of time. Ensure that the sum of the DC voltage and the superimposed AC ripple voltage does not exceed the rated voltage.

(4) Ripple Current Do not apply ripple currents exceeding the maximum specified value. For high ripple current applications, use a capacitor designed for high ripple currents. In addition, consult us if the applied ripple current is to be higher than the maximum specified value. Ensure that rated ripple currents that superimposed on low DC bias voltages do not cause reverse voltage conditions.

1.4 Using Two or More Capacitors in Series or Parallel1.4 Using Two or More Capacitors in Series or Parallel1.4 Using Two or More Capacitors in Series or Parallel1.4 Using Two or More Capacitors in Series or Parallel (1) Capacitors Connected in Parallel The circuit resistance can closely approximate the series resistance of the capacitor, causing an imbalance of ripple current loads within the capacitors. Careful wiring methods can minimize the possible application of an excessive ripple current to a capacitor.

(2) Capacitors Connected in Series Differences in normal DC leakage current among capacitors can cause voltage imbalances. The use of voltage divider shunt resistors with consideration to leakage currents can prevent capacitor voltage imbalances.





1.5 Capacitor Mounting Considerations1.5 Capacitor Mounting Considerations1.5 Capacitor Mounting Considerations1.5 Capacitor Mounting Considerations (1) Double-Sided Circuit Boards Avoid wiring pattern runs, which pass between the mounted capacitor and the circuit board. When dipping into a solder bath, an excess solder may deposit under the capacitor by capillary action, causing short circuit between anode and cathode terminals.

(2) Circuit Board Hole Positioning The vinyl sleeve of the capacitor can be damaged if solder passes through a lead hole into the subsequently processed parts. Special care when locating hole positions in proximity to capacitors is recommended.

(3) Circuit Board Hole Spacing The spacing of circuit board holes should match the lead wire spacing of capacitors within the specified tolerances. Incorrect spacing can cause an excessive lead wire stress during the insertion process. This may result in premature capacitor failure due to the short or open circuit, increased leakage current, or electrolyte leakage.

(4) Clearance for Case Mounted Pressure Relief Capacitors with case mounted pressure relief require sufficient clearance to allow proper pressure relief operation. The minimum clearances are dependent of capacitor diameters as follows. φ6. 3 ～ φ16 mm : 2 mm minimum, φ18 ～ φ35 mm : 3 mm minimum, φ40 mm or greater : 5 mm minimum.

(5) Clearance for Seal Mounted Pressure Relief Provide a hole on a circuit board to relieve gas when a pressure relief of a capacitor is situated underneath of the circuit board.

(6) Wiring Near the Pressure Relief Avoid locating high voltage, high current wiring, or circuit board paths above the pressure relief . Flammable, high temperature gas that exceeds 100 may be released and could dissolve the wire insulation and ignite.

(7) Circuit Board Patterns Under the Capacitor Avoid circuit board runs underneath the capacitor, as an electrical short can occur due to an electrolyte leakage.

(8) Screw Terminal Capacitor Mounting Do not orient the capacitor with the screw terminal side of the capacitor facing downward. Tighten the terminal and mounting bracket screws within the torque range specified in the specification.

1.6 Electrical Isolation of the Capacitor1.6 Electrical Isolation of the Capacitor1.6 Electrical Isolation of the Capacitor1.6 Electrical Isolation of the Capacitor Completely isolate the capacitor as follows. (1) Between the cathode and the case (except for axially leaded B types) and between the anode terminal and other circuit paths. (2) Between the extra mounting terminals (on T types) and the anode terminal, cathode terminal, and other circuit paths.

1.7 Capacitor Sleeve1.7 Capacitor Sleeve1.7 Capacitor Sleeve1.7 Capacitor Sleeve The vinyl sleeve or laminate coating is intended for marking and identification purposes and is not meant to electrically insulate the capacitor. The sleeve may split or crack if immersed into solvents such as toluene or xylene and then subsequently exposed to high temperatures.

CAUTION!　Always consider safety when designing equipment and circuits.　Plan for the worst case failure modes such as short circuits and open circuits, which could occur use.

(1) Provide protection circuits and protection devices to allow safe failure modes.(2) Design redundant or secondary circuits where possible to assure the continued

operation in case of main circuit failure.





2. Capacitor Handling Techniques2. Capacitor Handling Techniques2. Capacitor Handling Techniques2. Capacitor Handling Techniques 2.1 Considerations Before Using 2.1 Considerations Before Using 2.1 Considerations Before Using 2.1 Considerations Before Using (1) Capacitors have a finite life. Do not reuse or recycle capacitors from used equipment. (2) Transient recovery voltage may be generated in the capacitor due to dielectric absorption.

Ｉｆ required, this voltage can be discharged with a resistor with a value of about 1k Ω. (3) Capacitors stored for a long period of time may exhibit an increase in leakage current.

This can be corrected by gradually applying rated voltage in series with a resistor of approximately 1k Ω. (4) If capacitors are dropped, they can be damaged mechanically or electrically. Avoid using dropped capacitors.

(5) Dented or crushed capacitors should not be used. The seal integrity can be damaged and loss of electrolyte/shortened life canresult.

2.2 Capacitor Insertion2.2 Capacitor Insertion2.2 Capacitor Insertion2.2 Capacitor Insertion (1) Verify the correct capacitance and rated voltage of the capacitor. (2) Verify the correct polarity of the capacitor before insertion. (3) Verify the correct hole spacing before insertion (land pattern size on chip type) to avoid stress on the terminals. (4) Ensure that the lead clinching operation done by auto insertion equipments does not stress the capacitor leads where they enter the　　　 seal of the capacitor. For chip type capacitors, excessive mounting pressure can cause high leakage current, short circuit, or disconnection.

2.3 Manual Soldering2.3 Manual Soldering2.3 Manual Soldering2.3 Manual Soldering (1) Apply soldering conditions (temperature and time) based on the specification, or do not exceed temperature of 350 for 3 seconds or less. (2) If lead wires must be modified to meet terminal board hole spacing, avoid stress on the lead wire where it enters the capacitor seal. (3) If a soldered capacitor must be removed and reinserted, avoid excessive stress on the capacitor leads. (4) Avoid physical contacts between the tip of the soldering iron and capacitors to prevent melting of the vinyl sleeve.

2.4 Flow Soldering2.4 Flow Soldering2.4 Flow Soldering2.4 Flow Soldering(1) Do not immerse the capacitor body into the solder bath as excessive internal pressure could result.(2) Apply proper soldering conditions (temperature, time, etc.). Do not exceed the specified limits.(3) Do not allow other parts or components to touch the capacitor during soldering.

2.5 Other Soldering Considerations2.5 Other Soldering Considerations2.5 Other Soldering Considerations2.5 Other Soldering Considerations Rapid temperature rise during the preheat operation and resin bonding operation can cause cracking of the capacitor’s vinyl sleeve. For heat curing, do not exceed 150 for the maximum time of 2 minutes. 2.6 Capacitor Handling after Soldering2.6 Capacitor Handling after Soldering2.6 Capacitor Handling after Soldering2.6 Capacitor Handling after Soldering (1) Avoid moving the capacitor after soldering to prevent excessive stress on the lead wires where they enter the seal. (2) Do not use the capacitor as a handle when moving the circuit board assembly. (3) Avoid striking the capacitor after assembly to prevent failure due to excessive shock.

2.7 Circuit Board Cleaning2.7 Circuit Board Cleaning2.7 Circuit Board Cleaning2.7 Circuit Board Cleaning(1) Circuit boards can be immersed or ultrasonically cleaned using suitable cleaning solvents for up to 5 minutes

and up to 60 maximum temperatures. The boards should be thoroughly rinsed and dried.

The use of ozone depleting cleaning agents is not recommended for the purpose of protecting our environment.

(2) Avoid using the following solvent groups unless specifically allowed in the specification ; ・ Halogenated cleaning solvents : except for solvent resistant capacitor types, halogenated solvents can permeate the seal and cause internal capacitor corrosion and failure. For solvent resistant capacitors, carefully follow the temperature and time requirements based on the specification. 1-1-1 trichloroethane should never be used on any aluminum electrolytic capacitor. ・ Alkaline solvents : could react and dissolve the aluminum case. ・ Petroleum based solvents : deterioration of the rubber seal could result. ・ Xylene : deterioration of the rubber seal could result. ・ Acetone : removal of the ink markings on the vinyl sleeve could result.

(3) A thorough drying after cleaning is required to remove residual cleaning solvents that may be trapped between the capacitor and the circuit board. Avoid drying temperatures, which exceed the Upper category temperature of the capacitor.

(4) Monitor the contamination levels of the cleaning solvents during use in terms of electrical conductivity, pH, specific gravity, or water content. Chlorine levels can rise with contamination and adversely affect the performance of the capacitor.

Please consult us if you are not certain about acceptable cleaning solvents or cleaning methods.

.





2.8 Mounting Adhesives and Coating Agents2.8 Mounting Adhesives and Coating Agents2.8 Mounting Adhesives and Coating Agents2.8 Mounting Adhesives and Coating Agents When using mounting adhesives or coating agents to control humidity, avoid using materials containing halogenated solvents. Also, avoid the use of chloroprene based polymers.

Harden on dry adhesive or coating agents well lest the solvent should be left.

After applying adhesives or coatings, dry thoroughly to prevent residual solvents from being trapped between the capacitor and the circuit board.

2.9 2.9 2.9 2.9 FumigationFumigationFumigationFumigation　　 In exporting electronic appliances with aluminum electrolytic capacitors, in some cases fumigation treatment using such halogen compound as methyl bromide is conducted for wooden boxes. If such boxes are not dried well, the halogen left in the box is dispersed while transported and enters in the capacitors inside. This possibly causes electrical corrosion of the capacitors. Therefore, after performing fumigation and drying make sure that no halogen is left. Don’t perform fumigation treatment to the whole electronic appliances packed in a box.

3. Precautions for using capacitors3. Precautions for using capacitors3. Precautions for using capacitors3. Precautions for using capacitors 3.1 Environmental Conditions 3.1 Environmental Conditions 3.1 Environmental Conditions 3.1 Environmental Conditions Capacitors should not be stored or used in the following environments.

(1) Exposure to temperatures above the upper category or below the lower category temperature of the capacitor. (2) Direct contact with water, salt water, or oil. (3) High humidity conditions where water could condense on the capacitor. (4) Exposure to toxic gases such as hydrogen sulfide, sulfuric acid, nitric acid, chlorine, Chlorine compound,

Bromine, Bromine compound or ammonia. (5) Exposure to ozone, radiation, or ultraviolet rays.

(6) Vibration and shock conditions exceeding specified requirements.

3.2 Electrical Precautions3.2 Electrical Precautions3.2 Electrical Precautions3.2 Electrical Precautions(1) Avoid touching the terminals of a capacitor as a possible electric shock could result. The exposed aluminum case is not insulated and could also cause electric shock if touched.(2) Avoid short circuiting the area between the capacitor terminals with conductive materials including liquids such

as acids or alkaline solutions.

4. Emergency Procedures4. Emergency Procedures4. Emergency Procedures4. Emergency Procedures(1) If the pressure relief of the capacitor operates, immediately turn off the equipment and disconnect from the power source. This will minimize an additional damage caused by the vaporizing electrolyte.

(2) Avoid contact with the escaping electrolyte gas, which can exceed 100 temperatures. If electrolyte or gas enters the eye, immediately flush the eye with large amounts of water. If electrolyte or gas is ingested by mouth, gargle with water. If electrolyte contacts the skin, wash with soap and water.

5. Long Term Storage5. Long Term Storage5. Long Term Storage5. Long Term StorageLeakage current of a capacitor increases with long storage times. The aluminum oxide film deteriorates as a function of temperatureand time. If used without reconditioning, an abnormally high current will be required to restore the oxide film.This surge current could cause the circuit or the capacitor to fail. After one year, a capacitor should be reconditioned by applying therated voltage in series with a 1000 Ω current limiting resistor for a time period of 30 minutes.

5.1 Environmental Conditions5.1 Environmental Conditions5.1 Environmental Conditions5.1 Environmental Conditions (1) Exposure to temperatures above the upper category or below the lower category temperature of the capacitor. (2) Direct contact with water, salt water, or oil. (3) High humidity conditions where water could condense on the capacitor. (4) Exposure to toxic gases such as hydrogen sulfide, sulfuric acid, nitric acid, chlorine, Chlorine compound,

Bromine, Bromine compound or ammonia. (5) Exposure to ozone, radiation, or ultraviolet rays. (6) Vibration and shock conditions exceeding specified requirements.

6. Capacitor Disposal6. Capacitor Disposal6. Capacitor Disposal6. Capacitor Disposal When disposing capacitors, use one of the following methods.

(1) Incinerate after crushing the capacitor or puncturing the can wall (to prevent explosion due to internal pressure rise). Capacitors should be incinerated at high temperatures to prevent the release of toxic gases such as chlorine from 　　 the polyvinyl chloride sleeve, etc. (2) Dispose as solid waste.

　　　NOTE : Local laws may have specific disposal requirements which must be followed.



Electrolytic Capacitor Product Specification CE-AFC … Capacitor Product Specification...

Documents

Transcript of Electrolytic Capacitor Product Specification CE-AFC … Capacitor Product Specification...